A CMOS active mixer based on voltage control load technique which can operate at 1.0 V supply voltage was proposed, and its operation principle, noise and linearity analysis were also presented. Contrary to the conven...A CMOS active mixer based on voltage control load technique which can operate at 1.0 V supply voltage was proposed, and its operation principle, noise and linearity analysis were also presented. Contrary to the conventional Gilbert-type mixer which is based on RF current-commutating, the load impedance in this proposed mixer is controlled by the LO signal, and it has only two stacked transistors at each branch which is suitable for low voltage applications. The mixer was designed and fabricated in 0.18 tam CMOS process for 2.4 GHz ISM band applications. With an input of 2.44 GHz RF signal and 2.442 GHz LO signal, the measurement specifications of the proposed mixer are： the conversion gain （Gc） is 5.3 dB, the input-referred third-order intercept point （PIIP3） is 4.6 dBm, the input-referred 1 dB compression point （P1dB） is --7.4 dBm, and the single-sideband noise figure （NFSSB） is 21.7 dB.展开更多
The design and the realization of missile wings and rudders loading simulation system based on digital signal processor (DSP) TMS320LF2407 and direct torque control (DTC) servo driver ACS600 are discussed. The structu...The design and the realization of missile wings and rudders loading simulation system based on digital signal processor (DSP) TMS320LF2407 and direct torque control (DTC) servo driver ACS600 are discussed. The structure and opration principle for the system are presented. Speediness and elimination of superabundant torque are two key difficulties for electric loading simulation system. The method which can eliminate the superabundant torque is researched. Test results show the airflow resistance when missile wings and rudders are spreading can be rapidly simulated with high accuracy.展开更多
为解决互联水电系统负荷频率控制（load frequencycontrol,LFC）问题,及保持互联电网系统频率、联络线功率及区域控制误差（area control error,ACE）的稳定,根据闭环系统谐振峰值与系统响应最大峰值之间的关系,构建一个与系统参数及控...为解决互联水电系统负荷频率控制（load frequencycontrol,LFC）问题,及保持互联电网系统频率、联络线功率及区域控制误差（area control error,ACE）的稳定,根据闭环系统谐振峰值与系统响应最大峰值之间的关系,构建一个与系统参数及控制器参数都相关的优化问题,通过该问题的求解获得控制器参数与系统参数之间的数学关系,针对水轮发电系统非最小相位特性,通过串加比例–微分（proportional-derivative,PD）控制方式降低系统阶次,设计尼科尔斯（Nichols）曲线的比例–积分–微分（proportional-integral-derivative,PID）控制器。基于模型参数扰动和负荷干扰的仿真结果表明：尼科尔斯PID控制器能快速调整系统频率偏差、联络线功率偏差及ACE为0,具有良好的鲁棒性能和抗负荷干扰性能,系统过渡过程性能明显优于传统PID调节器结果。展开更多
The graded density impactor(GDI)dynamic loading technique is crucial for acquiring the dynamic physical property parameters of materials used in weapons.The accuracy and timeliness of GDI structural design are key to ...The graded density impactor(GDI)dynamic loading technique is crucial for acquiring the dynamic physical property parameters of materials used in weapons.The accuracy and timeliness of GDI structural design are key to achieving controllable stress-strain rate loading.In this study,we have,for the first time,combined one-dimensional fluid computational software with machine learning methods.We first elucidated the mechanisms by which GDI structures control stress and strain rates.Subsequently,we constructed a machine learning model to create a structure-property response surface.The results show that altering the loading velocity and interlayer thickness has a pronounced regulatory effect on stress and strain rates.In contrast,the impedance distribution index and target thickness have less significant effects on stress regulation,although there is a matching relationship between target thickness and interlayer thickness.Compared with traditional design methods,the machine learning approach offers a10^(4)—10^(5)times increase in efficiency and the potential to achieve a global optimum,holding promise for guiding the design of GDI.展开更多
Analyzes the mechanism of overvoltage when contactless tap changer switch which is applied in distributing transformer converted directly.When the device convert the tap off,it employs the way that the SSR is switche...Analyzes the mechanism of overvoltage when contactless tap changer switch which is applied in distributing transformer converted directly.When the device convert the tap off,it employs the way that the SSR is switched on when voltage through zero and switched off when current through zero.But in the experiment we found that overvoltage will occur in the process of changing tap changer.The paper illustrates the mechanism of overvoltage in theory by analyzing the equivalent circuit and using analytic method of transition process.展开更多
