Energy performance assessment on central air-conditioning system is essential to optimize operating, reduce operating costs, improve indoor environmental quality, and determine whether the retrofitting of the equipmen...Energy performance assessment on central air-conditioning system is essential to optimize operating, reduce operating costs, improve indoor environmental quality, and determine whether the retrofitting of the equipment is necessary. But it is difficult to evaluate it reasonably and comprehensively due to its complexity. A "holistic" approach was discussed to evaluate the energy performance of central air-conditioning system for an extra-large commercial building in a subtropical city. All procedures were described in detail, including field investigation method, field measurement instruments, data processing and data analyzing. The main factors affecting energy consumption of air-conditioning system were analyzed and the annual cooling-energy use intensity of this building was calculated and also compared with other shopping malls and other types of buildings in Guangzhou. And COP(coefficient of performance) of chiller, water transfer factor of chilled water system and cooling water system were taken into consideration. At last, the thermal comfort and indoor air quality issues were addressed. The results show that the chilled water pumps are over-sized and the indoor environmental quality should be improved. The purpose of this work is to provide reference for energy performance assessment method for air-conditioning system.展开更多
This paper presented an entropy evaluation method for the influences of condense heat recovery system on the environment.Aiming at the damage of the condense heat to the environment,an entropy of resource loss and an ...This paper presented an entropy evaluation method for the influences of condense heat recovery system on the environment.Aiming at the damage of the condense heat to the environment,an entropy of resource loss and an emission entropy from the condense heat recovery system in the air conditioning refrigerating machine were introduced.For the evaluation of the entropies,we developed a new algorithm for the parameter identification,called the composite influence coefficient,based on the Least Squares Support Vector Machine method.By simulation,the numerical experiments shows that the Least Squares Support Vector Machine method is one of the powerful methods for the parameter identification to compute the damage entropy of the condense heat,with the largest training error being-0.025(the relative error being-3.56%),and the biggest test error being 0.015(the relative error being 2.5%).展开更多
To explore the relationship between summer office set air-conditioning temperature and energy consumption related to air conditioning use to provide human thermal comfort,a comparison experiment was conducted in three...To explore the relationship between summer office set air-conditioning temperature and energy consumption related to air conditioning use to provide human thermal comfort,a comparison experiment was conducted in three similar offices at temperatures of 24,26 and 28 ℃ respectively. A thermal comfort questionnaire survey was conducted. It is demonstrated that air-conditioner energy consumption at the set temperature of 28 ℃ is 113% and 271% lower than at 26 ℃ and 24 ℃,respectively. A linear relationship exists between air-conditioner energy consumption and the indoor and outdoor temperature difference. When comfortably dressed,over 80% of research participants accept the set temperature of 28 ℃. The regression analysis leads to a neutral temperature of 26.2 ℃ and an acceptable temperature of 28.2 ℃ for over 80% of the research participants subjects,indicating that the current 26 ℃ set temperature for offices in summer,required by Chinese General Office of the State Council,can be increased to 28 ℃. Moreover,analysis of predicted mean vote(PMV) index shows that a set temperature of 27 ℃,not 26 ℃,is sufficiently comfortable for office staff wearing long-sleeve shirts,long pants and leather shoes.展开更多
Two building factors-a longer thermal lag of more than one hour for building envelops and a lag of indoor radiation to convert into cooling load-have impact on the instantaneous heat input and instantaneous cooling lo...Two building factors-a longer thermal lag of more than one hour for building envelops and a lag of indoor radiation to convert into cooling load-have impact on the instantaneous heat input and instantaneous cooling load.So the two factors should be taken into account when selecting the weather parameters for air-conditioning system design.This paper developed a new statistic method for the rational selection of coincident solar irradiance,dry-bulb and wet-bulb temperatures.The method was applied to historic weather records of 25 years in Hong Kong to generate coincident design weather data.And the results show that traditional design solar irradiance,dry-bulb and wet-bulb temperatures may be significantly overestimated in many conditions,and the design weather data for the three different constructions is not kept constant.展开更多
In order to investigate the bacteria and fungi aerosol characteristic distribution in HVAC-system and its components at Shaanxi History Museum.Measurements were performed to probe the bacteria and fungi aerosol in HVA...In order to investigate the bacteria and fungi aerosol characteristic distribution in HVAC-system and its components at Shaanxi History Museum.Measurements were performed to probe the bacteria and fungi aerosol in HVAC systems,located at Xi'an city,China.The results showed that there was fungi growth inside the ventilation ducts,fungi contamination was worse than bacteria,and both of them were distributed into occupied space with the air supply ducts.The dominating genera of fungi was found to be Penicillium spp.and Aspergillus spp.,which was respectively 46.1% and 20.7% in settling fungi,and the dominating genera of fungi in dust were Cladosporium spp.and Penicillium spp.,which was 41.8% and 30.1% respectively.It suggests that available measures to improve and control the performance of HVAC-systems such as the maintenance,management and cleaning should be taken to prevent this pollution and to develop strategies to keep this pollution away.展开更多
