To investigate the applicability of four commonly used color difference formulas(CIELAB,CIE94,CMC(1:1),and CIEDE2000)in the printing field on 3D objects,as well as the impact of four standard light sources(D65,D50,A,a...To investigate the applicability of four commonly used color difference formulas(CIELAB,CIE94,CMC(1:1),and CIEDE2000)in the printing field on 3D objects,as well as the impact of four standard light sources(D65,D50,A,and TL84)on 3D color difference evaluations,50 glossy spheres with a diameter of 2cm based on the Sailner J4003D color printing device were created.These spheres were centered around the five recommended colors(gray,red,yellow,green,and blue)by CIE.Color difference was calculated according to the four formulas,and 111 pairs of experimental samples meeting the CIELAB gray scale color difference requirements(1.0-14.0)were selected.Ten observers,aged between 22 and 27 with normal color vision,were participated in this study,using the gray scale method from psychophysical experiments to conduct color difference evaluations under the four light sources,with repeated experiments for each observer.The results indicated that the overall effect of the D65 light source on 3D objects color difference was minimal.In contrast,D50 and A light sources had a significant impact within the small color difference range,while the TL84 light source influenced both large and small color difference considerably.Among the four color difference formulas,CIEDE2000 demonstrated the best predictive performance for color difference in 3D objects,followed by CMC(1:1),CIE94,and CIELAB.展开更多
To enhance the computational efficiency of spatio-temporally discretized phase-field models,we present a high-speed solver specifically designed for the Poisson equations,a component frequently used in the numerical c...To enhance the computational efficiency of spatio-temporally discretized phase-field models,we present a high-speed solver specifically designed for the Poisson equations,a component frequently used in the numerical computation of such models.This efficient solver employs algorithms based on discrete cosine transformations(DCT)or discrete sine transformations(DST)and is not restricted by any spatio-temporal schemes.Our proposed methodology is appropriate for a variety of phase-field models and is especially efficient when combined with flow field systems.Meanwhile,this study has conducted an extensive numerical comparison and found that employing DCT and DST techniques not only yields results comparable to those obtained via the Multigrid(MG)method,a conventional approach used in the resolution of the Poisson equations,but also enhances computational efficiency by over 90%.展开更多
This paper describes male-female differences in speech behavior from the following aspects: their different attitudes towards public speaking and private speaking; their different attitudes towards public details and ...This paper describes male-female differences in speech behavior from the following aspects: their different attitudes towards public speaking and private speaking; their different attitudes towards public details and private details; their different purposes towards troubles; their different attitudes towards asking information. Then this paper presents explanations for male-female differences in speech behavior from social point of view and anthropological point of view.展开更多
Mistakes occur here and there when Chinese learners of English apply the foreign language in practice. This paper analyzes some common mistakes derived from cultural differences and tries to illustrate that language, ...Mistakes occur here and there when Chinese learners of English apply the foreign language in practice. This paper analyzes some common mistakes derived from cultural differences and tries to illustrate that language, as a part of culture should be taught and learnt as an integral part of learning about the target culture so that learners can gain a full understanding and good command of the foreign language.展开更多
For the frequency difference of arrival （FDOA） esti-mation in passive location, this paper transforms the frequency difference estimation into the radial velocity difference estimation, which is difficult to achieve...For the frequency difference of arrival （FDOA） esti-mation in passive location, this paper transforms the frequency difference estimation into the radial velocity difference estimation, which is difficult to achieve a high accuracy due to the mismatch between the sampling period and the pulse repetition interval. The proposed algorithm firstly estimates the point-in-time that each pulse arrives at two receivers accurately. Secondly two time of arrival （TOA） sequences are subtracted. And final y the radial ve-locity difference of a target relative to two stations with the least square method is estimated. This algorithm only needs accurate estimation of the time delay between pulses and is not influenced by parameters such as frequency and modulation mode. It avoids transmitting a large amount of data between two stations in real time. Simulation results corroborate that the performance is bet-ter than the arithmetic average of the Cramer-Rao lower bound （CRLB） for monopulse under suitable conditions.展开更多
This paper aims at study the politeness in the pragmatic framework and reviews the main studies of politeness by western and Chinese scholars.Meanwhile,the writer tries to reveal the cultural difference existing in po...This paper aims at study the politeness in the pragmatic framework and reviews the main studies of politeness by western and Chinese scholars.Meanwhile,the writer tries to reveal the cultural difference existing in politeness by comparative study of western and Chinese language.展开更多
