A type of As2S3 chalcogenide glass mid-infrared dual-core photonic crystal fiber has been proposed. The dualcore photonic crystal fiber （PCF） consists of two asymmetric cores. The high polarization property and the ...A type of As2S3 chalcogenide glass mid-infrared dual-core photonic crystal fiber has been proposed. The dualcore photonic crystal fiber （PCF） consists of two asymmetric cores. The high polarization property and the coupling characteristics have been studied by using the finite dement method and mode coupling theory. Numerical results show that the birefringence at wavelength λ = 10 μm is up to 0.01386 and the coupling length can reach wavelength = 5 μm, 261 μm and 271.44 μm for x-polarized mode and y-polarized mode, respectively. It demonstrates that a 6.786-ram-long fiber can exhibit an extinction ratio of better than -10 dB and a bandwidth of 180 nm.展开更多
We have proposed a novel kind of photonic crystal fiber which contains two asymmetric cores. The bireti＇ingence and the dispersion are numerically analyzed based on finite element method when the size of the air hole...We have proposed a novel kind of photonic crystal fiber which contains two asymmetric cores. The bireti＇ingence and the dispersion are numerically analyzed based on finite element method when the size of the air holes and the pitch of two adjacent air holes are changed. It is shown that the proposed photonic crystal fiber has high birefringence up to the order of 10-2 and double-zero dispersion points are at the wavelengths of 1310 nm and 800 rim, simultaneously. At the same time, the normalized power and the extinction ratios of the proposed photonic crystal fiber have been simulated. It is demonstrated that, at the wavelength of 1310 rim, the x-polarized mode and the y-polarized mode are separated when the propagation distance is 2.481 ram.展开更多
An ultra-broadband polarization splitter based on graphene layer-filled dual-core photonic crystal fiber （GDC-PCF） that can work in a wavelength range from 1120 nm to 1730 nm is proposed in this paper. Through optim...An ultra-broadband polarization splitter based on graphene layer-filled dual-core photonic crystal fiber （GDC-PCF） that can work in a wavelength range from 1120 nm to 1730 nm is proposed in this paper. Through optimizing fiber configuration, the polarization splitter has an extinction ratio of-56.3 dB at 1.55 μm with a fiber length of 4.8 mm. Compared with the photonic crystal fiber reported splitters, to our knowledge, the GDC-PCF splitter with the extinction ratio below-20 dB has a super wide bandwidth of 610 nm. Due to the excellent splitting characteristics, the GDC-PCF will be used in coherent optical communication systems in a wavelength range from infrared to mid-infraed.展开更多
The research of high-performance polarization controllers is of great significance for expanding the application field of polarization optics. Here, a polarization switch is demonstrated by using a dual-core photonic ...The research of high-performance polarization controllers is of great significance for expanding the application field of polarization optics. Here, a polarization switch is demonstrated by using a dual-core photonic crystal fiber(DCPCF)with four symmetrical air holes, placed above and below each core, filled with magnetic fluid(MF). The switch, which utilizes a magnetic field to change the coupling length ratio of the x and y polarization modes, enables dynamic tuning of the polarization state and extinction ratio. Numerical results show that when the working length is 36.638 mm, the magneto–optical polarization switch can operate in four communication bands, i.e., 1509 nm to 1520 nm, 1544 nm to1556 nm, 1578 nm to 1591 nm, and 1611 nm to 1624 nm. Moreover, the extinction ratio(ER) is greater than 20 d B in the fiber length range of 38.5 mm to 38.7 mm, indicating that the device has a good fault tolerance for the interception of the fiber length.展开更多
A novel ultra-broadband polarization splitter based on a dual-core photonic crystal fiber(DC-PCF)is designed.The full-vector finite element method and coupled-mode theory are employed to investigate the characteristic...A novel ultra-broadband polarization splitter based on a dual-core photonic crystal fiber(DC-PCF)is designed.The full-vector finite element method and coupled-mode theory are employed to investigate the characteristics of the polarization splitter.According to the numerical results,a graphene-filled layer not only broadens the working bandwidth but also reduces the size of the polarization splitter.Furthermore,the fluorine-doped region and the germanium-doped region can broaden the bandwidth.Also,the 4.78 mm long polarization splitter can achieve an extinction ratio of-98.6 d B at a wavelength of 1550 nm.When extinction ratio is less than-20 d B,the range of the wavelength is 1027 nm-1723 nm with a bandwidth of 696 nm.Overall,the polarization splitter can be applied to all-optical network communication systems in the infrared and near-infrared wavelength range.展开更多
We design a novel kind of polarization beam splitter based on a gold-filled dual-core photonic crystal fiber （DC-PCF）. Owing to filling with two gold wires in this DC-PCF, its coupling characteristics can be changed...We design a novel kind of polarization beam splitter based on a gold-filled dual-core photonic crystal fiber （DC-PCF）. Owing to filling with two gold wires in this DC-PCF, its coupling characteristics can be changed greatly by the second-order surface plasmon polariton （SPP） and the resonant coupling between the surface plasmon modes and the fiber-core guided modes can enhance the directional power transfer in the two fiber-cores. Numerical results by using the finite element method show the extinction ratio at the wavethlengths of 1.327 μm and 1.55 μm can reach -58 dB and -60 dB and the bandwidths as the extinction ratio better than -12 dB are about 54 nm and 47 nm, respectively. Compared with the gold-unfilled DC-PCF, a 1.746-mm-long gold-filled DC-PCF is better applied to the polarization beam splitter in the two communication bands of λ = 1.327 μm and 1.55 μm.展开更多
Niobates are promising all-climate Li^(+)-storage anode material due to their fast charge transport,large specific capacities,and resistance to electrolyte reaction.However,their moderate unit-cellvolume expansion(gen...Niobates are promising all-climate Li^(+)-storage anode material due to their fast charge transport,large specific capacities,and resistance to electrolyte reaction.However,their moderate unit-cellvolume expansion(generally 5%–10%)during Li^(+)storage causes unsatisfactory long-term cyclability.Here,“zero-strain”NiNb_(2)O_(6) fibers are explored as a new anode material with comprehensively good electrochemical properties.During Li^(+)storage,the expansion of electrochemical inactive NiO_(6) octahedra almost fully offsets the shrinkage of active NbO_(6) octahedra through reversible O movement.Such superior volume-accommodation capability of the NiO_(6) layers guarantees the“zero-strain”behavior of NiNb_(2)O_(6) in a broad temperature range(0.53%//0.51%//0.74%at 25//−10//60℃),leading to the excellent cyclability of the NiNb_(2)O_(6) fibers(92.8%//99.2%//91.1%capacity retention after 1000//2000//1000 cycles at 10C and 25//−10//60℃).This NiNb_(2)O_(6) material further exhibits a large reversible capacity(300//184//318 mAh g−1 at 0.1C and 25//−10//60℃)and outstanding rate performance(10 to 0.5C capacity percentage of 64.3%//50.0%//65.4%at 25//−10//60℃).Therefore,the NiNb_(2)O_(6) fibers are especially suitable for large-capacity,fast-charging,long-life,and all-climate lithium-ion batteries.展开更多
