In this paper,a dual-band graphene-based frequency selective surface(GFSS)is investigated and the operating mechanism of this GFSS is analyzed.By adjusting the bias voltage to control the graphene chemical po-tential ...In this paper,a dual-band graphene-based frequency selective surface(GFSS)is investigated and the operating mechanism of this GFSS is analyzed.By adjusting the bias voltage to control the graphene chemical po-tential between 0 eV and 0.5 eV,the GFSS can achieve four working states:dual-band passband,high-pass lowimpedance,low-pass high-impedance,and band-stop.Based on this GFSS,a hexagonal radome on a broadband omnidirectional monopole antenna is proposed,which can achieve independent 360°six-beam omnidirectional scanning at 1.08 THz and 1.58 THz dual bands.In addition,while increasing the directionality,the peak gains of the dual bands reach 7.44 dBi and 6.67 dBi,respectively.This work provides a simple method for realizing multi-band terahertz multi-beam reconfigurable antennas.展开更多
In,this paper, we propose a new antenna diversity scheme for OFDM-based wireless communication and digital broadcasting applications. Compared with existing schemes, such as post-fast Fourier transform （FFT）, pre-FF...In,this paper, we propose a new antenna diversity scheme for OFDM-based wireless communication and digital broadcasting applications. Compared with existing schemes, such as post-fast Fourier transform （FFT）, pre-FFT, and polyphase-based fitter-bank, the proposed scheme performs optimally and has very low computational complexity. It offers a better compromise between performance, power consumption, and complexity in real-time implementation of the receivers of broadband communication and digital broadcasting systems.展开更多
A dipole antenna with wideband characteristics is presented. The proposed antenna consists of a dipole with periodic capacitive loading and a pair of coplanar striplines （CPSs） as an impedance transformer. By adding...A dipole antenna with wideband characteristics is presented. The proposed antenna consists of a dipole with periodic capacitive loading and a pair of coplanar striplines （CPSs） as an impedance transformer. By adding interlaced coupling lines at each section, periodic capacitive loading is realized. The periodic interlaced coupling lines divide each arm of the dipole into five sections, and currents are distributed on different sections at different frequencies, which is useful to achieve a wide impedance bandwidth. By parametric study using HFSS, the optimized parameters of this dipole antenna are obtained. In order to validate the simulation results, a prototype of the proposed dipole antenna is fabricated and tested. The results show that the proposed antenna can achieve a gain of 3.1 dB–5.1 dB and bandwidth of 51% for ｜S 11 ｜ 10 dB over the band of 3.9 GHz–6.6 GHz, indicating its good radiation performance and radiation efficiency.展开更多
For spaceborne multi-beam antennas(MBAs), time division multiplexed switching(TDMS) based calibration receiver can reduce implementation costs effectively and is very suitable for large-scale applications. However, in...For spaceborne multi-beam antennas(MBAs), time division multiplexed switching(TDMS) based calibration receiver can reduce implementation costs effectively and is very suitable for large-scale applications. However, in practice, random phase noise imposed by noisy local oscillators can cause significant performance degradation in TDMS-based calibration systems. Characterization of phase noise effects is therefore crucial for practical applications. In this paper, we analyze the impact of phase noise on the calibration performance for a MBA system. Specifically, we derive the relationship between the probability of correct amplitude/phase estimation and various practical factors involving the signal-to-noise ratio(SNR), the standard deviation of phase noise, the given tolerance region, and the length of the spreading code. The results provide high efficiency for evaluating the calibration performance of the MBAs based on TDMS, especially for precisely anticipating the impact of phase noise. Finally, the accuracy of the derived results is assessed by simulations in different scenarios.展开更多
This paper focuses on the design and implementation of an active multibeam antenna system for massive MIMO applications in 5G wireless communications.The highly integrated active multibeam antenna system is designed a...This paper focuses on the design and implementation of an active multibeam antenna system for massive MIMO applications in 5G wireless communications.The highly integrated active multibeam antenna system is designed and implemented at 5.8 GHz with 64 RF Channels and 256 antenna elements.The 64-channel highly integrated active multibeam antenna system provides a verification platform for digital beamforming algorithm and massive MIMO channel estimation for next generation wireless communications.展开更多
With the rapid development of mobile communication technology and the explosion of data traffic,high capacity communication with high data transmission rate is urgently needed in densely populated areas.Since multibea...With the rapid development of mobile communication technology and the explosion of data traffic,high capacity communication with high data transmission rate is urgently needed in densely populated areas.Since multibeam antennas are able to increase the communication capacity and support a high data transmission rate,they have attracted a lot of research interest and have been actively investigated for base station applications.In addition,since multi-beam antennas based on Butler matrix(MABBMs)have the advantages of high gain,easy design and low profile,they are suitable for base station applications.The purposes of this paper is to provide an overview of the existing MABBMs.The specifications,principles of operation,design method and implementation of MABBMs are presented.The challenge of MABBMs for 3G/LTE/5G/B5G base station applications is discussed in the end.展开更多
According to the algorithm of the fuze antenna beamforming and the requirement for the realtime performenee, a fuze antenna beamformer based on digital signal processor （DSP） was designed. The program was written in...According to the algorithm of the fuze antenna beamforming and the requirement for the realtime performenee, a fuze antenna beamformer based on digital signal processor （DSP） was designed. The program was written in C, and in order to reduce the operation time of DSP, the key part of the matrix operation was written in simple algorithm. The precise and speediness of DSP calculation results were analyzed through Matlab and the Profiling tools in Code Composer Studio （CCS）. The results show that the precise and the speediness both can satisfy the requirement for the fuze antennh beamforming.展开更多
基金Supported by the Natural Science Foundation of Tibet Autonomous Region(XZ202401ZR0025)the National Natural Science Founda-tion of China(62164011,62301081)the Natural Science Foundation of Shaanxi Province(2022JQ-589)。
文摘In this paper,a dual-band graphene-based frequency selective surface(GFSS)is investigated and the operating mechanism of this GFSS is analyzed.By adjusting the bias voltage to control the graphene chemical po-tential between 0 eV and 0.5 eV,the GFSS can achieve four working states:dual-band passband,high-pass lowimpedance,low-pass high-impedance,and band-stop.Based on this GFSS,a hexagonal radome on a broadband omnidirectional monopole antenna is proposed,which can achieve independent 360°six-beam omnidirectional scanning at 1.08 THz and 1.58 THz dual bands.In addition,while increasing the directionality,the peak gains of the dual bands reach 7.44 dBi and 6.67 dBi,respectively.This work provides a simple method for realizing multi-band terahertz multi-beam reconfigurable antennas.