The 3-D velocity tomography image of the central-eastern part of Qilianshan is obtained by the joint inversion of 3-D velocity structure and focal parameters based on the S-P data of micro-earthquakes recorded by the ...The 3-D velocity tomography image of the central-eastern part of Qilianshan is obtained by the joint inversion of 3-D velocity structure and focal parameters based on the S-P data of micro-earthquakes recorded by the digital seismic network set up for a Sino-French cooperation program since 1996. The inversed velocity structure does primarily reflect some important features of the deep structure in the region and provide the scientific background for the further study of active tectonic structure and the calculation of earthquake parameters.展开更多
The aim of this work is to develop a three-dimensional model of deep groove ball bearing to investigate the loaded stresses and central displacements of bearing rings. The equivalent stresses and central displacements...The aim of this work is to develop a three-dimensional model of deep groove ball bearing to investigate the loaded stresses and central displacements of bearing rings. The equivalent stresses and central displacements of bearing rings are obtained based on the simulated analysis. Moreover, several parameters, such as load magnitude, raceway groove curvature radius(RGCR), thicknesses of outer and inner rings, are varied to investigate their effects on the equivalent stresses and central displacements of bearing rings. Research results provide useful guidelines for determining the design parameters.展开更多
This paper presented a preliminary research on the central solar heating system with seasonal storage(CSHSSS)used in cold climate in China.A mathematical model of the solar energy seasonal storage water tank used in t...This paper presented a preliminary research on the central solar heating system with seasonal storage(CSHSSS)used in cold climate in China.A mathematical model of the solar energy seasonal storage water tank used in the central solar heating system was firstly developed based on energy conservation.This was followed by the simulation of the CSHSSS used in a two-floor villa in Harbin,and analysis of the impacts on storage water temperature of tank volume,solar collector area,tank burial depth,insulation thickness around the tank,etc.The results show there is a relatively economical tank volume to optimize the system efficiency,which decreases with increasing tank volume at the constant collector area,and increases with increasing collector area at the constant tank volume.Furthermore,the insulation thickness has obvious effect on avoiding heat loss,while the tank burial depth doesn't.In addition,the relationship between the solar collector efficiency and storage water temperature is also obtained,it decreases quickly with increasing storing water temperature,and then increases slowly after starting space heating system.These may be helpful for relevant design and optimization in cold climates in China and all over the world.展开更多
The Alpine zone of Central Pamir is elongated in sublatitudinal direction between the Hercynians of Northern Pamir and the Cimmerians of Southern Pamir south of the Vanch\|Akbaital thrust. Its western continuation is ...The Alpine zone of Central Pamir is elongated in sublatitudinal direction between the Hercynians of Northern Pamir and the Cimmerians of Southern Pamir south of the Vanch\|Akbaital thrust. Its western continuation is overthrusted by the Herat fault and its eastern continuation is cut by the Karakoram strike\|slip fault.. The Central Pamir is a mainly S\|vergent (at the southern part N\|vergent) Alpine nappe stack then folding in antiform. It comprises deposits from Vendian to Neogene which have a thickness of 10km. Paleozoic and Mesozoic tectonic activity was poorly displaied in its limits. Rifting took place in Early and probably Upper Paleozoic. Pre\|Upper Cretaceous unconformity is known only in southern (autochthonous) part of the Zone as a result of closing of Bangong\|Nu Jiang ocean. In northern (allochthonous) part of the zone the sequence of Mesozoic and Paleogene rocks has no unconformities. Alpine endogenous processes were developed very intensively. They implied nappes and imbricate structures, linear folding, different igneous activity, zonal metamorphism. Slices of pyroxenites and gabbroids occured. Calc\|alkaline lavas and tuffs constitutes the major part of Paleocene to Miocene sequence (andesites\|ryolites\|in Paleogene, alkaline basalts in Oligocene—Miocene). Oligocene—Miocene zonal metamorphic belt of the intermediate type of high pressure including series of granitegneiss domes can be traced along the Central Pamir. Cores of domes include migmatites and remobilized bodies of the Early Paleozoic gneissic granites. The decompression took place at a later stage and rocks were overprinted by the andalusite\|sillimanite type metamorphism.. Syenite and leucogranite bodies, pegmatite and aplite veins were emplaced.展开更多
