In order to address the current inability of screen printing to monitor printing pressure online,an online printing pressure monitoring system applied to screen printing machines was designed in this study.In this stu...In order to address the current inability of screen printing to monitor printing pressure online,an online printing pressure monitoring system applied to screen printing machines was designed in this study.In this study,the consistency of printed electrodes was measured by using a confocal microscope and the pressure distribution detected by online pressure monitoring system was compared to investigate the relationship.The results demonstrated the relationship between printing pressure and the consistency of printed electrodes.As printing pressure increases,the ink layer at the corresponding position becomes thicker and that higher printing pressure enhances the consistency of the printed electrodes.The experiment confirms the feasibility of the online pressure monitoring system,which aids in predicting and controlling the consistency of printed electrodes,thereby improving their performance.展开更多
Objective To observe the value of grey-level histogram analysis based on T2WI for differentiating consistency of meningioma.Methods Data of 109 patients with meningioma were retrospectively analyzed.The patients were ...Objective To observe the value of grey-level histogram analysis based on T2WI for differentiating consistency of meningioma.Methods Data of 109 patients with meningioma were retrospectively analyzed.The patients were divided into hard group(n=71)and soft group(n=38)according to the consistency of tumors.Tumor ROI was outlined on axial T2WI showing the largest tumor section,gray levels were extracted and histogram analysis was performed.The value of each histogram parameter were compared between groups.Then receiver operating characteristic curve was drawn,and the area under the curve(AUC)was calculated to evaluate the efficiency for differentiating soft and hard meningioma.Results P 1,P 10,P 50,P 90,P 99 and the mean grey levels on T2WI in soft group were all higher than those in hard group(all P<0.05),while the variance,the kurtosis and the skewness were not significantly different between groups(all P>0.05).The differentiating efficiency of P 1,P 10,P 50,P 90,P 99 and the mean grey levels on T2WI were all fine,with AUC of 0.774 to 0.833,and no significant difference was found(all P>0.05).Conclusion Parameters of grey-level histogram analysis such as P 1,P 10,P 50,P 90,P 99 and the mean values based on T2WI were all valuable for differentiating soft and hard meningioma.展开更多
The weighted arithmetical mean complex judgement matrix （WAMCJM） is the most common method for aggregating group opinions, but it has a shortcoming, namely the WAMCJM of the perfectly consistent judgement matrices g...The weighted arithmetical mean complex judgement matrix （WAMCJM） is the most common method for aggregating group opinions, but it has a shortcoming, namely the WAMCJM of the perfectly consistent judgement matrices given by experts canot guarantee its perfect consistency. An upper bound of the WAMCJM＇s consistency is presented. Simultaneously, a compatibility index of judging the aggregating extent of group opinions is also introduced. The WAMCJM is of acceptable consistency and is proved provided the compatibilities of all judgement matrices given by experts are smaller than the threshold value of acceptable consistency. These conclusions are important to group decision making.展开更多
Reliability enhancement testing(RET) is an accelerated testing which hastens the performance degradation process to surface its inherent defects of design and manufacture. It is an important hypothesis that the degrad...Reliability enhancement testing(RET) is an accelerated testing which hastens the performance degradation process to surface its inherent defects of design and manufacture. It is an important hypothesis that the degradation mechanism of the RET is the same as the one of the normal stress condition. In order to check the consistency of two mechanisms, we conduct two enhancement tests with a missile servo system as an object of the study, and preprocess two sets of test data to establish the accelerated degradation models regarding the temperature change rate that is assumed to be the main applied stress of the servo system during the natural storage. Based on the accelerated degradation models and natural storage profile of the servo system, we provide and demonstrate a procedure to check the consistency of two mechanisms by checking the correlation and difference of two sets of degradation data. The results indicate that the two degradation mechanisms are significantly consistent with each other.展开更多
