In order to explore the mechanism of improving the surface wettability of low-energy polytetrafluoroethylene(PTFE)by new extended surfactants,five kinds of extended anionic surfactants with different numbers of oxypro...In order to explore the mechanism of improving the surface wettability of low-energy polytetrafluoroethylene(PTFE)by new extended surfactants,five kinds of extended anionic surfactants with different numbers of oxypropylene(PO)and oxyethylene(EO),octadecyl-(PO)_(m)-(EO)_(n)-sodium carboxylate(C_(18)PO_(m)EO_(n)C,m=5,10,15,n=5,10,15),were studied.The surface tension and contact angle of C_(18)PO_(m)EO_(n)C solution with different concentrations were measured,and the adhesion tension,PTFE-water interfacial tension,and adhesion work were calculated.It was found that the extended surfactant molecules adsorb on the surface of the solution and the PTFE-liquid interface simultaneously when the concentration is lower than the critical micelle concentration(cmc),and there was a linear relationship between surface tension and adhesion tension.The adsorption amount of C_(18)PO_(m)EO_(n)C at the PTFE-water interface was significantly lower than that on the surface of the solution.As the concentration increases above cmc,semi-micelle aggregates on the surface of PTFE are formed by C_(18)PO_(m)EO_(n)C molecules through hydrophobic interaction,and the hydrophilic group faces the solution to modify the surface of PTFE with high efficiency.展开更多
The viscoelastic micelle systems formed by novel anionic-nonionic dimeric surfactant and conventional cationic surfactant cetyltrimethylammonium(1631) were studied.The viscoelasticity,thixotropy,flow curves and consti...The viscoelastic micelle systems formed by novel anionic-nonionic dimeric surfactant and conventional cationic surfactant cetyltrimethylammonium(1631) were studied.The viscoelasticity,thixotropy,flow curves and constitutive equation for the novel viscoelastic micelle systems were investigated.The results show that the micelle systems possess viscoelasticity,thixotropy,and shear thinning property.Some micelle systems possess hysteresis loops showing both viscoelasticity and thixotropy.It is proved that the flow curves are characterized by the co-rotational Jeffreys constitutive equation correctly.展开更多
The wettability,surfactivity and the correlation between wettability and surfactivity of sodium diethylhexylphosphate,sodium diethylhexyl polyoxyethylene phosphate and their complex in NaOH solutions were studied.A co...The wettability,surfactivity and the correlation between wettability and surfactivity of sodium diethylhexylphosphate,sodium diethylhexyl polyoxyethylene phosphate and their complex in NaOH solutions were studied.A complex alkali resistant phosphate surfactant with good permeability was prepared.The wettability of surfactants was investigated by measuring the immersion time,sinking time and capillary effects of nature cotton grey fabric in NaOH solutions.The surfactivity of the surfactants was characterized by measuring the surface tension.The effect of the complex on the surface appearance of cotton grey fabric was also investigated with a scanning electron microscope(SEM) .The results show that all the surfactants exhibit good wettability for cotton grey fabric in 0.5-5.0 mol/L of NaOH solutions,the complex system exhibits better wettability in 5.0-7.0 mol/L of NaOH solutions,in comparison with either corresponding single surfactant component employed,and wettability is well correlative with the surfactivities of the surfactant.SEM images indicate that the cotton grey fabric is well wetted by the alkaline surfactant solution and the quality of fabric is improved.展开更多
The electrodeposition of nickel-silicon carbide coatings on a copper electrode was done by mixing SiC particles in the nickel electrodeposition solution.The influence of surfactants and silicon carbide particle size o...The electrodeposition of nickel-silicon carbide coatings on a copper electrode was done by mixing SiC particles in the nickel electrodeposition solution.The influence of surfactants and silicon carbide particle size on uniformity and quantity of silicon carbide particles in nickel-silicon carbide composite coatings was investigated.It was found that particle size affects the nucleation overpotential,with 40 nm silicon carbide nanoparticles more effective in promoting nickel nucleation than 500 nm particles due to an increase in active nucleation sites.In terms of surfactants,anionic surfactant sodium dodecyl sulfate(SDS)produced better dispersion of 40 nm silicon carbide particles than cationic surfactant cetyltrimethyl ammonium bromide(CTAB),but little difference was found between the two when 500 nm silicon carbide particles were used.Thus,although the suspension of silicon carbide particles can be improved and their co-deposition can be promoted with a cationic surfactant CTAB,it is less effective than an anionic surfactant SDS in terms of surface finish.展开更多
