The composition and sequence distribution of monomeric units in polyester polyether multiblock copolymer were studied by pyrolysis? gas chromatography (PGC) and pyrolysis gas chromatography/mass spectrometry (PGC/M...The composition and sequence distribution of monomeric units in polyester polyether multiblock copolymer were studied by pyrolysis? gas chromatography (PGC) and pyrolysis gas chromatography/mass spectrometry (PGC/MS). PGC was applied to study the F t curve of the multiblock copolymer and PGC/MS was used to separate and identify the pyrolyzates. DTA experiment was used to study the decomposition temperature. The results show that the beginning point of elastomer’s decomposition was about 300?℃ and the decomposition temperature of most of the sample was 550?℃. Many pyrolyzates were produced because of the breaking of weak bonds in the sample. The possible microstructure was verified and the pyrolysis pathway of the copolymer was investigated.展开更多
Abstract A newly developed coaxial dielectric barrier discharge reactor with a length of 1000 mm at an atmospheric pressure was used for plasma treatment of polyester fiber cord in a roll-to-roll manner. In this react...Abstract A newly developed coaxial dielectric barrier discharge reactor with a length of 1000 mm at an atmospheric pressure was used for plasma treatment of polyester fiber cord in a roll-to-roll manner. In this reactor, swirling mixture gases of oxygen of about 1% and argon with a flow rate of 1.5 L/rain to 2.7 L/min ensured the gas usage sparing, discharge uniformity and efficient fiber surface modification. The water contact angle and surface morphology of the treated fiber were measured. The results show that the surface oxygenation is mainly responsible for the wettability improvement of the fiber cord when passing through the plasma zone at a linear speed of 3 m/min to 8 m/rain. The specimens of modified-polyester fiber reinforced rubber composite were also prepared for the interracial shear strength tests. Furthermore, the effect of adding oxygen into argon discharge on the fiber surface oxidation was correlated with optical emission spectroscopy. Finally, the effect of adding oxygen into argon discharge on the kinetic processes of the active species generation were also analyzed.展开更多
To achieve an atmospheric pressure glow discharge（APGD）in air and modify the surface of polyester thread using plasma,the electric field distribution and discharge characteristics under different conditions were stu...To achieve an atmospheric pressure glow discharge（APGD）in air and modify the surface of polyester thread using plasma,the electric field distribution and discharge characteristics under different conditions were studied.We found that the region with a strong electric field,which was formed in a tiny gap between two electrodes constituting a line-line contact electrode structure,provided the initial electron for the entire discharge process.Thus,the discharge voltage was reduced.The dielectric barrier of the line-line contact electrodes can inhibit the generation of secondary electrons.Thus,the transient current pulse discharge was reduced significantly,and an APGD in air was achieved.We designed double layer line-line contact electrodes,which can generate the APGD on the surface of a material under treatment directly.A noticeable change in the surface morphology of polyester fiber was visualized with the aid of a scanning electron microscope（SEM）.Two electrode structures-the multi-row line-line and double-helix line-line contact electrodes-were designed.A large area of the APGD plasma with flat and curved surfaces can be formed in air using these contact electrodes.This can improve the efficiency of surface treatment and is significant for the application of the APGD plasma in industries.展开更多
The taut mooring system using synthetic fiber ropes has overcome the shortcomings such as the large self-weight of the mooring lines and provides better mooring performance for the floating structures.The polyester ro...The taut mooring system using synthetic fiber ropes has overcome the shortcomings such as the large self-weight of the mooring lines and provides better mooring performance for the floating structures.The polyester rope has attracted much attention among numerous synthetic fiber rope materials due to its lightweight,low price,corrosion resistance,and high strength.Thus,the mooring characteristics of it are worth studying.Polyester mooring lines are flexible in deep water,when a marine structure is moored by them,the geometric nonlinearity such as large displacement,large stretch,and large bending deformation,and the material nonlinearity like viscoelastic of the polyester ropes become complex integrated problems to be studied.Considering the nonlinear phenomenon,the simulation and calculation of a polyester line were carried out by the absolute nodal coordinate formulation(ANCF)in this paper since the ANCF method has advantages in dealing with the significant deformation problems of the flexible structures.In addition,a chain mooring line was also simulated for comparison,and the results show that the polyester ropes reduce the self-weight of the mooring lines and provide sufficient mooring strength at the same time,and the nonlinear phenomenon of the polyester ropes is different from that of the chain mooring lines.展开更多
