Considering the problems in the discrimination of fracture penetration and the evaluation of fracturing performance in the stimulation of thin sand-mud interbedded reservoirs in the eighth member of Shihezi Formation ...Considering the problems in the discrimination of fracture penetration and the evaluation of fracturing performance in the stimulation of thin sand-mud interbedded reservoirs in the eighth member of Shihezi Formation of Permian(He-8 Member)in the Sulige gas field,a geomechanical model of thin sand-mud interbedded reservoirs considering interlayer heterogeneity was established.The experiment of hydraulic fracture penetration was performed to reveal the mechanism of initiation–extension–interaction–penetration of hydraulic fractures in the thin sand-mud interbedded reservoirs.The unconventional fracture model was used to clarify the vertical initiation and extension characteristics of fractures in thin interbedded reservoirs through numerical simulation.The fracture penetration discrimination criterion and the fracturing performance evaluation method were developed.The results show that the interlayer stress difference is the main geological factor that directly affects the fracture morphology during hydraulic fracturing.When the interlayer stress difference coefficient is less than 0.4 in the Sulige gas field,the fractures can penetrate the barrier and extend in the target sandstone layer.When the interlayer stress difference coefficient is not less than 0.4 and less than 0.45,the factures can penetrate the barrier but cannot extend in the target sandstone layers.When the interlayer stress difference coefficient is greater than 0.45,the fractures only extend in the perforated reservoir,but not penetrate the layers.Increasing the viscosity and pump rates of the fracturing fluid can compensate for the energy loss and break through the barrier limit.The injection of high viscosity(50–100 mPa·s)fracturing fluid at high pump rates(12–18 m^(3)/min)is conducive to fracture penetration in the thin sand-mud interbedded reservoirs in the Sulige gas field.展开更多
North Africa, which is one of the main oil and gas producing regions in the world, is best known for its subsalt Paleozoic-Triassic reservoirs and Paleozoic source rocks. Hydrocarbon abundance varies greatly from one ...North Africa, which is one of the main oil and gas producing regions in the world, is best known for its subsalt Paleozoic-Triassic reservoirs and Paleozoic source rocks. Hydrocarbon abundance varies greatly from one structural domain to another areally and from one stratigraphic interval to another vertically. Analyses of the essential elements and geological processes of the Paleozoic petroleum system indicate that the distribution of the Lower Silurian shale source rocks, the development of a thick Mesozoic overburden, the presence of the Upper Triassic-Lower Jurassic evaporite seal are the most important factors goveming the distribution of the Paleozoic-sourced hydrocarbons in North Africa. The Mesozoic sequence plays a critical role for hydrocarbons to accumulate by enabling the maturation of the Paleozoic source rocks during the Mesozoic-Paleogene times and preserving the accumulated hydrocarbons. Basins and surrounding uplifts, particularly the latter, with a thick Mesozoic sequence and a regional evaporite seal generally have abundant hydrocarbons. Basins where only a thin Mesozoic overburden was developed tend to have a very poor to moderate hydrocarbon prospectivity.展开更多
分散控制系统(Distributed Control System,DCS)作为火电厂汽轮机自动化控制的关键支撑,承担着数据采集、传输及控制指令下达的重要任务。基于此,分析火电厂汽轮机DCS通信,概述其定义、原理及主要环节,明确其在火电厂运行中的关键地位...分散控制系统(Distributed Control System,DCS)作为火电厂汽轮机自动化控制的关键支撑,承担着数据采集、传输及控制指令下达的重要任务。基于此,分析火电厂汽轮机DCS通信,概述其定义、原理及主要环节,明确其在火电厂运行中的关键地位。从专业技术层面,精准指出通信中存在的如信号干扰导致数据传输错误、通信协议兼容性差影响设备协同、网络拓扑不合理引发通信延迟及硬件老化带来通信不稳定等难点,并结合具体实例阐述其后果。针对性地提出优化策略,包括采用屏蔽与滤波技术抗干扰、规范协议并应用转换技术、优化网络拓扑结构及更新维护硬件设备等。文章旨在为提升DCS通信性能,保障火电厂汽轮机高效运行提供参考。展开更多
Based on three-dimensional seismic interpretation, structural and sedimentary feature analysis, and examination of fluid properties and production dynamics, the regularity and main controlling factors of hydrocarbon a...Based on three-dimensional seismic interpretation, structural and sedimentary feature analysis, and examination of fluid properties and production dynamics, the regularity and main controlling factors of hydrocarbon accumulation in the Tazhong uplift, Tarim Basin are investigated. The results show that the oil and gas in the Tazhong uplift has the characteristics of complex accumulation mainly controlled by faults, and more than 80% of the oil and gas reserves are enriched along fault zones. There are large thrust and strike-slip faults in the Tazhong uplift, and the coupling relationship between the formation and evolution of the