A series of Mn-doped TiO2 nanowires(NWs) were prepared by hydrothermal method at the mole fraction of Mn changing from 0 to 12.0%.X-ray powder diffraction(XRD) analysis shows that all the samples have pure anatase str...A series of Mn-doped TiO2 nanowires(NWs) were prepared by hydrothermal method at the mole fraction of Mn changing from 0 to 12.0%.X-ray powder diffraction(XRD) analysis shows that all the samples have pure anatase structure.SEM and TEM studies show that the diameter and the length of the Mn-doped TiO2 NWs are larger than those of the undoped TiO2 NWs.Energy dispersive X-ray spectroscopy(EDX) reveals that the samples are composed of Ti,Mn and O.According to magnetization measurements,all samples show ferromagnetic behavior,but only the undoped TiO2 NWs are completely ferromagnetic with a saturated magnetization about 1.0 mA·m2/kg.Mn-doped TiO2 samples exhibit antiferromagnetic and ferromagnetic(AF-FM) behaviors simultaneously.Photoluminescence(PL) spectra demonstrate the existence of MnO2 sublattice.These observations indicate that an AF-WF crossover is induced by the coexistence of TiO2 sublattice and MnO2 sublattice.展开更多
Pure Cu nanowires as catalyst were prepared by electrochemical deposition and were used in CO2 hydrogenation to methanol.The active sites of the Cu based catalyst were discussed.The performance and structural developm...Pure Cu nanowires as catalyst were prepared by electrochemical deposition and were used in CO2 hydrogenation to methanol.The active sites of the Cu based catalyst were discussed.The performance and structural development of the catalyst were observed during CO2 hydrogenation.A mechanism for the deactivation of the catalyst was discussed.The key factors that affect the deactivation of the catalyst were found.Cu nanowire sample was characterized by SEM,EDS,XRD,and BET.The results show that Cu nanowires have very high sintering resistance and catalytic stability.This helps to develop high performance catalysts.The changes in the grain size,SEM morphology and catalytic properties of the sample during CO2 hydrogenation show that the migration of the Cu atoms on the surface of the Cu nanowires can occur.Continuous migration of Cu atoms and sintering of Cu grains can lead to flow blockage in gas channels.The gas channel flow blockage or the sintering of Cu grains can lead to deactivation of the catalyst.However,the shape of catalytic performance curve indicates that the main reason for the deactivation of the catalyst is the gas channel flow blockage.展开更多
The performance of the photodetector is significantly impacted by the inherent surface faults in GaAs nanowires(NWs).We combined three-dimensional(3D)gallium arsenide nanowires with zero-dimensional(0D)WS_(2) quantum ...The performance of the photodetector is significantly impacted by the inherent surface faults in GaAs nanowires(NWs).We combined three-dimensional(3D)gallium arsenide nanowires with zero-dimensional(0D)WS_(2) quantum dot(QDs)materials in a simple and convenient way to form a heterogeneous structure.Various performance enhancements have been realized through the formation of typeⅡenergy bands in heterostructures,opening up new research directions for the future development of photodetector devices.This work successfully fabricated a high-sensitivity photodetector based on WS_(2)QDs/GaAs NWs heterostructure.Under 660 nm laser excitation,the photodetector exhibits a responsivity of 368.07 A/W,a detectivity of 2.7×10^(12)Jones,an external quantum efficiency of 6.47×10^(2)%,a low-noise equivalent power of 2.27×10^(-17)W·Hz^(-1/2),a response time of 0.3 s,and a recovery time of 2.12 s.This study provides a new solution for the preparation of high-performance GaAs detectors and promotes the development of optoelectronic devices for GaAs NWs.展开更多
Ni(OH) 2 nanoparticles were synthesized from reversed micelles consisted of AOT/iso-octane and Triton X-100/octanol/cyclohexane, respectively and cha racterized by UV-Vis, TEM and SEM, Ni(OH) 2 wire was prepared from ...Ni(OH) 2 nanoparticles were synthesized from reversed micelles consisted of AOT/iso-octane and Triton X-100/octanol/cyclohexane, respectively and cha racterized by UV-Vis, TEM and SEM, Ni(OH) 2 wire was prepared from the sys tem of AOT/iso- octane and Ni(OH) 2 nano-powder was obtained in th e system of Triton X-100 /octanol/cyclohexane. The sizes of Ni(OH) 2 p owder, particle and wire were ～15 nm, ～25 nm , and ～60 nm, respectivel y.展开更多
Aqueous zinc-ion electrochromic(EC)technology,boasting the capability to fulfill both safety and cost-ef⁃fectiveness requirements,is garnering extensive attention in various application areas including smart windows,t...Aqueous zinc-ion electrochromic(EC)technology,boasting the capability to fulfill both safety and cost-ef⁃fectiveness requirements,is garnering extensive attention in various application areas including smart windows,thermal management,displays,and camouflage.However,typical inorganic EC materials,such as tungsten oxides(WO_(3)),of⁃ten suffer from slow ion diffusion kinetics and limited optical contrast within the aqueous Zn^(2+)electrolyte because of the large size and strong Coulombic interactions of the Zn^(2+),which limits their wide applicability.Here,ordered WO_(3)nanowire films,constructed by a one-step grazing angle deposition method,is demonstrated to boost the response speed and optical contrast during EC phenomena.Compared with dense films,the ordered WO_(3)nanowire films with a porosity of 44.6%demonstrate anti-reflective property and excellent comprehensive EC performance,including fast response time(3.6 s and 1.2 s for coloring and bleaching,respectively),large optical contrast(66.6%at 700 nm)and high col⁃oration efficiency(64.3 cm^(2)·C^(-1)).A large-area prototype EC device(17 cm×12 cm)with fast color-switching is also successfully achieved.Mechanistic studies show that the improved performance is mainly due to the ordered porous nanowire structures,which provides direct electron transfer paths and sufficient interfacial contacts,thus simultaneously enhancing the electrochemical activity and fast redox kinetics.This study provides a simple and effective strategy to im⁃prove the performance of tungsten oxide-based aqueous zinc ion EC materials and devices.展开更多
基金Project(06JJ2031) supported by Natrual Science Foundation of Hunan Province, ChinaProject(06A065) supported by Education Department of Hunan Province, China
文摘A series of Mn-doped TiO2 nanowires(NWs) were prepared by hydrothermal method at the mole fraction of Mn changing from 0 to 12.0%.X-ray powder diffraction(XRD) analysis shows that all the samples have pure anatase structure.SEM and TEM studies show that the diameter and the length of the Mn-doped TiO2 NWs are larger than those of the undoped TiO2 NWs.Energy dispersive X-ray spectroscopy(EDX) reveals that the samples are composed of Ti,Mn and O.According to magnetization measurements,all samples show ferromagnetic behavior,but only the undoped TiO2 NWs are completely ferromagnetic with a saturated magnetization about 1.0 mA·m2/kg.Mn-doped TiO2 samples exhibit antiferromagnetic and ferromagnetic(AF-FM) behaviors simultaneously.Photoluminescence(PL) spectra demonstrate the existence of MnO2 sublattice.These observations indicate that an AF-WF crossover is induced by the coexistence of TiO2 sublattice and MnO2 sublattice.