Based on some assumptions, the dynamic analysis model of anchorage system is established. The dynamic governing equation is expressed as finite difference format and programmed by using MATLAB language. Compared with ...Based on some assumptions, the dynamic analysis model of anchorage system is established. The dynamic governing equation is expressed as finite difference format and programmed by using MATLAB language. Compared with theoretical method, the finite difference method has been verified to be feasible by a case study. It is found that under seismic loading, the dynamic response of anchorage system is synchronously fluctuated with the seismic vibration. The change of displacement amplitude of material points is slight, and comparatively speaking, the displacement amplitude of the outside point is a little larger than that of the inside point, which shows amplification effect of surface. While the axial force amplitude transforms considerably from the inside to the outside. It increases first and reaches the peak value in the intersection between the anchoring section and free section, then decreases slowly in the free section. When considering damping effect of anchorage system, the finite difference method can reflect the time attenuation characteristic better, and the calculating result would be safer and more reasonable than the dynamic steady-state theoretical method. What is more, the finite difference method can be applied to the dynamic response analysis of harmonic and seismic random vibration for all kinds of anchor, and hence has a broad application prospect.展开更多
The perfect sequences are so ideal that all out-of-phase autocorrelation coefficients are zero, and if the sequences are used as the coding modulating signal for the phase-modulated radar, there will be no interferenc...The perfect sequences are so ideal that all out-of-phase autocorrelation coefficients are zero, and if the sequences are used as the coding modulating signal for the phase-modulated radar, there will be no interference of side lobes theoretically. However, it has been proved that there are no binary perfect sequences of period 4 〈 n ≤ 12100. Hence, the almost perfect sequences with all out-of-phase autocorrelation coefficients as zero except one are of great practice in engineering. Currently, the cyclic difference set is one of most effective tools to analyze the binary sequences with perfect periodic autocorrelation function. In this article, two characteristic formulas corresponding to the autocorrelation and symmetric structure of almost perfect sequences are calculated respectively. All almost perfect sequences with period n, which is a multiple of 4, can be figured out by the two formulas. Several almost perfect sequences with different periods have been hunted by the program based on the two formulas and then applied to the simulation program and practical application for ionospheric sounding.展开更多
The extreme temperature differences in fiat steel box girder of a cable-stayed bridge were studied.Firstly,by using the long-term measurement data collected by the structural health monitoring system installed on the ...The extreme temperature differences in fiat steel box girder of a cable-stayed bridge were studied.Firstly,by using the long-term measurement data collected by the structural health monitoring system installed on the Runyang Cable-stayed Bridge,the daily variations as well as seasonal ones of measured temperature differences in the box girder cross-section area were summarized.The probability distribution models of temperature differences were further established and the extreme temperature differences were estimated with a return period of 100 years.Finally,the temperature difference models in cross-section area were proposed for bridge thermal design.The results show that horizontal temperature differences in top plate and vertical temperature differences between top plate and bottom plate are considerable.All the positive and negative temperature differences can be described by the weighted sum of two Weibull distributions.The maximum positive and negative horizontal temperature differences in top plate are 10.30 ℃ and -13.80 ℃,respectively.And the maximum positive and negative vertical temperature differences between top plate and bottom plate are 17.30 ℃ and-3.70 ℃,respectively.For bridge thermal design,there are two vertical temperature difference models between top plate and bottom plate,and six horizontal temperature difference models in top plate.展开更多
The ground penetrating radar(GPR) forward simulation all aims at the singular and regular models, such as sandwich model, round cavity, square cavity, and so on, which are comparably simple. But as to the forward of c...The ground penetrating radar(GPR) forward simulation all aims at the singular and regular models, such as sandwich model, round cavity, square cavity, and so on, which are comparably simple. But as to the forward of curl interface underground or “v” figure complex model, it is difficult to realize. So it is important to forward the complex geoelectricity model. This paper takes two Maxwell’s vorticity equations as departure point, makes use of the principles of Yee’s space grid model theory and the basic principle finite difference time domain method, and deduces a GPR forward system of equation of two dimensional spaces. The Mur super absorbed boundary condition is adopted to solve the super strong reflection on the interceptive boundary when there is the forward simulation. And a self-made program is used to process forward simulation to two typical geoelectricity model.展开更多
