Relay作为LTE-Advanced系统关键技术之一,可以为运营商提供灵活、快捷的网络部署手段,提高网络的覆盖和容量。本文在分析比较各种Relay技术方案的基础上,着重分析了3GPP对于Type I Relay和Type II Relay的定义及功能,并结合3GPP Rel.10...Relay作为LTE-Advanced系统关键技术之一,可以为运营商提供灵活、快捷的网络部署手段,提高网络的覆盖和容量。本文在分析比较各种Relay技术方案的基础上,着重分析了3GPP对于Type I Relay和Type II Relay的定义及功能,并结合3GPP Rel.10标准化进展,重点介绍Type IRelay在LTE-Advanced系统中的方案设计。展开更多
The network performance and the unmanned aerial vehicle(UAV)number are important objectives when UAVs are placed as communication relays to enhance the multi-agent information exchange.The problem is a non-determinist...The network performance and the unmanned aerial vehicle(UAV)number are important objectives when UAVs are placed as communication relays to enhance the multi-agent information exchange.The problem is a non-deterministic polynomial hard(NP-hard)multi-objective optimization problem,instead of generating a Pareto solution,this work focuses on considering both objectives at the same level so as to achieve a balanced solution between them.Based on the property that agents connected to the same UAV are a cluster,two clustering-based algorithms,M-K-means(MKM)and modified fast search and find density of peaks(MFSFDP)methods,are first proposed.Since the former algorithm requires too much computational time and the latter one requires too many relays,an algorithm for the balanced network performance and relay number(BPN)is proposed by discretizing the area to avoid missing the optimal relay positions and defining a new local density function to reflect the network performance metric.Simulation results demonstrate that the proposed algorithms are feasible and effective.Comparisons between these algorithms show that the BPN algorithm uses fewer relay UAVs than the MFSFDP and classic set-covering based algorithm,and its computational time is far less than the MKM algorithm.展开更多
A joint power control and relay selection scheme is considered for a cooperative and cognitive radio system where a secondary network shares spectrum with the primary network. In the secondary network, two secondary u...A joint power control and relay selection scheme is considered for a cooperative and cognitive radio system where a secondary network shares spectrum with the primary network. In the secondary network, two secondary users （SUs） communicate with each other via an assist relay. The main point is to provide the best system performance to SUs while maintaining the interference power at primary user （PU） under a certain level. Using convex optimization, a closed-form solution is obtained when optimizing the power allocation among the two nodes and relay. Based on this result, a joint power control and relay selection scheme with fewer variable dimensions is proposed to maximize the achievable rate of the secondary system. Simulation results demonstrate that the sum rate of the cognitive two-way relay network increases compared with a random relay selection and fixed power allocation.展开更多
The brief arts and crafts of the ordinary fourdrinier are introduced first. After the intractable points of paper basis weight (BW) control are analyzed, an autotuning PID/PI control algorithm based on relay feedback ...The brief arts and crafts of the ordinary fourdrinier are introduced first. After the intractable points of paper basis weight (BW) control are analyzed, an autotuning PID/PI control algorithm based on relay feedback identification is proposed, which has such advantages as simple parameter adjustment, little dependence on process model, strong robustness and easiness to implementation. And it is very suitable for controlling such processes as BW loop with large time delay.展开更多
In order to provide relay communication supports for future Chinese lunar exploration program,Queqiao-2 relay communication satellite was developed.Queqiao-2 can perform scientific observations with three kinds of sci...In order to provide relay communication supports for future Chinese lunar exploration program,Queqiao-2 relay communication satellite was developed.Queqiao-2 can perform scientific observations with three kinds of scientific instruments on board.The system design of Queqiao-2,including mission orbit and transfer orbit design,configuration and layout design,housekeeping and information flow design,power supply and distribution design,GNC and propulsion system design,communication links design,etc.,was accomplished through comprehensive tradeoff and evaluation on technical maturity,availability,schedule,cost,and so on.With a view to reducing development risk,both the platform and relay communication payloads were developed based on significant heritage from previous Queqiao relay satellite and other relevant spacecraft.Queqiao-2 features flexible system architecture to support multiple frequencies,modulations,data rates and software reconfigurations to meet new user requirements.Subsequent to a successful launch on March 20,2024,by means of 5 orbit maneuvers,Queqiao-2 was inserted into a highly elliptical frozen mission orbit around the moon with a 24h period on