This work introduces special states for light in multimode fibers featuring strongly enhanced or reduced correlations be-tween output fields in the presence of environmental temperature fluctuations.Using experimental...This work introduces special states for light in multimode fibers featuring strongly enhanced or reduced correlations be-tween output fields in the presence of environmental temperature fluctuations.Using experimentally measured multi-tem-perature transmission matrix,a set of temperature principal modes that exhibit resilience to disturbances caused by tem-perature fluctuations can be generated.Reversing this concept also allows the construction of temperature anti-principal modes,with output profiles more susceptible to temperature influences than the unmodulated wavefront.Despite changes in the length of the multimode fiber within the temperature-fluctuating region,the proposed approach remains capable of robustly controlling the temperature response within the fiber.To illustrate the practicality of the proposed spe-cial state,a learning-empowered fiber specklegram temperature sensor based on temperature anti-principal mode sensi-tization is proposed.This sensor exhibits outstanding superiority over traditional approaches in terms of resolution and accuracy.These novel states are anticipated to have wide-ranging applications in fiber communication,sensing,imaging,and spectroscopy,and serve as a source of inspiration for the discovery of other novel states.展开更多
Transition metal trichalcogenides(TMTs)are known for their two-dimensional(2D)characteristics and the presence of quasi one-dimensional chains.These materials are less vulnerable to edge defects,which makes them suita...Transition metal trichalcogenides(TMTs)are known for their two-dimensional(2D)characteristics and the presence of quasi one-dimensional chains.These materials are less vulnerable to edge defects,which makes them suitable for optical and electronic devices with low-dimensional structures.This study demonstrates the application of HfSe_(3) nanomaterial as an emerging ultrafast photonic device capable of producing mode-locked and Q-switched pulses in fiber lasers.The nonlinear optical absorption properties of a HfSe_(3)-based saturable absorber(SA)were analyzed,revealing a modulation depth of 7% and nonsaturable loss of 35%,respectively.In addition,first principles-based theoretical calculations were performed to explore the optoelectronic properties of bulk HfSe_(3).The integration of the HfSe_(3)-based SA into an Er-doped fiber laser cavity enabled both Q-switched and mode-locked pulse operations.For the mode-locked operation,the pulse duration was 560 fs,accompanied by a signal-to-noise ratio(SNR)of 71.43 dB.In the Q-switched regime,the narrowest pulse width recorded was 757.1 ns with an SNR of 75.45 dB.This study indicates that nanodevices based on 2D TMTs hold promise for efficient ultrafast photonic applications and can be extensively employed in nonlinear optical technologies.展开更多
This letter describes the implementation of a high-precision time and frequency transmission system using a two-way and wavelength division multiplexing scheme over 3,143.6 km of field fiber links,connecting 21 sites ...This letter describes the implementation of a high-precision time and frequency transmission system using a two-way and wavelength division multiplexing scheme over 3,143.6 km of field fiber links,connecting 21 sites between Xi’an and Beijing,China.This scheme incorporates a link noise clean-up system(LNCUS),wherein a controlled very-low-phase noise BVA oscillator acts as an internal frequency source at the relay site to effectively suppress the interference caused by the fiber link noise.Additionally,the high-stability pulse generation technology in the LNCPS provides sufficient short-term stability to significantly improve the stability of the fiber time transfer.The results indicate a time transfer stability in terms of time deviation(TDEV)of less than2.07 ps@1s,5.9 ps@100,000s,and combined uncertainty of less than 49.29 ps for the 3,143.6 km field fiber link.The results represent a significant breakthrough in achieving high-accuracy time transfer and continuous operation over ultralong-span field optical fibers exceeding 3,000 km for the first time.This enabled time transfer and synchronization services over the longest international optical fiber distance,thereby establishing a fundamental basis for constructing a nationwide high-precision time service through optical fiber networks.展开更多
In an era where technological advancement and sustainability converge,developing renewable materials with multifunctional integration is increasingly in demand.This study filled a crucial gap by integrating energy sto...In an era where technological advancement and sustainability converge,developing renewable materials with multifunctional integration is increasingly in demand.This study filled a crucial gap by integrating energy storage,multi-band electromagnetic interference(EMI)shielding,and structural design into bio-based materials.Specifically,conductive polymer layers were formed within the 2,2,6,6-tetramethylpiperidine-1-oxide(TEMPO)-oxidized cellulose fiber skeleton,where a mild TEMPO-mediated oxidation system was applied to endow it with abundant macropores that could be utilized as active sites(specific surface area of 105.6 m2 g-1).Benefiting from the special hierarchical porous structure of the material,the constructed cellulose fiber-derived composites can realize high areal-specific capacitance of 12.44 F cm^(-2)at 5 m A cm^(-2)and areal energy density of 3.99 m Wh cm^(-2)(2005 m W cm^(-2))with an excellent stability of maintaining 90.23%after 10,000 cycles at 50 m A cm^(-2).Meanwhile,the composites showed a high electrical conductivity of 877.19 S m-1 and excellent EMI efficiency(>99.99%)in multiple wavelength bands.The composite material’s EMI values exceed 100 d B across the L,S,C,and X bands,effectively shielding electromagnetic waves in daily life.The proposed strategy paves the way for utilizing bio-based materials in applications like energy storage and EMI shielding,contributing to a more sustainable future.展开更多
