The poor electronic conductivity of metal-organic framework(MOF)materials hinders their direct application in the field of electrocatalysis in fuel cells.Herein,we proposed a strategy of embedding carbon nanotubes(CNT...The poor electronic conductivity of metal-organic framework(MOF)materials hinders their direct application in the field of electrocatalysis in fuel cells.Herein,we proposed a strategy of embedding carbon nanotubes(CNTs)during the growth process of MOF crystals,synthesizing a metalloporphyrin-based MOF catalyst TCPPCo-MOF-CNT with a unique CNT-intercalated MOF structure.Physical characterization revealed that the CNTs enhance the overall conductivity while retaining the original characteristics of the MOF and metalloporphyrin.Simultaneously,the insertion of CNTs generated adequate mesopores and created a hierarchical porous structure that enhances mass transfer efficiency.X-ray photoelectron spectroscopic analysis confirmed that the C atom in CNT changed the electron cloud density on the catalytic active center Co,optimizing the electronic structure.Consequently,the E1/2 of the TCPPCo-MOF-CNT catalyst under neutral conditions reached 0.77 V(vs.RHE),outperforming the catalyst without CNTs.When the TCPPCo-MOF-CNT was employed as the cathode catalyst in assembling microbial fuel cells(MFCs)with Nafion-117 as the proton exchange membrane,the maxi-mum power density of MFCs reached approximately 500 mW·m-2.展开更多
This paper investigates the macroscopic and microscopic characteristics of viscosity reduction and quality improvement of heavy oil in a supercritical water environment through laboratory experiments and testing.The e...This paper investigates the macroscopic and microscopic characteristics of viscosity reduction and quality improvement of heavy oil in a supercritical water environment through laboratory experiments and testing.The effect of three reaction parameters,i.e.reaction temperature,reaction time and oil-water ratio,is analyzed on the product and their correlation with viscosity.The results show that the flow state of heavy oil is significantly improved with a viscosity reduction of 99.4%in average after the reaction in the supercritical water.Excessively high reaction temperature leads to a higher content of resins and asphaltenes,with significantly increasing production of coke.The optimal temperature ranges in 380–420℃.Prolonged reaction time could continuously increase the yield of light oil,but it will also results in the growth of resins and asphaltenes,with the optimal reaction time of 150 min.Reducing the oil-water ratio helps improve the diffusion environment within the reaction system and reduce the content of resins and asphaltenes,but it will increase the cost of heavy oil treatment.An oil-water ratio of 1︰2 is considered as optimum to balance the quality improvement,viscosity reduction and reaction economics.The correlation of the three reaction parameters relative to the oil sample viscosity is ranked as temperature,time and oil-water ratio.Among the four fractions of heavy oil,the viscosity is dominated by asphaltene content,followed by aromatic content and less affected by resins and saturates contents.展开更多
The ability to unlock the interplay between the activity and stability of oxygen reduction reaction(ORR)represents an important endeavor toward creating robust ORR catalysts for efficient fuel cells.Herein,we report a...The ability to unlock the interplay between the activity and stability of oxygen reduction reaction(ORR)represents an important endeavor toward creating robust ORR catalysts for efficient fuel cells.Herein,we report an effective strategy to concurrent enhance the activity and stability of ORR catalysts via constructing atomically dispersed Fe-Mn dualmetal sites on N-doped carbon(denoted(FeMn-DA)-N-C)for both anion-exchange membrane fuel cells(AEMFC)and proton exchange membrane fuel cells(PEMFC).The(FeMn-DA)-N-C catalysts possess ample dual-metal atoms consisting of adjacent Fe-N_(4)and Mn-N_(4)sites on the carbon surface,yielded via a facile doping-adsorption-pyrolysis route.The introduction of Mn carries several advantageous attributes:increasing the number of active sites,effectively anchoring Fe due to effective electron transfer to Mn(revealed by X-ray absorption spectroscopy and density-functional theory(DFT),thus preventing the aggregation of Fe),and effectively circumventing the occurrence of Fenton reaction,thus reducing the consumption of Fe.The(FeMn-DA)-N-C catalysts showcase half-wave potentials of 0.92 and 0.82 V in 0.1 M KOH and 0.1 M HClO_(4),respectively,as well as outstanding stability.As manifested by DFT calculations,the introduction of Mn affects the electronic structure of Fe,down-shifts the d-band Fe active center,accelerates the desorption of OH groups,and creates higher limiting potentials.The AEMFC and PEMFC with(FeMn-DA)-N-C as the cathode catalyst display high power densities of 1060 and 746 mW cm^(-2),respectively,underscoring their promising potential for practical applications.Our study highlights the robustness of designing Fe-containing dual-atom ORR catalysts to promote both activity and stability for energy conversion and storage materials and devices.展开更多
The synergy of single atoms(SAs)and nanoparticles(NPs)has demonstrated great potential in promoting the electrocatalytic carbon dioxide reduction reaction(CO_(2)RR);however,the rationalization of the SAs/NPs proportio...The synergy of single atoms(SAs)and nanoparticles(NPs)has demonstrated great potential in promoting the electrocatalytic carbon dioxide reduction reaction(CO_(2)RR);however,the rationalization of the SAs/NPs proportion remains one challenge for the catalyst design.Herein,a Ni2+-loaded porous poly(ionic liquids)(PIL)precursor synthesized through the free radical self-polymerization of the ionic liquid monomer,1-allyl-3-vinylimidazolium chloride,was pyrolyzed to prepare the Ni,N co-doped carbon materials,in which the proportion of Ni SAs and NPs could be facilely modulated by controlling the annealing temperature.The catalyst Ni-NC-1000 with a moderate proportion of Ni SAs and NPs exhibited high efficiency in the electrocatalytic conversion of CO_(2)into CO.Operando Ni K-edge X-ray absorption near-edge structure(XANES)spectra and theoretical calculations were conducted to gain insight into the synergy of Ni SAs and NPs.The charge transfer from Ni NPs to the surrounding carbon layer and then to the Ni SAs resulted in the electron-enriched Ni SAs active sites.In the electroreduction of CO_(2),the coexistence of Ni SAs and NPs strengthened the CO_(2)activation and the affinity towards the key intermediate of*COOH,lowering the free energy for the potential-determining*CO_(2)→*COOH step,and therefore promoted the catalysis efficiency.展开更多
The primary objective in aircraft transportation is to minimize turbulent drag, thereby conserving energy and reducing emissions. We propose a sector-shaped counter-flow dielectric barrier discharge plasma actuator, w...The primary objective in aircraft transportation is to minimize turbulent drag, thereby conserving energy and reducing emissions. We propose a sector-shaped counter-flow dielectric barrier discharge plasma actuator, which leverages jet synthesis for drag reduction. A drag control experiment was conducted in a low-speed wind tunnel with a controlled flow velocity of 9.6 m/s(Re = 1.445 × 10^(4)). This study investigated the effects of varying pulse frequencies and actuation voltages on the turbulent boundary layer. Using a hot-wire measurement system, we analyzed the pulsating and time-averaged velocity distributions within the boundary layer to evaluate the streamwise turbulent drag reduction. The results show that the local TDR decreases as the pulse frequency increases, reaching a maximum reduction of approximately 20.97% at a pulse frequency of 50 Hz. In addition, as the actuation voltage increases, the friction coefficient decreases, increasing the drag reduction rate. The maximum drag reduction of approximately 33.34% is achieved at an actuation voltage of 10 kV.展开更多