The Altyn Tagh fault (ATF) extending in NEE—SWW direction lying at the northwestern boundary of Qinghai—Tibet plateau is the largest strike\|slip fault in Central Asia. On the basis of recent geologic mapping and de...The Altyn Tagh fault (ATF) extending in NEE—SWW direction lying at the northwestern boundary of Qinghai—Tibet plateau is the largest strike\|slip fault in Central Asia. On the basis of recent geologic mapping and detailed study of lithotectonic characteristics for the paleotectonic units at the two sides of the Altyn Tagh Fault ( Altun Mt. to west and the Qilian Mt. to east ) we propose that the paleotectonic units in the Altun Mt. can be correlated with those in the Qilian Mt. assuming 400km left\|lateral displacement for the Altyn Tagh fault. Natural seismic data across the Altun Mt. indicate that the Altyn Tagh fault is a lithospheric shear fault and the lithospheric shearing is probably related to southward intracontinental oblique subduction of the Tarim terrane beneath the Altun Mt.1\ Comparison of the major paleotectonic units at the two sides of the Altyn Tagh fault\;(1) The Alxa\|Dunhuang Massif:The Alxa massif lying at the southern margin of the Sino\|Korean craton consists mainly of an Early Proterozoic basement including high\|grade and middle\|grade metamorphic rocks, which were intruded by granite at 1719Ma. The Paleozoic passive margin sediments is well developed. In the Altun Mt., the Early Proterozoic and late Archean basement of the Duhuang massif includes high\|grade and middle\|grade metamorphic rocks dating 2789Ma (Sm\|Nd method) and 2405Ma (U\|Pb method).展开更多
The central buckle, which is often used in a suspension bridge, can improve bridges' performance in the actual operation condition. The influence of the central buckle on natural vibration characteristics and brid...The central buckle, which is often used in a suspension bridge, can improve bridges' performance in the actual operation condition. The influence of the central buckle on natural vibration characteristics and bridge-deck driving comfort of a long-span suspension bridge is studied by using a case study of Siduhe Suspension Bridge in China. Based on the finite element software ANSYS and independently complied program, the influence of the central buckle on the structure force-applied characteristics of a long-span suspension bridge has been explored. The results show that the huge increases of natural frequencies can result in the presence of central buckles because of the increases of bending and torsional rigidities. The central buckle basically makes the stiffening girders and cables within the triangular area covered as a relatively approximate rigid area. Hence, the central buckle can reduce the torsional displacement of the main girder. However, the increases of bending and torsional rigidities have little influence on the impact factor, which is obtained by using vehicle-bridge coupled vibration analysis. This means that the central buckle has little effect on the comfort indices. In addition, it is found that the central buckle can enhance the bridge deck's driving stability due to the decrease of the torsional displacements of the main girder.展开更多
The Lunggar iron deposit belongs to the Bangong-Nujiang metallogenic belt and is located in central Lhasa on the Tibetan Plateau.In the Lunggar deposit,iron mineralization formed in the skarnization contact zone betwe...The Lunggar iron deposit belongs to the Bangong-Nujiang metallogenic belt and is located in central Lhasa on the Tibetan Plateau.In the Lunggar deposit,iron mineralization formed in the skarnization contact zone between the Early Cretaceous granodiorite and the late Permian Xiala Formation limestone.In this study,we achieved detailed zircon U-Pb-Hf isotopes and mineral chemistry for the Early Cretaceous granodiorite.Zircon U-Pb dating results indicate that the Early Cretaceous granodiorite emplaced at ca.119 Ma.Based on the trace elements in zircons and the mineral chemical composition of amphibole and biotite,the Early Cretaceous granodiorite was believed to form under condition of high temperature(>700°C),low pressure(100400 MPa),and relatively high oxygen fugacity(lgfO2)(13.6 to 13.9)and H2O content(4%8%).Zircon trace elements,Hf isotope and biotite chemistry collectively reveal that significant juvenile mantle-derived magmas contributed to the source of the granodiorite.The relatively high logfO2 and shallow magma chamber are beneficial for skarn iron mineralization,implying remarkable potential for further prospecting in the Lunggar iron deposit.展开更多
The Himalaya, a fold\|and\|thrust belt in the northern margin of the Indian continent, is characterized by thrust tectoncis (Schelling and Arita, 1991). It consists mainly of three thrust\|bounded lithotectonic units:...The Himalaya, a fold\|and\|thrust belt in the northern margin of the Indian continent, is characterized by thrust tectoncis (Schelling and Arita, 1991). It consists mainly of three thrust\|bounded lithotectonic units: from south to north the Sub\|Himalayan imbricate zone, the Lesser Himalayan thrust package (LH) and the Higher Himalayan thrust sheet (HH) with the overlying Tethys Himalayan sequence. These units are separated by a series of propagated thrusts, i.e. from south to north the Himalayan Frontal Fault (HFF), Main Boundary Thrust (MBT) and Main Central Thrust (MCT). These thrusts are splays off of an underlying mid\|crustal subhorizontal d$B;D(Jollement (Main Detachmen Trust or Main Himalayan Thrust), and were propagated southward with time. Among these thrusts the MCT is most important intracrustal thrust in considering the geological evolution of the Himalaya, and is controversial regarding its location and nature. In western and eastern Nepal the Higher Himalayan Crystalline sheet is thrust over the Lesser Himalayan rocks along the MCT. In the Kathmandu area of central Nepal also the high\|grade rocks of the HH with the overlying Tethyan sediments covers southward the Lesser Himalayan rocks, and form the Kathmandu nappe. In the north of the Kathmandu nappe the Higher Himalayan crystallines are skirted by the Main Central Thrust zone (MCT zone) which consists of green and black phyllites with sporadic garnet snow\|ball garnet and calcareous schist associated with characteristic mylonitic augen gneiss. The southern margin of the nappe is bounded by the Mahabharat Thrust (MT: Stoecklin, 1990) with a narrow zone of the LH which is cut by the MBT. But the relationship of the MCT in the north and the MT in the south is disputable and important (Arita et al., 1997: Rai et al., 1998: Upreti and Le Fort, 1999), and in the margin of the Kathmandu nappe the MCT zone has not been confirmed.展开更多
