期刊文献+
共找到159篇文章
< 1 2 8 >
每页显示 20 50 100
基于Division Mockup的卫星虚拟装配系统研究与开发 被引量:7
1
作者 夏平均 姚英学 +1 位作者 孙刚 易旺民 《中国机械工程》 EI CAS CSCD 北大核心 2008年第19期2340-2343,共4页
以虚拟装配软件Division Mockup为平台,提出了卫星虚拟装配系统的体系结构,并在Division Mockup软件下完成了卫星产品的装配过程规划。针对Division Mockup只偏重于装配过程图形仿真的特点,开发了后端的卫星装配工艺生成系统,并通过数... 以虚拟装配软件Division Mockup为平台,提出了卫星虚拟装配系统的体系结构,并在Division Mockup软件下完成了卫星产品的装配过程规划。针对Division Mockup只偏重于装配过程图形仿真的特点,开发了后端的卫星装配工艺生成系统,并通过数据接口实现了和Division Mockup的集成,从而完成工序工步规划、工艺文档生成、装配现场示教等功能。最后给出了系统的应用实例。 展开更多
关键词 虚拟装配 工艺规划 division MOCKUP 卫星
在线阅读 下载PDF
基于Division Mockup装配仿真的实现方法 被引量:6
2
作者 邵晓东 聂力 《机械设计与制造》 北大核心 2007年第3期54-56,共3页
虚拟装配技术是CAD领域研究的关键技术之一。随着计算机软硬件技术的发展,虚拟装配在个人计算机上也能够实现。本文以大型面天线为例,介绍了在Division Mockup的软件环境下进行虚拟装配,并进行相应的干涉检验,截面分析等。
关键词 虚拟装配 division MOCKUP 干涉检验 模型转换
在线阅读 下载PDF
基于Division Mockup的分油机虚拟装配系统的研究 被引量:1
3
作者 原彬 路慧彪 邹玉堂 《现代制造工程》 CSCD 北大核心 2013年第1期25-27,58,共4页
以Division Mockup软件为平台,进行了船用分油机的虚拟装配过程仿真。给出了虚拟装配系统的体系结构,介绍了不同CAD系统与Division Mockup软件之间的格式转换、交互式装配过程的进行,以及工艺文档生成等关键技术的研究。最终形成可进行... 以Division Mockup软件为平台,进行了船用分油机的虚拟装配过程仿真。给出了虚拟装配系统的体系结构,介绍了不同CAD系统与Division Mockup软件之间的格式转换、交互式装配过程的进行,以及工艺文档生成等关键技术的研究。最终形成可进行装配验证和示教功能的分油机系统。 展开更多
关键词 虚拟装配 division Mockup软件 分油机
在线阅读 下载PDF
基于Division的军事电子装备虚拟现实技术 被引量:3
4
作者 王璐 《合肥工业大学学报(自然科学版)》 CAS CSCD 北大核心 2006年第2期186-188,225,共4页
文章论述了虚拟现实技术在电子装备研制中的应用。首先介绍了VR的基本概念、国外的应用情况和软件Division的功能与模块;着重论述了在Division环境下开展电子装备研制的实现过程以及在雷达整机研制中VR的应用实践;总结了阶段性成果和下... 文章论述了虚拟现实技术在电子装备研制中的应用。首先介绍了VR的基本概念、国外的应用情况和软件Division的功能与模块;着重论述了在Division环境下开展电子装备研制的实现过程以及在雷达整机研制中VR的应用实践;总结了阶段性成果和下一阶段工作重点。 展开更多
关键词 虚拟现实 电子装备 division
在线阅读 下载PDF
Analysis and Simulation for Capacity of Time Division-Synchronous Code Division Multiple Access System 被引量:1
5
作者 Sun Chengjun, Zhang Zhongzhao, Ba Yong2 & Cao Pengzhi (Communication Research ("enter, Harbin Institute of Technology, Harbin 150001, P. R. China Department of Electronic Engineering, Tsinghua University, Beijing 100084, P. R. China Research and Development Division, Shanghai Bell Company Limited, Shanghai 200092, P. R. China) 《Journal of Systems Engineering and Electronics》 SCIE EI CSCD 2002年第4期91-97,共7页
Capcity both in uplink and downlink of TD-SCDMA (time division-synchronous code division multiple access) system is studied in a multi-cell environment. The theoretical expressions of the mean of intercell interferenc... Capcity both in uplink and downlink of TD-SCDMA (time division-synchronous code division multiple access) system is studied in a multi-cell environment. The theoretical expressions of the mean of intercell interference in uplink and the mean of sum of power allocation in downlink are given, by which uplink and downlink capacity is analyzed. Furthermore, we give the simulation models for both uplink and downlink capacity. The results from theoretical analysis and simulation fit very well. In the end, the maximum number of users that TD-SCDMA system can serve for 12.2 k speech service is given. 展开更多
关键词 Code division multiple access PROBABILITY Resource allocation SIMULATION Time division multiple access
在线阅读 下载PDF
A blockchain bee colony double inhibition labor division algorithm for spatio-temporal coupling task with application to UAV swarm task allocation 被引量:8
6
作者 WU Husheng LI Hao XIAO Renbin 《Journal of Systems Engineering and Electronics》 SCIE EI CSCD 2021年第5期1180-1199,共20页