faults and accumulation determine the difference in complex oil and gas accumulations. The active scale and stage of faults determine the fullness of the traps and the balance of the phase, that is, the blocking of the transport system, the insufficient filling of oil and gas, and the unsteady state of fluid accumulation are dependent on the faults. The multi-period tectonic sedimentary evolution controls the differences of trap conditions in the fault zones, and the multi-phase hydrocarbon migration and accumulation causes the differences of fluid distribution in the fault zones. The theory of differential oil and gas accumulation controlled by fault is the key to the overall evaluation, three-dimensional development and discovery of new reserves in the Tazhong uplift.展开更多
Aiming at the simulation of multi-phase flow in the wellbore during the processes of gas kick and well killing of complex-structure wells(e.g.,directional wells,extended reach wells,etc.),a database including 3561 gro...Aiming at the simulation of multi-phase flow in the wellbore during the processes of gas kick and well killing of complex-structure wells(e.g.,directional wells,extended reach wells,etc.),a database including 3561 groups of experimental data from 32 different data sources is established.Considering the effects of fluid viscosity,pipe size,interfacial tension,fluid density,pipe inclination and other factors on multi-phase flow parameters,a new gas-liquid two-phase drift flow relation suitable for the full flow pattern and full dip range is established.The distribution coefficient and gas drift velocity models with a pipe inclination range of-90°–90°are established by means of theoretical analysis and data-driven.Compared with three existing models,the proposed models have the highest prediction accuracy and most stable performance.Using a well killing case with the backpressure method in the field,the applicability of the proposed model under the flow conditions with a pipe inclination range of-90°–80°is verified.The errors of the calculated shut in casing pressure,initial back casing pressure and casing pressure when adjusting the displacement are 2.58%,3.43%,5.35%,respectively.The calculated results of the model are in good agreement with the field backpressure data.展开更多
涡轮机组合循环(Turbine based combined cycle,TBCC)发动机控制系统通信网络拓扑结构是其分布式控制系统方案设计的重要部分,优化网络拓扑结构可提高发动机推重比和控制系统可靠性。本文基于智能优化算法提出TBCC分布式控制系统网络拓...涡轮机组合循环(Turbine based combined cycle,TBCC)发动机控制系统通信网络拓扑结构是其分布式控制系统方案设计的重要部分,优化网络拓扑结构可提高发动机推重比和控制系统可靠性。本文基于智能优化算法提出TBCC分布式控制系统网络拓扑结构优化方法。基于图论建立TBCC几何模型和网格模型,以重量和可靠性为优化性能指标,同时考虑发动机表面高温区域以及控制节点的工作可靠性,分别采用粒子群算法和遗传算法优化星形结构中智能中央节点位置、中央节点的环形拓扑结构,获得星形-环形混合拓扑结构。仿真实例表明,基于本文方法优化所得的混合拓扑结构相较于星形集中式控制结构,系统重量降低了51.9%。展开更多
基金Supported by the National Key Research and Development Program of China(2022YFE0129800)CNPC and China University of Petroleum(Beijing)Strategic Cooperation Science and Technology Special Project(ZLZX2020-02)。
文摘Considering the problems in the discrimination of fracture penetration and the evaluation of fracturing performance in the stimulation of thin sand-mud interbedded reservoirs in the eighth member of Shihezi Formation of Permian(He-8 Member)in the Sulige gas field,a geomechanical model of thin sand-mud interbedded reservoirs considering interlayer heterogeneity was established.The experiment of hydraulic fracture penetration was performed to reveal the mechanism of initiation–extension–interaction–penetration of hydraulic fractures in the thin sand-mud interbedded reservoirs.The unconventional fracture model was used to clarify the vertical initiation and extension characteristics of fractures in thin interbedded reservoirs through numerical simulation.The fracture penetration discrimination criterion and the fracturing performance evaluation method were developed.The results show that the interlayer stress difference is the main geological factor that directly affects the fracture morphology during hydraulic fracturing.When the interlayer stress difference coefficient is less than 0.4 in the Sulige gas field,the fractures can penetrate the barrier and extend in the target sandstone layer.When the interlayer stress difference coefficient is not less than 0.4 and less than 0.45,the factures can penetrate the barrier but cannot extend in the target sandstone layers.When the interlayer stress difference coefficient is greater than 0.45,the fractures only extend in the perforated reservoir,but not penetrate the layers.Increasing the viscosity and pump rates of the fracturing fluid can compensate for the energy loss and break through the barrier limit.The injection of high viscosity(50–100 mPa·s)fracturing fluid at high pump rates(12–18 m^(3)/min)is conducive to fracture penetration in the thin sand-mud interbedded reservoirs in the Sulige gas field.
