3D printing technology enhances the combustion characteristics of hybrid rocket fuels by enabling complex geometries. However, improvements in regression rates and energy properties of monotonous 3D printed fuels have...3D printing technology enhances the combustion characteristics of hybrid rocket fuels by enabling complex geometries. However, improvements in regression rates and energy properties of monotonous 3D printed fuels have been limited. This study explores the impact of poly(vinylidene fluoride) and polydopamine-coated aluminum particles on the thermal and combustion properties of 3D printed hybrid rocket fuels. Physical self-assembly and anti-solvent methods were employed for constructing composite μAl particles. Characterization using SEM, XRD, XPS, FTIR, and μCT revealed a core-shell structure and homogeneous elemental distribution. Thermal analysis showed that PVDF coatings significantly increased the heat of combustion for aluminum particles, with maximum enhancement observed in μAl@PDA@PVDF(denoted as μAl@PF) at 6.20 k J/g. Subsequently, 3D printed fuels with varying pure and composite μAl particle contents were prepared using 3D printing. Combustion tests indicated higher regression rates for Al@PF/Resin composites compared to pure resin, positively correlating with particle content. The fluorocarbon-alumina reaction during the combustion stage intensified Al particle combustion, reducing residue size. A comprehensive model based on experiments provides insights into the combustion process of PDA and PVDF-coated droplets. This study advances the design of 3D-printed hybrid rocket fuels, offering strategies to improve regression rates and energy release, crucial for enhancing solid fuel performance for hybrid propulsion.展开更多
Broadband near-infrared(NIR)luminescent materials have shown great promise in applications such as optical communication,biomedicine,and optoelectronic devices.However,the current research is focused on phos⁃phors and...Broadband near-infrared(NIR)luminescent materials have shown great promise in applications such as optical communication,biomedicine,and optoelectronic devices.However,the current research is focused on phos⁃phors and glasses,and it is important to develop broadband NIR luminescent nanomaterials.Here,we report an erbi⁃um-sensitized core-shell nanocrystal design for broadband NIR emission.Based on the structural design with suitable dopings of Tm^(3+)and Ho^(3+),the broadband NIR emission covering 1.5-2.1μm region is achieved under 980 nm and 808 nm excitations.Moreover,the emission intensity is further enhanced by introducing Yb^(3+)and Nd^(3+)into the sam⁃ple,respectively,and the energy transfer processes between them are systematically discussed.Our results present a novel approach for developing broadband NIR luminescent materials and devices.展开更多
A gold catalyst of Au/pyrenyl‑graphdiyne(Pyr‑GDY)was prepared by anchoring small size of gold nanoparticles(Au NPs)on the surface of Pyr‑GDY for electrocatalytic nitrogen reduction reaction(eNRR),in which Au NPs with ...A gold catalyst of Au/pyrenyl‑graphdiyne(Pyr‑GDY)was prepared by anchoring small size of gold nanoparticles(Au NPs)on the surface of Pyr‑GDY for electrocatalytic nitrogen reduction reaction(eNRR),in which Au NPs with a size of approximately 3.69 nm was evenly distributed on spongy‑like porous Pyr‑GDY.The catalyst exhibited a good electrocatalytic activity for N_(2)reduction in a nitrogen‑saturated electrolyte,with an ammonia yield of 32.1μg·h^(-1)·mg_(cat)^(-1)at-0.3 V(vs RHE),3.5 times higher than that of Au/C(Au NPs anchored on carbon black).In addition,Au/Pyr‑GDY showed a Faraday efficiency(FE)of 26.9%for eNRR,and a good catalysis durability for over 22 h.展开更多
TiC/Ti_(2)AlC core-shell structure reinforced Ti-based composite coating was prepared by laser cladding technology.The effect of Ti_(2)AlC content on the microstructure and mechanical behavior of the coating was studi...TiC/Ti_(2)AlC core-shell structure reinforced Ti-based composite coating was prepared by laser cladding technology.The effect of Ti_(2)AlC content on the microstructure and mechanical behavior of the coating was studied.The results showed that the reinforced phase was mainly TiC/Ti_(2)AlC MAX phase core-shell structure at 20%Ti_(2)AlC content.According to the synthesis mechanism,Ti_(2)AlC nucleated on TiC through the diffusion of Al atoms to further generate the core-shell structure.The friction and wear test results showed that the wear resistance of the coating was significantly improved under the load distribution effect of the core-shell structure.The friction coefficient decreased to 0.342,and the wear rate reached 8.19×10^(−5)mm^(3)/(N·m),which was only 47.07%of TC4 substrate.展开更多
Aluminum(Al)powder is widely applied in thermobaric explosives due to its high energy density and favorable reaction kinetics.However,the inert oxide layer(Al_(2)O_(3))on Al particles limits combustion reactivity and ...Aluminum(Al)powder is widely applied in thermobaric explosives due to its high energy density and favorable reaction kinetics.However,the inert oxide layer(Al_(2)O_(3))on Al particles limits combustion reactivity and energy efficiency.Fluoride-based surface modification has been developed as an effective approach to address this issue.Here,four classical fluoropolymers(F11,F14,PVDF,PTFE)are employed as coatings to prepare core-shell Al/Fluoropolymer.The combustion experimental results demonstrate that the core-shell Al/PTFE exhibits the highest flame propagation rate(52.88 mm·ms^(-1))and pressure output(109.02 k Pa)performance.Consequently,core-shell Al/PTFE is selected as a high-energy fuel to prepare RDX/Al/PTFE microspheres via the emulsion and solvent evaporation method,which can enhance the energy performance of RDX.The effects of the core-shell Al/PTFE ratio and RDX content on the combustion heat and pressure output are systematically investigated.The peak pressure reaches a maximum of 187.8 k Pa when the mass ratio of RDX,Al,and PTFE is 60:25:10.Additionally,RDX/Al/PTFE microspheres exhibit significantly higher laser-induced air shock velocities,detonation heat,and detonation pressure than those of pure RDX and RDX/Al.The mechanism underlying the enhanced reactivity and energetic performance is attributed to the ability of PTFE to etch the inert Al_(2)O_(3)shell on the surface of Al particles,thereby improving post-combustion reactions and significantly increasing the overall energy output of RDX explosives.This work offers a novel design strategy for high-energy structural thermobaric explosives for the practical applications.展开更多