The advancement of small satellites is promoting the development of distributed satellite systems,and for the latter,it is essential to coordinate the spatial and temporal relations between mutually visible satellites...The advancement of small satellites is promoting the development of distributed satellite systems,and for the latter,it is essential to coordinate the spatial and temporal relations between mutually visible satellites.By now,dual one-way ranging(DOWR)and two-way time transfer(TWTT)are generally integrated in the same software and hardware system to meet the limitations of small satellites in terms of size,weight and power(SWaP)consumption.However,studies show that pseudo-noise regenerative ranging(PNRR)performs better than DOWR if some advanced implementation technologies are employed.Besides,PNRR has no requirement on time synchronization.To apply PNRR to small satellites,and meanwhile,meet the demand for time difference measurement,we propose the round-way time difference measurement,which can be combined with PNRR to form a new integrated system without exceeding the limits of SWaP.The new integrated system can provide distributed small satellite systems with on-orbit high-accuracy and high-precision distance measurement and time difference measurement in real time.Experimental results show that the precision of ranging is about 1.94 cm,and that of time difference measurement is about 78.4 ps,at the signal to noise ratio of 80 dBHz.展开更多
A new method based on phase difference analysis is proposed for the single-channel mixed signal separation of single-channel radar fuze.This method is used to estimate the mixing coefficients of de-noised signals thro...A new method based on phase difference analysis is proposed for the single-channel mixed signal separation of single-channel radar fuze.This method is used to estimate the mixing coefficients of de-noised signals through the cumulants of mixed signals,solve the candidate data set by the mixing coefficients and signal analytical form,and resolve the problem of vector ambiguity by analyzing the phase differences.The signal separation is realized by exchanging data of the solutions.The waveform similarity coefficients are calculated,and the time鈥攆requency distributions of separated signals are analyzed.The results show that the proposed method is effective.展开更多
The chroma difference(DC) and lightness difference (DL) of 288 jadeite-jades with fine texture and even green color have been analyzed based on color difference formula CIE LAB in the uniform color space CIE 1976 L^~*...The chroma difference(DC) and lightness difference (DL) of 288 jadeite-jades with fine texture and even green color have been analyzed based on color difference formula CIE LAB in the uniform color space CIE 1976 L^~*a^~*b^~* to evaluate their contribution to the color appearance and color difference(DE).The analysis of lightness(L^~*), chroma(C^~*) and hue-angle(h_o) show that the vivid yellowish green color occurs when L^~*∈5.29-59.2,展开更多
A fast explicit finite difference method (FEFDM),derived from the differential equations of one-dimensional steady pipe flow,was presented for calculation of wellhead injection pressure.Recalculation with a traditiona...A fast explicit finite difference method (FEFDM),derived from the differential equations of one-dimensional steady pipe flow,was presented for calculation of wellhead injection pressure.Recalculation with a traditional numerical method of the same equations corroborates well the reliability and rate of FEFDM.Moreover,a flow rate estimate method was developed for the project whose injection rate has not been clearly determined.A wellhead pressure regime determined by this method was successfully applied to the trial injection operations in Shihezi formation of Shenhua CCS Project,which is a good practice verification of FEFDM.At last,this method was used to evaluate the effect of friction and acceleration terms on the flow equation on the wellhead pressure.The result shows that for deep wellbore,the friction term can be omitted when flow rate is low and in a wide range of velocity the acceleration term can always be deleted.It is also shown that with flow rate increasing,the friction term can no longer be neglected.展开更多
To investigate the causes qf cracks in multistory masonry buildings, the effect of vertical load difference on cracking behaviors was investigated experimentally by testing and measuring the displacements at the testi...To investigate the causes qf cracks in multistory masonry buildings, the effect of vertical load difference on cracking behaviors was investigated experimentally by testing and measuring the displacements at the testing points of a large sized real masonry U-shaped model. Additionally, the cracking behaviors in U-shaped model were analyzed with shear stress and numerical simulated with ANSYS software. The experimental results show that the deformation increases with the increase of the vertical load. The vertical load results in different deformation between the bearing wall and non-bearing wall, which leads to cracking on the non-beating wall. The rapid deformation happens at 160 kN and cracks occur firstly at the top section of non-bearing wall near to the bearing wall. New cracks are observed and the previous cracks are enlarged and developed with the increase of vertical load. The maximum crack opening reaches 12 mm, and the non-bearing wall is about to collapse when the vertical load arrives at 380 kN. Theoretical analysis indicates that the shear stress reaches the maximum value at the top section of the non-bearing wall, and thus cracks tend to happen at the top section of the non-bearing wall. Numerical simulation results about the cracking behaviors are in good agreement with experiments results.展开更多
