A fault accommodation zone is a type of structure that is defined as regulating displacement and strain between faults structure.Increasing numbers of fault accommodation zones are being identified in graben basins,in...A fault accommodation zone is a type of structure that is defined as regulating displacement and strain between faults structure.Increasing numbers of fault accommodation zones are being identified in graben basins,indicating the potential exploration target and petroleum accumulation areas.This study aims to analyze the formation mechanism and development of fault accommodation zones under combined stress by a numerical simulation method considering geomechanical modeling.Using three-dimensional(3-D)seismic interpretation and fractal dimension method,exampled with the Dongxin fault zone,the fault activity and fault combination pattern were conducted to quantitatively characterize the activity difference in fault accommodation zones.Combined with mechanical experiment test,a geomehcanical model was established for fault accommodation zones in a graben basin.Integrating the paleostress numerical simulations and structural physical simulation experiment,the developmental characteristics and genetic mechanism of fault accommodation zones were summarized.Influenced by multi movements and combined stresses,three significant tectonic evolution stages of the Dongxing Fault Zone(DXFZ)were distinguished:During the E_(s)^(3)sedimentary period,the large difference in the stress,strain,and rupture distribution in various faults were significant,and this stage was the key generation period for the prototype of the DXFZ,including the FAZ between large-scale faults.During the E_(s)^(2)sedimentary period,the EW-trending symmetric with opposite dipping normal faults and the NE-SW trending faults with large scale were furtherly developed.The junction area of two secondary normal faults were prone to be ruptured,performing significant period for inheriting and developing characteristics of fault accommodation zones.During the Es1 sedimentary period,the high-order faults in the DXFZ exhibited the obvious fault depressions and strike-slip activity,and the fault accommodation zones were furtherly inherited and developed.This stage was the molded and formative period of the FAZ,the low-order faults,and the depression in the DXFZ.展开更多
In the capacity planning of hydro-wind-solar power systems(CPHPS),it is crucial to use flexible hydropower to complement the variable wind-solar power.Hydropower units must be operated such that they avoid specific re...In the capacity planning of hydro-wind-solar power systems(CPHPS),it is crucial to use flexible hydropower to complement the variable wind-solar power.Hydropower units must be operated such that they avoid specific restricted operation zones,that is,forbidden zones(FZs),to avoid the risks associated with hydropower unit vibration.FZs cause limitations in terms of both the hydropower generation and flexible regulation in the hydro-wind-solar power systems.Therefore,it is essential to consider FZs when determining the optimal wind-solar power capacity that can be compensated by the hydropower.This study presents a mathematical model that incorporates the FZ constraints into the CPHPS problem.Firstly,the FZs of the hydropower units are converted into those of the hydropower plants based on set theory.Secondly,a mathematical model was formulated for the CPHPS,which couples the FZ constraints of hydropower plants with other operational constraints(e.g.,power balance constraints,new energy consumption limits,and hydropower generation functions).Thirdly,dynamic programming with successive approximations is employed to solve the proposed model.Lastly,case studies were conducted on the hydro-wind-solar system of the Qingshui River to demonstrate the effectiveness of the proposed model.展开更多
Based on 2D and 3D seismic data and well logging data,this paper studies the distribution of well-seismic stratigraphic filling and shoal controlled reservoirs of Upper Cambrian Xixiangchi Formation in the south slope...Based on 2D and 3D seismic data and well logging data,this paper studies the distribution of well-seismic stratigraphic filling and shoal controlled reservoirs of Upper Cambrian Xixiangchi Formation in the south slope of Leshan-Longnüsi paleouplift in the Sichuan Basin,to reveal the genetic relationship between stratigraphic filling,paleogeomorphology and large-scale grain shoal.(1)The Xixiangchi Formation in the study area is overlapped and filled gradually to the Leshan-Longnüsi paleouplift,but gets thin sharply due to truncation only near the denudation pinch-out line of the paleouplift.Two overlap slope break belts and one erosion slope break belt are identified,and the Xixiangchi Formation is divided into 4 members from bottom to top.(2)The filling pattern of the overlapping at the base and erosion at the top indicates that the thickness of Xixiangchi Formation can reflect the pre-depositional paleogeomorphology,and reveals that the studied area has a monoclinal geomorphic feature of plunging to southeast and being controlled by multistage slope break belts.(3)The large-scale grain shoals and shoal controlled reservoirs are developed longitudinally in the third and fourth members of the Xixiangchi Formation,and laterally in the vicinity of the multistage overlap slope break belts.(4)Overlap slope break belts are closely related to northwest trending reverse faults.The western margin of the South China Plate converging with the Qiangtang-Himalaya massif in the middle-late Cambrian resulted in the rapid uplift of the northwestern margin of the Yangtze Plate and expanding toward southeast,leaving gradually plunging multistage slope breaks and large-scale northeast grain shoal reservoir belts.Considering oil and gas test results,it is predicted that the favorable exploration zone of the grain shoal controlled reservoirs covers an area of 3340 km^(2).展开更多
There are three abnormally high porosity zones developed in buried Paleogene nearshore subaqueous fan and sublacustrine fan clastic＇reservoirs at 2,800-3,200 m, 3,250-3,700 m and 3,900- 4,400 m, respectively, within ...There are three abnormally high porosity zones developed in buried Paleogene nearshore subaqueous fan and sublacustrine fan clastic＇reservoirs at 2,800-3,200 m, 3,250-3,700 m and 3,900- 4,400 m, respectively, within the Shengtuo area of the Dongying Sag. Here the porosity of reservoirs buried deeper than 4,000 m can still be greater than 20%. Investigation of these three abnormally high porosity （AHP） zones in the 3rd to 4th member of the Paleogene Shahejie Formation in the Shengtuo area was carried out with utilization of core observation, thin section identification, SEM observation, image analysis, core physical property testing and other technical methods. The results show that, the AHP zones in 2,800-3,200 m and 3,250-3,700 m are visible pores primary AHP zones dominated by significant primary intergranular pores （more than 50% of the total porosity）, while secondary pores and micropores in authigenic clays may develop in some reservoirs. AHP reservoirs in the AHP zone of 3,900-4,400 m are dominated by micropores in matrix, visible pores are mainly grain dissolution pores but with low absolute content （〈 1%）, so this zone belongs to the micropores primary AHP zone. The genesis of the three AHP zones was studied to distinguish between porosity enhancement and porosity preservation. Our research shows that, in deeply buried clastic reservoirs in the Shengtuo area, mineral dissolution occurred in a relatively closed diagenetic system with high temperature and high salinity. Reservoir rocks underwent extensive feldspar dissolution, while detrital carbonate grains and carbonate cements show no evidence of extensive dissolution. Although significant feldspar dissolution pores developed, feldspar dissolution enhanced porosity only a little due to the precipitation of almost isovolumetric dissolution products in the nearby primary intergranular pores in forms of authigenic clays and quartz cements. Net enhanced porosity originating from feldspar dissolution is generally less than 0.25%. Thus, the subsurface dissolution has little impact on the mid-deep buried high porosity reservoirs. Reservoirs in braided channels of middle fans in sublacustrine fans and reservoirs in the middle-front of fan bodies of nearshore subaqueous fans provide the basis for the development of AHP zones. The shallow development of fluid overpressure and early hydrocarbon emplacement have effectively retarded compaction and carbonate cementation, so that the high porosity in the superficial layers is preserved in the mid-deep layers. These are the main controlling factors in the development of AHP zones.展开更多