The purpose of this study is to investigate and quantify some possible sources of dispersion of 120 mm APFSDS tank ammunition both experimentally and numerically.This paper aims to point out the most influential sourc...The purpose of this study is to investigate and quantify some possible sources of dispersion of 120 mm APFSDS tank ammunition both experimentally and numerically.This paper aims to point out the most influential source during In-Bore Balloting Motion phase as well as in External Ballistics phase of the ammunition and quantifies its effect on dispersion.Data obtained from flight trials is critically analysed and parameters affecting dispersion such as initial yaw/pitch rates,yaw/pitch dampening,plane start angle,launch spin,clearance,centre of gravity shift,dynamic imbalance angle,cross wind,etc.are observed and,later on,studied in detail by extensive External Ballistics Monte Carlo(EBMC)simulation and Six Degree of Freedom(6-DOF)trajectory analysis.In Bore Balloting Motion simulation shows that reduction in residual spin by about 5%results in drastic56%reduction in first maximum yaw.A correlation between first maximum yaw and residual spin is observed.Results of data analysis are used in design modification for existing ammunition.Number of designs are evaluated numerically before freezing five designs for further soundings.These designs are critically assessed in terms of their comparative performance during In-bore travel&external ballistics phase.Results are validated by free flight trials for the finalised design.展开更多
Although either absolute speed or speed difference can be considered as a measure for speed consistency, few researches consider both in practice. The factor analysis method was introduced to extract an optimal number...Although either absolute speed or speed difference can be considered as a measure for speed consistency, few researches consider both in practice. The factor analysis method was introduced to extract an optimal number of factors from numerous original measures. The freeway diverging zone was divided into four elements, namely the upstream, the diverge area, the downstream and the exit ramp. Operating speeds together with individual vehicle speeds were collected at each element with radar guns. Following the factor analysis procedure, two factors, which explain 96.722% of the variance in the original data, were retained from the initial seven speed measures. According to the loadings after Varimax rotation, the two factors are clearly classified into two categories. The first category is named "speed scale" reflecting the absolute speed, and the other one is named "speed dispersion" interpreting speed discreteness. Then, the weighted score of speed consistency for each diverge area is given in terms of linear combination of the two retained factors. To facilitate the level classification of speed consistency, the weighted scores are normalized in the range of (0, 1.0). The criterion for speed consistency classification is given as 0≤F N <0.30, good consistency; 0.30≤F N <0.60, fair consistency; 0.60≤ F N ≤1.00, poor consistency. The validation by comparing with previously developed measures shows that the proposed measure is acceptable in evaluating speed consistency.展开更多
A fundamental premise of an accelerated testing is that the failure mechanism under elevated and normal stress levels should remain the same. Thus, verification of the consistency of failure mechanisms is essential du...A fundamental premise of an accelerated testing is that the failure mechanism under elevated and normal stress levels should remain the same. Thus, verification of the consistency of failure mechanisms is essential during an accelerated testing. A new consistency analysis method based on the gray theory is pro- posed for complex products. First of all, existing consistency ana- lysis methods are reviewed with a focus on the comparison of the differences among them. Then, the proposed consistency ana- lysis method is introduced. Two effective gray prediction models, gray dynamic model and new information and equal dimensional （NIED） model, are adapted in the proposed method. The process to determine the dimension of NIED model is also discussed, and a decision rule is expanded. Based on that, the procedure of ap- plying the new consistent analysis method is developed. Finally, a case study of the consistency analysis of a reliability enhancement testing is conducted to demonstrate and validate the proposed method.展开更多