It is difficult for the double suppression division algorithm of bee colony to solve the spatio-temporal coupling or have higher dimensional attributes and undertake sudden tasks.Using the idea of clustering,after clu... It is difficult for the double suppression division algorithm of bee colony to solve the spatio-temporal coupling or have higher dimensional attributes and undertake sudden tasks.Using the idea of clustering,after clustering tasks according to spatio-temporal attributes,the clustered groups are linked into task sub-chains according to similarity.Then,based on the correlation between clusters,the child chains are connected to form a task chain.Therefore,the limitation is solved that the task chain in the bee colony algorithm can only be connected according to one dimension.When a sudden task occurs,a method of inserting a small number of tasks into the original task chain and a task chain reconstruction method are designed according to the relative relationship between the number of sudden tasks and the number of remaining tasks.Through the above improvements,the algorithm can be used to process tasks with spatio-temporal coupling and burst tasks.In order to reflect the efficiency and applicability of the algorithm,a task allocation model for the unmanned aerial vehicle(UAV)group is constructed,and a one-to-one correspondence between the improved bee colony double suppression division algorithm and each attribute in the UAV group is proposed.Task assignment has been constructed.The study uses the self-adjusting characteristics of the bee colony to achieve task allocation.Simulation verification and algorithm comparison show that the algorithm has stronger planning advantages and algorithm performance. 展开更多
关键词 bee colony double inhibition labor division algorithm high dimensional attribute sudden task reforming the task chain task allocation model
在线阅读 下载PDF
Method and Practice on Water Function Division of the Yangtze River Region 被引量:1
7
作者 YUAN Hong-renProfessor-senior Engineer, Yangtze Valley Water Resources Protection Bureau, Wuhan 430051, China LUO Xiao-yongSenior Engineer, Yangtze Valley Water Resources Protection Bureau, Wuhan 430051, China 《人民长江》 北大核心 2002年第S1期54-57,共4页
Water function classification is to divide the waters in a basin or a region into different water function regions according to the natural features such as water resources condition, physical geographical location, e... Water function classification is to divide the waters in a basin or a region into different water function regions according to the natural features such as water resources condition, physical geographical location, environmental condition, etc. and social features such as the status quo of development and utilization, the requirement of social and economic development on water quantity and quality etc. Water function division has not ever been carried out in China and no ready-made theory and method can be complied with, in the meantime, it is a fundamental work with strong practical function. Therefore, the basic concept and theory foundation and research method are put forward on the base of summary of water resources management and developed and will be perfected in practice process of water function division. The Yangtze function zone covers the Yangtze river basin, the Lancang river basin and the rivers in the western area of the Lancang river in Southwest China. According to the technical outline of national water function division and combined with division practice of the Yangtze function zone, this paper presents the scope determination, procedure and method of water function division. 展开更多
