In the present study,two-layered stainless steel-copper composites with a thickness of 50μm were initially subjected to annealing at 800,900 and 1000℃for 5 min,respectively,to achieve diverse microstructural feature...In the present study,two-layered stainless steel-copper composites with a thickness of 50μm were initially subjected to annealing at 800,900 and 1000℃for 5 min,respectively,to achieve diverse microstructural features.Then the influence of annealing temperature on the formability of stainless steel-copper composites and the quality of micro composite cups manufactured by micro deep drawing(MDD)were investigated,and the underlying mechanism was analyzed.Three finite element(FE)models,including basic FE model,Voronoi FE model and surface morphological FE model,were developed to analyze the forming performance of stainless steel-copper composites during MDD.The results show that the stainless steel-copper composites annealed at 900℃possess the best plasticity owing to the homogeneous and refined microstructure in both stainless steel and copper matrixes,and the micro composite cup with specimen annealed at 900℃exhibits a uniform wall thickness as well as high surface quality with the fewest wrinkles.The results obtained from the surface morphological FE model considering material inhomogeneity and surface morphology of the composites are the closest to the experimental results compared to the basic and Voronoi FE model.During MDD process,the drawing forces decrease with increasing annealing temperature as a consequence of the strength reduction.展开更多
Based on hot metal pretreatment （HMPT）-basic oxygen furnace （BOF）-Rheinstahl Heraeus （RH）-compact strip production （CSP） process, parameters controlling on cold rolling deep drawing substrate SPHE were investi...Based on hot metal pretreatment （HMPT）-basic oxygen furnace （BOF）-Rheinstahl Heraeus （RH）-compact strip production （CSP） process, parameters controlling on cold rolling deep drawing substrate SPHE were investigated during smelting and rolling process by composition design and technology control. The influence of parameters on chemical compositions, mechanical properties and microstructure was revealed by scanning electron microscope （SEM）. The results show that, 1） main chemical components in SPHE are w（C）_〈40×10^-6, w（Si）_〈 0.01%, w（S）_〈0.009%, w（N）〈20×10^-6, w（O）〈_ 25×10^-6; 2） main mechanical properties of the SPHE are Crs=274 MPa, 00=334 MPa, A=48.9%; 3） main performances of deep drawing quality （DDQ） grade steel produced by SPHE are as follows, transversely crs=167 MPa, 00=298 MPa, n=0.219, r=2.46; vertically σs=166 MPa, 00=298 MPa, n=0.226, r=2.39; in 45° direction σ=171 MPa, 00=308 MPa, n=0.214, t=2.26; 4） microstrueture of DDQ is ferrite, average grain size is Grade 7.5, and inclusion size is 3-10μm.展开更多
Commercial aluminium alloy sheets are presently sem ic ontinuously, direct chill casting billets that are hot and cold rolled to the fi nal gauge. Interest has been shown in continuous methods which eliminate the ho t...Commercial aluminium alloy sheets are presently sem ic ontinuously, direct chill casting billets that are hot and cold rolled to the fi nal gauge. Interest has been shown in continuous methods which eliminate the ho t rolling step through rapid solidification of the molten metal to the final sla b. Accordingly, sheets are produced by homogenization, cold rolling, intermedia te and final annealing of these roll-cast slabs. The problem of earing is of gr eat concern as it causes frequent interruption of production runs and leads to m aterial wastage. Therefore, it is quite desirable that earing can be predic ted and consequently necessary measures be taken to minimize or eliminate this u nwanted phenomenon. It is accepted generally that, the principal source of earing is the crystallogr aphic anisotropy arising from non-random distribution of crystal orientations i n the material. Accordingly, several attempts have been made to correlate the m echanical and crystallographic properties of the materials to the earing behavio ur for predictive purposes. Some of these are based on continuum concepts which concentrate on the macroscopic rather than the microscopic aspects of the mater ials. To accommodate the