High-quality reservoirs occur in the middle-shallow horizons of the northern Songliao Basin. The distribution and genesis of their anomalously high porosity zones were studied using measured porosities, examination of...High-quality reservoirs occur in the middle-shallow horizons of the northern Songliao Basin. The distribution and genesis of their anomalously high porosity zones were studied using measured porosities, examination of ordinary thin sections and blue epoxy resin-impregnated thin sections and by SEM. The results show that there are three anomalously high porosity zones at the depth of 450-900 m, 1,300-1,900 m, 2,050-2,350 m respectively, named zone i, zone ii and zone iii from top to bottom. Horizontally, zone i and zone ii are distributed all over the basin except in the Southeastern Uplift, while zone iii is only distributed in the Central Depression. Zone i was formed by meteoric water leaching as well as organic acid dissolution. Zones ii and iii were dominantly formed by organic acid dissolution. Additionally, clay mineral transformation generating H＋ and hydrocarbon emplacement retarding the cementation of sandstones are also important for the formation of zones ii and iii.展开更多
On detailed analysis basis of spontaneous coal combustion for the three zones in mine goaf,we use O2 and CO concentrations to divide the three zones of the coal combustion.Through our experiment,we selected a typical ...On detailed analysis basis of spontaneous coal combustion for the three zones in mine goaf,we use O2 and CO concentrations to divide the three zones of the coal combustion.Through our experiment,we selected a typical working face and focused on the changes in gas concentrations.In order to overcome establishment limitations of actual layout location and underground conditions in a mine goaf,we based our observations on the three zones,combined them with numerical simulation,described the distribution and the changes in O2 and CO concentrations during the coal spontaneous combustion in the goaf,which provided us with an understanding of the distribution of coal spontaneous combustion in the three zones in the form of maps.Essentially,our study summarizes the changes of O2and CO concentrations in the entire goaf and shows them to be in agreement with our observations at the scene.The study shows that it is feasible to divide the three zones,given our comprehensive targets of O2,CO and our numerical simulation.This method avoids the limitation of dividing the three zones with a single target and the likely errors of observations at the scene.In addition,the method offers a basis for optimizing measures of fre-fghting with important and practical effects.展开更多
Direct partial oxidation of methane to methanol was investigated in a specially designed reactor. Methanol yield of about 7%-8% was obtained in gas phase partial oxidation. It was proposed that the reactor could be di...Direct partial oxidation of methane to methanol was investigated in a specially designed reactor. Methanol yield of about 7%-8% was obtained in gas phase partial oxidation. It was proposed that the reactor could be divided into three reaction zones, namely pre-reaction zone, fierce reaction zone, and post-reaction zone, when the temperature was high enough to initiate a reaction. The oxidation of methane proceeded and was completed mostly in the fierce reaction zone. When the reactant mixture entered the post-reaction zone, only a small amount of produced methanol would bring about secondary reactions, because molecular oxygen had been exhausted in the fierce reaction zone. A catalyst, if necessary, should be placed either in the pre-reaction zone, to initiate a partial oxidation reaction at a lower temperature, or in the fierce reaction zone to control the homogeneous free radical reaction.展开更多
This paper presents an overview of petrophysical research and exploration achievements of low resistivity pay （LRP） zone by well logs in China. It includes geological characteristics and characteristics of well log ...This paper presents an overview of petrophysical research and exploration achievements of low resistivity pay （LRP） zone by well logs in China. It includes geological characteristics and characteristics of well log response of the low resistivity pay zones discovered and evaluated in recent years, as well as the problems in recognizing and evaluating low resistivity pay zones by well logs. The research areas mainly include the Neogene formations in the Bohai Bay Basin, the Triassic formations in the northern Tarim Basin and the Cretaceous formations in the Junggar Basin, The petrophysical research concerning recognition and evaluation of the low resistivity pays, based on their genetic types, is introduced in this paper.展开更多
Most major oil zones in the Daqing Oilfield have reached a later,high water cut stage,but oil recovery is still only approximately 35%,and 50%of reserves remain to be recovered.The remaining oil is primarily distribut...Most major oil zones in the Daqing Oilfield have reached a later,high water cut stage,but oil recovery is still only approximately 35%,and 50%of reserves remain to be recovered.The remaining oil is primarily distributed at the edge of faults,in poor sand bodies,and in insufficiently injected and produced areas.Therefore,the edge of faults is a major target for remaining oil enrichment and potential tapping.Based on the dynamic change of production from development wells determined by the injection-recovery relationship at the edge of faults,we analyzed the control of structural features of faults on remaining oil enrichment at the edge.Our results show that the macroscopic structural features and their geometric relationship with sand bodies controlled remaining oil enrichment zones like the edges of NNE-striking faults,the footwalls of antithetic faults,the hard linkage segments（two faults had linked together with each other to form a bigger through-going fault）,the tips of faults,and the oblique anticlines of soft linkages.Fault edges formed two types of forward microamplitude structures：（1） the tilted uplift of footwalls controlled by inverse fault sections and（2） the hanging-wall horizontal anticlines controlled by synthetic fault points.The remaining oil distribution was controlled by microamplitude structures.Consequently,such zones as the tilted uplift of the footwall of the NNW-striking antithetic faults with a fault throw larger than 40 m,the hard linkage segments,the tips of faults,and the oblique anticlines of soft linkage were favorable for tapping the remaining oil potential.Multi-target directional drilling was used for remaining oil development at fault edges.Reasonable fault spacing was determined on the basis of fault combinations and width of the shattered zone.Well core and log data revealed that the width of the shattered zone on the side of the fault core was less than 15 m in general;therefore,the distance from a fault to the development target should be larger than 15 m.Vertically segmented growth faults should take the separation of the lateral overlap of faults into account.Therefore,the safe distance of remaining oil well deployment at the fault edge should be larger than the sum of the width of shattered zone in faults and the separation of growth faults by vertical segmentation.展开更多