During the automated placement process of dry fibers,the positioning and fixation of dry fiber gauze belts are achieved by spraying setting agents.The amount of the setting agent is difficult to control when it is spr...During the automated placement process of dry fibers,the positioning and fixation of dry fiber gauze belts are achieved by spraying setting agents.The amount of the setting agent is difficult to control when it is sprayed manually.Furthermore,it can also affect the permeability of the preform,resin injection and the quality of the vacuum assisted resin infusion(VARI)molding,resulting in a decrease in the mechanical properties of composite materials.This study utilizes dry fiber automated placement equipment and an automated spraying system to manufacture preform structures,followed by VARI process to prepare composite samples with varying setting agent contents.Subsequently,mechanical characterization including interlaminar shear,bending and tensile testing is conducted to investigate the influence of setting agent content on both the manufacturing process and the mechanical properties of composite products.The results show that the interlaminar shear strength,bending strength and tensile strength of the sample gradually decrease with the increase of the content of the setting agent.The optimal setting agent content for automated laying of dry fiber is determined to be 4%-6%,balancing the preformed body’s layup quality and its impact on mechanical properties.Compared with agent-free samples,this range results in reductions of 3% in interlaminar shear strength,9% in bending strength,11% in bending modulus,and 13%-16% in tensile strength.展开更多
A polarization splitter based on dual-core soft glass photonic crystal fiber （PCF） filled with micron-scale gold wire is proposed. The characteristics of the polarization splitter are studied by changing the structu...A polarization splitter based on dual-core soft glass photonic crystal fiber （PCF） filled with micron-scale gold wire is proposed. The characteristics of the polarization splitter are studied by changing the structural parameters of the PCF and the diameter of the gold wire with the finite element method （FEM）. The simulation results reveal that the coupling length ratio of the soft glass-based PCF is close to 2 and the corresponding curve is more fiat than that of the silica-based PCE The broadband bandwidth is 226 nm in which the extinction ratio is lower than -20 dB by the soft glass-based PCE i.e., from 1465 nm to 1691 nm which is competitive in the reported polarization splitters, and the bandwidth is just 32 nm by the silica-based PCE The insertion loss by our polarization splitter is just 0.00248 dB and 0.43 dB at the wavelength of 1.47 μm and 1.55 μm. The birefringence is obviously increased and the coupling length is decreased by filling gold wire into the soft glass-based or the silica-based PCE Also the birefringence based on the silica-based PCF is much larger than that based on the soft glass-based PCF whether or not the gold wire is introduced. The fabrication tolerance of the polarization splitter is also considered by changing the structural parameters. The polarization splitter possesses broad bandwidth, low insertion loss, simple structure and high fabrication tolerance.展开更多
This paper theoretically investigates the dependence of leaky mode coupling between inner core fundamental mode and outer core defect mode on phase and loss matching in pure silica dual-core photonic crystal fibres wi...This paper theoretically investigates the dependence of leaky mode coupling between inner core fundamental mode and outer core defect mode on phase and loss matching in pure silica dual-core photonic crystal fibres with the multi-pole method. The complete mode coupling can take place when both the phase and loss matching conditions are satisfied at the avoided anti-crossing wavelength. It shows the influences of cladding structure parameters including the diameters of cladding air holes d1, diameters of outer core holes d2 and hole to hole pitch A on the characteristics of leaky modes coupling. The coupled-mode theory is used to analyse the mode transition characteristics and the complete coupling can be clearly indicated by comparing the real and imaginary parts of propagation constant of the leaky modes.展开更多
We demonstrate coherent optical frequency dissemination over a distance of 972 km by cascading two spans where the phase noise is passively compensated for.Instead of employing a phase discriminator and a phase lockin...We demonstrate coherent optical frequency dissemination over a distance of 972 km by cascading two spans where the phase noise is passively compensated for.Instead of employing a phase discriminator and a phase locking loop in the conventional active phase control scheme,the passive phase noise cancellation is realized by feeding double-trip beat-note frequency to the driver of the acoustic optical modulator at the local site.This passive scheme exhibits fine robustness and reliability,making it suitable for long-distance and noisy fiber links.An optical regeneration station is used in the link for signal amplification and cascaded transmission.The phase noise cancellation and transfer instability of the 972-km link is investigated,and transfer instability of 1.1×10^(-19)at 10^(4)s is achieved.This work provides a promising method for realizing optical frequency distribution over thousands of kilometers by using fiber links.展开更多
The engineering of plant-based precursor for nitrogen doping has become one of the most promising strategies to enhance rate capability of hard carbon materials for sodium-ion batteries;however,the poor rate performan...The engineering of plant-based precursor for nitrogen doping has become one of the most promising strategies to enhance rate capability of hard carbon materials for sodium-ion batteries;however,the poor rate performance is mainly caused by lack of pyridine nitrogen,which often tends to escape because of high temperature in preparation process of hard carbon.In this paper,a high-rate kapok fiber-derived hard carbon is fabricated by cross-linking carboxyl group in 2,6-pyridinedicarboxylic acid with the exposed hydroxyl group on alkalized kapok with assistance of zinc chloride.Specially,a high nitrogen doping content of 4.24%is achieved,most of which are pyridine nitrogen;this is crucial for improving the defect sites and electronic conductivity of hard carbon.The optimized carbon with feature of high nitrogen content,abundant functional groups,degree of disorder,and large layer spacing exhibits high capacity of 401.7 mAh g^(−1)at a current density of 0.05 A g^(−1),and more importantly,good rate performance,for example,even at the current density of 2 A g^(−1),a specific capacity of 159.5 mAh g^(−1)can be obtained.These findings make plant-based hard carbon a promising candidate for commercial application of sodium-ion batteries,achieving high-rate performance with the enhanced pre-cross-linking interaction between plant precursors and dopants to optimize aromatization process by auxiliary pyrolysis.展开更多