Carbonaceous nanomaterials such as carbon nanotubes （CNTs）, magnetic metal nanomaterials and semicon- ductor nanomaterials are superior candidates for microwave absorbers. Taking full advantage of the features of CN...Carbonaceous nanomaterials such as carbon nanotubes （CNTs）, magnetic metal nanomaterials and semicon- ductor nanomaterials are superior candidates for microwave absorbers. Taking full advantage of the features of CNTs, nanophase cobalt and nanophase zinc oxide, whose main microwave absorption mechanisms are based on resistance loss, magnetic loss and dielectric loss, we fabricate CNT/Co and CNT/ZnO heterostructure nanocom- posites, respectively. By using the CNTs, CNT/Co nanocomposites and CNT/ZnO nanocomposites as nanofillers, composites with polyester as matrix are prepared by in situ polymerization, and their microwave absorption per- formance is studied. It is indicated that the synergetic effects of the physic properties of different components in nano-heterostructures result in greatly enhanced microwave absorption performance in a wide frequency range. The absorption peak is increased, the absorption bandwidth is broadened, and the maximum peak shifts to a lower frequency.展开更多
Polyesters,such as polylactide(PLA),are a class of biodegra-dable and biocompatible polymers that have received increasing attention in biomedicine,agriculture,and commodity thermoplastics[1-2].However,the lack of pen...Polyesters,such as polylactide(PLA),are a class of biodegra-dable and biocompatible polymers that have received increasing attention in biomedicine,agriculture,and commodity thermoplastics[1-2].However,the lack of pendant functionality of conventional polyesters makes it difficult to modify and modulate the physicochemical properties in subsequent applications[3-4].Since 2006[5],the ring-opening polymerization(ROP)of O-carbox-yanhydrides(OCAs),which can be readily synthesized from amino acid or hydroxyl acid precursors,has been recognized as a promising route to functionalized polyesters[3-4].However,due to the increased methine C-H acidity,significant racemization of the stereogenic center and decreased stereoregularity have been identified for most OCAs,for instance,ManOCA[6](OCA from mandelic acid)and SerOCA[7](OCA from serine),when using typical 4-(dimethylamino)pyridine(DMAP)as catalyst.To minimize epimerization,some classical metal-based catalysts of coordination polymerization have been introduced to mediate ROP of OCAs,furnishing isotactic polyesters[8].展开更多
A series of biodegradable aliphatic-aromatic copolyesters, poly(butylene terephthalate-co-butylene adipate-co- ethylene terephthalate-co-ethylene adipate) (PBATE), were synthesized from terephthalic acid (PTA), adipic...A series of biodegradable aliphatic-aromatic copolyesters, poly(butylene terephthalate-co-butylene adipate-co- ethylene terephthalate-co-ethylene adipate) (PBATE), were synthesized from terephthalic acid (PTA), adipic acid (AA), 1,4-butanediol (BG) and ethylene glycol (EG) through direct esterification and polycondensation. The sequence structure and crystallinity of the copolyester were investigated by 1H NMR spectroscopy and the wide-angle X-ray diffractometry (WAXD). The analytical results showed that the PBATE copolyester was a random copolymer and the composition of PBATE copolyester was almost consistent with the feed molar ratios. The crystal structure of PBATE copolyester belonged to the triclinic crystalline system; The variation in melting point of the synthesized PBATE copolyester agreed well with the estimation obtained by the Flory equation and was applicable to the random copolymer.展开更多
In recent years, the domestic polyester industry filament production and technology continue to improve, the downstream application of products continues to expand. Especially in the application of high-end products, ...In recent years, the domestic polyester industry filament production and technology continue to improve, the downstream application of products continues to expand. Especially in the application of high-end products, areas related to the automotive safety industry are outstanding.展开更多
The global polyester resin dispersion market size is anticipated to reach a valuation of US$7,635.4 million by 2023.It is projected to witness a CAGR of 4.8%in the estimated time period from 2023 to 2033.A valuation o...The global polyester resin dispersion market size is anticipated to reach a valuation of US$7,635.4 million by 2023.It is projected to witness a CAGR of 4.8%in the estimated time period from 2023 to 2033.A valuation of around US$12,200.7 million is predicted for the global market by 2033.展开更多
According to Future Market Insights,the global nonwoven polyester fabric market is projected to increase at a CAGR of 6.84%in the forecast period from 2023 to 2033.The market size in 2023 is likely to reach US$54.8 bi...According to Future Market Insights,the global nonwoven polyester fabric market is projected to increase at a CAGR of 6.84%in the forecast period from 2023 to 2033.The market size in 2023 is likely to reach US$54.8 billion and in 2033 it will reach US$106.2 billion.The market size in 2022 was US$51.31 billion.展开更多
