Increasing environmental concerns about limiting harmful emissions has necessitated sulfur-and phosphorus-free green lubricant additives.Although boron-containing compounds have been widely investigated as green lubri...Increasing environmental concerns about limiting harmful emissions has necessitated sulfur-and phosphorus-free green lubricant additives.Although boron-containing compounds have been widely investigated as green lubricant additives,their macromolecular analogs have been rarely considered yet to develop environmentally friendly lubricant additives.In this work,a series of boron-containing copolymers have been synthesized by free-radical copolymerization of stearyl methacrylate and isopropenyl boronic acid pinacol ester with different feeding ratios(S_(n)-r-B_(m),n=1,m=1/3,1,2,3,5,9).The resulting copolymers of S_(n)-r-B_(m)(n=1,m=1/3,1,2,3,5)are readily dispersed in the PAO-10 base oil and form micelle-like aggregates with hydrodynamic diameters ranging from 9.7 to 52 nm.SRV-IV oscillating reciprocating tribological tests on ball-on-flat steel pairs show that compared with the base oil of PAO-10,the friction coefficients and wear volumes of the base oil solutions of S_(n)-r-B_(m)decrease considerably up to 62%and 97%,respectively.Moreover,the base oil solution of S_(1)-r-B_(1)exhibits an excellent load-bearing capacity of(850±100)N.These superior lubricating properties are due to the formation of protective tribofilms comprising S_(n)-r-B_(m),boron oxide,and iron oxide compounds on the lubricated steel surface.Therefore,the boron-containing copolymers can be regarded as a novel class of environmentally friendly lubricating oil macroadditives for efficient friction and wear reduction without sulfur and phosphorus elements.展开更多
In this report,zinc acrylate copolymers were synthesized by used different organic acid as the side chain structure.These copolymers were further characterized by GPC,DSC and Water absorption analysis respectively,and...In this report,zinc acrylate copolymers were synthesized by used different organic acid as the side chain structure.These copolymers were further characterized by GPC,DSC and Water absorption analysis respectively,and then the effects of the chain structure of organic acid on hydrolysis degradation and copper release rate were also discussed.In the meantime,the result shows that the biocide release rate could be controlled by used different chain structure of organic acid.展开更多
Using novolac phenolic resin, aniline and formaldehyde as raw materials, benzoxazine-phenolic copolymers with different percentages of benzoxazine rings were prepared. FT-IR was adopted to characterize the molecular s...Using novolac phenolic resin, aniline and formaldehyde as raw materials, benzoxazine-phenolic copolymers with different percentages of benzoxazine rings were prepared. FT-IR was adopted to characterize the molecular structure of the novolac-type phenolic resin and the benzoxazine-phenolic copolymer BP31. In order to understand the curing process of the copolymers, the curing behavior and curing kinetic characteristics were studied by differential scanning calorimetry （DSC）, and the catalytical effect of phenolic hydroxyl on the curing behavior of copolymers was investigated. To investigate the thermal properties of this resin, the thermal degradation behaviors of the cured samples were studied by thermal gravimetric （TG） method, and glass-transition temperatures （Tg） of the cured copolymers were also evaluated by DSC. The dynamic Ozawa method was adopted to determine the kinetic parameters of the curing process as well. The activation energy is 78.8 kJ/mol and the reaction rate constant is in the range from 40.0 to 5.2 （K/min）＂ according to reaction temperatures. The Ozawa exponent decreases from 2.4 to 0.7 with the increase of reaction temperature, and curing mechanism is expounded briefly according to the results. TG result shows that the highest char yield of copolymers is 50.3%. The highest Tg of copolymers is 489 K, which is much higher than that of pure benzoxazine resin.展开更多
The products of thermal desorption were generated under the temperature of 280 ℃ and were analyzed by gas chromatography-mass spectrometry with capillary column,the residual monomer styrene was no detected.The produc...The products of thermal desorption were generated under the temperature of 280 ℃ and were analyzed by gas chromatography-mass spectrometry with capillary column,the residual monomer styrene was no detected.The products of pyrolysis were generated under the temperature of 550 ℃ and were analyzed by chromatography-mass spectrometry,14 compounds were detected.展开更多
2004年Abdel-Rehim首次提出了注射器微萃取（microextraction by packed sorbent,MEPS）技术,即用最小量的溶剂反复多次萃取药物使其达到最大回收率。MEPS就是将1 mg左右的固相吸附剂材料填充到100-250μL密闭的注射器里,或者是填充到...2004年Abdel-Rehim首次提出了注射器微萃取（microextraction by packed sorbent,MEPS）技术,即用最小量的溶剂反复多次萃取药物使其达到最大回收率。MEPS就是将1 mg左右的固相吸附剂材料填充到100-250μL密闭的注射器里,或者是填充到针管与针头之间的暗盒内。使用自动进样器将样品通过注射器,展开更多
