Given two graphs G and H,the Ramsey number R(G,H)is the smallest positive integer N such that every 2-coloring of the edges of K_(N)contains either a red G or a blue H.Let K_(N-1)■K_(1,k)be the graph obtained from K_...Given two graphs G and H,the Ramsey number R(G,H)is the smallest positive integer N such that every 2-coloring of the edges of K_(N)contains either a red G or a blue H.Let K_(N-1)■K_(1,k)be the graph obtained from K_(N-1)by adding anew vertexνconnecting k vertices of K_(N-1).A graph G withχ(G)=k+1 is called edge-critical if G contains an edge e such thatχ(G-e)=k.A considerable amount of research has been conducted by previous scholars on Ramsey numbers ofgraphs.In this study,we show that for an edge-critical graph G with x(G)=k+1,when k≥2,1≥2,and n is sufficiently large,R(G,K_(1)+nK_(t))=knt+1 and r,(G,K_(1)+nK_(t))=(k-1)nt+1.展开更多
Additive Manufacturing(AM)can provide customized parts that conventional techniques fail to deliver.One important parameter in AM is the quality of the parts,as a result of the material extrusion 3D printing(3D-P)proc...Additive Manufacturing(AM)can provide customized parts that conventional techniques fail to deliver.One important parameter in AM is the quality of the parts,as a result of the material extrusion 3D printing(3D-P)procedure.This can be very important in defense-related applications,where optimum performance needs to be guaranteed.The quality of the Polyetherimide 3D-P specimens was examined by considering six control parameters,namely,infill percentage,layer height,deposition angle,travel speed,nozzle,and bed temperature.The quality indicators were the root mean square(Rq)and average(Ra)roughness,porosity,and the actual to nominal dimensional deviation.The examination was performed with optical profilometry,optical microscopy,and micro-computed tomography scanning.The Taguchi design of experiments was applied,with twenty-five runs,five levels for each control parameter,on five replicas.Two additional confirmation runs were conducted,to ensure reliability.Prediction equations were constructed to express the quality indicators in terms of the control parameters.Three modeling approaches were applied to the experimental data,to compare their efficiency,i.e.,Linear Regression Model(LRM),Reduced Quadratic Regression Model,and Quadratic Regression Model(QRM).QRM was the most accurate one,still the differences were not high even considering the simpler LRM model.展开更多
The overturning stability is vital for the retaining wall design of foundation pits, where the surrounding soils are usually unsaturated due to water draining. Moreover, the intermediate principal stress does affect t...The overturning stability is vital for the retaining wall design of foundation pits, where the surrounding soils are usually unsaturated due to water draining. Moreover, the intermediate principal stress does affect the unsaturated soil strength; meanwhile, the relationship between the unsaturated soil strength and matric suction is nonlinear. This work is to present closed-form equations of critical embedment depth for a rigid retaining wall against overturning by means of moment equilibrium. Matric suction is considered to be distributed uniformly and linearly with depth. The unified shear strength formulation for unsaturated soils under the plane strain condition is adopted to characterize the intermediate principal stress effect, and strength nonlinearity is described by a hyperbolic model of suction angle. The result obtained is orderly series solutions rather than one specific answer; thus, it has wide theoretical significance and good applicability. The validity of this present work is demonstrated by comparing it with a lower bound solution. The traditional overturning designs for rigid retaining walls, in which the saturated soil mechanics neglecting matric suction or the unsaturated soil mechanics based on the Mohr-Coulomb criterion are employed, are special cases of the proposed result. Parametric studies about the intermediate principal stress, matric suction and its distributions along with two strength nonlinearity methods on a new defined critical buried coefficient are discussed.展开更多
A theoretical model was suggested which describes the generation of the misfit dislocation dipole in the system of the viscoelastic matrix containing a circular stiff nanoscale inhomogeneity.The critical condition of ...A theoretical model was suggested which describes the generation of the misfit dislocation dipole in the system of the viscoelastic matrix containing a circular stiff nanoscale inhomogeneity.The critical condition of misfit dislocation dipole and the solution of equilibrium position were given.The influence of the ratio of shear modulus,the misfit strain and viscosity on the equilibrium of the dislocation and critical parameter of inhomogeneity was investigated.The result shows that the equilibrium position de increases with the increase of the ratio of original shear modulus and the effect decreases with the increase of viscosity of matrix.Along with the increase of viscosity of matrix,de first increases and then decreases and possesses maximum value when t=0.3τ and tends to a stable value when t≥1.0τ.Along with the increase of viscosity of matrix,Rc first decreases and then increases and possesses minimum value when t=0.3τ and tends to a stable value when t≥1.0τ.展开更多