Hexagonal boron nitride nanosheets(BNNSs)exhibit remarkable thermal and dielectric properties.However,their self-assembly and alignment in macroscopic forms remain challenging due to the chemical inertness of boron ni...Hexagonal boron nitride nanosheets(BNNSs)exhibit remarkable thermal and dielectric properties.However,their self-assembly and alignment in macroscopic forms remain challenging due to the chemical inertness of boron nitride,thereby limiting their performance in applications such as thermal management.In this study,we present a coaxial wet spinning approach for the fabrication of BNNSs/polymer composite fibers with high nanosheet orientation.The composite fibers were prepared using a superacid-based solvent system and showed a layered structure comprising an aramid core and an aramid/BNNSs sheath.Notably,the coaxial fibers exhibited significantly higher BNNSs alignment compared to uniaxial aramid/BNNSs fibers,primarily due to the additional compressive forces exerted at the core-sheath interface during the hot drawing process.With a BNNSs loading of 60 wt%,the resulting coaxial fibers showed exceptional properties,including an ultrahigh Herman orientation parameter of 0.81,thermal conductivity of 17.2 W m^(-1)K^(-1),and tensile strength of 192.5 MPa.These results surpassed those of uniaxial fibers and previously reported BNNSs composite fibers,making them highly suitable for applications such as wearable thermal management textiles.Our findings present a promising strategy for fabricating high-performance composite fibers based on BNNSs.展开更多
Optical endoscopy has become an essential diagnostic and therapeutic approach in modern biomedicine for directly observing organs and tissues deep inside the human body,enabling non-invasive,rapid diagnosis and treatm...Optical endoscopy has become an essential diagnostic and therapeutic approach in modern biomedicine for directly observing organs and tissues deep inside the human body,enabling non-invasive,rapid diagnosis and treatment.Optical fiber endoscopy is highly competitive among various endoscopic imaging techniques due to its high flexibility,compact structure,excellent resolution,and resistance to electromagnetic interference.Over the past decade,endoscopes based on a single multimode optical fiber(MMF)have attracted widespread research interest due to their potential to significantly reduce the footprint of optical fiber endoscopes and enhance imaging capabilities.In comparison with other imaging principles of MMF endoscopes,the scanning imaging method based on the wavefront shaping technique is highly developed and provides benefits including excellent imaging contrast,broad applicability to complex imaging scenarios,and good compatibility with various well-established scanning imaging modalities.In this review,various technical routes to achieve light focusing through MMF and procedures to conduct the scanning imaging of MMF endoscopes are introduced.The advancements in imaging performance enhancements,integrations of various imaging modalities with MMF scanning endoscopes,and applications are summarized.Challenges specific to this endoscopic imaging technology are analyzed,and potential remedies and avenues for future developments are discussed.展开更多
Weakly-coupled mode division multiplexing(MDM)technique is considered a promising candidate to enhance the capacity of an optical transmission system,in which mode multiplexers/demultiplexers(MMUX/MDEMUX)with low inse...Weakly-coupled mode division multiplexing(MDM)technique is considered a promising candidate to enhance the capacity of an optical transmission system,in which mode multiplexers/demultiplexers(MMUX/MDEMUX)with low insertion loss and modal crosstalk are the key components.In this paper,a low-modal-crosstalk 4-mode MMUX/MDEMUX for the weakly-coupled triple-ring-core few-mode fiber(TRC-FMF)is designed and fabricated with side-polishing processing.The measurement results show that a pair of MMUX/MDEMUX and 25 km weakly-coupled TRC-FMF MDM link achieve low modal crosstalk of lower than−17.5 dB and insertion loss of lower than 11.56 dB for all the four modes.Based on the TRC-FMF and all-fiber MMUX/MDEMUX,an experiment for 25 km real-time 4-mode 3-λwavelength division multiplexing(WDM)-MDM transmission is conducted using commercial 400G optical transport network(OTN)transceivers.The experimental results prove weakly-coupled MDM techniques facilitate a smooth upgrade of the optical transmission system.展开更多
A wavelength-interval switchable Brillouin–Raman random fiber laser(BRRFL) based on Brillouin pump(BP) manipulation is proposed in this paper. The proposed wavelength-interval switchable BRRFL has a full-open cavity ...A wavelength-interval switchable Brillouin–Raman random fiber laser(BRRFL) based on Brillouin pump(BP) manipulation is proposed in this paper. The proposed wavelength-interval switchable BRRFL has a full-open cavity configuration, featuring multiwavelength output with wavelength interval of double Brillouin frequency shifts. Through simultaneously injecting the BP light and its first-order stimulated Brillouin-scattered light into the cavity, the laser output exhibits a wavelength interval of single Brillouin frequency shift. The wavelength-interval switching effect can be manipulated by controlling the power of the first-order stimulated Brillouin scattering light. The experimental results show the multiwavelength output can be switched between double Brillouin frequency shift multiwavelength emission with a broad bandwidth of approximately 60 nm and single Brillouin frequency shift multiwavelength emission of 44 nm. The flexible optically controlled random fiber laser with switchable wavelength interval makes it useful for a wide range of applications and holds significant potential in the field of wavelength-division multiplexing optical communication.展开更多
基金Project supported by the National Natural Science Foundation of China (Grant No. 10874145)the Specialized Research Fund for the Doctoral Program of Higher Education of China (Grant No. 20091333110010)+1 种基金the Natural Science Foundation of Hebei Province, China (Grant No. F2009000481)the China Postdoctoral Science Foundation (Grant Nos. 20080440014 and 200902046)
文摘A type of As2S3 chalcogenide glass mid-infrared dual-core photonic crystal fiber has been proposed. The dualcore photonic crystal fiber （PCF） consists of two asymmetric cores. The high polarization property and the coupling characteristics have been studied by using the finite dement method and mode coupling theory. Numerical results show that the birefringence at wavelength λ = 10 μm is up to 0.01386 and the coupling length can reach wavelength = 5 μm, 261 μm and 271.44 μm for x-polarized mode and y-polarized mode, respectively. It demonstrates that a 6.786-ram-long fiber can exhibit an extinction ratio of better than -10 dB and a bandwidth of 180 nm.
