Bay-site carboxyl functionalized perylene diimide derivative 1,7-COOH-PDI-C_(12)(PDI-COOH)was synthesized and distinct enhanced fluorescence was observed through combining with calcium ion(Ca^(2+))in THF/H_(2)O soluti...Bay-site carboxyl functionalized perylene diimide derivative 1,7-COOH-PDI-C_(12)(PDI-COOH)was synthesized and distinct enhanced fluorescence was observed through combining with calcium ion(Ca^(2+))in THF/H_(2)O solution.The assembly and fluorescence behavior of PDI-COOH/Ca^(2+)were studied in detail by changing hydration state with different concentrations.Based on the differences in assembly morphology and stoichiometric ratios of PDICOOH/Ca^(2+),we proposed the fluorescence emission mechanism of PDI-COOH/Ca^(2+)in THF/H_(2)O and THF,respectively.This work reveals a novel strategy of aggregated state fluorescence enhancement and reminds us of the important role of water in molecular fluorescence emission and assembly.展开更多
Calcium ions(Ca^(2+))and manganese ions(Mn^(2+))are essential for sustaining life activities and are key monitoring indicators in drinking water.Developing highly sensitive,selective,and portable detection methods for...Calcium ions(Ca^(2+))and manganese ions(Mn^(2+))are essential for sustaining life activities and are key monitoring indicators in drinking water.Developing highly sensitive,selective,and portable detection methods for Ca^(2+)and Mn^(2+)is significant for water quality monitoring and human health.In this paper,blue fluorescent Ti3C2 MXene-based quantum dots(MQDs,λ_(em)=445 nm)are prepared using Ti_(3)C_(2)MXene as the precursor.Through the chelation effect of ethylene diamine tetraacetic acid(EDTA),a blue and red dual-emission fluorescent probe,MQDs-EDTA-Eu^(3+)-DPA,was constructed.Herein,dipicolinic acid(DPA)acts as an absorbing ligand and significantly enhances the red fluorescence of europium ions(Eu^(3+))at 616 nm through the“antenna effect”.The blue fluorescence of MQDs serves as an internal reference signal.High concentrations of Ca^(2+)can quench the red fluorescence of Eu^(3+)-DPA;Mn^(2+)can be excited to emit purple fluorescence at 380 nm after coordinating with DPA,red fluorescence of Eu^(3+)-DPA serves as the internal reference signal.Based on the above two fluorescence intensity changes,ratiometric fluorescence detection methods for Ca^(2+)and Mn^(2+)are established.The fluorescence intensity ratio(IF_(616)/IF_(445))exhibits a linear relationship with Ca^(2+)in the range of 35-120μmol/L,with a detection limit of 5.98μmol/L.The fluorescence intensity ratio(IF_(380)/IF_(616))shows good linearity with Mn^(2+)in the range of 0-14μmol/L,with a detection limit of 28.6 nmol/L.This method was successfully applied to the quantitative analysis of Ca^(2+)and Mn^(2+)in commercially available mineral water(Nongfu Spring,Ganten,and Evergrande),with recovery rates of 80.6%-117%and relative standard deviations(RSD)of 0.76%-4.6%.Additionally,by preparing MQD-based fluorescent test strips,visual detections of Ca^(2+)and Mn^(2+)are achieved.This work demonstrates the application potential of MQDs in the field of visual fluorescence sensing of ions in water quality.展开更多
Stemming from the high costs and environmental pollution associated with the use of sodium sulfide in the separation and extraction processes of molybdenum bismuth ore,calcium hypochlorite was introduced as a substitu...Stemming from the high costs and environmental pollution associated with the use of sodium sulfide in the separation and extraction processes of molybdenum bismuth ore,calcium hypochlorite was introduced as a substitute to facilitate the cleaner production of low-grade molybdenum bismuth ore in this study.The effects of calcium hypochlorite on molybdenite,bismuthinite,and pyrite were investigated through micro-flotation,flotation kinetics,batch flotation,Fourier transform infrared(FTIR)spectra,scanning electron microscopy energy dispersion spectra(SEM-EDS),and inductively coupled plasma-optical emission spectra(ICP-OES).The flotation tests results showed that calcium hypochlorite could selectively depress bismuthinite and pyrite.In comparison to sodium sulfide,calcium hypochlorite not only improved the flotation indicators for molybdenum and bismuth concentrates but also reduced the dosage of flotation reagents.Moreover,the chemical oxygen demand(COD)of tailings wastewater significantly decreased when using calcium hypochlorite as a depressant.Mechanism research revealed that the use of calcium hypochlorite as a depressant led to BiOCl precipitation on bismuthinite,which hindered the attachment of the collector.In summary,calcium hypochlorite serves as a more efficient and environmentally friendly depressant compared to sodium sulfide in the industrial production processes of low-grade molybdenum bismuth ore.展开更多
Ferrite-rich calcium sulfoaluminate(FCSA)cement is often used in special projects such as marine engineering due to its excellent resistance of seawater attack although the cost is a little high.Ground granulated blas...Ferrite-rich calcium sulfoaluminate(FCSA)cement is often used in special projects such as marine engineering due to its excellent resistance of seawater attack although the cost is a little high.Ground granulated blast furnace slag(GGBS),a byproduct of industrial production,is used as a mineral admixture to reduce concrete costs and provide excellent performance.This study aimed to investigate the impact of GGBS on the hydration properties of FCSA cement in seawater.Tests were conducted on heat of hydration,compressive strength,mass change,and pH value of pore solution of FCSA cement paste with a water-to-binder ratio of 0.45.X-ray diffraction(XRD)analysis and thermogravimetric analysis were used to determine the hydration products,while mercury intrusion porosimetry(MIP)was used to measure pore structure.The results indicated that the FCSA cement hydration showed a concentrated heat release at early age.The compressive strength of specimens consistently increased over time,where seawater curing enhanced the compressive strength of control samples.The pH value of pore solution decreased to 10.7−10.9 at 90 d when cured in seawater.The primary hydration products of FCSA cement included ettringite,iron hydroxide gel(FH_(3)),and aluminum hydroxide gel(AH_(3)).Moreover,when cured in seawater,Friedel’s salt was formed,which enhanced the compressive strength of the specimen and increased its coefficient of corrosion.Seawater curing gradually increased sample mass,and GGBS refined pore structure while reducing harmful pore proportions.These results suggest that while GGBS can refine pore structure and improve certain aspects of performance,its inclusion may also reduce compressive strength,highlighting the need for a balanced approach in its use for marine applications.展开更多