Based on the framework of critical state soil mechanics,a subloading surface plastic model for sand, being applicable to cyclic loading, was proposed. The model can be used to describe strain softening behaviour of sa...Based on the framework of critical state soil mechanics,a subloading surface plastic model for sand, being applicable to cyclic loading, was proposed. The model can be used to describe strain softening behaviour of sand under monotonic loading when the similarity-ratio equals to unity. The characteristics of the model are as follows: 1) A reverse bullet-shaped yield surface is adopted to ensure accurate prediction of the behavior of sand, instead of bullet-shaped or elliptical yield surface in Cam-Clay model. 2) No unique relationship between void ratio and the mean normal stress for sand prevents the direct coupling of yield surface size to void ratio, so incremental deviatoric strain hardening rule is used. 3) The model combines the concept of state-dependent dilatancy by incorporating state parameter in Rowe's stress dilatancy equation, which accounts for the dependence of dilatancy on the stress state and the material internal state. A single set of model constants, which is calibrated, can simulate stress-strain response under different initial void ratios and different confine pressures. The model is validated true by comparing predicted results with experimental results under monotonic and cyclic loading conditions.展开更多
The contribution to the critical shear stress of nanocomposites caused by the interaction between screw dislocations and core-shell nanowires (coated nanowires) with interface stresses was derived by means of the MOTT...The contribution to the critical shear stress of nanocomposites caused by the interaction between screw dislocations and core-shell nanowires (coated nanowires) with interface stresses was derived by means of the MOTT and NABARRO's model. The influence of interface stresses on the critical shear stress was examined. The result indicates that, if the volume fraction of the core-shell nanowires keeps a constant, an optimal critical shear stress may be obtained when the radius of the nanowire with interface stresses reaches a critical value, which differs from the classical solution without considering the interface stresses under the same external conditions. In addition, the material may be strengthened by the soft nanowires when the interface stresses are considered. There also exist critical values of the elastic modulus and the thickness of surface coating to alter the strengthening effect produced by it.展开更多
Rock fracture warning is one of the significant challenges in rock mechanics.Many true triaxial and synchronous acoustic emission(AE)tests were conducted on granite samples.The investigation focused on the characteris...Rock fracture warning is one of the significant challenges in rock mechanics.Many true triaxial and synchronous acoustic emission(AE)tests were conducted on granite samples.The investigation focused on the characteristics of AE signals preceding granite fracture,based on the critical slowing down(CSD)theory.The granite undergoes a transition from the stable phase to the fracture phase and exhibits a clear CSD phenomenon,characterized by a pronounced increase in variance and autocorrelation coefficient.The variance mutation points were found to be more identifiable and suitable as the primary criterion for predicting precursor information related to granite fracture,compared to the autocorrelation coefficient.It is noteworthy to emphasize that the CSD factor holds greater potential in elucidating the underlying mechanisms responsible for the critical transition of granite fracture,in comparison to the AE timing parameters.Furthermore,a novel multi-parameter collaborative prediction method for rock fracture was developed by comprehensively analyzing predictive information,including abnormal variation modes and the CSD factor of AE characteristic parameters.This method enhances the understanding and prediction of rock fracture-related geohazards.展开更多
A simplified mechanical model of ultra-high pillar was established and its potential energy expression was derived under axial load on the basis of energy theory. Under critical conditions according to the nonlinear t...A simplified mechanical model of ultra-high pillar was established and its potential energy expression was derived under axial load on the basis of energy theory. Under critical conditions according to the nonlinear theory, the critical behaviors and the forming mechanism of pillar instability were discussed by external disturbance , such as stresses waves by blasting , axial force eccentricity ratherish and imperfections in pillar. The results show that the micro-disturbances attenuate with time and they are independence each other when pillar is in the stability state. Their effects on the stability of system are inessential. The correlation degree of disturbances increases sharply and various micro-disturbances are relative and nested reciprocally when the system is in critical state and they also cooperate with each other, which induces system to reach a new state.展开更多