基金Project supported by the National Natural Science Foundation of China(Grant No.61178026)the Natural Science Foundation of Hebei Province,China(Grant No.E2012203035)
文摘We have proposed a novel kind of photonic crystal fiber which contains two asymmetric cores. The bireti＇ingence and the dispersion are numerically analyzed based on finite element method when the size of the air holes and the pitch of two adjacent air holes are changed. It is shown that the proposed photonic crystal fiber has high birefringence up to the order of 10-2 and double-zero dispersion points are at the wavelengths of 1310 nm and 800 rim, simultaneously. At the same time, the normalized power and the extinction ratios of the proposed photonic crystal fiber have been simulated. It is demonstrated that, at the wavelength of 1310 rim, the x-polarized mode and the y-polarized mode are separated when the propagation distance is 2.481 ram.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61405096 and 61504058)the Introduction of Talent Research and Research Fund of Nanjing University of Posts and Telecommunications,China(Grant No.NY214158)+1 种基金the Open Fund of Laboratory of Solid State Microstructures,Nanjing University,China(Grant No.M28035)the Open Fund of State Key Laboratory of Transient Optics and Photonics,Chinese Academy of Sciences(Grant No.SKLST201404)
文摘An ultra-broadband polarization splitter based on graphene layer-filled dual-core photonic crystal fiber （GDC-PCF） that can work in a wavelength range from 1120 nm to 1730 nm is proposed in this paper. Through optimizing fiber configuration, the polarization splitter has an extinction ratio of-56.3 dB at 1.55 μm with a fiber length of 4.8 mm. Compared with the photonic crystal fiber reported splitters, to our knowledge, the GDC-PCF splitter with the extinction ratio below-20 dB has a super wide bandwidth of 610 nm. Due to the excellent splitting characteristics, the GDC-PCF will be used in coherent optical communication systems in a wavelength range from infrared to mid-infraed.
基金supported by the National Key Research and Development Program of China “National Quality Infrastructure” (Grant No. 2021YFF0600902)。
文摘The research of high-performance polarization controllers is of great significance for expanding the application field of polarization optics. Here, a polarization switch is demonstrated by using a dual-core photonic crystal fiber(DCPCF)with four symmetrical air holes, placed above and below each core, filled with magnetic fluid(MF). The switch, which utilizes a magnetic field to change the coupling length ratio of the x and y polarization modes, enables dynamic tuning of the polarization state and extinction ratio. Numerical results show that when the working length is 36.638 mm, the magneto–optical polarization switch can operate in four communication bands, i.e., 1509 nm to 1520 nm, 1544 nm to1556 nm, 1578 nm to 1591 nm, and 1611 nm to 1624 nm. Moreover, the extinction ratio(ER) is greater than 20 d B in the fiber length range of 38.5 mm to 38.7 mm, indicating that the device has a good fault tolerance for the interception of the fiber length.
基金Project supported by the State Key Laboratory of Luminescence and Applications(Grant No.SKLA-2020-01)。
文摘A novel ultra-broadband polarization splitter based on a dual-core photonic crystal fiber(DC-PCF)is designed.The full-vector finite element method and coupled-mode theory are employed to investigate the characteristics of the polarization splitter.According to the numerical results,a graphene-filled layer not only broadens the working bandwidth but also reduces the size of the polarization splitter.Furthermore,the fluorine-doped region and the germanium-doped region can broaden the bandwidth.Also,the 4.78 mm long polarization splitter can achieve an extinction ratio of-98.6 d B at a wavelength of 1550 nm.When extinction ratio is less than-20 d B,the range of the wavelength is 1027 nm-1723 nm with a bandwidth of 696 nm.Overall,the polarization splitter can be applied to all-optical network communication systems in the infrared and near-infrared wavelength range.
基金supported by the National Natural Science Foundation of China(Grant Nos.61178026)the Natural Science Foundation of Hebei Province,China(Grant No.E2012203035)
文摘We design a novel kind of polarization beam splitter based on a gold-filled dual-core photonic crystal fiber （DC-PCF）. Owing to filling with two gold wires in this DC-PCF, its coupling characteristics can be changed greatly by the second-order surface plasmon polariton （SPP） and the resonant coupling between the surface plasmon modes and the fiber-core guided modes can enhance the directional power transfer in the two fiber-cores. Numerical results by using the finite element method show the extinction ratio at the wavethlengths of 1.327 μm and 1.55 μm can reach -58 dB and -60 dB and the bandwidths as the extinction ratio better than -12 dB are about 54 nm and 47 nm, respectively. Compared with the gold-unfilled DC-PCF, a 1.746-mm-long gold-filled DC-PCF is better applied to the polarization beam splitter in the two communication bands of λ = 1.327 μm and 1.55 μm.
基金supported by the National Natural Science Foundation of China(51762014,52231007,12327804,T2321003,22088101)in part by the National Key Research Program of China under Grant 2021YFA1200600.