A new consistency control method for jet dispensing is proposed. First, the working parameters, namely, viscosity, supply pressure and supply time, are experimentally investigated. Then, the glue viscosity is approxim...A new consistency control method for jet dispensing is proposed. First, the working parameters, namely, viscosity, supply pressure and supply time, are experimentally investigated. Then, the glue viscosity is approximated by a polynomial model using the least square method. Based on this model and temperatme control implemented using the Dahlin principle, the viscosity of the glue can be maintained at a constant value. Then, the viscosity model of the glue is applied to deriving the droplet mass as the nominal model of the temperature controller. The robustness of the temperature controller is analyzed by applying the small gain theory. The glue supply pressure controller is designed using the consistency control strategy, and the robustness is analyzed. Finall）, simulations and experiments are conducted using a jet dispensing control system. The results show that the proposed control strategy can significantly improve the droplet consistency.展开更多
Maintaining temporal consistency of real-time data is important for cyber-physical systems.Most of the previous studies focus on uniprocessor systems.In this paper,the problem of temporal consistency maintenance on mu...Maintaining temporal consistency of real-time data is important for cyber-physical systems.Most of the previous studies focus on uniprocessor systems.In this paper,the problem of temporal consistency maintenance on multiprocessor platforms with instance skipping was formulated based on the(m,k)-constrained model.A partitioned scheduling method SC-AD was proposed to solve the problem.SC-AD uses a derived sufficient schedulability condition to calculate the initial value of m for each sensor transaction.It then partitions the transactions among the processors in a balanced way.To further reduce the average relative invalid time of real-time data,SC-AD judiciously increases the values of m for transactions assigned to each processor.Experiment results show that SC-AD outperforms the baseline methods in terms of the average relative invalid time and the average valid ratio under different system workloads.展开更多
图像异常检测旨在识别并定位图像中的异常区域,针对现有算法中不同层次特征信息利用不充分的问题,提出了基于多层次特征融合网络的图像异常检测算法。通过使用融合了异常先验知识的伪异常数据生成算法,对训练集进行了异常数据扩充,将异...图像异常检测旨在识别并定位图像中的异常区域,针对现有算法中不同层次特征信息利用不充分的问题,提出了基于多层次特征融合网络的图像异常检测算法。通过使用融合了异常先验知识的伪异常数据生成算法,对训练集进行了异常数据扩充,将异常检测任务转化为监督学习任务;构建了多层次特征融合网络,将神经网络中不同层次特征进行融合,丰富了特征中的低层纹理信息和高层语义信息,使得用于异常检测的特征更具区分性;训练时,设计了分数约束损失和一致性约束损失,并结合特征约束损失对整个网络模型进行训练。实验结果表明,MVTec数据集上图像级检测接收机工作特性曲线下面积(area under the receiver operating characteristic, AUROC)平均值为98.7%,像素级定位AUROC平均值为97.9%,每区域重叠率平均值为94.2%,均高于现有的异常检测算法。展开更多
文摘In order to address the current inability of screen printing to monitor printing pressure online,an online printing pressure monitoring system applied to screen printing machines was designed in this study.In this study,the consistency of printed electrodes was measured by using a confocal microscope and the pressure distribution detected by online pressure monitoring system was compared to investigate the relationship.The results demonstrated the relationship between printing pressure and the consistency of printed electrodes.As printing pressure increases,the ink layer at the corresponding position becomes thicker and that higher printing pressure enhances the consistency of the printed electrodes.The experiment confirms the feasibility of the online pressure monitoring system,which aids in predicting and controlling the consistency of printed electrodes,thereby improving their performance.
文摘Objective To observe the value of grey-level histogram analysis based on T2WI for differentiating consistency of meningioma.Methods Data of 109 patients with meningioma were retrospectively analyzed.The patients were divided into hard group(n=71)and soft group(n=38)according to the consistency of tumors.Tumor ROI was outlined on axial T2WI showing the largest tumor section,gray levels were extracted and histogram analysis was performed.The value of each histogram parameter were compared between groups.Then receiver operating characteristic curve was drawn,and the area under the curve(AUC)was calculated to evaluate the efficiency for differentiating soft and hard meningioma.Results P 1,P 10,P 50,P 90,P 99 and the mean grey levels on T2WI in soft group were all higher than those in hard group(all P<0.05),while the variance,the kurtosis and the skewness were not significantly different between groups(all P>0.05).The differentiating efficiency of P 1,P 10,P 50,P 90,P 99 and the mean grey levels on T2WI were all fine,with AUC of 0.774 to 0.833,and no significant difference was found(all P>0.05).Conclusion Parameters of grey-level histogram analysis such as P 1,P 10,P 50,P 90,P 99 and the mean values based on T2WI were all valuable for differentiating soft and hard meningioma.