It is well-known that barriers have a significant impact on the production performance of horizontal wells developed in a bottom water drive reservoir. In most cases, reservoir barriers are semi-permeable. Based on pr...It is well-known that barriers have a significant impact on the production performance of horizontal wells developed in a bottom water drive reservoir. In most cases, reservoir barriers are semi-permeable. Based on previous research on impermeable reservoir barrier, a mathematical flow model was derived for a horizontal well of a bottom water drive reservoir with a semi-permeable barrier. Besides, analytical equations were also presented to calculate critical parameters, such as production rate,pressure and potential difference. The effects of barrier, well and reservoir parameters on our model results were further investigated.The results show that the larger the barrier size is or the higher the barrier location is, the higher the critical production rate and potential difference of a horizontal well are. When the barrier permeability equals the formation permeability or the barrier width equals zero, the critical production rates converge to the values same to that of the case with no barrier. When the barrier permeability equals zero, the problem is regarded as a case of impermeable barrier. This model can be applied to predicting horizontal wells' critical production parameters in reservoirs with semi-permeable barriers.展开更多
Critical care medicine focuses on understanding the pathophysiological mechanisms and treatment approaches for life-threatening conditions,including sepsis,severe trauma/burns,hemorrhagic shock,heatstroke,and acute pa...Critical care medicine focuses on understanding the pathophysiological mechanisms and treatment approaches for life-threatening conditions,including sepsis,severe trauma/burns,hemorrhagic shock,heatstroke,and acute pancreatitis,all of which have high incidence rates.These conditions are primarily characterized by acute multi-organ dysfunction,with sudden onset,severe illness,and high mortality rates.Additionally,critical care treatment demands substantial medical resources,imposing significant economic burdens on patients’families and society.In recent years,critical care medicine has achieved notable progress,especially in multidisciplinary integration with immunology-based fields.Collaboration across disciplines has not only accelerated advancements in critical care but also propelled the rapid development of modern immunology.This paper provides an overview and assessment of the cross-disciplinary fusion between critical care medicine and immunology,exploring how these fields related extensions mutually enhance each other.It further analyzes China’s potential to become a global leader in this area within the next 5 to 10 years.展开更多
It is difficult to determine the optimal weight on bit (WOB) of the double-driven bottomhole assembly (DD-BHA, with double stabilizers and a bent housing positive displacement motor (PDM)) which is employed during ver...It is difficult to determine the optimal weight on bit (WOB) of the double-driven bottomhole assembly (DD-BHA, with double stabilizers and a bent housing positive displacement motor (PDM)) which is employed during vertical and fast drilling. High WOB leads to well deviation out of control, and low WOB leads to low rate of penetration (ROP). So considering the rock physical properties, the anisotropy index function of polycrystalline diamond compact (PDC) bit was derived with the structure and cutting performance parameters of the bit, and the effect of natural hole deviation tendencies on the performance of DD-BHA resisting deviation was represented. The concept of elliptic deformation ratio was used to characterize the performance of DD-BHA resisting deviation. Eventually, a model calculating the critical WOB was established. By comparing the model predictions with the measured hole angle changes in the field, the results show that the model predictions are accurate with error less than 5.8%, which can meet the operational requirements in the projects. Furthermore, the model was adopted to justify and guide the operating conditions and parameters during drilling, which shows that the optimum WOB predicted by the model can not only control deviation but also improve ROP effectively. The model is independent on the formation characteristics of blocks, so it can be expanded widely to other oilfields.展开更多
Using the Gleeble-1500 D simulator, the hot deformation behavior and dynamic recrystallization critical conditions of the 10%Ti C/Cu-Al2O3(volume fraction) composite were investigated by compression tests at the tempe...Using the Gleeble-1500 D simulator, the hot deformation behavior and dynamic recrystallization critical conditions of the 10%Ti C/Cu-Al2O3(volume fraction) composite were investigated by compression tests at the temperatures from 450 °C to 850 °C with the strain rates from 0.001 s-1 to 1 s-1. The results show that the softening mechanism of the dynamic recrystallization is a feature of high-temperature flow true stress-strain curves of the composite, and the peak stress increases with the decreasing deformation temperature or the increasing strain rate. The thermal deformation activation energy was calculated as 170.732 k J/mol and the constitutive equation was established. The inflection point in the lnθ-ε curve appears and the minimum value of-(lnθ)/ε-ε curve is presented when the critical state is attained for this composite. The critical strain increases with the increasing strain rate or the decreasing deformation temperature. There is linear relationship between critical strain and peak strain, i.e., εc=0.572εp. The predicting model of critical strain is described by the function of εc=1.062×10-2Z0.0826.展开更多