To reveal the potential effect of surfactant on improving surface wettability of copper ore,the droplet spreading behavior of sulfuric acid solution contained surfactant was visualized using high-speed camera and an i...To reveal the potential effect of surfactant on improving surface wettability of copper ore,the droplet spreading behavior of sulfuric acid solution contained surfactant was visualized using high-speed camera and an image processing method,and the solid-liquid interaction was discussed in this study.The results show that liquid surface tension and ore surface roughness are the main factors affecting surface wettability.The effect of sulfuric acid solution concentration and surfactants on the surface wettability of ore is revealed via quantitative spreading area,spreading coefficient,and contact angle.The results of droplet spreading experiment show that the higher concentration of surfactant and sulfuric acid solution result in improving the wettability of ore,spreading coefficient,and decreasing contact angle.The“leaching reaction coefficient”and“surface activity coefficient”are introduced to modify the mathematical expression of the equilibrium contact angle.展开更多
In this study,the effects of surfactants on the hydrodynamic characteristics of bubbles in shear-thinning fluids at low Reynolds number(Re<50)are investigated.The bubble terminal velocity and drag coefficient of bu...In this study,the effects of surfactants on the hydrodynamic characteristics of bubbles in shear-thinning fluids at low Reynolds number(Re<50)are investigated.The bubble terminal velocity and drag coefficient of bubble in clean and contaminated carboxymethylcellulose(CMC)solutions are obtained using a high-speed camera for examining differences.The results show that the existence of surfactant could reduce the terminal velocity of bubble at small volume(0.25wt%CMC:<100 mm3;0.50wt%CMC:<110 mm3),attributed to stiffening the bubble interface.However,this negative effect decreases and finally disappears with increasing bubble volume.The drag coefficient curves of the bubble in contaminated CMC solution exhibit behavior similar to that exhibited by a solid sphere at Re<10,indicating that internal circulation flow is absent at the bubble interface as compared to that in clean CMC solution.However,for 10<Re<40,a transition of drag curve from 24/Re to 16/Re in contaminated CMC solution is observed,which is easy at low SDS concentrations and high CMC concentrations.展开更多
To shorten the bioleaching cycle of arsenic-containing gold concentrate, surfactants were used to promote the interaction between bacteria and ore to increase the arsenic leaching rate. Three different kinds of surfac...To shorten the bioleaching cycle of arsenic-containing gold concentrate, surfactants were used to promote the interaction between bacteria and ore to increase the arsenic leaching rate. Three different kinds of surfactants were used to evaluate the effects of surfactants on the growth of bacteria and arsenic leaching rate of arsenic-containing gold concentrate. The mechanism underlying surfactant enhancement was also studied. Results show that when relatively low-concentration surfactants are added to the medium, no significant difference is observed in the growth and Fe2+ oxidation ability of the bacteria compared with no surfactant in the medium. However, only the anionic surfactant calcium lignosulfonate and the nonionic surfactant Tween 80 are found to improve the arsenic leaching rates. Their optimum mass concentrations are 30 and 80 mg/L, respectively. At such optimum mass concentrations, the arsenic leaching rates are approximately 13.7% and 9.1% higher than those without the addition of surfactant, respectively. Mechanism research reveals that adding the anionic surfactant calcium lignosulfonate improves the percentage of bacterial adhesion on the mineral surface and decreases the surface tension in the leaching solution.展开更多