【Objectives】Rose(Rosa hybrida L.)is a beautiful and widely cultivated flowering plant around the world whose quality is of great commercial importance.The objective of this study was to investigate the impact of fol...【Objectives】Rose(Rosa hybrida L.)is a beautiful and widely cultivated flowering plant around the world whose quality is of great commercial importance.The objective of this study was to investigate the impact of foliar application of calcium nitrate on the quality and postharvest life of two rose varieties(cvs.Samurai,and Jumilia)in a soilless culture system.【Methods】The research used a hydroponic culture method,the roses plants were grown in Hoagland nutrient solution containing 50%less Ca for a total span of 4 months.One month was dedicated to plant acclimatization,and 3 months for spray treatment.Two rose varieties(Rosa hybrida L.),cvs.Samurai and Jumilia plants were used as test materials and planted in pots containing 100%perlite(3-5 mm).After one month of culture,160 mg/kg CaNO3 solution was sprayed,and each treatment corresponded to the first,second,and third harvests,respectively.The plant and flower growth indicators and flower vase life were investigated after each harvesting immediately.【Results】A positive impact of foliar-applied Ca on stem characteristics,pedicel dimensions,corolla size,flower attributes,and vase life was found.Furthermore,a general trend was observed,wherein an increase in the number of harvesting stages led to improved traits.Notably,Jumilia rose consistently exhibited lower values for all studied traits,except for flower vase life,in comparison to the Samurai rose.While there were no significant differences in length values between Samurai and Jumilia roses due to calcium foliar application across the three harvesting stages.Duncan’s grouping revealed a specific effect on Jumilia roses during the third harvest stage.Calcium fertilizer significantly increased photosynthesis rates of of rose leaves in the calcium treatments compared with the control treatment.【Conclusions】Foliar spraying of calcium nitrate is an effective measure to promote the growth of roses and improve the yield,quality and bottle life of fresh cut flowers.展开更多
A safe,economical treatment of hazardous chromium-bearing vanadate residue(CVR)will significantly benefit the clean production of chromate-bearing salts.This study investigated recovery of sodium vanadate and sodium c...A safe,economical treatment of hazardous chromium-bearing vanadate residue(CVR)will significantly benefit the clean production of chromate-bearing salts.This study investigated recovery of sodium vanadate and sodium chromate from CVR in sodium bicarbonate solution.Results indicate that the stability of calcium vanadate and calcium chromate depends on pH and[HCO3?].CaV2O6?4H2O transforms into CaV2O6?4H2O,CaV2O6?2H2O,CaV2O6,Ca2V2O7?2H2O,and Ca5(VO4)3(OH)when pH increases from 7.51 to 12.32.Increasing pH and reducing CVR dosage improve the vanadate extraction rate,and high V2O5 and Na2Cr2O7?2H2O extraction rates are achieved in dilute NaHCO3 solution.Moreover,addition of NaOH positively contributes to the recovery of vanadate and chromate from CVR.Over 95%V2O5 and Na2Cr2O7?2H2O in CVR can be extracted from 60 g/L NaHCO3 and 30 g/L NaOH solutions at 90°C for 2 h.In order to reduce the hazardous residue containing chromate after recovery of CVR,calcium circulation is presented.Results show that more than 60%lime can be saved with fresh residue addition to remove vanadate from sodium chromate solution due to the active CaCO3.Moreover,no lime is required in removal of vanadate when the roasting residue is added.Therefore,a novel process is developed for utilization of CVR.展开更多
The increasing demand for iron ore in the world causes the continuous exhaustion of magnetite resources.The utilization of high-phosphorus iron ore becomes the focus.With calcium carbonate(CaCO_(3)),calcium chloride(C...The increasing demand for iron ore in the world causes the continuous exhaustion of magnetite resources.The utilization of high-phosphorus iron ore becomes the focus.With calcium carbonate(CaCO_(3)),calcium chloride(CaCl_(2)),or calcium sulfate(CaSO_(4))as additive,the process of direct reduction and phosphorus removal of high-phosphorus iron ore(phosphorus mainly occurred in the form of Fe_(3)PO_(7) and apatite)was studied by using the technique of direct reductiongrinding-magnetic separation.The mechanism of calcium compounds to reduce phosphorus was investigated from thermodynamics,iron metallization degree,mineral composition and microstructure.Results showed that Fe_(3)PO_(7) was reduced to elemental phosphorus without calcium compounds.The iron-phosphorus alloy was generated by react of metallic iron and phosphorus,resulting in high phosphorus in reduced iron products.CaCO_(3) promoted the reduction of hematite and magnetite,and improved iron metallization degree,but inhibited the growth of metallic iron particles.CaCl_(2) strengthened the growth of iron particles.However,the recovery of iron was reduced due to the formation of volatile FeCl_(2).CaSO_(4) promoted the growth of iron particles,but the recovery of iron was drastically reduced due to the formation of non-magnetic FeS.CaCO_(3),CaCl_(2) or CaSO_(4) could react with Fe_(3)PO_(7) to form calcium phosphate(Ca_(3)(PO_(4))_(2)).With the addition of CaCO_(3),Ca_(3)(PO_(4))_(2) was closely combined with fine iron particles.It is difficult to separate iron and phosphorus by grinding and magnetic separation,resulting in the reduced iron product phosphorus content of 0.18%.In the presence of CaCl_(2) or CaSO_(4),the boundary between the generated Ca_(3)(PO_(4))_(2) and the metallic iron particles was obvious.Phosphorus was removed by grinding and magnetic separation,and the phosphorus content in the reduced iron product was less than 0.10%.展开更多
Calcium carbonate,which is widely employed as a filler added into the polymer matrix,has large numbers of applications owing to the excellent properties such as low cost,non-toxicity,high natural reserves and biocompa...Calcium carbonate,which is widely employed as a filler added into the polymer matrix,has large numbers of applications owing to the excellent properties such as low cost,non-toxicity,high natural reserves and biocompatibility.Nevertheless,in order to obtain the good filling effect,calcium carbonate needs to be surface modified by organic molecules so as to enhance the dispersion and compatibility within the composites.This review paper systematically introduces the theory,methods,and applications progress of calcium carbonate with surface modification.Additionally,the key factors that affect the properties of the composites as well as the current difficulties and challenges are highlighted.The current research progress and potential application prospects of calcium carbonate in the fields of plastics,rubber,paper,medicine and environmental protection are discussed as well.Generally,this review can provide valuable reference for the modification and comprehensive utilization of calcium carbonate.展开更多
