Reversible solid oxide cell(RSOC)is a new energy conversion device with significant applications,especially for power grid peaking shaving.However,the reversible conversion process of power generation/energy storage p...Reversible solid oxide cell(RSOC)is a new energy conversion device with significant applications,especially for power grid peaking shaving.However,the reversible conversion process of power generation/energy storage poses challenges for the performance and stability of air electrodes.In this work,a novel high-entropy perovskite oxide La_(0.2)Pr_(0.2)Gd_(0.2)Sm_(0.2)Sr_(0.2)Co_(0.8)Fe_(0.2)O_(3−δ)(HE-LSCF)is proposed and investigated as an air electrode in RSOC.The electrochemical behavior of HE-LSCF was studied as an air electrode in both fuel cell and electrolysis modes.The polarization impedance(Rp)of the HE-LSCF electrode is only 0.25Ω·cm^(2) at 800℃ in an air atmosphere.Notably,at an electrolytic voltage of 2 V and a temperature of 800℃,the current density reaches up to 1.68 A/cm^(2).The HE-LSCF air electrode exhibited excellent reversibility and stability,and its electrochemical performance remains stable after 100 h of reversible operation.With these advantages,HE-LSCF is shown to be an excellent air electrode for RSOC.展开更多
The effect of hydroxamic acid starch (HAS) and hydroxamic acid polyacrylamide (HPAM) on the flotation of diaspore and kaolinite was investigated by flotation test. It is found that HAS depresses diaspore but activates...The effect of hydroxamic acid starch (HAS) and hydroxamic acid polyacrylamide (HPAM) on the flotation of diaspore and kaolinite was investigated by flotation test. It is found that HAS depresses diaspore but activates kaolinite in acidic pulp,while HPAM activates both diaspore and kaolinite in the pH range of 2.010.5. The measurement of zeta potential shows that both HAS and HPAM can increase zeta potential of negatively charged diaspore, which indicates the existence of chemical bonding or hydrogen bonding between the reagents and diaspore. By covering the collector dodecyl amine(DDA) on diaspore surface,HAS increases the hydrophilicity of minerals and depresses the flotation of diaspore,however HPAM activates the flotation of diaspore by increasing the adsorption of DDA on diaspore surface.展开更多
Full scale experimental study on nitrogen removal for low-carbon wastewater was conducted in reversed A2/O process in Jiguanshi waste water treatment plant in Chongqing,in order to aid the operation and maintenance of...Full scale experimental study on nitrogen removal for low-carbon wastewater was conducted in reversed A2/O process in Jiguanshi waste water treatment plant in Chongqing,in order to aid the operation and maintenance of similar WWTP. When the proposed measures,such as using 0.1% (volume fraction of wastewater) landfill leachate,shortening HRT by 2/3 in the primary sedimentation tank and controlling DO at 0.5 mg/L in the 3rd section of aerobic zone,are applied,15% of the carbon source can be complemented,the favorable property of activated sludge is achieved,and the nitrogen removal effect is significantly improved. The effluent NH3-N is 2 mg/L and the removal rate is 90%. The effluent TN is 17 mg/L and the removal rate is 54%. The up-to-standard discharge of the effluent is achieved. And after the optimization,the unit electricity consumption also reaches 0.21 kW/h and saves 20%.展开更多
Feature extraction is an important part of signal processing,which is significant for signal detection,classification,and recognition.The nonlinear dynamic analysis method can extract the nonlinear characteristics of ...Feature extraction is an important part of signal processing,which is significant for signal detection,classification,and recognition.The nonlinear dynamic analysis method can extract the nonlinear characteristics of signals and is widely used in different fields.Reverse dispersion entropy(RDE)proposed by us recently,as a nonlinear dynamic analysis method,has the advantages of fast computing speed and strong anti-noise ability,which is more suitable for measuring the complexity of signal than traditional permutation entropy(PE)and dispersion entropy(DE).Empirical wavelet transform(EWT),based on the theory of wavelet analysis,can decompose a complex non-stationary signal into a number of empirical wavelet functions(EWFs)with compact support set spectrum,which has better decomposition performance than empirical mode decomposition(EMD)and its improved algorithms.Considering the advantages of RDE and EWT,on the one hand,we introduce EWT into the field of underwater acoustic signal processing and fault diagnosis to improve the signal decomposition accuracy;on the other hand,we use RDE as the features of EWFs to improve the signal separability and stability.Finally,we propose a novel signal feature extraction technology based on EWT and RDE in this paper.Experimental results show that the proposed feature extraction technology can effectively extract the complexity features of actual signals.Moreover,it also has higher distinguishing ability for different types of signals than five latest feature extraction technologies.展开更多