The aim of this work was to investigate the effect of different surfactants on the removal efficiency of heavy metals in sewage sludge treated by a method combining bio-acidification with Fenton oxidation. Four surfac...The aim of this work was to investigate the effect of different surfactants on the removal efficiency of heavy metals in sewage sludge treated by a method combining bio-acidification with Fenton oxidation. Four surfactants were adopted such as anionic surfactant(sodium dodecyl benzene sulfonate, SDBS), nonionic surfactants(tween-20 and tween-60) and cationic surfactant(hexadecyl trimethyl ammonium chloride, HTAC), respectively. The indigenous sulfur-oxidizing bacteria in bio-acidification phase were enriched and cultured from fresh activated sludge obtained from a wastewater treatment plant. It is shown that different surfactants exhibited distinct effect on the removal efficiency of heavy metals from sewage sludge. The nonionic surfactants,especially tween-60, promotes the solubilization of heavy metals, while the anionic and cationic surfactants hinder the removal of heavy metals. Copper is efficiently leached. The removal efficiency of cadium is relatively lower than that of Cu due to the demand for rigorous p H value. Lead is leached with a low efficiency as the formation of low soluble Pb SO4 precipitates.展开更多
In the past four decades, there is a growing use of surfactant modified clay complexes in wide range of applications. The mostly used surfactants to modify the swelling clay minerals are cationic surfactants, such as ...In the past four decades, there is a growing use of surfactant modified clay complexes in wide range of applications. The mostly used surfactants to modify the swelling clay minerals are cationic surfactants, such as quaternary ammonium, which consists of two distinct moieties, a hydrophilic head, where the positive charge is concentrated, and a hydrophobic hydrocarbon chain tail. During the surface modification, this kind of surfactant molecules attach on the inner and outer surface of clay minerals, the hydrophilic surface of raw clay minerals may changed into hydrophobic surface. The changes of organophilicity and hydrophobicity of clay minerals enable them used in more wide fields, such as adsorbents for organic contaminant, geotechnical barriers, filling of nanocomposite, etc.展开更多
Some polarity terms of two groups of nitrogen-containing surfactants （six alkanolamides and nine polyoxyethylenated long chain amines） are measured through gas chromatography. The apparent methanol carbon number (CM...Some polarity terms of two groups of nitrogen-containing surfactants （six alkanolamides and nine polyoxyethylenated long chain amines） are measured through gas chromatography. The apparent methanol carbon number (CMeOH) and polarity index （IP） values are determined on the investigated surfactants as stationary phases in packed columns. Similarly, CMeOH and IP values are determined on simulated hydrophobic tail （SHT） models. The obtained results reveal that the introduction of SHT approach permits the distinction between the polarities of different surfactants and their head groups. The measured polarity terms are discussed as related to hydrophile-lipophile balance （HLB） number and the hydrophobic group carbon number （RCN）. Some equations relating the measured polarity values and these variable have been developed.展开更多
文摘In order to explore the mechanism of improving the surface wettability of low-energy polytetrafluoroethylene(PTFE)by new extended surfactants,five kinds of extended anionic surfactants with different numbers of oxypropylene(PO)and oxyethylene(EO),octadecyl-(PO)_(m)-(EO)_(n)-sodium carboxylate(C_(18)PO_(m)EO_(n)C,m=5,10,15,n=5,10,15),were studied.The surface tension and contact angle of C_(18)PO_(m)EO_(n)C solution with different concentrations were measured,and the adhesion tension,PTFE-water interfacial tension,and adhesion work were calculated.It was found that the extended surfactant molecules adsorb on the surface of the solution and the PTFE-liquid interface simultaneously when the concentration is lower than the critical micelle concentration(cmc),and there was a linear relationship between surface tension and adhesion tension.The adsorption amount of C_(18)PO_(m)EO_(n)C at the PTFE-water interface was significantly lower than that on the surface of the solution.As the concentration increases above cmc,semi-micelle aggregates on the surface of PTFE are formed by C_(18)PO_(m)EO_(n)C molecules through hydrophobic interaction,and the hydrophilic group faces the solution to modify the surface of PTFE with high efficiency.
基金Project(20276016) supported by the National Natural Science Foundation of China
文摘The viscoelastic micelle systems formed by novel anionic-nonionic dimeric surfactant and conventional cationic surfactant cetyltrimethylammonium(1631) were studied.The viscoelasticity,thixotropy,flow curves and constitutive equation for the novel viscoelastic micelle systems were investigated.The results show that the micelle systems possess viscoelasticity,thixotropy,and shear thinning property.Some micelle systems possess hysteresis loops showing both viscoelasticity and thixotropy.It is proved that the flow curves are characterized by the co-rotational Jeffreys constitutive equation correctly.
