In order to obtain better quality cookies, food 3D printing technology was employed to prepare cookies. The texture, color, deformation, moisture content, and temperature of the cookie as evaluation indicators, the in...In order to obtain better quality cookies, food 3D printing technology was employed to prepare cookies. The texture, color, deformation, moisture content, and temperature of the cookie as evaluation indicators, the influences of baking process parameters, such as baking time, surface heating temperature and bottom heating temperature, on the quality of the cookie were studied to optimize the baking process parameters. The results showed that the baking process parameters had obvious effects on the texture, color, deformation, moisture content, and temperature of the cookie. All of the roasting surface heating temperature, bottom heating temperature and baking time had positive influences on the hardness, crunchiness, crispiness, and the total color difference(ΔE) of the cookie. When the heating temperatures of the surfac and bottom increased, the diameter and thickness deformation rate of the cookie increased. However,with the extension of baking time, the diameter and thickness deformation rate of the cookie first increased and then decreased. With the surface heating temperature of 180 ℃, the bottom heating temperature of 150 ℃, and baking time of 15 min, the cookie was crisp and moderate with moderate deformation and uniform color. There was no burnt phenomenon with the desired quality. Research results provided a theoretical basis for cookie manufactory based on food 3D printing technology.展开更多
According to the aggregation method of experts＇ evaluation information in group decision-making,the existing methods of determining experts＇ weights based on cluster analysis take into account the expert＇s preferen...According to the aggregation method of experts＇ evaluation information in group decision-making,the existing methods of determining experts＇ weights based on cluster analysis take into account the expert＇s preferences and the consistency of expert＇s collating vectors,but they lack of the measure of information similarity.So it may occur that although the collating vector is similar to the group consensus,information uncertainty is great of a certain expert.However,it is clustered to a larger group and given a high weight.For this,a new aggregation method based on entropy and cluster analysis in group decision-making process is provided,in which the collating vectors are classified with information similarity coefficient,and the experts＇ weights are determined according to the result of classification,the entropy of collating vectors and the judgment matrix consistency.Finally,a numerical example shows that the method is feasible and effective.展开更多
With the fast growth of Chinese economic, more and more capital will be invested in environmental projects. How to select the environmental investment projects （alternatives） for obtaining the best environmental qua...With the fast growth of Chinese economic, more and more capital will be invested in environmental projects. How to select the environmental investment projects （alternatives） for obtaining the best environmental quality and economic benefits is an important problem for the decision makers. The purpose of this paper is to develop a decision-making model to rank a finite number of alternatives with several and sometimes conflicting criteria. A model for ranking the projects of municipal sewage treatment plants is proposed by using exports＇ information and the data of the real projects. And, the ranking result is given based on the PROMETHEE method. Furthermore, by means of the concept of the weight stability intervals （WSI）, the sensitivity of the ranking results to the size of criteria values and the change of weights value of criteria are discussed. The result shows that some criteria, such as “proportion of benefit to project cost”, will influence the ranking result of alternatives very strong while others not. The influence are not only from the value of criterion but also from the changing the weight of criterion. So, some criteria such as “proportion of benefit to project cost” are key critera for ranking the projects. Decision makers must be cautious to them.展开更多
In military service joint operations, when there are more operational forces, more multifarious materials are consumed, the support is more complex and fuzzy, the deployment of personnel is more rapid, and the support...In military service joint operations, when there are more operational forces, more multifarious materials are consumed, the support is more complex and fuzzy, the deployment of personnel is more rapid, and the support provided by wartime military material support powers can be more effective. When the principles,requirements, influencing factors and goals of military material support forces are deployed in wartime, an evaluation indicator system is established. Thus, a new combined empowerment method based on an analytic hierarchy process（AHP） is developed to calculate the subjective weights, and the rough entropy method is used to calculate the objective weights. Combination weights can be obtained by calculating the weight preference coefficient error, which is determined by combining the cooperative game method and the minimum deviation into objectives. This approach can determine the grey relation projection coefficient and synthesize the measure scheme superiority to finally optimize the deployment plan using the grey relation projection decision-making method. The results show that the method is feasible and effective;it can provide a more scientific and practical decision-making basis for the military material support power deployment in wartime.展开更多