A new static task scheduling algorithm named edge-zeroing based on dynamic critical paths is proposed. The main ideas of the algorithm are as follows: firstly suppose that all of the tasks are in different clusters; s...A new static task scheduling algorithm named edge-zeroing based on dynamic critical paths is proposed. The main ideas of the algorithm are as follows: firstly suppose that all of the tasks are in different clusters; secondly, select one of the critical paths of the partially clustered directed acyclic graph; thirdly, try to zero one of graph communication edges; fourthly, repeat above three processes until all edges are zeroed; finally, check the generated clusters to see if some of them can be further merged without increasing the parallel time. Comparisons of the previous algorithms with edge-zeroing based on dynamic critical paths show that the new algorithm has not only a low complexity but also a desired performance comparable or even better on average to much higher complexity heuristic algorithms.展开更多
Discuss a class of real planar cubic systems with a critical point O (0,0) of nine orders and obtain the conditions for its limit cycle surrounding the origin, and prove that when small pertubations of coefficients ar...Discuss a class of real planar cubic systems with a critical point O (0,0) of nine orders and obtain the conditions for its limit cycle surrounding the origin, and prove that when small pertubations of coefficients are made, the critical point O (0,0) of nine orders is split into nine real simple critical points and the limit cycle surrounding the origin becomes the limit cycle containing nine critical points in its interior.展开更多
A three-dimensional elasto-plastic finite element analysis of pre-twist process for a torsional axis made of 45GrNiMoVA steel, was carried out using a commercial finite element analysis code, MSC MARC 2001. The result...A three-dimensional elasto-plastic finite element analysis of pre-twist process for a torsional axis made of 45GrNiMoVA steel, was carried out using a commercial finite element analysis code, MSC MARC 2001. The results show that the critical pre-twist strain angle is 0.027 rad and the maximum elastic shear stress after pre-twist is 1694MPa for the torsional axis.展开更多
In uncovering the mechanisms of teaching critical thinking in China,scholars tend to ignore the re-quirement of rational thinking in teaching. Based on the discussion of rational presuppositions of critical thinking i...In uncovering the mechanisms of teaching critical thinking in China,scholars tend to ignore the re-quirement of rational thinking in teaching. Based on the discussion of rational presuppositions of critical thinking in Western cultures, this article argues that, while Western critical thinking presets a kind of rationality which is biased to-wards descriptive logic rather than prescriptive logic, the virtue - centered traditional Chinese culture cultivates a gener-al habit of using methods of prescriptive logic. Descriptive logic accounts for “how to get” true judgments while pre- scriprive logic aims at explaining “why a true judgment is true”. Critical thinking education in China should pay more attention to the role descriptive logic plays. The fact that the new - media infomiarion disseminarion is deepening in- tercultiiral communication makes it necessary to implement critical thinking education in China,but the implementa-tion should be focused on cultivating the students* ability to organize discourse in a logical way.展开更多
Protection of urban critical infrastructures(CIs)from GPS-denied,bomb-carrying kamikaze drones(G-BKDs)is very challenging.Previous approaches based on drone jamming,spoofing,communication interruption and hijacking ca...Protection of urban critical infrastructures(CIs)from GPS-denied,bomb-carrying kamikaze drones(G-BKDs)is very challenging.Previous approaches based on drone jamming,spoofing,communication interruption and hijacking cannot be applied in the case under examination,since G-B-KDs are uncontrolled.On the other hand,drone capturing schemes and electromagnetic pulse(EMP)weapons seem to be effective.However,again,existing approaches present various limitations,while most of them do not examine the case of G-B-KDs.This paper,focuses on the aforementioned under-researched field,where the G-B-KD is confronted by two defensive drones.The first neutralizes and captures the kamikaze drone,while the second captures the bomb.Both defensive drones are equipped with a net-gun and an innovative algorithm,which,among others,estimates the locations of interception,using a real-world trajectory model.Additionally,one of the defensive drones is also equipped with an EMP weapon to damage the electronics equipment of the kamikaze drone and reduce the capturing time and the overall risk.Extensive simulated experiments and comparisons to state-of-art methods,reveal the advantages and limitations of the proposed approach.More specifically,compared to state-of-art,the proposed approach improves:(a)time to neutralize the target by at least 6.89%,(b)maximum number of missions by at least 1.27%and(c)total cost by at least 5.15%.展开更多
基金supported by the National Key Research and Development Program of China(2023YFA1010200,2020YFA0713100)the National Natural Science Foundation of China(12071453)the Innovation Program for Quantum Science and Technology(2021ZD0302902).