基金Project(20573079) supported by the National Natural Science Foundation of China
文摘The wettability,surfactivity and the correlation between wettability and surfactivity of sodium diethylhexylphosphate,sodium diethylhexyl polyoxyethylene phosphate and their complex in NaOH solutions were studied.A complex alkali resistant phosphate surfactant with good permeability was prepared.The wettability of surfactants was investigated by measuring the immersion time,sinking time and capillary effects of nature cotton grey fabric in NaOH solutions.The surfactivity of the surfactants was characterized by measuring the surface tension.The effect of the complex on the surface appearance of cotton grey fabric was also investigated with a scanning electron microscope(SEM) .The results show that all the surfactants exhibit good wettability for cotton grey fabric in 0.5-5.0 mol/L of NaOH solutions,the complex system exhibits better wettability in 5.0-7.0 mol/L of NaOH solutions,in comparison with either corresponding single surfactant component employed,and wettability is well correlative with the surfactivities of the surfactant.SEM images indicate that the cotton grey fabric is well wetted by the alkaline surfactant solution and the quality of fabric is improved.
基金Project(20180550242)supported by the Liaoning Science and Technology Plan,China。
文摘The electrodeposition of nickel-silicon carbide coatings on a copper electrode was done by mixing SiC particles in the nickel electrodeposition solution.The influence of surfactants and silicon carbide particle size on uniformity and quantity of silicon carbide particles in nickel-silicon carbide composite coatings was investigated.It was found that particle size affects the nucleation overpotential,with 40 nm silicon carbide nanoparticles more effective in promoting nickel nucleation than 500 nm particles due to an increase in active nucleation sites.In terms of surfactants,anionic surfactant sodium dodecyl sulfate(SDS)produced better dispersion of 40 nm silicon carbide particles than cationic surfactant cetyltrimethyl ammonium bromide(CTAB),but little difference was found between the two when 500 nm silicon carbide particles were used.Thus,although the suspension of silicon carbide particles can be improved and their co-deposition can be promoted with a cationic surfactant CTAB,it is less effective than an anionic surfactant SDS in terms of surface finish.
基金Project(LJ2020JCL002)supported by Education Commission of Liaoning Province,ChinaProject(51604138)supported by the National Natural Science Foundation of China。
文摘To reveal the potential effect of surfactant on improving surface wettability of copper ore,the droplet spreading behavior of sulfuric acid solution contained surfactant was visualized using high-speed camera and an image processing method,and the solid-liquid interaction was discussed in this study.The results show that liquid surface tension and ore surface roughness are the main factors affecting surface wettability.The effect of sulfuric acid solution concentration and surfactants on the surface wettability of ore is revealed via quantitative spreading area,spreading coefficient,and contact angle.The results of droplet spreading experiment show that the higher concentration of surfactant and sulfuric acid solution result in improving the wettability of ore,spreading coefficient,and decreasing contact angle.The“leaching reaction coefficient”and“surface activity coefficient”are introduced to modify the mathematical expression of the equilibrium contact angle.
基金Project(21406141)supported by the National Natural Science Foundation of ChinaProject(20141078)supported by the National Basic Research Program,ChinaProject(L201733)supported by the Research Foundation of Education Bureau of Liaoning Province,China
文摘In this study,the effects of surfactants on the hydrodynamic characteristics of bubbles in shear-thinning fluids at low Reynolds number(Re<50)are investigated.The bubble terminal velocity and drag coefficient of bubble in clean and contaminated carboxymethylcellulose(CMC)solutions are obtained using a high-speed camera for examining differences.The results show that the existence of surfactant could reduce the terminal velocity of bubble at small volume(0.25wt%CMC:<100 mm3;0.50wt%CMC:<110 mm3),attributed to stiffening the bubble interface.However,this negative effect decreases and finally disappears with increasing bubble volume.The drag coefficient curves of the bubble in contaminated CMC solution exhibit behavior similar to that exhibited by a solid sphere at Re<10,indicating that internal circulation flow is absent at the bubble interface as compared to that in clean CMC solution.However,for 10<Re<40,a transition of drag curve from 24/Re to 16/Re in contaminated CMC solution is observed,which is easy at low SDS concentrations and high CMC concentrations.