文摘Niobates are promising all-climate Li^(+)-storage anode material due to their fast charge transport,large specific capacities,and resistance to electrolyte reaction.However,their moderate unit-cellvolume expansion(generally 5%–10%)during Li^(+)storage causes unsatisfactory long-term cyclability.Here,“zero-strain”NiNb_(2)O_(6) fibers are explored as a new anode material with comprehensively good electrochemical properties.During Li^(+)storage,the expansion of electrochemical inactive NiO_(6) octahedra almost fully offsets the shrinkage of active NbO_(6) octahedra through reversible O movement.Such superior volume-accommodation capability of the NiO_(6) layers guarantees the“zero-strain”behavior of NiNb_(2)O_(6) in a broad temperature range(0.53%//0.51%//0.74%at 25//−10//60℃),leading to the excellent cyclability of the NiNb_(2)O_(6) fibers(92.8%//99.2%//91.1%capacity retention after 1000//2000//1000 cycles at 10C and 25//−10//60℃).This NiNb_(2)O_(6) material further exhibits a large reversible capacity(300//184//318 mAh g−1 at 0.1C and 25//−10//60℃)and outstanding rate performance(10 to 0.5C capacity percentage of 64.3%//50.0%//65.4%at 25//−10//60℃).Therefore,the NiNb_(2)O_(6) fibers are especially suitable for large-capacity,fast-charging,long-life,and all-climate lithium-ion batteries.
基金financial supports from the National Natural Science Foundation of China (62075132 and 92050202)Natural Science Foundation of Shanghai (22ZR1443100)
文摘This work introduces special states for light in multimode fibers featuring strongly enhanced or reduced correlations be-tween output fields in the presence of environmental temperature fluctuations.Using experimentally measured multi-tem-perature transmission matrix,a set of temperature principal modes that exhibit resilience to disturbances caused by tem-perature fluctuations can be generated.Reversing this concept also allows the construction of temperature anti-principal modes,with output profiles more susceptible to temperature influences than the unmodulated wavefront.Despite changes in the length of the multimode fiber within the temperature-fluctuating region,the proposed approach remains capable of robustly controlling the temperature response within the fiber.To illustrate the practicality of the proposed spe-cial state,a learning-empowered fiber specklegram temperature sensor based on temperature anti-principal mode sensi-tization is proposed.This sensor exhibits outstanding superiority over traditional approaches in terms of resolution and accuracy.These novel states are anticipated to have wide-ranging applications in fiber communication,sensing,imaging,and spectroscopy,and serve as a source of inspiration for the discovery of other novel states.
文摘Transition metal trichalcogenides(TMTs)are known for their two-dimensional(2D)characteristics and the presence of quasi one-dimensional chains.These materials are less vulnerable to edge defects,which makes them suitable for optical and electronic devices with low-dimensional structures.This study demonstrates the application of HfSe_(3) nanomaterial as an emerging ultrafast photonic device capable of producing mode-locked and Q-switched pulses in fiber lasers.The nonlinear optical absorption properties of a HfSe_(3)-based saturable absorber(SA)were analyzed,revealing a modulation depth of 7% and nonsaturable loss of 35%,respectively.In addition,first principles-based theoretical calculations were performed to explore the optoelectronic properties of bulk HfSe_(3).The integration of the HfSe_(3)-based SA into an Er-doped fiber laser cavity enabled both Q-switched and mode-locked pulse operations.For the mode-locked operation,the pulse duration was 560 fs,accompanied by a signal-to-noise ratio(SNR)of 71.43 dB.In the Q-switched regime,the narrowest pulse width recorded was 757.1 ns with an SNR of 75.45 dB.This study indicates that nanodevices based on 2D TMTs hold promise for efficient ultrafast photonic applications and can be extensively employed in nonlinear optical technologies.
文摘This letter describes the implementation of a high-precision time and frequency transmission system using a two-way and wavelength division multiplexing scheme over 3,143.6 km of field fiber links,connecting 21 sites between Xi’an and Beijing,China.This scheme incorporates a link noise clean-up system(LNCUS),wherein a controlled very-low-phase noise BVA oscillator acts as an internal frequency source at the relay site to effectively suppress the interference caused by the fiber link noise.Additionally,the high-stability pulse generation technology in the LNCPS provides sufficient short-term stability to significantly improve the stability of the fiber time transfer.The results indicate a time transfer stability in terms of time deviation(TDEV)of less than2.07 ps@1s,5.9 ps@100,000s,and combined uncertainty of less than 49.29 ps for the 3,143.6 km field fiber link.The results represent a significant breakthrough in achieving high-accuracy time transfer and continuous operation over ultralong-span field optical fibers exceeding 3,000 km for the first time.This enabled time transfer and synchronization services over the longest international optical fiber distance,thereby establishing a fundamental basis for constructing a nationwide high-precision time service through optical fiber networks.
基金the financial support of a special fund from the Beijing Key Laboratory of Lignocellulosic Chemistry,College of Materials Science and Technology,Beijing Forestry UniversityFinancial support from NSERC Discovery grant(RGPIN-2017-06737)+1 种基金Canada Research Chair program is also acknowledgedthe China Scholarship Council(CSC)for its financial support(CSC No.202306510047)。
文摘In an era where technological advancement and sustainability converge,developing renewable materials with multifunctional integration is increasingly in demand.This study filled a crucial gap by integrating energy storage,multi-band electromagnetic interference(EMI)shielding,and structural design into bio-based materials.Specifically,conductive polymer layers were formed within the 2,2,6,6-tetramethylpiperidine-1-oxide(TEMPO)-oxidized cellulose fiber skeleton,where a mild TEMPO-mediated oxidation system was applied to endow it with abundant macropores that could be utilized as active sites(specific surface area of 105.6 m2 g-1).Benefiting from the special hierarchical porous structure of the material,the constructed cellulose fiber-derived composites can realize high areal-specific capacitance of 12.44 F cm^(-2)at 5 m A cm^(-2)and areal energy density of 3.99 m Wh cm^(-2)(2005 m W cm^(-2))with an excellent stability of maintaining 90.23%after 10,000 cycles at 50 m A cm^(-2).Meanwhile,the composites showed a high electrical conductivity of 877.19 S m-1 and excellent EMI efficiency(>99.99%)in multiple wavelength bands.The composite material’s EMI values exceed 100 d B across the L,S,C,and X bands,effectively shielding electromagnetic waves in daily life.The proposed strategy paves the way for utilizing bio-based materials in applications like energy storage and EMI shielding,contributing to a more sustainable future.
