Currently,the use of intelligent systems for the automatic recognition of targets in the fields of defence and military has increased significantly.The primary advantage of these systems is that they do not need human...Currently,the use of intelligent systems for the automatic recognition of targets in the fields of defence and military has increased significantly.The primary advantage of these systems is that they do not need human participation in target recognition processes.This paper uses the particle swarm optimization(PSO)algorithm to select the optimal features in the micro-Doppler signature of sonar targets.The microDoppler effect is referred to amplitude/phase modulation on the received signal by rotating parts of a target such as propellers.Since different targets'geometric and physical properties are not the same,their micro-Doppler signature is different.This Inconsistency can be considered a practical issue(especially in the frequency domain)for sonar target recognition.Despite using 128-point fast Fourier transform(FFT)for the feature extraction step,not all extracted features contain helpful information.As a result,PSO selects the most optimum and valuable features.To evaluate the micro-Doppler signature of sonar targets and the effect of feature selection on sonar target recognition,the simplest and most popular machine learning algorithm,k-nearest neighbor(k-NN),is used,which is called k-PSO in this paper because of the use of PSO for feature selection.The parameters measured are the correct recognition rate,reliability rate,and processing time.The simulation results show that k-PSO achieved a 100%correct recognition rate and reliability rate at 19.35 s when using simulated data at a 15 dB signal-tonoise ratio(SNR)angle of 40°.Also,for the experimental dataset obtained from the cavitation tunnel,the correct recognition rate is 98.26%,and the reliability rate is 99.69%at 18.46s.Therefore,the k-PSO has an encouraging performance in automatically recognizing sonar targets when using experimental datasets and for real-world use.展开更多
The identification of intercepted radio fuze modulation types is a prerequisite for decision-making in interference systems.However,the electromagnetic environment of modern battlefields is complex,and the signal-to-n...The identification of intercepted radio fuze modulation types is a prerequisite for decision-making in interference systems.However,the electromagnetic environment of modern battlefields is complex,and the signal-to-noise ratio(SNR)of such environments is usually low,which makes it difficult to implement accurate recognition of radio fuzes.To solve the above problem,a radio fuze automatic modulation recognition(AMR)method for low-SNR environments is proposed.First,an adaptive denoising algorithm based on data rearrangement and the two-dimensional(2D)fast Fourier transform(FFT)(DR2D)is used to reduce the noise of the intercepted radio fuze intermediate frequency(IF)signal.Then,the textural features of the denoised IF signal rearranged data matrix are extracted from the statistical indicator vectors of gray-level cooccurrence matrices(GLCMs),and support vector machines(SVMs)are used for classification.The DR2D-based adaptive denoising algorithm achieves an average correlation coefficient of more than 0.76 for ten fuze types under SNRs of-10 d B and above,which is higher than that of other typical algorithms.The trained SVM classification model achieves an average recognition accuracy of more than 96%on seven modulation types and recognition accuracies of more than 94%on each modulation type under SNRs of-12 d B and above,which represents a good AMR performance of radio fuzes under low SNRs.展开更多
Automatic modulation recognition(AMR)of radiation source signals is a research focus in the field of cognitive radio.However,the AMR of radiation source signals at low SNRs still faces a great challenge.Therefore,the ...Automatic modulation recognition(AMR)of radiation source signals is a research focus in the field of cognitive radio.However,the AMR of radiation source signals at low SNRs still faces a great challenge.Therefore,the AMR method of radiation source signals based on two-dimensional data matrix and improved residual neural network is proposed in this paper.First,the time series of the radiation source signals are reconstructed into two-dimensional data matrix,which greatly simplifies the signal preprocessing process.Second,the depthwise convolution and large-size convolutional kernels based residual neural network(DLRNet)is proposed to improve the feature extraction capability of the AMR model.Finally,the model performs feature extraction and classification on the two-dimensional data matrix to obtain the recognition vector that represents the signal modulation type.Theoretical analysis and simulation results show that the AMR method based on two-dimensional data matrix and improved residual network can significantly improve the accuracy of the AMR method.The recognition accuracy of the proposed method maintains a high level greater than 90% even at -14 dB SNR.展开更多