The influences of pH value, electrolyte temperature and loading time on depositing calcium phosphate coating on pure titanium substrate by electrodeposition process were investigated. The process was carried out with ...The influences of pH value, electrolyte temperature and loading time on depositing calcium phosphate coating on pure titanium substrate by electrodeposition process were investigated. The process was carried out with an electrochemical work-station supplying a direct current power at potential of -0.8V （vs SCE）. The electrolyte consists of 7 mmol·L-1 CaCl2·2H2O, 3 mmol·L-1 Ca（H2PO4）2·H2O and 2.5% H2O2. NaOH and HCl solutions were used to adjust pH value. The deposited samples were characterized by X-ray diffraction and scanning electron microscope. The comparison of the deposits obtained at lower and higher pH values demonstrates that the crystallization process at the interface is favoured by high pH value. With temperature increasing, the deposited hydroxyapatite is occasionally of plate-like shape, and the width and the length of the deposited calcium phosphates at 65 ℃ are larger than those at 55 ℃. Therefore, it is confirmed that the morphology and microstructure of electrochemically deposited calcium phosphates can be regulated. Additionally, the coating formed in electrolyte with H2O2 additive is homogeneous and the evolution of H2 bubble can be eliminated.展开更多
To investigate the hydrogen permeability of calcium fluoride used for electroslag remelting （ESR） process, ＂Gas-slag- metal＂ osmosis process under argon atmosphere saturated with water vapor at 318 K was used to s...To investigate the hydrogen permeability of calcium fluoride used for electroslag remelting （ESR） process, ＂Gas-slag- metal＂ osmosis process under argon atmosphere saturated with water vapor at 318 K was used to study the hydrogen permeability of slag containing calcium fluoride. The results indicate that the conventional slag, consisting of 70% CaF2 and 30% A1203, has the lowest hydrogen permeability. A parameter EH was proposed for evaluation of the hydrogen permeability of slags containing calcium fluoride. The hydrogen permeability decreases with increasing EH to a certain extent. An appropriate choice of slag for the ESR process can be obtained. These results also suggest that the hydrogen pick-up in steel after remelting might be reduced when a slag with low hydrogen permeability is used.展开更多
The interface properties between hydrated cement paste(hcp)and aggregates largely determine the various performances of concrete.In this work,molecular dynamics simulations were employed to explore the atomistic inter...The interface properties between hydrated cement paste(hcp)and aggregates largely determine the various performances of concrete.In this work,molecular dynamics simulations were employed to explore the atomistic interaction mechanisms between the commonly used aggregate phase calcite/silica and calcium silicate hydrates(C-S-H),as well as the effect of moisture.The results suggest that the C-S-H/calcite interface is relatively strong and stable under both dry and moist conditions,which is caused by the high-strength interfacial connections formed between calcium ions from calcite and high-polarity non-bridging oxygen atoms from the C-S-H surface.Silica can be also adsorbed on the dry C-S-H surface by the H-bonds;however,the presence of water molecules on the interface may substantially decrease the affinities.Furthermore,the dynamics interface separation tests of C-S-H/aggregates were also implemented by molecular dynamics.The shape of the calculated stress-separation distance curves obeys the quasi-static cohesive law obtained experimentally.The moisture conditions and strain rates were found to affect the separation process of C-S-H/silica.A wetter interface and smaller loading rate may lead to a lower adhesion strength.The mechanisms interpreted here may shed new lights on the understandings of hcp/aggregate interactions at a nano-length scale and creation of high performance cementitious materials.展开更多
Proper utilization of the FeSO4·7H2O waste slag generated from TiO2 industry is an urgent need, and Fe3O4 particles are currently being widely used in the wastewater flocculation field. In this work, magnetite wa...Proper utilization of the FeSO4·7H2O waste slag generated from TiO2 industry is an urgent need, and Fe3O4 particles are currently being widely used in the wastewater flocculation field. In this work, magnetite was recovered from ferrous sulphate by a novel co-precipitation method with calcium hydroxide as the precipitant. Under optimum conditions, the obtained spherical magnetite particles are well crystallized with a Fe304 purity of 88.78%, but apt to aggregate with a median particle size of 1.83 μm. Magnetic measurement reveals the obtained Fe304 particles are soft magnetic with a saturation magnetization of 81.73 A-m2/kg. In addition, a highly crystallized gypsum co-product is obtained in blocky or irregular shape. Predictably, this study would provide additional opportunities for future application of low-cost Fe3O4 particles in water treatment field.展开更多
It is generally known that the large formation amount of calcium ferrite is favorable for the iron ore sintering. The effects of sintering temperature and O2 content of inlet gas on the calcium ferrite formation chara...It is generally known that the large formation amount of calcium ferrite is favorable for the iron ore sintering. The effects of sintering temperature and O2 content of inlet gas on the calcium ferrite formation characteristic of typical iron ores, including hematite, limonite, specularite and magnetite, were investigated. And the effect of O2 content on the microstructure of the roasted briquettes was also studied in detail. The results show the amount of calcium ferrite initially increases then decreases with the increase of the sintering temperature. The temperature of maximum calcium ferrite generation amount is determined as follows： for hematite and limonite it is 1275 ~C, whereas for specularite and magnetite, 1250℃. The maximum contents of calcium ferrite for hematite, limonite, specularite and magnetite under the optimal sintering temperature are 73%, 82%, 67% and 63%, respectively. Increasing O2 content of the airflow is advantageous to the formation of calcium ferrite. Relatively, the effect of O2 content on the calcium ferrite formation of magnetite is the most pronounced, while O2 content of inlet gas has little effect on the calcium ferrite formation of limonite.展开更多
The crystal structure,formation kinetics and micro-morphology of CaO·SiO2 during high-temperature sintering process were studied in low-calcium system by XRD,FT-IR,Raman and SEM-EDS methods.When the molar ratio o...The crystal structure,formation kinetics and micro-morphology of CaO·SiO2 during high-temperature sintering process were studied in low-calcium system by XRD,FT-IR,Raman and SEM-EDS methods.When the molar ratio of CaCO3 to SiO2 is 1.0,β-2CaO·SiO2 forms firstly during the heating process,and then CaO·SiO2 is generated by the transformation reaction of pre-formed 2CaO·SiO2 with SiO2.3CaO·SiO2 and 3CaO·2SiO2 do not form either in the heating or sintering process.Rising the sintering temperature and prolonging the holding time promote the phase transition of 2CaO·SiO2 to CaO·SiO2,resulting in the sintered products a small blue shift and broadening in Raman spectra.The content of CS can reach 97.4%when sintered at 1400℃ for 1 h.The formation kinetics of CaO·SiO2 follows the second-order chemical reaction model,and the corresponding apparent activation energy and pre-exponential factor are 505.82 kJ/mol and 2.16×10^14 s^−1 respectively.展开更多