Ni nanoparticles plating was prepared in reverse microemulsion. The deposition was carried out through the Brownian motion of water pools in the reverse microemulsion and the adsorption of water pools on the electrode...Ni nanoparticles plating was prepared in reverse microemulsion. The deposition was carried out through the Brownian motion of water pools in the reverse microemulsion and the adsorption of water pools on the electrode surface. Effects of electrolytic parameters on the size of Ni particles were studied. The performances of hydrogen evolution and hydrogen storage of the Ni nanoparticles plating electrode were also investigated. The results indicate that the size of Ni nanoparticles decreases with the increase of Ni2+ concentration and the decrease of current density. The electrochemical activity of Ni nanoparticles plating electrode is much higher than that of bulk Ni electrode.展开更多
Utilizing the technique of electrolysis with reverse current,sodium tungsten bronze (Na_xWO_3) crystals were prepared from a molten mixture of sodium tungstate (Na_2WO_4 ) and tungstic trioxide (WO_3) at 800℃. Crys...Utilizing the technique of electrolysis with reverse current,sodium tungsten bronze (Na_xWO_3) crystals were prepared from a molten mixture of sodium tungstate (Na_2WO_4 ) and tungstic trioxide (WO_3) at 800℃. Crystal structure, lattice parameter, and s展开更多
In this paper, we investigate the precursors of large earthquakes in the eastern region of Taiwan by means of the reverse tracing of precursors. We discuss the parameters which are suitable for the seismic chains and ...In this paper, we investigate the precursors of large earthquakes in the eastern region of Taiwan by means of the reverse tracing of precursors. We discuss the parameters which are suitable for the seismic chains and intermedi- ate-term patterns in this region and obtain the threshold of the patterns. Applying the linear discriminate method to the intermediate-term patterns of seismic chains, we present an approach for exploring the precursors of large earthquakes. The results show that this method can reduce the false alarm rate for large earthquakes in this region, and the reverse tracing of precursors can be applied to the eastern region of Taiwan.展开更多
The Influence of pulp pH, dispersants and auxiliary collectors on reverse flotation of carbonate-containing iron ores were explored. Interactions between iron ores and quartz were theoretically analyzed by flotation s...The Influence of pulp pH, dispersants and auxiliary collectors on reverse flotation of carbonate-containing iron ores were explored. Interactions between iron ores and quartz were theoretically analyzed by flotation solution chemistry and DLVO theory. The results indicated that the iron concentrate grade improved sharply when pH increased from 11.0 to 12.0, but changed unobviously when pH was larger than 12.0, which was related to solution chemistry of siderite and interactions among particles. Sodium tripolyphosphate was an effective dispersant and sodium dodecyl sulfate was an effective auxiliary collector of KS-III. Both recovery and grade enhanced by the action of sodium dodecyl sulfate or sodium tripolyphosphate when pH was 12.0.展开更多
Computer-integrated manufacturing (CIM) and revers e engineering (RE) have changed drastically the concept of product re-design, pla nning and manufacture of components. However, the main problems currently facing the...Computer-integrated manufacturing (CIM) and revers e engineering (RE) have changed drastically the concept of product re-design, pla nning and manufacture of components. However, the main problems currently facing the developers of reverse engineering system, is the time consuming digitis ation of 3D data and the conversion of large amounts of data into a concise and manageable format and linking it to a CAD/CAM system. Automated 3-D profile gen eration, measurements and inspection of manufactured component represents one of the important functions in reverse engineering and in the improvements in produ ct quality in rapid product developments. The paper presents a novel methodology for the development of a reverse enginee ring technique for use in the rapid product development in a CIM environment . The system developed provides integration, data capture and manipulation, dat a transfer