The weak interface interaction and solid-solid phase transition have long been a conundrum for 1,3,5,7-tetranitro-1,3,5,7-tetraazacyclooctane(HMX)-based polymer-bonded explosives(PBX).A two-step strategy that involves...The weak interface interaction and solid-solid phase transition have long been a conundrum for 1,3,5,7-tetranitro-1,3,5,7-tetraazacyclooctane(HMX)-based polymer-bonded explosives(PBX).A two-step strategy that involves the pretreatment of HMX to endow—OH groups on the surface via polyalcohol bonding agent modification and in situ coating with nitrate ester-containing polymer,was proposed to address the problem.Two types of energetic polyether—glycidyl azide polymer(GAP)and nitrate modified GAP(GNP)were grafted onto HMX crystal based on isocyanate addition reaction bridged through neutral polymeric bonding agent(NPBA)layer.The morphology and structure of the HMX-based composites were characterized in detail and the core-shell structure was validated.The grafted polymers obviously enhanced the adhesion force between HMX crystals and fluoropolymer(F2314)binder.Due to the interfacial reinforcement among the components,the two HMX-based composites exhibited a remarkable increment of phase transition peak temperature by 10.2°C and 19.6°C with no more than 1.5%shell content,respectively.Furthermore,the impact and friction sensitivity of the composites decreased significantly as a result of the barrier produced by the grafted polymers.These findings will enhance the future prospects for the interface design of energetic composites aiming to solve the weak interface and safety concerns.展开更多
Exploring catalysts with high catalytic activity and low cost is crucial for promoting the electrocatalytic reduction of CO_(2).In this study,Ag nanoparticle catalysts were synthesized on GS carbon and vapor grown car...Exploring catalysts with high catalytic activity and low cost is crucial for promoting the electrocatalytic reduction of CO_(2).In this study,Ag nanoparticle catalysts were synthesized on GS carbon and vapor grown carbon fiber(VGCF)carbon carriers using different silver precursors(AgAc,AgNO_(3))through the ultrafast high temperature thermal shock method.The experimental results demonstrated that the performance of Ag catalysts for the electrocatalytic reduction of CO_(2) to CO could be significantly enhanced by modulating the nanostructure,carrier,and metal loading.The VGCF-AgNO_(3)-HT nanoparticles exhibited a relatively regular spherical morphology,with smaller particle sizes and uniform distribution.Furthermore,the intricate and overlapping arrangement of VGCF carbon nanofibers contributed to increasing the active area for electrochemical reactions,making it an excellent catalyst carrier.Catalysts with varying Ag loadings were prepared using the thermal shock method,and it was observed that the nanoparticles maintained their superior nanostructures even with increased Ag loading.The Ag-HT-65 catalyst exhibited outstanding catalytic performance,achieving a CO Faradaic efficiency of 93.03% at a potential of−0.8 V(vs.RHE).After 12 h of testing,the CO Faradaic efficiency remained 90%,exhibiting an excellent stability.展开更多
The catalytic proficiency of three MONs for AP thermal decomposition was studied in this work.A chemical co-precipitation method was used for synthesis of MONs(CuZnO,CoZnO,and NiZnO)and their characterization carried ...The catalytic proficiency of three MONs for AP thermal decomposition was studied in this work.A chemical co-precipitation method was used for synthesis of MONs(CuZnO,CoZnO,and NiZnO)and their characterization carried out by utilizing XRD,FTIR,and SEM.The TGA/DSC technique was employed for the investigation of the catalytic proficiency of MONs on the AP.The DSC data were used for measuring activation energy of catalyzed AP by using Ozawa,Kissinger,and Starink method.The MONs were much sensitive for AP decomposition,and the performance of AP decomposition was further improved.Among all the MONs,the CuZnO exhibits higher catalytic action than others and decomposition temperature of AP is descending around 117℃ by CuZnO.The reduction in the activation energy was noticed after the incorporation of MONs in AP.展开更多
The core-shell 2,4,6,8,10,12-Hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane/2,4,6-Trinitrotoluene(CL-20/TNT)composite was prepared by spray-drying method in which sensitive high energy explosive(CL-20)was coated with in...The core-shell 2,4,6,8,10,12-Hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane/2,4,6-Trinitrotoluene(CL-20/TNT)composite was prepared by spray-drying method in which sensitive high energy explosive(CL-20)was coated with insensitive explosive(TNT).The structure and properties of different formulations of CL-20/TNT composite and CL-20/TNT mixture were characterized by scanning electron microscopy(SEM),Transmission electron microscopy(TEM),Laser particle size analyzer,X-ray photoelectron spectroscopy(XPS),X-ray diffraction(XRD),differential scanning calorimetry(DSC),impact sensitivity test and detonation performance.The results of SEM,TEM,XPS and XRD show that e-CL-20 particles are coated by TNT.When the ratio of CL-20/TNT is 75/25,core-shell structure is well formed,and thickness of the shell is about 20e30 nm.And the analysis of heat and impact show that with the increase of TNT content,the TNT coating on the core-shell composite material can not only catalyze the thermal decomposition of core material(CL-20),but also greatly reduce the impact sensitivity.Compared with the CL-20/TNT mixture(75/25)at the same ratio,the characteristic drop height of core-shell CL-20/TNT composite(75/25)increased by 47.6%and the TNT coating can accelerate the nuclear decomposition in the CL-20/TNT composites.Therefore,the preparation of the core-shell composites can be regarded as a unique means,by which the composites are characterized by controllable decomposition rate,high energy and excellent mechanical sensitivity and could be applied to propellants and other fields.展开更多