For the problems of the consistency ranking of the group decision-making scheme,from the view of group negotiation and system coordination,the grey incidence analysis and Nash bargaining model are used to establish a ...For the problems of the consistency ranking of the group decision-making scheme,from the view of group negotiation and system coordination,the grey incidence analysis and Nash bargaining model are used to establish a consistency group decision-making method.First,the concepts of the consensus partial decision-making program and the consensus overall ideal decision-making program are defined,and then a multi-object optimization model is constructed based on the satisfaction maximization of group negotiation and deviation minimization of system coordination to determine the consensus partial decision-making program and the consensus overall ideal decision-making program.Moreover,the grey incidence analysis is exploited to measure the close degrees between them.Finally,a real case of the online product evaluation verifies the validity and rationality of the proposed model.展开更多
The uncertainty analysis is an effective sensitivity analysis method for system model analysis and optimization. However,the existing single-factor uncertainty analysis methods are not well used in the logistic suppor...The uncertainty analysis is an effective sensitivity analysis method for system model analysis and optimization. However,the existing single-factor uncertainty analysis methods are not well used in the logistic support systems with multiple decision-making factors. The multiple transfer parameters graphical evaluation and review technique（MTP-GERT） is used to model the logistic support process in consideration of two important factors, support activity time and support activity resources, which are two primary causes for the logistic support process uncertainty. On this basis,a global sensitivity analysis（GSA） method based on covariance is designed to analyze the logistic support process uncertainty. The aircraft support process is selected as a case application which illustrates the validity of the proposed method to analyze the support process uncertainty, and some feasible recommendations are proposed for aircraft support decision making on carrier.展开更多
Fault degradation prognostic, which estimates the time before a failure occurs and process breakdowns, has been recognized as a key component in maintenance strategies nowadays. Fault degradation processes are, in gen...Fault degradation prognostic, which estimates the time before a failure occurs and process breakdowns, has been recognized as a key component in maintenance strategies nowadays. Fault degradation processes are, in general,slowly varying and can be modeled by autoregressive models. However, industrial processes always show typical nonstationary nature, which may bring two challenges: how to capture fault degradation information and how to model nonstationary processes. To address the critical issues, a novel fault degradation modeling and online fault prognostic strategy is developed in this paper. First, a fault degradation-oriented slow feature analysis(FDSFA) algorithm is proposed to extract fault degradation directions along which candidate fault degradation features are extracted. The trend ability assessment is then applied to select major fault degradation features. Second, a key fault degradation factor(KFDF) is calculated to characterize the fault degradation tendency by combining major fault degradation features and their stability weighting factors. After that, a time-varying regression model with temporal smoothness regularization is established considering nonstationary characteristics. On the basis of updating strategy, an online fault prognostic model is further developed by analyzing and modeling the prediction errors. The performance of the proposed method is illustrated with a real industrial process.展开更多
A comparative proteomic analysis was performed to explore the mechanism of cell elongation in developing cotton fibers.The temporal changes of global proteomes at five representative
