The state of clean sand was mainly dependent on its void ratio(density)and confining stress that greatly influenced the mechanical behavior(compression,dilatancy and liquefaction)of clean sand.Confirming whether the c...The state of clean sand was mainly dependent on its void ratio(density)and confining stress that greatly influenced the mechanical behavior(compression,dilatancy and liquefaction)of clean sand.Confirming whether the confining stress was a state variable of sand required precise element tests at different confining stress,especially the tests under very low confining stress whose test data were very limited.In this study,static-dynamic characteristics of clean sand was comprehensively investigated by a unified test program under low and normal confining stress ranging from 5 to 98 kPa,under monotonic/cyclic and drained/undrained conditions,together with the literature available data under confining stress of 1.0 to 3.0 MPa.For monotonic loading tests,the contraction/dilation phase transition was observed for loose sand at low confining stress,and dilatancy angles were stress-dependent.In addition,the liquefaction resistance was observed to increase with reducing of confining stress,and the axial strain varied from compressive to dilative when confining stress increased.Special attention was also paid to the enhancement effect of membrane,and it was observed that its influence on the test results was limited.In addition,the experimental results were proved reliable by reproducibility.展开更多
Combined with numerical simulation, the influence of confining stress on cutting process, fracture conditions and cutting efficiencies of soft and hard rock has been conducted on the triaxial testing machine(TRW-3000)...Combined with numerical simulation, the influence of confining stress on cutting process, fracture conditions and cutting efficiencies of soft and hard rock has been conducted on the triaxial testing machine(TRW-3000) designed and manufactured in Central South University(China). Results are obtained by performing analysis on the fracture scopes of cement and granite plates,the characteristics of cutting force in cutting processes and the cutting efficiency. Firstly, the increase of latitude fracture scope and the decrease of longitude fracture scope are both more notable in the tests conducted on cement plates subjected to the increasing confining stresses; secondly, the increase tendency of peak penetration forces obtained from tests conducted on granite plates is more obvious, however, the increase tendencies of average penetration forces achieved from cement and granite plates are close to each other; thirdly, the cutting efficiency could be improved by increasing the spacing between cutters when the confining stress which acts on soft and hard rock increases in a certain degree, and the cutting efficiency of soft rock is more sensitive to the varying confining stresses.展开更多
基金Projects(51908288,41627801)supported by the National Natural Science Foundation of China。
文摘The state of clean sand was mainly dependent on its void ratio(density)and confining stress that greatly influenced the mechanical behavior(compression,dilatancy and liquefaction)of clean sand.Confirming whether the confining stress was a state variable of sand required precise element tests at different confining stress,especially the tests under very low confining stress whose test data were very limited.In this study,static-dynamic characteristics of clean sand was comprehensively investigated by a unified test program under low and normal confining stress ranging from 5 to 98 kPa,under monotonic/cyclic and drained/undrained conditions,together with the literature available data under confining stress of 1.0 to 3.0 MPa.For monotonic loading tests,the contraction/dilation phase transition was observed for loose sand at low confining stress,and dilatancy angles were stress-dependent.In addition,the liquefaction resistance was observed to increase with reducing of confining stress,and the axial strain varied from compressive to dilative when confining stress increased.Special attention was also paid to the enhancement effect of membrane,and it was observed that its influence on the test results was limited.In addition,the experimental results were proved reliable by reproducibility.
基金Project(2013CB035401)supported by the National Basic Research Program of ChinaProject(51174228)supported by the National Natural Science Foundation of China+1 种基金Project(201304)supported by Open Research Fund of Hunan Province Key Laboratory of Safe Mining Techniques of Coal Mines(Hunan University of Science and Technology),ChinaProject(14C0746)supported by the Education Department of Hunan Province,China
文摘Combined with numerical simulation, the influence of confining stress on cutting process, fracture conditions and cutting efficiencies of soft and hard rock has been conducted on the triaxial testing machine(TRW-3000) designed and manufactured in Central South University(China). Results are obtained by performing analysis on the fracture scopes of cement and granite plates,the characteristics of cutting force in cutting processes and the cutting efficiency. Firstly, the increase of latitude fracture scope and the decrease of longitude fracture scope are both more notable in the tests conducted on cement plates subjected to the increasing confining stresses; secondly, the increase tendency of peak penetration forces obtained from tests conducted on granite plates is more obvious, however, the increase tendencies of average penetration forces achieved from cement and granite plates are close to each other; thirdly, the cutting efficiency could be improved by increasing the spacing between cutters when the confining stress which acts on soft and hard rock increases in a certain degree, and the cutting efficiency of soft rock is more sensitive to the varying confining stresses.