The frequent change in ice drift direction poses a significant challenge for turret moored ship in ice. Variability in ice drift is mainly caused by the winds and currents. To solve this problem, a new method with num...The frequent change in ice drift direction poses a significant challenge for turret moored ship in ice. Variability in ice drift is mainly caused by the winds and currents. To solve this problem, a new method with numerical simulation based on heading control is applied to reduce the risk of operation of The Arctic Tandem Offloading Terminal(ATOT),which includes an offloading icebreaker(OIB) moored to a submerged turret and a shuttle tanker moored at the stern of the OIB in this paper. An icebreaking tanker, MT Uikku, was modeled in a simulation program. Then the level ice load on the tanker was calculated with different ice thicknesses and drift speeds, after which a heading controller assisted with mooring system is used to simulate the horizontal motion of the tanker under the ice action.展开更多
The automatic chain shell magazine is the primary subassembly of the automatic ammunition loading system of a big-caliber howitzer. Due to the change of the shell amount in the magazine during firing, its positioning ...The automatic chain shell magazine is the primary subassembly of the automatic ammunition loading system of a big-caliber howitzer. Due to the change of the shell amount in the magazine during firing, its positioning control is a kind of control problem of systems with uncertain parameters. In order to realize accurate control of shell position, an optimal guaranteed cost control algorithm based on linear matrix inequality (LMI) theory was put forward. The motion equations of the magazine were built, and the motion equations for four special load situations were linearized; according to the basic theory of the guaranteed cost control, the motion equations were written as the standard forms for linear uncertain systems; the optimal guaranteed cost control law for the position control of the magazine was obtained by use of LMI toolbox in MATLAB package. Using this control law, the controlled dynamic simulation of the shell magazine was carried out. The simulation results indicate that the control algorithm has high control precision.展开更多
利用Lyapunov稳定性分析方法研究一类具有传输时滞的采样负荷频率控制(load frequency control,LFC)系统的稳定性问题。首先,使用PI控制策略,建立时滞相关变量和时滞无关变量分离的采样LFC系统闭环模型。其次,基于闭环函数方法,构造一...利用Lyapunov稳定性分析方法研究一类具有传输时滞的采样负荷频率控制(load frequency control,LFC)系统的稳定性问题。首先,使用PI控制策略,建立时滞相关变量和时滞无关变量分离的采样LFC系统闭环模型。其次,基于闭环函数方法,构造一个新的包含更多系统时滞和采样信息的增广闭环型Lyapunov泛函。再次,使用积分不等式估计Lyapunov泛函导数中的二次型积分项,获得一个低保性的时滞和采样周期相关稳定性新判据。最后,基于稳定判据讨论PI控制器参数与传输时滞或采样周期最大允许上界的关系,揭示传输时滞对采样周期最大允许上界以及对系统性能的影响,计算与仿真结果验证了所提方法的有效性和优越性。展开更多
为探究在集散式控制系统(distributed control system,DCS)危险排除过程中控制员不同信息搜索策略对排险任务绩效的影响及认知负荷的中介效应,基于虚拟现实技术、皮肤电采样和眼动追踪技术构建模拟DCS工控平台,招募20名相关专业被试参...为探究在集散式控制系统(distributed control system,DCS)危险排除过程中控制员不同信息搜索策略对排险任务绩效的影响及认知负荷的中介效应,基于虚拟现实技术、皮肤电采样和眼动追踪技术构建模拟DCS工控平台,招募20名相关专业被试参与模拟排险实验并对其认知负荷及排险绩效进行量化,使用眼动轨迹匹配法判断被试的信息搜索模式,研究认知负荷的中介效应及中介机理。研究结果表明:不同信息搜索策略会显著影响任务绩效;认知负荷对该影响的中介效应高达89.66%,表明信息搜索策略主要通过影响认知负荷来间接作用于排险任务绩效,认知负荷越高,任务绩效越低;逻辑系统搜索策略能通过高效图式匹配减少认知资源消耗,显著抑制认知负荷增长,任务绩效表现最佳;空间系统搜索较难抑制认知负荷,任务绩效较差;随机搜索被试认知负荷显著高于其他组,绩效表现最差;此外,不同认知负荷水平下被试的信息搜索策略没有明显转变倾向。研究结果可为DCS控制人员的考核和培训提供理论支撑。展开更多
新型脉冲功率设备对直流侧母线电压提出较高的性能要求,为减小脉冲负载对直流电压波动率的影响,建立带脉冲负载三相整流器拓扑结构及数学模型,并在现有无源控制(passivity based control,PBC)设计的基础上,以保证系统稳定性为前提,提出...新型脉冲功率设备对直流侧母线电压提出较高的性能要求,为减小脉冲负载对直流电压波动率的影响,建立带脉冲负载三相整流器拓扑结构及数学模型,并在现有无源控制(passivity based control,PBC)设计的基础上,以保证系统稳定性为前提,提出注入虚拟储能的无源控制算法(virtual energy storage injection PBC,VESI-PBC),该算法以提高能量函数收敛速度为目标,可有效降低直流母线电压波动率,提高抗负载扰动能力。分别基于根轨迹法和时域分析法,讨论VESI-PBC引入储能矩阵后,增大虚拟电感值L_(n)对系统的稳定性和动态性能的影响。为满足直流侧性能要求和保证系统稳定性,利用脉冲负载对直流电压波动率的影响规律,提出L_(n)自适应选取函数f(f_(PL)),使L_(n)自适应平衡系统高频毛刺和低频强脉冲冲击的不同需求。最后,通过仿真及实际试验,验证VESI-PBC算法对减小直流母线电压波动率的有效性,并指出该算法的实质是控制内环电流超前响应直流电压的动态变化及其变化趋势,由此具有较强的抗负载扰动能力,适用于负载脉冲功率等级高、动态特性强烈的场合。展开更多