Accumulation characteristics and antioxidant enzyme activities in rice seedlings from a high-cadmium(Cd)-accumulating cultivar Tyou705(705)and low-Cd-accumulating cultivar Xiangzao 24(X24)were studied,based on hydropo...Accumulation characteristics and antioxidant enzyme activities in rice seedlings from a high-cadmium(Cd)-accumulating cultivar Tyou705(705)and low-Cd-accumulating cultivar Xiangzao 24(X24)were studied,based on hydroponic experiment.Three levels of calcium(Ca)(0,1.0 and 2.0 mmol?L-1)and two levels of Cd(0 and 2.7μmol·L^-1)were designed in this study.Experimental results showed that the tolerance of rice seedlings to Cd stress was significantly improved by adding 1.0 or 2.0 mmol·L^-1 Ca.Comparing with Cd control,adding 1.0 mmol·L^-1 Ca made the seedling biomass of 705 and X24 increased by 68.9%and 116.2%,respectively.Addition of 2.0 mmol·L^-1 Ca was more effective than that of 1.0 mmol·L^-1 Ca in promoting rice biomass,root tip number,total root length,and total root surface area.After addition of 2.0 mmol·L^-1 Ca and Cd contents in roots and shoots of 705 decreased by 23.5%and 35.2%,Cd in roots and shoots of X24 decreased by 22.2%and 18.7%,respectively.Addition of Ca significantly promoted the accumulation of Mg,K and Zn in shoots and roots of X24 under Cd stress environment and eliminated the inhibitory effect of Cd on the uptake of these elements.Both 1.0 and 2.0 mmol·L^-1 Ca significantly decreased the activities of superoxide dismutase(SOD)and peroxidase(POD)in rice seedlings under Cd stress.These results indicated that 1.0-2.0 mmol·L^-1 Ca could significantly reduce Cd content in rice roots and shoots,promote the uptake and accumulation of essential elements and alleviate the oxidative damage caused by Cd stress in rice seedlings.展开更多
Electrolytic manganese residue(EMR), a high volume byproduct resulting from the electrolytic manganese industry, was used as a cheap and abundant chemical source for preparing MnO2 and EMR-made calcium silicate hydrat...Electrolytic manganese residue(EMR), a high volume byproduct resulting from the electrolytic manganese industry, was used as a cheap and abundant chemical source for preparing MnO2 and EMR-made calcium silicate hydrate(EMR-CSH). The MnO2 is successfully synthesized from the metal cations extracted from EMR, which can effectively recycle the manganese in the EMR. By the combination of XRD, SEM and EDX analysis, the as-prepared MnO2 is found to exhibit a single-phase with the purity of 90.3%. Furthermore, EMR-CSH is synthesized from EMR via hydrothermal method. Based on the detailed analyses using XRD, FT-IR, FE-SEM, EDX and BET surface area measurement, the product synthesized under the optimum conditions(p H 12.0 and 100 °C) is identified to be a calcium silicate hydrate with a specific surface area of 205 m2/g incorporating the slag-derived metals(Al and Mg) in its structure. The as-synthesized material shows good adsorption properties for removal of Mn2+ and phosphate ions diluted in water, making it a promising candidate for efficient bulk wastewater treatment. This conversion process, which enables us to fabricate two different kinds of valuable materials from EMR at low cost and through convenient preparation steps, is surely beneficial from the viewpoint of the chemical and economical use of EMR.展开更多
Calcium phosphate film was prepared by electrochemical deposition technology. Subsequently, the alkaline treatment process of calcium phosphate film in 0.1 mol/L NaOH solution was monitored on real time by the piezoel...Calcium phosphate film was prepared by electrochemical deposition technology. Subsequently, the alkaline treatment process of calcium phosphate film in 0.1 mol/L NaOH solution was monitored on real time by the piezoelectric quartz crystal impedance （PQCI） technique. The variations of morphology and composition for the alkaline treatment products were characterized by scanning electron microscopy （SEM）, Fourier transform infrared （FT-IR） and X-ray diffraction （XRD）, respectively. The dynamic variations of calcium phosphate can be characterized by the change of equivalent circuit parameters. The results show that the forming process of hydroxyapatite （HA） is composed of three stages： （1） acidic calcium phosphate dissolution; （2） phase transformation; and （3） HA formation. Furthermore, the correlative kinetic equations and parameters are obtained by fitting the static capacitance （C8）-time curves.展开更多
Porous and dense TiNi alloys were successfully fabricated by powder metallurgy(P/M) method, and to further improve their surface biocompatibility, surface modification techniques including grind using silicon-carbide(...Porous and dense TiNi alloys were successfully fabricated by powder metallurgy(P/M) method, and to further improve their surface biocompatibility, surface modification techniques including grind using silicon-carbide(SiC) paper, acid etching and alkali treatment were employed to produce either irregularly rough surface or micro-porous surface roughness. X-ray diffractometry(XRD), scanning electron microscopy(SEM) and energy dispersive X-ray spectroscopy(EDX) attached to SEM were used to characterize surface structure and the Ca-P coatings. Effects of the above surface treatments on the surface morphology, apatite forming ability were systematically investigated. Results indicate that all the above surface treatments increase the apatite forming ability of TiNi alloys in varying degrees when soaked in simulated body fluid(SBF). More apatite coatings formed on TiNi samples sintered at 1050℃ and 1100℃ due to their high porosity and pure TiNi phase that is beneficial to heterogeneous nucleation. Furthermore, more uniform apatite was fabricated on the sample sintered from the mixture of Ni and Ti powders.展开更多
文摘Bay-site carboxyl functionalized perylene diimide derivative 1,7-COOH-PDI-C_(12)(PDI-COOH)was synthesized and distinct enhanced fluorescence was observed through combining with calcium ion(Ca^(2+))in THF/H_(2)O solution.The assembly and fluorescence behavior of PDI-COOH/Ca^(2+)were studied in detail by changing hydration state with different concentrations.Based on the differences in assembly morphology and stoichiometric ratios of PDICOOH/Ca^(2+),we proposed the fluorescence emission mechanism of PDI-COOH/Ca^(2+)in THF/H_(2)O and THF,respectively.This work reveals a novel strategy of aggregated state fluorescence enhancement and reminds us of the important role of water in molecular fluorescence emission and assembly.