Electrocatalytic nitrate reduction reaction (NO_(3)-RR) to ammonia under ambient conditions is expected to be a green process for ammonia synthesis and alleviate water pollution issues.We report a CuO nanoparticles in...Electrocatalytic nitrate reduction reaction (NO_(3)-RR) to ammonia under ambient conditions is expected to be a green process for ammonia synthesis and alleviate water pollution issues.We report a CuO nanoparticles incorporated on nitrogen-doped porous carbon (CuO@NC) catalyst for NO_(3)-RR.Part of Cu(Ⅱ) is reduced to Cu(Ⅰ) during the NO_(3)-RR process to construct Cu(Ⅰ)-Cu(Ⅱ) pairs,confirmed by in situ X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy.Density functional theory (DFT) calculations indicated that the formation of Cu(Ⅰ) could provide a reaction path with smaller energy barrier for NO_(3)-RR,while Cu(Ⅱ) effectively suppressed the competition of hydrogen evolution reaction (HER).As a result,CuO@NC catalyst achieved a Faradaic efficiency of 84.2% at -0.49 V versus reversible hydrogen electrode (RHE),and a NH_(3)yield rate of 17.2 mg h^(-1)mg^(-1)cat.at -0.79 V vs.RHE,higher than the HaberBosch process (<3.4 g h^(-1)g^(-1)cat.).This work may open a new avenue for effective NO_(3)-RR by modulating oxidation states.展开更多
Sodium chloride is one of the most widely used additives in meat curing.However,cured meat products contribute to a portion of the total sodium dietary intake.Consumers and researchers'concern about excessive sodi...Sodium chloride is one of the most widely used additives in meat curing.However,cured meat products contribute to a portion of the total sodium dietary intake.Consumers and researchers'concern about excessive sodium intake has prompted the food industry to consider ways to reduce salt content of cured meat products.The aim of this review is to provide a broad but comprehensive understanding of salt reduction strategies for cured meat products.The implications and limitations of each approach were discussed.Green technologies treatments,such as ultrasonic technology,high-pressure processing,seem to be potential to ensure microbiological safety in low-sodium cured meat products.However,these novel technologies can cause protein and fat oxidization in meat products.A combination of multiple treatments could give the desired effect.In addition,different parameter conditions need to be set according to the specific meat to achieve better salt reduction effect.展开更多
Converting CO_(2)and water into valuable chemicals like plant do is considered a promising approach to address both environmental and energy issues.Taking inspiration from the structures of natural leaves,we designed ...Converting CO_(2)and water into valuable chemicals like plant do is considered a promising approach to address both environmental and energy issues.Taking inspiration from the structures of natural leaves,we designed and synthesized a novel copper-coordinated covalent triazine framework(CuCTF)supported by silicon nanowire arrays on wafer chip.This marks the first-ever application of such a hybrid material in the photoelectrocatalytic reduction of CO_(2)under mild conditions.The Si@CuCTF6 heterojunction has exhibited exceptional selectivity of 95.6%towards multicarbon products(C_(2+))and apparent quantum efficiency(AQE)of 0.89%for carbon-based products.The active sites of the catalysts are derived from the nitrogen atoms of unique triazine ring structure in the ordered porous framework and the abundant Cu-N coordination sites with bipyridine units.Furthermore,through DFT calculations and operando FTIR spectra analysis,we proposed a comprehensive mechanism for the photoelectrocatalytic CO_(2)reduction,confirming the existence of key intermediate species such as*CO_(2)-,*=C=O,*CHO and*CO-CHO etc.This work not only provides a new way to mimic photosynthesis of plant leaves but also gives a new opportunity to enter this research field in the future.展开更多
Artificial carbon fixation is a promising pathway for achieving the carbon cycle and environment remediation.However,the sluggish kinetics of oxygen evolution reaction(OER)and poor selectivity of CO_(2) reduction seri...Artificial carbon fixation is a promising pathway for achieving the carbon cycle and environment remediation.However,the sluggish kinetics of oxygen evolution reaction(OER)and poor selectivity of CO_(2) reduction seriously limited the overall conversion efficiencies of solar energy to chemical fuels.Herein,we demonstrated a facile and feasible strategy to rationally regulate the coordination environment and electronic structure of surface-active sites on both photoanode and cathode.More specifically,the defect engineering has been employed to reduce the coordination number of ultrathin FeNi catalysts decorated on BiVO4 photoanodes,resulting in one of the highest OER activities of 6.51 mA cm^(−2)(1.23 VRHE,AM 1.5G).Additionally,single-atom cobalt(II)phthalocyanine anchoring on the N-rich carbon substrates to increase Co–N coordination number remarkably promotes CO_(2) adsorption and activation for high selective CO production.Their integration achieved a record activity of 109.4μmol cm^(−2) h−1 for CO production with a faradaic efficiency of>90%,and an outstanding solar conversion efficiency of 5.41%has been achieved by further integrating a photovoltaic utilizing the sunlight(>500 nm).展开更多
The oxygen reduction reaction(ORR)could be effectively regulated by adjusting electron configurations and optimizing chemical bonds.Herein,we have achieved the modulation of electron distribution in Fe single atomic(F...The oxygen reduction reaction(ORR)could be effectively regulated by adjusting electron configurations and optimizing chemical bonds.Herein,we have achieved the modulation of electron distribution in Fe single atomic(Fe_(SA))sites through Fe atomic clusters(Fe_(AC))via a confined pyrolysis approach,thereby enhancing their intrinsic ORR activity.X-ray absorption spectroscopy has confirmed that the presence of iron atomic dusters could influence the electron distribution at Fe-N_(4)sites.The Fe_(SA)/Fe_(AC)-NC catalyst exhibits a half-wave potential of 0.88 V,surpassing the individual Fe_(SA)-NC structure.Through electronic structure analysis,it could be seen that iron atom clusters can affect Fe-N_(4)sites through long-range effects,and then effectively lower reaction barriers and enhance the reaction kinetics at Fe-N_(4)sites.The synthetic approach might pave the way for constructing highly active catalysts with tunable atomic structures,representing an effective and universal technique for electron modulation in M-N-C systems.This work provides enlightenment for the exploration of more efficient single-atom electrocatalysts and the optimization of the performance of atomic electrocatalysts.Furthermore,a zinc-air battery assembled using it on their cathode deliver a high peak power density(205.7 mW cm^(-2))and a high-specific capacity of 807.5 mA h g^(-1).This study offers a fresh approach to effectively enhance the synergistic interaction of between Fe single atom and Fe atomic clusters for improving ORR activity and energy storage.展开更多