As part of the mosaic of micro-continents within the Central Asian Orogenic Belt(CAOB), the Xing’anAirgin Sum Block(XAB) features increasingly-recognized Meso-Neoproterozoic geological records. However, the origin, t...As part of the mosaic of micro-continents within the Central Asian Orogenic Belt(CAOB), the Xing’anAirgin Sum Block(XAB) features increasingly-recognized Meso-Neoproterozoic geological records. However, the origin, temporal-spatial distribution of ancient materials, and their roles in crust evolution remain to debate. This paper presents an integrated study of zircon U-Pb ages and Hf-O isotopes for Mesoproterozoic and Paleozoic granites from the Erenhot region of central Inner Mongolia, along eastern CAOB. The intrusion of 1450 Ma syenogranite denotes that the Precambrian basement of XAB extends from Sonid Zuoqi westward to Erenhot. The 384 and 281 Ma monzogranites containing Mesoproterozoic xenocrystic zircons possess Proterozoic-dominant two-stage Hf model ages, further suggesting the wide existence of Proterozoic crust beneath western XAB. Cyclic Proterozoic crustal growth and reworking seem to show close linkages with the orogenesis during relevant supercontinent cycles. 1450-1360 Ma juvenile crustal growth at Erenhot and synchronous ancient crust reworking at Sonid Zuoqi and Abagaqi were likely resulted from retreating subduction involved in Columbia breakup, while 1.2-1.0 Ga reworking and 0.9-0.7 Ga growth events within the Erenhot basement might respond to assembly and breakup of Rodinia, respectively. Besides, our work confirms that reworking of Neoproterozoic crust played important roles during Paleozoic multi-stage accretion of CAOB.展开更多
Two-factor analysis of variance and redundancy analysis were used to analyze the characte-ristics of soil organic carbon total nitrogen storage in garden land,forestland,grassland,farmland,and bare land in the Dachunh...Two-factor analysis of variance and redundancy analysis were used to analyze the characte-ristics of soil organic carbon total nitrogen storage in garden land,forestland,grassland,farmland,and bare land in the Dachunhe watershed of Jinning District,Kunming City,Yunnan Province,China.The effects of the soil organic carbon,total nitrogen stratification ratio,soil physical and chemical factors on the storage characteristics of organic carbon and total nitrogen of different land-use types were analyzed.The results show that the rates of carbon and nitrogen stratification in soil from 0-20 cm and 40-60 cm of the same land-use types differed are statistically significant(P<0.05).The organic carbon and total nitrogen stratification ratio SR1 of garden land soil are 38.5%and 25.3%,respectively,which are higher than SR^(2).The soil organic carbon and total nitrogen stratification ratio SR^(2) of different land-use types are greater than SR1.There are statistically significant differences in the SR^(2) soil organic carbon and total nitrogen stratification ratios(P<0.05).Soil organic carbon and total nitrogen storage of diffe-rent land-use types gradually decrease with increasing soil depth,with the maximum soil organic carbon and total nitrogen storage in the 0-20 cm soil layer.Soil organic carbon and total nitrogen sto-rage at the same soil depth are significantly different(P<0.05).Soil organic carbon and total nitrogen storage in the garden land are greater than those in the other land-use types.Soil organic carbon and total nitrogen storage in 0-20 cm garden land are 4.96 and 3.19 times than those in bare land,respectively;soil organic carbon and total nitrogen storage are explained by 93.66%and 1.53%in redundancy analysis RDA1 and RDA2,respectively.All physicochemical factors except Available Phosphorus and pH are statistically significance with carbon and nitrogen storage(P<0.05).Soil cationic exchange capacity,Available Phosphorus,C/N ratio,and Moisture Content are positively correlated with organic carbon and total nitrogen storage.In contrast,soil Bulk Density is negatively correlated with organic carbon storage and total nitrogen storage.Available Phosphorus,C/N ratio,and Moisture Content are the main factors promoting soil organic carbon and total nitrogen accumulation.展开更多
基金Project(2011B061200043)supported by the Guangdong Provincial Department of Science and Technology,China
文摘Energy performance assessment on central air-conditioning system is essential to optimize operating, reduce operating costs, improve indoor environmental quality, and determine whether the retrofitting of the equipment is necessary. But it is difficult to evaluate it reasonably and comprehensively due to its complexity. A "holistic" approach was discussed to evaluate the energy performance of central air-conditioning system for an extra-large commercial building in a subtropical city. All procedures were described in detail, including field investigation method, field measurement instruments, data processing and data analyzing. The main factors affecting energy consumption of air-conditioning system were analyzed and the annual cooling-energy use intensity of this building was calculated and also compared with other shopping malls and other types of buildings in Guangzhou. And COP(coefficient of performance) of chiller, water transfer factor of chilled water system and cooling water system were taken into consideration. At last, the thermal comfort and indoor air quality issues were addressed. The results show that the chilled water pumps are over-sized and the indoor environmental quality should be improved. The purpose of this work is to provide reference for energy performance assessment method for air-conditioning system.
