In consideration of the problem that the effect of conduit structure on water hammer has been ignored in the classical theory,the Poisson coupling between the fluid and the pipeline was studied and a fourteen-equation...In consideration of the problem that the effect of conduit structure on water hammer has been ignored in the classical theory,the Poisson coupling between the fluid and the pipeline was studied and a fourteen-equation mathematical model of fluid-structure interaction(FSI)was developed.Then,the transfer matrix method(TMM)was used to calculate the modal frequency,modal shape and frequency response.The results were compared with that in experiment to verify the correctness of the TMM and the results show that the fluid-structure coupling has a greater impact on the modal frequencies than the modal shape.Finally,the influence on the response spectrum of different damping ratios was studied and the results show that the natural frequency under different damping ratios has changed little but there is a big difference for the pressure spectrum.With the decreasing of damping ratio,the damping of the system on frequency spectrum is more and more significant and the dispersion and dissipation is more and more apparent.Therefore the appropriate damping ratio should be selected to minimize the effects of the vibration of the FSI.The results provide references for the theory research of FSI in the transient process.展开更多
To examine the similarities and differences in the evolution of cavity,wetting and dynamics of a highspeed,oblique water-entry projectile with different positive angles of attack,a comparative analysis has been conduc...To examine the similarities and differences in the evolution of cavity,wetting and dynamics of a highspeed,oblique water-entry projectile with different positive angles of attack,a comparative analysis has been conducted based on the numerical results of two mathematical models,the rigid-body model and fluid-structure interaction model.In addition,the applicable scope of the above two methods,and the structural response characteristics of the projectile have also been investigated.Our results demonstrate that:(1) The impact loads and angular motion of the projectile of the rigid-body method are more likely to exhibit periodic variations due to the periodic tail slap,its range of positive angles of attack is about α<2°.(2) When the projectile undergone significant wetting,a strong coupling effect is observed among wetting,structural deformation,and projectile motion.With the applied projectile shape,it is observed that,when the projectile bends,the final wetting position is that of Part B(cylinder of body).With the occu rrence of this phenomenon,the projectile ballistics beco me completely unstable.(3) The force exerted on the lower surface of the projectile induced by wetting is the primary reason of the destabilization of the projectile traj ectory and structu ral deformation failure.Bending deformation is most likely to appear at the junction of Part C(cone of body) and Part D(tail).The safe angles of attack of the projectile stability are found to be about α≤2°.展开更多
The conventional honey production is dominated by fragmented,small-scale individual farming models.The traditional approach of honey-harvesting involving manual beehive frames extraction,beeswax layer excision and cen...The conventional honey production is dominated by fragmented,small-scale individual farming models.The traditional approach of honey-harvesting involving manual beehive frames extraction,beeswax layer excision and centrifugal honey separation,expose beekeepers to potential bee stings and frequently compromise honeycomb integrity.To address these limitations,we designed an automated honey-harvesting robot capable of autonomous frame extraction and beeswax removal.The robot mainly consists of a mobile mechanism equipped with image recognition for beehive localization,a magnetic adsorption-based beehive frame handling device(60.8 N maximum suction)coupled with a cross-slide mechanism for precise frame manipulation,and a thermal beeswax layer-melting apparatus,with optimal melting parameters(15 m/s airflow at 90℃ for 30 seconds)determined through rigorous thermal flow simulations utilizing FLUENT/Mechanical software.Field experiments demonstrated beehive frames handling success rate exceeding 85%,beeswax layer removal efficacy over 80% and damage of honeycombs below 30%.The experiment results validate the robot's operational reliability and its capacity to automate critical harvesting procedures.This study significantly reduces the labor intensity for beekeepers,effectively eliminates the risk of direct human-bee contact and improves the removal of beeswax layer,thereby catalyzing the modernization of the beekeeping industry.展开更多