There is a lack of thermophysical data of heat transfer oil and nano-oil in the high temperature range of 50-300 ℃ for designing and developing heat transfer oil furnace and its heating systems. In the present study,...There is a lack of thermophysical data of heat transfer oil and nano-oil in the high temperature range of 50-300 ℃ for designing and developing heat transfer oil furnace and its heating systems. In the present study, the thermal conductivity values of heat transfer oil and TiO2 nano-oil in the above high temperature range were measured by a newly developed high-temperature thermal conductivity meter. Based on the principle of least square method, the thermal conductivity values obtained from experiments were fitted separately, and the correlation between thermal conductivity and temperature of heat transfer oil and TiO2 nano-oil was obtained. The results show that the thermal conductivity and the increased percentage of thermal conductivity of TiO2 nano-oil are proportional to the increase of particle size and mass fraction of nanoparticles, but thermal conductivity is in reverse proportion to the increase of temperature and the increased percentage of thermal conductivity is less affected by temperature.展开更多
Inspired by the phenomenon of superhydrophobic plants and animals in nature,1,3,5,7-tetranitro-1,3,5,7-tetrazocane(HMX)@copper stearate(CS)core-shell composites with similar properties was prepared.A rough shell layer...Inspired by the phenomenon of superhydrophobic plants and animals in nature,1,3,5,7-tetranitro-1,3,5,7-tetrazocane(HMX)@copper stearate(CS)core-shell composites with similar properties was prepared.A rough shell layer on the surface of the HMX was observed by scanning electron microscopy(SEM),and a series of in-depth characterization confirmed the successful generation of CS and the coreshell structure of the samples.Differential scanning calorimeter(DSC)proves that the crystal transition temperature(204℃)and high temperature decomposition exothermal temperature(284℃)of HMX@CS is almost unchanged compared with pure HMX,which means HMX and CS have good compatibility.Then,the H50 of the samples also increased continuously(16.6 cm→33.7 cm)when the CS shell content increased from 1%to 5%,indicating that the CS shell has a certain buffering performance,and CS will absorb some heat and melt under the stimulation of impact due to its low melting point,which improved impact sensitivity of HMX effectively further.Moreover,HMX@CS has excellent hydrophobic and oleophilic performance,shows excellent wettability with lipid binder,and samples with appropriate CS shell content can continue to combustion stably after covering water.This waterproof and low sensitivity coating provides a new way for the development of multifunctional energetic materials.展开更多
Mesoporous molecular sieve with Al-promoted sulfated rirconia (SZA) based strong solid acid nano-particles within its mesoporous channels was synthesized by using a one-step incipient wetness impregnation method with ...Mesoporous molecular sieve with Al-promoted sulfated rirconia (SZA) based strong solid acid nano-particles within its mesoporous channels was synthesized by using a one-step incipient wetness impregnation method with zirconium sulfate and aluminum sulfate as the precursors. The assemblies of SZA/MCM-41 were obtained by thermal decomposition of the precursors in air.The resultant composite was characterized with various techniques such as nitrogen physisorption, X-ray diffraction, SEM and TEM. It was shown that the well-ordered channels of MCM-41 arranged in hexagonal arrays as well as the hollow tubular morphology was retained. The strong solid acid nanoparticles were isolated born each other and highly, dispersed in the channels. Nitrogen sorption showed the expected decrease in pore volume. The catalytic activity of SZA/MCM-41 composite in the isomerization of n-butane was dramatically improved in comparison to bulk SZA or SZA/silica.展开更多
A facile and economical approach was developed for the large-scale production of powdered core-shell structured PTFE/Al (CS-PA) energetic materials through ultrasonic-assisted mixing. The low-cost micrometer-sized PTF...A facile and economical approach was developed for the large-scale production of powdered core-shell structured PTFE/Al (CS-PA) energetic materials through ultrasonic-assisted mixing. The low-cost micrometer-sized PTFE and Al particles were used as starting materials. Under high-power ultrasonic waves, the PTFE powder was dispersed into nano-to sub-micrometer-sized particles and then encapsulated the Al microparticles to form the core-shell structure. The heat of combustion, burning rate, and pressurization rate of the powdered CS-PA were measured. The thermal-initiated reaction behavior was further evaluated using thermogravimetry-differential scanning calorimetry. Subsequently, the bulk CS-PA with a uniform microstructure was obtained via cold isostatic pressing of the powdered CS-PA followed by vacuum sintering. For the bulk CS-PA, the quasi-static compression behavior was characterized, and the impact-initiated reaction processes were conducted using the Split Hopkinson Pressure Bar (SHPB) and evaluated by a high-speed camera. Compared to physically mixed PTFE/Al materials, the powdered and bulk CS-PA demonstrated enhanced thermal- and impact-initiated reaction characteristics respectively, proving the effectiveness of our approach for constructing core-shell structures.展开更多
A novel molecularly imprinted polymer (MIP) based on upconversion nanoparticles (UCNPs) was successfully synthesized for determination of Ochratoxin A (OTA). The MIP was developed on the silica-coated UCNPs using N-(1...A novel molecularly imprinted polymer (MIP) based on upconversion nanoparticles (UCNPs) was successfully synthesized for determination of Ochratoxin A (OTA). The MIP was developed on the silica-coated UCNPs using N-(1-hydroxy-2-naphthoyl amido)-(L)-phenylalanine (HNA-Phe) as the alternative template. The final composite combined the advantages of the high selectivity of MIP with the high fluorescence intensity of UCNPs which was selective and sensitive to OTA. Under the optimal condition, the fluorescence intensity of UCNPs@SiO2@MIP decreases linearly when the concentration of OTA increases from 0.05 to 1.0 mg/L. The detection limit of OTA with the method was 0.031 mg/L. At three spiked concentration levels (50, 100 and 200 μg/kg), the recovery ranges of OTA in corn, rice and feed are 88.0%–91.6%, 80.2%–91.6% and 89.2%–90.4%, respectively.展开更多