schedule.Following on-orbit tests and calibrations,Queqiao-2 has possessed the capacity to provide reliable relay communication services to multiple lunar exploration missions,as well as the capacity to perform scientific observations.Under the support of Queqiao-2,Chang′e-6 achieved its ambitious mission goal to collect and return samples from the moon′s mysterious far side.In the meanwhile,Queqiao-2 has also paved the way for the following Chinese lunar exploration missions including Chang′e-7 and Chang′e-8.The design life time of Queqiao-2 is more than 8 years.Benefit from flexibility and extensibility of relay communication system design,it is convenient to provide relay communication services for future lunar exploration missions of both China and other countries.In addition,innovative scientific observations would be performed during the period that no relay communication task is arranged.The system design of Queqiao-2 reflects the development philosophy of technical innovations and inheritance integration.Based on highly flexible and extensible system architecture,multiple and concurrent relay communication mission requirements can be met.It can provide strong supports for future lunar exploration missions.Successful launching,orbit entering and on-orbit tests of Queqiao-2 verified the correct design principle and versatility.By means of Queqiao-2,more innovative scientific outcomes are anticipated and lunar exploration activities can be facilitated.展开更多
The new techniques were presented for preventing undesirable distance relay maloperation during voltage collapse and power swings in transmission grids. Initially, the work focused on the development of a fast detecti...The new techniques were presented for preventing undesirable distance relay maloperation during voltage collapse and power swings in transmission grids. Initially, the work focused on the development of a fast detection of voltage collapse and a three-phase fault at transmission lines by using under impedance fault detector (UIFD) and support vector machine (SVM). Likewise, an intelligent approach was developed to discriminate a fault, stable swing and unstable swing, for correct distance relay operation by using the S-transform and the probabilistic neural network (PNN). To illustrate the effectiveness of the proposed techniques, simulations were carried out on the IEEE 39-bus test system using the PSS/E and MATLAB software.展开更多
This paper studies a multiple unmanned aerial vehicle(UAV)relaying communication system,where multiple UAV re-lays assist the blocked communication between a group of ground users(GUs)and a base station(BS).Since the ...This paper studies a multiple unmanned aerial vehicle(UAV)relaying communication system,where multiple UAV re-lays assist the blocked communication between a group of ground users(GUs)and a base station(BS).Since the UAVs only have limited-energy in practice,our design aims to maximize the energy efficiency(EE)through jointly designing the communica-tion scheduling,the transmit power allocation,as well as UAV trajectory under the buffer constraint over a given flight period.Actually,the formulated fractional optimization problem is diffi-cult to be solved in general because of non-convexity.To re-solve this difficulty,an efficient iterative algorithm is proposed based on the block coordinate descent(BCD)and successive convex approximation(SCA)techniques,as well as the Dinkel-bach’s algorithm.Specifically,the optimization variables of the formulated problem are divided into three blocks and we alter-nately optimize each block of the variables over iteration.Numeri-cal results verify the convergence of the proposed iterative al-gorithm and show that the proposed designs achieve significant EE gain,which outperform other benchmark schemes.展开更多
An optimal cooperative beamforming for the amplify-and-forward (AF) MIMO two-way relay channels was designed. Supposing the channel state information (CSI) was perfectly known by the receiver and transmitter as well a...An optimal cooperative beamforming for the amplify-and-forward (AF) MIMO two-way relay channels was designed. Supposing the channel state information (CSI) was perfectly known by the receiver and transmitter as well as the relay, optimal beamforming vectors (matrices) of all nodes were jointly designed based on the criterion of minimizing the sum mean square errors (MSMSE). The analysis result shows that the performance effect of transmitting and receiving beamforming pairs is to maximize the receive signal-to-noise ratio (SNR) at two communication nodes, and the rank of the optimal relay beamforming matrix is no larger than two when there is only one data stream at each source node. A simplified algorithm was put forward to accomplish the design based on the analysis conclusions. Simulation results provide that the system performance, which is characterized in terms of bit error rates (BER), is significantly improved by cooperative beamforming, and the performance of the simplified method is not only very close to the optimal one but also with faster iteration speed and much lower computational complexity.展开更多