This paper analyzes cultural differences of English and Chinese in terms of Seven Types of Meaning . It proceeds from the theory of Leech’s Seven Types of meaning , then comparatively illustrates with analysis of eac...This paper analyzes cultural differences of English and Chinese in terms of Seven Types of Meaning . It proceeds from the theory of Leech’s Seven Types of meaning , then comparatively illustrates with analysis of each type of meaning and cultural differences. And concludes with the cause of cultural differences and problems of it in cross-cultural communication with the hope that Chinese student could avoid Chinglish in learning and both Chinese and foreigners could avoid cultural shock when communicating with each other.展开更多
A new general optimal principle of designing explicit finite difference method was obtained. Several applied cases were put forward to explain the uses of the principle. The validity of the principal was tested by a n...A new general optimal principle of designing explicit finite difference method was obtained. Several applied cases were put forward to explain the uses of the principle. The validity of the principal was tested by a numeric example.展开更多
Analyzed the relation between time delay difference and time delay estimation errors, based on the principles of three-point locating, a reformed threshold method for time delay difference estimation of impulse signal...Analyzed the relation between time delay difference and time delay estimation errors, based on the principles of three-point locating, a reformed threshold method for time delay difference estimation of impulse signals, called as amendment estimation for short, is developed by introducing channel equalization technique to its conventional version, named as direct estimation in this paper, to improve the estimation stability. After inherent relationship between time delay and phase shift of signals is analyzed, an integer period error compensation method utilized the diversities of both contribution share and contribution mode of concerned estimates is proposed under the condition of high precision phase lag estimation. Finally, a cooperative multi-threshold estimation method composed of amendment and direct estimations to process impulse signals with three thresholds is established. In sea trials data tests of passive locating, this method improves the estimation precision of time delay difference efficiently. The experiments verify the theoretical predictions.展开更多
A robust on-line fault diagnosis methor based on least squares estimate for nonlinear difference-algebraic systems (DAS) with uncertainties is proposed. Based on the known nominal model of the DAS, this method firstly...A robust on-line fault diagnosis methor based on least squares estimate for nonlinear difference-algebraic systems (DAS) with uncertainties is proposed. Based on the known nominal model of the DAS, this method firstly constructs an auxiliary system consisting of a difference equation and an algebraic equation, then, based on the relationship between the state deviation and the faults in the difference equation and the relationship between the algebraic variable deviation and the faults in algebraic equation, it identifies the faults on-line through least squares estimate. This method can not only detect, isolate and identify faults for DAS, but also give the upper bound of the error of fault identification. The simulation results indicate that it can give satisfactory diagnostic results for both abrupt and incipient faults.展开更多
文摘To investigate the applicability of four commonly used color difference formulas(CIELAB,CIE94,CMC(1:1),and CIEDE2000)in the printing field on 3D objects,as well as the impact of four standard light sources(D65,D50,A,and TL84)on 3D color difference evaluations,50 glossy spheres with a diameter of 2cm based on the Sailner J4003D color printing device were created.These spheres were centered around the five recommended colors(gray,red,yellow,green,and blue)by CIE.Color difference was calculated according to the four formulas,and 111 pairs of experimental samples meeting the CIELAB gray scale color difference requirements(1.0-14.0)were selected.Ten observers,aged between 22 and 27 with normal color vision,were participated in this study,using the gray scale method from psychophysical experiments to conduct color difference evaluations under the four light sources,with repeated experiments for each observer.The results indicated that the overall effect of the D65 light source on 3D objects color difference was minimal.In contrast,D50 and A light sources had a significant impact within the small color difference range,while the TL84 light source influenced both large and small color difference considerably.Among the four color difference formulas,CIEDE2000 demonstrated the best predictive performance for color difference in 3D objects,followed by CMC(1:1),CIE94,and CIELAB.