关键词 WATER FUNCTION division procedure METHOD scope YANGTZE river
在线阅读 下载PDF
Reservation-based dynamic admission control scheme for wideband code division multiple access systems
8
作者 A.Y.Al-nahari S.A.El-Dolil +1 位作者 M.I.Dessouky F.E.Abd El-Samie 《Journal of Central South University》 SCIE EI CAS 2012年第2期393-401,共9页
Call admission control (CAC) and resource reservation (RR) for mobile communication are two important factors that guarantee system efficiency and quality of service (QoS) required for different services in a very sca... Call admission control (CAC) and resource reservation (RR) for mobile communication are two important factors that guarantee system efficiency and quality of service (QoS) required for different services in a very scarce resource as the radio spectrum. A new scheme was proposed which extends the concepts of resource sharing and reservations for wideband code division multiple access (WCDMA) systems with a unique feature of soft capacity. Voice and data traffic were considered. The traffic is further classified into handoff and new requests. The reservation thresholds were dynamically adjusted according to the traffic pattern and mobility prediction in order to achieve the maximum channel utilization, while guaranteeing different QoS constraints. The performance of proposed scheme was evaluated using Markov models. New call blocking probability, handoff call dropping probability, and channel utilization were used as benchmarks for the proposed scheme. 展开更多
关键词 admission control resource reservation wideband code division multiple access resource utilization
在线阅读 下载PDF
Ecological Suitability Evaluation and Planting Division of Potato in County Based on GIS——A Case Study of Shangnan County of Shaanxi Province
9
作者 Yuan Yuan Song Wen-chao +2 位作者 Kang Xiao-fu Guo Yi-chun Chang Qing-rui 《Journal of Northeast Agricultural University(English Edition)》 CAS 2020年第3期87-96,共10页
Potato is one of the important food crops in Shangnan County,Shaanxi Province.Potato planting strategy in this region has great significance for potato planting,according to local conditions and for optimizing regiona... Potato is one of the important food crops in Shangnan County,Shaanxi Province.Potato planting strategy in this region has great significance for potato planting,according to local conditions and for optimizing regional layout.The ecological suitability of potato cultivation in Shangnan County was evaluated by using geographic information system(GIS)technology,county cultivated land resource management information system and analytic hierarchy process(AHP).The evaluation index system of ecological suitability of potatoes in Shangnan County was established by screening the evaluation index of each ecological factor with expert experience method.The AHP and fuzzy evaluation method were applied to the quantitative calculation of the weight of each index.The ecological suitability assessment map of potato planting in Shangnan County was obtained by using the overlay analysis function of ArcGIS 10.2.The results showed that highly suitable area for potato cultivation was 6974.04 hm^2,accounting for 28.07%of the cultivated land.The suitable area was 11205.75 hm^2,accounting for 45.10%of the cultivated land area.These two types of arable land mainly distributed in the shallow hilly area,the middle mountain landform and the river valley area.The remaining arable land in this region