Several large-scale wind turbine tripping accidents occurred in Jiuquan wind power base in 2011.According to the on-site survey and analysis of these accidents related to relay protection,causes were found to be the c...Several large-scale wind turbine tripping accidents occurred in Jiuquan wind power base in 2011.According to the on-site survey and analysis of these accidents related to relay protection,causes were found to be the collection system defects and low correct operation rate of small current grounded line selectors of the unearthed neutral point collection system.By referring to both the characteristics of Jiuquan wind power base and arrangement of relay protection,the short-circuit features of wind power and its impacts on relay protection are analyzed.The collection system and the retrofit of the small current grounded line selector are improved by specific countermeasures.Finally,further research subjects are put forward.展开更多
In order to save energy consumption of two-way amplifier forward(AF) relaying with channel estimation error, an energy efficiency enhancement scheme is proposed in this work. Firstly, through the analysis of two-way A...In order to save energy consumption of two-way amplifier forward(AF) relaying with channel estimation error, an energy efficiency enhancement scheme is proposed in this work. Firstly, through the analysis of two-way AF relaying mode with channel estimation error, the resultant instantaneous SNRs at end nodes is obtained. Then, by using a high SNR approximation, outage possibility is acquired and its simple closed-form expression is represented. Specially, for using the energy resource more efficiently, a low-complexity power allocation and transmission mode selection policy is proposed to enhance the energy efficiency of two-way AF relay system. Finally, relay priority region is identified in which cooperative diversity energy gain can be achieved. The computer simulations are presented to verify our analytical results, indicating that the proposed policy outperforms direct transmission by an energy gain of 3 dB at the relative channel estimation error less than 0.001. The results also show that the two-way AF relaying transmission loses the two-way AF relaying transmission loses its superiority to direct transmission in terms of energy efficiency when channel estimation error reaches 0.03.展开更多
Based on the study of ore deposits and orebody structures of two sedimentary-exhalative ore deposits, i.e., Changba and Xitieshan Ore Deposits, it is found that the structural patterns of metallogenic basin of seafloo...Based on the study of ore deposits and orebody structures of two sedimentary-exhalative ore deposits, i.e., Changba and Xitieshan Ore Deposits, it is found that the structural patterns of metallogenic basin of seafloor exhalative sulfide deposits in the ancient graben systems are controlled by relay structures in normal faults. The shapes of metallogenic basins are composed of tilting ramp, fault-tip ramp and relay ramp, which dominate migration of gravity current of ore-hosted fluid and shape of orebody sedimentary fan in the ramp. By measuring and comparing the difference of length-to-thickness ratios of orebody sedimentary fan, the result shows that the occurrence of the ramp has a remarkable impact on the shape of orebody.展开更多
In order to efficiently mitigate error propagation and reduce computational complexity, this paper proposes a scheme for traditional cooperative networks, named as dual-threshold symbol selective demodulate-and-forwar...In order to efficiently mitigate error propagation and reduce computational complexity, this paper proposes a scheme for traditional cooperative networks, named as dual-threshold symbol selective demodulate-and-forward. In the scheme, two log likelihood ratio(LLR)-based thresholds are devised to measure the reliability of received signals for the relay and the destination, respectively. One of the threshold guarantees that the relay only forwards reliable symbols, thus less error will be propagated to the destination. The other threshold is used at the destination for determining the reliability of symbols received from the source.The destination will directly demodulate reliable symbols received from the source. Otherwise, when the symbols received from the source are not reliable, the maximum ratio combiner(MRC) is used to combine symbols received from the source and the relay.Closed-form expression of the bit error probability(BEP) of the proposed scheme is derived and analyzed under binary phase shift keying(BPSK) modulation. Then, the relationship and closed-form solutions of two LLR-based thresholds are derived. Simulation results prove that the theoretical BEP of the proposed scheme closely matches the simulated ones. The proposed scheme can achieve high performance with low computational complexity compared to existing schemes.展开更多