Copper azide(CA), as a primary explosive with high energy density, has not been practically used so far because of its high electrostatic sensitivity. The Cu2O@HKUST-1 core-shell structure hybrid material was synthesi...Copper azide(CA), as a primary explosive with high energy density, has not been practically used so far because of its high electrostatic sensitivity. The Cu2O@HKUST-1 core-shell structure hybrid material was synthesized by the “bottle around ship” methodology in this research by regulating the dissolution rate of Cu2O and the generation rate of metal-organic framework(MOF) materials. Cu2O@HKUST-1 was carbonized to form a Cu O@porous carbon(CuO@PC) composite material. CuO@PC was synthesized into a copper azide(CA) @PC composite energetic material through a gas-solid phase in-situ azidation reaction.CA is encapsulated in PC framework, which acts as a nanoscale Faraday cage, and its excellent electrical conductivity prevents electrostatic charges from accumulating on the energetic material’s surface. The CA@PC composite energetic material has a CA content of 89.6%, and its electrostatic safety is nearly 30times that of pure CA(1.47 mJ compared to 0.05 mJ). CA@PC delivers an outstanding balance of safety and energy density compared to similar materials.展开更多
Superalloys are grouped as hard-to-cut materials with relatively poor machinability.Tool wear is considered one of the main machinability attributes in machining superalloys.Although numerous works have been reported ...Superalloys are grouped as hard-to-cut materials with relatively poor machinability.Tool wear is considered one of the main machinability attributes in machining superalloys.Although numerous works have been reported on factors governing tool life in machining superalloys,no study was found on the effect of nanoparticles stability on nanofluid performance and consequently resulted tool wear morphologies.In the present work,the nanoparticles were reinforced by means of improving the stability of the base fluid.To that accomplished,the surface active agent (surfactant) was added to the base cutting fluid as a reinforcing element.The effects of new lubricant on the tool wear morphology of A286 works parts were assessed.展开更多
Folic acid conjugated chitosan was prepared by cross-linking reaction with 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride(EDC), and then used as a template to prepare folic acid-chitosan(FA-CS) conjugate...Folic acid conjugated chitosan was prepared by cross-linking reaction with 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride(EDC), and then used as a template to prepare folic acid-chitosan(FA-CS) conjugated nanoparticles and load mitoxantrone nanoparticles(FA-CSNP/MTX). Drug dissolution testing, CCK-8 method, and confocal microscopy were used to detect their controlled-release capability in different situations and the specific uptake by HONE1 cells. The experimental results show that the nanoparticles have uniform size distribution of 48-58 nm. The highest encapsulation rate of the particles on mitoxantrone hydrochloride(MTX) is(77.5±1.9)%, and the drug loading efficiency is(18.4±0.4)%. The sustained release effect, cell growth inhibition activity and targeting effect of the FA-CS/MTX nanoparticles are good in artificial gastric fluid and intestinal fluid. It is demonstrated that the FA-CSNP system is a potentially useful system for the targeted delivery of anticancer drug MTX.展开更多
Properties of hydroxyapatite （HA, Ca10（PO4）6（OH）2）, including bioactivity, biocompatibility, solubility and adsorption could be tailored over wide ranges by the control of particle composition, particle size and...Properties of hydroxyapatite （HA, Ca10（PO4）6（OH）2）, including bioactivity, biocompatibility, solubility and adsorption could be tailored over wide ranges by the control of particle composition, particle size and morphology. In order to satisfy various applications, well-crystallized pure HA nanoparticles were synthesized at moderate temperatures by hydrotherrnal synthesis, and HA nanoparticles with different lengths were obtained by adding organic additives. X-ray diffractometry （XRD） and Fourier transform infrared （FTIR） spectrometry were used to characterize these nanoparticles, and the morphologies of the HA particles were observed by transmission electron microscopy （TEM）. The results demonstrate that shorter rod-like HA particles can be prepared by adding cetyltrimethylammonium bromide （CTAB）, as the additive of CTAB can block the HA crystal growth along with c-axis. And whisker HA particles are obtained by adding ethylenediamine tetraacetic acid （EDTA）, since EDTA may have effect on the dissolution-repreeipitation process of HA.展开更多
The fluidization behavior of SiO2, ZnO and TiO2 non-magnetic nanoparticles was investigated in a magnetically fluidized bed （MFB） by adding coarse magnets. The effects of both the amount of coarse magnets and the ma...The fluidization behavior of SiO2, ZnO and TiO2 non-magnetic nanoparticles was investigated in a magnetically fluidized bed （MFB） by adding coarse magnets. The effects of both the amount of coarse magnets and the magnetic field intensity on the fluidization quality of these nanoparticles were investigated. The results show that the coarse magnets added to the bed lead to a reduction in the size of the aggregates formed naturally by the primary nanopartieles. As the macroscopic performances of improved fluidization quality, the bed expansion ratio increases whilst the minimum fluidization velocity decreases with increasing the magnetic field intensity, but for TiO2 nanoparticles there exists a suitable magnetic field intensity of 0.059 6 T. The optimal amounts of coarse magnets for SiO2, ZnO and TiO2 non-magnetic nanoparticles are 40%, 50% and 60% （mass fraction）, respectively. The bed expansion results analyzed by the Richardson-Zaki scaling law show that the exponents depend on both the amount of coarse magnets and the magnetic field intensity.展开更多
基金funded by the National Natural Science Foundation of China(Grant No.06101213)the National Natural Science Foundation of China(Grant No.22105160).