The recycling of CO_(2)through electrochemical processes offers a promising solution for alleviating the greenhouse effect;however,the activation of CO_(2)and desorption of^(*)CO in electrocatalytic CO_(2)reduction(EC...The recycling of CO_(2)through electrochemical processes offers a promising solution for alleviating the greenhouse effect;however,the activation of CO_(2)and desorption of^(*)CO in electrocatalytic CO_(2)reduction(ECR)frequently encounter high energy barriers and competitive hydrogen evolution reactions(HERs),which are urgent problems that need to be addressed.In this study,a catalyst(P100-Fe-N/C)with homogeneous P-tuned FeN_(2)binuclear sites(N_(2)PFe-FePN_(2))was successfully synthesised,demonstrating satisfactory performance in the ECR to CO.P100-Fe-N/C attains a peak FECOof 98.01%and a normalized TOF of 664.7 h-1at-0.7 VRHE,surpassing the performance of the Fe binuclear catalyst without P and singleatoms catalysts.In the MEA cell,a FECOexceeding 90%can still be achieved.Density functional theory analysis indicates that the asymmetric coordination configuration induced by the incorporation of P facilitates a reduction in the system's energy.The modulation of P results in the d-band centre of the catalyst being positioned closer to the Fermi level,which facilitates the interaction of the catalyst with CO_(2),allowing more electrons to be injected into the CO_(2)molecule at the Fe binuclear sites and inhibiting the HER.The P-tuned FeN_(2)binuclear sites effectively lower the^(*)CO desorption barrier.展开更多
The electrochemical reduction of carbon dioxide(CO_(2))into value-added chemicals and fuels has been extensively studied as a promising strategy for mitigating environmental issues and achieving sustainable energy con...The electrochemical reduction of carbon dioxide(CO_(2))into value-added chemicals and fuels has been extensively studied as a promising strategy for mitigating environmental issues and achieving sustainable energy conversion.Substantial efforts have been made to improve the understanding of CO_(2)reduction reaction(CO_(2)RR)mechanisms by computational and spectroscopic studies.An in-depth understanding of CO_(2)RR mechanism can provide the guidance and criteria for designing high-efficiency catalysts,and hence,steering CO_(2)RR to desired products.This review systematically discusses the formation mechanisms and reaction pathways of various CO_(2)RR products,including C_(1)products(CO,HCOOH,and CH_(4)),C_(2)products(C_(2)H_(4),C_(2)H_(5)OH,and CH_(3)COOH),and C_(3+)products(C_(3)H_(6),C_(3)H_(7)OH,and others).The reaction pathways are elucidated by analyzing the adsorption behavior,energy barriers,and intermediate coupling steps involved in the generation of each product.Particular emphasis is placed on the key intermediates,such as^(*)OCHO,^(*)COOH,^(*)CO,^(*)OCCOH,and^(*)CCO,which play crucial roles in determining the product selectivity.The effects of catalyst composition,morphology,and electronic structure on the adsorption and activation of these intermediates are also discussed.Moreover,advanced characterization techniques,including in-situ spectroscopy and isotopic labeling experiments,are highlighted for their contributions to unraveling the reaction mechanisms.The review aims to provide critical insights to reveal the activity-determining para meters and underlying CO_(2)RR mechanisms,which will guide the rational design of next-generation electrocatalysts for selective CO^(2)RR towards high-value products.展开更多
The Cu^(+)/Cu^(0)sites of copper-based catalysts are crucial for enhancing the production of multicarbon(C_(2+))products from electrochemical CO_(2)reduction reaction(eCO_(2)RR).However,the unstable Cu^(+)and insuffic...The Cu^(+)/Cu^(0)sites of copper-based catalysts are crucial for enhancing the production of multicarbon(C_(2+))products from electrochemical CO_(2)reduction reaction(eCO_(2)RR).However,the unstable Cu^(+)and insufficient Cu^(+)/Cu^(0)active sites lead to their limited selectivity and stability for C_(2+)production.Herein,we embedded copper oxide(CuO_(x))particles into porous nitrogen-doped carbon nanofibers(CuO_(x)@PCNF)by pyrolysis of the electrospun fiber film containing ZIF-8 and Cu_(2)O particles.The porous nitrogendoped carbon nanofibers protected and dispersed Cu^(+)species,and its micro porous structure enhanced the interaction between CuO_(x)and reactants during eCO_(2)RR.The obtained CuO_(x)@PCNF created more effective and stable Cu^(+)/Cu^(0)active sites.It showed a high Faradaic efficiency of 62.5%for C_(2+)products in Hcell,which was 2 times higher than that of bare CuO_(x)(~31.1%).Furthermore,it achieved a maximum Faradaic efficiency of 80.7%for C_(2+)products in flow cell.In situ characterization and density functional theory(DFT)calculation confirmed that the N-doped carbon layer protected Cu^(+)from electrochemical reduction and lowered the energy barrier for the dimerization of^(*)CO.Stable and exposed Cu^(+)/Cu^(0)active sites enhanced the enrichment of^(*)CO and promoted the C-C coupling reaction on the catalyst surface,which facilitated the formation of C_(2+)products.展开更多
Electrochemical reduction of NO_(2)-to NH_(3)(NO_(2)-RR) is recognized as an appealing approach for achieving renewable NH_(3)synthesis and waste NO_(2)-removal.Herein,we report isolated Bi alloyed Ru (Bi1Ru) as an ef...Electrochemical reduction of NO_(2)-to NH_(3)(NO_(2)-RR) is recognized as an appealing approach for achieving renewable NH_(3)synthesis and waste NO_(2)-removal.Herein,we report isolated Bi alloyed Ru (Bi1Ru) as an efficient NO_(2)-RR catalyst.Theoretical calculations and in situ electrochemical measurements reveal the creation of Bi1-Ru dual sites which can remarkably promote NO_(2)-activation and suppress proton adsorption,while accelerating the NO_(2)-RR protonation energetics to render a high NO_(2)--to-NH_(3)conversion efficiency.Remarkably,Bi1Ru assembled in a flow cell delivers an NH_(3)yield rate of 1901.4μmol h^(-1)cm^(-2)and an NH_(3)-Faradaic efficiency of 94.3%at an industrial-level current density of 324.3 mA cm^(-2).This study offers new perspectives for designing and constructing p-block single-atom alloys as robust and high-current-density NO_(2)-RR catalysts toward the ammonia electrosynthesis.展开更多
Atomically dispersed catalysts exhibit significant influence on facilitating the sluggish oxygen reduction reaction(ORR)kinetics with high atom economy,owing to remarkable attributes including nearly 100%atomic utiliz...Atomically dispersed catalysts exhibit significant influence on facilitating the sluggish oxygen reduction reaction(ORR)kinetics with high atom economy,owing to remarkable attributes including nearly 100%atomic utilization and exceptional catalytic functionality.Furthermore,accurately controlling atomic physical properties including spin,charge,orbital,and lattice degrees of atomically dispersed catalysts can realize the optimized chemical properties including maximum atom utilization efficiency,homogenous active centers,and satisfactory catalytic performance,but remains elusive.Here,through physical and chemical insight,we review and systematically summarize the strategies to optimize atomically dispersed ORR catalysts including adjusting the atomic coordination environment,adjacent electronic orbital and site density,and the choice of dual-atom sites.Then the emphasis is on the fundamental understanding of the correlation between the physical property and the catalytic behavior for atomically dispersed catalysts.Finally,an overview of the existing challenges and prospects to illustrate the current obstacles and potential opportunities for the advancement of atomically dispersed catalysts in the realm of electrocatalytic reactions is offered.展开更多