between a CAD, CAM, Computer-aided inspection (CAI) and a 3-D profi le scanning system. An efficient scanning strategy has been developed for scann ing and surfaces data acquisition. The products were scanned using a laser scann ing system with a dedicated scan control card and the associated software packag es. A versatile rig was developed for the ease of data gathering of the profile scanning process. The surface data collected was then used to build a mathematic al surface model, which was then used to develop a virtual 3-D model of the pro duct. The resulting surface model provides the geometrical input to the subseque nt machining operation using either a CNC system or other manufacturing operatio n e.g. dies casting/mould casting etc. The prototypes developed were inspected u sing a state-of-the art CNC-CMM that was integrated to the CAD/CAM system. Si nce the scanning/digitised data captured by laser scanning probes requires no ma nual editing, significant time saving over most non-contact probe systems was a chieved. Since the creation of an accurate CAD model of a redesigned component o r a prototype constitute a major element of the total turnaround time; maximum r eturn can be achieved by increasing the efficiency of the redesigning process. T he paper also outlines with a case study the application of the developed system . The system developed offers the flexibility of using the concept of reverse en gineering of a variety of components with the complimentary facility of integrat ion between CAD/CAM Computer-aided Inspection (CAI) systems and a scanning syst em. The developed reverse engineering application in an integrated manufacturing system can increase the consistency, improve cost-efficiency, reduce produ ct turn around and skill levels required to redesign, reengineer and prototyping components and products.展开更多
An environment friendly bio-surfactant of rhamnolipid(RL) was used as a solvent. The enzymatic reaction of oleic acid catalyzed by lipase and lignin peroxidase(lip) was evaluated. The optimum conditions of enzymatic r...An environment friendly bio-surfactant of rhamnolipid(RL) was used as a solvent. The enzymatic reaction of oleic acid catalyzed by lipase and lignin peroxidase(lip) was evaluated. The optimum conditions of enzymatic reaction catalyzed by lipase(lip) were water to amphiphile molar ratio of 30(20), RL of 60(60) critical micelle concentration(CMC), pH of 7.0(3.0) and temperature of 40(30) °C, respectively. The change of enzyme conformation indicates that, for catalytic of lipase, water content is the most important factor of the enzymatic reaction of oleic acid, and p H for lip. With individual optimum conditions, the enzymatic efficiency of oleic acid catalyzed by lipase is higher than that by lip. In the presence of ethanol, the enzymatic reaction of oleic acid catalyzed by lipase suits Ping-Pong Bi-Bi mechanism. As an alternative to chemical reversed micelles, the RL reversed micelles are promising methods to enzymatic reaction of oleic acid.展开更多
In this paper,a series of new techniques are used to optimize typical laser scanning sensor.The integrated prototype is compared with traditional approach to demonstrate the much improved performance.In the research a...In this paper,a series of new techniques are used to optimize typical laser scanning sensor.The integrated prototype is compared with traditional approach to demonstrate the much improved performance.In the research and development,camera calibration is achieved by extracting characteristic points of the laser plane,so that the calibra- tion efficiency is improved significantly.With feedback control of its intensity,the laser is automatically adjusted for different material.A modified algorithm is presented to improve the accuracy of laser stripe extraction.The fusion of data extracted from left and right camera is completed with re-sampling technique.The scanner is integrated with a robot arm and some other machinery for on-line measurement and inspection,which provides a flexible measurement tool for reverse engineering.展开更多
Ni/n-SiO2 composite coating was electrodeposited by brush-plating with pulse-reverse current（RC）. The morphology, hardness, and tribological properties of the coating were investigated and compared with those of Ni ...Ni/n-SiO2 composite coating was electrodeposited by brush-plating with pulse-reverse current（RC）. The morphology, hardness, and tribological properties of the coating were investigated and compared with those of Ni and composite coatings electrodeposited with direct current（DC）. The results indicate that Ni/n-SiO2 composite coating electrodeposited by RC, because of RC and the nano powders, has denser coating, finer crystal grains, higher hardness（HV650.0, nearly 1.5 times higher than that of Ni coating electrodeposited by DC） and lower friction coefficient（nearly 0.62）, as a result, in the wearing experiment, the Ni/n-SiO2 composite coating electrodeposited by RC has the least worn loss. So this kind of coating has better wear resistance. And RC electro brush-plating can be used as a new technology of brush-plating in the area of wear resistance.展开更多