mainly distributed in the shallow hills and the mid-mountain landscapes,including the arable land which was reluctantly suitable for potato cultivation and unsuitable for potato cultivation,with 5646.15 and 1022.33 hm^2,respectively,accounting for only 22.72%and 4.11%of the total arable land areas.Therefore,based on the statistics and analyses of potato planting environment in Shangnan County,the pattern of local ecological adaptability distribution was summarized and the spatial distribution map was drawn,thus providing scientific basis for rational distribution and planning of potato in Shangnan County. 展开更多
关键词 POTATO geographic information system ecological suitability planting division
在线阅读 下载PDF
Statement by Dr Edward Van Roy Director,Social Development Division,ESCAP at the opening ceremony on 24 October 1995
10
《开放教育研究》 1995年第1期43-44,共2页
Distinguished participants,ladies and grntlemen:It gives me great pleasure,on behalf of the United Nations Ecomomic and Social Commission for Asia and the Pacific, to join you today at
关键词 Statement by Dr Edward Van Roy Director Social Development division ESCAP at the opening ceremony on 24 October 1995
在线阅读 下载PDF
Clustering method based on data division and partition
11
作者 卢志茂 刘晨 +2 位作者 S.Massinanke 张春祥 王蕾 《Journal of Central South University》 SCIE EI CAS 2014年第1期213-222,共10页
Many classical clustering algorithms do good jobs on their prerequisite but do not scale well when being applied to deal with very large data sets(VLDS).In this work,a novel division and partition clustering method(DP... Many classical clustering algorithms do good jobs on their prerequisite but do not scale well when being applied to deal with very large data sets(VLDS).In this work,a novel division and partition clustering method(DP) was proposed to solve the problem.DP cut the source data set into data blocks,and extracted the eigenvector for each data block to form the local feature set.The local feature set was used in the second round of the characteristics polymerization process for the source data to find the global eigenvector.Ultimately according to the global eigenvector,the data set was assigned by criterion of minimum distance.The experimental results show that it is more robust than the conventional clusterings.Characteristics of not sensitive to data dimensions,distribution and number of nature clustering make it have a wide range of applications in clustering VLDS. 展开更多
关键词 clustering division partition very large data sets (VLDS)
在线阅读 下载PDF
Deformation division of metal flow behavior during extrusion process of 7075 aluminum alloy
12
作者 李峰 初冠南 刘晓晶 《Journal of Central South University》 SCIE EI CAS 2009年第5期738-742,共5页
To reduce defects caused by non-homogeneous metal flow in conventional extrusion,a die with guiding angle was designed to improve the metal flow behavior. The characteristic quantities such as the second invariant of ... To reduce defects caused by non-homogeneous metal flow in conventional extrusion,a die with guiding angle was designed to improve the metal flow behavior. The characteristic quantities such as the second invariant of the deviator stress J2 and Lode's coefficient μ were employed for the division of deformation area. The results show that when the metal is extruded with the guiding angle,no metal flow interface forms at the container's bottom,the dead zone completely disappears,the deformation types of the metal in the plastic deformation area change from three types to one type of tension,and the homogeneity of the deformation as well as metal flow are greatly improved. The non-homogeneous metal flow at the final stage of extrusion is improved,reducing the shrinkage hole at the axis end. The radial stress of the furthest point from the axis is transformed from tensile stress to compressive stress and the axial stress,and decreased from 70.8 to 34.8 MPa. Therefore,the surface cracks caused by additional stress are greatly reduced. 展开更多
