High-energy density lithium-ion batteries(LIBs)with layered high-nickel oxide cathodes(LiNi_(x)Co_(y)Mn_(1-x-y)O_(2),x≥0.8)show great promise in consumer electronics and vehicular applications.However,LiNi_(x)Co_(y)M...High-energy density lithium-ion batteries(LIBs)with layered high-nickel oxide cathodes(LiNi_(x)Co_(y)Mn_(1-x-y)O_(2),x≥0.8)show great promise in consumer electronics and vehicular applications.However,LiNi_(x)Co_(y)Mn_(1-x-y)O_(2)faces challenges related to capacity decay caused by residual alkalis owing to high sensitivity to air.To address this issue,we propose a hazardous substances upcycling method that fundamentally mitigates alkali content and concurrently induces the emergence of an anti-air-sensitive layer on the cathode surface.Through the neutralization of polyacrylic acid(PAA)with residual alkalis and then coupling it with 3-aminopropyl triethoxysilane(KH550),a stable and ion-conductive cross-linked polymer layer is in situ integrated into the LiNi_(0.89)Co_(0.06)Mn_(0.05)O_(2)(NCM)cathode.Our characterization and measurements demonstrate its effectiveness.The NCM material exhibits impressive cycling performance,retaining 88.4%of its capacity after 200 cycles at 5 C and achieving an extraordinary specific capacity of 170.0 mA h g^(-1) at 10 C.Importantly,this layer on the NCM efficiently suppresses unfavorable phase transitions,severe electrolyte degradation,and CO_(2)gas evolution,while maintaining commendable resistance to air exposure.This surface modification strategy shows widespread potential for creating air-stable LiNi_(x)Co_(y)Mn_(1-x-y)O_(2)cathodes,thereby advancing high-performance LIBs.展开更多
Viologens known as a kind of promising negolyte materials for aqueous organic redox flow batteries,face a critical stability challenge due to the S_N2 nucleophilic attack by hydroxide ions(OH-)during the battery cycli...Viologens known as a kind of promising negolyte materials for aqueous organic redox flow batteries,face a critical stability challenge due to the S_N2 nucleophilic attack by hydroxide ions(OH-)during the battery cycling.In this work,a N-cyclic quaternary ammonium-grafted viologen molecule,viz.1,1'-bis(4,4'-dime thylpiperidiniumyl)-4,4'-bipyridinium tetrachloride((DBPPy)Cl_(4)),is developed by the molecular engineering strategy.The obtained(DBPPy)Cl_(4) molecule shows a decent solubility of 1.84 M and a redox potential of-0.52 V vs.Ag/AgCl,Experimental and theoretical results reveal that the grafted N-cyclic quaternary ammonium groups act as the steric hindrance to prevent nucleophilic attack by OH~-,increasing the alkali resistance of the electroactive molecule.The symmetrical battery with 0.50 M(DBPPy)Cl4shows negligible decay during the 13-day cycling test.As demonstration,the flow battery utilizing 1.0 M(DBPPy)Cl_(4) as the negolyte and 1-(1-oxyl-2,2',6,6'-tetramethylpiperidin-4-yl)-1'-(3-(trimethylammonio)propyl)-4,4'-bipyridinium trichloride as the posolyte exhibits a high capacity retention rate of 99.99%per cycle at 60 mA cm^(-2).展开更多
Hypercalcemic crises as a result of milk-alkali syndrome(MAS)are an uncommon cause of altered mental status and acute renal failure in the emergency department.Although it is uncommonly reported in the emergency medic...Hypercalcemic crises as a result of milk-alkali syndrome(MAS)are an uncommon cause of altered mental status and acute renal failure in the emergency department.Although it is uncommonly reported in the emergency medicine literature,emergency physicians should be aware of this syndrome due to significant morbidity and mortality if left undiagnosed.展开更多
The two kinds of rigid polyurethane （PU） foams were prepared with respectively adding the refined alkali lignin and alkali lignin modified by 3-chloro-1,2-epoxypropane to be instead of 15% of the polyether glycol in...The two kinds of rigid polyurethane （PU） foams were prepared with respectively adding the refined alkali lignin and alkali lignin modified by 3-chloro-1,2-epoxypropane to be instead of 15% of the polyether glycol in weight. The indexes of mechanical performance, apparent density, thermal stability and aging resistance were separately tested for the prepared PU foams. The results show that the mechanical property, thermal insulation and thermal stability for PU foam with modified alkali lignin are excellent among two kinds of PU foams and control samples. The additions of the refined alkali lignin and modified alkali lignin to PU foam have little effect on the natural aging or heat aging resistance except for decreasing hot alkali resistance apparently. Additionally, the thermal conductivity of modified alkali lignin PU foam is lowest among two kinds of PU foams and control samples. The alkali lignin PU foam modified by 3-chloro-1,2-epoxypropane could be applied in the heat preservation field.展开更多
The occurrence modes of alkali and alkaline-earth metals（AAEMs） in coal relate to their release behavior and ash formation during combustion. To better understand the transformation of AAEMs,the release behavior of ...The occurrence modes of alkali and alkaline-earth metals（AAEMs） in coal relate to their release behavior and ash formation during combustion. To better understand the transformation of AAEMs,the release behavior of water-soluble,HCl-soluble,HCl-insoluble AAEMs during Shenmu coal（SM coal） oxy-fuel combustion in the presence of SO2 and H2O in a drop-tube reactor was investigated through serial dissolution using H2O and HCl solutions. The results show that the release rates of AAEMs increase with an increase in temperature under the three atmospheres studied. The high release rates of Mg and Ca from SM coal are dependent on the high content of soluble Mg and Ca in SM coal. SO2 inhibits the release rates of AAEMs,while H2O promotes them. The effects of SO2 and H2O on the Na and K species are more evident than those on Mg and Ca species. All three types of AAEMs in coal can volatilize in the gas phase during coal combustion. The W-type AAEMs release excessively,whereas the release rates of I-type AAEMs are relatively lower. Different types of AAEM may interconvert through different pathways under certain conditions. Both SO2 and H2O promote the transformation reactions. The effect of SO2 was related to sulfate formation and the promotion by H2O occurs because of a decrease in the melting point of the solid as well as the reaction of H2O.展开更多