With the development of large-scale complicated modern power systems, the requirement for the associated protection scheme tends to be more stringent and its combination more complex. However, it is very difficult to ...With the development of large-scale complicated modern power systems, the requirement for the associated protection scheme tends to be more stringent and its combination more complex. However, it is very difficult to figure out the factors of failure of such systems. This paper proposes a Petri net model of a transmission line protection relaying system, including three types of relays as well as an automatic reclosing device, and shows how to diagnose serial failure of the system by analyzing invariant sets of the model. Furthermore, it gives four basic types of failure sequences and its execution is much more intuitive and effective than the traditional method.展开更多
In this paper, a bit error ratio(BER)-based relay selection strategy is investigated under opportunistic relay selection.The challenging problem is to design the relay selection rule so that the relay is able to measu...In this paper, a bit error ratio(BER)-based relay selection strategy is investigated under opportunistic relay selection.The challenging problem is to design the relay selection rule so that the relay is able to measure the performance of the cooperative system at the destination exactly with low computation costs.This paper derives a closed-form expression of the end-to-end bit error rate firstly. Then, an approximate BER expression based on the relationship between the instantaneous signal-to-noise ratio(SNR) of the relay-to-destination link and the probability of error propagation is derived. Finally, a simplified relay selection formula is proposed. Simulation results prove that the proposed relay selection rule can reflect the BER of each relay properly as well.展开更多
Different schemes, which performed channel, power and time allocation to enhance the network performance of overall end-to-end throughput for cooperative cognitive radio network, were investigated. Interference temper...Different schemes, which performed channel, power and time allocation to enhance the network performance of overall end-to-end throughput for cooperative cognitive radio network, were investigated. Interference temperature limit of corresponding primary users was considered. Due to the constraints caused by multiple dual channels, the power allocation problem is non-convex and NP-hard. Based on geometric programming (GP), a novel and general algorithm, which turned the problem into a series of GP problems by logarithm approximation (LASGP), was proposed to efficiently solve it. Numerical results verify the efficiency and availability of the LASGP algorithm. Solutions of LASGP are provably convergent and globally optimal point can be observed as well as the channel allocation always outperforms power or timeslot allocation from simulations. Compared with schemes without any allocation, the scheme with joint channel, power and timeslot allocation significantly increases the overall end-to-end throughput by no less than 70% under same simulation conditions. This scheme can not only maximize the throughput by increasing total maximum power of relay node, but also outperform other resource allocation schemes when lower total maximum power of source and relay nodes is restricted. As the total maximum power of source node increases, the scheme with joint channel and timeslot allocation performs best in all schemes.展开更多
文摘Relay作为LTE-Advanced系统关键技术之一,可以为运营商提供灵活、快捷的网络部署手段,提高网络的覆盖和容量。本文在分析比较各种Relay技术方案的基础上,着重分析了3GPP对于Type I Relay和Type II Relay的定义及功能,并结合3GPP Rel.10标准化进展,重点介绍Type IRelay在LTE-Advanced系统中的方案设计。
基金the National Natural Science Foundation of China(61573285)。
文摘The network performance and the unmanned aerial vehicle(UAV)number are important objectives when UAVs are placed as communication relays to enhance the multi-agent information exchange.The problem is a non-deterministic polynomial hard(NP-hard)multi-objective optimization problem,instead of generating a Pareto solution,this work focuses on considering both objectives at the same level so as to achieve a balanced solution between them.Based on the property that agents connected to the same UAV are a cluster,two clustering-based algorithms,M-K-means(MKM)and modified fast search and find density of peaks(MFSFDP)methods,are first proposed.Since the former algorithm requires too much computational time and the latter one requires too many relays,an algorithm for the balanced network performance and relay number(BPN)is proposed by discretizing the area to avoid missing the optimal relay positions and defining a new local density function to reflect the network performance metric.Simulation results demonstrate that the proposed algorithms are feasible and effective.Comparisons between these algorithms show that the BPN algorithm uses fewer relay UAVs than the MFSFDP and classic set-covering based algorithm,and its computational time is far less than the MKM algorithm.