While the moisture content of soil affects significantly the blast impulse of shallow buried explosives,the role of surface-covering water(SCW)on soil in such blast impulse remains elusive.A combined experimental and ...While the moisture content of soil affects significantly the blast impulse of shallow buried explosives,the role of surface-covering water(SCW)on soil in such blast impulse remains elusive.A combined experimental and numerical study has been carried out to characterize the effect of SCW on transferred impulse and loading magnitude of shallow buried explosives.Firstly,blast tests of shallow buried explosives were conducted,with and without the SCW,to quantitatively assess the blast loading impulse.Subsequently,finite element(FE)simulations were performed and validated against experimental measurement,with good agreement achieved.The validated FE model was then employed to predict the dynamic response of a fully-clamped metallic circular target,subjected to the explosive impact of shallow buried explosives with SCW,and explore the corresponding physical mechanisms.It was demonstrated that shallow buried explosives in saturated soil generate a greater impulse transferred towards the target relative to those in dry soil.The deformation displacement of the target plate is doubled.Increasing the height of SCW results in enhanced center peak deflection of the loaded target,accompanied by subsequent fall,due to the variation of deformation pattern of the loaded target from concentrated load to uniform load.Meanwhile,the presence of SCW increases the blast impulse transferred towards the target by three times.In addition,there exists a threshold value of the burial depth that maximizes the impact impulse.This threshold exhibits a strong sensitivity to SCW height,decreasing with increasing SCW height.An empirical formula for predicting threshold has been provided.Similar conclusions can be drawn for different explosive masses.The results provide technical guidance on blast loading intensity and its spatial distribution considering shallow buried explosives in coast-land battlefields,which can ultimately contribute to better protective designs.展开更多
Hydraulic cylinder is a primary component of the hydraulic valve systems.The numerical study of hydraulic cylinder to evaluate the stress analysis,the life assessment and the performance of operation characteristics i...Hydraulic cylinder is a primary component of the hydraulic valve systems.The numerical study of hydraulic cylinder to evaluate the stress analysis,the life assessment and the performance of operation characteristics in hydraulic cylinder were described.The calculation of safety factor,fatigue life,piston chamber pressure,rod chamber pressure and the change of velocity of piston with flow time after the beginning of hydraulic cylinder were incorporated.Numerical analysis was performed using the commercial CFD code,ANSYS with unsteady,dynamic mesh model,two-way FSI(fluid-structure interaction)method and k-εturbulent model.The internal pressure in hydraulic cylinder through stress analysis show higher than those of the yield strength.展开更多
Single-layer reticulated dome structure are commonly high-profile building in the public and can be attractive targets for terrorist bombings,so the public can benefit from enhanced safety with a stronger understandin...Single-layer reticulated dome structure are commonly high-profile building in the public and can be attractive targets for terrorist bombings,so the public can benefit from enhanced safety with a stronger understanding of the behavior of single-layer reticulated dome structure under explosion.This paper investigates the fluid-structure interaction process and the dynamic response performance of the singlelayer reticulated dome under external blast load.Both experimental and numerical results shown that structural deformation is remarkably delayed compared with the velocity of blast wave,which advises the dynamic response of large-span reticulated dome structure has a negligible effect on the blast wave propagation under explosion.Four failure modes are identified by comparing the plastic development of each ring and the residual spatial geometric of the structure,i.e.,minor vibration,local depression,severe damage,and overall collapse.The plastic deformation energy and the displacement potential energy of the structure are the main consumers of the blast energy.In addition,the stress performance of the vertex member and the deep plastic ratio of the whole structure can serve as qualitative indicators to distinguish different failure modes.展开更多