Carbon dioxide conversion into valuable products using photocatalysis and electrocatalysis is an effective approach to mitigate global environmental issues and the energy shortages. Among the materials utilized for ca...Carbon dioxide conversion into valuable products using photocatalysis and electrocatalysis is an effective approach to mitigate global environmental issues and the energy shortages. Among the materials utilized for catalytic reduction of CO_(2), Cu-based materials are highly advantageous owing to their widespread availability, cost-effectiveness, and environmental sustainability. Furthermore, Cu-based materials demonstrate interesting abilities in the adsorption and activation of carbon dioxide, allowing the formation of C_(2+) compounds through C–C coupling process. Herein, the basic principles of photocatalytic CO_(2) reduction reactions(PCO_(2)RR) and electrocatalytic CO_(2) reduction reaction(ECO_(2)RR) and the pathways for the generation C_(2+) products are introduced. This review categorizes Cu-based materials into different groups including Cu metal, Cu oxides, Cu alloys, and Cu SACs, Cu heterojunctions based on their catalytic applications. The relationship between the Cu surfaces and their efficiency in both PCO_(2)RR and ECO_(2)RR is emphasized. Through a review of recent studies on PCO_(2)RR and ECO_(2)RR using Cu-based catalysts, the focus is on understanding the underlying reasons for the enhanced selectivity toward C_(2+) products. Finally, the opportunities and challenges associated with Cu-based materials in the CO_(2) catalytic reduction applications are presented, along with research directions that can guide for the design of highly active and selective Cu-based materials for CO_(2) reduction processes in the future.展开更多
Global variance reduction is a bottleneck in Monte Carlo shielding calculations.The global variance reduction problem requires that the statistical error of the entire space is uniform.This study proposed a grid-AIS m...Global variance reduction is a bottleneck in Monte Carlo shielding calculations.The global variance reduction problem requires that the statistical error of the entire space is uniform.This study proposed a grid-AIS method for the global variance reduction problem based on the AIS method,which was implemented in the Monte Carlo program MCShield.The proposed method was validated using the VENUS-Ⅲ international benchmark problem and a self-shielding calculation example.The results from the VENUS-Ⅲ benchmark problem showed that the grid-AIS method achieved a significant reduction in the variance of the statistical errors of the MESH grids,decreasing from 1.08×10^(-2) to 3.84×10^(-3),representing a 64.00% reduction.This demonstrates that the grid-AIS method is effective in addressing global issues.The results of the selfshielding calculation demonstrate that the grid-AIS method produced accurate computational results.Moreover,the grid-AIS method exhibited a computational efficiency approximately one order of magnitude higher than that of the AIS method and approximately two orders of magnitude higher than that of the conventional Monte Carlo method.展开更多
The global energy-related CO_(2) emissions have rapidly increased as the world economy heavily relied on fossil fuels.This paper explores the pressing challenge of CO_(2) emissions and highlights the role of porous me...The global energy-related CO_(2) emissions have rapidly increased as the world economy heavily relied on fossil fuels.This paper explores the pressing challenge of CO_(2) emissions and highlights the role of porous metal oxide materials in the electrocatalytic reduction of CO_(2)(CO_(2)RR).The focus is on the development of robust and selective catalysts,particularly metal and metal-oxide-based materials.Porous metal oxides offer high surface area,enhancing the accessibility to active sites and improving reaction kinetics.The tunability of these materials allows for tailored catalytic behavior,targeting optimized reaction mechanisms for CO_(2)RR.The work also discusses the various synthesis strategies and identifies key structural and compositional features,addressing challenges like high overpotential,poor selectivity,and low stability.Based on these insights,we suggest avenues for future research on porous metal oxide materials for electrochemical CO_(2) reduction.展开更多
We report a novel double-shelled nanoboxes photocatalyst architecture with tailored interfaces that accelerate quantum efficiency for photocatalytic CO_(2) reduction reaction(CO_(2)RR)via Mo–S bridging bonds sites in...We report a novel double-shelled nanoboxes photocatalyst architecture with tailored interfaces that accelerate quantum efficiency for photocatalytic CO_(2) reduction reaction(CO_(2)RR)via Mo–S bridging bonds sites in S_(v)–In_(2)S_(3)@2H–MoTe_(2).The X-ray absorption near-edge structure shows that the formation of S_(v)–In_(2)S_(3)@2H–MoTe_(2) adjusts the coordination environment via interface engineering and forms Mo–S polarized sites at the interface.The interfacial dynamics and catalytic behavior are clearly revealed by ultrafast femtosecond transient absorption,time-resolved,and in situ diffuse reflectance–Infrared Fourier transform spectroscopy.A tunable electronic structure through steric interaction of Mo–S bridging bonds induces a 1.7-fold enhancement in S_(v)–In_(2)S_(3)@2H–MoTe_(2)(5)photogenerated carrier concentration relative to pristine S_(v)–In_(2)S_(3).Benefiting from lower carrier transport activation energy,an internal quantum efficiency of 94.01%at 380 nm was used for photocatalytic CO_(2)RR.This study proposes a new strategy to design photocatalyst through bridging sites to adjust the selectivity of photocatalytic CO_(2)RR.展开更多
Electrocatalytic nitrate reduction reaction has attracted increasing attention due to its goal of low carbon emission and environmental protection.Here,we report an efficient NitRR catalyst composed of single Mn sites...Electrocatalytic nitrate reduction reaction has attracted increasing attention due to its goal of low carbon emission and environmental protection.Here,we report an efficient NitRR catalyst composed of single Mn sites with atomically dispersed oxygen(O)coordination on bacterial cellulose-converted graphitic carbon(Mn-O-C).Evidence of the atomically dispersed Mn-(O-C_(2))_(4)moieties embedding in the exposed basal plane of carbon surface is confirmed by X-ray absorption spectroscopy.As a result,the as-synthesized Mn-O-C catalyst exhibits superior NitRR activity with an NH_(3)yield rate(RNH_(3))of 1476.9±62.6μg h^(−1)cm^(−2)at−0.7 V(vs.reversible hydrogen electrode,RHE)and a faradaic efficiency(FE)of 89.0±3.8%at−0.5 V(vs.RHE)under ambient conditions.Further,when evaluated with a practical flow cell,Mn-O-C shows a high RNH_(3)of 3706.7±552.0μg h^(−1)cm^(−2)at a current density of 100 mA cm−2,2.5 times of that in the H cell.The in situ FT-IR and Raman spectroscopic studies combined with theoretical calculations indicate that the Mn-(O-C_(2))_(4)sites not only effectively inhibit the competitive hydrogen evolution reaction,but also greatly promote the adsorption and activation of nitrate(NO_(3)^(−)),thus boosting both the FE and selectivity of NH_(3)over Mn-(O-C_(2))_(4)sites.展开更多
基金the financial support from the National Natural Science Foundation of China(No.22178307)China Southern Power Grid(Grant Nos.0470002022030103HX00002-01).
文摘The poor electronic conductivity of metal-organic framework(MOF)materials hinders their direct application in the field of electrocatalysis in fuel cells.Herein,we proposed a strategy of embedding carbon nanotubes(CNTs)during the growth process of MOF crystals,synthesizing a metalloporphyrin-based MOF catalyst TCPPCo-MOF-CNT with a unique CNT-intercalated MOF structure.Physical characterization revealed that the CNTs enhance the overall conductivity while retaining the original characteristics of the MOF and metalloporphyrin.Simultaneously,the insertion of CNTs generated adequate mesopores and created a hierarchical porous structure that enhances mass transfer efficiency.X-ray photoelectron spectroscopic analysis confirmed that the C atom in CNT changed the electron cloud density on the catalytic active center Co,optimizing the electronic structure.Consequently,the E1/2 of the TCPPCo-MOF-CNT catalyst under neutral conditions reached 0.77 V(vs.RHE),outperforming the catalyst without CNTs.When the TCPPCo-MOF-CNT was employed as the cathode catalyst in assembling microbial fuel cells(MFCs)with Nafion-117 as the proton exchange membrane,the maxi-mum power density of MFCs reached approximately 500 mW·m-2.