基金supported by Jiangsu Provincial Key Research and Development Program(No.BE2023014-4).
文摘During the automated placement process of dry fibers,the positioning and fixation of dry fiber gauze belts are achieved by spraying setting agents.The amount of the setting agent is difficult to control when it is sprayed manually.Furthermore,it can also affect the permeability of the preform,resin injection and the quality of the vacuum assisted resin infusion(VARI)molding,resulting in a decrease in the mechanical properties of composite materials.This study utilizes dry fiber automated placement equipment and an automated spraying system to manufacture preform structures,followed by VARI process to prepare composite samples with varying setting agent contents.Subsequently,mechanical characterization including interlaminar shear,bending and tensile testing is conducted to investigate the influence of setting agent content on both the manufacturing process and the mechanical properties of composite products.The results show that the interlaminar shear strength,bending strength and tensile strength of the sample gradually decrease with the increase of the content of the setting agent.The optimal setting agent content for automated laying of dry fiber is determined to be 4%-6%,balancing the preformed body’s layup quality and its impact on mechanical properties.Compared with agent-free samples,this range results in reductions of 3% in interlaminar shear strength,9% in bending strength,11% in bending modulus,and 13%-16% in tensile strength.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61178026,61475134,and 61505175)
文摘A polarization splitter based on dual-core soft glass photonic crystal fiber （PCF） filled with micron-scale gold wire is proposed. The characteristics of the polarization splitter are studied by changing the structural parameters of the PCF and the diameter of the gold wire with the finite element method （FEM）. The simulation results reveal that the coupling length ratio of the soft glass-based PCF is close to 2 and the corresponding curve is more fiat than that of the silica-based PCE The broadband bandwidth is 226 nm in which the extinction ratio is lower than -20 dB by the soft glass-based PCE i.e., from 1465 nm to 1691 nm which is competitive in the reported polarization splitters, and the bandwidth is just 32 nm by the silica-based PCE The insertion loss by our polarization splitter is just 0.00248 dB and 0.43 dB at the wavelength of 1.47 μm and 1.55 μm. The birefringence is obviously increased and the coupling length is decreased by filling gold wire into the soft glass-based or the silica-based PCE Also the birefringence based on the silica-based PCF is much larger than that based on the soft glass-based PCF whether or not the gold wire is introduced. The fabrication tolerance of the polarization splitter is also considered by changing the structural parameters. The polarization splitter possesses broad bandwidth, low insertion loss, simple structure and high fabrication tolerance.
基金Project supported by the National Key Basic Research Special Foundation of China (Grant No. 2010CB327605)the National High-Technology Research and Development Program of China (Grant No. 2009AA01Z220)+2 种基金the Key Grant of the Chinese Ministry of Education (Grant No. 109015)the Discipline Co-construction Project of Beijing Municipal Commission of Education (Grant No. YB20081001301)the Open Fund of Key Laboratory of Information Photonics and Optical Communications (Beijing University of Posts and Telecommunications), Ministry of Education,and the Specialized Research Fund for the Doctoral Program of Beijing University of Posts and Telecommunications (Grant No. CX201023)
文摘This paper theoretically investigates the dependence of leaky mode coupling between inner core fundamental mode and outer core defect mode on phase and loss matching in pure silica dual-core photonic crystal fibres with the multi-pole method. The complete mode coupling can take place when both the phase and loss matching conditions are satisfied at the avoided anti-crossing wavelength. It shows the influences of cladding structure parameters including the diameters of cladding air holes d1, diameters of outer core holes d2 and hole to hole pitch A on the characteristics of leaky modes coupling. The coupled-mode theory is used to analyse the mode transition characteristics and the complete coupling can be clearly indicated by comparing the real and imaginary parts of propagation constant of the leaky modes.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.12103059,12033007,12303077,and 12303076)the Fund from the Xi’an Science and Technology Bureau,China(Grant No.E019XK1S04)the Fund from the Youth Innovation Promotion Association of the Chinese Academy of Sciences(Grant No.1188000XGJ).
文摘We demonstrate coherent optical frequency dissemination over a distance of 972 km by cascading two spans where the phase noise is passively compensated for.Instead of employing a phase discriminator and a phase locking loop in the conventional active phase control scheme,the passive phase noise cancellation is realized by feeding double-trip beat-note frequency to the driver of the acoustic optical modulator at the local site.This passive scheme exhibits fine robustness and reliability,making it suitable for long-distance and noisy fiber links.An optical regeneration station is used in the link for signal amplification and cascaded transmission.The phase noise cancellation and transfer instability of the 972-km link is investigated,and transfer instability of 1.1×10^(-19)at 10^(4)s is achieved.This work provides a promising method for realizing optical frequency distribution over thousands of kilometers by using fiber links.
基金supported by National Natural Science Foundation of China(51903113 and 52073133)China Postdoctoral Science Foundation(2022T150282)+1 种基金Lanzhou Young Science and Technology Talent Innovation Project(2023-QN-101the Program for Hongliu Excellent and Distinguished Young Scholars at Lanzhou University of Technology.