Plaque erosion,together with plaque rupture,is a common cause for acute coronary syndrome(ACS).Plaque erosion alone is responsible for about one third of the patients with ACS.Eroded plaque is defined as thrombosed,en...Plaque erosion,together with plaque rupture,is a common cause for acute coronary syndrome(ACS).Plaque erosion alone is responsible for about one third of the patients with ACS.Eroded plaque is defined as thrombosed,endothelium-absent and non-ruptured but often-inflamed plaques based on histological findings.Even though there is efficient imaging technologies to detect the eroded plaque in vivo and tailored treatment strategy has also been developed for ACScaused by erosion in clinics,the pathogenesis mechanisms that cause plaque erosion are not fully understood.It is widely postulated that thrombus formation and endothelial apoptosis(the precursors of plaque erosion)have closed association with biomechanical conditions in the coronary vessel.Revealing of the mechanical conditions in the eroded plaque could advance our knowledge in understanding the formation of plaque erosion.To this end,patient-specific OCT-based fluid-structure interaction(FSI)models were developed to investigate the plaque biomechanical conditions and investigate the impact of erosioninduced inflammation on biomechanical conditions.In vivo OCTand Biplane X-ray angiographic data of eroded coronary plaque were acquired from one male patient(age:64). OCT images were segmented manually with external elastic membrane contour and the trailing edge of the lipid-rich necrotic core(lipid)assumed to have positive remodeling ratio 1.1.Locations with luminal surface having direct contact with intraluminal thrombus on OCT images were identified erosion sites.Fusion of OCT and biplane X-ray angiographic data were performed to obtain the 3D coronary geometry.OCT-based FSI models with pre-shrink-stretch process and anisotropic material properties were constructed following previously established procedures.To reflect tissue weakening caused by erosion-induced inflammation,the material stiffness of plaque intima at the erosion site was adjust to one tenth of un-eroded fibrous plaque tissue.Three FSI models were constructed to investigate the impacts of inflammation and lipid component on plaque biomechanics:M1,without erosion(this means plaque intima at the erosion sites were not softened)and without inclusion of lipid component;M2,with erosion but no lipid;M3,with erosion and inclusion of lipid.FSI models were solved by ADINA to obtain the biomechanical conditions at peak blood pressure including plaque wall stress/strain(PWS/PWSn)and flow wall shear stress(WSS).The average values of three biomechanical conditions at the erosion sites and at the fibrous cap overlaying lipid component were calculated from three models for analysis.The results of M1 and M2 were compared to investigate the impact of erosion-induced inflammation on plaque biomechanics.Mean PWS value decreases from 49.98 kPa to 18.83 kPa(62.32%decrease)while Mean PWSn value increases from 0.123 1 to 0.138 4(12%increase)as the material stiffness becomes 10times soft.Comparing M2 and M3 at the cap sites,M3(with inclusion of lipid)will elevates mean PWS and PWSn values by48.59%and 16.09%,respectively.The impacts of erosion and lipid on flow shear stress were limited(<2%).To conclude,erosion-induced inflammation would lead to lower stress distribution but larger strain distribution,while lipid would elevate both stress and strain conditions.This shows the influence of erosion and lipid component has impacts on stress/strain cal-culations which are closely related to plaque assessment.展开更多
In this study,based on a closed bomb test combined with computational fluid dynamics,a structural finite element method,and an acoustic boundary element method,a fluid-solid acoustic one-way coupling calculation model...In this study,based on a closed bomb test combined with computational fluid dynamics,a structural finite element method,and an acoustic boundary element method,a fluid-solid acoustic one-way coupling calculation model is established for the combustion process of energetic materials in a closed bomb,and the effectiveness of the model is verified by experiments.It is found that the maximum peak sound pressure increases exponentially with an increase in loading doses or gas pressure.However,a change in the combustion coefficient of the energetic materials has little effect on the noise generated during the combustion process in the closed bomb.When the combustion coefficient is reduced by a multiple of 16,the maximum transient sound pressure is reduced by 1.79 dB,and the sound pressure level in the frequency band is reduced by 1.75 dB.With an increase in shell thickness,the combustion noise of the energetic materials in the closed bomb decreases,and the reduction range of the combustion noise increases with the increase in shell thickness.展开更多
Dynamics and vibration of control valves under flow-induced vibration are analyzed. Hydrodynamic load characteristics and structural response under flow-induced vibration are mainly influenced by inertia, damping, ela...Dynamics and vibration of control valves under flow-induced vibration are analyzed. Hydrodynamic load characteristics and structural response under flow-induced vibration are mainly influenced by inertia, damping, elastic, geometric characteristics and hydraulic parameters. The purpose of this work is to investigate the dynamic behavior of control valves in the response to self-excited fluid flow. An analytical and numerical method is developed to simulate the dynamic and vibrational behavior of sliding dam valves, in response to flow excitation. In order to demonstrate the effectiveness of proposed model, the simulation results are validated with experimental ones. Finally, to achieve the optimal valve geometry, numerical results for various shapes of valves are compared. Rounded valve with the least amount of flow turbulence obtains lower fluctuations and vibration amplitude compared with the flat and steep valves. Simulation results demonstrate that with the optimal design requirements of valves, vibration amplitude can be reduced by an average to 30%.展开更多
