A remote open-path laser-induced breakdown spectroscopy(LIBS) system was designed and studied in the present work for the purpose of combining the LIBS technique with the steel production line. In this system, the rel...A remote open-path laser-induced breakdown spectroscopy(LIBS) system was designed and studied in the present work for the purpose of combining the LIBS technique with the steel production line. In this system, the relatively simple configuration and optics were employed to measure the steel samples at a remote distance and a hot sample temperature. The system has obtained a robustness for the deviation of the sample position because of the open-path and alloptical structure. The measurement was carried out at different sample temperatures by placing the samples in a muffle furnace with a window in the front door. The results show that the intensity of the spectral lines increased as the sample temperature increased. The influence of the sample temperature on the quantitative analysis of manganese in the steel samples was investigated by measuring ten standard steel samples at different temperatures. Three samples were selected as the test sample for the simulation measurement. The results show that, at the sample temperature of 500 ℃, the average relative error of prediction is 3.1% and the average relative standard deviation is 7.7%, respectively.展开更多
With the SPSS and the help of factor method and hierarchical clustered method,journal articles on digital information resources(DIR) from CNKI in the past ten years are analyzed with a co-word analytical method in thi...With the SPSS and the help of factor method and hierarchical clustered method,journal articles on digital information resources(DIR) from CNKI in the past ten years are analyzed with a co-word analytical method in this paper. The hot issues of studies on DIR and the relationship between those subjects are analyzed in this investigation as well.展开更多
This paper focuses on optimally determining the existence of connected paths between some given nodes in random ring-based graphs.Serving as a fundamental underlying structure in network modeling,ring topology appears...This paper focuses on optimally determining the existence of connected paths between some given nodes in random ring-based graphs.Serving as a fundamental underlying structure in network modeling,ring topology appears as commonplace in many realistic scenarios.Regarding this,we consider graphs composed of rings,with some possible connected paths between them.Without prior knowledge of the exact node permutations on rings,the existence of each edge can be unraveled through edge testing at a unit cost in one step.The problem examined is that of determining whether the given nodes are connected by a path or separated by a cut,with the minimum expected costs involved.Dividing the problem into different cases based on different topologies of the ring-based networks,we propose the corresponding policies that aim to quickly seek the paths between nodes.A common feature shared by all those policies is that we stick to going in the same direction during edge searching,with edge testing in each step only involving the test between the source and the node that has been tested most.The simple searching rule,interestingly,can be interpreted as a delightful property stemming from the neat structure of ring-based networks,which makes the searching process not rely on any sophisticated behaviors.We prove the optimality of the proposed policies by calculating the expected cost incurred and making a comparison with the other class of strategies.The effectiveness of the proposed policies is also verified through extensive simulations,from which we even disclose three extra intriguing findings:i)in a onering network,the cost will grow drastically with the number of designated nodes when the number is small and will grow slightly when that number is large;ii)in ring-based network,Depth First is optimal in detecting the connectivity between designated nodes;iii)the problem of multi-ring networks shares large similarity with that of two-ring networks,and a larger number of ties between rings will not influence the expected cost.展开更多
为实现涡轮增压器向大流量高压比方向发展,需对增压器的主要激励源及其贡献量进行探究,从而保证其运行状态可靠稳定,这对其噪声与振动控制具有重要意义。基于工况传递路径分析(Operational Transfer Path Analysis,OTPA),以某型柴油机...为实现涡轮增压器向大流量高压比方向发展,需对增压器的主要激励源及其贡献量进行探究,从而保证其运行状态可靠稳定,这对其噪声与振动控制具有重要意义。基于工况传递路径分析(Operational Transfer Path Analysis,OTPA),以某型柴油机涡轮增压器轴承体的加速度信号作为目标响应点,建立振动-噪声传递路径分析模型,详细分析该增压器的主要激励来源以及传递路径贡献量。结果表明:在低频范围内,发动机基础激励的贡献占主导地位。当频率达到气动载荷基频时,压气机端气动载荷激励的贡献增大,甚至高于发动机的激励。随增压器转速的升高,基频不断增大,其贡献量也逐渐增大,而涡端气动载荷激励的贡献一直较小。在相同气动载荷条件下,发动机转速越高,目标点的振动响应越大。展开更多