文摘Given two graphs G and H,the Ramsey number R(G,H)is the smallest positive integer N such that every 2-coloring of the edges of K_(N)contains either a red G or a blue H.Let K_(N-1)■K_(1,k)be the graph obtained from K_(N-1)by adding anew vertexνconnecting k vertices of K_(N-1).A graph G withχ(G)=k+1 is called edge-critical if G contains an edge e such thatχ(G-e)=k.A considerable amount of research has been conducted by previous scholars on Ramsey numbers ofgraphs.In this study,we show that for an edge-critical graph G with x(G)=k+1,when k≥2,1≥2,and n is sufficiently large,R(G,K_(1)+nK_(t))=knt+1 and r,(G,K_(1)+nK_(t))=(k-1)nt+1.
文摘Additive Manufacturing(AM)can provide customized parts that conventional techniques fail to deliver.One important parameter in AM is the quality of the parts,as a result of the material extrusion 3D printing(3D-P)procedure.This can be very important in defense-related applications,where optimum performance needs to be guaranteed.The quality of the Polyetherimide 3D-P specimens was examined by considering six control parameters,namely,infill percentage,layer height,deposition angle,travel speed,nozzle,and bed temperature.The quality indicators were the root mean square(Rq)and average(Ra)roughness,porosity,and the actual to nominal dimensional deviation.The examination was performed with optical profilometry,optical microscopy,and micro-computed tomography scanning.The Taguchi design of experiments was applied,with twenty-five runs,five levels for each control parameter,on five replicas.Two additional confirmation runs were conducted,to ensure reliability.Prediction equations were constructed to express the quality indicators in terms of the control parameters.Three modeling approaches were applied to the experimental data,to compare their efficiency,i.e.,Linear Regression Model(LRM),Reduced Quadratic Regression Model,and Quadratic Regression Model(QRM).QRM was the most accurate one,still the differences were not high even considering the simpler LRM model.
基金Project(41202191)supported by the National Natural Science Foundation of ChinaProject(2015JM4146)supported by the Natural Science Foundation of Shaanxi Province,ChinaProject(2015)supported by the Postdoctoral Research Project of Shaanxi Province,China
文摘The overturning stability is vital for the retaining wall design of foundation pits, where the surrounding soils are usually unsaturated due to water draining. Moreover, the intermediate principal stress does affect the unsaturated soil strength; meanwhile, the relationship between the unsaturated soil strength and matric suction is nonlinear. This work is to present closed-form equations of critical embedment depth for a rigid retaining wall against overturning by means of moment equilibrium. Matric suction is considered to be distributed uniformly and linearly with depth. The unified shear strength formulation for unsaturated soils under the plane strain condition is adopted to characterize the intermediate principal stress effect, and strength nonlinearity is described by a hyperbolic model of suction angle. The result obtained is orderly series solutions rather than one specific answer; thus, it has wide theoretical significance and good applicability. The validity of this present work is demonstrated by comparing it with a lower bound solution. The traditional overturning designs for rigid retaining walls, in which the saturated soil mechanics neglecting matric suction or the unsaturated soil mechanics based on the Mohr-Coulomb criterion are employed, are special cases of the proposed result. Parametric studies about the intermediate principal stress, matric suction and its distributions along with two strength nonlinearity methods on a new defined critical buried coefficient are discussed.