基金Supported by the Foundation for Innovative Research Groups of National Natural Science Foundation of China(52421002)General Program of National Natural Science Foundation of China(52474016).
文摘This paper investigates the macroscopic and microscopic characteristics of viscosity reduction and quality improvement of heavy oil in a supercritical water environment through laboratory experiments and testing.The effect of three reaction parameters,i.e.reaction temperature,reaction time and oil-water ratio,is analyzed on the product and their correlation with viscosity.The results show that the flow state of heavy oil is significantly improved with a viscosity reduction of 99.4%in average after the reaction in the supercritical water.Excessively high reaction temperature leads to a higher content of resins and asphaltenes,with significantly increasing production of coke.The optimal temperature ranges in 380–420℃.Prolonged reaction time could continuously increase the yield of light oil,but it will also results in the growth of resins and asphaltenes,with the optimal reaction time of 150 min.Reducing the oil-water ratio helps improve the diffusion environment within the reaction system and reduce the content of resins and asphaltenes,but it will increase the cost of heavy oil treatment.An oil-water ratio of 1︰2 is considered as optimum to balance the quality improvement,viscosity reduction and reaction economics.The correlation of the three reaction parameters relative to the oil sample viscosity is ranked as temperature,time and oil-water ratio.Among the four fractions of heavy oil,the viscosity is dominated by asphaltene content,followed by aromatic content and less affected by resins and saturates contents.
基金supported by the National Key R&D Program of China (2021YFF0500504)National Natural Science Foundation of China (No. 51976169)the financial supports from the Fundamental Research Funds for the Central Universities。
文摘The ability to unlock the interplay between the activity and stability of oxygen reduction reaction(ORR)represents an important endeavor toward creating robust ORR catalysts for efficient fuel cells.Herein,we report an effective strategy to concurrent enhance the activity and stability of ORR catalysts via constructing atomically dispersed Fe-Mn dualmetal sites on N-doped carbon(denoted(FeMn-DA)-N-C)for both anion-exchange membrane fuel cells(AEMFC)and proton exchange membrane fuel cells(PEMFC).The(FeMn-DA)-N-C catalysts possess ample dual-metal atoms consisting of adjacent Fe-N_(4)and Mn-N_(4)sites on the carbon surface,yielded via a facile doping-adsorption-pyrolysis route.The introduction of Mn carries several advantageous attributes:increasing the number of active sites,effectively anchoring Fe due to effective electron transfer to Mn(revealed by X-ray absorption spectroscopy and density-functional theory(DFT),thus preventing the aggregation of Fe),and effectively circumventing the occurrence of Fenton reaction,thus reducing the consumption of Fe.The(FeMn-DA)-N-C catalysts showcase half-wave potentials of 0.92 and 0.82 V in 0.1 M KOH and 0.1 M HClO_(4),respectively,as well as outstanding stability.As manifested by DFT calculations,the introduction of Mn affects the electronic structure of Fe,down-shifts the d-band Fe active center,accelerates the desorption of OH groups,and creates higher limiting potentials.The AEMFC and PEMFC with(FeMn-DA)-N-C as the cathode catalyst display high power densities of 1060 and 746 mW cm^(-2),respectively,underscoring their promising potential for practical applications.Our study highlights the robustness of designing Fe-containing dual-atom ORR catalysts to promote both activity and stability for energy conversion and storage materials and devices.
基金National Natural Science Foundation of China(grants 22072065,22178162,and 22222806)Distinguished Youth Foundation of Jiangsu Province(grant BK20220053)Six talent peaks project in Jiangsu Province(grant JNHB-035)。
文摘The synergy of single atoms(SAs)and nanoparticles(NPs)has demonstrated great potential in promoting the electrocatalytic carbon dioxide reduction reaction(CO_(2)RR);however,the rationalization of the SAs/NPs proportion remains one challenge for the catalyst design.Herein,a Ni2+-loaded porous poly(ionic liquids)(PIL)precursor synthesized through the free radical self-polymerization of the ionic liquid monomer,1-allyl-3-vinylimidazolium chloride,was pyrolyzed to prepare the Ni,N co-doped carbon materials,in which the proportion of Ni SAs and NPs could be facilely modulated by controlling the annealing temperature.The catalyst Ni-NC-1000 with a moderate proportion of Ni SAs and NPs exhibited high efficiency in the electrocatalytic conversion of CO_(2)into CO.Operando Ni K-edge X-ray absorption near-edge structure(XANES)spectra and theoretical calculations were conducted to gain insight into the synergy of Ni SAs and NPs.The charge transfer from Ni NPs to the surrounding carbon layer and then to the Ni SAs resulted in the electron-enriched Ni SAs active sites.In the electroreduction of CO_(2),the coexistence of Ni SAs and NPs strengthened the CO_(2)activation and the affinity towards the key intermediate of*COOH,lowering the free energy for the potential-determining*CO_(2)→*COOH step,and therefore promoted the catalysis efficiency.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 61971345 and 52107174)。
文摘The primary objective in aircraft transportation is to minimize turbulent drag, thereby conserving energy and reducing emissions. We propose a sector-shaped counter-flow dielectric barrier discharge plasma actuator, which leverages jet synthesis for drag reduction. A drag control experiment was conducted in a low-speed wind tunnel with a controlled flow velocity of 9.6 m/s(Re = 1.445 × 10^(4)). This study investigated the effects of varying pulse frequencies and actuation voltages on the turbulent boundary layer. Using a hot-wire measurement system, we analyzed the pulsating and time-averaged velocity distributions within the boundary layer to evaluate the streamwise turbulent drag reduction. The results show that the local TDR decreases as the pulse frequency increases, reaching a maximum reduction of approximately 20.97% at a pulse frequency of 50 Hz. In addition, as the actuation voltage increases, the friction coefficient decreases, increasing the drag reduction rate. The maximum drag reduction of approximately 33.34% is achieved at an actuation voltage of 10 kV.
基金National Natural Science Foundation of China (52371228, 52402045)fund of Key Laboratory of Advanced Materials of Ministry of Education(Advmat-2414)。
文摘Electrocatalytic nitrate reduction reaction (NO_(3)-RR) to ammonia under ambient conditions is expected to be a green process for ammonia synthesis and alleviate water pollution issues.We report a CuO nanoparticles incorporated on nitrogen-doped porous carbon (CuO@NC) catalyst for NO_(3)-RR.Part of Cu(Ⅱ) is reduced to Cu(Ⅰ) during the NO_(3)-RR process to construct Cu(Ⅰ)-Cu(Ⅱ) pairs,confirmed by in situ X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy.Density functional theory (DFT) calculations indicated that the formation of Cu(Ⅰ) could provide a reaction path with smaller energy barrier for NO_(3)-RR,while Cu(Ⅱ) effectively suppressed the competition of hydrogen evolution reaction (HER).As a result,CuO@NC catalyst achieved a Faradaic efficiency of 84.2% at -0.49 V versus reversible hydrogen electrode (RHE),and a NH_(3)yield rate of 17.2 mg h^(-1)mg^(-1)cat.at -0.79 V vs.RHE,higher than the HaberBosch process (<3.4 g h^(-1)g^(-1)cat.).This work may open a new avenue for effective NO_(3)-RR by modulating oxidation states.