Based on the outcrop survey,3D seismic data interpretation,drilling data analysis,the structural patterns and distribution of fault damage zones in carbonate strata of Tazhong Paleo-uplift were established to reveal t...Based on the outcrop survey,3D seismic data interpretation,drilling data analysis,the structural patterns and distribution of fault damage zones in carbonate strata of Tazhong Paleo-uplift were established to reveal the oil and gas enrichment law in the fault damage zones.The following findings were reached:(1)Through the filed survey,the fault damage zone system consists of fault core,damage zone with branch fault and fracture network.Affected by the active nature of the major faults,the fault damage zones differ in planar pattern and scale along the major faults.(2)3D seismic profiles reveal that there are three types of fault damage zones in carbonate strata in Tazhong paleo-uplift,strike-slip fault damage zones,thrust fault damage zones and superimposed fault damage zones.Featuring3 flowers and 3 root belts in vertical,the strike-slip fault damage zone can be subdivided into linear type,oblique type,feather type and horsetail type in plane.Thrust fault damage zones can be further divided into fault anticline type,anticline type and slope type.As the superimposition result of the above two kinds of fault damage zones,superimposed fault damage zones appear in three patterns,intersect type,encompassment type and penetrating type.(3)Cores from wells and geochemical data show oil and gas may migrate along the major fault and laterally.The feather type in strike-slip fault system,fault anticline type in thrust fault damage zone and intersect type in superimposed fault damage zone are possible sites for high production and efficiency wells.展开更多
In light of the possibility of reignition when unsealing the closed fire zones, the occurrence of reignition was simulated by a home-made experimental device, hydrogen variety rule from combustion to unsealing was ana...In light of the possibility of reignition when unsealing the closed fire zones, the occurrence of reignition was simulated by a home-made experimental device, hydrogen variety rule from combustion to unsealing was analyzed, the three-stage generation model of hydrogen during reignition in fire zone was put forward and the probability that hydrogen was taken as an indicator gas was discussed. The results show that: when fire zone is ready to unseal, which is filled with hydrogen at a high concentration, it is more prone to reignite.展开更多
Although the analysis of the microcosmic mechanism for low-resistivity oil zones has received much attention in China, the intrinsic relationship between low-resistivity oil zones and geological background is still un...Although the analysis of the microcosmic mechanism for low-resistivity oil zones has received much attention in China, the intrinsic relationship between low-resistivity oil zones and geological background is still under-developed. Based on the geology and logging analysis, we redefine low-resistivity oil zones. According to their genesis, low-resis- tivity oil zones can be distinguished as five different classes: low-resistivity oil zones formed by tectonic settings, by depositional settings, by diagenetic settings, by invaded settings and those which are formed by the compounding geneses respectively. We make the following observations from this study on the definition and classification of low-resistivity oil zones: 1) A low-resistivity oil reservoir has macroscopic and microscopic unity. 2) The genesis of low-resistivity oil zones varies with the type of petroliferous basin. 3) Some low-resistivity oil zones can be forecasted based on the geological study results. 4) The results in this paper suggest that well logging information is generated from two cause mechanisms, the geophysical factors and the geological setting. Future studies on the geological background cause mechanism and the theory of well logging information will enrich the theory of logging geology and improve the ability to forecast oil zones.展开更多
In recent years, as the exploration practices extend into more complicated formations, conventional well log interpretation has often shown its inaccuracy and limitations in identifying hydrocarbons. The Permian Wuton...In recent years, as the exploration practices extend into more complicated formations, conventional well log interpretation has often shown its inaccuracy and limitations in identifying hydrocarbons. The Permian Wutonggou Formation hosts typical clastic reservoirs in the Eastern Junggar Basin. The sophisticated lithology characteristics cause complex pore structures and fluid properties. These all finally cause low well testing agreement rate using conventional methods. Eleven years＇ recent statistics show that 12 out of 15 water layers have been incorrectly identified as being oil or oil/water layers by conventional well log interpretation. This paper proposes a methodology called intelligent prediction and identification system （IPIS）. Firstly, parameters reflecting lithological, petrophysical and electrical responses which are greatly related to reservoir fluids have been selected carefully. They are shale content （Vsh）, numbered rock type （RN）, porosity （φ）, permeability （K）, true resistivity （RT） and spontaneous-potential （SP）. Secondly, Vsh, φ and K are predicted from well logs through artificial neural networks （ANNs）. Finally, all the six parameters are input into a neuro-fuzzy inference machine （NFIM） to get fluids identification results. Eighteen new layers of 145.3 m effective thickness were examined by IPIS. There is full agreement with well testing results. This shows the system＇s accuracy and effectiveness.展开更多
To predict the large-scale source rock and reservoir distribution in Cambrian subsalt formations(Upper Sinian to Mid-Cambrian)in the Tarim Basin,more than 502D seismic lines and 3D data volume acquired latest,22 wells...To predict the large-scale source rock and reservoir distribution in Cambrian subsalt formations(Upper Sinian to Mid-Cambrian)in the Tarim Basin,more than 502D seismic lines and 3D data volume acquired latest,22 wells and some out-crops around this area were used to study the tectonic-lithofacies paleogeography,define the distribution of large scale source rocks and reservoirs,and sort out favorable zones.(1)The basin experienced evolution from ramp to deep-water mud-rich ramp,low-gradient slope,weak rimmed to strong rimmed platform,and the differentiation in the platform was controlled by pre-Cambrian palaeo-rifts.(2)The Luonan-Yubei ancient rift controlled the distribution of source rocks in the Lower Cambrian Yuertusi Formation,and this rift together with the northern depression are the main source rock area.(3)There are three sets of large-scale reservoirs,the Upper Sinian Qigebulake Formation,the Lower Cambrian Xiaorbulake Formation and the Wu-songger Formation,and shoal-mounds,early dolomitization and multi-levels of unconformities controlled reservoir develop-ment.(4)Four favorable zones,the north slope of Tazhong,upper slope of Maigaiti area,Keping-Wensu periphery,and south slope of Tabei,were evaluated.Of them,the north slope of Tazhong is most likely to have exploration breakthrough;the south slope of Tabei is the best area for exploring the Upper Sinian large scale weathering crust dolomite;Maigaiti slope and Kep-ing-Wensu periphery area improved in exploration potentials significantly,and are worth prospecting faster.展开更多