Process Capability Analysis (PCA) is a powerful too l to assess the ability of a process for manufacturing product that meets specific ations. The larger process capability index implies the higher process yield, a nd...Process Capability Analysis (PCA) is a powerful too l to assess the ability of a process for manufacturing product that meets specific ations. The larger process capability index implies the higher process yield, a nd the larger process capability index also indicates the lower process expected loss. Chen et al. (2001) has applied indices C pu, C pl, and C pk for evaluating the process capability for a multi-process product wi th smaller-the-better, larger-the-better, and nominal-the-best specificati ons respectively. However, C pk cannot reasonably reflect the process expected loss. In this paper, index C pn is selected to replace C pk. Indices C pu, C pl, and C pn are used to evalu ate the entire process capability for a multi-process product with smaller-the -better, larger-the-better, and nominal-the-best specifications respectivel y. An integrated process capability index for a multi-process product is propo sed. The relationship between process capability index and the process yield is introduced. A multi-process capability analysis chart (MPCAC), reasonably rev ealing the status of process capability for the entire product, is constructed f or practical application. An evaluating procedure of the process capability for the entire product is also provided.展开更多
The purpose of this study was to explore the quality of the Tibetan native hulless barley variety in depth and to evaluate the characteristics of its processing quality using ratio analysis.For this study,10 native ba...The purpose of this study was to explore the quality of the Tibetan native hulless barley variety in depth and to evaluate the characteristics of its processing quality using ratio analysis.For this study,10 native barley varieties were chosen with the detection of 24 quality indexes in order to build a system of comprehensive evaluation.The results of the factor analysis indicated that seven common factors with an eigenvalue greater than 1 were extracted,cumulatively accounting for 96.21%of the total variance.The first common factor,including ASP,GLU,SER,GLY,ARG,TYR and CYS contents,accounted for 33.82% of the variance.The second common factor,including ash,the total starch,soluble fiber,VB_(3),Cu,Mn,Na and beta-glucan contents,accounted for 19.46%of the variance.The third common factor,including the total dietary fiber,α-VE,K,Zn and glutelin.The fourth common factor,including B,Ba and prolamin,explained the barley starch character of the rheological property.The fifth common factor included crude fiber.The sixth and the seventh common factors did not account for a substantial amount of variance.According to the comprehensive evaluation model,the score consequence was as the following:Zangqing25>Pengnaigabu>Lhasa changhei>2004Qing21>Lhasa duanbai>Liangamu>Zhikonggaxia>lianmubai>Jiangreejiu>Longzihei.展开更多
In order to put forward countermeasures and suggestions of reform and innovation on the supply system of preschool education in China,the current change process of China’s preschool education supply system is analyze...In order to put forward countermeasures and suggestions of reform and innovation on the supply system of preschool education in China,the current change process of China’s preschool education supply system is analyzed using the historical analysis method.It is believed that there are still some outstanding problems in the supply system of the preschool education in China at present.According to the theory of supply and demand balance of economics and institutional change theory of new institutional economics,the future trend of China’s preschool education supply system is also analyzed.展开更多
To evaluate the effectiveness of weapon systems, the advantages and disadvantages of grey relational analysis and TOPSIS for multiattribute decision-making is pointed out, and an effectiveness evaluation model of weap...To evaluate the effectiveness of weapon systems, the advantages and disadvantages of grey relational analysis and TOPSIS for multiattribute decision-making is pointed out, and an effectiveness evaluation model of weapon systems by combining grey relational analysis and TOPSIS is proposed. The model aggregates the grey relational grade and the distance to a new integrated closeness and reflects not only the trend but also the situation of the alternative. The example illuminates that the model is effective for the effectiveness evaluation of weapon systems.展开更多
The wheel brake system safety is a complex problem which refers to its technical state, operating environment, human factors, etc., in aircraft landing taxiing process. Usually, professors consider system safety with ...The wheel brake system safety is a complex problem which refers to its technical state, operating environment, human factors, etc., in aircraft landing taxiing process. Usually, professors consider system safety with traditional probability techniques based on the linear chain of events. However, it could not comprehensively analyze system safety problems, especially in operating environment, interaction of subsystems, and human factors. Thus,we consider system safety as a control problem based on the system-theoretic accident model, the processes(STAMP) model and the system theoretic process analysis(STPA) technique to compensate the deficiency of traditional techniques. Meanwhile,system safety simulation is considered as system control simulation, and Monte Carlo methods are used which consider the range of uncertain parameters and operation deviation to quantitatively study system safety influence factors in control simulation. Firstly,we construct the STAMP model and STPA feedback control loop of the wheel brake system based on the system functional requirement. Then four unsafe control actions are identified, and causes of them are analyzed. Finally, we construct the Monte Carlo simulation model to analyze different scenarios under disturbance. The results provide a basis for choosing corresponding process model variables in constructing the context table and show that appropriate brake strategies could prevent hazards in aircraft landing taxiing.展开更多