基金financially supported by Youth Talent Support Programme of Guangdong Provincial Association for Science and Technology(SKXRC202317)the Open Project of Beijing Laboratory of Food Quality and Safety/Key Laboratory of Alcoholic Beverages Quality and Safety of China Light Industry(FQS-202201)+3 种基金Characteristic Innovation Project of Guangdong Universities(2022KTSCX058)Special Projects in Key Field of Guangdong Universities(2022ZDZX4015,2022ZDZX4016)Guangdong Maoming Binhai New Area Marine Fishery Industrial Park Project(0835-220FA8102621)Guangdong Provincial Key Laboratory of Lingnan Specialty Food Science and Technology(2021B1212040013)。
文摘Sodium chloride is one of the most widely used additives in meat curing.However,cured meat products contribute to a portion of the total sodium dietary intake.Consumers and researchers'concern about excessive sodium intake has prompted the food industry to consider ways to reduce salt content of cured meat products.The aim of this review is to provide a broad but comprehensive understanding of salt reduction strategies for cured meat products.The implications and limitations of each approach were discussed.Green technologies treatments,such as ultrasonic technology,high-pressure processing,seem to be potential to ensure microbiological safety in low-sodium cured meat products.However,these novel technologies can cause protein and fat oxidization in meat products.A combination of multiple treatments could give the desired effect.In addition,different parameter conditions need to be set according to the specific meat to achieve better salt reduction effect.
基金supported by Natural Science Foundation of Gansu Province(23JRRA745)the Fundamental Research Funds for the Central Universities(lzujbky2021-sp55).
文摘Converting CO_(2)and water into valuable chemicals like plant do is considered a promising approach to address both environmental and energy issues.Taking inspiration from the structures of natural leaves,we designed and synthesized a novel copper-coordinated covalent triazine framework(CuCTF)supported by silicon nanowire arrays on wafer chip.This marks the first-ever application of such a hybrid material in the photoelectrocatalytic reduction of CO_(2)under mild conditions.The Si@CuCTF6 heterojunction has exhibited exceptional selectivity of 95.6%towards multicarbon products(C_(2+))and apparent quantum efficiency(AQE)of 0.89%for carbon-based products.The active sites of the catalysts are derived from the nitrogen atoms of unique triazine ring structure in the ordered porous framework and the abundant Cu-N coordination sites with bipyridine units.Furthermore,through DFT calculations and operando FTIR spectra analysis,we proposed a comprehensive mechanism for the photoelectrocatalytic CO_(2)reduction,confirming the existence of key intermediate species such as*CO_(2)-,*=C=O,*CHO and*CO-CHO etc.This work not only provides a new way to mimic photosynthesis of plant leaves but also gives a new opportunity to enter this research field in the future.
基金supported by the National Natural Science Foundation of China(21832005,22072168,22002175)Major Program of the Lanzhou Institute of Chemical Physics,CAS(No.ZYFZFX-3)+1 种基金Major Science and Technology Projects in Gansu Province(22ZD6GA003)West Light Foundation of The Chinese Academy of Sciences(xbzg-zdsys-202209).
文摘Artificial carbon fixation is a promising pathway for achieving the carbon cycle and environment remediation.However,the sluggish kinetics of oxygen evolution reaction(OER)and poor selectivity of CO_(2) reduction seriously limited the overall conversion efficiencies of solar energy to chemical fuels.Herein,we demonstrated a facile and feasible strategy to rationally regulate the coordination environment and electronic structure of surface-active sites on both photoanode and cathode.More specifically,the defect engineering has been employed to reduce the coordination number of ultrathin FeNi catalysts decorated on BiVO4 photoanodes,resulting in one of the highest OER activities of 6.51 mA cm^(−2)(1.23 VRHE,AM 1.5G).Additionally,single-atom cobalt(II)phthalocyanine anchoring on the N-rich carbon substrates to increase Co–N coordination number remarkably promotes CO_(2) adsorption and activation for high selective CO production.Their integration achieved a record activity of 109.4μmol cm^(−2) h−1 for CO production with a faradaic efficiency of>90%,and an outstanding solar conversion efficiency of 5.41%has been achieved by further integrating a photovoltaic utilizing the sunlight(>500 nm).
基金supported by the National Natural Science Foundations of China(Nos:22271018,22309012 and 22302013)the NSF of Guangdong Province(Nos:2023A1515010554 and 2024A1515010307)。
文摘The oxygen reduction reaction(ORR)could be effectively regulated by adjusting electron configurations and optimizing chemical bonds.Herein,we have achieved the modulation of electron distribution in Fe single atomic(Fe_(SA))sites through Fe atomic clusters(Fe_(AC))via a confined pyrolysis approach,thereby enhancing their intrinsic ORR activity.X-ray absorption spectroscopy has confirmed that the presence of iron atomic dusters could influence the electron distribution at Fe-N_(4)sites.The Fe_(SA)/Fe_(AC)-NC catalyst exhibits a half-wave potential of 0.88 V,surpassing the individual Fe_(SA)-NC structure.Through electronic structure analysis,it could be seen that iron atom clusters can affect Fe-N_(4)sites through long-range effects,and then effectively lower reaction barriers and enhance the reaction kinetics at Fe-N_(4)sites.The synthetic approach might pave the way for constructing highly active catalysts with tunable atomic structures,representing an effective and universal technique for electron modulation in M-N-C systems.This work provides enlightenment for the exploration of more efficient single-atom electrocatalysts and the optimization of the performance of atomic electrocatalysts.Furthermore,a zinc-air battery assembled using it on their cathode deliver a high peak power density(205.7 mW cm^(-2))and a high-specific capacity of 807.5 mA h g^(-1).This study offers a fresh approach to effectively enhance the synergistic interaction of between Fe single atom and Fe atomic clusters for improving ORR activity and energy storage.
基金financially supported by the National Natural Science Foundation of China-Yunnan Joint Fund(U2002213)Science and Technology Talent and Platform Program of Yunnan Provincial Science and Technology Department(202305AM070001)+1 种基金the Xingdian Talent Program of Yunnan Provincethe Double-First Class University Plan(C176220100042).
文摘The recycling of CO_(2)through electrochemical processes offers a promising solution for alleviating the greenhouse effect;however,the activation of CO_(2)and desorption of^(*)CO in electrocatalytic CO_(2)reduction(ECR)frequently encounter high energy barriers and competitive hydrogen evolution reactions(HERs),which are urgent problems that need to be addressed.In this study,a catalyst(P100-Fe-N/C)with homogeneous P-tuned FeN_(2)binuclear sites(N_(2)PFe-FePN_(2))was successfully synthesised,demonstrating satisfactory performance in the ECR to CO.P100-Fe-N/C attains a peak FECOof 98.01%and a normalized TOF of 664.7 h-1at-0.7 VRHE,surpassing the performance of the Fe binuclear catalyst without P and singleatoms catalysts.In the MEA cell,a FECOexceeding 90%can still be achieved.Density functional theory analysis indicates that the asymmetric coordination configuration induced by the incorporation of P facilitates a reduction in the system's energy.The modulation of P results in the d-band centre of the catalyst being positioned closer to the Fermi level,which facilitates the interaction of the catalyst with CO_(2),allowing more electrons to be injected into the CO_(2)molecule at the Fe binuclear sites and inhibiting the HER.The P-tuned FeN_(2)binuclear sites effectively lower the^(*)CO desorption barrier.