The two kinds of rigid polyurethane(PU) foams were prepared with respectively adding the refined alkali lignin and alkali lignin modified by 3-chloro-1,2-epoxypropane to be instead of 15% of the polyether glycol in we...The two kinds of rigid polyurethane(PU) foams were prepared with respectively adding the refined alkali lignin and alkali lignin modified by 3-chloro-1,2-epoxypropane to be instead of 15% of the polyether glycol in weight.The indexes of mechanical performance, apparent density, thermal stability and aging resistance were separately tested for the prepared PU foams.The results show that the mechanical property, thermal insulation and thermal stability for PU foam with modified alkali lignin are excellent among two kinds of PU foams and control samples.The additions of the refined alkali lignin and modified alkali lignin to PU foam have little effect on the natural aging or heat aging resistance except for decreasing hot alkali resistance apparently.Additionally, the thermal conductivity of modified alkali lignin PU foam is lowest among two kinds of PU foams and control samples.The alkali lignin PU foam modified by 3-chloro-1,2-epoxypropane could be applied in the heat preservation field.展开更多
Alkali metal hydroxide and hydride composite systems contain both protic （H bonded with O） and hydridic hydrogen. The interaction of these two types of hydrides produces hydrogen. The enthalpy of dehydrogenation inc...Alkali metal hydroxide and hydride composite systems contain both protic （H bonded with O） and hydridic hydrogen. The interaction of these two types of hydrides produces hydrogen. The enthalpy of dehydrogenation increased with the increase of atomic number of alkali metals, i.e., -23 kJ/molnz for LiOH-LiH, 55.34 kJ/moln： for NaOH-NaH and 222 kJ/molH2 for KOH-KH. These thermodynamic calculation results were consistent with our experimental results. H2 was released from LiOH-LiH system during ball milling. The dehydrogenation temperature of NaOH-NaH system was about 150 ℃; whereas KOH and KH did not interact with each other during the heating process. Instead, KH decomposed by itself. In these three systems, NaOH-NaH was the only reversible hydrogen storage system, the enthalpy of dehydrogenation was about 55.65 kJ/molHz, and the corresponding entropy was ca. 101.23 J/（molHz .K）, so the temperature for releasing 1.0 bar H2 was as high as 518 ℃, showing unfavorable thermodynamic properties. The activation energy for hydrogen desorption of NaOH-NaH was found to be 57.87 kJ/mol, showing good kinetic properties.展开更多
Rechargeable alkali metal-air batteries are considered as the most promising candidate for the power source of electric vehicles(EVs) due to their high energy density. However, the practical application of metal-air b...Rechargeable alkali metal-air batteries are considered as the most promising candidate for the power source of electric vehicles(EVs) due to their high energy density. However, the practical application of metal-air batteries is still challenging. In the past decade, many strategies have been purposed and explored, which promoted the development of metal-air batteries. The reaction mechanisms have been gradually clarified and catalysts have been rationally designed for air cathodes. In this review, we summarize the recent development of alkali metal-air batteries from four parts: metal anodes, electrolytes, air cathodes and reactant gases, wherein we highlight the important achievement in this filed. Finally problems and prospective are discussed towards the future development of alkali metal-air batteries.展开更多
Metal-organic frameworks （MOFs） have attracted much attention as adsorbents for the separation of CO2 from flue gas or natural gas. Here, a typical metal-organic framework HKUST-I（also named Cu-BTC or MOF-199） was...Metal-organic frameworks （MOFs） have attracted much attention as adsorbents for the separation of CO2 from flue gas or natural gas. Here, a typical metal-organic framework HKUST-I（also named Cu-BTC or MOF-199） was chemically reduced by doping it with alkali metals （Li, Na and K） and they were further used to investigate their CO2 adsorption capacities. The structural information, surface chemistry and thermal behavior of the prepared adsorbent samples were characterized by X-ray powder diffraction （XRD）, thermo-gravimetric analysis （TGA） and nitrogen adsorption-desorption isotherm analysis. The results showed that the CO2 storage capacity of HKUST-1 doped with moderate quantities of Li＋, Na＋ and K＋, individually, was greater than that of unmodified HKUST-1. The highest CO2 adsorption uptake of 8.64 mmol/g was obtained with 1K-HKUST-1, and it was ca. 11% increase in adsorption capacity at 298 K and 18 bar as compared with HKUST- 1. Moreover, adsorption tests showed that HKUST-1 and 1K-HKUST-1 displayed much higher adsorption capacities of CO2 than those of N2. Finally, the adsorption/desorption cycle experiment revealed that the adsorption performance of 1K-HKUST-1 was fairly stable, without obvious deterioration in the adsorption capacity of CO2 after 10 cycles.展开更多
The oil/water interfacial properties of crude oil emulsions formed by alkaline/surfactant/ polymer（ASP） flooding in the Daqing Oilfield were investigated in this paper by the measurement of interfacial tension,inter...The oil/water interfacial properties of crude oil emulsions formed by alkaline/surfactant/ polymer（ASP） flooding in the Daqing Oilfield were investigated in this paper by the measurement of interfacial tension,interfacial shear viscosity and Zeta potential of the oil/water system.The result showed that both NaOH and Na_2CO_3 could react with acid substances in the crude oil to produce interfacially active components,which are adsorbed on the interfaces between the aqueous phase and oil phase, resulting in a decrease of the interfacial tension,negatively charging the surface of oil droplets,but making little change in the interfacial shear viscosity.For the same ionic strength of NaOH and Na_2CO_3, the interfacial tension of NaOH solution-crude oil system is lower,but the interfacial shear viscosity of NaOH solution-crude oil system is higher,than that of Na_2CO_3 solution-crude oil system.The negative value of the Zeta potential on the surface of the oil droplets is large.Accordingly,the O/W emulsion of NaOH solution-crude oil system is more stable than that of Na_2CO_3 solution-crude oil system.展开更多
