Thin heavily Mg-doped InGaN and GaN compound contact layer is used to form Ni/Au Ohmic contact to p-GaN. The growth conditions of the compound contact layer and its effect on the performance of Ni/Au Ohmic contact to ...Thin heavily Mg-doped InGaN and GaN compound contact layer is used to form Ni/Au Ohmic contact to p-GaN. The growth conditions of the compound contact layer and its effect on the performance of Ni/Au Ohmic contact to p-GaN are investigated. It is confirmed that the specific contact resistivity can be lowered nearly two orders by optimizing the growth conditions of compound contact layer. When the flow rate ratio between Mg and Ga gas sources of p＋＋-InGaN layer is 10.6% and the thickness of p＋＋-InGaN layer is 3 nm, the lowest specific contact resistivity of 3.98× 10-5 Ω cm2 is achieved. In addition, the experimental results indicate that the specific contact resistivity can be further lowered to 1.07 × 10-7Ω.cm2 by optimizing the alloying annealing temperature to 520 ℃.展开更多
A silicon-on-insulator （SOI） high performance lateral double-diffusion metal oxide semiconductor （LDMOS） on a compound buried layer （CBL） with a step buried oxide （SBO CBL SOI） is proposed. The step buried oxi...A silicon-on-insulator （SOI） high performance lateral double-diffusion metal oxide semiconductor （LDMOS） on a compound buried layer （CBL） with a step buried oxide （SBO CBL SOI） is proposed. The step buried oxide locates holes in the top interface of the upper buried oxide （UBO） layer. Furthermore, holes with high density are collected in the interface between the polysilicon layer and the lower buried oxide （LBO） layer. Consequently, the electric fields in both the thin LBO and the thick UBO are enhanced by these holes, leading to an improved breakdown voltage. The breakdown voltage of the SBO CBL SOI LDMOS increases to 847 V from the 477 V of a conventional SOI with the same thicknesses of SOI layer and the buried oxide layer. Moreover, SBO CBL SOI can also reduce the self-heating effect.展开更多
The preparation of ZnAlLa-hydrotalcite-like compounds [ZnAlLa-HTLcs] wasstudied. ZnAlLa-HTLcs were synthesized by a method of variable pH with the raw materials ofZn(NO_3)_2, Al(NO_3)_3, La(NO_3)_3, and NaOH. The eS&#...The preparation of ZnAlLa-hydrotalcite-like compounds [ZnAlLa-HTLcs] wasstudied. ZnAlLa-HTLcs were synthesized by a method of variable pH with the raw materials ofZn(NO_3)_2, Al(NO_3)_3, La(NO_3)_3, and NaOH. The eS'ccts of some factors (i.e. pH values, the moleratio of Al^(3+) to La^(3+), temperature and the period of hydrothermal treatment) on thepreparation of HTLcs were discussed systematically. XRD, TG-DTA, FT-IR spectroscopy, and ICP wereperformed to characterize ZnAlLa-HTLcs samples, and the thermal stability of HTLcs was alsodiscussed. It was shown that unique ZnAlLa-HTLcs with high crystallinity can be prepared, under theconditions of pH = 5.5-6.5, n(Zn^(2+))/n(Al^(3+) + La^(3+))=2 and the atomic ratio of La^(3+) toAl^(3+) ranging from 0.07 to 2, hydrothermal treatment at 120 ℃ for 5 h. When the calcination ofthe HTLcs is performed at temperatures above 200 ℃, ZnO phase is detected with Al_2O_3 and La_2O_3spreading on its top. The complex metal oxides derived from ZnAlLa-HTLcs at 500 ℃ have highercatalytic activity and selectivity than those from ZnAl-HTLcs for the esterification of acetic acidwith n-butanol under the same reaction conditions.展开更多
The effects of iodium-heterocyclic compound（3,6-di-[dimethytamino]-dibcnzopyrodoniun formate,IHC-64）on the action potentials and contractile force of the isolatedguinca pig papillary muscles were investigatad.50 μm...The effects of iodium-heterocyclic compound（3,6-di-[dimethytamino]-dibcnzopyrodoniun formate,IHC-64）on the action potentials and contractile force of the isolatedguinca pig papillary muscles were investigatad.50 μmol/L IHC-64 only inhibited contractile forceand had no effect on APA,dv/dt max,APD<sub>5</sub>0 and APD<sub>9</sub>0 of fast action potentials in Tyrode’s so-lution.All of these parametres were depressed by further increasing concentration of IHC-64.InK-rich Tyrodc’s solution,the depressive action of IHC-64 on slow action potentials andcontractile force could be antagonized by incrcased extracellular calcium.These results suggesr thatIHC-64 inhibit not only slow calcium influx but also fast sodium influx,and it may.（?）new calci-urn channd blockcr.展开更多