文摘3D printing technology enhances the combustion characteristics of hybrid rocket fuels by enabling complex geometries. However, improvements in regression rates and energy properties of monotonous 3D printed fuels have been limited. This study explores the impact of poly(vinylidene fluoride) and polydopamine-coated aluminum particles on the thermal and combustion properties of 3D printed hybrid rocket fuels. Physical self-assembly and anti-solvent methods were employed for constructing composite μAl particles. Characterization using SEM, XRD, XPS, FTIR, and μCT revealed a core-shell structure and homogeneous elemental distribution. Thermal analysis showed that PVDF coatings significantly increased the heat of combustion for aluminum particles, with maximum enhancement observed in μAl@PDA@PVDF(denoted as μAl@PF) at 6.20 k J/g. Subsequently, 3D printed fuels with varying pure and composite μAl particle contents were prepared using 3D printing. Combustion tests indicated higher regression rates for Al@PF/Resin composites compared to pure resin, positively correlating with particle content. The fluorocarbon-alumina reaction during the combustion stage intensified Al particle combustion, reducing residue size. A comprehensive model based on experiments provides insights into the combustion process of PDA and PVDF-coated droplets. This study advances the design of 3D-printed hybrid rocket fuels, offering strategies to improve regression rates and energy release, crucial for enhancing solid fuel performance for hybrid propulsion.
文摘Broadband near-infrared(NIR)luminescent materials have shown great promise in applications such as optical communication,biomedicine,and optoelectronic devices.However,the current research is focused on phos⁃phors and glasses,and it is important to develop broadband NIR luminescent nanomaterials.Here,we report an erbi⁃um-sensitized core-shell nanocrystal design for broadband NIR emission.Based on the structural design with suitable dopings of Tm^(3+)and Ho^(3+),the broadband NIR emission covering 1.5-2.1μm region is achieved under 980 nm and 808 nm excitations.Moreover,the emission intensity is further enhanced by introducing Yb^(3+)and Nd^(3+)into the sam⁃ple,respectively,and the energy transfer processes between them are systematically discussed.Our results present a novel approach for developing broadband NIR luminescent materials and devices.
文摘A gold catalyst of Au/pyrenyl‑graphdiyne(Pyr‑GDY)was prepared by anchoring small size of gold nanoparticles(Au NPs)on the surface of Pyr‑GDY for electrocatalytic nitrogen reduction reaction(eNRR),in which Au NPs with a size of approximately 3.69 nm was evenly distributed on spongy‑like porous Pyr‑GDY.The catalyst exhibited a good electrocatalytic activity for N_(2)reduction in a nitrogen‑saturated electrolyte,with an ammonia yield of 32.1μg·h^(-1)·mg_(cat)^(-1)at-0.3 V(vs RHE),3.5 times higher than that of Au/C(Au NPs anchored on carbon black).In addition,Au/Pyr‑GDY showed a Faraday efficiency(FE)of 26.9%for eNRR,and a good catalysis durability for over 22 h.
基金Project(52365020) supported by the National Natural Science Foundation of ChinaProject([2022]06) supported by the Special Fund for Special Posts of Guizhou University,China+2 种基金Project([2024]03) supported by the Guizhou University Fund,ChinaProject(ZK[2023]78) supported by the Guizhou Provincial Basic Research Program(Natural Science),ChinaProject(BQW[2024]011) supported by the Guizhou Province Science and Technology Foundation,China。
文摘TiC/Ti_(2)AlC core-shell structure reinforced Ti-based composite coating was prepared by laser cladding technology.The effect of Ti_(2)AlC content on the microstructure and mechanical behavior of the coating was studied.The results showed that the reinforced phase was mainly TiC/Ti_(2)AlC MAX phase core-shell structure at 20%Ti_(2)AlC content.According to the synthesis mechanism,Ti_(2)AlC nucleated on TiC through the diffusion of Al atoms to further generate the core-shell structure.The friction and wear test results showed that the wear resistance of the coating was significantly improved under the load distribution effect of the core-shell structure.The friction coefficient decreased to 0.342,and the wear rate reached 8.19×10^(−5)mm^(3)/(N·m),which was only 47.07%of TC4 substrate.