基金The Tertiary Education Scientific Research Project of the Guangzhou Municipal Education Bureau(2024312227)Innovative and Entrepreneurial Projects of Guangzhou University Students(202411078014)+2 种基金Guangzhou University Open Sharing Fund for Instruments and Equipment(2025)National Major Scientific Research Instrument Development Project(22227804)Sub-subject of the National Key Research Project(2023YFB3210100)。
文摘Calcium ions(Ca^(2+))and manganese ions(Mn^(2+))are essential for sustaining life activities and are key monitoring indicators in drinking water.Developing highly sensitive,selective,and portable detection methods for Ca^(2+)and Mn^(2+)is significant for water quality monitoring and human health.In this paper,blue fluorescent Ti3C2 MXene-based quantum dots(MQDs,λ_(em)=445 nm)are prepared using Ti_(3)C_(2)MXene as the precursor.Through the chelation effect of ethylene diamine tetraacetic acid(EDTA),a blue and red dual-emission fluorescent probe,MQDs-EDTA-Eu^(3+)-DPA,was constructed.Herein,dipicolinic acid(DPA)acts as an absorbing ligand and significantly enhances the red fluorescence of europium ions(Eu^(3+))at 616 nm through the“antenna effect”.The blue fluorescence of MQDs serves as an internal reference signal.High concentrations of Ca^(2+)can quench the red fluorescence of Eu^(3+)-DPA;Mn^(2+)can be excited to emit purple fluorescence at 380 nm after coordinating with DPA,red fluorescence of Eu^(3+)-DPA serves as the internal reference signal.Based on the above two fluorescence intensity changes,ratiometric fluorescence detection methods for Ca^(2+)and Mn^(2+)are established.The fluorescence intensity ratio(IF_(616)/IF_(445))exhibits a linear relationship with Ca^(2+)in the range of 35-120μmol/L,with a detection limit of 5.98μmol/L.The fluorescence intensity ratio(IF_(380)/IF_(616))shows good linearity with Mn^(2+)in the range of 0-14μmol/L,with a detection limit of 28.6 nmol/L.This method was successfully applied to the quantitative analysis of Ca^(2+)and Mn^(2+)in commercially available mineral water(Nongfu Spring,Ganten,and Evergrande),with recovery rates of 80.6%-117%and relative standard deviations(RSD)of 0.76%-4.6%.Additionally,by preparing MQD-based fluorescent test strips,visual detections of Ca^(2+)and Mn^(2+)are achieved.This work demonstrates the application potential of MQDs in the field of visual fluorescence sensing of ions in water quality.
基金Projects(2022YFC2904504-4,2019YFC0408300)supported by the National Key R&D Program of ChinaProject(HB202302)supported by the Open Foundation of State Environmental Protection Key Laboratory of Mineral Metallurgical Resources Utilization and Pollution Control,China+1 种基金Project(51634009)supported by the National Natural Science Foundation of ChinaProject(B14034)supported by the National“111”Project,China。
文摘Stemming from the high costs and environmental pollution associated with the use of sodium sulfide in the separation and extraction processes of molybdenum bismuth ore,calcium hypochlorite was introduced as a substitute to facilitate the cleaner production of low-grade molybdenum bismuth ore in this study.The effects of calcium hypochlorite on molybdenite,bismuthinite,and pyrite were investigated through micro-flotation,flotation kinetics,batch flotation,Fourier transform infrared(FTIR)spectra,scanning electron microscopy energy dispersion spectra(SEM-EDS),and inductively coupled plasma-optical emission spectra(ICP-OES).The flotation tests results showed that calcium hypochlorite could selectively depress bismuthinite and pyrite.In comparison to sodium sulfide,calcium hypochlorite not only improved the flotation indicators for molybdenum and bismuth concentrates but also reduced the dosage of flotation reagents.Moreover,the chemical oxygen demand(COD)of tailings wastewater significantly decreased when using calcium hypochlorite as a depressant.Mechanism research revealed that the use of calcium hypochlorite as a depressant led to BiOCl precipitation on bismuthinite,which hindered the attachment of the collector.In summary,calcium hypochlorite serves as a more efficient and environmentally friendly depressant compared to sodium sulfide in the industrial production processes of low-grade molybdenum bismuth ore.
基金Project(2023DJC182)supported by the Department of Science and Technology of Hubei Province,ChinaProjects(51608402,51602229)supported by the National Natural Science Foundation of ChinaProject(2021-2075-38)supported by the Department of Housing and Urban-Rural Development of Hubei Province,China。
文摘Ferrite-rich calcium sulfoaluminate(FCSA)cement is often used in special projects such as marine engineering due to its excellent resistance of seawater attack although the cost is a little high.Ground granulated blast furnace slag(GGBS),a byproduct of industrial production,is used as a mineral admixture to reduce concrete costs and provide excellent performance.This study aimed to investigate the impact of GGBS on the hydration properties of FCSA cement in seawater.Tests were conducted on heat of hydration,compressive strength,mass change,and pH value of pore solution of FCSA cement paste with a water-to-binder ratio of 0.45.X-ray diffraction(XRD)analysis and thermogravimetric analysis were used to determine the hydration products,while mercury intrusion porosimetry(MIP)was used to measure pore structure.The results indicated that the FCSA cement hydration showed a concentrated heat release at early age.The compressive strength of specimens consistently increased over time,where seawater curing enhanced the compressive strength of control samples.The pH value of pore solution decreased to 10.7−10.9 at 90 d when cured in seawater.The primary hydration products of FCSA cement included ettringite,iron hydroxide gel(FH_(3)),and aluminum hydroxide gel(AH_(3)).Moreover,when cured in seawater,Friedel’s salt was formed,which enhanced the compressive strength of the specimen and increased its coefficient of corrosion.Seawater curing gradually increased sample mass,and GGBS refined pore structure while reducing harmful pore proportions.These results suggest that while GGBS can refine pore structure and improve certain aspects of performance,its inclusion may also reduce compressive strength,highlighting the need for a balanced approach in its use for marine applications.