基金Projects(51104024,51374043)supported by National Natural Science Foundation of ChinaProject(10JJ6019)supported by Hunan Provincial Natural Science Foundation,China+1 种基金Project(10C0399)supported by Scientific Research Fund of Hunan Provincial Education Department,ChinaProject(2014SK3182)supported by Hunan Provincial Science&Technology Department,China
文摘To shorten the bioleaching cycle of arsenic-containing gold concentrate, surfactants were used to promote the interaction between bacteria and ore to increase the arsenic leaching rate. Three different kinds of surfactants were used to evaluate the effects of surfactants on the growth of bacteria and arsenic leaching rate of arsenic-containing gold concentrate. The mechanism underlying surfactant enhancement was also studied. Results show that when relatively low-concentration surfactants are added to the medium, no significant difference is observed in the growth and Fe2+ oxidation ability of the bacteria compared with no surfactant in the medium. However, only the anionic surfactant calcium lignosulfonate and the nonionic surfactant Tween 80 are found to improve the arsenic leaching rates. Their optimum mass concentrations are 30 and 80 mg/L, respectively. At such optimum mass concentrations, the arsenic leaching rates are approximately 13.7% and 9.1% higher than those without the addition of surfactant, respectively. Mechanism research reveals that adding the anionic surfactant calcium lignosulfonate improves the percentage of bacterial adhesion on the mineral surface and decreases the surface tension in the leaching solution.
基金Project(21276069)supported by the National Natural Science Foundation of ChinaProject(CX2012B139)supported by the Hunan Province Innovation Foundation for Postgraduate,China
文摘The aim of this work was to investigate the effect of different surfactants on the removal efficiency of heavy metals in sewage sludge treated by a method combining bio-acidification with Fenton oxidation. Four surfactants were adopted such as anionic surfactant(sodium dodecyl benzene sulfonate, SDBS), nonionic surfactants(tween-20 and tween-60) and cationic surfactant(hexadecyl trimethyl ammonium chloride, HTAC), respectively. The indigenous sulfur-oxidizing bacteria in bio-acidification phase were enriched and cultured from fresh activated sludge obtained from a wastewater treatment plant. It is shown that different surfactants exhibited distinct effect on the removal efficiency of heavy metals from sewage sludge. The nonionic surfactants,especially tween-60, promotes the solubilization of heavy metals, while the anionic and cationic surfactants hinder the removal of heavy metals. Copper is efficiently leached. The removal efficiency of cadium is relatively lower than that of Cu due to the demand for rigorous p H value. Lead is leached with a low efficiency as the formation of low soluble Pb SO4 precipitates.
文摘In the past four decades, there is a growing use of surfactant modified clay complexes in wide range of applications. The mostly used surfactants to modify the swelling clay minerals are cationic surfactants, such as quaternary ammonium, which consists of two distinct moieties, a hydrophilic head, where the positive charge is concentrated, and a hydrophobic hydrocarbon chain tail. During the surface modification, this kind of surfactant molecules attach on the inner and outer surface of clay minerals, the hydrophilic surface of raw clay minerals may changed into hydrophobic surface. The changes of organophilicity and hydrophobicity of clay minerals enable them used in more wide fields, such as adsorbents for organic contaminant, geotechnical barriers, filling of nanocomposite, etc.
文摘Some polarity terms of two groups of nitrogen-containing surfactants （six alkanolamides and nine polyoxyethylenated long chain amines） are measured through gas chromatography. The apparent methanol carbon number (CMeOH) and polarity index （IP） values are determined on the investigated surfactants as stationary phases in packed columns. Similarly, CMeOH and IP values are determined on simulated hydrophobic tail （SHT） models. The obtained results reveal that the introduction of SHT approach permits the distinction between the polarities of different surfactants and their head groups. The measured polarity terms are discussed as related to hydrophile-lipophile balance （HLB） number and the hydrophobic group carbon number （RCN）. Some equations relating the measured polarity values and these variable have been developed.