Through the fusing and the thermal oxidation technology, the bilayer compound film (SiO_(2)-PbO-Al_(2)O_(3))/SiO_(2) electret was successfully prepared on the single crystalline silicon substrate. Experiments indicate...Through the fusing and the thermal oxidation technology, the bilayer compound film (SiO_(2)-PbO-Al_(2)O_(3))/SiO_(2) electret was successfully prepared on the single crystalline silicon substrate. Experiments indicated that this co-mixture laminated-layer compound film possessed unique excellent electret properties. Without any chemical modification, the surface electric potential of the sample could get the equal value of the grid voltage after corona charging and decayed no more than 5% in 270d. Moreover, not only did the samples have the excellent capability of negative charges injection and storage, but also did they have the outstanding positive ones. Thermally stimulated discharge current spectra showed that the compound film had unique, single but stable charge-trapped mechanism corresponding to T = 290℃ positive/negative discharge current peak, which could be attributed to its special inner microstructure.展开更多
Na_(3)V_(2)(PO_(4))_(2)F_(3)(NVPF) is shown to be an attractive cathode material for sodium storage due to its high theoretical capacity and suitable working voltage.However,its low electronic conductivity and poor cy...Na_(3)V_(2)(PO_(4))_(2)F_(3)(NVPF) is shown to be an attractive cathode material for sodium storage due to its high theoretical capacity and suitable working voltage.However,its low electronic conductivity and poor cycling stability have to be addressed in order for enhanced high-rate performance and cycle life.Herein,we have prepared a 3D reduced graphene oxide (rGO) host-supported NVPF nanocuboids.We discover that polyvinyl alcohol (PVA) serves as an important structural directing agent that bridges between NVPF and rGO through the hydrogen bonding,and thus regulates the formation of the 3D r GO framework with NVPF nanocuboids embedded inside (NVPF@C@rGO).With such a unique construction,NVPF@C@rGO exhibits excellent cycling stability and rate performance for sodium storage,showing high reversible capacities of 121 m Ah/g and 113 mAh/g at 1C and 10C,respectively,and 103 mAh/g after 700cycles at 50C with 98.3%retention.Even at an extremely high current of 100C,it also delivers a reversible capacity of 64 mAh/g,surpassing the performance of many recently reported NVPF-based electrodes.Cyclic voltammetry (CV) and galvanostatic intermittent titration technique (GITT) data confirm the much better kinetic properties of NVPF@C@rGO electrode than the control samples of NVPF@rGO and pure NVPF.In-situ XRD results reveal that the 3D rGO housing can effectively suppress the lattice variation of NVPF,with a maximum volume change of only 1.84%during cycling.Moreover,the in-situ temperature sensing reveals the more stable working temperature of NVPF@C@rGO compared to phase-pure NVPF,suggesting a higher temperature safety of the electrode.Using NVPF@C@rGO as the positive electrode and commercial hard carbon as the negative electrode,a sodium-ion full battery has been assembled with about 110 m Ah/g at 1C for 300 cycles,corresponding to an energy density of 291 Wh kg^(-1).The construction of 3D r GO housing as a conductive support offers an effective strategy for high-rate,long cycle life and high safety sodium-ion battery cathodes.展开更多
基金support by the National Natural Science Foundation of China(Grant Nos.61474110,61377020,61376089,61223005,and 61176126)the National Science Fund for Distinguished Young Scholars,China(Grant No.60925017)
文摘Thin heavily Mg-doped InGaN and GaN compound contact layer is used to form Ni/Au Ohmic contact to p-GaN. The growth conditions of the compound contact layer and its effect on the performance of Ni/Au Ohmic contact to p-GaN are investigated. It is confirmed that the specific contact resistivity can be lowered nearly two orders by optimizing the growth conditions of compound contact layer. When the flow rate ratio between Mg and Ga gas sources of p＋＋-InGaN layer is 10.6% and the thickness of p＋＋-InGaN layer is 3 nm, the lowest specific contact resistivity of 3.98× 10-5 Ω cm2 is achieved. In addition, the experimental results indicate that the specific contact resistivity can be further lowered to 1.07 × 10-7Ω.cm2 by optimizing the alloying annealing temperature to 520 ℃.
基金Project supported by the National Natural Science Foundation of China (Grant Nos.60806025 and 60976060)in part by the State Key Laboratory of Electronic Thin Films and Integrated Devices,China (Grant No.CXJJ201004)
文摘A silicon-on-insulator （SOI） high performance lateral double-diffusion metal oxide semiconductor （LDMOS） on a compound buried layer （CBL） with a step buried oxide （SBO CBL SOI） is proposed. The step buried oxide locates holes in the top interface of the upper buried oxide （UBO） layer. Furthermore, holes with high density are collected in the interface between the polysilicon layer and the lower buried oxide （LBO） layer. Consequently, the electric fields in both the thin LBO and the thick UBO are enhanced by these holes, leading to an improved breakdown voltage. The breakdown voltage of the SBO CBL SOI LDMOS increases to 847 V from the 477 V of a conventional SOI with the same thicknesses of SOI layer and the buried oxide layer. Moreover, SBO CBL SOI can also reduce the self-heating effect.