基金supported by the National Natural Science Foundation of China(Grant Nos.T2222027 and 12202416)。
文摘Aluminum(Al)powder is widely applied in thermobaric explosives due to its high energy density and favorable reaction kinetics.However,the inert oxide layer(Al_(2)O_(3))on Al particles limits combustion reactivity and energy efficiency.Fluoride-based surface modification has been developed as an effective approach to address this issue.Here,four classical fluoropolymers(F11,F14,PVDF,PTFE)are employed as coatings to prepare core-shell Al/Fluoropolymer.The combustion experimental results demonstrate that the core-shell Al/PTFE exhibits the highest flame propagation rate(52.88 mm·ms^(-1))and pressure output(109.02 k Pa)performance.Consequently,core-shell Al/PTFE is selected as a high-energy fuel to prepare RDX/Al/PTFE microspheres via the emulsion and solvent evaporation method,which can enhance the energy performance of RDX.The effects of the core-shell Al/PTFE ratio and RDX content on the combustion heat and pressure output are systematically investigated.The peak pressure reaches a maximum of 187.8 k Pa when the mass ratio of RDX,Al,and PTFE is 60:25:10.Additionally,RDX/Al/PTFE microspheres exhibit significantly higher laser-induced air shock velocities,detonation heat,and detonation pressure than those of pure RDX and RDX/Al.The mechanism underlying the enhanced reactivity and energetic performance is attributed to the ability of PTFE to etch the inert Al_(2)O_(3)shell on the surface of Al particles,thereby improving post-combustion reactions and significantly increasing the overall energy output of RDX explosives.This work offers a novel design strategy for high-energy structural thermobaric explosives for the practical applications.
基金the support for this work by National Natural Science Foundation of China(Grant Nos.22175139 and 22105156)。
文摘The weak interface interaction and solid-solid phase transition have long been a conundrum for 1,3,5,7-tetranitro-1,3,5,7-tetraazacyclooctane(HMX)-based polymer-bonded explosives(PBX).A two-step strategy that involves the pretreatment of HMX to endow—OH groups on the surface via polyalcohol bonding agent modification and in situ coating with nitrate ester-containing polymer,was proposed to address the problem.Two types of energetic polyether—glycidyl azide polymer(GAP)and nitrate modified GAP(GNP)were grafted onto HMX crystal based on isocyanate addition reaction bridged through neutral polymeric bonding agent(NPBA)layer.The morphology and structure of the HMX-based composites were characterized in detail and the core-shell structure was validated.The grafted polymers obviously enhanced the adhesion force between HMX crystals and fluoropolymer(F2314)binder.Due to the interfacial reinforcement among the components,the two HMX-based composites exhibited a remarkable increment of phase transition peak temperature by 10.2°C and 19.6°C with no more than 1.5%shell content,respectively.Furthermore,the impact and friction sensitivity of the composites decreased significantly as a result of the barrier produced by the grafted polymers.These findings will enhance the future prospects for the interface design of energetic composites aiming to solve the weak interface and safety concerns.
基金Project(52304338)supported by the National Natural Science Foundation of China。
文摘Exploring catalysts with high catalytic activity and low cost is crucial for promoting the electrocatalytic reduction of CO_(2).In this study,Ag nanoparticle catalysts were synthesized on GS carbon and vapor grown carbon fiber(VGCF)carbon carriers using different silver precursors(AgAc,AgNO_(3))through the ultrafast high temperature thermal shock method.The experimental results demonstrated that the performance of Ag catalysts for the electrocatalytic reduction of CO_(2) to CO could be significantly enhanced by modulating the nanostructure,carrier,and metal loading.The VGCF-AgNO_(3)-HT nanoparticles exhibited a relatively regular spherical morphology,with smaller particle sizes and uniform distribution.Furthermore,the intricate and overlapping arrangement of VGCF carbon nanofibers contributed to increasing the active area for electrochemical reactions,making it an excellent catalyst carrier.Catalysts with varying Ag loadings were prepared using the thermal shock method,and it was observed that the nanoparticles maintained their superior nanostructures even with increased Ag loading.The Ag-HT-65 catalyst exhibited outstanding catalytic performance,achieving a CO Faradaic efficiency of 93.03% at a potential of−0.8 V(vs.RHE).After 12 h of testing,the CO Faradaic efficiency remained 90%,exhibiting an excellent stability.
文摘The catalytic proficiency of three MONs for AP thermal decomposition was studied in this work.A chemical co-precipitation method was used for synthesis of MONs(CuZnO,CoZnO,and NiZnO)and their characterization carried out by utilizing XRD,FTIR,and SEM.The TGA/DSC technique was employed for the investigation of the catalytic proficiency of MONs on the AP.The DSC data were used for measuring activation energy of catalyzed AP by using Ozawa,Kissinger,and Starink method.The MONs were much sensitive for AP decomposition,and the performance of AP decomposition was further improved.Among all the MONs,the CuZnO exhibits higher catalytic action than others and decomposition temperature of AP is descending around 117℃ by CuZnO.The reduction in the activation energy was noticed after the incorporation of MONs in AP.
文摘The core-shell 2,4,6,8,10,12-Hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane/2,4,6-Trinitrotoluene(CL-20/TNT)composite was prepared by spray-drying method in which sensitive high energy explosive(CL-20)was coated with insensitive explosive(TNT).The structure and properties of different formulations of CL-20/TNT composite and CL-20/TNT mixture were characterized by scanning electron microscopy(SEM),Transmission electron microscopy(TEM),Laser particle size analyzer,X-ray photoelectron spectroscopy(XPS),X-ray diffraction(XRD),differential scanning calorimetry(DSC),impact sensitivity test and detonation performance.The results of SEM,TEM,XPS and XRD show that e-CL-20 particles are coated by TNT.When the ratio of CL-20/TNT is 75/25,core-shell structure is well formed,and thickness of the shell is about 20e30 nm.And the analysis of heat and impact show that with the increase of TNT content,the TNT coating on the core-shell composite material can not only catalyze the thermal decomposition of core material(CL-20),but also greatly reduce the impact sensitivity.Compared with the CL-20/TNT mixture(75/25)at the same ratio,the characteristic drop height of core-shell CL-20/TNT composite(75/25)increased by 47.6%and the TNT coating can accelerate the nuclear decomposition in the CL-20/TNT composites.Therefore,the preparation of the core-shell composites can be regarded as a unique means,by which the composites are characterized by controllable decomposition rate,high energy and excellent mechanical sensitivity and could be applied to propellants and other fields.