基金Project(61166004) supported by the National Natural Science Foundation of ChinaProject(09ZCGHHZ00200) supported by the International Scientific and Technological Cooperation Program of Science and Technology Plan of Tianjin,ChinaProject(UF10028Y)supported by the Doctoral Scientific Research Foundation for Guilin University of Electronic Technology,China
文摘A CMOS active mixer based on voltage control load technique which can operate at 1.0 V supply voltage was proposed, and its operation principle, noise and linearity analysis were also presented. Contrary to the conventional Gilbert-type mixer which is based on RF current-commutating, the load impedance in this proposed mixer is controlled by the LO signal, and it has only two stacked transistors at each branch which is suitable for low voltage applications. The mixer was designed and fabricated in 0.18 tam CMOS process for 2.4 GHz ISM band applications. With an input of 2.44 GHz RF signal and 2.442 GHz LO signal, the measurement specifications of the proposed mixer are： the conversion gain （Gc） is 5.3 dB, the input-referred third-order intercept point （PIIP3） is 4.6 dBm, the input-referred 1 dB compression point （P1dB） is --7.4 dBm, and the single-sideband noise figure （NFSSB） is 21.7 dB.
文摘The design and the realization of missile wings and rudders loading simulation system based on digital signal processor (DSP) TMS320LF2407 and direct torque control (DTC) servo driver ACS600 are discussed. The structure and opration principle for the system are presented. Speediness and elimination of superabundant torque are two key difficulties for electric loading simulation system. The method which can eliminate the superabundant torque is researched. Test results show the airflow resistance when missile wings and rudders are spreading can be rapidly simulated with high accuracy.
文摘为解决互联水电系统负荷频率控制（load frequencycontrol,LFC）问题,及保持互联电网系统频率、联络线功率及区域控制误差（area control error,ACE）的稳定,根据闭环系统谐振峰值与系统响应最大峰值之间的关系,构建一个与系统参数及控制器参数都相关的优化问题,通过该问题的求解获得控制器参数与系统参数之间的数学关系,针对水轮发电系统非最小相位特性,通过串加比例–微分（proportional-derivative,PD）控制方式降低系统阶次,设计尼科尔斯（Nichols）曲线的比例–积分–微分（proportional-integral-derivative,PID）控制器。基于模型参数扰动和负荷干扰的仿真结果表明：尼科尔斯PID控制器能快速调整系统频率偏差、联络线功率偏差及ACE为0,具有良好的鲁棒性能和抗负荷干扰性能,系统过渡过程性能明显优于传统PID调节器结果。
基金supported by the Guangdong Major Project of Basic and Applied Basic Research(Grant No.2021B0301030001)the National Key Research and Development Program of China(Grant No.2021YFB3802300)the Foundation of National Key Laboratory of Shock Wave and Detonation Physics(Grant No.JCKYS2022212004)。
文摘The graded density impactor(GDI)dynamic loading technique is crucial for acquiring the dynamic physical property parameters of materials used in weapons.The accuracy and timeliness of GDI structural design are key to achieving controllable stress-strain rate loading.In this study,we have,for the first time,combined one-dimensional fluid computational software with machine learning methods.We first elucidated the mechanisms by which GDI structures control stress and strain rates.Subsequently,we constructed a machine learning model to create a structure-property response surface.The results show that altering the loading velocity and interlayer thickness has a pronounced regulatory effect on stress and strain rates.In contrast,the impedance distribution index and target thickness have less significant effects on stress regulation,although there is a matching relationship between target thickness and interlayer thickness.Compared with traditional design methods,the machine learning approach offers a10^(4)—10^(5)times increase in efficiency and the potential to achieve a global optimum,holding promise for guiding the design of GDI.
基金Harbin science an technology officecontract num ber is 0 0 112 110 98
文摘Analyzes the mechanism of overvoltage when contactless tap changer switch which is applied in distributing transformer converted directly.When the device convert the tap off,it employs the way that the SSR is switched on when voltage through zero and switched off when current through zero.But in the experiment we found that overvoltage will occur in the process of changing tap changer.The paper illustrates the mechanism of overvoltage in theory by analyzing the equivalent circuit and using analytic method of transition process.