In 2008 there are many events taking place in China: tightened currency policy, new labor law and new enterprise income tax law, as well as the Recycling Economic Law, which will directly impact recycling industry. Ho...In 2008 there are many events taking place in China: tightened currency policy, new labor law and new enterprise income tax law, as well as the Recycling Economic Law, which will directly impact recycling industry. How will those changes in policies influence recycling industry in the future?展开更多
文摘The composition and sequence distribution of monomeric units in polyester polyether multiblock copolymer were studied by pyrolysis? gas chromatography (PGC) and pyrolysis gas chromatography/mass spectrometry (PGC/MS). PGC was applied to study the F t curve of the multiblock copolymer and PGC/MS was used to separate and identify the pyrolyzates. DTA experiment was used to study the decomposition temperature. The results show that the beginning point of elastomer’s decomposition was about 300?℃ and the decomposition temperature of most of the sample was 550?℃. Many pyrolyzates were produced because of the breaking of weak bonds in the sample. The possible microstructure was verified and the pyrolysis pathway of the copolymer was investigated.
基金supported by National Natural Science Foundation of China (No.11075033)Mehler Engineered Products (Suzhou) Co. Ltd. of China
文摘Abstract A newly developed coaxial dielectric barrier discharge reactor with a length of 1000 mm at an atmospheric pressure was used for plasma treatment of polyester fiber cord in a roll-to-roll manner. In this reactor, swirling mixture gases of oxygen of about 1% and argon with a flow rate of 1.5 L/rain to 2.7 L/min ensured the gas usage sparing, discharge uniformity and efficient fiber surface modification. The water contact angle and surface morphology of the treated fiber were measured. The results show that the surface oxygenation is mainly responsible for the wettability improvement of the fiber cord when passing through the plasma zone at a linear speed of 3 m/min to 8 m/rain. The specimens of modified-polyester fiber reinforced rubber composite were also prepared for the interracial shear strength tests. Furthermore, the effect of adding oxygen into argon discharge on the fiber surface oxidation was correlated with optical emission spectroscopy. Finally, the effect of adding oxygen into argon discharge on the kinetic processes of the active species generation were also analyzed.
文摘To achieve an atmospheric pressure glow discharge（APGD）in air and modify the surface of polyester thread using plasma,the electric field distribution and discharge characteristics under different conditions were studied.We found that the region with a strong electric field,which was formed in a tiny gap between two electrodes constituting a line-line contact electrode structure,provided the initial electron for the entire discharge process.Thus,the discharge voltage was reduced.The dielectric barrier of the line-line contact electrodes can inhibit the generation of secondary electrons.Thus,the transient current pulse discharge was reduced significantly,and an APGD in air was achieved.We designed double layer line-line contact electrodes,which can generate the APGD on the surface of a material under treatment directly.A noticeable change in the surface morphology of polyester fiber was visualized with the aid of a scanning electron microscope（SEM）.Two electrode structures-the multi-row line-line and double-helix line-line contact electrodes-were designed.A large area of the APGD plasma with flat and curved surfaces can be formed in air using these contact electrodes.This can improve the efficiency of surface treatment and is significant for the application of the APGD plasma in industries.
基金Supported by the Specialized Research Project for LS17-2 Semi-submersible Production Platform(LSZX-2020-HN-05-0405).
文摘The taut mooring system using synthetic fiber ropes has overcome the shortcomings such as the large self-weight of the mooring lines and provides better mooring performance for the floating structures.The polyester rope has attracted much attention among numerous synthetic fiber rope materials due to its lightweight,low price,corrosion resistance,and high strength.Thus,the mooring characteristics of it are worth studying.Polyester mooring lines are flexible in deep water,when a marine structure is moored by them,the geometric nonlinearity such as large displacement,large stretch,and large bending deformation,and the material nonlinearity like viscoelastic of the polyester ropes become complex integrated problems to be studied.Considering the nonlinear phenomenon,the simulation and calculation of a polyester line were carried out by the absolute nodal coordinate formulation(ANCF)in this paper since the ANCF method has advantages in dealing with the significant deformation problems of the flexible structures.In addition,a chain mooring line was also simulated for comparison,and the results show that the polyester ropes reduce the self-weight of the mooring lines and provide sufficient mooring strength at the same time,and the nonlinear phenomenon of the polyester ropes is different from that of the chain mooring lines.