Airborne LIDAR can flexibly obtain point cloud data with three-dimensional structural information,which can improve its effectiveness of automatic target recognition in the complex environment.Compared with 2D informa...Airborne LIDAR can flexibly obtain point cloud data with three-dimensional structural information,which can improve its effectiveness of automatic target recognition in the complex environment.Compared with 2D information,3D information performs better in separating objects and background.However,an aircraft platform can have a negative influence on LIDAR obtained data because of various flight attitudes,flight heights and atmospheric disturbances.A structure of global feature based 3D automatic target recognition method for airborne LIDAR is proposed,which is composed of offline phase and online phase.The performance of four global feature descriptors is compared.Considering the summed volume region(SVR) discrepancy in real objects,SVR selection is added into the pre-processing operations to eliminate mismatching clusters compared with the interested target.Highly reliable simulated data are obtained under various sensor’s altitudes,detection distances and atmospheric disturbances.The final experiments results show that the added step increases the recognition rate by above 2.4% and decreases the execution time by about 33%.展开更多
In order to improve measurement accuracy of moving target signals, an automatic target recognition model of moving target signals was established based on empirical mode decomposition(EMD) and support vector machine(S...In order to improve measurement accuracy of moving target signals, an automatic target recognition model of moving target signals was established based on empirical mode decomposition(EMD) and support vector machine(SVM). Automatic target recognition process on the nonlinear and non-stationary of Doppler signals of military target by using automatic target recognition model can be expressed as follows. Firstly, the nonlinearity and non-stationary of Doppler signals were decomposed into a set of intrinsic mode functions(IMFs) using EMD. After the Hilbert transform of IMF, the energy ratio of each IMF to the total IMFs can be extracted as the features of military target. Then, the SVM was trained through using the energy ratio to classify the military targets, and genetic algorithm(GA) was used to optimize SVM parameters in the solution space. The experimental results show that this algorithm can achieve the recognition accuracies of 86.15%, 87.93%, and 82.28% for tank, vehicle and soldier, respectively.展开更多
There are many motors in operation or on standby in nuclear power plants,and the startup of group motors will have a great impact on the voltage of the emergency bus.At present,there is no special or inexpensive softw...There are many motors in operation or on standby in nuclear power plants,and the startup of group motors will have a great impact on the voltage of the emergency bus.At present,there is no special or inexpensive software to solve this problem,and the experience of engineers is not accurate enough.Therefore,this paper developed a method and system for the startup calculation of group motors in nuclear power plants and proposed an automatic generation method of circuit topology in nuclear power plants.Each component in the topology was given its unique number,and the component class could be constructed according to its type and upper and lower connections.The subordination and topology relationship of switches,buses,and motors could be quickly generated by the program according to the component class,and the simplified direct power flow algorithm was used to calculate the power flow for the startup of group motors according to the above relationship.Then,whether the bus voltage is in the safe range and whether the voltage exceeds the limit during the startup of the group motor could be judged.The practical example was used to verify the effectiveness of the method.Compared with other professional software,the method has high efficiency and low cost.展开更多
The mixture of factor analyzers （MFA） can accurately describe high resolution range profile （HRRP） statistical charac- teristics. But how to determine the proper number of the models is a problem. This paper devel...The mixture of factor analyzers （MFA） can accurately describe high resolution range profile （HRRP） statistical charac- teristics. But how to determine the proper number of the models is a problem. This paper develops a variational Bayesian mixture of factor analyzers （VBMFA） model. This procedure can obtain a lower bound on the Bayesian integral using the Jensen＇s inequality. An analytical solution of the Bayesian integral could be obtained by a hypothesis that latent variables in the model are indepen- dent. During computing the parameters of the model, birth-death moves are utilized to determine the optimal number of model au- tomatically. Experimental results for measured data show that the VBMFA method has better recognition performance than FA and MFA method.展开更多
Abstract: A array of the azimuthally averaged range-profile vectors and the inter-class and intra-class divergence matrixesare constructed iwth many frames of the high resolution range profiles which result from radar...Abstract: A array of the azimuthally averaged range-profile vectors and the inter-class and intra-class divergence matrixesare constructed iwth many frames of the high resolution range profiles which result from radar echoes of airplanes. Takingthe methods of whitening transformation and SVD produces a system of subspace vectors for target recognition. Where-upon, a template library for target recognition is built by the projection of a class-mean vector made from the radar dataonto the subspace for recognition. By Euclidean distance, a comparison is made between the above projection and eachtemplate in the library, to decide which class the target belongs to. Finally, simulations with the experimental radar dataarte given to show that the proposed method is robust to variation in azimuth and immune to additive Gaussian noisewhen SNR≥5dB.展开更多