基金supported by the National Natural Science Foundation of China (61250005)Jiangxi Postdoctoral Science Foundation(2013KY07)
文摘A joint power control and relay selection scheme is considered for a cooperative and cognitive radio system where a secondary network shares spectrum with the primary network. In the secondary network, two secondary users （SUs） communicate with each other via an assist relay. The main point is to provide the best system performance to SUs while maintaining the interference power at primary user （PU） under a certain level. Using convex optimization, a closed-form solution is obtained when optimizing the power allocation among the two nodes and relay. Based on this result, a joint power control and relay selection scheme with fewer variable dimensions is proposed to maximize the achievable rate of the secondary system. Simulation results demonstrate that the sum rate of the cognitive two-way relay network increases compared with a random relay selection and fixed power allocation.
基金This project was supported by the National Key Project in the Ninth Fivc-Year Plan(97-619-02-03).
文摘The brief arts and crafts of the ordinary fourdrinier are introduced first. After the intractable points of paper basis weight (BW) control are analyzed, an autotuning PID/PI control algorithm based on relay feedback identification is proposed, which has such advantages as simple parameter adjustment, little dependence on process model, strong robustness and easiness to implementation. And it is very suitable for controlling such processes as BW loop with large time delay.
文摘In order to provide relay communication supports for future Chinese lunar exploration program,Queqiao-2 relay communication satellite was developed.Queqiao-2 can perform scientific observations with three kinds of scientific instruments on board.The system design of Queqiao-2,including mission orbit and transfer orbit design,configuration and layout design,housekeeping and information flow design,power supply and distribution design,GNC and propulsion system design,communication links design,etc.,was accomplished through comprehensive tradeoff and evaluation on technical maturity,availability,schedule,cost,and so on.With a view to reducing development risk,both the platform and relay communication payloads were developed based on significant heritage from previous Queqiao relay satellite and other relevant spacecraft.Queqiao-2 features flexible system architecture to support multiple frequencies,modulations,data rates and software reconfigurations to meet new user requirements.Subsequent to a successful launch on March 20,2024,by means of 5 orbit maneuvers,Queqiao-2 was inserted into a highly elliptical frozen mission orbit around the moon with a 24h period on schedule.Following on-orbit tests and calibrations,Queqiao-2 has possessed the capacity to provide reliable relay communication services to multiple lunar exploration missions,as well as the capacity to perform scientific observations.Under the support of Queqiao-2,Chang′e-6 achieved its ambitious mission goal to collect and return samples from the moon′s mysterious far side.In the meanwhile,Queqiao-2 has also paved the way for the following Chinese lunar exploration missions including Chang′e-7 and Chang′e-8.The design life time of Queqiao-2 is more than 8 years.Benefit from flexibility and extensibility of relay communication system design,it is convenient to provide relay communication services for future lunar exploration missions of both China and other countries.In addition,innovative scientific observations would be performed during the period that no relay communication task is arranged.The system design of Queqiao-2 reflects the development philosophy of technical innovations and inheritance integration.Based on highly flexible and extensible system architecture,multiple and concurrent relay communication mission requirements can be met.It can provide strong supports for future lunar exploration missions.Successful launching,orbit entering and on-orbit tests of Queqiao-2 verified the correct design principle and versatility.By means of Queqiao-2,more innovative scientific outcomes are anticipated and lunar exploration activities can be facilitated.
文摘The new techniques were presented for preventing undesirable distance relay maloperation during voltage collapse and power swings in transmission grids. Initially, the work focused on the development of a fast detection of voltage collapse and a three-phase fault at transmission lines by using under impedance fault detector (UIFD) and support vector machine (SVM). Likewise, an intelligent approach was developed to discriminate a fault, stable swing and unstable swing, for correct distance relay operation by using the S-transform and the probabilistic neural network (PNN). To illustrate the effectiveness of the proposed techniques, simulations were carried out on the IEEE 39-bus test system using the PSS/E and MATLAB software.