Recent advances in on-board radar and missile capabilities,combined with individual payload limitations,have led to increased interest in the use of unmanned combat aerial vehicles(UCAVs)for cooperative occupation dur...Recent advances in on-board radar and missile capabilities,combined with individual payload limitations,have led to increased interest in the use of unmanned combat aerial vehicles(UCAVs)for cooperative occupation during beyond-visual-range(BVR)air combat.However,prior research on occupational decision-making in BVR air combat has mostly been limited to one-on-one scenarios.As such,this study presents a practical cooperative occupation decision-making methodology for use with multiple UCAVs.The weapon engagement zone(WEZ)and combat geometry were first used to develop an advantage function for situational assessment of one-on-one engagement.An encircling advantage function was then designed to represent the cooperation of UCAVs,thereby establishing a cooperative occupation model.The corresponding objective function was derived from the one-on-one engagement advantage function and the encircling advantage function.The resulting model exhibited similarities to a mixed-integer nonlinear programming(MINLP)problem.As such,an improved discrete particle swarm optimization(DPSO)algorithm was used to identify a solution.The occupation process was then converted into a formation switching task as part of the cooperative occupation model.A series of simulations were conducted to verify occupational solutions in varying situations,including two-on-two engagement.Simulated results showed these solutions varied with initial conditions and weighting coefficients.This occupation process,based on formation switching,effectively demonstrates the viability of the proposed technique.These cooperative occupation results could provide a theoretical framework for subsequent research in cooperative BVR air combat.展开更多
Residual oil zones(ROZs)have large potential for CO_(2)enhanced oil recovery(EOR)and geologic storage.During CO_(2)injection,the migration of CO_(2)in ROZs controls the performance of both EOR and storage.However,it h...Residual oil zones(ROZs)have large potential for CO_(2)enhanced oil recovery(EOR)and geologic storage.During CO_(2)injection,the migration of CO_(2)in ROZs controls the performance of both EOR and storage.However,it has not been clearly visualized and understood that how geological heterogeneity factors control the transport of CO_(2)in ROZs.In this study,the oil recovery performance and geologic storage potential during continuous CO_(2)injection in a representative ROZ are studied based on geostatistical modelling and high-fidelity three-phase flow simulation.We examined the influence of autocorrelation length of permeability,global heterogeneity(DykstraeParsons coefficient),and permeability anisotropy on cumulative oil recovery and CO_(2)retention fraction.Simulation results indicate that,as the permeability autocorrelation length increases,the cumulative oil recovery and CO_(2)storage efficiency decrease.This results from the accelerated migration of CO_(2)along high permeability zones(i.e.,gas channeling).The increase in global heterogeneity and permeability anisotropies can lead to low oil recovery and poor CO_(2)sequestration performance,depending on the degree of CO_(2)channeling.The net utilization ratio of CO_(2)(CO_(2)retained/oil produced)unfavorably increases with both autocorrelation length and Dykstra eParsons coefficient,but decreases with the increase in kv/kh.Such a decrease is attributed to enlarged swept volume induced by gravity override.The study provides important implications for fieldscale CO_(2)EOR and storage applications in ROZs.展开更多
In the early exploration of many oilfields,low-resistivity-low-contrast(LRLC)pay zones are easily overlooked due to the resistivity similarity to the water zones.Existing identification methods are model-driven and ca...In the early exploration of many oilfields,low-resistivity-low-contrast(LRLC)pay zones are easily overlooked due to the resistivity similarity to the water zones.Existing identification methods are model-driven and cannot yield satisfactory results when the causes of LRLC pay zones are complicated.In this study,after analyzing a large number of core samples,main causes of LRLC pay zones in the study area are discerned,which include complex distribution of formation water salinity,high irreducible water saturation due to micropores,and high shale volume.Moreover,different oil testing layers may have different causes of LRLC pay zones.As a result,in addition to the well log data of oil testing layers,well log data of adjacent shale layers are also added to the original dataset as reference data.The densitybased spatial clustering algorithm with noise(DBSCAN)is used to cluster the original dataset into 49 clusters.A new dataset is ultimately projected into a feature space with 49 dimensions.The new dataset and oil testing results are respectively treated as input and output to train the multi-layer perceptron(MLP).A total of 3192 samples are used for stratified 8-fold cross-validation,and the accuracy of the MLP is found to be 85.53%.展开更多
Based on a set of experimental databases of turbulent boundary layers obtained from particle image velocimetry in the streamwise-wall-normal plane at friction-velocity-based Reynolds number Reτ=612,the influence of u...Based on a set of experimental databases of turbulent boundary layers obtained from particle image velocimetry in the streamwise-wall-normal plane at friction-velocity-based Reynolds number Reτ=612,the influence of uniform momentum zones(UMZs)on the skin-friction drag is investigated.The skin-friction drag is measured by the single-pixel ensemble correlation method.The results show that the velocity fields with the number of UMZs larger than the mean value have a relatively low skin-friction drag,while the velocity fields with the number of UMZs less than the mean value have a relatively high skin-friction drag.By analyzing the statistical characteristics of UMZs,the dynamic correlation between the UMZs and skin-friction drag is explored.The velocity fields with a low number of UMZs present a sweep event.These sweep motions intensify the small-scale Reynolds shear stress in the near-wall region by modulation effects.The enhancement of small-scale Reynolds shear stress is the direct reason for the high skin-friction drag.Increasing the proportion of velocity fields with high UMZs amount may be a direction to reduce the skin-friction drag within the TBL.展开更多
The main aim of this research is to get a better knowledge and understanding of the micro-scale oscillatory networks behavior in the solid propellants reactionary zones. Fundamental understanding of the micro-and nano...The main aim of this research is to get a better knowledge and understanding of the micro-scale oscillatory networks behavior in the solid propellants reactionary zones. Fundamental understanding of the micro-and nano-scale combustion mechanisms is essential to the development and further improvement of the next-generation technologies for extreme control of the solid propellant thrust. Both experiments and theory confirm that the micro-and nano-scale oscillatory networks excitation in the solid propellants reactionary zones is a rather universal phenomenon. In accordance with our concept,the micro-and nano-scale structures form both the fractal and self-organized wave patterns in the solid propellants reactionary zones. Control by the shape, the sizes and spacial orientation of the wave patterns allows manipulate by the energy exchange and release in the reactionary zones. A novel strategy for enhanced extreme thrust control in solid propulsion systems are based on manipulation by selforganization of the micro-and nano-scale oscillatory networks and self-organized patterns formation in the reactionary zones with use of the system of acoustic waves and electro-magnetic fields, generated by special kind of ring-shaped electric discharges along with resonance laser radiation. Application of special kind of the ring-shaped electric discharges demands the minimum expenses of energy and opens prospects for almost inertia-free control by combustion processes. Nano-sized additives will enhance self-organizing and self-synchronization of the micro-and nano-scale oscillatory networks on the nanometer scale. Suggested novel strategy opens the door for completely new ways for enhanced extreme thrust control of the solid propulsion systems.展开更多
基金This research was supported by the Major Scientific and Technological Projects of CNPC under grant ZD2019-183-006the National Natural Science Foundation of China(42072234).The authors would like to appreciate all the people,who supported the data,testing,and analyses.Many thanks to the anonymous reviewers,whose comments improve the quality of our manuscript.