关键词 extrusion process flow defect deformation division
在线阅读 下载PDF
基于翅片管温度特征的空冷风机群分区控制
13
作者 万逵芳 王伟 +1 位作者 李波 南雄 《中国电机工程学报》 北大核心 2026年第2期727-735,I0023,共10页
为探究空冷风机群分区控制的工业应用,利用所建模型对翅片管换热过程进行模拟研究,得到翅片管温度分布规律、特征参量及其影响因素。依托某660 MW直接空冷机组,利用在空冷凝汽器上侧布置的大量数字芯片温度传感器在线捕获每个风机单元... 为探究空冷风机群分区控制的工业应用,利用所建模型对翅片管换热过程进行模拟研究,得到翅片管温度分布规律、特征参量及其影响因素。依托某660 MW直接空冷机组,利用在空冷凝汽器上侧布置的大量数字芯片温度传感器在线捕获每个风机单元翅片管的特征参量,给出以特征参量为核心的风机群分区控制策略,实现64台风机16个分区控制的工业应用。结果表明,空冷风机群分区控制后,风机节电率可达48.77%以上,空冷凝汽器面积有效利用率增大。结果可为集群风机分区控制的工业应用提供一定理论依据和工程实现方法,同时指出空冷凝汽器防冻和背压优化的改进空间。 展开更多
关键词 直接空冷机组 空冷凝汽器 风机群 分区调节
在线阅读 下载PDF
Research on Euclidean Algorithm and Reection on Its Teaching
14
作者 ZHANG Shaohua 《应用数学》 北大核心 2025年第1期308-310,共3页
In this paper,we prove that Euclid's algorithm,Bezout's equation and Divi-sion algorithm are equivalent to each other.Our result shows that Euclid has preliminarily established the theory of divisibility and t... In this paper,we prove that Euclid's algorithm,Bezout's equation and Divi-sion algorithm are equivalent to each other.Our result shows that Euclid has preliminarily established the theory of divisibility and the greatest common divisor.We further provided several suggestions for teaching. 展开更多
关键词 Euclid's algorithm division algorithm Bezout's equation
在线阅读 下载PDF
Energy Efficiency Operating Indicator Forecasting and Speed Design Optimization for Polar Ice Class Merchant Vessels
15
作者 LU Yu LI Chen−ran +3 位作者 ZHU Xiang−hang LI Shi−an GU Zhu−hao LIU She−wen 《船舶力学》 北大核心 2025年第6期901-911,共11页
In order to accurately forecast the main engine fuel consumption and reduce the Energy Efficiency Operational Indicator(EEOI)of merchant ships in polar ice areas,the energy transfer relationship between ship-machine-p... In order to accurately forecast the main engine fuel consumption and reduce the Energy Efficiency Operational Indicator(EEOI)of merchant ships in polar ice areas,the energy transfer relationship between ship-machine-propeller is studied by analyzing the complex force situation during ship navigation and building a MATLAB/Simulink simulation platform based on multi-environmental resistance,propeller efficiency,main engine power,fuel consumption,fuel consumption rate and EEOI calculation module.Considering the environmental factors of wind,wave and ice,the route is divided into sections,the calculation of main engine power,main engine fuel consumption and EEOI for each section is completed,and the speed design is optimized based on the simulation model for each section.Under the requirements of the voyage plan,the optimization results show that the energy efficiency operation index of the whole route is reduced by 3.114%and the fuel consumption is reduced by 9.17 t. 展开更多
关键词 Energy Efficiency Operational Indicator ice-class ships segment division design optimization
在线阅读 下载PDF
Design and fabrication of LWDM AWG for data centers with rates above 1.6 Tbps
16