Alkali salts of tungsten based heteropoly acids with different central atom such as P, Si and Co were prepared and evaluated for transes- terification of both edible and non-edible oils to their corresponding fatty ac...Alkali salts of tungsten based heteropoly acids with different central atom such as P, Si and Co were prepared and evaluated for transes- terification of both edible and non-edible oils to their corresponding fatty acid methyl esters. The catalyst of sodium salt of tungstic acid with Co as central atom （Na5CoW12O40） showed optimum activity towards transesterification compared with other heteropoly tungstates. The catalysts activities were correlated with the observed physico-chemical characteristics derived from FT-infrared （FT-IR）, X-ray diffraction （XRD）, temperature-programmed desorption of ammonia （NH3-TPD） and carbon dioxide （CO2-TPD）. The Na5CoW12O40 catalyst exhibiting high activity even at 65 ℃ is due to the presence of strong acidic as well as basic sites. The disclosed catalyst is tolerable towards water and free fatty acids present in the oils. The influence of catalyst loading, reaction time and reaction temperature is studied to optimize the reaction parameters.展开更多
Surface properties （viz. surface area, basicity/base strength distribution, and crystal phases） of alkali metal doped CaO （alkali metal/Ca= 0.1 and 0.4） catalysts and their catalytic activity/selectivity in oxidat...Surface properties （viz. surface area, basicity/base strength distribution, and crystal phases） of alkali metal doped CaO （alkali metal/Ca= 0.1 and 0.4） catalysts and their catalytic activity/selectivity in oxidative coupling of methane （OCM） to higher hydrocarbons at different reaction conditions （viz. temperature, 700 and 750 ℃; CH4/O2 ratio, 4.0 and 8.0 and space velocity, 5140-20550 cm^3 ·g^-1·h^-1） have been investigated. The influence of catalyst calcination temperature on the activity/selectivity has also been investigated. The surface properties （viz. surface area, basicity/base strength distribution） and catalytic activity/selectivity of the alkali metal doped CaO catalysts are strongly influenced by the alkali metal promoter and its concentration in the alkali metal doped CaO catalysts. An addition of alkali metal promoter to CaO results in a large decrease in the surface area but a large increase in the surface basicity （strong basic sites） and the C2＋ selectivity and yield of the catalysts in the OCM process. The activity and selectivity are strongly influenced by the catalyst calcination temperature. No direct relationship between surface basicity and catalytic activity/selectivity has been observed. Among the alkali metal doped CaO catalysts, Na-CaO （Na/Ca = 0.1, before calcination） catalyst （calcined at 750 ℃）, showed best performance （C2＋ selectivity of 68.8% with 24.7% methane conversion）, whereas the poorest performance was shown by the Rb-CaO catalyst in the OCM process.展开更多
This research investigates the mechanism of increased salinity tolerance of ectomycorrhizal fungiinoculated P. sylvestris var. mongolica to provide a theoretical basis for the application of the fungus in saline soils...This research investigates the mechanism of increased salinity tolerance of ectomycorrhizal fungiinoculated P. sylvestris var. mongolica to provide a theoretical basis for the application of the fungus in saline soils.Growth effects due to inoculation of seedlings with Suillus luteus(a symbiotic ectomycorrhizal fungus), were determined in four kinds of saline–alkali soils. Growth and physiological indicators, including photosynthetic characteristics, plant height, biomass, photosynthetic pigments,catalase(CAT) and superoxide dismutase(SOD) enzyme levels, and malondialdehyde(MDA), an organic marker for oxidative stress, and soluble protein levels were determined. Mycorrhizal colonization rate decreased with increasing saline–alkalinity and growth of inoculated seedlings was significantly enhanced. Biomass and chlorophyll contents also increased significantly. SOD and CAT activities were higher than in non-inoculated seedlings. However, MDA content decreased in inoculatedseedlings. Soluble protein content did not increase significantly. Inoculation with a symbiotic ectomycorrhizal fungus could enhance the saline–alkali tolerance of P. sylvestris var. mongolica. Growth and physiological performance of inoculated seedlings were significantly better than that of uninoculated seedlings. The results indicate that inoculated P. sylvestris var. mongolica seedlings may be useful in the improvement of saline–alkali lands.展开更多
ZSM-48 zeolites with various Si/Al ratios were hydrothermally synthesized in the H;N（CH;）;NH;（HDA）-containing media. The obtained samples were highly crystallized with minor mixed phases as evidenced by X-ray powd...ZSM-48 zeolites with various Si/Al ratios were hydrothermally synthesized in the H;N（CH;）;NH;（HDA）-containing media. The obtained samples were highly crystallized with minor mixed phases as evidenced by X-ray powder diffraction（XRD）. The alkaline treated ZSM-48 zeolites maintained its structure under different concentrations of Na OH aqueous solution. Micropores remained unchanged while mesopores with wide pore size distribution formed after the alkaline treatment. The surface area increased from 228 to 288 m;/g. The Br?nsted acid sites had little alteration while an obvious increase of Lewis acid sites was observed. The hydroisomerization of hexadecane was performed as the model reaction to test the effects of the alkali treatment. The conversion of hexadecane had almost no change, which was attributed to the preservation of the Br?nsted acid sites. While high selectivity to iso-hexadecane with an improved iso to normal ratio of alkanes was due to the mesopore formation and improved diffusivity.展开更多