文摘【Objectives】Rose(Rosa hybrida L.)is a beautiful and widely cultivated flowering plant around the world whose quality is of great commercial importance.The objective of this study was to investigate the impact of foliar application of calcium nitrate on the quality and postharvest life of two rose varieties(cvs.Samurai,and Jumilia)in a soilless culture system.【Methods】The research used a hydroponic culture method,the roses plants were grown in Hoagland nutrient solution containing 50%less Ca for a total span of 4 months.One month was dedicated to plant acclimatization,and 3 months for spray treatment.Two rose varieties(Rosa hybrida L.),cvs.Samurai and Jumilia plants were used as test materials and planted in pots containing 100%perlite(3-5 mm).After one month of culture,160 mg/kg CaNO3 solution was sprayed,and each treatment corresponded to the first,second,and third harvests,respectively.The plant and flower growth indicators and flower vase life were investigated after each harvesting immediately.【Results】A positive impact of foliar-applied Ca on stem characteristics,pedicel dimensions,corolla size,flower attributes,and vase life was found.Furthermore,a general trend was observed,wherein an increase in the number of harvesting stages led to improved traits.Notably,Jumilia rose consistently exhibited lower values for all studied traits,except for flower vase life,in comparison to the Samurai rose.While there were no significant differences in length values between Samurai and Jumilia roses due to calcium foliar application across the three harvesting stages.Duncan’s grouping revealed a specific effect on Jumilia roses during the third harvest stage.Calcium fertilizer significantly increased photosynthesis rates of of rose leaves in the calcium treatments compared with the control treatment.【Conclusions】Foliar spraying of calcium nitrate is an effective measure to promote the growth of roses and improve the yield,quality and bottle life of fresh cut flowers.
基金Project(51274242)supported by the National Natural Science Foundation of ChinaProject(2015CX001)supported by the Innovation-driven Plan of Central South University,China
文摘A safe,economical treatment of hazardous chromium-bearing vanadate residue(CVR)will significantly benefit the clean production of chromate-bearing salts.This study investigated recovery of sodium vanadate and sodium chromate from CVR in sodium bicarbonate solution.Results indicate that the stability of calcium vanadate and calcium chromate depends on pH and[HCO3?].CaV2O6?4H2O transforms into CaV2O6?4H2O,CaV2O6?2H2O,CaV2O6,Ca2V2O7?2H2O,and Ca5(VO4)3(OH)when pH increases from 7.51 to 12.32.Increasing pH and reducing CVR dosage improve the vanadate extraction rate,and high V2O5 and Na2Cr2O7?2H2O extraction rates are achieved in dilute NaHCO3 solution.Moreover,addition of NaOH positively contributes to the recovery of vanadate and chromate from CVR.Over 95%V2O5 and Na2Cr2O7?2H2O in CVR can be extracted from 60 g/L NaHCO3 and 30 g/L NaOH solutions at 90°C for 2 h.In order to reduce the hazardous residue containing chromate after recovery of CVR,calcium circulation is presented.Results show that more than 60%lime can be saved with fresh residue addition to remove vanadate from sodium chromate solution due to the active CaCO3.Moreover,no lime is required in removal of vanadate when the roasting residue is added.Therefore,a novel process is developed for utilization of CVR.
基金Projects(51874017,52174236)supported by the National Natural Science Foundation of China。
文摘The increasing demand for iron ore in the world causes the continuous exhaustion of magnetite resources.The utilization of high-phosphorus iron ore becomes the focus.With calcium carbonate(CaCO_(3)),calcium chloride(CaCl_(2)),or calcium sulfate(CaSO_(4))as additive,the process of direct reduction and phosphorus removal of high-phosphorus iron ore(phosphorus mainly occurred in the form of Fe_(3)PO_(7) and apatite)was studied by using the technique of direct reductiongrinding-magnetic separation.The mechanism of calcium compounds to reduce phosphorus was investigated from thermodynamics,iron metallization degree,mineral composition and microstructure.Results showed that Fe_(3)PO_(7) was reduced to elemental phosphorus without calcium compounds.The iron-phosphorus alloy was generated by react of metallic iron and phosphorus,resulting in high phosphorus in reduced iron products.CaCO_(3) promoted the reduction of hematite and magnetite,and improved iron metallization degree,but inhibited the growth of metallic iron particles.CaCl_(2) strengthened the growth of iron particles.However,the recovery of iron was reduced due to the formation of volatile FeCl_(2).CaSO_(4) promoted the growth of iron particles,but the recovery of iron was drastically reduced due to the formation of non-magnetic FeS.CaCO_(3),CaCl_(2) or CaSO_(4) could react with Fe_(3)PO_(7) to form calcium phosphate(Ca_(3)(PO_(4))_(2)).With the addition of CaCO_(3),Ca_(3)(PO_(4))_(2) was closely combined with fine iron particles.It is difficult to separate iron and phosphorus by grinding and magnetic separation,resulting in the reduced iron product phosphorus content of 0.18%.In the presence of CaCl_(2) or CaSO_(4),the boundary between the generated Ca_(3)(PO_(4))_(2) and the metallic iron particles was obvious.Phosphorus was removed by grinding and magnetic separation,and the phosphorus content in the reduced iron product was less than 0.10%.