基金Project(10472030) supported by the National Natural Science Foundation of China
文摘A theoretical model was suggested which describes the generation of the misfit dislocation dipole in the system of the viscoelastic matrix containing a circular stiff nanoscale inhomogeneity.The critical condition of misfit dislocation dipole and the solution of equilibrium position were given.The influence of the ratio of shear modulus,the misfit strain and viscosity on the equilibrium of the dislocation and critical parameter of inhomogeneity was investigated.The result shows that the equilibrium position de increases with the increase of the ratio of original shear modulus and the effect decreases with the increase of viscosity of matrix.Along with the increase of viscosity of matrix,de first increases and then decreases and possesses maximum value when t=0.3τ and tends to a stable value when t≥1.0τ.Along with the increase of viscosity of matrix,Rc first decreases and then increases and possesses minimum value when t=0.3τ and tends to a stable value when t≥1.0τ.
基金Project(07JCZDJC09800) supported by Tianjin Natural Science FoundationProject(07FDZDSF01200) supported by Tianjin Science and Technology Innovation Special Funds
文摘Based on the framework of critical state soil mechanics,a subloading surface plastic model for sand, being applicable to cyclic loading, was proposed. The model can be used to describe strain softening behaviour of sand under monotonic loading when the similarity-ratio equals to unity. The characteristics of the model are as follows: 1) A reverse bullet-shaped yield surface is adopted to ensure accurate prediction of the behavior of sand, instead of bullet-shaped or elliptical yield surface in Cam-Clay model. 2) No unique relationship between void ratio and the mean normal stress for sand prevents the direct coupling of yield surface size to void ratio, so incremental deviatoric strain hardening rule is used. 3) The model combines the concept of state-dependent dilatancy by incorporating state parameter in Rowe's stress dilatancy equation, which accounts for the dependence of dilatancy on the stress state and the material internal state. A single set of model constants, which is calibrated, can simulate stress-strain response under different initial void ratios and different confine pressures. The model is validated true by comparing predicted results with experimental results under monotonic and cyclic loading conditions.
基金Projects(50801025, 50634060 ) supported by the National Natural Science Foundation of China
文摘The contribution to the critical shear stress of nanocomposites caused by the interaction between screw dislocations and core-shell nanowires (coated nanowires) with interface stresses was derived by means of the MOTT and NABARRO's model. The influence of interface stresses on the critical shear stress was examined. The result indicates that, if the volume fraction of the core-shell nanowires keeps a constant, an optimal critical shear stress may be obtained when the radius of the nanowire with interface stresses reaches a critical value, which differs from the classical solution without considering the interface stresses under the same external conditions. In addition, the material may be strengthened by the soft nanowires when the interface stresses are considered. There also exist critical values of the elastic modulus and the thickness of surface coating to alter the strengthening effect produced by it.
基金Project(52074294)supported by the National Natural Science Foundation of ChinaProject(2022YJSNY16)supported by the Fundamental Research Funds for the Central Universities,China。
文摘Rock fracture warning is one of the significant challenges in rock mechanics.Many true triaxial and synchronous acoustic emission(AE)tests were conducted on granite samples.The investigation focused on the characteristics of AE signals preceding granite fracture,based on the critical slowing down(CSD)theory.The granite undergoes a transition from the stable phase to the fracture phase and exhibits a clear CSD phenomenon,characterized by a pronounced increase in variance and autocorrelation coefficient.The variance mutation points were found to be more identifiable and suitable as the primary criterion for predicting precursor information related to granite fracture,compared to the autocorrelation coefficient.It is noteworthy to emphasize that the CSD factor holds greater potential in elucidating the underlying mechanisms responsible for the critical transition of granite fracture,in comparison to the AE timing parameters.Furthermore,a novel multi-parameter collaborative prediction method for rock fracture was developed by comprehensively analyzing predictive information,including abnormal variation modes and the CSD factor of AE characteristic parameters.This method enhances the understanding and prediction of rock fracture-related geohazards.