The effect of active species present in crude oil on the interfacial tension （IFT） behavior of alkali/synthetic surfactants/crude oil systems was studied. The system consisted of heavy alkyl benzene sulfonate, sodiu...The effect of active species present in crude oil on the interfacial tension （IFT） behavior of alkali/synthetic surfactants/crude oil systems was studied. The system consisted of heavy alkyl benzene sulfonate, sodium chloride, sodium hydrate and Daqing crude oil. Experimental results indicated that active species would diffuse from oil/aqueous interface to aqueous phase and finally an equilibrium could be reached in the system with increasing contact time. Moreover, the minimum IFT and equilibrium IFT values increased with increasing contact time and a linear relationship existed between dynamic IFT and f^-1/2 when IFT value approaching the minimum and after the minimum IFT was reached. This indicated that the dynamic IFT-time behavior was diffusion controlled. The oil and aqueous phases were analyzed by infrared （IR） spectroscopy. IR spectra of oil and aqueous phases illustrated that the content of active species in the oil phase decreased, but the content of active species in the aqueous phase increased after alkali reacted with crude oil. This indicated that the active species present in oil played an important role in reducing IFT.展开更多
A long-term field study was initiated during 1995 at Central Soil Salinity Research Institute, Regional Research Station, Lucknow （26047＇58＂ N and 80°46＇24＂ E） to analyze the effect of agroforestry systems ...A long-term field study was initiated during 1995 at Central Soil Salinity Research Institute, Regional Research Station, Lucknow （26047＇58＂ N and 80°46＇24＂ E） to analyze the effect of agroforestry systems on amelioration of alkali soils. Three agroforestry systems （pas- toral, silvipastoral and silvicultural） were compared with the control where no agroforestry system was introduced. Tree-based silvicultural and silvipastoral systems were characterized by tree species Prosopis juliflora and Acacia nilotica along with grass species Leptochloafusca, Panicum maximum, Trifolium alexandrium and Chloris gayana. Growth of ten-year-old Prosopis juliflora and Acacia nilotica planted in combi- nation with grasses was significantly higher over the silviculture system with the same species. Tree biomass yields of P. juliflora （77.20 t·ha-1） and A. nilotica （63.20 t·ha-1） planted under silvipastoral system were significantly higher than the sole plantation of （64.50 t·ha-1 and 52.75 t·ha-1）. Fodder yield under the pastoral system was significantly higher than the silvipastoral system during initial years but it was at par with that of silvipastoral systems after eight years of plantation. The microbial biomass carbon in the soils of silvipastoral systems was significantly higher than in soils under sole plantation of trees and control systems. The Prosopis-based silvipastoral system proved more effective in reduc- ing soil pH, displacing Na＋ from the exchange complex, increasing or- ganic carbon and available N, P and K. Improvement in soil physical properties such as bulk density, porosity, soil moisture and infiltration rate was higher in the Prosopis-based silvipastoral system than in the silviculture system or control On the basis of biomass production and improvement in soil health due to tree ＋ grass systems, silvipastoral agroforestry system could be adopted for sustainable reclamation ofhighly alkali soils.展开更多
EAB zeolite was successfully prepared and applied to selective adsorption of Li^(+),Na^(+)and K^(+)ions.The physical and chemical properties of the adsorbent were characterized by X-ray diffraction(XRD),X-ray fluoresc...EAB zeolite was successfully prepared and applied to selective adsorption of Li^(+),Na^(+)and K^(+)ions.The physical and chemical properties of the adsorbent were characterized by X-ray diffraction(XRD),X-ray fluorescence(XRF),scanning electron microscope(SEM)and thermogravimetry(TG)methods.The ion exchange behaviours for Li^(+),Na^(+)and K^(+)ions in monomcomponent and multicomponent solutions were studied.In independent ion exchange,the ion exchange capacities ratiosα(/Na/Li)andα(K/Li)were 3.8 and 6.2,respectively.In competitive ion exchange,the selectivitiesβ(Na/Li)andβ(K/Li)increased with the initial concentrations and reached 409 and 992 when the initial concentrations was 100 mmol/L.The thermodynamic study results showed that Gibbs free energy change(ΔGΘ)of ion exchange reaction between Li-EAB and K^(+)was-34.96 kJ/mol,indicating that ion exchange of K^(+)ions was more energetically favourable than Li^(+)ions.The calculation results showed that the energy barriers of ion exchange increased in the order K^(+)Na^(+)<Li^(+).The study shows that EAB zeolite is potential to be used in the separation of alkali ions.展开更多
The electronic structures and field emission properties of capped CNT55 systems with or without alkali metal atom adsorption were systematically investigated by density functional theory calculation.The results indica...The electronic structures and field emission properties of capped CNT55 systems with or without alkali metal atom adsorption were systematically investigated by density functional theory calculation.The results indicate that the adsorption of alkali metal on the center site of a CNT tip is energetically favorable.In addition,the adsorption energies increase with the introduction of the electric field.The excessive negative charges on CNT tips make electron emittance much easier and result in a decrease in work function.Furthermore,the inducing effect by positively charged alkali metal atoms can be reasonably considered as the dominant reason for the improvement in field emission properties.展开更多
This study aimed to modify isolated and extracted peanut protein with hot alkali to study the impact of pH,heating temperature,processing time and other alkali liquor conditions on the molecular structure of the peanu...This study aimed to modify isolated and extracted peanut protein with hot alkali to study the impact of pH,heating temperature,processing time and other alkali liquor conditions on the molecular structure of the peanut.Curcumin was loaded in modified peanut protein.The results of the study are as follows:Within the alkaline range of 8<pH<12,the percentage of amino acid residue(AAR)and-turns first increased and then decreased with the increasing pH,and the percentage of AAR reached a maximum 5.21±0.33%when the pH was 11(p<0.01).The percentage of˛-helices andβ-sheets gradually decreased with increasing pH,while that of random coils gradually increased with increasing pH,reaching a maximum 11.24±0.87%when the pH was 11(p<0.05).Within the range of the heating temperature 75℃<T<95℃,the percentage of random coils andβ-sheets gradually increased with increasing heating temperature,while that of-helices and AAR gradually decreased with increasing heating temperature;they remained unchanged when the heating temperature was 90℃,and then decreased to(10.41±1.18%;p<0.01)and(4.02±2.12%;p<0.01),respectively.Within the range of 5 min<t<20 min,the percentage of random coils and AAR gradually increased with increasing heating time,while the percentage ofα-helices decreased from 11.83±1.04%to 10.75±2.34%with increased heating time(p<0.01).The optimum conditions for hot alkali modification of peanut protein as followed:heating temperature of 90℃,heating time of 20 min and a pH of alkali liquor of 11.Under these optimum conditions,the embedding rate of curcumin by the modified protein can reach 88.32±1.29%.展开更多