基金financially supported by the National Natural Science Foundation of China(Grants 22225901,21975237 and 51702312)the Fundamental Research Funds for the Central Universities(Grant WK2340000101)+5 种基金the USTC Research Funds of the Double First-Class Initiative(Grant YD2340002007 and YD9990002017)the Open Funds of the State Key Laboratory of Rare Earth Resource Utilization(Grant RERU2022007)the China Postdoctoral Science Foundation(Grants 2023M733371,2024M750006 and 2023T160617)Postdoctoral Fellowship Program(Grade C)of China Postdoctoral Science Foundation(GZC20230008)the Natural Science Foundation Youth Project of Anhui Province(2408085QB065)the Postdoctoral Research Funding Project of Anhui Province(2023B727)。
文摘The electrochemical reduction of carbon dioxide(CO_(2))into value-added chemicals and fuels has been extensively studied as a promising strategy for mitigating environmental issues and achieving sustainable energy conversion.Substantial efforts have been made to improve the understanding of CO_(2)reduction reaction(CO_(2)RR)mechanisms by computational and spectroscopic studies.An in-depth understanding of CO_(2)RR mechanism can provide the guidance and criteria for designing high-efficiency catalysts,and hence,steering CO_(2)RR to desired products.This review systematically discusses the formation mechanisms and reaction pathways of various CO_(2)RR products,including C_(1)products(CO,HCOOH,and CH_(4)),C_(2)products(C_(2)H_(4),C_(2)H_(5)OH,and CH_(3)COOH),and C_(3+)products(C_(3)H_(6),C_(3)H_(7)OH,and others).The reaction pathways are elucidated by analyzing the adsorption behavior,energy barriers,and intermediate coupling steps involved in the generation of each product.Particular emphasis is placed on the key intermediates,such as^(*)OCHO,^(*)COOH,^(*)CO,^(*)OCCOH,and^(*)CCO,which play crucial roles in determining the product selectivity.The effects of catalyst composition,morphology,and electronic structure on the adsorption and activation of these intermediates are also discussed.Moreover,advanced characterization techniques,including in-situ spectroscopy and isotopic labeling experiments,are highlighted for their contributions to unraveling the reaction mechanisms.The review aims to provide critical insights to reveal the activity-determining para meters and underlying CO_(2)RR mechanisms,which will guide the rational design of next-generation electrocatalysts for selective CO^(2)RR towards high-value products.
基金supported by the National Natural Science Foundation of China(22222601 and 22076019)the Fundamental Research Funds for the Central Universities(DUT23LAB611).
文摘The Cu^(+)/Cu^(0)sites of copper-based catalysts are crucial for enhancing the production of multicarbon(C_(2+))products from electrochemical CO_(2)reduction reaction(eCO_(2)RR).However,the unstable Cu^(+)and insufficient Cu^(+)/Cu^(0)active sites lead to their limited selectivity and stability for C_(2+)production.Herein,we embedded copper oxide(CuO_(x))particles into porous nitrogen-doped carbon nanofibers(CuO_(x)@PCNF)by pyrolysis of the electrospun fiber film containing ZIF-8 and Cu_(2)O particles.The porous nitrogendoped carbon nanofibers protected and dispersed Cu^(+)species,and its micro porous structure enhanced the interaction between CuO_(x)and reactants during eCO_(2)RR.The obtained CuO_(x)@PCNF created more effective and stable Cu^(+)/Cu^(0)active sites.It showed a high Faradaic efficiency of 62.5%for C_(2+)products in Hcell,which was 2 times higher than that of bare CuO_(x)(~31.1%).Furthermore,it achieved a maximum Faradaic efficiency of 80.7%for C_(2+)products in flow cell.In situ characterization and density functional theory(DFT)calculation confirmed that the N-doped carbon layer protected Cu^(+)from electrochemical reduction and lowered the energy barrier for the dimerization of^(*)CO.Stable and exposed Cu^(+)/Cu^(0)active sites enhanced the enrichment of^(*)CO and promoted the C-C coupling reaction on the catalyst surface,which facilitated the formation of C_(2+)products.
基金Longyuan Youth Innovative and Entrepreneurial Talents ProjectProgram for Top Leading Talents of Gansu Province。
文摘Electrochemical reduction of NO_(2)-to NH_(3)(NO_(2)-RR) is recognized as an appealing approach for achieving renewable NH_(3)synthesis and waste NO_(2)-removal.Herein,we report isolated Bi alloyed Ru (Bi1Ru) as an efficient NO_(2)-RR catalyst.Theoretical calculations and in situ electrochemical measurements reveal the creation of Bi1-Ru dual sites which can remarkably promote NO_(2)-activation and suppress proton adsorption,while accelerating the NO_(2)-RR protonation energetics to render a high NO_(2)--to-NH_(3)conversion efficiency.Remarkably,Bi1Ru assembled in a flow cell delivers an NH_(3)yield rate of 1901.4μmol h^(-1)cm^(-2)and an NH_(3)-Faradaic efficiency of 94.3%at an industrial-level current density of 324.3 mA cm^(-2).This study offers new perspectives for designing and constructing p-block single-atom alloys as robust and high-current-density NO_(2)-RR catalysts toward the ammonia electrosynthesis.
基金supported by the National Natural Science Foundation of China(22234005,21974070)the Natural Science Foundation of Jiangsu Province(BK20222015)。
文摘Atomically dispersed catalysts exhibit significant influence on facilitating the sluggish oxygen reduction reaction(ORR)kinetics with high atom economy,owing to remarkable attributes including nearly 100%atomic utilization and exceptional catalytic functionality.Furthermore,accurately controlling atomic physical properties including spin,charge,orbital,and lattice degrees of atomically dispersed catalysts can realize the optimized chemical properties including maximum atom utilization efficiency,homogenous active centers,and satisfactory catalytic performance,but remains elusive.Here,through physical and chemical insight,we review and systematically summarize the strategies to optimize atomically dispersed ORR catalysts including adjusting the atomic coordination environment,adjacent electronic orbital and site density,and the choice of dual-atom sites.Then the emphasis is on the fundamental understanding of the correlation between the physical property and the catalytic behavior for atomically dispersed catalysts.Finally,an overview of the existing challenges and prospects to illustrate the current obstacles and potential opportunities for the advancement of atomically dispersed catalysts in the realm of electrocatalytic reactions is offered.