文摘North Africa, which is one of the main oil and gas producing regions in the world, is best known for its subsalt Paleozoic-Triassic reservoirs and Paleozoic source rocks. Hydrocarbon abundance varies greatly from one structural domain to another areally and from one stratigraphic interval to another vertically. Analyses of the essential elements and geological processes of the Paleozoic petroleum system indicate that the distribution of the Lower Silurian shale source rocks, the development of a thick Mesozoic overburden, the presence of the Upper Triassic-Lower Jurassic evaporite seal are the most important factors goveming the distribution of the Paleozoic-sourced hydrocarbons in North Africa. The Mesozoic sequence plays a critical role for hydrocarbons to accumulate by enabling the maturation of the Paleozoic source rocks during the Mesozoic-Paleogene times and preserving the accumulated hydrocarbons. Basins and surrounding uplifts, particularly the latter, with a thick Mesozoic sequence and a regional evaporite seal generally have abundant hydrocarbons. Basins where only a thin Mesozoic overburden was developed tend to have a very poor to moderate hydrocarbon prospectivity.
文摘分散控制系统(Distributed Control System,DCS)作为火电厂汽轮机自动化控制的关键支撑,承担着数据采集、传输及控制指令下达的重要任务。基于此,分析火电厂汽轮机DCS通信,概述其定义、原理及主要环节,明确其在火电厂运行中的关键地位。从专业技术层面,精准指出通信中存在的如信号干扰导致数据传输错误、通信协议兼容性差影响设备协同、网络拓扑不合理引发通信延迟及硬件老化带来通信不稳定等难点,并结合具体实例阐述其后果。针对性地提出优化策略,包括采用屏蔽与滤波技术抗干扰、规范协议并应用转换技术、优化网络拓扑结构及更新维护硬件设备等。文章旨在为提升DCS通信性能,保障火电厂汽轮机高效运行提供参考。
基金Supported by the China Science and Technology Major Project(2017ZX05008-004-001,2017ZX05001-001)Chinese Academy of Sciences Strategic Pilot Project(XDA14010302)
文摘Based on three-dimensional seismic interpretation, structural and sedimentary feature analysis, and examination of fluid properties and production dynamics, the regularity and main controlling factors of hydrocarbon accumulation in the Tazhong uplift, Tarim Basin are investigated. The results show that the oil and gas in the Tazhong uplift has the characteristics of complex accumulation mainly controlled by faults, and more than 80% of the oil and gas reserves are enriched along fault zones. There are large thrust and strike-slip faults in the Tazhong uplift, and the coupling relationship between the formation and evolution of the faults and accumulation determine the difference in complex oil and gas accumulations. The active scale and stage of faults determine the fullness of the traps and the balance of the phase, that is, the blocking of the transport system, the insufficient filling of oil and gas, and the unsteady state of fluid accumulation are dependent on the faults. The multi-period tectonic sedimentary evolution controls the differences of trap conditions in the fault zones, and the multi-phase hydrocarbon migration and accumulation causes the differences of fluid distribution in the fault zones. The theory of differential oil and gas accumulation controlled by fault is the key to the overall evaluation, three-dimensional development and discovery of new reserves in the Tazhong uplift.
基金Supported by the Project of National Natural Science Foundation of China(51991363,51974350)Young Changjiang Scholars Award Program(Q2016135)Ministry of Education Innovation Team Project(IRT_14R58)。
文摘Aiming at the simulation of multi-phase flow in the wellbore during the processes of gas kick and well killing of complex-structure wells(e.g.,directional wells,extended reach wells,etc.),a database including 3561 groups of experimental data from 32 different data sources is established.Considering the effects of fluid viscosity,pipe size,interfacial tension,fluid density,pipe inclination and other factors on multi-phase flow parameters,a new gas-liquid two-phase drift flow relation suitable for the full flow pattern and full dip range is established.The distribution coefficient and gas drift velocity models with a pipe inclination range of-90°–90°are established by means of theoretical analysis and data-driven.Compared with three existing models,the proposed models have the highest prediction accuracy and most stable performance.Using a well killing case with the backpressure method in the field,the applicability of the proposed model under the flow conditions with a pipe inclination range of-90°–80°is verified.The errors of the calculated shut in casing pressure,initial back casing pressure and casing pressure when adjusting the displacement are 2.58%,3.43%,5.35%,respectively.The calculated results of the model are in good agreement with the field backpressure data.
文摘涡轮机组合循环(Turbine based combined cycle,TBCC)发动机控制系统通信网络拓扑结构是其分布式控制系统方案设计的重要部分,优化网络拓扑结构可提高发动机推重比和控制系统可靠性。本文基于智能优化算法提出TBCC分布式控制系统网络拓扑结构优化方法。基于图论建立TBCC几何模型和网格模型,以重量和可靠性为优化性能指标,同时考虑发动机表面高温区域以及控制节点的工作可靠性,分别采用粒子群算法和遗传算法优化星形结构中智能中央节点位置、中央节点的环形拓扑结构,获得星形-环形混合拓扑结构。仿真实例表明,基于本文方法优化所得的混合拓扑结构相较于星形集中式控制结构,系统重量降低了51.9%。