文摘In consideration of the problem that the effect of conduit structure on water hammer has been ignored in the classical theory,the Poisson coupling between the fluid and the pipeline was studied and a fourteen-equation mathematical model of fluid-structure interaction(FSI)was developed.Then,the transfer matrix method(TMM)was used to calculate the modal frequency,modal shape and frequency response.The results were compared with that in experiment to verify the correctness of the TMM and the results show that the fluid-structure coupling has a greater impact on the modal frequencies than the modal shape.Finally,the influence on the response spectrum of different damping ratios was studied and the results show that the natural frequency under different damping ratios has changed little but there is a big difference for the pressure spectrum.With the decreasing of damping ratio,the damping of the system on frequency spectrum is more and more significant and the dispersion and dissipation is more and more apparent.Therefore the appropriate damping ratio should be selected to minimize the effects of the vibration of the FSI.The results provide references for the theory research of FSI in the transient process.
基金supported by the Postgraduate Research&Practice Innovation Program of Jiangsu Province(Grant No.KYCX24_0714).
文摘To examine the similarities and differences in the evolution of cavity,wetting and dynamics of a highspeed,oblique water-entry projectile with different positive angles of attack,a comparative analysis has been conducted based on the numerical results of two mathematical models,the rigid-body model and fluid-structure interaction model.In addition,the applicable scope of the above two methods,and the structural response characteristics of the projectile have also been investigated.Our results demonstrate that:(1) The impact loads and angular motion of the projectile of the rigid-body method are more likely to exhibit periodic variations due to the periodic tail slap,its range of positive angles of attack is about α<2°.(2) When the projectile undergone significant wetting,a strong coupling effect is observed among wetting,structural deformation,and projectile motion.With the applied projectile shape,it is observed that,when the projectile bends,the final wetting position is that of Part B(cylinder of body).With the occu rrence of this phenomenon,the projectile ballistics beco me completely unstable.(3) The force exerted on the lower surface of the projectile induced by wetting is the primary reason of the destabilization of the projectile traj ectory and structu ral deformation failure.Bending deformation is most likely to appear at the junction of Part C(cone of body) and Part D(tail).The safe angles of attack of the projectile stability are found to be about α≤2°.
基金National Natural Science Foundation of China(31700644)Shandong Province Postdoctoral Innovation Project(SDCX-ZG-202400195)。
文摘The conventional honey production is dominated by fragmented,small-scale individual farming models.The traditional approach of honey-harvesting involving manual beehive frames extraction,beeswax layer excision and centrifugal honey separation,expose beekeepers to potential bee stings and frequently compromise honeycomb integrity.To address these limitations,we designed an automated honey-harvesting robot capable of autonomous frame extraction and beeswax removal.The robot mainly consists of a mobile mechanism equipped with image recognition for beehive localization,a magnetic adsorption-based beehive frame handling device(60.8 N maximum suction)coupled with a cross-slide mechanism for precise frame manipulation,and a thermal beeswax layer-melting apparatus,with optimal melting parameters(15 m/s airflow at 90℃ for 30 seconds)determined through rigorous thermal flow simulations utilizing FLUENT/Mechanical software.Field experiments demonstrated beehive frames handling success rate exceeding 85%,beeswax layer removal efficacy over 80% and damage of honeycombs below 30%.The experiment results validate the robot's operational reliability and its capacity to automate critical harvesting procedures.This study significantly reduces the labor intensity for beekeepers,effectively eliminates the risk of direct human-bee contact and improves the removal of beeswax layer,thereby catalyzing the modernization of the beekeeping industry.