基金Project(51346007) supported by the National Natural Science Foundation of China
文摘There is a lack of thermophysical data of heat transfer oil and nano-oil in the high temperature range of 50-300 ℃ for designing and developing heat transfer oil furnace and its heating systems. In the present study, the thermal conductivity values of heat transfer oil and TiO2 nano-oil in the above high temperature range were measured by a newly developed high-temperature thermal conductivity meter. Based on the principle of least square method, the thermal conductivity values obtained from experiments were fitted separately, and the correlation between thermal conductivity and temperature of heat transfer oil and TiO2 nano-oil was obtained. The results show that the thermal conductivity and the increased percentage of thermal conductivity of TiO2 nano-oil are proportional to the increase of particle size and mass fraction of nanoparticles, but thermal conductivity is in reverse proportion to the increase of temperature and the increased percentage of thermal conductivity is less affected by temperature.
基金financially supported by the National Natural Science Foundation of China (Grant NO.11702268)Sichuan provincial key S&T Special Projects (Grant NO.19DZX0106)
文摘Inspired by the phenomenon of superhydrophobic plants and animals in nature,1,3,5,7-tetranitro-1,3,5,7-tetrazocane(HMX)@copper stearate(CS)core-shell composites with similar properties was prepared.A rough shell layer on the surface of the HMX was observed by scanning electron microscopy(SEM),and a series of in-depth characterization confirmed the successful generation of CS and the coreshell structure of the samples.Differential scanning calorimeter(DSC)proves that the crystal transition temperature(204℃)and high temperature decomposition exothermal temperature(284℃)of HMX@CS is almost unchanged compared with pure HMX,which means HMX and CS have good compatibility.Then,the H50 of the samples also increased continuously(16.6 cm→33.7 cm)when the CS shell content increased from 1%to 5%,indicating that the CS shell has a certain buffering performance,and CS will absorb some heat and melt under the stimulation of impact due to its low melting point,which improved impact sensitivity of HMX effectively further.Moreover,HMX@CS has excellent hydrophobic and oleophilic performance,shows excellent wettability with lipid binder,and samples with appropriate CS shell content can continue to combustion stably after covering water.This waterproof and low sensitivity coating provides a new way for the development of multifunctional energetic materials.
文摘Mesoporous molecular sieve with Al-promoted sulfated rirconia (SZA) based strong solid acid nano-particles within its mesoporous channels was synthesized by using a one-step incipient wetness impregnation method with zirconium sulfate and aluminum sulfate as the precursors. The assemblies of SZA/MCM-41 were obtained by thermal decomposition of the precursors in air.The resultant composite was characterized with various techniques such as nitrogen physisorption, X-ray diffraction, SEM and TEM. It was shown that the well-ordered channels of MCM-41 arranged in hexagonal arrays as well as the hollow tubular morphology was retained. The strong solid acid nanoparticles were isolated born each other and highly, dispersed in the channels. Nitrogen sorption showed the expected decrease in pore volume. The catalytic activity of SZA/MCM-41 composite in the isomerization of n-butane was dramatically improved in comparison to bulk SZA or SZA/silica.
基金This work was supported by the National Natural Science Foundation of China(No.51571033,11804022)the Science and Technology on Transient Impact Laboratory Foundation(No.6142606183208).
文摘A facile and economical approach was developed for the large-scale production of powdered core-shell structured PTFE/Al (CS-PA) energetic materials through ultrasonic-assisted mixing. The low-cost micrometer-sized PTFE and Al particles were used as starting materials. Under high-power ultrasonic waves, the PTFE powder was dispersed into nano-to sub-micrometer-sized particles and then encapsulated the Al microparticles to form the core-shell structure. The heat of combustion, burning rate, and pressurization rate of the powdered CS-PA were measured. The thermal-initiated reaction behavior was further evaluated using thermogravimetry-differential scanning calorimetry. Subsequently, the bulk CS-PA with a uniform microstructure was obtained via cold isostatic pressing of the powdered CS-PA followed by vacuum sintering. For the bulk CS-PA, the quasi-static compression behavior was characterized, and the impact-initiated reaction processes were conducted using the Split Hopkinson Pressure Bar (SHPB) and evaluated by a high-speed camera. Compared to physically mixed PTFE/Al materials, the powdered and bulk CS-PA demonstrated enhanced thermal- and impact-initiated reaction characteristics respectively, proving the effectiveness of our approach for constructing core-shell structures.
基金Project(17ZYPTJC00050)supported by Science and Technology Committee of Tianjin,ChinaProject(2017YFC1600803)supported by the Ministry of Science and Technology of China
文摘A novel molecularly imprinted polymer (MIP) based on upconversion nanoparticles (UCNPs) was successfully synthesized for determination of Ochratoxin A (OTA). The MIP was developed on the silica-coated UCNPs using N-(1-hydroxy-2-naphthoyl amido)-(L)-phenylalanine (HNA-Phe) as the alternative template. The final composite combined the advantages of the high selectivity of MIP with the high fluorescence intensity of UCNPs which was selective and sensitive to OTA. Under the optimal condition, the fluorescence intensity of UCNPs@SiO2@MIP decreases linearly when the concentration of OTA increases from 0.05 to 1.0 mg/L. The detection limit of OTA with the method was 0.031 mg/L. At three spiked concentration levels (50, 100 and 200 μg/kg), the recovery ranges of OTA in corn, rice and feed are 88.0%–91.6%, 80.2%–91.6% and 89.2%–90.4%, respectively.