作者 HUANG Song CUI Peng-Wei +9 位作者 WANG Yue WANG Liang-Liang ZHANG Jia-Shun MA Jun-Chi ZHANG Chun-Xue GUO Li-Yong YANG Han-Ming WU Yuan-Da AN Jun-Ming SONG Ze-Guo 《红外与毫米波学报》 北大核心 2025年第3期406-412,共7页
A 16-channel arrayed waveguide grating(AWG)with an 800 GHz channel spacing in the O-band has been developed and fabricated based on silica planar lightwave circuit(PLC)technology.By extending the wave⁃length allocatio... A 16-channel arrayed waveguide grating(AWG)with an 800 GHz channel spacing in the O-band has been developed and fabricated based on silica planar lightwave circuit(PLC)technology.By extending the wave⁃length allocation from 8 channels to 16 channels as specified in IEEE 802.3bs,we increased the number of chan⁃nels and boosted transmission capacity to meet the 1.6 Tbps and higher-speed signal transmission requirements for future data centers.Through optimizing the AWG structure,it has achieved insertion loss(IL)better than-1.61 dB,loss uniformity below 0.35 dB,polarization-dependent loss(PDL)below 0.35 dB,adjacent channel cross⁃talk under-20.05 dB,ripple less than 0.75 dB,center wavelength offset under 0.22 nm and 1 dB bandwidth ex⁃ceeding 2.88 nm.The AWG has been successfully measured to transmit 53 Gbaud 4-level pulse amplitude modu⁃lation(PAM4)signal per channel and the total transmission speed can reach over 1.6 Tbps. 展开更多
关键词 local area network wavelength division multiplexing(LWDM) arrayed waveguide grating(AWG) O-band SILICA planar lightwave circuit(PLC)
在线阅读 下载PDF
可扩展路由器中SPT并行计算的实现 被引量:3
17
作者 张小平 吴建平 +3 位作者 周兴 史峰 赵有健 吴鲲 《电子学报》 EI CAS CSCD 北大核心 2007年第11期2129-2134,共6页
随着互联网的飞速发展,集群结构的下一代核心路由器已经成为研究的重点.在可扩展路由器中(clus- ter router),并行路由算法是关键问题之一.对于广泛部署的OSPF协议,最短路径树(SPT)的并行计算是其并行化的核心难点.本文提出了一种计算... 随着互联网的飞速发展,集群结构的下一代核心路由器已经成为研究的重点.在可扩展路由器中(clus- ter router),并行路由算法是关键问题之一.对于广泛部署的OSPF协议,最短路径树(SPT)的并行计算是其并行化的核心难点.本文提出了一种计算最短路径树的算法-分区Dijkstra算法(D-D),分析了算法性能,并通过模拟实验验证了算法的性能. 展开更多
关键词 可扩展路由器 路由节点 最短路径树 divisional-Dijkstra 并行算法
在线阅读 下载PDF
虚拟样机模型转换及演示技术研究
18
作者 李峰 徐诚 +1 位作者 郭凯 王亚平 《计算机应用》 CSCD 北大核心 2006年第9期2057-2058,2062,共3页
由于三维模型数据格式不一致,导致复杂产品的虚拟样机无法导入D IVISION MockUp软件演示系统。本文以某轴承虚拟样机为例,从模型转换,以及产品演示的角度进行了研究。根据CAD系统和D IVISION MockUp系统之间的图形交换机制,分析了数据... 由于三维模型数据格式不一致,导致复杂产品的虚拟样机无法导入D IVISION MockUp软件演示系统。本文以某轴承虚拟样机为例,从模型转换,以及产品演示的角度进行了研究。根据CAD系统和D IVISION MockUp系统之间的图形交换机制,分析了数据储存的核心系统,成功解决了非标准格式三维实体模型的数据传递问题。通过对比虚拟样机模型,找到了一种在D IVISION演示时保证模型精度和演示速度的新方法,为在虚拟现实环境下应用虚拟样机产品做了有益的探索。 展开更多
关键词 模型转换 虚拟样机 division MOCKUP 虚拟现实
在线阅读 下载PDF
适用于两发射天线V-BLAST OFDM系统的排序插值QR分解算法
19
作者 李颖 张扬 魏急波 《信号处理》 CSCD 北大核心 2007年第5期646-650,共5页
最近提出的插值QR分解算法有效降低了V-BLAST OFDM信号检测的复杂度。在大部分检测算法中,对信道矩阵按某策略排序后可进一步提高算法性能,但插值QR分解算法不能直接应用于这种情况。为解决这一问题,本文结合分组排序与插值QR分解的思路... 最近提出的插值QR分解算法有效降低了V-BLAST OFDM信号检测的复杂度。在大部分检测算法中,对信道矩阵按某策略排序后可进一步提高算法性能,但插值QR分解算法不能直接应用于这种情况。为解决这一问题,本文结合分组排序与插值QR分解的思路,通过引入不同列排序矩阵QR分解间的关系,提出一种适用于两发射天线的低复杂度排序插值QR算法。该算法可作为采用连续干扰抵消或球形译码算法的V-BLAST OFDM信号检测预处理方法。与对插值QR分解算法直接扩展的方法相比,该算法随着接收天线数的增多,复杂度节省程度更为明显,因此更适合基站接收机设计。 展开更多
关键词 V-BLAST(Vertical Bell-Lab's layered Space Time)OFDM(Orthogonal Frequency division Multiplexing) 插值QR分解 信号检测
在线阅读 下载PDF
控制深基坑变形的支撑轴力伺服系统 被引量:110
20
作者 贾坚 谢小林 +1 位作者 罗发扬 翟杰群 《上海交通大学学报》 EI CAS CSCD 北大核心 2009年第10期1589-1594,共6页
结合上海"大上海会德丰广场"深大基坑工程实例,提出了控制软土地区深大基坑卸荷变形的分区卸荷技术对策,根据工程需要,在紧邻运营地铁区间隧道的北区基坑中,研发并首次应用了钢支撑轴力伺服系统.结果表明:所采用的钢支撑轴力... 结合上海"大上海会德丰广场"深大基坑工程实例,提出了控制软土地区深大基坑卸荷变形的分区卸荷技术对策,根据工程需要,在紧邻运营地铁区间隧道的北区基坑中,研发并首次应用了钢支撑轴力伺服系统.结果表明:所采用的钢支撑轴力伺服系统可以将北坑开挖的围护结构变形及地铁隧道变形控制在设定目标内,使隧道的水平位移在4 mm以内,隧道附加沉降在2 mm以内,邻地铁侧围护地连墙变形在13.5 mm以内,从而保护紧邻的运营地铁安全. 展开更多
关键词 深基坑 变形 分区卸荷 支撑轴力 伺服控制
在线阅读 下载PDF
上一页 1 2 8 下一页 到第
使用帮助 返回顶部