基金supported by the National Natural Science Foundation of China(61671474).
文摘This paper studies a multiple unmanned aerial vehicle(UAV)relaying communication system,where multiple UAV re-lays assist the blocked communication between a group of ground users(GUs)and a base station(BS).Since the UAVs only have limited-energy in practice,our design aims to maximize the energy efficiency(EE)through jointly designing the communica-tion scheduling,the transmit power allocation,as well as UAV trajectory under the buffer constraint over a given flight period.Actually,the formulated fractional optimization problem is diffi-cult to be solved in general because of non-convexity.To re-solve this difficulty,an efficient iterative algorithm is proposed based on the block coordinate descent(BCD)and successive convex approximation(SCA)techniques,as well as the Dinkel-bach’s algorithm.Specifically,the optimization variables of the formulated problem are divided into three blocks and we alter-nately optimize each block of the variables over iteration.Numeri-cal results verify the convergence of the proposed iterative al-gorithm and show that the proposed designs achieve significant EE gain,which outperform other benchmark schemes.
基金Project(60902092)supported by the National Natural Science Foundation of China
文摘An optimal cooperative beamforming for the amplify-and-forward (AF) MIMO two-way relay channels was designed. Supposing the channel state information (CSI) was perfectly known by the receiver and transmitter as well as the relay, optimal beamforming vectors (matrices) of all nodes were jointly designed based on the criterion of minimizing the sum mean square errors (MSMSE). The analysis result shows that the performance effect of transmitting and receiving beamforming pairs is to maximize the receive signal-to-noise ratio (SNR) at two communication nodes, and the rank of the optimal relay beamforming matrix is no larger than two when there is only one data stream at each source node. A simplified algorithm was put forward to accomplish the design based on the analysis conclusions. Simulation results provide that the system performance, which is characterized in terms of bit error rates (BER), is significantly improved by cooperative beamforming, and the performance of the simplified method is not only very close to the optimal one but also with faster iteration speed and much lower computational complexity.
基金supported by National High Technology Research and Development Program of China(863Program)(No.2011AA05A104)
文摘Several large-scale wind turbine tripping accidents occurred in Jiuquan wind power base in 2011.According to the on-site survey and analysis of these accidents related to relay protection,causes were found to be the collection system defects and low correct operation rate of small current grounded line selectors of the unearthed neutral point collection system.By referring to both the characteristics of Jiuquan wind power base and arrangement of relay protection,the short-circuit features of wind power and its impacts on relay protection are analyzed.The collection system and the retrofit of the small current grounded line selector are improved by specific countermeasures.Finally,further research subjects are put forward.
基金Project(IRT0852) supported by the Program for Changjiang Scholars and Innovative Research Team in University,ChinaProject(2012CB316100) supported by the National Basic Research Program of China+2 种基金Projects(61101144,61101145) supported by the National Natural Science Foundation of ChinaProject(B08038) supported by the "111" Project,ChinaProject(K50510010017) supported by the Fundamental Research Funds for the Central Universities,China
文摘In order to save energy consumption of two-way amplifier forward(AF) relaying with channel estimation error, an energy efficiency enhancement scheme is proposed in this work. Firstly, through the analysis of two-way AF relaying mode with channel estimation error, the resultant instantaneous SNRs at end nodes is obtained. Then, by using a high SNR approximation, outage possibility is acquired and its simple closed-form expression is represented. Specially, for using the energy resource more efficiently, a low-complexity power allocation and transmission mode selection policy is proposed to enhance the energy efficiency of two-way AF relay system. Finally, relay priority region is identified in which cooperative diversity energy gain can be achieved. The computer simulations are presented to verify our analytical results, indicating that the proposed policy outperforms direct transmission by an energy gain of 3 dB at the relative channel estimation error less than 0.001. The results also show that the two-way AF relaying transmission loses the two-way AF relaying transmission loses its superiority to direct transmission in terms of energy efficiency when channel estimation error reaches 0.03.