基金Project(51074205)supported by the National Natural Science Foundation of China
文摘Pure Cu nanowires as catalyst were prepared by electrochemical deposition and were used in CO2 hydrogenation to methanol.The active sites of the Cu based catalyst were discussed.The performance and structural development of the catalyst were observed during CO2 hydrogenation.A mechanism for the deactivation of the catalyst was discussed.The key factors that affect the deactivation of the catalyst were found.Cu nanowire sample was characterized by SEM,EDS,XRD,and BET.The results show that Cu nanowires have very high sintering resistance and catalytic stability.This helps to develop high performance catalysts.The changes in the grain size,SEM morphology and catalytic properties of the sample during CO2 hydrogenation show that the migration of the Cu atoms on the surface of the Cu nanowires can occur.Continuous migration of Cu atoms and sintering of Cu grains can lead to flow blockage in gas channels.The gas channel flow blockage or the sintering of Cu grains can lead to deactivation of the catalyst.However,the shape of catalytic performance curve indicates that the main reason for the deactivation of the catalyst is the gas channel flow blockage.
文摘The performance of the photodetector is significantly impacted by the inherent surface faults in GaAs nanowires(NWs).We combined three-dimensional(3D)gallium arsenide nanowires with zero-dimensional(0D)WS_(2) quantum dot(QDs)materials in a simple and convenient way to form a heterogeneous structure.Various performance enhancements have been realized through the formation of typeⅡenergy bands in heterostructures,opening up new research directions for the future development of photodetector devices.This work successfully fabricated a high-sensitivity photodetector based on WS_(2)QDs/GaAs NWs heterostructure.Under 660 nm laser excitation,the photodetector exhibits a responsivity of 368.07 A/W,a detectivity of 2.7×10^(12)Jones,an external quantum efficiency of 6.47×10^(2)%,a low-noise equivalent power of 2.27×10^(-17)W·Hz^(-1/2),a response time of 0.3 s,and a recovery time of 2.12 s.This study provides a new solution for the preparation of high-performance GaAs detectors and promotes the development of optoelectronic devices for GaAs NWs.
文摘Ni(OH) 2 nanoparticles were synthesized from reversed micelles consisted of AOT/iso-octane and Triton X-100/octanol/cyclohexane, respectively and cha racterized by UV-Vis, TEM and SEM, Ni(OH) 2 wire was prepared from the sys tem of AOT/iso- octane and Ni(OH) 2 nano-powder was obtained in th e system of Triton X-100 /octanol/cyclohexane. The sizes of Ni(OH) 2 p owder, particle and wire were ～15 nm, ～25 nm , and ～60 nm, respectivel y.
基金Supported by Jilin Provincial Scientific and Technological Development Program(20230508109RC,20230201051GX,20220201091GX)National Natural Science Foundation of China(62035013,61275235)。
文摘Aqueous zinc-ion electrochromic(EC)technology,boasting the capability to fulfill both safety and cost-ef⁃fectiveness requirements,is garnering extensive attention in various application areas including smart windows,thermal management,displays,and camouflage.However,typical inorganic EC materials,such as tungsten oxides(WO_(3)),of⁃ten suffer from slow ion diffusion kinetics and limited optical contrast within the aqueous Zn^(2+)electrolyte because of the large size and strong Coulombic interactions of the Zn^(2+),which limits their wide applicability.Here,ordered WO_(3)nanowire films,constructed by a one-step grazing angle deposition method,is demonstrated to boost the response speed and optical contrast during EC phenomena.Compared with dense films,the ordered WO_(3)nanowire films with a porosity of 44.6%demonstrate anti-reflective property and excellent comprehensive EC performance,including fast response time(3.6 s and 1.2 s for coloring and bleaching,respectively),large optical contrast(66.6%at 700 nm)and high col⁃oration efficiency(64.3 cm^(2)·C^(-1)).A large-area prototype EC device(17 cm×12 cm)with fast color-switching is also successfully achieved.Mechanistic studies show that the improved performance is mainly due to the ordered porous nanowire structures,which provides direct electron transfer paths and sufficient interfacial contacts,thus simultaneously enhancing the electrochemical activity and fast redox kinetics.This study provides a simple and effective strategy to im⁃prove the performance of tungsten oxide-based aqueous zinc ion EC materials and devices.