A new modeling and monitoring approach for multi-mode processes is proposed.The method of similarity measure(SM) and kernel principal component analysis(KPCA) are integrated to construct SM-KPCA monitoring scheme,wher...A new modeling and monitoring approach for multi-mode processes is proposed.The method of similarity measure(SM) and kernel principal component analysis(KPCA) are integrated to construct SM-KPCA monitoring scheme,where SM method serves as the separation of common subspace and specific subspace.Compared with the traditional methods,the main contributions of this work are:1) SM consisted of two measures of distance and angle to accommodate process characters.The different monitoring effect involves putting on the different weight,which would simplify the monitoring model structure and enhance its reliability and robustness.2) The proposed method can be used to find faults by the common space and judge which mode the fault belongs to by the specific subspace.Results of algorithm analysis and fault detection experiments indicate the validity and practicability of the presented method.展开更多
A feasible method to improve the reliability and processing efficiency of large vibrating screen via the application of an elastic screen surface with multiple attached substructures （ESSMAS） was proposed. In the ES...A feasible method to improve the reliability and processing efficiency of large vibrating screen via the application of an elastic screen surface with multiple attached substructures （ESSMAS） was proposed. In the ESSMAS, every screen rod, with ends embedded into elastomer, is coupled to the main screen structure in a relatively flexible manner. The theoretical analysis was conducted, which consists of establishing dynamic model promoted from the fuzzy structure theory as well as calculating for the equivalent stiffness of each attached structure. According to the numerical simulation using the NEWMARK-fl integration method, this assembling pattern significantly leads to the screen surface/rod having larger vibration intensity than that of the corresponding position on screen structure, which specifically, with an averaged acceleration amplitude increasing ratio of 11.37% in theoretical analysis and 20.27% in experimental test. The experimental results, within a tolerant error, also confirm the established model and demonstrate the feasibility of ESSMAS.展开更多
In this paper, reliability of some typical non-Markov repairable systems, including series systems, m-out-of- n or majority vote systems, and n : m cross-strapping standby redundant systems with general repair-time di...In this paper, reliability of some typical non-Markov repairable systems, including series systems, m-out-of- n or majority vote systems, and n : m cross-strapping standby redundant systems with general repair-time distribution, are studied by applying the generalized Markov renewal process (GMRP). The stochastic behavior of the typical systems is analyzed here. Formulas for mean time to first system failure, MTBF, MTTR, and availability are then developed.展开更多
Numerous innovative heat recovery-to-power technologies have been resourcefully and technologically exploited to bridge the growing gap between energy needs and its sustainable and affordable supply.Among them,the pro...Numerous innovative heat recovery-to-power technologies have been resourcefully and technologically exploited to bridge the growing gap between energy needs and its sustainable and affordable supply.Among them,the proposed trilateral-cycle(TLC) power system exhibits high thermodynamic efficiency during heat recovery-to-power from low-to-medium temperature heat sources.The TLCs are proposed and analysed using n-pentane as working fluid for waste heat recovery-to-power generation from low-grade heat source to evaluate the thermodynamic efficiency of the cycles.Four different single stage TLC configurations with distinct working principles are modelled thermodynamically using engineering equation solver.Based on the thermodynamic framework,thermodynamic performance simulation and efficiency analysis of the cycles as well as the exergy efficiencies of the heating and condensing processes are carried out and compared in their efficiency.The results show that the simple TLC,recuperated TLC,reheat TLC and regenerative TLC operating at subcritical conditions with cycle high temperature of 473 K can attain thermal efficiencies of 21.97%,23.91%,22.07% and 22.9%,respectively.The recuperated TLC attains the highest thermodynamic efficiency at the cycle high temperature because of its lowest exergy destruction rates in the heat exchanger and condenser.The efficiency analysis carried out would assist in guiding thermodynamic process development and thermal integration of the proposed cycles.展开更多