基金the National Natural Science Foundation of China (705250047047103570121001).
文摘The weighted arithmetical mean complex judgement matrix （WAMCJM） is the most common method for aggregating group opinions, but it has a shortcoming, namely the WAMCJM of the perfectly consistent judgement matrices given by experts canot guarantee its perfect consistency. An upper bound of the WAMCJM＇s consistency is presented. Simultaneously, a compatibility index of judging the aggregating extent of group opinions is also introduced. The WAMCJM is of acceptable consistency and is proved provided the compatibilities of all judgement matrices given by experts are smaller than the threshold value of acceptable consistency. These conclusions are important to group decision making.
基金supported by the Natural Science Foundation of Hunan Province(2018JJ2282)
文摘Reliability enhancement testing(RET) is an accelerated testing which hastens the performance degradation process to surface its inherent defects of design and manufacture. It is an important hypothesis that the degradation mechanism of the RET is the same as the one of the normal stress condition. In order to check the consistency of two mechanisms, we conduct two enhancement tests with a missile servo system as an object of the study, and preprocess two sets of test data to establish the accelerated degradation models regarding the temperature change rate that is assumed to be the main applied stress of the servo system during the natural storage. Based on the accelerated degradation models and natural storage profile of the servo system, we provide and demonstrate a procedure to check the consistency of two mechanisms by checking the correlation and difference of two sets of degradation data. The results indicate that the two degradation mechanisms are significantly consistent with each other.
文摘The purpose of this study is to investigate and quantify some possible sources of dispersion of 120 mm APFSDS tank ammunition both experimentally and numerically.This paper aims to point out the most influential source during In-Bore Balloting Motion phase as well as in External Ballistics phase of the ammunition and quantifies its effect on dispersion.Data obtained from flight trials is critically analysed and parameters affecting dispersion such as initial yaw/pitch rates,yaw/pitch dampening,plane start angle,launch spin,clearance,centre of gravity shift,dynamic imbalance angle,cross wind,etc.are observed and,later on,studied in detail by extensive External Ballistics Monte Carlo(EBMC)simulation and Six Degree of Freedom(6-DOF)trajectory analysis.In Bore Balloting Motion simulation shows that reduction in residual spin by about 5%results in drastic56%reduction in first maximum yaw.A correlation between first maximum yaw and residual spin is observed.Results of data analysis are used in design modification for existing ammunition.Number of designs are evaluated numerically before freezing five designs for further soundings.These designs are critically assessed in terms of their comparative performance during In-bore travel&external ballistics phase.Results are validated by free flight trials for the finalised design.
基金Project(2012CB725400) supported by the National Key Basic Research Program of ChinaProject(2012AA112304) supported by the National High Technology Research and Development Program of ChinaProject(2009BAG13A07-5) supported by National Science and Technology Plan of Action of China for Traffic Safety
文摘Although either absolute speed or speed difference can be considered as a measure for speed consistency, few researches consider both in practice. The factor analysis method was introduced to extract an optimal number of factors from numerous original measures. The freeway diverging zone was divided into four elements, namely the upstream, the diverge area, the downstream and the exit ramp. Operating speeds together with individual vehicle speeds were collected at each element with radar guns. Following the factor analysis procedure, two factors, which explain 96.722% of the variance in the original data, were retained from the initial seven speed measures. According to the loadings after Varimax rotation, the two factors are clearly classified into two categories. The first category is named "speed scale" reflecting the absolute speed, and the other one is named "speed dispersion" interpreting speed discreteness. Then, the weighted score of speed consistency for each diverge area is given in terms of linear combination of the two retained factors. To facilitate the level classification of speed consistency, the weighted scores are normalized in the range of (0, 1.0). The criterion for speed consistency classification is given as 0≤F N <0.30, good consistency; 0.30≤F N <0.60, fair consistency; 0.60≤ F N ≤1.00, poor consistency. The validation by comparing with previously developed measures shows that the proposed measure is acceptable in evaluating speed consistency.