基金Project(AA18242008)supported by the Guangxi Science&Technology Major Project,ChinaProject(HZXYKFKT201904)supported by the Opening Project of Guangxi Key Laboratory of Calcium Carbonate Resources Comprehensive Utilization,China。
文摘Calcium carbonate,which is widely employed as a filler added into the polymer matrix,has large numbers of applications owing to the excellent properties such as low cost,non-toxicity,high natural reserves and biocompatibility.Nevertheless,in order to obtain the good filling effect,calcium carbonate needs to be surface modified by organic molecules so as to enhance the dispersion and compatibility within the composites.This review paper systematically introduces the theory,methods,and applications progress of calcium carbonate with surface modification.Additionally,the key factors that affect the properties of the composites as well as the current difficulties and challenges are highlighted.The current research progress and potential application prospects of calcium carbonate in the fields of plastics,rubber,paper,medicine and environmental protection are discussed as well.Generally,this review can provide valuable reference for the modification and comprehensive utilization of calcium carbonate.
文摘The influences of pH value, electrolyte temperature and loading time on depositing calcium phosphate coating on pure titanium substrate by electrodeposition process were investigated. The process was carried out with an electrochemical work-station supplying a direct current power at potential of -0.8V （vs SCE）. The electrolyte consists of 7 mmol·L-1 CaCl2·2H2O, 3 mmol·L-1 Ca（H2PO4）2·H2O and 2.5% H2O2. NaOH and HCl solutions were used to adjust pH value. The deposited samples were characterized by X-ray diffraction and scanning electron microscope. The comparison of the deposits obtained at lower and higher pH values demonstrates that the crystallization process at the interface is favoured by high pH value. With temperature increasing, the deposited hydroxyapatite is occasionally of plate-like shape, and the width and the length of the deposited calcium phosphates at 65 ℃ are larger than those at 55 ℃. Therefore, it is confirmed that the morphology and microstructure of electrochemically deposited calcium phosphates can be regulated. Additionally, the coating formed in electrolyte with H2O2 additive is homogeneous and the evolution of H2 bubble can be eliminated.
基金Project(50904015) supported by the National Natural Science Foundation of ChinaProject(N090402012) supported by the Fundamental Research Funds for Central Universities of China
文摘To investigate the hydrogen permeability of calcium fluoride used for electroslag remelting （ESR） process, ＂Gas-slag- metal＂ osmosis process under argon atmosphere saturated with water vapor at 318 K was used to study the hydrogen permeability of slag containing calcium fluoride. The results indicate that the conventional slag, consisting of 70% CaF2 and 30% A1203, has the lowest hydrogen permeability. A parameter EH was proposed for evaluation of the hydrogen permeability of slags containing calcium fluoride. The hydrogen permeability decreases with increasing EH to a certain extent. An appropriate choice of slag for the ESR process can be obtained. These results also suggest that the hydrogen pick-up in steel after remelting might be reduced when a slag with low hydrogen permeability is used.
基金Projects(6512009004A,51908119,U1706222)supported by the National Natural Science Foundation of ChinaProject(BK20190367)supported by the Natural Science Foundation of Jiangsu Province,China。
文摘The interface properties between hydrated cement paste(hcp)and aggregates largely determine the various performances of concrete.In this work,molecular dynamics simulations were employed to explore the atomistic interaction mechanisms between the commonly used aggregate phase calcite/silica and calcium silicate hydrates(C-S-H),as well as the effect of moisture.The results suggest that the C-S-H/calcite interface is relatively strong and stable under both dry and moist conditions,which is caused by the high-strength interfacial connections formed between calcium ions from calcite and high-polarity non-bridging oxygen atoms from the C-S-H surface.Silica can be also adsorbed on the dry C-S-H surface by the H-bonds;however,the presence of water molecules on the interface may substantially decrease the affinities.Furthermore,the dynamics interface separation tests of C-S-H/aggregates were also implemented by molecular dynamics.The shape of the calculated stress-separation distance curves obeys the quasi-static cohesive law obtained experimentally.The moisture conditions and strain rates were found to affect the separation process of C-S-H/silica.A wetter interface and smaller loading rate may lead to a lower adhesion strength.The mechanisms interpreted here may shed new lights on the understandings of hcp/aggregate interactions at a nano-length scale and creation of high performance cementitious materials.
基金Project(2013A090100013)supported by the Special Project on the Integration of Industry,Education and Research of Guangdong Province,ChinaProject(201407300993)supported by the High-Tech Research and Development Program of Xinjiang Uygur Autonomous Region,China
文摘Proper utilization of the FeSO4·7H2O waste slag generated from TiO2 industry is an urgent need, and Fe3O4 particles are currently being widely used in the wastewater flocculation field. In this work, magnetite was recovered from ferrous sulphate by a novel co-precipitation method with calcium hydroxide as the precipitant. Under optimum conditions, the obtained spherical magnetite particles are well crystallized with a Fe304 purity of 88.78%, but apt to aggregate with a median particle size of 1.83 μm. Magnetic measurement reveals the obtained Fe304 particles are soft magnetic with a saturation magnetization of 81.73 A-m2/kg. In addition, a highly crystallized gypsum co-product is obtained in blocky or irregular shape. Predictably, this study would provide additional opportunities for future application of low-cost Fe3O4 particles in water treatment field.
基金Project(2013JSJJ028)supported by the Key Programs of Science and Technology from Hunan Province,China
文摘It is generally known that the large formation amount of calcium ferrite is favorable for the iron ore sintering. The effects of sintering temperature and O2 content of inlet gas on the calcium ferrite formation characteristic of typical iron ores, including hematite, limonite, specularite and magnetite, were investigated. And the effect of O2 content on the microstructure of the roasted briquettes was also studied in detail. The results show the amount of calcium ferrite initially increases then decreases with the increase of the sintering temperature. The temperature of maximum calcium ferrite generation amount is determined as follows： for hematite and limonite it is 1275 ~C, whereas for specularite and magnetite, 1250℃. The maximum contents of calcium ferrite for hematite, limonite, specularite and magnetite under the optimal sintering temperature are 73%, 82%, 67% and 63%, respectively. Increasing O2 content of the airflow is advantageous to the formation of calcium ferrite. Relatively, the effect of O2 content on the calcium ferrite formation of magnetite is the most pronounced, while O2 content of inlet gas has little effect on the calcium ferrite formation of limonite.