基金Supported by Heilongjiang Provincial Fruit Tree Modernization Agro-industrial Technology Collaborative Innovation and Promotion System Project(2019-13)。
文摘In order to obtain better quality cookies, food 3D printing technology was employed to prepare cookies. The texture, color, deformation, moisture content, and temperature of the cookie as evaluation indicators, the influences of baking process parameters, such as baking time, surface heating temperature and bottom heating temperature, on the quality of the cookie were studied to optimize the baking process parameters. The results showed that the baking process parameters had obvious effects on the texture, color, deformation, moisture content, and temperature of the cookie. All of the roasting surface heating temperature, bottom heating temperature and baking time had positive influences on the hardness, crunchiness, crispiness, and the total color difference(ΔE) of the cookie. When the heating temperatures of the surfac and bottom increased, the diameter and thickness deformation rate of the cookie increased. However,with the extension of baking time, the diameter and thickness deformation rate of the cookie first increased and then decreased. With the surface heating temperature of 180 ℃, the bottom heating temperature of 150 ℃, and baking time of 15 min, the cookie was crisp and moderate with moderate deformation and uniform color. There was no burnt phenomenon with the desired quality. Research results provided a theoretical basis for cookie manufactory based on food 3D printing technology.
文摘According to the aggregation method of experts＇ evaluation information in group decision-making,the existing methods of determining experts＇ weights based on cluster analysis take into account the expert＇s preferences and the consistency of expert＇s collating vectors,but they lack of the measure of information similarity.So it may occur that although the collating vector is similar to the group consensus,information uncertainty is great of a certain expert.However,it is clustered to a larger group and given a high weight.For this,a new aggregation method based on entropy and cluster analysis in group decision-making process is provided,in which the collating vectors are classified with information similarity coefficient,and the experts＇ weights are determined according to the result of classification,the entropy of collating vectors and the judgment matrix consistency.Finally,a numerical example shows that the method is feasible and effective.
基金Shanghai Leading Academic Discipline Project (T0502)Shanghai Municipal Educational Commission Project (05EZ32).
文摘With the fast growth of Chinese economic, more and more capital will be invested in environmental projects. How to select the environmental investment projects （alternatives） for obtaining the best environmental quality and economic benefits is an important problem for the decision makers. The purpose of this paper is to develop a decision-making model to rank a finite number of alternatives with several and sometimes conflicting criteria. A model for ranking the projects of municipal sewage treatment plants is proposed by using exports＇ information and the data of the real projects. And, the ranking result is given based on the PROMETHEE method. Furthermore, by means of the concept of the weight stability intervals （WSI）, the sensitivity of the ranking results to the size of criteria values and the change of weights value of criteria are discussed. The result shows that some criteria, such as “proportion of benefit to project cost”, will influence the ranking result of alternatives very strong while others not. The influence are not only from the value of criterion but also from the changing the weight of criterion. So, some criteria such as “proportion of benefit to project cost” are key critera for ranking the projects. Decision makers must be cautious to them.
基金supported by the Education Science Fund of the Military Science Institute of Beijing,China(2015JY320)
文摘In military service joint operations, when there are more operational forces, more multifarious materials are consumed, the support is more complex and fuzzy, the deployment of personnel is more rapid, and the support provided by wartime military material support powers can be more effective. When the principles,requirements, influencing factors and goals of military material support forces are deployed in wartime, an evaluation indicator system is established. Thus, a new combined empowerment method based on an analytic hierarchy process（AHP） is developed to calculate the subjective weights, and the rough entropy method is used to calculate the objective weights. Combination weights can be obtained by calculating the weight preference coefficient error, which is determined by combining the cooperative game method and the minimum deviation into objectives. This approach can determine the grey relation projection coefficient and synthesize the measure scheme superiority to finally optimize the deployment plan using the grey relation projection decision-making method. The results show that the method is feasible and effective;it can provide a more scientific and practical decision-making basis for the military material support power deployment in wartime.