基金Supported by the National Natural Science Foundation of China under Grant No 10332020
文摘Carbonaceous nanomaterials such as carbon nanotubes （CNTs）, magnetic metal nanomaterials and semicon- ductor nanomaterials are superior candidates for microwave absorbers. Taking full advantage of the features of CNTs, nanophase cobalt and nanophase zinc oxide, whose main microwave absorption mechanisms are based on resistance loss, magnetic loss and dielectric loss, we fabricate CNT/Co and CNT/ZnO heterostructure nanocom- posites, respectively. By using the CNTs, CNT/Co nanocomposites and CNT/ZnO nanocomposites as nanofillers, composites with polyester as matrix are prepared by in situ polymerization, and their microwave absorption per- formance is studied. It is indicated that the synergetic effects of the physic properties of different components in nano-heterostructures result in greatly enhanced microwave absorption performance in a wide frequency range. The absorption peak is increased, the absorption bandwidth is broadened, and the maximum peak shifts to a lower frequency.
文摘Polyesters,such as polylactide(PLA),are a class of biodegra-dable and biocompatible polymers that have received increasing attention in biomedicine,agriculture,and commodity thermoplastics[1-2].However,the lack of pendant functionality of conventional polyesters makes it difficult to modify and modulate the physicochemical properties in subsequent applications[3-4].Since 2006[5],the ring-opening polymerization(ROP)of O-carbox-yanhydrides(OCAs),which can be readily synthesized from amino acid or hydroxyl acid precursors,has been recognized as a promising route to functionalized polyesters[3-4].However,due to the increased methine C-H acidity,significant racemization of the stereogenic center and decreased stereoregularity have been identified for most OCAs,for instance,ManOCA[6](OCA from mandelic acid)and SerOCA[7](OCA from serine),when using typical 4-(dimethylamino)pyridine(DMAP)as catalyst.To minimize epimerization,some classical metal-based catalysts of coordination polymerization have been introduced to mediate ROP of OCAs,furnishing isotactic polyesters[8].
文摘A series of biodegradable aliphatic-aromatic copolyesters, poly(butylene terephthalate-co-butylene adipate-co- ethylene terephthalate-co-ethylene adipate) (PBATE), were synthesized from terephthalic acid (PTA), adipic acid (AA), 1,4-butanediol (BG) and ethylene glycol (EG) through direct esterification and polycondensation. The sequence structure and crystallinity of the copolyester were investigated by 1H NMR spectroscopy and the wide-angle X-ray diffractometry (WAXD). The analytical results showed that the PBATE copolyester was a random copolymer and the composition of PBATE copolyester was almost consistent with the feed molar ratios. The crystal structure of PBATE copolyester belonged to the triclinic crystalline system; The variation in melting point of the synthesized PBATE copolyester agreed well with the estimation obtained by the Flory equation and was applicable to the random copolymer.
文摘In recent years, the domestic polyester industry filament production and technology continue to improve, the downstream application of products continues to expand. Especially in the application of high-end products, areas related to the automotive safety industry are outstanding.
文摘The global polyester resin dispersion market size is anticipated to reach a valuation of US$7,635.4 million by 2023.It is projected to witness a CAGR of 4.8%in the estimated time period from 2023 to 2033.A valuation of around US$12,200.7 million is predicted for the global market by 2033.
文摘According to Future Market Insights,the global nonwoven polyester fabric market is projected to increase at a CAGR of 6.84%in the forecast period from 2023 to 2033.The market size in 2023 is likely to reach US$54.8 billion and in 2033 it will reach US$106.2 billion.The market size in 2022 was US$51.31 billion.
文摘In 2008 there are many events taking place in China: tightened currency policy, new labor law and new enterprise income tax law, as well as the Recycling Economic Law, which will directly impact recycling industry. How will those changes in policies influence recycling industry in the future?