Using the orthogonal experimental design method involving three factors and three levels, the flexural strength and the compressive strength of copolymer grouting material were studied with different compositions of w...Using the orthogonal experimental design method involving three factors and three levels, the flexural strength and the compressive strength of copolymer grouting material were studied with different compositions of water-cement ratio （mass fraction of water to cement）, epoxy resin content, and waterborne epoxy curing agent content. By orthogonal range and variance analysis, the orders of three factors to influence the strength, the significance levels of different factors, and the optimized compound ratio scheme of copolymer grouting material mixture at different curing ages were determined. An empirical relationship among the strength of copolymer grouting material, the water-cement ratio, the epoxy resin content, and the waterborne epoxy curing agent content was established by multivariate regression analysis. The results indicate that water-cement ratio is the most principal and significant influencing factor on the strength. Epoxy resin content and waterbome epoxy curing agent content also have a significant influence on the strength. But epoxy resin content has a greater influence on the 7-day and 28-day flexural strength, and waterborne epoxy curing agent content has a greater influence on the 3-day flexural strength and the compressive strength. The copolymer grouting material with water-cement ratio of 0.4, epoxy resin content of 8% （mass fraction） and waterbome epoxy curing agent content of 2% （mass fraction） is the best one for repairing of cement concrete pavement. The flexural strength and the compressive strength have good correlation, and the ratio of compressive strength to flexural strength is between 1.0 and 3.3.展开更多
EVA was widely used as the pour point depressant for waxy oil.In order to improve its effect,some graft copolymerization methods should be used to modify EVA's property.EVA has long side chains and nitrogen polar ...EVA was widely used as the pour point depressant for waxy oil.In order to improve its effect,some graft copolymerization methods should be used to modify EVA's property.EVA has long side chains and nitrogen polar groups to enforce its adaptability and effect of waxy oil.The pure amine,maleicanhydride and their reaction product were tested using infrared spectra and the NMR spectral.The results show that when the modified EVA is added into oil,the wax deposits not only on the main chain but also on the side chains.And the polar groups have the function to avoid and resist the wax crystals connection each other to form the net.Using the reaction product of maleicanhydride and high carbonic amine(C12,C16,C18 amine) as the graft component,the toluene as the solvent and BPO as the initiator,the series of new EVA graft copolymer with special side chains are prepared under controlled condition.A series of cylmaleimide exist indeed in modified EVA and the highest grafted percentage is 18.8%.EVA-16,the new graft copolymer,is better than EVA about 3 ℃ more in depressant the pour-point of Daqing waxy crude oil.展开更多
The influence of temperature and mass fraction of Pluonic F127 on the rheological properties of polyvinyl butyric （PVB）/Pluronic F127/polyethylene glycol （PEG） 200 blend systems was investigated by a rotational rh...The influence of temperature and mass fraction of Pluonic F127 on the rheological properties of polyvinyl butyric （PVB）/Pluronic F127/polyethylene glycol （PEG） 200 blend systems was investigated by a rotational rheometer with parallel plates. The results show that the blend systems approach homogeneous state at 140, 150 and 160℃while the rheological properties of the blend systems significantly deviate from the homogeneous systems at 120℃. Shear thinning behavior is observed for all the blend systems at different temperatures and is enhanced by increasing Pluronic F127 content. The complex viscosity, storage modulus, loss modulus, zero-shear activation energy and flow recovery of the blend systems increase with the increase of Pluronic F127 content. There is a crossing point for the loss modulus and the storage modulus of each sample at high frequency, which is called specified frequency （SF）. The loss modulus is larger than the storage modulus when the frequency is less than the SF, and when frequency is more than SF, the loss modulus is smaller than the storage modulus.展开更多