文摘The engineering of plant-based precursor for nitrogen doping has become one of the most promising strategies to enhance rate capability of hard carbon materials for sodium-ion batteries;however,the poor rate performance is mainly caused by lack of pyridine nitrogen,which often tends to escape because of high temperature in preparation process of hard carbon.In this paper,a high-rate kapok fiber-derived hard carbon is fabricated by cross-linking carboxyl group in 2,6-pyridinedicarboxylic acid with the exposed hydroxyl group on alkalized kapok with assistance of zinc chloride.Specially,a high nitrogen doping content of 4.24%is achieved,most of which are pyridine nitrogen;this is crucial for improving the defect sites and electronic conductivity of hard carbon.The optimized carbon with feature of high nitrogen content,abundant functional groups,degree of disorder,and large layer spacing exhibits high capacity of 401.7 mAh g^(−1)at a current density of 0.05 A g^(−1),and more importantly,good rate performance,for example,even at the current density of 2 A g^(−1),a specific capacity of 159.5 mAh g^(−1)can be obtained.These findings make plant-based hard carbon a promising candidate for commercial application of sodium-ion batteries,achieving high-rate performance with the enhanced pre-cross-linking interaction between plant precursors and dopants to optimize aromatization process by auxiliary pyrolysis.
基金This work was supported by the National Key Research and Development Project(Nos.2019YFA0705403,2022YFA1205300)the National Natural Science Foundation of China(No.T2293693)+3 种基金the Guangdong Innovative and Entrepreneurial Research Team Program(No.2017ZT07C341)the Guangdong Basic and Applied Basic Research Foundation(No.2020B0301030002)the Shenzhen Basic Research Project(Nos.WDZC20200824091903001,JSGG20220831105402004)Zhiyuan Xiong thanks the financial support from South China University of Technology.
文摘Hexagonal boron nitride nanosheets(BNNSs)exhibit remarkable thermal and dielectric properties.However,their self-assembly and alignment in macroscopic forms remain challenging due to the chemical inertness of boron nitride,thereby limiting their performance in applications such as thermal management.In this study,we present a coaxial wet spinning approach for the fabrication of BNNSs/polymer composite fibers with high nanosheet orientation.The composite fibers were prepared using a superacid-based solvent system and showed a layered structure comprising an aramid core and an aramid/BNNSs sheath.Notably,the coaxial fibers exhibited significantly higher BNNSs alignment compared to uniaxial aramid/BNNSs fibers,primarily due to the additional compressive forces exerted at the core-sheath interface during the hot drawing process.With a BNNSs loading of 60 wt%,the resulting coaxial fibers showed exceptional properties,including an ultrahigh Herman orientation parameter of 0.81,thermal conductivity of 17.2 W m^(-1)K^(-1),and tensile strength of 192.5 MPa.These results surpassed those of uniaxial fibers and previously reported BNNSs composite fibers,making them highly suitable for applications such as wearable thermal management textiles.Our findings present a promising strategy for fabricating high-performance composite fibers based on BNNSs.
基金supported by National Natural Science Foundation of China(62135007 and 61925502).
文摘Optical endoscopy has become an essential diagnostic and therapeutic approach in modern biomedicine for directly observing organs and tissues deep inside the human body,enabling non-invasive,rapid diagnosis and treatment.Optical fiber endoscopy is highly competitive among various endoscopic imaging techniques due to its high flexibility,compact structure,excellent resolution,and resistance to electromagnetic interference.Over the past decade,endoscopes based on a single multimode optical fiber(MMF)have attracted widespread research interest due to their potential to significantly reduce the footprint of optical fiber endoscopes and enhance imaging capabilities.In comparison with other imaging principles of MMF endoscopes,the scanning imaging method based on the wavefront shaping technique is highly developed and provides benefits including excellent imaging contrast,broad applicability to complex imaging scenarios,and good compatibility with various well-established scanning imaging modalities.In this review,various technical routes to achieve light focusing through MMF and procedures to conduct the scanning imaging of MMF endoscopes are introduced.The advancements in imaging performance enhancements,integrations of various imaging modalities with MMF scanning endoscopes,and applications are summarized.Challenges specific to this endoscopic imaging technology are analyzed,and potential remedies and avenues for future developments are discussed.
基金supported in part by the ZTE Industry-University-Institute Cooperation Funds.
文摘Weakly-coupled mode division multiplexing(MDM)technique is considered a promising candidate to enhance the capacity of an optical transmission system,in which mode multiplexers/demultiplexers(MMUX/MDEMUX)with low insertion loss and modal crosstalk are the key components.In this paper,a low-modal-crosstalk 4-mode MMUX/MDEMUX for the weakly-coupled triple-ring-core few-mode fiber(TRC-FMF)is designed and fabricated with side-polishing processing.The measurement results show that a pair of MMUX/MDEMUX and 25 km weakly-coupled TRC-FMF MDM link achieve low modal crosstalk of lower than−17.5 dB and insertion loss of lower than 11.56 dB for all the four modes.Based on the TRC-FMF and all-fiber MMUX/MDEMUX,an experiment for 25 km real-time 4-mode 3-λwavelength division multiplexing(WDM)-MDM transmission is conducted using commercial 400G optical transport network(OTN)transceivers.The experimental results prove weakly-coupled MDM techniques facilitate a smooth upgrade of the optical transmission system.
基金Poject supported by the National Natural Science Foundation of China(Grant Nos.62175116 and 62311530343)the Postgraduate Research Innovation Program of Jiangsu Province,China(Grant No.KYCX22_0913)。
文摘A wavelength-interval switchable Brillouin–Raman random fiber laser(BRRFL) based on Brillouin pump(BP) manipulation is proposed in this paper. The proposed wavelength-interval switchable BRRFL has a full-open cavity configuration, featuring multiwavelength output with wavelength interval of double Brillouin frequency shifts. Through simultaneously injecting the BP light and its first-order stimulated Brillouin-scattered light into the cavity, the laser output exhibits a wavelength interval of single Brillouin frequency shift. The wavelength-interval switching effect can be manipulated by controlling the power of the first-order stimulated Brillouin scattering light. The experimental results show the multiwavelength output can be switched between double Brillouin frequency shift multiwavelength emission with a broad bandwidth of approximately 60 nm and single Brillouin frequency shift multiwavelength emission of 44 nm. The flexible optically controlled random fiber laser with switchable wavelength interval makes it useful for a wide range of applications and holds significant potential in the field of wavelength-division multiplexing optical communication.