The electro-polymerization behavior of aniline in reverse(W/O) microemulsion was investigated. The experiment results show that the cyclic voltammetry polymerization behavior of aniline in W/O microemulsion is differe...The electro-polymerization behavior of aniline in reverse(W/O) microemulsion was investigated. The experiment results show that the cyclic voltammetry polymerization behavior of aniline in W/O microemulsion is different from that in aqueous solution remarkably. With the increase of scan cycle, the oxidation potential shifts positively and the reduction potential shifts negatively, i.e., the redox potential difference increases. H+ apparent concentration affects the aniline polymerization evidently. When H+ concentration is lower than 0.08 mol/L, the electro-polymerization of aniline is difficult. With the increase of H+ concentration, the polymerization current of aniline increases gradually. Only when H+ concentration is high enough(0.5 mol/L), aniline can be well electro-polymerized. Moreover, under the same condition, the aniline polymerization current in W/O microemulsion is higher than that in aqueous solution. The scanning electron microscopy image shows that the deposited polyaniline(PANI) has uniform fiber morphology with diameter of about 100 nm. Further study result suggests that the electrochemical activity of the PANI in HCl is similar to that of the PANI prepared in aqueous solution.展开更多
α-Hederagenin(H),derived from Hedera nepalensis var.sinensis,is a pentacyclic oleane-type triterpenoid that exhibits clear cytotoxicity to different tumor cell lines.In this study,a series of novel C-28 derivatives o...α-Hederagenin(H),derived from Hedera nepalensis var.sinensis,is a pentacyclic oleane-type triterpenoid that exhibits clear cytotoxicity to different tumor cell lines.In this study,a series of novel C-28 derivatives of hederagenin(H) were designed and synthesized in attempt to develop potent tumor resistance reverse activities agents.Previous research showed that H6 displayed robust reverse activity for paclitaxel resistance in KBV cells.Importantly,Co-treatment of paclitaxel with H6 significantly reduced the tumor weight to 42%.Pleasingly,H6 enhanced the efficacy of paclitaxel against KBV cancer cell-derived xenograft tumors in nude mice.Mechanism studies had found that H6 activated permeability glycoprotein(P-gp) ATPase,reduced intracellular ATP levels and inhibited efflux of P-gp substrates,thus enhancing the antitumor activity of paclitaxel on KBV cells.Molecular docking analysis of homology P-gp and H6 then conducted using the Surflex-Dock module.H6 showed a high binding affinity docking score with a total score of 5.4148,much higher than that of H(0.1414).The nov.el C-28 derivatives of H was synthesized from H6 via three-step reaction.The reversal activity of all synthesized H derivatives were tested using the MTT assay.The results showed that the derivatives of nitrogen groups at C-28 displayed same even potent activity than parent compound H6.In addition,its underlying mechanism of action and in vivo activity are in explore.展开更多
基金supported by Fundamental Research Funds for the Central Universities(2023KYJD1008)the Science Research Projects of the Anhui Higher Education Institutions of China(2022AH051582).
文摘Reversible solid oxide cell(RSOC)is a new energy conversion device with significant applications,especially for power grid peaking shaving.However,the reversible conversion process of power generation/energy storage poses challenges for the performance and stability of air electrodes.In this work,a novel high-entropy perovskite oxide La_(0.2)Pr_(0.2)Gd_(0.2)Sm_(0.2)Sr_(0.2)Co_(0.8)Fe_(0.2)O_(3−δ)(HE-LSCF)is proposed and investigated as an air electrode in RSOC.The electrochemical behavior of HE-LSCF was studied as an air electrode in both fuel cell and electrolysis modes.The polarization impedance(Rp)of the HE-LSCF electrode is only 0.25Ω·cm^(2) at 800℃ in an air atmosphere.Notably,at an electrolytic voltage of 2 V and a temperature of 800℃,the current density reaches up to 1.68 A/cm^(2).The HE-LSCF air electrode exhibited excellent reversibility and stability,and its electrochemical performance remains stable after 100 h of reversible operation.With these advantages,HE-LSCF is shown to be an excellent air electrode for RSOC.