文摘Based on the study of ore deposits and orebody structures of two sedimentary-exhalative ore deposits, i.e., Changba and Xitieshan Ore Deposits, it is found that the structural patterns of metallogenic basin of seafloor exhalative sulfide deposits in the ancient graben systems are controlled by relay structures in normal faults. The shapes of metallogenic basins are composed of tilting ramp, fault-tip ramp and relay ramp, which dominate migration of gravity current of ore-hosted fluid and shape of orebody sedimentary fan in the ramp. By measuring and comparing the difference of length-to-thickness ratios of orebody sedimentary fan, the result shows that the occurrence of the ramp has a remarkable impact on the shape of orebody.
基金supported by the National High Technology Research and Development Program of China(863 Program)(2014AA2649)
文摘In order to efficiently mitigate error propagation and reduce computational complexity, this paper proposes a scheme for traditional cooperative networks, named as dual-threshold symbol selective demodulate-and-forward. In the scheme, two log likelihood ratio(LLR)-based thresholds are devised to measure the reliability of received signals for the relay and the destination, respectively. One of the threshold guarantees that the relay only forwards reliable symbols, thus less error will be propagated to the destination. The other threshold is used at the destination for determining the reliability of symbols received from the source.The destination will directly demodulate reliable symbols received from the source. Otherwise, when the symbols received from the source are not reliable, the maximum ratio combiner(MRC) is used to combine symbols received from the source and the relay.Closed-form expression of the bit error probability(BEP) of the proposed scheme is derived and analyzed under binary phase shift keying(BPSK) modulation. Then, the relationship and closed-form solutions of two LLR-based thresholds are derived. Simulation results prove that the theoretical BEP of the proposed scheme closely matches the simulated ones. The proposed scheme can achieve high performance with low computational complexity compared to existing schemes.
文摘With the development of large-scale complicated modern power systems, the requirement for the associated protection scheme tends to be more stringent and its combination more complex. However, it is very difficult to figure out the factors of failure of such systems. This paper proposes a Petri net model of a transmission line protection relaying system, including three types of relays as well as an automatic reclosing device, and shows how to diagnose serial failure of the system by analyzing invariant sets of the model. Furthermore, it gives four basic types of failure sequences and its execution is much more intuitive and effective than the traditional method.
基金supported by the Pre-Research Foundation of China。
文摘In this paper, a bit error ratio(BER)-based relay selection strategy is investigated under opportunistic relay selection.The challenging problem is to design the relay selection rule so that the relay is able to measure the performance of the cooperative system at the destination exactly with low computation costs.This paper derives a closed-form expression of the end-to-end bit error rate firstly. Then, an approximate BER expression based on the relationship between the instantaneous signal-to-noise ratio(SNR) of the relay-to-destination link and the probability of error propagation is derived. Finally, a simplified relay selection formula is proposed. Simulation results prove that the proposed relay selection rule can reflect the BER of each relay properly as well.
基金Project(60902092) supported by the National Natural Science Foundation of China
文摘Different schemes, which performed channel, power and time allocation to enhance the network performance of overall end-to-end throughput for cooperative cognitive radio network, were investigated. Interference temperature limit of corresponding primary users was considered. Due to the constraints caused by multiple dual channels, the power allocation problem is non-convex and NP-hard. Based on geometric programming (GP), a novel and general algorithm, which turned the problem into a series of GP problems by logarithm approximation (LASGP), was proposed to efficiently solve it. Numerical results verify the efficiency and availability of the LASGP algorithm. Solutions of LASGP are provably convergent and globally optimal point can be observed as well as the channel allocation always outperforms power or timeslot allocation from simulations. Compared with schemes without any allocation, the scheme with joint channel, power and timeslot allocation significantly increases the overall end-to-end throughput by no less than 70% under same simulation conditions. This scheme can not only maximize the throughput by increasing total maximum power of relay node, but also outperform other resource allocation schemes when lower total maximum power of source and relay nodes is restricted. As the total maximum power of source node increases, the scheme with joint channel and timeslot allocation performs best in all schemes.