基金supported by National Natural Science Foundation of China (Nos. 51506171 and 51675415)National Natural Science Foundation of China for Key Program (No. 51335009)+1 种基金National Key Research and Development Program of China (No. 2017YFD0700200)the joint research fund between Tokushima University and Xi’an Jiaotong University
文摘A remote open-path laser-induced breakdown spectroscopy(LIBS) system was designed and studied in the present work for the purpose of combining the LIBS technique with the steel production line. In this system, the relatively simple configuration and optics were employed to measure the steel samples at a remote distance and a hot sample temperature. The system has obtained a robustness for the deviation of the sample position because of the open-path and alloptical structure. The measurement was carried out at different sample temperatures by placing the samples in a muffle furnace with a window in the front door. The results show that the intensity of the spectral lines increased as the sample temperature increased. The influence of the sample temperature on the quantitative analysis of manganese in the steel samples was investigated by measuring ten standard steel samples at different temperatures. Three samples were selected as the test sample for the simulation measurement. The results show that, at the sample temperature of 500 ℃, the average relative error of prediction is 3.1% and the average relative standard deviation is 7.7%, respectively.
基金supported by the Fund for Philosophy and Social Sciences,Ministry of Education of China(Grant No.05JZD00024)
文摘With the SPSS and the help of factor method and hierarchical clustered method,journal articles on digital information resources(DIR) from CNKI in the past ten years are analyzed with a co-word analytical method in this paper. The hot issues of studies on DIR and the relationship between those subjects are analyzed in this investigation as well.
基金supported by NSF China(No.61960206002,62020106005,42050105,62061146002)Shanghai Pilot Program for Basic Research-Shanghai Jiao Tong University。
文摘This paper focuses on optimally determining the existence of connected paths between some given nodes in random ring-based graphs.Serving as a fundamental underlying structure in network modeling,ring topology appears as commonplace in many realistic scenarios.Regarding this,we consider graphs composed of rings,with some possible connected paths between them.Without prior knowledge of the exact node permutations on rings,the existence of each edge can be unraveled through edge testing at a unit cost in one step.The problem examined is that of determining whether the given nodes are connected by a path or separated by a cut,with the minimum expected costs involved.Dividing the problem into different cases based on different topologies of the ring-based networks,we propose the corresponding policies that aim to quickly seek the paths between nodes.A common feature shared by all those policies is that we stick to going in the same direction during edge searching,with edge testing in each step only involving the test between the source and the node that has been tested most.The simple searching rule,interestingly,can be interpreted as a delightful property stemming from the neat structure of ring-based networks,which makes the searching process not rely on any sophisticated behaviors.We prove the optimality of the proposed policies by calculating the expected cost incurred and making a comparison with the other class of strategies.The effectiveness of the proposed policies is also verified through extensive simulations,from which we even disclose three extra intriguing findings:i)in a onering network,the cost will grow drastically with the number of designated nodes when the number is small and will grow slightly when that number is large;ii)in ring-based network,Depth First is optimal in detecting the connectivity between designated nodes;iii)the problem of multi-ring networks shares large similarity with that of two-ring networks,and a larger number of ties between rings will not influence the expected cost.
文摘为实现涡轮增压器向大流量高压比方向发展,需对增压器的主要激励源及其贡献量进行探究,从而保证其运行状态可靠稳定,这对其噪声与振动控制具有重要意义。基于工况传递路径分析(Operational Transfer Path Analysis,OTPA),以某型柴油机涡轮增压器轴承体的加速度信号作为目标响应点,建立振动-噪声传递路径分析模型,详细分析该增压器的主要激励来源以及传递路径贡献量。结果表明:在低频范围内,发动机基础激励的贡献占主导地位。当频率达到气动载荷基频时,压气机端气动载荷激励的贡献增大,甚至高于发动机的激励。随增压器转速的升高,基频不断增大,其贡献量也逐渐增大,而涡端气动载荷激励的贡献一直较小。在相同气动载荷条件下,发动机转速越高,目标点的振动响应越大。