HZSM-5 zeolites with the micro-mesopore hierarchical porosity have been prepared by the post-synthesis of alkali-treatment, and their thermal and hydrothermal stabilities were studied using DTA, XRD, and NH3-TPD chara...HZSM-5 zeolites with the micro-mesopore hierarchical porosity have been prepared by the post-synthesis of alkali-treatment, and their thermal and hydrothermal stabilities were studied using DTA, XRD, and NH3-TPD characterization techniques. Compared to the unmodified zeolite, the thermal and hydrothermal stabilities of the alkali-treated ZSM-5 zeolites were slightly deteriorated because of the introduction of mesopores caused by the desilication. Nevertheless, the alkali-treated zeolite framework could be maintained until the temperature increased to 1175 ℃.展开更多
基金supported by the National Natural Science Foundation of China(52162030)the Yunnan Major Scientific and Technological Projects(202202AG050003)+4 种基金the Key Research and Development Program of Yunnan Province(202103AA080019)the Scientific Research Foundation of Kunming University of Science and Technology(20220122)the Graduate Student Top Innovative Talent Program of Kunming University of Science and Technology(CA23107M139A)the Analysis and Testing Foundation of Kunming University of Science and Technology(2023T20220122)the Shenzhen Science and Technology Program(KCXST20221021111201003)。
文摘High-energy density lithium-ion batteries(LIBs)with layered high-nickel oxide cathodes(LiNi_(x)Co_(y)Mn_(1-x-y)O_(2),x≥0.8)show great promise in consumer electronics and vehicular applications.However,LiNi_(x)Co_(y)Mn_(1-x-y)O_(2)faces challenges related to capacity decay caused by residual alkalis owing to high sensitivity to air.To address this issue,we propose a hazardous substances upcycling method that fundamentally mitigates alkali content and concurrently induces the emergence of an anti-air-sensitive layer on the cathode surface.Through the neutralization of polyacrylic acid(PAA)with residual alkalis and then coupling it with 3-aminopropyl triethoxysilane(KH550),a stable and ion-conductive cross-linked polymer layer is in situ integrated into the LiNi_(0.89)Co_(0.06)Mn_(0.05)O_(2)(NCM)cathode.Our characterization and measurements demonstrate its effectiveness.The NCM material exhibits impressive cycling performance,retaining 88.4%of its capacity after 200 cycles at 5 C and achieving an extraordinary specific capacity of 170.0 mA h g^(-1) at 10 C.Importantly,this layer on the NCM efficiently suppresses unfavorable phase transitions,severe electrolyte degradation,and CO_(2)gas evolution,while maintaining commendable resistance to air exposure.This surface modification strategy shows widespread potential for creating air-stable LiNi_(x)Co_(y)Mn_(1-x-y)O_(2)cathodes,thereby advancing high-performance LIBs.
基金jointly supported by the Guangdong Major Project of Basic and Applied Basic Research (2023B0303000002)National Natural Science Foundation of China (22178126,22325802,U22A20417,22208110)+3 种基金Guangdong Basic and Applied Basic Research Foundation (2023B1515120005)Science and Technology Program of Guangzhou (2023B03J1281,2023A04J1357)China Postdoctoral Science Foundation (2023T160223)the State Key Laboratory of Pulp and Paper Engineering (2023ZD03)。
文摘Viologens known as a kind of promising negolyte materials for aqueous organic redox flow batteries,face a critical stability challenge due to the S_N2 nucleophilic attack by hydroxide ions(OH-)during the battery cycling.In this work,a N-cyclic quaternary ammonium-grafted viologen molecule,viz.1,1'-bis(4,4'-dime thylpiperidiniumyl)-4,4'-bipyridinium tetrachloride((DBPPy)Cl_(4)),is developed by the molecular engineering strategy.The obtained(DBPPy)Cl_(4) molecule shows a decent solubility of 1.84 M and a redox potential of-0.52 V vs.Ag/AgCl,Experimental and theoretical results reveal that the grafted N-cyclic quaternary ammonium groups act as the steric hindrance to prevent nucleophilic attack by OH~-,increasing the alkali resistance of the electroactive molecule.The symmetrical battery with 0.50 M(DBPPy)Cl4shows negligible decay during the 13-day cycling test.As demonstration,the flow battery utilizing 1.0 M(DBPPy)Cl_(4) as the negolyte and 1-(1-oxyl-2,2',6,6'-tetramethylpiperidin-4-yl)-1'-(3-(trimethylammonio)propyl)-4,4'-bipyridinium trichloride as the posolyte exhibits a high capacity retention rate of 99.99%per cycle at 60 mA cm^(-2).
文摘Hypercalcemic crises as a result of milk-alkali syndrome(MAS)are an uncommon cause of altered mental status and acute renal failure in the emergency department.Although it is uncommonly reported in the emergency medicine literature,emergency physicians should be aware of this syndrome due to significant morbidity and mortality if left undiagnosed.
文摘The two kinds of rigid polyurethane （PU） foams were prepared with respectively adding the refined alkali lignin and alkali lignin modified by 3-chloro-1,2-epoxypropane to be instead of 15% of the polyether glycol in weight. The indexes of mechanical performance, apparent density, thermal stability and aging resistance were separately tested for the prepared PU foams. The results show that the mechanical property, thermal insulation and thermal stability for PU foam with modified alkali lignin are excellent among two kinds of PU foams and control samples. The additions of the refined alkali lignin and modified alkali lignin to PU foam have little effect on the natural aging or heat aging resistance except for decreasing hot alkali resistance apparently. Additionally, the thermal conductivity of modified alkali lignin PU foam is lowest among two kinds of PU foams and control samples. The alkali lignin PU foam modified by 3-chloro-1,2-epoxypropane could be applied in the heat preservation field.