文摘The effect of hydroxamic acid starch (HAS) and hydroxamic acid polyacrylamide (HPAM) on the flotation of diaspore and kaolinite was investigated by flotation test. It is found that HAS depresses diaspore but activates kaolinite in acidic pulp,while HPAM activates both diaspore and kaolinite in the pH range of 2.010.5. The measurement of zeta potential shows that both HAS and HPAM can increase zeta potential of negatively charged diaspore, which indicates the existence of chemical bonding or hydrogen bonding between the reagents and diaspore. By covering the collector dodecyl amine(DDA) on diaspore surface,HAS increases the hydrophilicity of minerals and depresses the flotation of diaspore,however HPAM activates the flotation of diaspore by increasing the adsorption of DDA on diaspore surface.
基金Project (2009ZX07315-002-01) supported by Water Pollution Control and Management of Major Special Science and Technology
文摘Full scale experimental study on nitrogen removal for low-carbon wastewater was conducted in reversed A2/O process in Jiguanshi waste water treatment plant in Chongqing,in order to aid the operation and maintenance of similar WWTP. When the proposed measures,such as using 0.1% (volume fraction of wastewater) landfill leachate,shortening HRT by 2/3 in the primary sedimentation tank and controlling DO at 0.5 mg/L in the 3rd section of aerobic zone,are applied,15% of the carbon source can be complemented,the favorable property of activated sludge is achieved,and the nitrogen removal effect is significantly improved. The effluent NH3-N is 2 mg/L and the removal rate is 90%. The effluent TN is 17 mg/L and the removal rate is 54%. The up-to-standard discharge of the effluent is achieved. And after the optimization,the unit electricity consumption also reaches 0.21 kW/h and saves 20%.
基金the supported by National Natural Science Foundation of China(No.61871318 and 11574250)Scientific Research Plan Projects of Shaanxi Education Department(No.19JK0568).
文摘Feature extraction is an important part of signal processing,which is significant for signal detection,classification,and recognition.The nonlinear dynamic analysis method can extract the nonlinear characteristics of signals and is widely used in different fields.Reverse dispersion entropy(RDE)proposed by us recently,as a nonlinear dynamic analysis method,has the advantages of fast computing speed and strong anti-noise ability,which is more suitable for measuring the complexity of signal than traditional permutation entropy(PE)and dispersion entropy(DE).Empirical wavelet transform(EWT),based on the theory of wavelet analysis,can decompose a complex non-stationary signal into a number of empirical wavelet functions(EWFs)with compact support set spectrum,which has better decomposition performance than empirical mode decomposition(EMD)and its improved algorithms.Considering the advantages of RDE and EWT,on the one hand,we introduce EWT into the field of underwater acoustic signal processing and fault diagnosis to improve the signal decomposition accuracy;on the other hand,we use RDE as the features of EWFs to improve the signal separability and stability.Finally,we propose a novel signal feature extraction technology based on EWT and RDE in this paper.Experimental results show that the proposed feature extraction technology can effectively extract the complexity features of actual signals.Moreover,it also has higher distinguishing ability for different types of signals than five latest feature extraction technologies.
基金Projects(20673036,J0830415) supported by the National Natural Science Foundation of ChinaProject(09JJ3025) supported by Hunan Provincial Natural Science Foundation of ChinaProject(09GK3173) supported by the Planned Science and Technology Project of Hunan Province,China
文摘Ni nanoparticles plating was prepared in reverse microemulsion. The deposition was carried out through the Brownian motion of water pools in the reverse microemulsion and the adsorption of water pools on the electrode surface. Effects of electrolytic parameters on the size of Ni particles were studied. The performances of hydrogen evolution and hydrogen storage of the Ni nanoparticles plating electrode were also investigated. The results indicate that the size of Ni nanoparticles decreases with the increase of Ni2+ concentration and the decrease of current density. The electrochemical activity of Ni nanoparticles plating electrode is much higher than that of bulk Ni electrode.