文摘In,this paper, we propose a new antenna diversity scheme for OFDM-based wireless communication and digital broadcasting applications. Compared with existing schemes, such as post-fast Fourier transform （FFT）, pre-FFT, and polyphase-based fitter-bank, the proposed scheme performs optimally and has very low computational complexity. It offers a better compromise between performance, power consumption, and complexity in real-time implementation of the receivers of broadband communication and digital broadcasting systems.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 61172115 and 60872029)the High-Tech Research and Development Program of China (Grant No. 2008AA01Z206)the Aeronautics Foundation of China (Grant No. 20100180003)
文摘A dipole antenna with wideband characteristics is presented. The proposed antenna consists of a dipole with periodic capacitive loading and a pair of coplanar striplines （CPSs） as an impedance transformer. By adding interlaced coupling lines at each section, periodic capacitive loading is realized. The periodic interlaced coupling lines divide each arm of the dipole into five sections, and currents are distributed on different sections at different frequencies, which is useful to achieve a wide impedance bandwidth. By parametric study using HFSS, the optimized parameters of this dipole antenna are obtained. In order to validate the simulation results, a prototype of the proposed dipole antenna is fabricated and tested. The results show that the proposed antenna can achieve a gain of 3.1 dB–5.1 dB and bandwidth of 51% for ｜S 11 ｜ 10 dB over the band of 3.9 GHz–6.6 GHz, indicating its good radiation performance and radiation efficiency.
基金supported by the NSFC(Joint Foundation of NSFC&Fundamental Research for General Purpose Technologies)under Grant U1636125
文摘For spaceborne multi-beam antennas(MBAs), time division multiplexed switching(TDMS) based calibration receiver can reduce implementation costs effectively and is very suitable for large-scale applications. However, in practice, random phase noise imposed by noisy local oscillators can cause significant performance degradation in TDMS-based calibration systems. Characterization of phase noise effects is therefore crucial for practical applications. In this paper, we analyze the impact of phase noise on the calibration performance for a MBA system. Specifically, we derive the relationship between the probability of correct amplitude/phase estimation and various practical factors involving the signal-to-noise ratio(SNR), the standard deviation of phase noise, the given tolerance region, and the length of the spreading code. The results provide high efficiency for evaluating the calibration performance of the MBAs based on TDMS, especially for precisely anticipating the impact of phase noise. Finally, the accuracy of the derived results is assessed by simulations in different scenarios.
文摘This paper focuses on the design and implementation of an active multibeam antenna system for massive MIMO applications in 5G wireless communications.The highly integrated active multibeam antenna system is designed and implemented at 5.8 GHz with 64 RF Channels and 256 antenna elements.The 64-channel highly integrated active multibeam antenna system provides a verification platform for digital beamforming algorithm and massive MIMO channel estimation for next generation wireless communications.
文摘With the rapid development of mobile communication technology and the explosion of data traffic,high capacity communication with high data transmission rate is urgently needed in densely populated areas.Since multibeam antennas are able to increase the communication capacity and support a high data transmission rate,they have attracted a lot of research interest and have been actively investigated for base station applications.In addition,since multi-beam antennas based on Butler matrix(MABBMs)have the advantages of high gain,easy design and low profile,they are suitable for base station applications.The purposes of this paper is to provide an overview of the existing MABBMs.The specifications,principles of operation,design method and implementation of MABBMs are presented.The challenge of MABBMs for 3G/LTE/5G/B5G base station applications is discussed in the end.
基金the Ministerial Level Advanced Research Foundation(51204BQ01)
文摘According to the algorithm of the fuze antenna beamforming and the requirement for the realtime performenee, a fuze antenna beamformer based on digital signal processor （DSP） was designed. The program was written in C, and in order to reduce the operation time of DSP, the key part of the matrix operation was written in simple algorithm. The precise and speediness of DSP calculation results were analyzed through Matlab and the Profiling tools in Code Composer Studio （CCS）. The results show that the precise and the speediness both can satisfy the requirement for the fuze antennh beamforming.