文摘The frequent change in ice drift direction poses a significant challenge for turret moored ship in ice. Variability in ice drift is mainly caused by the winds and currents. To solve this problem, a new method with numerical simulation based on heading control is applied to reduce the risk of operation of The Arctic Tandem Offloading Terminal(ATOT),which includes an offloading icebreaker(OIB) moored to a submerged turret and a shuttle tanker moored at the stern of the OIB in this paper. An icebreaking tanker, MT Uikku, was modeled in a simulation program. Then the level ice load on the tanker was calculated with different ice thicknesses and drift speeds, after which a heading controller assisted with mooring system is used to simulate the horizontal motion of the tanker under the ice action.
文摘The automatic chain shell magazine is the primary subassembly of the automatic ammunition loading system of a big-caliber howitzer. Due to the change of the shell amount in the magazine during firing, its positioning control is a kind of control problem of systems with uncertain parameters. In order to realize accurate control of shell position, an optimal guaranteed cost control algorithm based on linear matrix inequality (LMI) theory was put forward. The motion equations of the magazine were built, and the motion equations for four special load situations were linearized; according to the basic theory of the guaranteed cost control, the motion equations were written as the standard forms for linear uncertain systems; the optimal guaranteed cost control law for the position control of the magazine was obtained by use of LMI toolbox in MATLAB package. Using this control law, the controlled dynamic simulation of the shell magazine was carried out. The simulation results indicate that the control algorithm has high control precision.
文摘利用Lyapunov稳定性分析方法研究一类具有传输时滞的采样负荷频率控制(load frequency control,LFC)系统的稳定性问题。首先,使用PI控制策略,建立时滞相关变量和时滞无关变量分离的采样LFC系统闭环模型。其次,基于闭环函数方法,构造一个新的包含更多系统时滞和采样信息的增广闭环型Lyapunov泛函。再次,使用积分不等式估计Lyapunov泛函导数中的二次型积分项,获得一个低保性的时滞和采样周期相关稳定性新判据。最后,基于稳定判据讨论PI控制器参数与传输时滞或采样周期最大允许上界的关系,揭示传输时滞对采样周期最大允许上界以及对系统性能的影响,计算与仿真结果验证了所提方法的有效性和优越性。
文摘为探究在集散式控制系统(distributed control system,DCS)危险排除过程中控制员不同信息搜索策略对排险任务绩效的影响及认知负荷的中介效应,基于虚拟现实技术、皮肤电采样和眼动追踪技术构建模拟DCS工控平台,招募20名相关专业被试参与模拟排险实验并对其认知负荷及排险绩效进行量化,使用眼动轨迹匹配法判断被试的信息搜索模式,研究认知负荷的中介效应及中介机理。研究结果表明:不同信息搜索策略会显著影响任务绩效;认知负荷对该影响的中介效应高达89.66%,表明信息搜索策略主要通过影响认知负荷来间接作用于排险任务绩效,认知负荷越高,任务绩效越低;逻辑系统搜索策略能通过高效图式匹配减少认知资源消耗,显著抑制认知负荷增长,任务绩效表现最佳;空间系统搜索较难抑制认知负荷,任务绩效较差;随机搜索被试认知负荷显著高于其他组,绩效表现最差;此外,不同认知负荷水平下被试的信息搜索策略没有明显转变倾向。研究结果可为DCS控制人员的考核和培训提供理论支撑。
文摘新型脉冲功率设备对直流侧母线电压提出较高的性能要求,为减小脉冲负载对直流电压波动率的影响,建立带脉冲负载三相整流器拓扑结构及数学模型,并在现有无源控制(passivity based control,PBC)设计的基础上,以保证系统稳定性为前提,提出注入虚拟储能的无源控制算法(virtual energy storage injection PBC,VESI-PBC),该算法以提高能量函数收敛速度为目标,可有效降低直流母线电压波动率,提高抗负载扰动能力。分别基于根轨迹法和时域分析法,讨论VESI-PBC引入储能矩阵后,增大虚拟电感值L_(n)对系统的稳定性和动态性能的影响。为满足直流侧性能要求和保证系统稳定性,利用脉冲负载对直流电压波动率的影响规律,提出L_(n)自适应选取函数f(f_(PL)),使L_(n)自适应平衡系统高频毛刺和低频强脉冲冲击的不同需求。最后,通过仿真及实际试验,验证VESI-PBC算法对减小直流母线电压波动率的有效性,并指出该算法的实质是控制内环电流超前响应直流电压的动态变化及其变化趋势,由此具有较强的抗负载扰动能力,适用于负载脉冲功率等级高、动态特性强烈的场合。