文摘Utilizing the technique of electrolysis with reverse current,sodium tungsten bronze (Na_xWO_3) crystals were prepared from a molten mixture of sodium tungstate (Na_2WO_4 ) and tungstic trioxide (WO_3) at 800℃. Crystal structure, lattice parameter, and s
文摘In this paper, we investigate the precursors of large earthquakes in the eastern region of Taiwan by means of the reverse tracing of precursors. We discuss the parameters which are suitable for the seismic chains and intermedi- ate-term patterns in this region and obtain the threshold of the patterns. Applying the linear discriminate method to the intermediate-term patterns of seismic chains, we present an approach for exploring the precursors of large earthquakes. The results show that this method can reduce the false alarm rate for large earthquakes in this region, and the reverse tracing of precursors can be applied to the eastern region of Taiwan.
文摘The Influence of pulp pH, dispersants and auxiliary collectors on reverse flotation of carbonate-containing iron ores were explored. Interactions between iron ores and quartz were theoretically analyzed by flotation solution chemistry and DLVO theory. The results indicated that the iron concentrate grade improved sharply when pH increased from 11.0 to 12.0, but changed unobviously when pH was larger than 12.0, which was related to solution chemistry of siderite and interactions among particles. Sodium tripolyphosphate was an effective dispersant and sodium dodecyl sulfate was an effective auxiliary collector of KS-III. Both recovery and grade enhanced by the action of sodium dodecyl sulfate or sodium tripolyphosphate when pH was 12.0.
文摘Computer-integrated manufacturing (CIM) and revers e engineering (RE) have changed drastically the concept of product re-design, pla nning and manufacture of components. However, the main problems currently facing the developers of reverse engineering system, is the time consuming digitis ation of 3D data and the conversion of large amounts of data into a concise and manageable format and linking it to a CAD/CAM system. Automated 3-D profile gen eration, measurements and inspection of manufactured component represents one of the important functions in reverse engineering and in the improvements in produ ct quality in rapid product developments. The paper presents a novel methodology for the development of a reverse enginee ring technique for use in the rapid product development in a CIM environment . The system developed provides integration, data capture and manipulation, dat a transfer between a CAD, CAM, Computer-aided inspection (CAI) and a 3-D profi le scanning system. An efficient scanning strategy has been developed for scann ing and surfaces data acquisition. The products were scanned using a laser scann ing system with a dedicated scan control card and the associated software packag es. A versatile rig was developed for the ease of data gathering of the profile scanning process. The surface data collected was then used to build a mathematic al surface model, which was then used to develop a virtual 3-D model of the pro duct. The resulting surface model provides the geometrical input to the subseque nt machining operation using either a CNC system or other manufacturing operatio n e.g. dies casting/mould casting etc. The prototypes developed were inspected u sing a state-of-the art CNC-CMM that was integrated to the CAD/CAM system. Si nce the scanning/digitised data captured by laser scanning probes requires no ma nual editing, significant time saving over most non-contact probe systems was a chieved. Since the creation of an accurate CAD model of a redesigned component o r a prototype constitute a major element of the total turnaround time; maximum r eturn can be achieved by increasing the efficiency of the redesigning process. T he paper also outlines with a case study the application of the developed system . The system developed offers the flexibility of using the concept of reverse en gineering of a variety of components with the complimentary facility of integrat ion between CAD/CAM Computer-aided Inspection (CAI) systems and a scanning syst em. The developed reverse engineering application in an integrated manufacturing system can increase the consistency, improve cost-efficiency, reduce produ ct turn around and skill levels required to redesign, reengineer and prototyping components and products.
基金Projects(50978087,51009063,50978088)supported by the National Natural Science Foundation of China
文摘An environment friendly bio-surfactant of rhamnolipid(RL) was used as a solvent. The enzymatic reaction of oleic acid catalyzed by lipase and lignin peroxidase(lip) was evaluated. The optimum conditions of enzymatic reaction catalyzed by lipase(lip) were water to amphiphile molar ratio of 30(20), RL of 60(60) critical micelle concentration(CMC), pH of 7.0(3.0) and temperature of 40(30) °C, respectively. The change of enzyme conformation indicates that, for catalytic of lipase, water content is the most important factor of the enzymatic reaction of oleic acid, and p H for lip. With individual optimum conditions, the enzymatic efficiency of oleic acid catalyzed by lipase is higher than that by lip. In the presence of ethanol, the enzymatic reaction of oleic acid catalyzed by lipase suits Ping-Pong Bi-Bi mechanism. As an alternative to chemical reversed micelles, the RL reversed micelles are promising methods to enzymatic reaction of oleic acid.