文摘A fault accommodation zone is a type of structure that is defined as regulating displacement and strain between faults structure.Increasing numbers of fault accommodation zones are being identified in graben basins,indicating the potential exploration target and petroleum accumulation areas.This study aims to analyze the formation mechanism and development of fault accommodation zones under combined stress by a numerical simulation method considering geomechanical modeling.Using three-dimensional(3-D)seismic interpretation and fractal dimension method,exampled with the Dongxin fault zone,the fault activity and fault combination pattern were conducted to quantitatively characterize the activity difference in fault accommodation zones.Combined with mechanical experiment test,a geomehcanical model was established for fault accommodation zones in a graben basin.Integrating the paleostress numerical simulations and structural physical simulation experiment,the developmental characteristics and genetic mechanism of fault accommodation zones were summarized.Influenced by multi movements and combined stresses,three significant tectonic evolution stages of the Dongxing Fault Zone(DXFZ)were distinguished:During the E_(s)^(3)sedimentary period,the large difference in the stress,strain,and rupture distribution in various faults were significant,and this stage was the key generation period for the prototype of the DXFZ,including the FAZ between large-scale faults.During the E_(s)^(2)sedimentary period,the EW-trending symmetric with opposite dipping normal faults and the NE-SW trending faults with large scale were furtherly developed.The junction area of two secondary normal faults were prone to be ruptured,performing significant period for inheriting and developing characteristics of fault accommodation zones.During the Es1 sedimentary period,the high-order faults in the DXFZ exhibited the obvious fault depressions and strike-slip activity,and the fault accommodation zones were furtherly inherited and developed.This stage was the molded and formative period of the FAZ,the low-order faults,and the depression in the DXFZ.
文摘In the capacity planning of hydro-wind-solar power systems(CPHPS),it is crucial to use flexible hydropower to complement the variable wind-solar power.Hydropower units must be operated such that they avoid specific restricted operation zones,that is,forbidden zones(FZs),to avoid the risks associated with hydropower unit vibration.FZs cause limitations in terms of both the hydropower generation and flexible regulation in the hydro-wind-solar power systems.Therefore,it is essential to consider FZs when determining the optimal wind-solar power capacity that can be compensated by the hydropower.This study presents a mathematical model that incorporates the FZ constraints into the CPHPS problem.Firstly,the FZs of the hydropower units are converted into those of the hydropower plants based on set theory.Secondly,a mathematical model was formulated for the CPHPS,which couples the FZ constraints of hydropower plants with other operational constraints(e.g.,power balance constraints,new energy consumption limits,and hydropower generation functions).Thirdly,dynamic programming with successive approximations is employed to solve the proposed model.Lastly,case studies were conducted on the hydro-wind-solar system of the Qingshui River to demonstrate the effectiveness of the proposed model.
基金Supported by the Cooperation Project of China National Natural Science Foundation and Petro China(U23B20154)Science and Technology Cooperation Project of Petro China and Southwest Petroleum University(2020CX010000)。
文摘Based on 2D and 3D seismic data and well logging data,this paper studies the distribution of well-seismic stratigraphic filling and shoal controlled reservoirs of Upper Cambrian Xixiangchi Formation in the south slope of Leshan-Longnüsi paleouplift in the Sichuan Basin,to reveal the genetic relationship between stratigraphic filling,paleogeomorphology and large-scale grain shoal.(1)The Xixiangchi Formation in the study area is overlapped and filled gradually to the Leshan-Longnüsi paleouplift,but gets thin sharply due to truncation only near the denudation pinch-out line of the paleouplift.Two overlap slope break belts and one erosion slope break belt are identified,and the Xixiangchi Formation is divided into 4 members from bottom to top.(2)The filling pattern of the overlapping at the base and erosion at the top indicates that the thickness of Xixiangchi Formation can reflect the pre-depositional paleogeomorphology,and reveals that the studied area has a monoclinal geomorphic feature of plunging to southeast and being controlled by multistage slope break belts.(3)The large-scale grain shoals and shoal controlled reservoirs are developed longitudinally in the third and fourth members of the Xixiangchi Formation,and laterally in the vicinity of the multistage overlap slope break belts.(4)Overlap slope break belts are closely related to northwest trending reverse faults.The western margin of the South China Plate converging with the Qiangtang-Himalaya massif in the middle-late Cambrian resulted in the rapid uplift of the northwestern margin of the Yangtze Plate and expanding toward southeast,leaving gradually plunging multistage slope breaks and large-scale northeast grain shoal reservoir belts.Considering oil and gas test results,it is predicted that the favorable exploration zone of the grain shoal controlled reservoirs covers an area of 3340 km^(2).
基金financially supported by the National Natural Science Foundation of China (No. U1262203, No. 41102058)a National Science and Technology Special Grant (No. 2011ZX05006-003)Foundation for the Author of National Excellent Doctoral Dissertation of China
文摘There are three abnormally high porosity zones developed in buried Paleogene nearshore subaqueous fan and sublacustrine fan clastic＇reservoirs at 2,800-3,200 m, 3,250-3,700 m and 3,900- 4,400 m, respectively, within the Shengtuo area of the Dongying Sag. Here the porosity of reservoirs buried deeper than 4,000 m can still be greater than 20%. Investigation of these three abnormally high porosity （AHP） zones in the 3rd to 4th member of the Paleogene Shahejie Formation in the Shengtuo area was carried out with utilization of core observation, thin section identification, SEM observation, image analysis, core physical property testing and other technical methods. The results show that, the AHP zones in 2,800-3,200 m and 3,250-3,700 m are visible pores primary AHP zones dominated by significant primary intergranular pores （more than 50% of the total porosity）, while secondary pores and micropores in authigenic clays may develop in some reservoirs. AHP reservoirs in the AHP zone of 3,900-4,400 m are dominated by micropores in matrix, visible pores are mainly grain dissolution pores but with low absolute content （〈 1%）, so this zone belongs to the micropores primary AHP zone. The genesis of the three AHP zones was studied to distinguish between porosity enhancement and porosity preservation. Our research shows that, in deeply buried clastic reservoirs in the Shengtuo area, mineral dissolution occurred in a relatively closed diagenetic system with high temperature and high salinity. Reservoir rocks underwent extensive feldspar dissolution, while detrital carbonate grains and carbonate cements show no evidence of extensive dissolution. Although significant feldspar dissolution pores developed, feldspar dissolution enhanced porosity only a little due to the precipitation of almost isovolumetric dissolution products in the nearby primary intergranular pores in forms of authigenic clays and quartz cements. Net enhanced porosity originating from feldspar dissolution is generally less than 0.25%. Thus, the subsurface dissolution has little impact on the mid-deep buried high porosity reservoirs. Reservoirs in braided channels of middle fans in sublacustrine fans and reservoirs in the middle-front of fan bodies of nearshore subaqueous fans provide the basis for the development of AHP zones. The shallow development of fluid overpressure and early hydrocarbon emplacement have effectively retarded compaction and carbonate cementation, so that the high porosity in the superficial layers is preserved in the mid-deep layers. These are the main controlling factors in the development of AHP zones.