基金support for this research from the Natural Science Foundation of China (U1261110)the Natural Science Foundation of Shanxi Province (20130110422)the Foundation of State Key Laboratory of Coal Combustion (FSKLCC-0914)
文摘The occurrence modes of alkali and alkaline-earth metals（AAEMs） in coal relate to their release behavior and ash formation during combustion. To better understand the transformation of AAEMs,the release behavior of water-soluble,HCl-soluble,HCl-insoluble AAEMs during Shenmu coal（SM coal） oxy-fuel combustion in the presence of SO2 and H2O in a drop-tube reactor was investigated through serial dissolution using H2O and HCl solutions. The results show that the release rates of AAEMs increase with an increase in temperature under the three atmospheres studied. The high release rates of Mg and Ca from SM coal are dependent on the high content of soluble Mg and Ca in SM coal. SO2 inhibits the release rates of AAEMs,while H2O promotes them. The effects of SO2 and H2O on the Na and K species are more evident than those on Mg and Ca species. All three types of AAEMs in coal can volatilize in the gas phase during coal combustion. The W-type AAEMs release excessively,whereas the release rates of I-type AAEMs are relatively lower. Different types of AAEM may interconvert through different pathways under certain conditions. Both SO2 and H2O promote the transformation reactions. The effect of SO2 was related to sulfate formation and the promotion by H2O occurs because of a decrease in the melting point of the solid as well as the reaction of H2O.
基金The key project of "11th Five-Year Plan" in Heilongjiang Province (No. GB06B501-3)
文摘The two kinds of rigid polyurethane(PU) foams were prepared with respectively adding the refined alkali lignin and alkali lignin modified by 3-chloro-1,2-epoxypropane to be instead of 15% of the polyether glycol in weight.The indexes of mechanical performance, apparent density, thermal stability and aging resistance were separately tested for the prepared PU foams.The results show that the mechanical property, thermal insulation and thermal stability for PU foam with modified alkali lignin are excellent among two kinds of PU foams and control samples.The additions of the refined alkali lignin and modified alkali lignin to PU foam have little effect on the natural aging or heat aging resistance except for decreasing hot alkali resistance apparently.Additionally, the thermal conductivity of modified alkali lignin PU foam is lowest among two kinds of PU foams and control samples.The alkali lignin PU foam modified by 3-chloro-1,2-epoxypropane could be applied in the heat preservation field.
基金supported by the National Natural Science Foundation of China(51301161)973 Project(2010CB631304)the Project of National Natural Science Funds for Distinguished Young Scholar(51225206)
文摘Alkali metal hydroxide and hydride composite systems contain both protic （H bonded with O） and hydridic hydrogen. The interaction of these two types of hydrides produces hydrogen. The enthalpy of dehydrogenation increased with the increase of atomic number of alkali metals, i.e., -23 kJ/molnz for LiOH-LiH, 55.34 kJ/moln： for NaOH-NaH and 222 kJ/molH2 for KOH-KH. These thermodynamic calculation results were consistent with our experimental results. H2 was released from LiOH-LiH system during ball milling. The dehydrogenation temperature of NaOH-NaH system was about 150 ℃; whereas KOH and KH did not interact with each other during the heating process. Instead, KH decomposed by itself. In these three systems, NaOH-NaH was the only reversible hydrogen storage system, the enthalpy of dehydrogenation was about 55.65 kJ/molHz, and the corresponding entropy was ca. 101.23 J/（molHz .K）, so the temperature for releasing 1.0 bar H2 was as high as 518 ℃, showing unfavorable thermodynamic properties. The activation energy for hydrogen desorption of NaOH-NaH was found to be 57.87 kJ/mol, showing good kinetic properties.
基金supported by NSFC(21473094 and21421001)MOE Innovation Team(IRT13022) in China
文摘Rechargeable alkali metal-air batteries are considered as the most promising candidate for the power source of electric vehicles(EVs) due to their high energy density. However, the practical application of metal-air batteries is still challenging. In the past decade, many strategies have been purposed and explored, which promoted the development of metal-air batteries. The reaction mechanisms have been gradually clarified and catalysts have been rationally designed for air cathodes. In this review, we summarize the recent development of alkali metal-air batteries from four parts: metal anodes, electrolytes, air cathodes and reactant gases, wherein we highlight the important achievement in this filed. Finally problems and prospective are discussed towards the future development of alkali metal-air batteries.
文摘Metal-organic frameworks （MOFs） have attracted much attention as adsorbents for the separation of CO2 from flue gas or natural gas. Here, a typical metal-organic framework HKUST-I（also named Cu-BTC or MOF-199） was chemically reduced by doping it with alkali metals （Li, Na and K） and they were further used to investigate their CO2 adsorption capacities. The structural information, surface chemistry and thermal behavior of the prepared adsorbent samples were characterized by X-ray powder diffraction （XRD）, thermo-gravimetric analysis （TGA） and nitrogen adsorption-desorption isotherm analysis. The results showed that the CO2 storage capacity of HKUST-1 doped with moderate quantities of Li＋, Na＋ and K＋, individually, was greater than that of unmodified HKUST-1. The highest CO2 adsorption uptake of 8.64 mmol/g was obtained with 1K-HKUST-1, and it was ca. 11% increase in adsorption capacity at 298 K and 18 bar as compared with HKUST- 1. Moreover, adsorption tests showed that HKUST-1 and 1K-HKUST-1 displayed much higher adsorption capacities of CO2 than those of N2. Finally, the adsorption/desorption cycle experiment revealed that the adsorption performance of 1K-HKUST-1 was fairly stable, without obvious deterioration in the adsorption capacity of CO2 after 10 cycles.
基金supported by the National Basic Research Program of China (973 Program) (Grant No.2006CB705805)the National Key Scientific and Technological Project (863 Project)(Grant No.2008ZX05011)
文摘The oil/water interfacial properties of crude oil emulsions formed by alkaline/surfactant/ polymer（ASP） flooding in the Daqing Oilfield were investigated in this paper by the measurement of interfacial tension,interfacial shear viscosity and Zeta potential of the oil/water system.The result showed that both NaOH and Na_2CO_3 could react with acid substances in the crude oil to produce interfacially active components,which are adsorbed on the interfaces between the aqueous phase and oil phase, resulting in a decrease of the interfacial tension,negatively charging the surface of oil droplets,but making little change in the interfacial shear viscosity.For the same ionic strength of NaOH and Na_2CO_3, the interfacial tension of NaOH solution-crude oil system is lower,but the interfacial shear viscosity of NaOH solution-crude oil system is higher,than that of Na_2CO_3 solution-crude oil system.The negative value of the Zeta potential on the surface of the oil droplets is large.Accordingly,the O/W emulsion of NaOH solution-crude oil system is more stable than that of Na_2CO_3 solution-crude oil system.