基金the financial support by Postgraduate Research & Practice Innovation Program from Jiangsu Science and Technology Department under Grant number KYCX19_0320。
文摘Copper azide(CA), as a primary explosive with high energy density, has not been practically used so far because of its high electrostatic sensitivity. The Cu2O@HKUST-1 core-shell structure hybrid material was synthesized by the “bottle around ship” methodology in this research by regulating the dissolution rate of Cu2O and the generation rate of metal-organic framework(MOF) materials. Cu2O@HKUST-1 was carbonized to form a Cu O@porous carbon(CuO@PC) composite material. CuO@PC was synthesized into a copper azide(CA) @PC composite energetic material through a gas-solid phase in-situ azidation reaction.CA is encapsulated in PC framework, which acts as a nanoscale Faraday cage, and its excellent electrical conductivity prevents electrostatic charges from accumulating on the energetic material’s surface. The CA@PC composite energetic material has a CA content of 89.6%, and its electrostatic safety is nearly 30times that of pure CA(1.47 mJ compared to 0.05 mJ). CA@PC delivers an outstanding balance of safety and energy density compared to similar materials.
文摘Superalloys are grouped as hard-to-cut materials with relatively poor machinability.Tool wear is considered one of the main machinability attributes in machining superalloys.Although numerous works have been reported on factors governing tool life in machining superalloys,no study was found on the effect of nanoparticles stability on nanofluid performance and consequently resulted tool wear morphologies.In the present work,the nanoparticles were reinforced by means of improving the stability of the base fluid.To that accomplished,the surface active agent (surfactant) was added to the base cutting fluid as a reinforcing element.The effects of new lubricant on the tool wear morphology of A286 works parts were assessed.
基金Projects(31201074,81371013) supported by the National Natural Science Foundation of ChinaProject(2011105102016) supported by the Key Program of Medical Health of Dongguan City,Guangdong Province,ChinaProject(2011108102026) supported by Dongguan Universities Program,China
文摘Folic acid conjugated chitosan was prepared by cross-linking reaction with 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride(EDC), and then used as a template to prepare folic acid-chitosan(FA-CS) conjugated nanoparticles and load mitoxantrone nanoparticles(FA-CSNP/MTX). Drug dissolution testing, CCK-8 method, and confocal microscopy were used to detect their controlled-release capability in different situations and the specific uptake by HONE1 cells. The experimental results show that the nanoparticles have uniform size distribution of 48-58 nm. The highest encapsulation rate of the particles on mitoxantrone hydrochloride(MTX) is(77.5±1.9)%, and the drug loading efficiency is(18.4±0.4)%. The sustained release effect, cell growth inhibition activity and targeting effect of the FA-CS/MTX nanoparticles are good in artificial gastric fluid and intestinal fluid. It is demonstrated that the FA-CSNP system is a potentially useful system for the targeted delivery of anticancer drug MTX.
基金Project(20070410304) supported by Postdoctoral Foundation of ChinaProject(07JJ3105) supported by Hunan Provincial Natural Science Foundation of China
文摘Properties of hydroxyapatite （HA, Ca10（PO4）6（OH）2）, including bioactivity, biocompatibility, solubility and adsorption could be tailored over wide ranges by the control of particle composition, particle size and morphology. In order to satisfy various applications, well-crystallized pure HA nanoparticles were synthesized at moderate temperatures by hydrotherrnal synthesis, and HA nanoparticles with different lengths were obtained by adding organic additives. X-ray diffractometry （XRD） and Fourier transform infrared （FTIR） spectrometry were used to characterize these nanoparticles, and the morphologies of the HA particles were observed by transmission electron microscopy （TEM）. The results demonstrate that shorter rod-like HA particles can be prepared by adding cetyltrimethylammonium bromide （CTAB）, as the additive of CTAB can block the HA crystal growth along with c-axis. And whisker HA particles are obtained by adding ethylenediamine tetraacetic acid （EDTA）, since EDTA may have effect on the dissolution-repreeipitation process of HA.
基金Project(20776163) supported by the National Natural Science Foundation of ChinaProject(20070533121) supported by the PhD Programs Foundation of Ministry of Education of ChinaProject supported by the NSFC-JSPS Cooperation Program
文摘The fluidization behavior of SiO2, ZnO and TiO2 non-magnetic nanoparticles was investigated in a magnetically fluidized bed （MFB） by adding coarse magnets. The effects of both the amount of coarse magnets and the magnetic field intensity on the fluidization quality of these nanoparticles were investigated. The results show that the coarse magnets added to the bed lead to a reduction in the size of the aggregates formed naturally by the primary nanopartieles. As the macroscopic performances of improved fluidization quality, the bed expansion ratio increases whilst the minimum fluidization velocity decreases with increasing the magnetic field intensity, but for TiO2 nanoparticles there exists a suitable magnetic field intensity of 0.059 6 T. The optimal amounts of coarse magnets for SiO2, ZnO and TiO2 non-magnetic nanoparticles are 40%, 50% and 60% （mass fraction）, respectively. The bed expansion results analyzed by the Richardson-Zaki scaling law show that the exponents depend on both the amount of coarse magnets and the magnetic field intensity.