基金Supported by Shanxi Province Natural Science Funds.(20001015)
文摘The preparation of ZnAlLa-hydrotalcite-like compounds [ZnAlLa-HTLcs] wasstudied. ZnAlLa-HTLcs were synthesized by a method of variable pH with the raw materials ofZn(NO_3)_2, Al(NO_3)_3, La(NO_3)_3, and NaOH. The eS'ccts of some factors (i.e. pH values, the moleratio of Al^(3+) to La^(3+), temperature and the period of hydrothermal treatment) on thepreparation of HTLcs were discussed systematically. XRD, TG-DTA, FT-IR spectroscopy, and ICP wereperformed to characterize ZnAlLa-HTLcs samples, and the thermal stability of HTLcs was alsodiscussed. It was shown that unique ZnAlLa-HTLcs with high crystallinity can be prepared, under theconditions of pH = 5.5-6.5, n(Zn^(2+))/n(Al^(3+) + La^(3+))=2 and the atomic ratio of La^(3+) toAl^(3+) ranging from 0.07 to 2, hydrothermal treatment at 120 ℃ for 5 h. When the calcination ofthe HTLcs is performed at temperatures above 200 ℃, ZnO phase is detected with Al_2O_3 and La_2O_3spreading on its top. The complex metal oxides derived from ZnAlLa-HTLcs at 500 ℃ have highercatalytic activity and selectivity than those from ZnAl-HTLcs for the esterification of acetic acidwith n-butanol under the same reaction conditions.
文摘The effects of iodium-heterocyclic compound（3,6-di-[dimethytamino]-dibcnzopyrodoniun formate,IHC-64）on the action potentials and contractile force of the isolatedguinca pig papillary muscles were investigatad.50 μmol/L IHC-64 only inhibited contractile forceand had no effect on APA,dv/dt max,APD<sub>5</sub>0 and APD<sub>9</sub>0 of fast action potentials in Tyrode’s so-lution.All of these parametres were depressed by further increasing concentration of IHC-64.InK-rich Tyrodc’s solution,the depressive action of IHC-64 on slow action potentials andcontractile force could be antagonized by incrcased extracellular calcium.These results suggesr thatIHC-64 inhibit not only slow calcium influx but also fast sodium influx,and it may.（?）new calci-urn channd blockcr.
基金the National Natural Science Foundation of China under Grant No.59372109.
文摘Through the fusing and the thermal oxidation technology, the bilayer compound film (SiO_(2)-PbO-Al_(2)O_(3))/SiO_(2) electret was successfully prepared on the single crystalline silicon substrate. Experiments indicated that this co-mixture laminated-layer compound film possessed unique excellent electret properties. Without any chemical modification, the surface electric potential of the sample could get the equal value of the grid voltage after corona charging and decayed no more than 5% in 270d. Moreover, not only did the samples have the excellent capability of negative charges injection and storage, but also did they have the outstanding positive ones. Thermally stimulated discharge current spectra showed that the compound film had unique, single but stable charge-trapped mechanism corresponding to T = 290℃ positive/negative discharge current peak, which could be attributed to its special inner microstructure.
基金financially supported by the National Natural Science Foundation of China (No. 52372176)Guangdong Basic and Applied Basic Research Foundation (No. 2024A1515011517)。
文摘Na_(3)V_(2)(PO_(4))_(2)F_(3)(NVPF) is shown to be an attractive cathode material for sodium storage due to its high theoretical capacity and suitable working voltage.However,its low electronic conductivity and poor cycling stability have to be addressed in order for enhanced high-rate performance and cycle life.Herein,we have prepared a 3D reduced graphene oxide (rGO) host-supported NVPF nanocuboids.We discover that polyvinyl alcohol (PVA) serves as an important structural directing agent that bridges between NVPF and rGO through the hydrogen bonding,and thus regulates the formation of the 3D r GO framework with NVPF nanocuboids embedded inside (NVPF@C@rGO).With such a unique construction,NVPF@C@rGO exhibits excellent cycling stability and rate performance for sodium storage,showing high reversible capacities of 121 m Ah/g and 113 mAh/g at 1C and 10C,respectively,and 103 mAh/g after 700cycles at 50C with 98.3%retention.Even at an extremely high current of 100C,it also delivers a reversible capacity of 64 mAh/g,surpassing the performance of many recently reported NVPF-based electrodes.Cyclic voltammetry (CV) and galvanostatic intermittent titration technique (GITT) data confirm the much better kinetic properties of NVPF@C@rGO electrode than the control samples of NVPF@rGO and pure NVPF.In-situ XRD results reveal that the 3D rGO housing can effectively suppress the lattice variation of NVPF,with a maximum volume change of only 1.84%during cycling.Moreover,the in-situ temperature sensing reveals the more stable working temperature of NVPF@C@rGO compared to phase-pure NVPF,suggesting a higher temperature safety of the electrode.Using NVPF@C@rGO as the positive electrode and commercial hard carbon as the negative electrode,a sodium-ion full battery has been assembled with about 110 m Ah/g at 1C for 300 cycles,corresponding to an energy density of 291 Wh kg^(-1).The construction of 3D r GO housing as a conductive support offers an effective strategy for high-rate,long cycle life and high safety sodium-ion battery cathodes.