A series of rhodium complexes coordinated on the hybrid ligand. 2-vinylpyridine-methyl acrylate copolymers, as catalyst for the carbonylation of methanol were synthesized by the reaction of the copolymers with tetraca...A series of rhodium complexes coordinated on the hybrid ligand. 2-vinylpyridine-methyl acrylate copolymers, as catalyst for the carbonylation of methanol were synthesized by the reaction of the copolymers with tetracarbonyldichlorodirhodium. These complexes were in general very reactive in carbonylation of methanol to form acetic acid and methyl acetate without other by-product. The XPS studies of the complexes showed that the binding energies of Nls（399.1-399.4 eV） and that of Ols（532.5-532.9 eV） were higher than that of the copolymer ligand （Nls 398.1-398.3 eV and Ols 532.2-532.3 eV）, indicating the fromation of N→Rh and O→Rh coordination bonds. The IR spectra of complexes showed that the appearance of two absorption peaks of terminal carbonyl at 1990-2100 cm<sup>-1</sup>, characteristic of the cis-dicarbonyl rhodium moiety. These XPS and IR studies confirm the formation of cis-dicarbonylrhodium complex with the active centers（A） and （B） as shown in the text. The increase of activity of the complex in the展开更多
文摘Increasing environmental concerns about limiting harmful emissions has necessitated sulfur-and phosphorus-free green lubricant additives.Although boron-containing compounds have been widely investigated as green lubricant additives,their macromolecular analogs have been rarely considered yet to develop environmentally friendly lubricant additives.In this work,a series of boron-containing copolymers have been synthesized by free-radical copolymerization of stearyl methacrylate and isopropenyl boronic acid pinacol ester with different feeding ratios(S_(n)-r-B_(m),n=1,m=1/3,1,2,3,5,9).The resulting copolymers of S_(n)-r-B_(m)(n=1,m=1/3,1,2,3,5)are readily dispersed in the PAO-10 base oil and form micelle-like aggregates with hydrodynamic diameters ranging from 9.7 to 52 nm.SRV-IV oscillating reciprocating tribological tests on ball-on-flat steel pairs show that compared with the base oil of PAO-10,the friction coefficients and wear volumes of the base oil solutions of S_(n)-r-B_(m)decrease considerably up to 62%and 97%,respectively.Moreover,the base oil solution of S_(1)-r-B_(1)exhibits an excellent load-bearing capacity of(850±100)N.These superior lubricating properties are due to the formation of protective tribofilms comprising S_(n)-r-B_(m),boron oxide,and iron oxide compounds on the lubricated steel surface.Therefore,the boron-containing copolymers can be regarded as a novel class of environmentally friendly lubricating oil macroadditives for efficient friction and wear reduction without sulfur and phosphorus elements.
文摘In this report,zinc acrylate copolymers were synthesized by used different organic acid as the side chain structure.These copolymers were further characterized by GPC,DSC and Water absorption analysis respectively,and then the effects of the chain structure of organic acid on hydrolysis degradation and copper release rate were also discussed.In the meantime,the result shows that the biocide release rate could be controlled by used different chain structure of organic acid.
基金Project (20050106) supported by the Key Science and Technology Item of Guangdong Province,China
文摘Using novolac phenolic resin, aniline and formaldehyde as raw materials, benzoxazine-phenolic copolymers with different percentages of benzoxazine rings were prepared. FT-IR was adopted to characterize the molecular structure of the novolac-type phenolic resin and the benzoxazine-phenolic copolymer BP31. In order to understand the curing process of the copolymers, the curing behavior and curing kinetic characteristics were studied by differential scanning calorimetry （DSC）, and the catalytical effect of phenolic hydroxyl on the curing behavior of copolymers was investigated. To investigate the thermal properties of this resin, the thermal degradation behaviors of the cured samples were studied by thermal gravimetric （TG） method, and glass-transition temperatures （Tg） of the cured copolymers were also evaluated by DSC. The dynamic Ozawa method was adopted to determine the kinetic parameters of the curing process as well. The activation energy is 78.8 kJ/mol and the reaction rate constant is in the range from 40.0 to 5.2 （K/min）＂ according to reaction temperatures. The Ozawa exponent decreases from 2.4 to 0.7 with the increase of reaction temperature, and curing mechanism is expounded briefly according to the results. TG result shows that the highest char yield of copolymers is 50.3%. The highest Tg of copolymers is 489 K, which is much higher than that of pure benzoxazine resin.
文摘The products of thermal desorption were generated under the temperature of 280 ℃ and were analyzed by gas chromatography-mass spectrometry with capillary column,the residual monomer styrene was no detected.The products of pyrolysis were generated under the temperature of 550 ℃ and were analyzed by chromatography-mass spectrometry,14 compounds were detected.