文摘A simplified mechanical model of ultra-high pillar was established and its potential energy expression was derived under axial load on the basis of energy theory. Under critical conditions according to the nonlinear theory, the critical behaviors and the forming mechanism of pillar instability were discussed by external disturbance , such as stresses waves by blasting , axial force eccentricity ratherish and imperfections in pillar. The results show that the micro-disturbances attenuate with time and they are independence each other when pillar is in the stability state. Their effects on the stability of system are inessential. The correlation degree of disturbances increases sharply and various micro-disturbances are relative and nested reciprocally when the system is in critical state and they also cooperate with each other, which induces system to reach a new state.
基金Project(51404201)supported by the National Natural Science Foundation of ChinaProject(2011ZX05024-003)supported by the National Science and Technology Major Project of China+1 种基金Project(14ZB0045)supported by the Scientific Project of Sichuan Provincial Education Department,ChinaProject(2015JY0076)supported by Basic Application Research of Science and Technology Department of Sichuan Province,China
文摘It is well-known that barriers have a significant impact on the production performance of horizontal wells developed in a bottom water drive reservoir. In most cases, reservoir barriers are semi-permeable. Based on previous research on impermeable reservoir barrier, a mathematical flow model was derived for a horizontal well of a bottom water drive reservoir with a semi-permeable barrier. Besides, analytical equations were also presented to calculate critical parameters, such as production rate,pressure and potential difference. The effects of barrier, well and reservoir parameters on our model results were further investigated.The results show that the larger the barrier size is or the higher the barrier location is, the higher the critical production rate and potential difference of a horizontal well are. When the barrier permeability equals the formation permeability or the barrier width equals zero, the critical production rates converge to the values same to that of the case with no barrier. When the barrier permeability equals zero, the problem is regarded as a case of impermeable barrier. This model can be applied to predicting horizontal wells' critical production parameters in reservoirs with semi-permeable barriers.
基金supported by the National Science Foundation for Distinguished Young Scholars,China(82025021).
文摘Critical care medicine focuses on understanding the pathophysiological mechanisms and treatment approaches for life-threatening conditions,including sepsis,severe trauma/burns,hemorrhagic shock,heatstroke,and acute pancreatitis,all of which have high incidence rates.These conditions are primarily characterized by acute multi-organ dysfunction,with sudden onset,severe illness,and high mortality rates.Additionally,critical care treatment demands substantial medical resources,imposing significant economic burdens on patients’families and society.In recent years,critical care medicine has achieved notable progress,especially in multidisciplinary integration with immunology-based fields.Collaboration across disciplines has not only accelerated advancements in critical care but also propelled the rapid development of modern immunology.This paper provides an overview and assessment of the cross-disciplinary fusion between critical care medicine and immunology,exploring how these fields related extensions mutually enhance each other.It further analyzes China’s potential to become a global leader in this area within the next 5 to 10 years.
基金Projects(50804040,51004082)supported by the National Natural Science Foundation of China
文摘It is difficult to determine the optimal weight on bit (WOB) of the double-driven bottomhole assembly (DD-BHA, with double stabilizers and a bent housing positive displacement motor (PDM)) which is employed during vertical and fast drilling. High WOB leads to well deviation out of control, and low WOB leads to low rate of penetration (ROP). So considering the rock physical properties, the anisotropy index function of polycrystalline diamond compact (PDC) bit was derived with the structure and cutting performance parameters of the bit, and the effect of natural hole deviation tendencies on the performance of DD-BHA resisting deviation was represented. The concept of elliptic deformation ratio was used to characterize the performance of DD-BHA resisting deviation. Eventually, a model calculating the critical WOB was established. By comparing the model predictions with the measured hole angle changes in the field, the results show that the model predictions are accurate with error less than 5.8%, which can meet the operational requirements in the projects. Furthermore, the model was adopted to justify and guide the operating conditions and parameters during drilling, which shows that the optimum WOB predicted by the model can not only control deviation but also improve ROP effectively. The model is independent on the formation characteristics of blocks, so it can be expanded widely to other oilfields.