基金supported by the National Natural ScienceFoundation (Grant No. 40872076)
文摘High-quality reservoirs occur in the middle-shallow horizons of the northern Songliao Basin. The distribution and genesis of their anomalously high porosity zones were studied using measured porosities, examination of ordinary thin sections and blue epoxy resin-impregnated thin sections and by SEM. The results show that there are three anomalously high porosity zones at the depth of 450-900 m, 1,300-1,900 m, 2,050-2,350 m respectively, named zone i, zone ii and zone iii from top to bottom. Horizontally, zone i and zone ii are distributed all over the basin except in the Southeastern Uplift, while zone iii is only distributed in the Central Depression. Zone i was formed by meteoric water leaching as well as organic acid dissolution. Zones ii and iii were dominantly formed by organic acid dissolution. Additionally, clay mineral transformation generating H＋ and hydrocarbon emplacement retarding the cementation of sandstones are also important for the formation of zones ii and iii.
基金supported by the National Natural Science Foundation of China (Nos. 50974055 and 50906023)the Education Department of Hennan Province (No. 13A440333)
文摘On detailed analysis basis of spontaneous coal combustion for the three zones in mine goaf,we use O2 and CO concentrations to divide the three zones of the coal combustion.Through our experiment,we selected a typical working face and focused on the changes in gas concentrations.In order to overcome establishment limitations of actual layout location and underground conditions in a mine goaf,we based our observations on the three zones,combined them with numerical simulation,described the distribution and the changes in O2 and CO concentrations during the coal spontaneous combustion in the goaf,which provided us with an understanding of the distribution of coal spontaneous combustion in the three zones in the form of maps.Essentially,our study summarizes the changes of O2and CO concentrations in the entire goaf and shows them to be in agreement with our observations at the scene.The study shows that it is feasible to divide the three zones,given our comprehensive targets of O2,CO and our numerical simulation.This method avoids the limitation of dividing the three zones with a single target and the likely errors of observations at the scene.In addition,the method offers a basis for optimizing measures of fre-fghting with important and practical effects.
文摘Direct partial oxidation of methane to methanol was investigated in a specially designed reactor. Methanol yield of about 7%-8% was obtained in gas phase partial oxidation. It was proposed that the reactor could be divided into three reaction zones, namely pre-reaction zone, fierce reaction zone, and post-reaction zone, when the temperature was high enough to initiate a reaction. The oxidation of methane proceeded and was completed mostly in the fierce reaction zone. When the reactant mixture entered the post-reaction zone, only a small amount of produced methanol would bring about secondary reactions, because molecular oxygen had been exhausted in the fierce reaction zone. A catalyst, if necessary, should be placed either in the pre-reaction zone, to initiate a partial oxidation reaction at a lower temperature, or in the fierce reaction zone to control the homogeneous free radical reaction.
基金Supported by CNPC Innovation Foundation,Research Projects of PetroChina,Xinjiang and Tarim Oil Companies
文摘This paper presents an overview of petrophysical research and exploration achievements of low resistivity pay （LRP） zone by well logs in China. It includes geological characteristics and characteristics of well log response of the low resistivity pay zones discovered and evaluated in recent years, as well as the problems in recognizing and evaluating low resistivity pay zones by well logs. The research areas mainly include the Neogene formations in the Bohai Bay Basin, the Triassic formations in the northern Tarim Basin and the Cretaceous formations in the Junggar Basin, The petrophysical research concerning recognition and evaluation of the low resistivity pays, based on their genetic types, is introduced in this paper.
基金financial support from the Natural Science Foundation of China (Grant No. 41272151, 41472126)the Natural Science Foundation for Distinguished Young Scholars of Heilongjiang Province, China (Grant No. JC201304)+1 种基金the Joint Funds of the National Natural Science Foundation of China (Grant No. U1562214)the Program for Huabei Oilfield (Grant No. HBYT-CY5-2015-JS-127)
文摘Most major oil zones in the Daqing Oilfield have reached a later,high water cut stage,but oil recovery is still only approximately 35%,and 50%of reserves remain to be recovered.The remaining oil is primarily distributed at the edge of faults,in poor sand bodies,and in insufficiently injected and produced areas.Therefore,the edge of faults is a major target for remaining oil enrichment and potential tapping.Based on the dynamic change of production from development wells determined by the injection-recovery relationship at the edge of faults,we analyzed the control of structural features of faults on remaining oil enrichment at the edge.Our results show that the macroscopic structural features and their geometric relationship with sand bodies controlled remaining oil enrichment zones like the edges of NNE-striking faults,the footwalls of antithetic faults,the hard linkage segments（two faults had linked together with each other to form a bigger through-going fault）,the tips of faults,and the oblique anticlines of soft linkages.Fault edges formed two types of forward microamplitude structures：（1） the tilted uplift of footwalls controlled by inverse fault sections and（2） the hanging-wall horizontal anticlines controlled by synthetic fault points.The remaining oil distribution was controlled by microamplitude structures.Consequently,such zones as the tilted uplift of the footwall of the NNW-striking antithetic faults with a fault throw larger than 40 m,the hard linkage segments,the tips of faults,and the oblique anticlines of soft linkage were favorable for tapping the remaining oil potential.Multi-target directional drilling was used for remaining oil development at fault edges.Reasonable fault spacing was determined on the basis of fault combinations and width of the shattered zone.Well core and log data revealed that the width of the shattered zone on the side of the fault core was less than 15 m in general;therefore,the distance from a fault to the development target should be larger than 15 m.Vertically segmented growth faults should take the separation of the lateral overlap of faults into account.Therefore,the safe distance of remaining oil well deployment at the fault edge should be larger than the sum of the width of shattered zone in faults and the separation of growth faults by vertical segmentation.