文摘Alkali salts of tungsten based heteropoly acids with different central atom such as P, Si and Co were prepared and evaluated for transes- terification of both edible and non-edible oils to their corresponding fatty acid methyl esters. The catalyst of sodium salt of tungstic acid with Co as central atom （Na5CoW12O40） showed optimum activity towards transesterification compared with other heteropoly tungstates. The catalysts activities were correlated with the observed physico-chemical characteristics derived from FT-infrared （FT-IR）, X-ray diffraction （XRD）, temperature-programmed desorption of ammonia （NH3-TPD） and carbon dioxide （CO2-TPD）. The Na5CoW12O40 catalyst exhibiting high activity even at 65 ℃ is due to the presence of strong acidic as well as basic sites. The disclosed catalyst is tolerable towards water and free fatty acids present in the oils. The influence of catalyst loading, reaction time and reaction temperature is studied to optimize the reaction parameters.
文摘Surface properties （viz. surface area, basicity/base strength distribution, and crystal phases） of alkali metal doped CaO （alkali metal/Ca= 0.1 and 0.4） catalysts and their catalytic activity/selectivity in oxidative coupling of methane （OCM） to higher hydrocarbons at different reaction conditions （viz. temperature, 700 and 750 ℃; CH4/O2 ratio, 4.0 and 8.0 and space velocity, 5140-20550 cm^3 ·g^-1·h^-1） have been investigated. The influence of catalyst calcination temperature on the activity/selectivity has also been investigated. The surface properties （viz. surface area, basicity/base strength distribution） and catalytic activity/selectivity of the alkali metal doped CaO catalysts are strongly influenced by the alkali metal promoter and its concentration in the alkali metal doped CaO catalysts. An addition of alkali metal promoter to CaO results in a large decrease in the surface area but a large increase in the surface basicity （strong basic sites） and the C2＋ selectivity and yield of the catalysts in the OCM process. The activity and selectivity are strongly influenced by the catalyst calcination temperature. No direct relationship between surface basicity and catalytic activity/selectivity has been observed. Among the alkali metal doped CaO catalysts, Na-CaO （Na/Ca = 0.1, before calcination） catalyst （calcined at 750 ℃）, showed best performance （C2＋ selectivity of 68.8% with 24.7% methane conversion）, whereas the poorest performance was shown by the Rb-CaO catalyst in the OCM process.
基金supported by the National Natural Science Foundation of China(31800542,31670649,31200484,31170597)Natural Science Foundation of Liaoning(20180550893)。
文摘This research investigates the mechanism of increased salinity tolerance of ectomycorrhizal fungiinoculated P. sylvestris var. mongolica to provide a theoretical basis for the application of the fungus in saline soils.Growth effects due to inoculation of seedlings with Suillus luteus(a symbiotic ectomycorrhizal fungus), were determined in four kinds of saline–alkali soils. Growth and physiological indicators, including photosynthetic characteristics, plant height, biomass, photosynthetic pigments,catalase(CAT) and superoxide dismutase(SOD) enzyme levels, and malondialdehyde(MDA), an organic marker for oxidative stress, and soluble protein levels were determined. Mycorrhizal colonization rate decreased with increasing saline–alkalinity and growth of inoculated seedlings was significantly enhanced. Biomass and chlorophyll contents also increased significantly. SOD and CAT activities were higher than in non-inoculated seedlings. However, MDA content decreased in inoculatedseedlings. Soluble protein content did not increase significantly. Inoculation with a symbiotic ectomycorrhizal fungus could enhance the saline–alkali tolerance of P. sylvestris var. mongolica. Growth and physiological performance of inoculated seedlings were significantly better than that of uninoculated seedlings. The results indicate that inoculated P. sylvestris var. mongolica seedlings may be useful in the improvement of saline–alkali lands.
基金supported by the National Natural Science Foundation of China(21073023)
文摘ZSM-48 zeolites with various Si/Al ratios were hydrothermally synthesized in the H;N（CH;）;NH;（HDA）-containing media. The obtained samples were highly crystallized with minor mixed phases as evidenced by X-ray powder diffraction（XRD）. The alkaline treated ZSM-48 zeolites maintained its structure under different concentrations of Na OH aqueous solution. Micropores remained unchanged while mesopores with wide pore size distribution formed after the alkaline treatment. The surface area increased from 228 to 288 m;/g. The Br?nsted acid sites had little alteration while an obvious increase of Lewis acid sites was observed. The hydroisomerization of hexadecane was performed as the model reaction to test the effects of the alkali treatment. The conversion of hexadecane had almost no change, which was attributed to the preservation of the Br?nsted acid sites. While high selectivity to iso-hexadecane with an improved iso to normal ratio of alkanes was due to the mesopore formation and improved diffusivity.
基金National Basic Research Program of China(973 Program)
文摘The effect of active species present in crude oil on the interfacial tension （IFT） behavior of alkali/synthetic surfactants/crude oil systems was studied. The system consisted of heavy alkyl benzene sulfonate, sodium chloride, sodium hydrate and Daqing crude oil. Experimental results indicated that active species would diffuse from oil/aqueous interface to aqueous phase and finally an equilibrium could be reached in the system with increasing contact time. Moreover, the minimum IFT and equilibrium IFT values increased with increasing contact time and a linear relationship existed between dynamic IFT and f^-1/2 when IFT value approaching the minimum and after the minimum IFT was reached. This indicated that the dynamic IFT-time behavior was diffusion controlled. The oil and aqueous phases were analyzed by infrared （IR） spectroscopy. IR spectra of oil and aqueous phases illustrated that the content of active species in the oil phase decreased, but the content of active species in the aqueous phase increased after alkali reacted with crude oil. This indicated that the active species present in oil played an important role in reducing IFT.