基金Project(51101052) supported by the National Natural Science Foundation of China
文摘Using the Gleeble-1500 D simulator, the hot deformation behavior and dynamic recrystallization critical conditions of the 10%Ti C/Cu-Al2O3(volume fraction) composite were investigated by compression tests at the temperatures from 450 °C to 850 °C with the strain rates from 0.001 s-1 to 1 s-1. The results show that the softening mechanism of the dynamic recrystallization is a feature of high-temperature flow true stress-strain curves of the composite, and the peak stress increases with the decreasing deformation temperature or the increasing strain rate. The thermal deformation activation energy was calculated as 170.732 k J/mol and the constitutive equation was established. The inflection point in the lnθ-ε curve appears and the minimum value of-(lnθ)/ε-ε curve is presented when the critical state is attained for this composite. The critical strain increases with the increasing strain rate or the decreasing deformation temperature. There is linear relationship between critical strain and peak strain, i.e., εc=0.572εp. The predicting model of critical strain is described by the function of εc=1.062×10-2Z0.0826.
文摘A new static task scheduling algorithm named edge-zeroing based on dynamic critical paths is proposed. The main ideas of the algorithm are as follows: firstly suppose that all of the tasks are in different clusters; secondly, select one of the critical paths of the partially clustered directed acyclic graph; thirdly, try to zero one of graph communication edges; fourthly, repeat above three processes until all edges are zeroed; finally, check the generated clusters to see if some of them can be further merged without increasing the parallel time. Comparisons of the previous algorithms with edge-zeroing based on dynamic critical paths show that the new algorithm has not only a low complexity but also a desired performance comparable or even better on average to much higher complexity heuristic algorithms.
基金The Natural Science Foundation of Hunan Province !(No .97JJN 70 )
文摘Discuss a class of real planar cubic systems with a critical point O (0,0) of nine orders and obtain the conditions for its limit cycle surrounding the origin, and prove that when small pertubations of coefficients are made, the critical point O (0,0) of nine orders is split into nine real simple critical points and the limit cycle surrounding the origin becomes the limit cycle containing nine critical points in its interior.
文摘A three-dimensional elasto-plastic finite element analysis of pre-twist process for a torsional axis made of 45GrNiMoVA steel, was carried out using a commercial finite element analysis code, MSC MARC 2001. The results show that the critical pre-twist strain angle is 0.027 rad and the maximum elastic shear stress after pre-twist is 1694MPa for the torsional axis.
文摘In uncovering the mechanisms of teaching critical thinking in China,scholars tend to ignore the re-quirement of rational thinking in teaching. Based on the discussion of rational presuppositions of critical thinking in Western cultures, this article argues that, while Western critical thinking presets a kind of rationality which is biased to-wards descriptive logic rather than prescriptive logic, the virtue - centered traditional Chinese culture cultivates a gener-al habit of using methods of prescriptive logic. Descriptive logic accounts for “how to get” true judgments while pre- scriprive logic aims at explaining “why a true judgment is true”. Critical thinking education in China should pay more attention to the role descriptive logic plays. The fact that the new - media infomiarion disseminarion is deepening in- tercultiiral communication makes it necessary to implement critical thinking education in China,but the implementa-tion should be focused on cultivating the students* ability to organize discourse in a logical way.
基金supported in part by Interbit Research and in part by the European Union under(Grant No.2021-1-EL01-KA220-VET-000028082).
文摘Protection of urban critical infrastructures(CIs)from GPS-denied,bomb-carrying kamikaze drones(G-BKDs)is very challenging.Previous approaches based on drone jamming,spoofing,communication interruption and hijacking cannot be applied in the case under examination,since G-B-KDs are uncontrolled.On the other hand,drone capturing schemes and electromagnetic pulse(EMP)weapons seem to be effective.However,again,existing approaches present various limitations,while most of them do not examine the case of G-B-KDs.This paper,focuses on the aforementioned under-researched field,where the G-B-KD is confronted by two defensive drones.The first neutralizes and captures the kamikaze drone,while the second captures the bomb.Both defensive drones are equipped with a net-gun and an innovative algorithm,which,among others,estimates the locations of interception,using a real-world trajectory model.Additionally,one of the defensive drones is also equipped with an EMP weapon to damage the electronics equipment of the kamikaze drone and reduce the capturing time and the overall risk.Extensive simulated experiments and comparisons to state-of-art methods,reveal the advantages and limitations of the proposed approach.More specifically,compared to state-of-art,the proposed approach improves:(a)time to neutralize the target by at least 6.89%,(b)maximum number of missions by at least 1.27%and(c)total cost by at least 5.15%.