基金Supported by the China National Science and Technology Major Project(2016ZX05004-004)
文摘Based on the outcrop survey,3D seismic data interpretation,drilling data analysis,the structural patterns and distribution of fault damage zones in carbonate strata of Tazhong Paleo-uplift were established to reveal the oil and gas enrichment law in the fault damage zones.The following findings were reached:(1)Through the filed survey,the fault damage zone system consists of fault core,damage zone with branch fault and fracture network.Affected by the active nature of the major faults,the fault damage zones differ in planar pattern and scale along the major faults.(2)3D seismic profiles reveal that there are three types of fault damage zones in carbonate strata in Tazhong paleo-uplift,strike-slip fault damage zones,thrust fault damage zones and superimposed fault damage zones.Featuring3 flowers and 3 root belts in vertical,the strike-slip fault damage zone can be subdivided into linear type,oblique type,feather type and horsetail type in plane.Thrust fault damage zones can be further divided into fault anticline type,anticline type and slope type.As the superimposition result of the above two kinds of fault damage zones,superimposed fault damage zones appear in three patterns,intersect type,encompassment type and penetrating type.(3)Cores from wells and geochemical data show oil and gas may migrate along the major fault and laterally.The feather type in strike-slip fault system,fault anticline type in thrust fault damage zone and intersect type in superimposed fault damage zone are possible sites for high production and efficiency wells.
基金supported by the National Natural Science Foundation of China (No.50604014)the Program for New Century Excellent Talent Project(No.NCET-08-0838)the Research Fund of the State Key Laboratory of Coal Resources and Safe Mining,CUMT (No.09KF11)
文摘In light of the possibility of reignition when unsealing the closed fire zones, the occurrence of reignition was simulated by a home-made experimental device, hydrogen variety rule from combustion to unsealing was analyzed, the three-stage generation model of hydrogen during reignition in fire zone was put forward and the probability that hydrogen was taken as an indicator gas was discussed. The results show that: when fire zone is ready to unseal, which is filled with hydrogen at a high concentration, it is more prone to reignite.
文摘Although the analysis of the microcosmic mechanism for low-resistivity oil zones has received much attention in China, the intrinsic relationship between low-resistivity oil zones and geological background is still under-developed. Based on the geology and logging analysis, we redefine low-resistivity oil zones. According to their genesis, low-resis- tivity oil zones can be distinguished as five different classes: low-resistivity oil zones formed by tectonic settings, by depositional settings, by diagenetic settings, by invaded settings and those which are formed by the compounding geneses respectively. We make the following observations from this study on the definition and classification of low-resistivity oil zones: 1) A low-resistivity oil reservoir has macroscopic and microscopic unity. 2) The genesis of low-resistivity oil zones varies with the type of petroliferous basin. 3) Some low-resistivity oil zones can be forecasted based on the geological study results. 4) The results in this paper suggest that well logging information is generated from two cause mechanisms, the geophysical factors and the geological setting. Future studies on the geological background cause mechanism and the theory of well logging information will enrich the theory of logging geology and improve the ability to forecast oil zones.
基金financially supported by the National Science and Technology Major Demonstration Project 19 (2011ZX05062-008)
文摘In recent years, as the exploration practices extend into more complicated formations, conventional well log interpretation has often shown its inaccuracy and limitations in identifying hydrocarbons. The Permian Wutonggou Formation hosts typical clastic reservoirs in the Eastern Junggar Basin. The sophisticated lithology characteristics cause complex pore structures and fluid properties. These all finally cause low well testing agreement rate using conventional methods. Eleven years＇ recent statistics show that 12 out of 15 water layers have been incorrectly identified as being oil or oil/water layers by conventional well log interpretation. This paper proposes a methodology called intelligent prediction and identification system （IPIS）. Firstly, parameters reflecting lithological, petrophysical and electrical responses which are greatly related to reservoir fluids have been selected carefully. They are shale content （Vsh）, numbered rock type （RN）, porosity （φ）, permeability （K）, true resistivity （RT） and spontaneous-potential （SP）. Secondly, Vsh, φ and K are predicted from well logs through artificial neural networks （ANNs）. Finally, all the six parameters are input into a neuro-fuzzy inference machine （NFIM） to get fluids identification results. Eighteen new layers of 145.3 m effective thickness were examined by IPIS. There is full agreement with well testing results. This shows the system＇s accuracy and effectiveness.
基金Supported by the China National Science and Technology Major Project(2016ZX05004-002)PetroChina Science and Technology Major Project(2021DJ0501)。
文摘To predict the large-scale source rock and reservoir distribution in Cambrian subsalt formations(Upper Sinian to Mid-Cambrian)in the Tarim Basin,more than 502D seismic lines and 3D data volume acquired latest,22 wells and some out-crops around this area were used to study the tectonic-lithofacies paleogeography,define the distribution of large scale source rocks and reservoirs,and sort out favorable zones.(1)The basin experienced evolution from ramp to deep-water mud-rich ramp,low-gradient slope,weak rimmed to strong rimmed platform,and the differentiation in the platform was controlled by pre-Cambrian palaeo-rifts.(2)The Luonan-Yubei ancient rift controlled the distribution of source rocks in the Lower Cambrian Yuertusi Formation,and this rift together with the northern depression are the main source rock area.(3)There are three sets of large-scale reservoirs,the Upper Sinian Qigebulake Formation,the Lower Cambrian Xiaorbulake Formation and the Wu-songger Formation,and shoal-mounds,early dolomitization and multi-levels of unconformities controlled reservoir develop-ment.(4)Four favorable zones,the north slope of Tazhong,upper slope of Maigaiti area,Keping-Wensu periphery,and south slope of Tabei,were evaluated.Of them,the north slope of Tazhong is most likely to have exploration breakthrough;the south slope of Tabei is the best area for exploring the Upper Sinian large scale weathering crust dolomite;Maigaiti slope and Kep-ing-Wensu periphery area improved in exploration potentials significantly,and are worth prospecting faster.