microstructural features of the material, some models have been developed. A more recent approach which provides a connection between texture and plastic anisotropy parameters of the material is the Continuum Mech anics of Textured Polycrystals (CMTP) method proposed by Lin et al. A simplifie d version of this method has been suggested by Chan with promising accuracy for aluminium and copper sheets. AA3105 and AA8011 aluminium alloy sheets were used in this investigation. The a s-cast slabs were cold rolled to the final thickness of 1.0 mm. Different anne aling temperatures in the range of 420 ℃ to 540 ℃ produced a range of R-value s. Circular blanks of 60 mm diameter were machined and deep drawn using a cylind rical flat-bottom punch of 33 mm diameter. The heights of the drawn cups were measured at 0, 45 and 90° to the rolling direction, with the aid of a microme ter accurate to 10 -2 mm. The earing percentage was then calculated usin g the following formula: % earing=h p-h v1/2(h p+h v)(1) where h p is the distance between the bottom of the cup and the peak of ear , and h v is the distance between the bottom of the cup and the valley of t he ear. For the measurement of plastic strain ratios (R-values), tensile specimens cut at 0, 45 and 90° to the rolling direction were photogridded with 1mm square s. These specimens were then stretched in the range of uniform deformation and the dimensional changes were measured with the aid of a travelling microscope. The strain ratios, whether R 0, R 45 or R 90 were determined from the following equation: R θ=dε wdε t=dε wdε l+dε w(2) where Θ refers to the specimen orientation and dε w and dεl refer to the transverse and longitudinal strains of the gauge section, respectively. The av erage strain ratio, R, and the parameter ΔR were then calculated from: R=14(R 0+2R 45+R 90)(3) ΔR=12(R 0-2R 45+R 90)(4) where R 0, R 45 and R 90 values are determined using specimen s cut at 0, 45 and 90° to the rolling direction, respectively. Finally, a continuum mechanics approach using different yield criteria is employ ed for the prediction of earing behaviour under different conditions of the mate rials. Instead of using texture data, the yield stress values are obtained by d ifferent anisotropic yield criteria such as; Hosford, Hill, and Zhou. The predicted earing profiles are compared to the experimental data and the suit ability of different yield criteria is discussed.展开更多
基金Projects(51975398,52105392)supported by the National Natural Science Foundation of ChinaProject(YDZJSX2021A006)supported by the Central Government Guided Local Science and Technology Development Fund Project,China+1 种基金Project(20210035)supported by the Scientific Activities of Selected Returned Overseas Professionals in Shanxi Province,ChinaProject(2020-037)supported by the Fund Program for the Research Project Supported by Shanxi Scholarship Council,China。
文摘In the present study,two-layered stainless steel-copper composites with a thickness of 50μm were initially subjected to annealing at 800,900 and 1000℃for 5 min,respectively,to achieve diverse microstructural features.Then the influence of annealing temperature on the formability of stainless steel-copper composites and the quality of micro composite cups manufactured by micro deep drawing(MDD)were investigated,and the underlying mechanism was analyzed.Three finite element(FE)models,including basic FE model,Voronoi FE model and surface morphological FE model,were developed to analyze the forming performance of stainless steel-copper composites during MDD.The results show that the stainless steel-copper composites annealed at 900℃possess the best plasticity owing to the homogeneous and refined microstructure in both stainless steel and copper matrixes,and the micro composite cup with specimen annealed at 900℃exhibits a uniform wall thickness as well as high surface quality with the fewest wrinkles.The results obtained from the surface morphological FE model considering material inhomogeneity and surface morphology of the composites are the closest to the experimental results compared to the basic and Voronoi FE model.During MDD process,the drawing forces decrease with increasing annealing temperature as a consequence of the strength reduction.