基金supported by the National Natural Science Foundation of China(71503103)the Humanities and Social Sciences of Education Ministry(17YJC640233)+4 种基金the Jiangsu Province University Philosophy and Social Sciences for Key Research Program(2017ZDIXM034)the Soft Science Foundation of Jiangsu Province(BR2018005)the Natural Science Foundation of Jiangsu Province(BK20150157)the Fundamental Research Funds for the Central Universities(2019JDZD06)the Key Soft Science Foundation of Wuxi(KX-18-B01)
文摘For the problems of the consistency ranking of the group decision-making scheme,from the view of group negotiation and system coordination,the grey incidence analysis and Nash bargaining model are used to establish a consistency group decision-making method.First,the concepts of the consensus partial decision-making program and the consensus overall ideal decision-making program are defined,and then a multi-object optimization model is constructed based on the satisfaction maximization of group negotiation and deviation minimization of system coordination to determine the consensus partial decision-making program and the consensus overall ideal decision-making program.Moreover,the grey incidence analysis is exploited to measure the close degrees between them.Finally,a real case of the online product evaluation verifies the validity and rationality of the proposed model.
基金supported by the National Natural Science Foundation of China(71171008)
文摘The uncertainty analysis is an effective sensitivity analysis method for system model analysis and optimization. However,the existing single-factor uncertainty analysis methods are not well used in the logistic support systems with multiple decision-making factors. The multiple transfer parameters graphical evaluation and review technique（MTP-GERT） is used to model the logistic support process in consideration of two important factors, support activity time and support activity resources, which are two primary causes for the logistic support process uncertainty. On this basis,a global sensitivity analysis（GSA） method based on covariance is designed to analyze the logistic support process uncertainty. The aircraft support process is selected as a case application which illustrates the validity of the proposed method to analyze the support process uncertainty, and some feasible recommendations are proposed for aircraft support decision making on carrier.
基金Project(U1709211) supported by NSFC-Zhejiang Joint Fund for the Integration of Industrialization and Informatization,ChinaProject(ICT2021A15) supported by the State Key Laboratory of Industrial Control Technology,Zhejiang University,ChinaProject(TPL2019C03) supported by Open Fund of Science and Technology on Thermal Energy and Power Laboratory,China。
文摘Fault degradation prognostic, which estimates the time before a failure occurs and process breakdowns, has been recognized as a key component in maintenance strategies nowadays. Fault degradation processes are, in general,slowly varying and can be modeled by autoregressive models. However, industrial processes always show typical nonstationary nature, which may bring two challenges: how to capture fault degradation information and how to model nonstationary processes. To address the critical issues, a novel fault degradation modeling and online fault prognostic strategy is developed in this paper. First, a fault degradation-oriented slow feature analysis(FDSFA) algorithm is proposed to extract fault degradation directions along which candidate fault degradation features are extracted. The trend ability assessment is then applied to select major fault degradation features. Second, a key fault degradation factor(KFDF) is calculated to characterize the fault degradation tendency by combining major fault degradation features and their stability weighting factors. After that, a time-varying regression model with temporal smoothness regularization is established considering nonstationary characteristics. On the basis of updating strategy, an online fault prognostic model is further developed by analyzing and modeling the prediction errors. The performance of the proposed method is illustrated with a real industrial process.
