针对目前国内气象数据采集器几乎是利用国外产品的现状,给出了一种基于ARM(Advanced ReducedInstruction Set ComputerM ach ines)嵌入式处理器的多通道气象数据采集系统的设计方法。通过软、硬件技术的结合,实现了8通道模拟信号的采集...针对目前国内气象数据采集器几乎是利用国外产品的现状,给出了一种基于ARM(Advanced ReducedInstruction Set ComputerM ach ines)嵌入式处理器的多通道气象数据采集系统的设计方法。通过软、硬件技术的结合,实现了8通道模拟信号的采集,发挥了嵌入式系统在气象数据采集系统中的运用优势。同时采用CF(Compact F lash)卡存储技术和USB2.0(Un iversal Serial Bus 2.0)技术、以太网通信方式,弥补过去气象数据采集器通信方式单一、存储方式固定、软件设计复杂等缺点。实验结果表明,该数据采集系统采样精度达到14 b it,采样率为140 kHz/s,并实现了CF卡存储和3种不同通信方式。展开更多
文章设计一种应用于金刚石氮空位(nitrogen-vacancy,NV)系综量子实验的数字锁相放大器。为实现高速模拟与数字信号的采样、输出以及软硬件协同与同步处理能力,设计采用ZYNQ-7010芯片作为核心器件,基于现场可编程门阵列(field programmab...文章设计一种应用于金刚石氮空位(nitrogen-vacancy,NV)系综量子实验的数字锁相放大器。为实现高速模拟与数字信号的采样、输出以及软硬件协同与同步处理能力,设计采用ZYNQ-7010芯片作为核心器件,基于现场可编程门阵列(field programmable gate array,FPGA)与精简指令集计算机(reduced instruction set computer,RISC)微处理器(advanced RISC machines,ARM)内核的基本架构,同时搭载双路高采样率的模数转换器(analog to digital converter,ADC)和数模转换器(digital to analog converter,DAC)。整套系统可以同时进行多路锁相放大处理,输入模拟噪声低至1 nV/Hz 1/2,采样率高达125 MS/s,数据传输带宽可达800 Mib/s,具有集成化程度高、易操控、锁相准确性较高等特点。该设计成功应用在NV系综实验平台上,光探测磁共振(optically detected magnetic resonance,ODMR)实验及后续计算结果表明,使用文中锁相放大器的磁强计灵敏度可以达到1.23 nT/Hz 1/2。展开更多
This paper presents a debugging system for multi-pole array acoustic logging （MPAL） tools. The debugging system proposed in this study can debug the MPAL tool system, sub-system and local electronics. In the test eq...This paper presents a debugging system for multi-pole array acoustic logging （MPAL） tools. The debugging system proposed in this study can debug the MPAL tool system, sub-system and local electronics. In the test equipment, we have used principal and subordinate structures, and interconnected the host computer and the front-end machine via Ethernet. The front-end machine is based on the ARM7 （advanced reduced instruction set computing （RISC） machine） technique, the processor of which runs an embedded operating system, namely, uClinux OS. We have analyzed the system telecommunication, human-machine interface circuit, transmitter mandrel interface circuit, receiver mandrel interface circuit, and board-level test interface circuit. The software used in the system consists of the embedded front-computer software and the host application software. We have explained in detail the flow chart of the boot loader in the embedded front-computer software. The host application software is composed of four application subroutines, which match with the functional modules of the system hardware. A net communication program based on the server^client mode is implemented by means of socket programming and multi-thread programming. Test results indicate that the data transmission rate of the system is higher than 1 MB/s, which completely meets the current requirements of the data transmission rate between the tool system and the wireline telemetry device. Application of the debugging system, which includes multiple level test methods, shows that the proposed system can fully meet the test requirements of MPAL at various levels.展开更多
文摘针对目前国内气象数据采集器几乎是利用国外产品的现状,给出了一种基于ARM(Advanced ReducedInstruction Set ComputerM ach ines)嵌入式处理器的多通道气象数据采集系统的设计方法。通过软、硬件技术的结合,实现了8通道模拟信号的采集,发挥了嵌入式系统在气象数据采集系统中的运用优势。同时采用CF(Compact F lash)卡存储技术和USB2.0(Un iversal Serial Bus 2.0)技术、以太网通信方式,弥补过去气象数据采集器通信方式单一、存储方式固定、软件设计复杂等缺点。实验结果表明,该数据采集系统采样精度达到14 b it,采样率为140 kHz/s,并实现了CF卡存储和3种不同通信方式。
文摘文章设计一种应用于金刚石氮空位(nitrogen-vacancy,NV)系综量子实验的数字锁相放大器。为实现高速模拟与数字信号的采样、输出以及软硬件协同与同步处理能力,设计采用ZYNQ-7010芯片作为核心器件,基于现场可编程门阵列(field programmable gate array,FPGA)与精简指令集计算机(reduced instruction set computer,RISC)微处理器(advanced RISC machines,ARM)内核的基本架构,同时搭载双路高采样率的模数转换器(analog to digital converter,ADC)和数模转换器(digital to analog converter,DAC)。整套系统可以同时进行多路锁相放大处理,输入模拟噪声低至1 nV/Hz 1/2,采样率高达125 MS/s,数据传输带宽可达800 Mib/s,具有集成化程度高、易操控、锁相准确性较高等特点。该设计成功应用在NV系综实验平台上,光探测磁共振(optically detected magnetic resonance,ODMR)实验及后续计算结果表明,使用文中锁相放大器的磁强计灵敏度可以达到1.23 nT/Hz 1/2。
基金supported by National Science Foundation of China (61102102, 11134011, 11204380 and 11374371)Major National Science and Technology Projects (2011ZX05020-002)+2 种基金PetroChina Innovation Foundation (2014D-5006-0307)Science and Technology Project of CNPC (2014A-3912 and 2011B-4001)the Foundation of China University of Petroleum (KYJJ2012-05-07)
文摘This paper presents a debugging system for multi-pole array acoustic logging （MPAL） tools. The debugging system proposed in this study can debug the MPAL tool system, sub-system and local electronics. In the test equipment, we have used principal and subordinate structures, and interconnected the host computer and the front-end machine via Ethernet. The front-end machine is based on the ARM7 （advanced reduced instruction set computing （RISC） machine） technique, the processor of which runs an embedded operating system, namely, uClinux OS. We have analyzed the system telecommunication, human-machine interface circuit, transmitter mandrel interface circuit, receiver mandrel interface circuit, and board-level test interface circuit. The software used in the system consists of the embedded front-computer software and the host application software. We have explained in detail the flow chart of the boot loader in the embedded front-computer software. The host application software is composed of four application subroutines, which match with the functional modules of the system hardware. A net communication program based on the server^client mode is implemented by means of socket programming and multi-thread programming. Test results indicate that the data transmission rate of the system is higher than 1 MB/s, which completely meets the current requirements of the data transmission rate between the tool system and the wireline telemetry device. Application of the debugging system, which includes multiple level test methods, shows that the proposed system can fully meet the test requirements of MPAL at various levels.