基金Supported by Program of Science and Technology of Hunan Province(2007FJ2006)Project the Program of Science and Tech-nology of Hunan Province(2007TP4030)Hunan Provincial Natural Science Foundation of China(08JJ3093)
文摘This paper presented an entropy evaluation method for the influences of condense heat recovery system on the environment.Aiming at the damage of the condense heat to the environment,an entropy of resource loss and an emission entropy from the condense heat recovery system in the air conditioning refrigerating machine were introduced.For the evaluation of the entropies,we developed a new algorithm for the parameter identification,called the composite influence coefficient,based on the Least Squares Support Vector Machine method.By simulation,the numerical experiments shows that the Least Squares Support Vector Machine method is one of the powerful methods for the parameter identification to compute the damage entropy of the condense heat,with the largest training error being-0.025(the relative error being-3.56%),and the biggest test error being 0.015(the relative error being 2.5%).
基金Project(50838009) supported by the National Natural Science Foundation of ChinaProjects(2006BAJ02A09,2006BAJ02A13-4) supported by the National Key Technologies R & D Program of China
文摘To explore the relationship between summer office set air-conditioning temperature and energy consumption related to air conditioning use to provide human thermal comfort,a comparison experiment was conducted in three similar offices at temperatures of 24,26 and 28 ℃ respectively. A thermal comfort questionnaire survey was conducted. It is demonstrated that air-conditioner energy consumption at the set temperature of 28 ℃ is 113% and 271% lower than at 26 ℃ and 24 ℃,respectively. A linear relationship exists between air-conditioner energy consumption and the indoor and outdoor temperature difference. When comfortably dressed,over 80% of research participants accept the set temperature of 28 ℃. The regression analysis leads to a neutral temperature of 26.2 ℃ and an acceptable temperature of 28.2 ℃ for over 80% of the research participants subjects,indicating that the current 26 ℃ set temperature for offices in summer,required by Chinese General Office of the State Council,can be increased to 28 ℃. Moreover,analysis of predicted mean vote(PMV) index shows that a set temperature of 27 ℃,not 26 ℃,is sufficiently comfortable for office staff wearing long-sleeve shirts,long pants and leather shoes.
文摘Two building factors-a longer thermal lag of more than one hour for building envelops and a lag of indoor radiation to convert into cooling load-have impact on the instantaneous heat input and instantaneous cooling load.So the two factors should be taken into account when selecting the weather parameters for air-conditioning system design.This paper developed a new statistic method for the rational selection of coincident solar irradiance,dry-bulb and wet-bulb temperatures.The method was applied to historic weather records of 25 years in Hong Kong to generate coincident design weather data.And the results show that traditional design solar irradiance,dry-bulb and wet-bulb temperatures may be significantly overestimated in many conditions,and the design weather data for the three different constructions is not kept constant.
基金Supported by the National Natural Science Foundation of China(50878177)the Rearch Fund for the Doctoral Program of Higher Education
文摘In order to investigate the bacteria and fungi aerosol characteristic distribution in HVAC-system and its components at Shaanxi History Museum.Measurements were performed to probe the bacteria and fungi aerosol in HVAC systems,located at Xi'an city,China.The results showed that there was fungi growth inside the ventilation ducts,fungi contamination was worse than bacteria,and both of them were distributed into occupied space with the air supply ducts.The dominating genera of fungi was found to be Penicillium spp.and Aspergillus spp.,which was respectively 46.1% and 20.7% in settling fungi,and the dominating genera of fungi in dust were Cladosporium spp.and Penicillium spp.,which was 41.8% and 30.1% respectively.It suggests that available measures to improve and control the performance of HVAC-systems such as the maintenance,management and cleaning should be taken to prevent this pollution and to develop strategies to keep this pollution away.