文摘Currently,the use of intelligent systems for the automatic recognition of targets in the fields of defence and military has increased significantly.The primary advantage of these systems is that they do not need human participation in target recognition processes.This paper uses the particle swarm optimization(PSO)algorithm to select the optimal features in the micro-Doppler signature of sonar targets.The microDoppler effect is referred to amplitude/phase modulation on the received signal by rotating parts of a target such as propellers.Since different targets'geometric and physical properties are not the same,their micro-Doppler signature is different.This Inconsistency can be considered a practical issue(especially in the frequency domain)for sonar target recognition.Despite using 128-point fast Fourier transform(FFT)for the feature extraction step,not all extracted features contain helpful information.As a result,PSO selects the most optimum and valuable features.To evaluate the micro-Doppler signature of sonar targets and the effect of feature selection on sonar target recognition,the simplest and most popular machine learning algorithm,k-nearest neighbor(k-NN),is used,which is called k-PSO in this paper because of the use of PSO for feature selection.The parameters measured are the correct recognition rate,reliability rate,and processing time.The simulation results show that k-PSO achieved a 100%correct recognition rate and reliability rate at 19.35 s when using simulated data at a 15 dB signal-tonoise ratio(SNR)angle of 40°.Also,for the experimental dataset obtained from the cavitation tunnel,the correct recognition rate is 98.26%,and the reliability rate is 99.69%at 18.46s.Therefore,the k-PSO has an encouraging performance in automatically recognizing sonar targets when using experimental datasets and for real-world use.
基金National Natural Science Foundation of China under Grant No.61973037China Postdoctoral Science Foundation 2022M720419 to provide fund for conducting experiments。
文摘The identification of intercepted radio fuze modulation types is a prerequisite for decision-making in interference systems.However,the electromagnetic environment of modern battlefields is complex,and the signal-to-noise ratio(SNR)of such environments is usually low,which makes it difficult to implement accurate recognition of radio fuzes.To solve the above problem,a radio fuze automatic modulation recognition(AMR)method for low-SNR environments is proposed.First,an adaptive denoising algorithm based on data rearrangement and the two-dimensional(2D)fast Fourier transform(FFT)(DR2D)is used to reduce the noise of the intercepted radio fuze intermediate frequency(IF)signal.Then,the textural features of the denoised IF signal rearranged data matrix are extracted from the statistical indicator vectors of gray-level cooccurrence matrices(GLCMs),and support vector machines(SVMs)are used for classification.The DR2D-based adaptive denoising algorithm achieves an average correlation coefficient of more than 0.76 for ten fuze types under SNRs of-10 d B and above,which is higher than that of other typical algorithms.The trained SVM classification model achieves an average recognition accuracy of more than 96%on seven modulation types and recognition accuracies of more than 94%on each modulation type under SNRs of-12 d B and above,which represents a good AMR performance of radio fuzes under low SNRs.
基金National Natural Science Foundation of China under Grant No.61973037China Postdoctoral Science Foundation under Grant No.2022M720419。
文摘Automatic modulation recognition(AMR)of radiation source signals is a research focus in the field of cognitive radio.However,the AMR of radiation source signals at low SNRs still faces a great challenge.Therefore,the AMR method of radiation source signals based on two-dimensional data matrix and improved residual neural network is proposed in this paper.First,the time series of the radiation source signals are reconstructed into two-dimensional data matrix,which greatly simplifies the signal preprocessing process.Second,the depthwise convolution and large-size convolutional kernels based residual neural network(DLRNet)is proposed to improve the feature extraction capability of the AMR model.Finally,the model performs feature extraction and classification on the two-dimensional data matrix to obtain the recognition vector that represents the signal modulation type.Theoretical analysis and simulation results show that the AMR method based on two-dimensional data matrix and improved residual network can significantly improve the accuracy of the AMR method.The recognition accuracy of the proposed method maintains a high level greater than 90% even at -14 dB SNR.
基金This research was supported by National Natural Science Foundation of China(No.61271353,61871389)Major Funding Projects of National University of Defense Technology(No.ZK18-01-02)Foundation of State Key Laboratory of Pulsed Power Laser Technology(No.SKL2018ZR09).