基金supported by the National Natural Science Foundation of China(No.61573286)the Aeronautical Science Foundation of China(No.20180753006)+2 种基金the Fundamental Research Funds for the Central Universities(3102019ZDHKY07)the Natural Science Foundation of Shaanxi Province(2020JQ-218)the Shaanxi Province Key Laboratory of Flight Control and Simulation Technology。
文摘Recent advances in on-board radar and missile capabilities,combined with individual payload limitations,have led to increased interest in the use of unmanned combat aerial vehicles(UCAVs)for cooperative occupation during beyond-visual-range(BVR)air combat.However,prior research on occupational decision-making in BVR air combat has mostly been limited to one-on-one scenarios.As such,this study presents a practical cooperative occupation decision-making methodology for use with multiple UCAVs.The weapon engagement zone(WEZ)and combat geometry were first used to develop an advantage function for situational assessment of one-on-one engagement.An encircling advantage function was then designed to represent the cooperation of UCAVs,thereby establishing a cooperative occupation model.The corresponding objective function was derived from the one-on-one engagement advantage function and the encircling advantage function.The resulting model exhibited similarities to a mixed-integer nonlinear programming(MINLP)problem.As such,an improved discrete particle swarm optimization(DPSO)algorithm was used to identify a solution.The occupation process was then converted into a formation switching task as part of the cooperative occupation model.A series of simulations were conducted to verify occupational solutions in varying situations,including two-on-two engagement.Simulated results showed these solutions varied with initial conditions and weighting coefficients.This occupation process,based on formation switching,effectively demonstrates the viability of the proposed technique.These cooperative occupation results could provide a theoretical framework for subsequent research in cooperative BVR air combat.
基金the support from Science&Technology Department of Sichuan Province(Grant Nos.2021ZYCD004,2022YFSY0008,2022NSFSC1023)National Natural Science Foundation of China(Grant Nos.42102300,52204033)the Engineering Research Center of Geothermal Resources Development Technology and Equipment,Ministry of Education,Jilin University(Grant No.22003).
文摘Residual oil zones(ROZs)have large potential for CO_(2)enhanced oil recovery(EOR)and geologic storage.During CO_(2)injection,the migration of CO_(2)in ROZs controls the performance of both EOR and storage.However,it has not been clearly visualized and understood that how geological heterogeneity factors control the transport of CO_(2)in ROZs.In this study,the oil recovery performance and geologic storage potential during continuous CO_(2)injection in a representative ROZ are studied based on geostatistical modelling and high-fidelity three-phase flow simulation.We examined the influence of autocorrelation length of permeability,global heterogeneity(DykstraeParsons coefficient),and permeability anisotropy on cumulative oil recovery and CO_(2)retention fraction.Simulation results indicate that,as the permeability autocorrelation length increases,the cumulative oil recovery and CO_(2)storage efficiency decrease.This results from the accelerated migration of CO_(2)along high permeability zones(i.e.,gas channeling).The increase in global heterogeneity and permeability anisotropies can lead to low oil recovery and poor CO_(2)sequestration performance,depending on the degree of CO_(2)channeling.The net utilization ratio of CO_(2)(CO_(2)retained/oil produced)unfavorably increases with both autocorrelation length and Dykstra eParsons coefficient,but decreases with the increase in kv/kh.Such a decrease is attributed to enlarged swept volume induced by gravity override.The study provides important implications for fieldscale CO_(2)EOR and storage applications in ROZs.
基金funded by the Strategic Cooperation Technology Projects of CNPC and CUPB(ZLZX2020-03)
文摘In the early exploration of many oilfields,low-resistivity-low-contrast(LRLC)pay zones are easily overlooked due to the resistivity similarity to the water zones.Existing identification methods are model-driven and cannot yield satisfactory results when the causes of LRLC pay zones are complicated.In this study,after analyzing a large number of core samples,main causes of LRLC pay zones in the study area are discerned,which include complex distribution of formation water salinity,high irreducible water saturation due to micropores,and high shale volume.Moreover,different oil testing layers may have different causes of LRLC pay zones.As a result,in addition to the well log data of oil testing layers,well log data of adjacent shale layers are also added to the original dataset as reference data.The densitybased spatial clustering algorithm with noise(DBSCAN)is used to cluster the original dataset into 49 clusters.A new dataset is ultimately projected into a feature space with 49 dimensions.The new dataset and oil testing results are respectively treated as input and output to train the multi-layer perceptron(MLP).A total of 3192 samples are used for stratified 8-fold cross-validation,and the accuracy of the MLP is found to be 85.53%.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11732010,11972251,11872272,11902218,and 11802195)the National Key R&D Program of China(Grant No.2018YFC0705300).
文摘Based on a set of experimental databases of turbulent boundary layers obtained from particle image velocimetry in the streamwise-wall-normal plane at friction-velocity-based Reynolds number Reτ=612,the influence of uniform momentum zones(UMZs)on the skin-friction drag is investigated.The skin-friction drag is measured by the single-pixel ensemble correlation method.The results show that the velocity fields with the number of UMZs larger than the mean value have a relatively low skin-friction drag,while the velocity fields with the number of UMZs less than the mean value have a relatively high skin-friction drag.By analyzing the statistical characteristics of UMZs,the dynamic correlation between the UMZs and skin-friction drag is explored.The velocity fields with a low number of UMZs present a sweep event.These sweep motions intensify the small-scale Reynolds shear stress in the near-wall region by modulation effects.The enhancement of small-scale Reynolds shear stress is the direct reason for the high skin-friction drag.Increasing the proportion of velocity fields with high UMZs amount may be a direction to reduce the skin-friction drag within the TBL.
基金supported by the Western-Caucasus Research Center
文摘The main aim of this research is to get a better knowledge and understanding of the micro-scale oscillatory networks behavior in the solid propellants reactionary zones. Fundamental understanding of the micro-and nano-scale combustion mechanisms is essential to the development and further improvement of the next-generation technologies for extreme control of the solid propellant thrust. Both experiments and theory confirm that the micro-and nano-scale oscillatory networks excitation in the solid propellants reactionary zones is a rather universal phenomenon. In accordance with our concept,the micro-and nano-scale structures form both the fractal and self-organized wave patterns in the solid propellants reactionary zones. Control by the shape, the sizes and spacial orientation of the wave patterns allows manipulate by the energy exchange and release in the reactionary zones. A novel strategy for enhanced extreme thrust control in solid propulsion systems are based on manipulation by selforganization of the micro-and nano-scale oscillatory networks and self-organized patterns formation in the reactionary zones with use of the system of acoustic waves and electro-magnetic fields, generated by special kind of ring-shaped electric discharges along with resonance laser radiation. Application of special kind of the ring-shaped electric discharges demands the minimum expenses of energy and opens prospects for almost inertia-free control by combustion processes. Nano-sized additives will enhance self-organizing and self-synchronization of the micro-and nano-scale oscillatory networks on the nanometer scale. Suggested novel strategy opens the door for completely new ways for enhanced extreme thrust control of the solid propulsion systems.