基金Projects(51674075,51774079)supported by the National Natural Science Foundation of ChinaProject(2018YFC1901903)supported by the National Key R&D Program of ChinaProject(N182508026)supported by the Fundamental Research Funds for the Central Universities of China。
文摘The crystal structure,formation kinetics and micro-morphology of CaO·SiO2 during high-temperature sintering process were studied in low-calcium system by XRD,FT-IR,Raman and SEM-EDS methods.When the molar ratio of CaCO3 to SiO2 is 1.0,β-2CaO·SiO2 forms firstly during the heating process,and then CaO·SiO2 is generated by the transformation reaction of pre-formed 2CaO·SiO2 with SiO2.3CaO·SiO2 and 3CaO·2SiO2 do not form either in the heating or sintering process.Rising the sintering temperature and prolonging the holding time promote the phase transition of 2CaO·SiO2 to CaO·SiO2,resulting in the sintered products a small blue shift and broadening in Raman spectra.The content of CS can reach 97.4%when sintered at 1400℃ for 1 h.The formation kinetics of CaO·SiO2 follows the second-order chemical reaction model,and the corresponding apparent activation energy and pre-exponential factor are 505.82 kJ/mol and 2.16×10^14 s^−1 respectively.
基金Supported by the National Key Research and Development Program of China(2017YFD0801100)Science and Technology Innovation Project from Chinese Academy of Agricultural Sciences(CAAS-XTCX2016018)
文摘Accumulation characteristics and antioxidant enzyme activities in rice seedlings from a high-cadmium(Cd)-accumulating cultivar Tyou705(705)and low-Cd-accumulating cultivar Xiangzao 24(X24)were studied,based on hydroponic experiment.Three levels of calcium(Ca)(0,1.0 and 2.0 mmol?L-1)and two levels of Cd(0 and 2.7μmol·L^-1)were designed in this study.Experimental results showed that the tolerance of rice seedlings to Cd stress was significantly improved by adding 1.0 or 2.0 mmol·L^-1 Ca.Comparing with Cd control,adding 1.0 mmol·L^-1 Ca made the seedling biomass of 705 and X24 increased by 68.9%and 116.2%,respectively.Addition of 2.0 mmol·L^-1 Ca was more effective than that of 1.0 mmol·L^-1 Ca in promoting rice biomass,root tip number,total root length,and total root surface area.After addition of 2.0 mmol·L^-1 Ca and Cd contents in roots and shoots of 705 decreased by 23.5%and 35.2%,Cd in roots and shoots of X24 decreased by 22.2%and 18.7%,respectively.Addition of Ca significantly promoted the accumulation of Mg,K and Zn in shoots and roots of X24 under Cd stress environment and eliminated the inhibitory effect of Cd on the uptake of these elements.Both 1.0 and 2.0 mmol·L^-1 Ca significantly decreased the activities of superoxide dismutase(SOD)and peroxidase(POD)in rice seedlings under Cd stress.These results indicated that 1.0-2.0 mmol·L^-1 Ca could significantly reduce Cd content in rice roots and shoots,promote the uptake and accumulation of essential elements and alleviate the oxidative damage caused by Cd stress in rice seedlings.
基金Project(21376273)supported by the National Natural Science Foundation of ChinaProject(2010FJ1011)supported by the Research Fund of Science and Technology of Hunan Province,China
文摘Electrolytic manganese residue(EMR), a high volume byproduct resulting from the electrolytic manganese industry, was used as a cheap and abundant chemical source for preparing MnO2 and EMR-made calcium silicate hydrate(EMR-CSH). The MnO2 is successfully synthesized from the metal cations extracted from EMR, which can effectively recycle the manganese in the EMR. By the combination of XRD, SEM and EDX analysis, the as-prepared MnO2 is found to exhibit a single-phase with the purity of 90.3%. Furthermore, EMR-CSH is synthesized from EMR via hydrothermal method. Based on the detailed analyses using XRD, FT-IR, FE-SEM, EDX and BET surface area measurement, the product synthesized under the optimum conditions(p H 12.0 and 100 °C) is identified to be a calcium silicate hydrate with a specific surface area of 205 m2/g incorporating the slag-derived metals(Al and Mg) in its structure. The as-synthesized material shows good adsorption properties for removal of Mn2+ and phosphate ions diluted in water, making it a promising candidate for efficient bulk wastewater treatment. This conversion process, which enables us to fabricate two different kinds of valuable materials from EMR at low cost and through convenient preparation steps, is surely beneficial from the viewpoint of the chemical and economical use of EMR.
基金Project(2005CB623901) supported by the Major State Basic Research and Development Program of China
文摘Calcium phosphate film was prepared by electrochemical deposition technology. Subsequently, the alkaline treatment process of calcium phosphate film in 0.1 mol/L NaOH solution was monitored on real time by the piezoelectric quartz crystal impedance （PQCI） technique. The variations of morphology and composition for the alkaline treatment products were characterized by scanning electron microscopy （SEM）, Fourier transform infrared （FT-IR） and X-ray diffraction （XRD）, respectively. The dynamic variations of calcium phosphate can be characterized by the change of equivalent circuit parameters. The results show that the forming process of hydroxyapatite （HA） is composed of three stages： （1） acidic calcium phosphate dissolution; （2） phase transformation; and （3） HA formation. Furthermore, the correlative kinetic equations and parameters are obtained by fitting the static capacitance （C8）-time curves.
基金Project(51274247) supported by the National Natural Science Foundation of ChinaProject(2014zzts177) support by the Fundamental Research Funds for the Central Universities,China
文摘Porous and dense TiNi alloys were successfully fabricated by powder metallurgy(P/M) method, and to further improve their surface biocompatibility, surface modification techniques including grind using silicon-carbide(SiC) paper, acid etching and alkali treatment were employed to produce either irregularly rough surface or micro-porous surface roughness. X-ray diffractometry(XRD), scanning electron microscopy(SEM) and energy dispersive X-ray spectroscopy(EDX) attached to SEM were used to characterize surface structure and the Ca-P coatings. Effects of the above surface treatments on the surface morphology, apatite forming ability were systematically investigated. Results indicate that all the above surface treatments increase the apatite forming ability of TiNi alloys in varying degrees when soaked in simulated body fluid(SBF). More apatite coatings formed on TiNi samples sintered at 1050℃ and 1100℃ due to their high porosity and pure TiNi phase that is beneficial to heterogeneous nucleation. Furthermore, more uniform apatite was fabricated on the sample sintered from the mixture of Ni and Ti powders.