基金National Natural Science Foundation of China (40074010) and Natural Science Foundation of Gansu Province (ZS981-A25-011)
文摘The 3-D velocity tomography image of the central-eastern part of Qilianshan is obtained by the joint inversion of 3-D velocity structure and focal parameters based on the S-P data of micro-earthquakes recorded by the digital seismic network set up for a Sino-French cooperation program since 1996. The inversed velocity structure does primarily reflect some important features of the deep structure in the region and provide the scientific background for the further study of active tectonic structure and the calculation of earthquake parameters.
基金the National Natural Science Foundation of China (No. 51605354)the Fundamental Research Funds for the Central Universities (WUT: 2015IVA021)+1 种基金the Innovative Research Team Development Program of Ministry of Education of China (No. IRT13087)the High-end Talent Leading Program of Hubei Province (No. 201286)
文摘The aim of this work is to develop a three-dimensional model of deep groove ball bearing to investigate the loaded stresses and central displacements of bearing rings. The equivalent stresses and central displacements of bearing rings are obtained based on the simulated analysis. Moreover, several parameters, such as load magnitude, raceway groove curvature radius(RGCR), thicknesses of outer and inner rings, are varied to investigate their effects on the equivalent stresses and central displacements of bearing rings. Research results provide useful guidelines for determining the design parameters.
基金Supported by Multi-Discipline Scientific Rearch Foundation of Harbin Institute of Technology(HIT MD2003.1)Postdoctoral Scientific Rearch Foundation of Heilongjiang Provine(LBH-Q06066)
文摘This paper presented a preliminary research on the central solar heating system with seasonal storage(CSHSSS)used in cold climate in China.A mathematical model of the solar energy seasonal storage water tank used in the central solar heating system was firstly developed based on energy conservation.This was followed by the simulation of the CSHSSS used in a two-floor villa in Harbin,and analysis of the impacts on storage water temperature of tank volume,solar collector area,tank burial depth,insulation thickness around the tank,etc.The results show there is a relatively economical tank volume to optimize the system efficiency,which decreases with increasing tank volume at the constant collector area,and increases with increasing collector area at the constant tank volume.Furthermore,the insulation thickness has obvious effect on avoiding heat loss,while the tank burial depth doesn't.In addition,the relationship between the solar collector efficiency and storage water temperature is also obtained,it decreases quickly with increasing storing water temperature,and then increases slowly after starting space heating system.These may be helpful for relevant design and optimization in cold climates in China and all over the world.
文摘The Alpine zone of Central Pamir is elongated in sublatitudinal direction between the Hercynians of Northern Pamir and the Cimmerians of Southern Pamir south of the Vanch\|Akbaital thrust. Its western continuation is overthrusted by the Herat fault and its eastern continuation is cut by the Karakoram strike\|slip fault.. The Central Pamir is a mainly S\|vergent (at the southern part N\|vergent) Alpine nappe stack then folding in antiform. It comprises deposits from Vendian to Neogene which have a thickness of 10km. Paleozoic and Mesozoic tectonic activity was poorly displaied in its limits. Rifting took place in Early and probably Upper Paleozoic. Pre\|Upper Cretaceous unconformity is known only in southern (autochthonous) part of the Zone as a result of closing of Bangong\|Nu Jiang ocean. In northern (allochthonous) part of the zone the sequence of Mesozoic and Paleogene rocks has no unconformities. Alpine endogenous processes were developed very intensively. They implied nappes and imbricate structures, linear folding, different igneous activity, zonal metamorphism. Slices of pyroxenites and gabbroids occured. Calc\|alkaline lavas and tuffs constitutes the major part of Paleocene to Miocene sequence (andesites\|ryolites\|in Paleogene, alkaline basalts in Oligocene—Miocene). Oligocene—Miocene zonal metamorphic belt of the intermediate type of high pressure including series of granitegneiss domes can be traced along the Central Pamir. Cores of domes include migmatites and remobilized bodies of the Early Paleozoic gneissic granites. The decompression took place at a later stage and rocks were overprinted by the andalusite\|sillimanite type metamorphism.. Syenite and leucogranite bodies, pegmatite and aplite veins were emplaced.
文摘The Altyn Tagh fault (ATF) extending in NEE—SWW direction lying at the northwestern boundary of Qinghai—Tibet plateau is the largest strike\|slip fault in Central Asia. On the basis of recent geologic mapping and detailed study of lithotectonic characteristics for the paleotectonic units at the two sides of the Altyn Tagh Fault ( Altun Mt. to west and the Qilian Mt. to east ) we propose that the paleotectonic units in the Altun Mt. can be correlated with those in the Qilian Mt. assuming 400km left\|lateral displacement for the Altyn Tagh fault. Natural seismic data across the Altun Mt. indicate that the Altyn Tagh fault is a lithospheric shear fault and the lithospheric shearing is probably related to southward intracontinental oblique subduction of the Tarim terrane beneath the Altun Mt.1\ Comparison of the major paleotectonic units at the two sides of the Altyn Tagh fault\;(1) The Alxa\|Dunhuang Massif:The Alxa massif lying at the southern margin of the Sino\|Korean craton consists mainly of an Early Proterozoic basement including high\|grade and middle\|grade metamorphic rocks, which were intruded by granite at 1719Ma. The Paleozoic passive margin sediments is well developed. In the Altun Mt., the Early Proterozoic and late Archean basement of the Duhuang massif includes high\|grade and middle\|grade metamorphic rocks dating 2789Ma (Sm\|Nd method) and 2405Ma (U\|Pb method).