文摘A long-term field study was initiated during 1995 at Central Soil Salinity Research Institute, Regional Research Station, Lucknow （26047＇58＂ N and 80°46＇24＂ E） to analyze the effect of agroforestry systems on amelioration of alkali soils. Three agroforestry systems （pas- toral, silvipastoral and silvicultural） were compared with the control where no agroforestry system was introduced. Tree-based silvicultural and silvipastoral systems were characterized by tree species Prosopis juliflora and Acacia nilotica along with grass species Leptochloafusca, Panicum maximum, Trifolium alexandrium and Chloris gayana. Growth of ten-year-old Prosopis juliflora and Acacia nilotica planted in combi- nation with grasses was significantly higher over the silviculture system with the same species. Tree biomass yields of P. juliflora （77.20 t·ha-1） and A. nilotica （63.20 t·ha-1） planted under silvipastoral system were significantly higher than the sole plantation of （64.50 t·ha-1 and 52.75 t·ha-1）. Fodder yield under the pastoral system was significantly higher than the silvipastoral system during initial years but it was at par with that of silvipastoral systems after eight years of plantation. The microbial biomass carbon in the soils of silvipastoral systems was significantly higher than in soils under sole plantation of trees and control systems. The Prosopis-based silvipastoral system proved more effective in reduc- ing soil pH, displacing Na＋ from the exchange complex, increasing or- ganic carbon and available N, P and K. Improvement in soil physical properties such as bulk density, porosity, soil moisture and infiltration rate was higher in the Prosopis-based silvipastoral system than in the silviculture system or control On the basis of biomass production and improvement in soil health due to tree ＋ grass systems, silvipastoral agroforestry system could be adopted for sustainable reclamation ofhighly alkali soils.
文摘EAB zeolite was successfully prepared and applied to selective adsorption of Li^(+),Na^(+)and K^(+)ions.The physical and chemical properties of the adsorbent were characterized by X-ray diffraction(XRD),X-ray fluorescence(XRF),scanning electron microscope(SEM)and thermogravimetry(TG)methods.The ion exchange behaviours for Li^(+),Na^(+)and K^(+)ions in monomcomponent and multicomponent solutions were studied.In independent ion exchange,the ion exchange capacities ratiosα(/Na/Li)andα(K/Li)were 3.8 and 6.2,respectively.In competitive ion exchange,the selectivitiesβ(Na/Li)andβ(K/Li)increased with the initial concentrations and reached 409 and 992 when the initial concentrations was 100 mmol/L.The thermodynamic study results showed that Gibbs free energy change(ΔGΘ)of ion exchange reaction between Li-EAB and K^(+)was-34.96 kJ/mol,indicating that ion exchange of K^(+)ions was more energetically favourable than Li^(+)ions.The calculation results showed that the energy barriers of ion exchange increased in the order K^(+)Na^(+)<Li^(+).The study shows that EAB zeolite is potential to be used in the separation of alkali ions.
基金Project supported by the Key Program of the National Natural Science Foundation of China(Grant Nos.21031001 and U1034003)the National Natural Science Foundation of China(Grant Nos.20971040 and 21173072)the Cultivation Fund of the Key Scientific and Technical Innovation Project,Ministry of Education of China(Grant No.708029)
文摘The electronic structures and field emission properties of capped CNT55 systems with or without alkali metal atom adsorption were systematically investigated by density functional theory calculation.The results indicate that the adsorption of alkali metal on the center site of a CNT tip is energetically favorable.In addition,the adsorption energies increase with the introduction of the electric field.The excessive negative charges on CNT tips make electron emittance much easier and result in a decrease in work function.Furthermore,the inducing effect by positively charged alkali metal atoms can be reasonably considered as the dominant reason for the improvement in field emission properties.
基金This work was financially supported by The foundation for young scientists of hubei province(grant number 610112246)the foundation for Doctoral startup project of Hubei University of Technology(grant number 337/338).
文摘This study aimed to modify isolated and extracted peanut protein with hot alkali to study the impact of pH,heating temperature,processing time and other alkali liquor conditions on the molecular structure of the peanut.Curcumin was loaded in modified peanut protein.The results of the study are as follows:Within the alkaline range of 8<pH<12,the percentage of amino acid residue(AAR)and-turns first increased and then decreased with the increasing pH,and the percentage of AAR reached a maximum 5.21±0.33%when the pH was 11(p<0.01).The percentage of˛-helices andβ-sheets gradually decreased with increasing pH,while that of random coils gradually increased with increasing pH,reaching a maximum 11.24±0.87%when the pH was 11(p<0.05).Within the range of the heating temperature 75℃<T<95℃,the percentage of random coils andβ-sheets gradually increased with increasing heating temperature,while that of-helices and AAR gradually decreased with increasing heating temperature;they remained unchanged when the heating temperature was 90℃,and then decreased to(10.41±1.18%;p<0.01)and(4.02±2.12%;p<0.01),respectively.Within the range of 5 min<t<20 min,the percentage of random coils and AAR gradually increased with increasing heating time,while the percentage ofα-helices decreased from 11.83±1.04%to 10.75±2.34%with increased heating time(p<0.01).The optimum conditions for hot alkali modification of peanut protein as followed:heating temperature of 90℃,heating time of 20 min and a pH of alkali liquor of 11.Under these optimum conditions,the embedding rate of curcumin by the modified protein can reach 88.32±1.29%.
基金the National Key Project for Basic Research of China(973 Project)(No.2005CB221403)the Knowledge Innovation Program of the Chinese Academy of Sciences(Grant:DICP K2007D3)
文摘HZSM-5 zeolites with the micro-mesopore hierarchical porosity have been prepared by the post-synthesis of alkali-treatment, and their thermal and hydrothermal stabilities were studied using DTA, XRD, and NH3-TPD characterization techniques. Compared to the unmodified zeolite, the thermal and hydrothermal stabilities of the alkali-treated ZSM-5 zeolites were slightly deteriorated because of the introduction of mesopores caused by the desilication. Nevertheless, the alkali-treated zeolite framework could be maintained until the temperature increased to 1175 ℃.