文摘A comparative proteomic analysis was performed to explore the mechanism of cell elongation in developing cotton fibers.The temporal changes of global proteomes at five representative
文摘Process Capability Analysis (PCA) is a powerful too l to assess the ability of a process for manufacturing product that meets specific ations. The larger process capability index implies the higher process yield, a nd the larger process capability index also indicates the lower process expected loss. Chen et al. (2001) has applied indices C pu, C pl, and C pk for evaluating the process capability for a multi-process product wi th smaller-the-better, larger-the-better, and nominal-the-best specificati ons respectively. However, C pk cannot reasonably reflect the process expected loss. In this paper, index C pn is selected to replace C pk. Indices C pu, C pl, and C pn are used to evalu ate the entire process capability for a multi-process product with smaller-the -better, larger-the-better, and nominal-the-best specifications respectivel y. An integrated process capability index for a multi-process product is propo sed. The relationship between process capability index and the process yield is introduced. A multi-process capability analysis chart (MPCAC), reasonably rev ealing the status of process capability for the entire product, is constructed f or practical application. An evaluating procedure of the process capability for the entire product is also provided.
基金Supported by Chnia Agriculture Research Systemthe Scientific Research Fund of the Key Technology and Research and Development of Barley Characteristic Agricultural Products Processing(XZ201901NA04)Development and Industrialization Application of Xizang Highland Barley Baijiu(XZ202001ZY0017N)。
文摘The purpose of this study was to explore the quality of the Tibetan native hulless barley variety in depth and to evaluate the characteristics of its processing quality using ratio analysis.For this study,10 native barley varieties were chosen with the detection of 24 quality indexes in order to build a system of comprehensive evaluation.The results of the factor analysis indicated that seven common factors with an eigenvalue greater than 1 were extracted,cumulatively accounting for 96.21%of the total variance.The first common factor,including ASP,GLU,SER,GLY,ARG,TYR and CYS contents,accounted for 33.82% of the variance.The second common factor,including ash,the total starch,soluble fiber,VB_(3),Cu,Mn,Na and beta-glucan contents,accounted for 19.46%of the variance.The third common factor,including the total dietary fiber,α-VE,K,Zn and glutelin.The fourth common factor,including B,Ba and prolamin,explained the barley starch character of the rheological property.The fifth common factor included crude fiber.The sixth and the seventh common factors did not account for a substantial amount of variance.According to the comprehensive evaluation model,the score consequence was as the following:Zangqing25>Pengnaigabu>Lhasa changhei>2004Qing21>Lhasa duanbai>Liangamu>Zhikonggaxia>lianmubai>Jiangreejiu>Longzihei.
文摘In order to put forward countermeasures and suggestions of reform and innovation on the supply system of preschool education in China,the current change process of China’s preschool education supply system is analyzed using the historical analysis method.It is believed that there are still some outstanding problems in the supply system of the preschool education in China at present.According to the theory of supply and demand balance of economics and institutional change theory of new institutional economics,the future trend of China’s preschool education supply system is also analyzed.
文摘To evaluate the effectiveness of weapon systems, the advantages and disadvantages of grey relational analysis and TOPSIS for multiattribute decision-making is pointed out, and an effectiveness evaluation model of weapon systems by combining grey relational analysis and TOPSIS is proposed. The model aggregates the grey relational grade and the distance to a new integrated closeness and reflects not only the trend but also the situation of the alternative. The example illuminates that the model is effective for the effectiveness evaluation of weapon systems.
文摘The wheel brake system safety is a complex problem which refers to its technical state, operating environment, human factors, etc., in aircraft landing taxiing process. Usually, professors consider system safety with traditional probability techniques based on the linear chain of events. However, it could not comprehensively analyze system safety problems, especially in operating environment, interaction of subsystems, and human factors. Thus,we consider system safety as a control problem based on the system-theoretic accident model, the processes(STAMP) model and the system theoretic process analysis(STPA) technique to compensate the deficiency of traditional techniques. Meanwhile,system safety simulation is considered as system control simulation, and Monte Carlo methods are used which consider the range of uncertain parameters and operation deviation to quantitatively study system safety influence factors in control simulation. Firstly,we construct the STAMP model and STPA feedback control loop of the wheel brake system based on the system functional requirement. Then four unsafe control actions are identified, and causes of them are analyzed. Finally, we construct the Monte Carlo simulation model to analyze different scenarios under disturbance. The results provide a basis for choosing corresponding process model variables in constructing the context table and show that appropriate brake strategies could prevent hazards in aircraft landing taxiing.