基金Supported by Shanxi Province Natural Science Research(202203021212249)Special/Youth Foundation of Taiyuan University of Technology(2022QN101)+3 种基金National Natural Science Foundation of China(12301556)Research Project Supported by Shanxi Scholarship Council of China(2021-029)International Cooperation Base and Platform Project of Shanxi Province(202104041101019)Basic Research Plan of Shanxi Province(202203021211129)。
文摘To enhance the computational efficiency of spatio-temporally discretized phase-field models,we present a high-speed solver specifically designed for the Poisson equations,a component frequently used in the numerical computation of such models.This efficient solver employs algorithms based on discrete cosine transformations(DCT)or discrete sine transformations(DST)and is not restricted by any spatio-temporal schemes.Our proposed methodology is appropriate for a variety of phase-field models and is especially efficient when combined with flow field systems.Meanwhile,this study has conducted an extensive numerical comparison and found that employing DCT and DST techniques not only yields results comparable to those obtained via the Multigrid(MG)method,a conventional approach used in the resolution of the Poisson equations,but also enhances computational efficiency by over 90%.
文摘This paper describes male-female differences in speech behavior from the following aspects: their different attitudes towards public speaking and private speaking; their different attitudes towards public details and private details; their different purposes towards troubles; their different attitudes towards asking information. Then this paper presents explanations for male-female differences in speech behavior from social point of view and anthropological point of view.
文摘Mistakes occur here and there when Chinese learners of English apply the foreign language in practice. This paper analyzes some common mistakes derived from cultural differences and tries to illustrate that language, as a part of culture should be taught and learnt as an integral part of learning about the target culture so that learners can gain a full understanding and good command of the foreign language.
基金supported by the National Natural Science Foundationof China(61201208)
文摘For the frequency difference of arrival （FDOA） esti-mation in passive location, this paper transforms the frequency difference estimation into the radial velocity difference estimation, which is difficult to achieve a high accuracy due to the mismatch between the sampling period and the pulse repetition interval. The proposed algorithm firstly estimates the point-in-time that each pulse arrives at two receivers accurately. Secondly two time of arrival （TOA） sequences are subtracted. And final y the radial ve-locity difference of a target relative to two stations with the least square method is estimated. This algorithm only needs accurate estimation of the time delay between pulses and is not influenced by parameters such as frequency and modulation mode. It avoids transmitting a large amount of data between two stations in real time. Simulation results corroborate that the performance is bet-ter than the arithmetic average of the Cramer-Rao lower bound （CRLB） for monopulse under suitable conditions.
文摘This paper aims at study the politeness in the pragmatic framework and reviews the main studies of politeness by western and Chinese scholars.Meanwhile,the writer tries to reveal the cultural difference existing in politeness by comparative study of western and Chinese language.
基金Projects(51308273,41372307,41272326) supported by the National Natural Science Foundation of ChinaProjects(2010(A)06-b) supported by Science and Technology Fund of Yunan Provincial Communication Department,China
文摘Based on some assumptions, the dynamic analysis model of anchorage system is established. The dynamic governing equation is expressed as finite difference format and programmed by using MATLAB language. Compared with theoretical method, the finite difference method has been verified to be feasible by a case study. It is found that under seismic loading, the dynamic response of anchorage system is synchronously fluctuated with the seismic vibration. The change of displacement amplitude of material points is slight, and comparatively speaking, the displacement amplitude of the outside point is a little larger than that of the inside point, which shows amplification effect of surface. While the axial force amplitude transforms considerably from the inside to the outside. It increases first and reaches the peak value in the intersection between the anchoring section and free section, then decreases slowly in the free section. When considering damping effect of anchorage system, the finite difference method can reflect the time attenuation characteristic better, and the calculating result would be safer and more reasonable than the dynamic steady-state theoretical method. What is more, the finite difference method can be applied to the dynamic response analysis of harmonic and seismic random vibration for all kinds of anchor, and hence has a broad application prospect.
基金This poject was supported by the National Natural Science Foundation of China (40474066).