基金Project(2015CB057701)supported by the National Basic Research Program of ChinaProjects(51308071,51378081)supported by the National Natural Science Foundation of China+2 种基金Project(3JJ4057)supported by the Natural Science Foundation of Hunan Province,ChinaProject(12K076)supported by the Open Fund of Innovation Platform in Hunan Provincial Universities,ChinaProject(2015319825120)supported by the Traffic Department of Appliced Basic Research,China
文摘The central buckle, which is often used in a suspension bridge, can improve bridges' performance in the actual operation condition. The influence of the central buckle on natural vibration characteristics and bridge-deck driving comfort of a long-span suspension bridge is studied by using a case study of Siduhe Suspension Bridge in China. Based on the finite element software ANSYS and independently complied program, the influence of the central buckle on the structure force-applied characteristics of a long-span suspension bridge has been explored. The results show that the huge increases of natural frequencies can result in the presence of central buckles because of the increases of bending and torsional rigidities. The central buckle basically makes the stiffening girders and cables within the triangular area covered as a relatively approximate rigid area. Hence, the central buckle can reduce the torsional displacement of the main girder. However, the increases of bending and torsional rigidities have little influence on the impact factor, which is obtained by using vehicle-bridge coupled vibration analysis. This means that the central buckle has little effect on the comfort indices. In addition, it is found that the central buckle can enhance the bridge deck's driving stability due to the decrease of the torsional displacements of the main girder.
基金Project(2018YSJS14)supported by the Open Research Fund Program of Key Laboratory of Metallogenic Prediction of Nonferrous Metals and Geological Environment Monitoring(Central South University),Ministry of Education,China
文摘The Lunggar iron deposit belongs to the Bangong-Nujiang metallogenic belt and is located in central Lhasa on the Tibetan Plateau.In the Lunggar deposit,iron mineralization formed in the skarnization contact zone between the Early Cretaceous granodiorite and the late Permian Xiala Formation limestone.In this study,we achieved detailed zircon U-Pb-Hf isotopes and mineral chemistry for the Early Cretaceous granodiorite.Zircon U-Pb dating results indicate that the Early Cretaceous granodiorite emplaced at ca.119 Ma.Based on the trace elements in zircons and the mineral chemical composition of amphibole and biotite,the Early Cretaceous granodiorite was believed to form under condition of high temperature(>700°C),low pressure(100400 MPa),and relatively high oxygen fugacity(lgfO2)(13.6 to 13.9)and H2O content(4%8%).Zircon trace elements,Hf isotope and biotite chemistry collectively reveal that significant juvenile mantle-derived magmas contributed to the source of the granodiorite.The relatively high logfO2 and shallow magma chamber are beneficial for skarn iron mineralization,implying remarkable potential for further prospecting in the Lunggar iron deposit.
文摘The Himalaya, a fold\|and\|thrust belt in the northern margin of the Indian continent, is characterized by thrust tectoncis (Schelling and Arita, 1991). It consists mainly of three thrust\|bounded lithotectonic units: from south to north the Sub\|Himalayan imbricate zone, the Lesser Himalayan thrust package (LH) and the Higher Himalayan thrust sheet (HH) with the overlying Tethys Himalayan sequence. These units are separated by a series of propagated thrusts, i.e. from south to north the Himalayan Frontal Fault (HFF), Main Boundary Thrust (MBT) and Main Central Thrust (MCT). These thrusts are splays off of an underlying mid\|crustal subhorizontal d$B;D(Jollement (Main Detachmen Trust or Main Himalayan Thrust), and were propagated southward with time. Among these thrusts the MCT is most important intracrustal thrust in considering the geological evolution of the Himalaya, and is controversial regarding its location and nature. In western and eastern Nepal the Higher Himalayan Crystalline sheet is thrust over the Lesser Himalayan rocks along the MCT. In the Kathmandu area of central Nepal also the high\|grade rocks of the HH with the overlying Tethyan sediments covers southward the Lesser Himalayan rocks, and form the Kathmandu nappe. In the north of the Kathmandu nappe the Higher Himalayan crystallines are skirted by the Main Central Thrust zone (MCT zone) which consists of green and black phyllites with sporadic garnet snow\|ball garnet and calcareous schist associated with characteristic mylonitic augen gneiss. The southern margin of the nappe is bounded by the Mahabharat Thrust (MT: Stoecklin, 1990) with a narrow zone of the LH which is cut by the MBT. But the relationship of the MCT in the north and the MT in the south is disputable and important (Arita et al., 1997: Rai et al., 1998: Upreti and Le Fort, 1999), and in the margin of the Kathmandu nappe the MCT zone has not been confirmed.