文摘In this paper,a series of new techniques are used to optimize typical laser scanning sensor.The integrated prototype is compared with traditional approach to demonstrate the much improved performance.In the research and development,camera calibration is achieved by extracting characteristic points of the laser plane,so that the calibra- tion efficiency is improved significantly.With feedback control of its intensity,the laser is automatically adjusted for different material.A modified algorithm is presented to improve the accuracy of laser stripe extraction.The fusion of data extracted from left and right camera is completed with re-sampling technique.The scanner is integrated with a robot arm and some other machinery for on-line measurement and inspection,which provides a flexible measurement tool for reverse engineering.
文摘Ni/n-SiO2 composite coating was electrodeposited by brush-plating with pulse-reverse current（RC）. The morphology, hardness, and tribological properties of the coating were investigated and compared with those of Ni and composite coatings electrodeposited with direct current（DC）. The results indicate that Ni/n-SiO2 composite coating electrodeposited by RC, because of RC and the nano powders, has denser coating, finer crystal grains, higher hardness（HV650.0, nearly 1.5 times higher than that of Ni coating electrodeposited by DC） and lower friction coefficient（nearly 0.62）, as a result, in the wearing experiment, the Ni/n-SiO2 composite coating electrodeposited by RC has the least worn loss. So this kind of coating has better wear resistance. And RC electro brush-plating can be used as a new technology of brush-plating in the area of wear resistance.
基金Projects(51071067,21271069,20673036,J1210040,50473022) supported by National Natural Science Foundation of ChinaProject(2013GK3015) supported by the Science and Technology Program of Hunan Province,China
文摘The electro-polymerization behavior of aniline in reverse(W/O) microemulsion was investigated. The experiment results show that the cyclic voltammetry polymerization behavior of aniline in W/O microemulsion is different from that in aqueous solution remarkably. With the increase of scan cycle, the oxidation potential shifts positively and the reduction potential shifts negatively, i.e., the redox potential difference increases. H+ apparent concentration affects the aniline polymerization evidently. When H+ concentration is lower than 0.08 mol/L, the electro-polymerization of aniline is difficult. With the increase of H+ concentration, the polymerization current of aniline increases gradually. Only when H+ concentration is high enough(0.5 mol/L), aniline can be well electro-polymerized. Moreover, under the same condition, the aniline polymerization current in W/O microemulsion is higher than that in aqueous solution. The scanning electron microscopy image shows that the deposited polyaniline(PANI) has uniform fiber morphology with diameter of about 100 nm. Further study result suggests that the electrochemical activity of the PANI in HCl is similar to that of the PANI prepared in aqueous solution.
基金supported by State Key Laboratory of Drug Research(SIMM1705KF-07)
文摘α-Hederagenin(H),derived from Hedera nepalensis var.sinensis,is a pentacyclic oleane-type triterpenoid that exhibits clear cytotoxicity to different tumor cell lines.In this study,a series of novel C-28 derivatives of hederagenin(H) were designed and synthesized in attempt to develop potent tumor resistance reverse activities agents.Previous research showed that H6 displayed robust reverse activity for paclitaxel resistance in KBV cells.Importantly,Co-treatment of paclitaxel with H6 significantly reduced the tumor weight to 42%.Pleasingly,H6 enhanced the efficacy of paclitaxel against KBV cancer cell-derived xenograft tumors in nude mice.Mechanism studies had found that H6 activated permeability glycoprotein(P-gp) ATPase,reduced intracellular ATP levels and inhibited efflux of P-gp substrates,thus enhancing the antitumor activity of paclitaxel on KBV cells.Molecular docking analysis of homology P-gp and H6 then conducted using the Surflex-Dock module.H6 showed a high binding affinity docking score with a total score of 5.4148,much higher than that of H(0.1414).The nov.el C-28 derivatives of H was synthesized from H6 via three-step reaction.The reversal activity of all synthesized H derivatives were tested using the MTT assay.The results showed that the derivatives of nitrogen groups at C-28 displayed same even potent activity than parent compound H6.In addition,its underlying mechanism of action and in vivo activity are in explore.