文摘2004年Abdel-Rehim首次提出了注射器微萃取（microextraction by packed sorbent,MEPS）技术,即用最小量的溶剂反复多次萃取药物使其达到最大回收率。MEPS就是将1 mg左右的固相吸附剂材料填充到100-250μL密闭的注射器里,或者是填充到针管与针头之间的暗盒内。使用自动进样器将样品通过注射器,
基金Projects(40728003, 40772180, 40802064) supported by the National Natural Science Foundation of ChinaProject (07JJ4012) supported by the Hunan Provincial Natural Science Foundation of China+1 种基金project (20080430680) supported by China Postdoctoral Science FoundationProject(B308) supported by Shanghai Leading Academic Discipline Project
文摘Using the orthogonal experimental design method involving three factors and three levels, the flexural strength and the compressive strength of copolymer grouting material were studied with different compositions of water-cement ratio （mass fraction of water to cement）, epoxy resin content, and waterborne epoxy curing agent content. By orthogonal range and variance analysis, the orders of three factors to influence the strength, the significance levels of different factors, and the optimized compound ratio scheme of copolymer grouting material mixture at different curing ages were determined. An empirical relationship among the strength of copolymer grouting material, the water-cement ratio, the epoxy resin content, and the waterborne epoxy curing agent content was established by multivariate regression analysis. The results indicate that water-cement ratio is the most principal and significant influencing factor on the strength. Epoxy resin content and waterbome epoxy curing agent content also have a significant influence on the strength. But epoxy resin content has a greater influence on the 7-day and 28-day flexural strength, and waterborne epoxy curing agent content has a greater influence on the 3-day flexural strength and the compressive strength. The copolymer grouting material with water-cement ratio of 0.4, epoxy resin content of 8% （mass fraction） and waterbome epoxy curing agent content of 2% （mass fraction） is the best one for repairing of cement concrete pavement. The flexural strength and the compressive strength have good correlation, and the ratio of compressive strength to flexural strength is between 1.0 and 3.3.
文摘EVA was widely used as the pour point depressant for waxy oil.In order to improve its effect,some graft copolymerization methods should be used to modify EVA's property.EVA has long side chains and nitrogen polar groups to enforce its adaptability and effect of waxy oil.The pure amine,maleicanhydride and their reaction product were tested using infrared spectra and the NMR spectral.The results show that when the modified EVA is added into oil,the wax deposits not only on the main chain but also on the side chains.And the polar groups have the function to avoid and resist the wax crystals connection each other to form the net.Using the reaction product of maleicanhydride and high carbonic amine(C12,C16,C18 amine) as the graft component,the toluene as the solvent and BPO as the initiator,the series of new EVA graft copolymer with special side chains are prepared under controlled condition.A series of cylmaleimide exist indeed in modified EVA and the highest grafted percentage is 18.8%.EVA-16,the new graft copolymer,is better than EVA about 3 ℃ more in depressant the pour-point of Daqing waxy crude oil.
基金Project(20776161) supported by the National Natural Science Foundation of China
文摘The influence of temperature and mass fraction of Pluonic F127 on the rheological properties of polyvinyl butyric （PVB）/Pluronic F127/polyethylene glycol （PEG） 200 blend systems was investigated by a rotational rheometer with parallel plates. The results show that the blend systems approach homogeneous state at 140, 150 and 160℃while the rheological properties of the blend systems significantly deviate from the homogeneous systems at 120℃. Shear thinning behavior is observed for all the blend systems at different temperatures and is enhanced by increasing Pluronic F127 content. The complex viscosity, storage modulus, loss modulus, zero-shear activation energy and flow recovery of the blend systems increase with the increase of Pluronic F127 content. There is a crossing point for the loss modulus and the storage modulus of each sample at high frequency, which is called specified frequency （SF）. The loss modulus is larger than the storage modulus when the frequency is less than the SF, and when frequency is more than SF, the loss modulus is smaller than the storage modulus.
基金This word was supported by the Science Foundation and Yojng Scientists Research Award of Chinese Academy of Seiences
文摘A series of rhodium complexes coordinated on the hybrid ligand. 2-vinylpyridine-methyl acrylate copolymers, as catalyst for the carbonylation of methanol were synthesized by the reaction of the copolymers with tetracarbonyldichlorodirhodium. These complexes were in general very reactive in carbonylation of methanol to form acetic acid and methyl acetate without other by-product. The XPS studies of the complexes showed that the binding energies of Nls（399.1-399.4 eV） and that of Ols（532.5-532.9 eV） were higher than that of the copolymer ligand （Nls 398.1-398.3 eV and Ols 532.2-532.3 eV）, indicating the fromation of N→Rh and O→Rh coordination bonds. The IR spectra of complexes showed that the appearance of two absorption peaks of terminal carbonyl at 1990-2100 cm<sup>-1</sup>, characteristic of the cis-dicarbonyl rhodium moiety. These XPS and IR studies confirm the formation of cis-dicarbonylrhodium complex with the active centers（A） and （B） as shown in the text. The increase of activity of the complex in the