基金Projects(61273163,61325015,61304121)supported by the National Natural Science Foundation of China
文摘A new modeling and monitoring approach for multi-mode processes is proposed.The method of similarity measure(SM) and kernel principal component analysis(KPCA) are integrated to construct SM-KPCA monitoring scheme,where SM method serves as the separation of common subspace and specific subspace.Compared with the traditional methods,the main contributions of this work are:1) SM consisted of two measures of distance and angle to accommodate process characters.The different monitoring effect involves putting on the different weight,which would simplify the monitoring model structure and enhance its reliability and robustness.2) The proposed method can be used to find faults by the common space and judge which mode the fault belongs to by the specific subspace.Results of algorithm analysis and fault detection experiments indicate the validity and practicability of the presented method.
基金Projects(50574091,50774084) supported by the National Natural Science Foundation of China
文摘A feasible method to improve the reliability and processing efficiency of large vibrating screen via the application of an elastic screen surface with multiple attached substructures （ESSMAS） was proposed. In the ESSMAS, every screen rod, with ends embedded into elastomer, is coupled to the main screen structure in a relatively flexible manner. The theoretical analysis was conducted, which consists of establishing dynamic model promoted from the fuzzy structure theory as well as calculating for the equivalent stiffness of each attached structure. According to the numerical simulation using the NEWMARK-fl integration method, this assembling pattern significantly leads to the screen surface/rod having larger vibration intensity than that of the corresponding position on screen structure, which specifically, with an averaged acceleration amplitude increasing ratio of 11.37% in theoretical analysis and 20.27% in experimental test. The experimental results, within a tolerant error, also confirm the established model and demonstrate the feasibility of ESSMAS.
基金This work is supported by Openning Laboratory of Complex System Control,Institute of Automation, Academia Sinica
文摘In this paper, reliability of some typical non-Markov repairable systems, including series systems, m-out-of- n or majority vote systems, and n : m cross-strapping standby redundant systems with general repair-time distribution, are studied by applying the generalized Markov renewal process (GMRP). The stochastic behavior of the typical systems is analyzed here. Formulas for mean time to first system failure, MTBF, MTTR, and availability are then developed.
基金The University of Ilorin,Nigeria financially supported this research through scholarship grant from Tertiary Education Trust Fund
文摘Numerous innovative heat recovery-to-power technologies have been resourcefully and technologically exploited to bridge the growing gap between energy needs and its sustainable and affordable supply.Among them,the proposed trilateral-cycle(TLC) power system exhibits high thermodynamic efficiency during heat recovery-to-power from low-to-medium temperature heat sources.The TLCs are proposed and analysed using n-pentane as working fluid for waste heat recovery-to-power generation from low-grade heat source to evaluate the thermodynamic efficiency of the cycles.Four different single stage TLC configurations with distinct working principles are modelled thermodynamically using engineering equation solver.Based on the thermodynamic framework,thermodynamic performance simulation and efficiency analysis of the cycles as well as the exergy efficiencies of the heating and condensing processes are carried out and compared in their efficiency.The results show that the simple TLC,recuperated TLC,reheat TLC and regenerative TLC operating at subcritical conditions with cycle high temperature of 473 K can attain thermal efficiencies of 21.97%,23.91%,22.07% and 22.9%,respectively.The recuperated TLC attains the highest thermodynamic efficiency at the cycle high temperature because of its lowest exergy destruction rates in the heat exchanger and condenser.The efficiency analysis carried out would assist in guiding thermodynamic process development and thermal integration of the proposed cycles.