文摘The perfect sequences are so ideal that all out-of-phase autocorrelation coefficients are zero, and if the sequences are used as the coding modulating signal for the phase-modulated radar, there will be no interference of side lobes theoretically. However, it has been proved that there are no binary perfect sequences of period 4 〈 n ≤ 12100. Hence, the almost perfect sequences with all out-of-phase autocorrelation coefficients as zero except one are of great practice in engineering. Currently, the cyclic difference set is one of most effective tools to analyze the binary sequences with perfect periodic autocorrelation function. In this article, two characteristic formulas corresponding to the autocorrelation and symmetric structure of almost perfect sequences are calculated respectively. All almost perfect sequences with period n, which is a multiple of 4, can be figured out by the two formulas. Several almost perfect sequences with different periods have been hunted by the program based on the two formulas and then applied to the simulation program and practical application for ionospheric sounding.
基金Project(51178100)supported by the National Natural Science Foundation of ChinaProject(1105007001)supported by the Foundation of the Priority Academic Development Program of Higher Education Institute of Jiangsu Province,ChinaProject(3205001205)supported by the Teaching and Research Foundation for Excellent Young Teachers of Southeast University,China
文摘The extreme temperature differences in fiat steel box girder of a cable-stayed bridge were studied.Firstly,by using the long-term measurement data collected by the structural health monitoring system installed on the Runyang Cable-stayed Bridge,the daily variations as well as seasonal ones of measured temperature differences in the box girder cross-section area were summarized.The probability distribution models of temperature differences were further established and the extreme temperature differences were estimated with a return period of 100 years.Finally,the temperature difference models in cross-section area were proposed for bridge thermal design.The results show that horizontal temperature differences in top plate and vertical temperature differences between top plate and bottom plate are considerable.All the positive and negative temperature differences can be described by the weighted sum of two Weibull distributions.The maximum positive and negative horizontal temperature differences in top plate are 10.30 ℃ and -13.80 ℃,respectively.And the maximum positive and negative vertical temperature differences between top plate and bottom plate are 17.30 ℃ and-3.70 ℃,respectively.For bridge thermal design,there are two vertical temperature difference models between top plate and bottom plate,and six horizontal temperature difference models in top plate.
文摘The ground penetrating radar(GPR) forward simulation all aims at the singular and regular models, such as sandwich model, round cavity, square cavity, and so on, which are comparably simple. But as to the forward of curl interface underground or “v” figure complex model, it is difficult to realize. So it is important to forward the complex geoelectricity model. This paper takes two Maxwell’s vorticity equations as departure point, makes use of the principles of Yee’s space grid model theory and the basic principle finite difference time domain method, and deduces a GPR forward system of equation of two dimensional spaces. The Mur super absorbed boundary condition is adopted to solve the super strong reflection on the interceptive boundary when there is the forward simulation. And a self-made program is used to process forward simulation to two typical geoelectricity model.
基金supported by the National Natural Science Foundation of China(61401389).
文摘The advancement of small satellites is promoting the development of distributed satellite systems,and for the latter,it is essential to coordinate the spatial and temporal relations between mutually visible satellites.By now,dual one-way ranging(DOWR)and two-way time transfer(TWTT)are generally integrated in the same software and hardware system to meet the limitations of small satellites in terms of size,weight and power(SWaP)consumption.However,studies show that pseudo-noise regenerative ranging(PNRR)performs better than DOWR if some advanced implementation technologies are employed.Besides,PNRR has no requirement on time synchronization.To apply PNRR to small satellites,and meanwhile,meet the demand for time difference measurement,we propose the round-way time difference measurement,which can be combined with PNRR to form a new integrated system without exceeding the limits of SWaP.The new integrated system can provide distributed small satellite systems with on-orbit high-accuracy and high-precision distance measurement and time difference measurement in real time.Experimental results show that the precision of ranging is about 1.94 cm,and that of time difference measurement is about 78.4 ps,at the signal to noise ratio of 80 dBHz.
文摘A new method based on phase difference analysis is proposed for the single-channel mixed signal separation of single-channel radar fuze.This method is used to estimate the mixing coefficients of de-noised signals through the cumulants of mixed signals,solve the candidate data set by the mixing coefficients and signal analytical form,and resolve the problem of vector ambiguity by analyzing the phase differences.The signal separation is realized by exchanging data of the solutions.The waveform similarity coefficients are calculated,and the time鈥攆requency distributions of separated signals are analyzed.The results show that the proposed method is effective.