基金Projects(41873035,41802053) supported by the National Natural Science Foundation of ChinaProject(ZD2021015) supported by the Science and Technology Project of Hebei Education Department,China+1 种基金Project(SCRM2116) supported by the Opening Foundation of Hebei Key Laboratory of Strategic Critical Mineral Resources,ChinaProject(202045004) supported by the Scientific Research Starting Foundation of Central South University,China。
文摘As part of the mosaic of micro-continents within the Central Asian Orogenic Belt(CAOB), the Xing’anAirgin Sum Block(XAB) features increasingly-recognized Meso-Neoproterozoic geological records. However, the origin, temporal-spatial distribution of ancient materials, and their roles in crust evolution remain to debate. This paper presents an integrated study of zircon U-Pb ages and Hf-O isotopes for Mesoproterozoic and Paleozoic granites from the Erenhot region of central Inner Mongolia, along eastern CAOB. The intrusion of 1450 Ma syenogranite denotes that the Precambrian basement of XAB extends from Sonid Zuoqi westward to Erenhot. The 384 and 281 Ma monzogranites containing Mesoproterozoic xenocrystic zircons possess Proterozoic-dominant two-stage Hf model ages, further suggesting the wide existence of Proterozoic crust beneath western XAB. Cyclic Proterozoic crustal growth and reworking seem to show close linkages with the orogenesis during relevant supercontinent cycles. 1450-1360 Ma juvenile crustal growth at Erenhot and synchronous ancient crust reworking at Sonid Zuoqi and Abagaqi were likely resulted from retreating subduction involved in Columbia breakup, while 1.2-1.0 Ga reworking and 0.9-0.7 Ga growth events within the Erenhot basement might respond to assembly and breakup of Rodinia, respectively. Besides, our work confirms that reworking of Neoproterozoic crust played important roles during Paleozoic multi-stage accretion of CAOB.
基金Natural Science Foundation of China(51979134,51779113)Yunnan Provincial Education Department Scientific Research Fund Project(2021J0164)+4 种基金Open Fund Project of Yunnan Provincial Key Laboratory of Highland Wetland Protection and Restoration and Ecological Services(202105AG070002)Provincial Innovation Team on Environmental Pollution and Food Safety and Human Health,Southwest Forestry University(2005AE160017)A Study of Terrestrial Animal Habitats in Li Ziping National Nature Reserve,Sichuan Province(2021ZD0125)The Construction Project of Key Disciplines with Advantages and Characteristics(Ecology)in Yunnan UniversitiesResearch Project of Key Laboratory of Soil Erosion and Control in Yunnan University。
文摘Two-factor analysis of variance and redundancy analysis were used to analyze the characte-ristics of soil organic carbon total nitrogen storage in garden land,forestland,grassland,farmland,and bare land in the Dachunhe watershed of Jinning District,Kunming City,Yunnan Province,China.The effects of the soil organic carbon,total nitrogen stratification ratio,soil physical and chemical factors on the storage characteristics of organic carbon and total nitrogen of different land-use types were analyzed.The results show that the rates of carbon and nitrogen stratification in soil from 0-20 cm and 40-60 cm of the same land-use types differed are statistically significant(P<0.05).The organic carbon and total nitrogen stratification ratio SR1 of garden land soil are 38.5%and 25.3%,respectively,which are higher than SR^(2).The soil organic carbon and total nitrogen stratification ratio SR^(2) of different land-use types are greater than SR1.There are statistically significant differences in the SR^(2) soil organic carbon and total nitrogen stratification ratios(P<0.05).Soil organic carbon and total nitrogen storage of diffe-rent land-use types gradually decrease with increasing soil depth,with the maximum soil organic carbon and total nitrogen storage in the 0-20 cm soil layer.Soil organic carbon and total nitrogen sto-rage at the same soil depth are significantly different(P<0.05).Soil organic carbon and total nitrogen storage in the garden land are greater than those in the other land-use types.Soil organic carbon and total nitrogen storage in 0-20 cm garden land are 4.96 and 3.19 times than those in bare land,respectively;soil organic carbon and total nitrogen storage are explained by 93.66%and 1.53%in redundancy analysis RDA1 and RDA2,respectively.All physicochemical factors except Available Phosphorus and pH are statistically significance with carbon and nitrogen storage(P<0.05).Soil cationic exchange capacity,Available Phosphorus,C/N ratio,and Moisture Content are positively correlated with organic carbon and total nitrogen storage.In contrast,soil Bulk Density is negatively correlated with organic carbon storage and total nitrogen storage.Available Phosphorus,C/N ratio,and Moisture Content are the main factors promoting soil organic carbon and total nitrogen accumulation.