文摘Airborne LIDAR can flexibly obtain point cloud data with three-dimensional structural information,which can improve its effectiveness of automatic target recognition in the complex environment.Compared with 2D information,3D information performs better in separating objects and background.However,an aircraft platform can have a negative influence on LIDAR obtained data because of various flight attitudes,flight heights and atmospheric disturbances.A structure of global feature based 3D automatic target recognition method for airborne LIDAR is proposed,which is composed of offline phase and online phase.The performance of four global feature descriptors is compared.Considering the summed volume region(SVR) discrepancy in real objects,SVR selection is added into the pre-processing operations to eliminate mismatching clusters compared with the interested target.Highly reliable simulated data are obtained under various sensor’s altitudes,detection distances and atmospheric disturbances.The final experiments results show that the added step increases the recognition rate by above 2.4% and decreases the execution time by about 33%.
基金Projects(61471370,61401479)supported by the National Natural Science Foundation of China
文摘In order to improve measurement accuracy of moving target signals, an automatic target recognition model of moving target signals was established based on empirical mode decomposition(EMD) and support vector machine(SVM). Automatic target recognition process on the nonlinear and non-stationary of Doppler signals of military target by using automatic target recognition model can be expressed as follows. Firstly, the nonlinearity and non-stationary of Doppler signals were decomposed into a set of intrinsic mode functions(IMFs) using EMD. After the Hilbert transform of IMF, the energy ratio of each IMF to the total IMFs can be extracted as the features of military target. Then, the SVM was trained through using the energy ratio to classify the military targets, and genetic algorithm(GA) was used to optimize SVM parameters in the solution space. The experimental results show that this algorithm can achieve the recognition accuracies of 86.15%, 87.93%, and 82.28% for tank, vehicle and soldier, respectively.
基金Key Project of National Natural Science Foundation of China(52237008)Beijing Municipal Education Commission Research Program Funding Project(KM202111232022)。
文摘There are many motors in operation or on standby in nuclear power plants,and the startup of group motors will have a great impact on the voltage of the emergency bus.At present,there is no special or inexpensive software to solve this problem,and the experience of engineers is not accurate enough.Therefore,this paper developed a method and system for the startup calculation of group motors in nuclear power plants and proposed an automatic generation method of circuit topology in nuclear power plants.Each component in the topology was given its unique number,and the component class could be constructed according to its type and upper and lower connections.The subordination and topology relationship of switches,buses,and motors could be quickly generated by the program according to the component class,and the simplified direct power flow algorithm was used to calculate the power flow for the startup of group motors according to the above relationship.Then,whether the bus voltage is in the safe range and whether the voltage exceeds the limit during the startup of the group motor could be judged.The practical example was used to verify the effectiveness of the method.Compared with other professional software,the method has high efficiency and low cost.
基金supported in part by the National Natural Science Foundation of China(60772140)the Program for Cheung Kong Scholarsand Innovative Research Team in University(IRT0645)
文摘The mixture of factor analyzers （MFA） can accurately describe high resolution range profile （HRRP） statistical charac- teristics. But how to determine the proper number of the models is a problem. This paper develops a variational Bayesian mixture of factor analyzers （VBMFA） model. This procedure can obtain a lower bound on the Bayesian integral using the Jensen＇s inequality. An analytical solution of the Bayesian integral could be obtained by a hypothesis that latent variables in the model are indepen- dent. During computing the parameters of the model, birth-death moves are utilized to determine the optimal number of model au- tomatically. Experimental results for measured data show that the VBMFA method has better recognition performance than FA and MFA method.
基金This project was supported by Advanced National Defence Program of China(41307050103)Advanced National Defence Found of China(00JS24.3.2DZ0117).
文摘Abstract: A array of the azimuthally averaged range-profile vectors and the inter-class and intra-class divergence matrixesare constructed iwth many frames of the high resolution range profiles which result from radar echoes of airplanes. Takingthe methods of whitening transformation and SVD produces a system of subspace vectors for target recognition. Where-upon, a template library for target recognition is built by the projection of a class-mean vector made from the radar dataonto the subspace for recognition. By Euclidean distance, a comparison is made between the above projection and eachtemplate in the library, to decide which class the target belongs to. Finally, simulations with the experimental radar dataarte given to show that the proposed method is robust to variation in azimuth and immune to additive Gaussian noisewhen SNR≥5dB.