文摘The chroma difference(DC) and lightness difference (DL) of 288 jadeite-jades with fine texture and even green color have been analyzed based on color difference formula CIE LAB in the uniform color space CIE 1976 L^~*a^~*b^~* to evaluate their contribution to the color appearance and color difference(DE).The analysis of lightness(L^~*), chroma(C^~*) and hue-angle(h_o) show that the vivid yellowish green color occurs when L^~*∈5.29-59.2,
基金Project(Z110803)supported by the State Key Laboratory of Geomechanics and Geotechnical Engineering,ChinaProject(2008AA062303)supported by the National High Technology Research and Development Program of China
文摘A fast explicit finite difference method (FEFDM),derived from the differential equations of one-dimensional steady pipe flow,was presented for calculation of wellhead injection pressure.Recalculation with a traditional numerical method of the same equations corroborates well the reliability and rate of FEFDM.Moreover,a flow rate estimate method was developed for the project whose injection rate has not been clearly determined.A wellhead pressure regime determined by this method was successfully applied to the trial injection operations in Shihezi formation of Shenhua CCS Project,which is a good practice verification of FEFDM.At last,this method was used to evaluate the effect of friction and acceleration terms on the flow equation on the wellhead pressure.The result shows that for deep wellbore,the friction term can be omitted when flow rate is low and in a wide range of velocity the acceleration term can always be deleted.It is also shown that with flow rate increasing,the friction term can no longer be neglected.
基金Project(50778067) supported by the National Natural Science Foundation of China
文摘To investigate the causes qf cracks in multistory masonry buildings, the effect of vertical load difference on cracking behaviors was investigated experimentally by testing and measuring the displacements at the testing points of a large sized real masonry U-shaped model. Additionally, the cracking behaviors in U-shaped model were analyzed with shear stress and numerical simulated with ANSYS software. The experimental results show that the deformation increases with the increase of the vertical load. The vertical load results in different deformation between the bearing wall and non-bearing wall, which leads to cracking on the non-beating wall. The rapid deformation happens at 160 kN and cracks occur firstly at the top section of non-bearing wall near to the bearing wall. New cracks are observed and the previous cracks are enlarged and developed with the increase of vertical load. The maximum crack opening reaches 12 mm, and the non-bearing wall is about to collapse when the vertical load arrives at 380 kN. Theoretical analysis indicates that the shear stress reaches the maximum value at the top section of the non-bearing wall, and thus cracks tend to happen at the top section of the non-bearing wall. Numerical simulation results about the cracking behaviors are in good agreement with experiments results.
文摘This paper analyzes cultural differences of English and Chinese in terms of Seven Types of Meaning . It proceeds from the theory of Leech’s Seven Types of meaning , then comparatively illustrates with analysis of each type of meaning and cultural differences. And concludes with the cause of cultural differences and problems of it in cross-cultural communication with the hope that Chinese student could avoid Chinglish in learning and both Chinese and foreigners could avoid cultural shock when communicating with each other.
文摘A new general optimal principle of designing explicit finite difference method was obtained. Several applied cases were put forward to explain the uses of the principle. The validity of the principal was tested by a numeric example.
文摘Analyzed the relation between time delay difference and time delay estimation errors, based on the principles of three-point locating, a reformed threshold method for time delay difference estimation of impulse signals, called as amendment estimation for short, is developed by introducing channel equalization technique to its conventional version, named as direct estimation in this paper, to improve the estimation stability. After inherent relationship between time delay and phase shift of signals is analyzed, an integer period error compensation method utilized the diversities of both contribution share and contribution mode of concerned estimates is proposed under the condition of high precision phase lag estimation. Finally, a cooperative multi-threshold estimation method composed of amendment and direct estimations to process impulse signals with three thresholds is established. In sea trials data tests of passive locating, this method improves the estimation precision of time delay difference efficiently. The experiments verify the theoretical predictions.
文摘A robust on-line fault diagnosis methor based on least squares estimate for nonlinear difference-algebraic systems (DAS) with uncertainties is proposed. Based on the known nominal model of the DAS, this method firstly constructs an auxiliary system consisting of a difference equation and an algebraic equation, then, based on the relationship between the state deviation and the faults in the difference equation and the relationship between the algebraic variable deviation and the faults in algebraic equation, it identifies the faults on-line through least squares estimate. This method can not only detect, isolate and identify faults for DAS, but also give the upper bound of the error of fault identification. The simulation results indicate that it can give satisfactory diagnostic results for both abrupt and incipient faults.