基金Project(50971135) supported by the National Natural Science Foundation of China
文摘Based on hot metal pretreatment （HMPT）-basic oxygen furnace （BOF）-Rheinstahl Heraeus （RH）-compact strip production （CSP） process, parameters controlling on cold rolling deep drawing substrate SPHE were investigated during smelting and rolling process by composition design and technology control. The influence of parameters on chemical compositions, mechanical properties and microstructure was revealed by scanning electron microscope （SEM）. The results show that, 1） main chemical components in SPHE are w（C）_〈40×10^-6, w（Si）_〈 0.01%, w（S）_〈0.009%, w（N）〈20×10^-6, w（O）〈_ 25×10^-6; 2） main mechanical properties of the SPHE are Crs=274 MPa, 00=334 MPa, A=48.9%; 3） main performances of deep drawing quality （DDQ） grade steel produced by SPHE are as follows, transversely crs=167 MPa, 00=298 MPa, n=0.219, r=2.46; vertically σs=166 MPa, 00=298 MPa, n=0.226, r=2.39; in 45° direction σ=171 MPa, 00=308 MPa, n=0.214, t=2.26; 4） microstrueture of DDQ is ferrite, average grain size is Grade 7.5, and inclusion size is 3-10μm.
文摘Commercial aluminium alloy sheets are presently sem ic ontinuously, direct chill casting billets that are hot and cold rolled to the fi nal gauge. Interest has been shown in continuous methods which eliminate the ho t rolling step through rapid solidification of the molten metal to the final sla b. Accordingly, sheets are produced by homogenization, cold rolling, intermedia te and final annealing of these roll-cast slabs. The problem of earing is of gr eat concern as it causes frequent interruption of production runs and leads to m aterial wastage. Therefore, it is quite desirable that earing can be predic ted and consequently necessary measures be taken to minimize or eliminate this u nwanted phenomenon. It is accepted generally that, the principal source of earing is the crystallogr aphic anisotropy arising from non-random distribution of crystal orientations i n the material. Accordingly, several attempts have been made to correlate the m echanical and crystallographic properties of the materials to the earing behavio ur for predictive purposes. Some of these are based on continuum concepts which concentrate on the macroscopic rather than the microscopic aspects of the mater ials. To accommodate the microstructural features of the material, some models have been developed. A more recent approach which provides a connection between texture and plastic anisotropy parameters of the material is the Continuum Mech anics of Textured Polycrystals (CMTP) method proposed by Lin et al. A simplifie d version of this method has been suggested by Chan with promising accuracy for aluminium and copper sheets. AA3105 and AA8011 aluminium alloy sheets were used in this investigation. The a s-cast slabs were cold rolled to the final thickness of 1.0 mm. Different anne aling temperatures in the range of 420 ℃ to 540 ℃ produced a range of R-value s. Circular blanks of 60 mm diameter were machined and deep drawn using a cylind rical flat-bottom punch of 33 mm diameter. The heights of the drawn cups were measured at 0, 45 and 90° to the rolling direction, with the aid of a microme ter accurate to 10 -2 mm. The earing percentage was then calculated usin g the following formula: % earing=h p-h v1/2(h p+h v)(1) where h p is the distance between the bottom of the cup and the peak of ear , and h v is the distance between the bottom of the cup and the valley of t he ear. For the measurement of plastic strain ratios (R-values), tensile specimens cut at 0, 45 and 90° to the rolling direction were photogridded with 1mm square s. These specimens were then stretched in the range of uniform deformation and the dimensional changes were measured with the aid of a travelling microscope. The strain ratios, whether R 0, R 45 or R 90 were determined from the following equation: R θ=dε wdε t=dε wdε l+dε w(2) where Θ refers to the specimen orientation and dε w and dεl refer to the transverse and longitudinal strains of the gauge section, respectively. The av erage strain ratio, R, and the parameter ΔR were then calculated from: R=14(R 0+2R 45+R 90)(3) ΔR=12(R 0-2R 45+R 90)(4) where R 0, R 45 and R 90 values are determined using specimen s cut at 0, 45 and 90° to the rolling direction, respectively. Finally, a continuum mechanics approach using different yield criteria is employ ed for the prediction of earing behaviour under different conditions of the mate rials. Instead of using texture data, the yield stress values are obtained by d ifferent anisotropic yield criteria such as; Hosford, Hill, and Zhou. The predicted earing profiles are compared to the experimental data and the suit ability of different yield criteria is discussed.