基金supported by the National Natural Science Foundation of China(61104132)
文摘A fundamental premise of an accelerated testing is that the failure mechanism under elevated and normal stress levels should remain the same. Thus, verification of the consistency of failure mechanisms is essential during an accelerated testing. A new consistency analysis method based on the gray theory is pro- posed for complex products. First of all, existing consistency ana- lysis methods are reviewed with a focus on the comparison of the differences among them. Then, the proposed consistency ana- lysis method is introduced. Two effective gray prediction models, gray dynamic model and new information and equal dimensional （NIED） model, are adapted in the proposed method. The process to determine the dimension of NIED model is also discussed, and a decision rule is expanded. Based on that, the procedure of ap- plying the new consistent analysis method is developed. Finally, a case study of the consistency analysis of a reliability enhancement testing is conducted to demonstrate and validate the proposed method.
基金Project(2011CB013104)supported by the National Basic Research Program of China
文摘A new consistency control method for jet dispensing is proposed. First, the working parameters, namely, viscosity, supply pressure and supply time, are experimentally investigated. Then, the glue viscosity is approximated by a polynomial model using the least square method. Based on this model and temperatme control implemented using the Dahlin principle, the viscosity of the glue can be maintained at a constant value. Then, the viscosity model of the glue is applied to deriving the droplet mass as the nominal model of the temperature controller. The robustness of the temperature controller is analyzed by applying the small gain theory. The glue supply pressure controller is designed using the consistency control strategy, and the robustness is analyzed. Finall）, simulations and experiments are conducted using a jet dispensing control system. The results show that the proposed control strategy can significantly improve the droplet consistency.
基金Project(2020JJ4032)supported by the Hunan Provincial Natural Science Foundation of China。
文摘Maintaining temporal consistency of real-time data is important for cyber-physical systems.Most of the previous studies focus on uniprocessor systems.In this paper,the problem of temporal consistency maintenance on multiprocessor platforms with instance skipping was formulated based on the(m,k)-constrained model.A partitioned scheduling method SC-AD was proposed to solve the problem.SC-AD uses a derived sufficient schedulability condition to calculate the initial value of m for each sensor transaction.It then partitions the transactions among the processors in a balanced way.To further reduce the average relative invalid time of real-time data,SC-AD judiciously increases the values of m for transactions assigned to each processor.Experiment results show that SC-AD outperforms the baseline methods in terms of the average relative invalid time and the average valid ratio under different system workloads.
文摘图像异常检测旨在识别并定位图像中的异常区域,针对现有算法中不同层次特征信息利用不充分的问题,提出了基于多层次特征融合网络的图像异常检测算法。通过使用融合了异常先验知识的伪异常数据生成算法,对训练集进行了异常数据扩充,将异常检测任务转化为监督学习任务;构建了多层次特征融合网络,将神经网络中不同层次特征进行融合,丰富了特征中的低层纹理信息和高层语义信息,使得用于异常检测的特征更具区分性;训练时,设计了分数约束损失和一致性约束损失,并结合特征约束损失对整个网络模型进行训练。实验结果表明,MVTec数据集上图像级检测接收机工作特性曲线下面积(area under the receiver operating characteristic, AUROC)平均值为98.7%,像素级定位AUROC平均值为97.9%,每区域重叠率平均值为94.2%,均高于现有的异常检测算法。
