A simple and facile gas chromatography-mass spectrometer （GC-MS） fingerprint of Su-He-Xiang-Wan （SHXW） was developed, the similarity analysis was conducted, and attribution of the major characteristic peaks was id...A simple and facile gas chromatography-mass spectrometer （GC-MS） fingerprint of Su-He-Xiang-Wan （SHXW） was developed, the similarity analysis was conducted, and attribution of the major characteristic peaks was identified for SHXW quality control. GC-MS analysis was performed on a QP2010 instrument （Shimadzu, Japan） equipped with a capillary column of RTX-5MS. The column temperature was initiated at 50℃, held for 5 min, increased at the rate of 3 ℃/min to 120 ℃, held for 2 min, and then increased at the rate of 4 ℃/min to 220℃, held for 10 min. Helium carrier gas was used at a constant flow rate of 1.3 mL/min. Mass conditions were ionization voltage, 70 eV; injector temperature, 250℃; ion source temperature, 250 ℃; splitting ratio, 30：1; full scan mode in the 40-500 Da mass ranges with rate of 0.2 s per scan. Attribution of the major characteristic peaks was identified for SHXW by comparing the chemical standards, references of Chinese herbal medicines and the negative controls of prescription samples （NC） of SHXW. With the help of the temperature-programmed retention indices （PTRIs） used together with mass spectra and chemical standards, 25 major characteristic peaks have been identified. Nine volatile medicinal materials were identified in the prescription of SHXW by attributing to the 27 major characteristic peaks. The results demonstrate that the proposed method is a powerful approach to quality control of complex herbal medicines.展开更多
Effects of butanol isomers on characteristics of combustion and emission were studied on PFI SI engine. Experiments were operated under the condition of 3 and 5 bar brake mean effective pressure (BMEP) engine loads an...Effects of butanol isomers on characteristics of combustion and emission were studied on PFI SI engine. Experiments were operated under the condition of 3 and 5 bar brake mean effective pressure (BMEP) engine loads and different equivalence ratios (φ=0.83-1.25) with engine speed of 1200 r/min using blends made of 70 vol.% gasoline and 30 vol.% butanol isomers (N30, S30, I30 and T30). The results indicated that compared with gasoline, all butanol isomer blends have higher cylinder pressure. N30 has the highest and most advanced peak pressure, and T30 shows a higher brake specific fuel consumption (BSFC) and lower brake thermal efficiency (BTE). N30 presents a lower UHC emissions and I30 has slightly higher CO emissions than other blends. For unregulated emissions, compared with gasoline, butanol isomer blends have higher acetaldehyde, and N30 produces a higher emission of 1,3-butadiene than other blends. A reduction in benzene, toluene, ethylbenzene and xylene (BTEX) has been found with butanol isomer blends.展开更多
Eight fatty acids from beaver oil were identified by GC-9A, and their contents were determinded. A simple yet effective method for separation and quantification was described. Contents of the fatty acids were related ...Eight fatty acids from beaver oil were identified by GC-9A, and their contents were determinded. A simple yet effective method for separation and quantification was described. Contents of the fatty acids were related to their conditions of extraction.展开更多
基金Foundation item： Projects（21275164, 21075138） supported by the National Natural Science Foundation of China
文摘A simple and facile gas chromatography-mass spectrometer （GC-MS） fingerprint of Su-He-Xiang-Wan （SHXW） was developed, the similarity analysis was conducted, and attribution of the major characteristic peaks was identified for SHXW quality control. GC-MS analysis was performed on a QP2010 instrument （Shimadzu, Japan） equipped with a capillary column of RTX-5MS. The column temperature was initiated at 50℃, held for 5 min, increased at the rate of 3 ℃/min to 120 ℃, held for 2 min, and then increased at the rate of 4 ℃/min to 220℃, held for 10 min. Helium carrier gas was used at a constant flow rate of 1.3 mL/min. Mass conditions were ionization voltage, 70 eV; injector temperature, 250℃; ion source temperature, 250 ℃; splitting ratio, 30：1; full scan mode in the 40-500 Da mass ranges with rate of 0.2 s per scan. Attribution of the major characteristic peaks was identified for SHXW by comparing the chemical standards, references of Chinese herbal medicines and the negative controls of prescription samples （NC） of SHXW. With the help of the temperature-programmed retention indices （PTRIs） used together with mass spectra and chemical standards, 25 major characteristic peaks have been identified. Nine volatile medicinal materials were identified in the prescription of SHXW by attributing to the 27 major characteristic peaks. The results demonstrate that the proposed method is a powerful approach to quality control of complex herbal medicines.
基金Projects(51776016,51606006) supported by the National Natural Science Foundation of ChinaProjects(3172025,3182030) supported by Beijing Natural Science Foundation,China+4 种基金Project(2017YFB0103401) supported by National Key Research and Development ProgramProject(NELMS2017A10) funded by the National Engineering Laboratory for Mobile Source Emission Control Technology,ChinaProject(2018RC017) supported by the Talents Foundation of Beijing Jiaotong University,ChinaProject(DE-EE0006864) supported by the Department of EnergyProject(201507090044) supported by China Scholarship Council
文摘Effects of butanol isomers on characteristics of combustion and emission were studied on PFI SI engine. Experiments were operated under the condition of 3 and 5 bar brake mean effective pressure (BMEP) engine loads and different equivalence ratios (φ=0.83-1.25) with engine speed of 1200 r/min using blends made of 70 vol.% gasoline and 30 vol.% butanol isomers (N30, S30, I30 and T30). The results indicated that compared with gasoline, all butanol isomer blends have higher cylinder pressure. N30 has the highest and most advanced peak pressure, and T30 shows a higher brake specific fuel consumption (BSFC) and lower brake thermal efficiency (BTE). N30 presents a lower UHC emissions and I30 has slightly higher CO emissions than other blends. For unregulated emissions, compared with gasoline, butanol isomer blends have higher acetaldehyde, and N30 produces a higher emission of 1,3-butadiene than other blends. A reduction in benzene, toluene, ethylbenzene and xylene (BTEX) has been found with butanol isomer blends.
文摘Eight fatty acids from beaver oil were identified by GC-9A, and their contents were determinded. A simple yet effective method for separation and quantification was described. Contents of the fatty acids were related to their conditions of extraction.