基金supported by the National Natural Science Foundation of China (22178149)Jiangsu Distinguished Professor Program+4 种基金Natural Science Foundation of Jiangsu Province for Outstanding Youth Scientists (BK20211599)Key R and D Project of Zhenjiang City (CQ2022001)Scientific Research Startup Foundation of Jiangsu University (Nos. 202096 and 22JDG020)Open Project Program of the State Key Laboratory of Photocatalysis on Energy and Environment of Fuzhou University (SKLPEE-KF202310)the Opening Project of Structural Optimization and Application of Functional Molecules Key Laboratory of Sichuan Province (2023GNFZ-01)。
文摘Carbon dioxide conversion into valuable products using photocatalysis and electrocatalysis is an effective approach to mitigate global environmental issues and the energy shortages. Among the materials utilized for catalytic reduction of CO_(2), Cu-based materials are highly advantageous owing to their widespread availability, cost-effectiveness, and environmental sustainability. Furthermore, Cu-based materials demonstrate interesting abilities in the adsorption and activation of carbon dioxide, allowing the formation of C_(2+) compounds through C–C coupling process. Herein, the basic principles of photocatalytic CO_(2) reduction reactions(PCO_(2)RR) and electrocatalytic CO_(2) reduction reaction(ECO_(2)RR) and the pathways for the generation C_(2+) products are introduced. This review categorizes Cu-based materials into different groups including Cu metal, Cu oxides, Cu alloys, and Cu SACs, Cu heterojunctions based on their catalytic applications. The relationship between the Cu surfaces and their efficiency in both PCO_(2)RR and ECO_(2)RR is emphasized. Through a review of recent studies on PCO_(2)RR and ECO_(2)RR using Cu-based catalysts, the focus is on understanding the underlying reasons for the enhanced selectivity toward C_(2+) products. Finally, the opportunities and challenges associated with Cu-based materials in the CO_(2) catalytic reduction applications are presented, along with research directions that can guide for the design of highly active and selective Cu-based materials for CO_(2) reduction processes in the future.
基金supported by the Platform Development Foundation of the China Institute for Radiation Protection(No.YP21030101)the National Natural Science Foundation of China(General Program)(Nos.12175114,U2167209)+1 种基金the National Key R&D Program of China(No.2021YFF0603600)the Tsinghua University Initiative Scientific Research Program(No.20211080081).
文摘Global variance reduction is a bottleneck in Monte Carlo shielding calculations.The global variance reduction problem requires that the statistical error of the entire space is uniform.This study proposed a grid-AIS method for the global variance reduction problem based on the AIS method,which was implemented in the Monte Carlo program MCShield.The proposed method was validated using the VENUS-Ⅲ international benchmark problem and a self-shielding calculation example.The results from the VENUS-Ⅲ benchmark problem showed that the grid-AIS method achieved a significant reduction in the variance of the statistical errors of the MESH grids,decreasing from 1.08×10^(-2) to 3.84×10^(-3),representing a 64.00% reduction.This demonstrates that the grid-AIS method is effective in addressing global issues.The results of the selfshielding calculation demonstrate that the grid-AIS method produced accurate computational results.Moreover,the grid-AIS method exhibited a computational efficiency approximately one order of magnitude higher than that of the AIS method and approximately two orders of magnitude higher than that of the conventional Monte Carlo method.
基金funded by the National Natural Science Foundation of China,China (Nos.52272303 and 52073212)the General Program of Municipal Natural Science Foundation of Tianjin,China (Nos.17JCYBJC22700 and 17JCYBJC17000)the State Scholarship Fund of China Scholarship Council,China (Nos.201709345012 and 201706255009)。
文摘The global energy-related CO_(2) emissions have rapidly increased as the world economy heavily relied on fossil fuels.This paper explores the pressing challenge of CO_(2) emissions and highlights the role of porous metal oxide materials in the electrocatalytic reduction of CO_(2)(CO_(2)RR).The focus is on the development of robust and selective catalysts,particularly metal and metal-oxide-based materials.Porous metal oxides offer high surface area,enhancing the accessibility to active sites and improving reaction kinetics.The tunability of these materials allows for tailored catalytic behavior,targeting optimized reaction mechanisms for CO_(2)RR.The work also discusses the various synthesis strategies and identifies key structural and compositional features,addressing challenges like high overpotential,poor selectivity,and low stability.Based on these insights,we suggest avenues for future research on porous metal oxide materials for electrochemical CO_(2) reduction.
基金the Natural Science Foundation of China(11922415,12274471)Guangdong Basic and Applied Basic Research Foundation(2022A1515011168,2019A1515011718,2019A1515011337)the Key Research and Development Program of Guangdong Province,China(2019B110209003).
文摘We report a novel double-shelled nanoboxes photocatalyst architecture with tailored interfaces that accelerate quantum efficiency for photocatalytic CO_(2) reduction reaction(CO_(2)RR)via Mo–S bridging bonds sites in S_(v)–In_(2)S_(3)@2H–MoTe_(2).The X-ray absorption near-edge structure shows that the formation of S_(v)–In_(2)S_(3)@2H–MoTe_(2) adjusts the coordination environment via interface engineering and forms Mo–S polarized sites at the interface.The interfacial dynamics and catalytic behavior are clearly revealed by ultrafast femtosecond transient absorption,time-resolved,and in situ diffuse reflectance–Infrared Fourier transform spectroscopy.A tunable electronic structure through steric interaction of Mo–S bridging bonds induces a 1.7-fold enhancement in S_(v)–In_(2)S_(3)@2H–MoTe_(2)(5)photogenerated carrier concentration relative to pristine S_(v)–In_(2)S_(3).Benefiting from lower carrier transport activation energy,an internal quantum efficiency of 94.01%at 380 nm was used for photocatalytic CO_(2)RR.This study proposes a new strategy to design photocatalyst through bridging sites to adjust the selectivity of photocatalytic CO_(2)RR.
基金the financial support from the Natural Science Foundation of China(Grant No.52172106)Anhui Provincial Natural Science Foundation(Grant Nos.2108085QB60 and 2108085QB61)China Postdoctoral Science Foundation(Grant Nos.2020M682057 and 2023T160651).
文摘Electrocatalytic nitrate reduction reaction has attracted increasing attention due to its goal of low carbon emission and environmental protection.Here,we report an efficient NitRR catalyst composed of single Mn sites with atomically dispersed oxygen(O)coordination on bacterial cellulose-converted graphitic carbon(Mn-O-C).Evidence of the atomically dispersed Mn-(O-C_(2))_(4)moieties embedding in the exposed basal plane of carbon surface is confirmed by X-ray absorption spectroscopy.As a result,the as-synthesized Mn-O-C catalyst exhibits superior NitRR activity with an NH_(3)yield rate(RNH_(3))of 1476.9±62.6μg h^(−1)cm^(−2)at−0.7 V(vs.reversible hydrogen electrode,RHE)and a faradaic efficiency(FE)of 89.0±3.8%at−0.5 V(vs.RHE)under ambient conditions.Further,when evaluated with a practical flow cell,Mn-O-C shows a high RNH_(3)of 3706.7±552.0μg h^(−1)cm^(−2)at a current density of 100 mA cm−2,2.5 times of that in the H cell.The in situ FT-IR and Raman spectroscopic studies combined with theoretical calculations indicate that the Mn-(O-C_(2))_(4)sites not only effectively inhibit the competitive hydrogen evolution reaction,but also greatly promote the adsorption and activation of nitrate(NO_(3)^(−)),thus boosting both the FE and selectivity of NH_(3)over Mn-(O-C_(2))_(4)sites.