基金supported by the National Natural Science Foundation of China(Grant Nos.12002156,11972185,12372136)Research Fund of State Key Laboratory of Mechanics and Control for Aerospace Structures(Grant No.MCMS-I-0222K01)。
文摘While the moisture content of soil affects significantly the blast impulse of shallow buried explosives,the role of surface-covering water(SCW)on soil in such blast impulse remains elusive.A combined experimental and numerical study has been carried out to characterize the effect of SCW on transferred impulse and loading magnitude of shallow buried explosives.Firstly,blast tests of shallow buried explosives were conducted,with and without the SCW,to quantitatively assess the blast loading impulse.Subsequently,finite element(FE)simulations were performed and validated against experimental measurement,with good agreement achieved.The validated FE model was then employed to predict the dynamic response of a fully-clamped metallic circular target,subjected to the explosive impact of shallow buried explosives with SCW,and explore the corresponding physical mechanisms.It was demonstrated that shallow buried explosives in saturated soil generate a greater impulse transferred towards the target relative to those in dry soil.The deformation displacement of the target plate is doubled.Increasing the height of SCW results in enhanced center peak deflection of the loaded target,accompanied by subsequent fall,due to the variation of deformation pattern of the loaded target from concentrated load to uniform load.Meanwhile,the presence of SCW increases the blast impulse transferred towards the target by three times.In addition,there exists a threshold value of the burial depth that maximizes the impact impulse.This threshold exhibits a strong sensitivity to SCW height,decreasing with increasing SCW height.An empirical formula for predicting threshold has been provided.Similar conclusions can be drawn for different explosive masses.The results provide technical guidance on blast loading intensity and its spatial distribution considering shallow buried explosives in coast-land battlefields,which can ultimately contribute to better protective designs.
基金supported by the International Cooperation on Technology Development Program of the Korea Institute for Advancement of Technology ( KIAT),Republic of Korea ( N0000902)
文摘Hydraulic cylinder is a primary component of the hydraulic valve systems.The numerical study of hydraulic cylinder to evaluate the stress analysis,the life assessment and the performance of operation characteristics in hydraulic cylinder were described.The calculation of safety factor,fatigue life,piston chamber pressure,rod chamber pressure and the change of velocity of piston with flow time after the beginning of hydraulic cylinder were incorporated.Numerical analysis was performed using the commercial CFD code,ANSYS with unsteady,dynamic mesh model,two-way FSI(fluid-structure interaction)method and k-εturbulent model.The internal pressure in hydraulic cylinder through stress analysis show higher than those of the yield strength.
基金financial support from the China Postdoctora Science Foundation(project No.2021M690406)financial supports from the National Natural Science Foundation of China(project No.51708521,51778183)。
文摘Single-layer reticulated dome structure are commonly high-profile building in the public and can be attractive targets for terrorist bombings,so the public can benefit from enhanced safety with a stronger understanding of the behavior of single-layer reticulated dome structure under explosion.This paper investigates the fluid-structure interaction process and the dynamic response performance of the singlelayer reticulated dome under external blast load.Both experimental and numerical results shown that structural deformation is remarkably delayed compared with the velocity of blast wave,which advises the dynamic response of large-span reticulated dome structure has a negligible effect on the blast wave propagation under explosion.Four failure modes are identified by comparing the plastic development of each ring and the residual spatial geometric of the structure,i.e.,minor vibration,local depression,severe damage,and overall collapse.The plastic deformation energy and the displacement potential energy of the structure are the main consumers of the blast energy.In addition,the stress performance of the vertex member and the deep plastic ratio of the whole structure can serve as qualitative indicators to distinguish different failure modes.
基金supported in part by NSFC ( 11672001,11802060)Jiangsu NSF ( BK20180352)Jiangsu Province Science and Technology Agency ( BE2016785)
文摘Plaque erosion,together with plaque rupture,is a common cause for acute coronary syndrome(ACS).Plaque erosion alone is responsible for about one third of the patients with ACS.Eroded plaque is defined as thrombosed,endothelium-absent and non-ruptured but often-inflamed plaques based on histological findings.Even though there is efficient imaging technologies to detect the eroded plaque in vivo and tailored treatment strategy has also been developed for ACScaused by erosion in clinics,the pathogenesis mechanisms that cause plaque erosion are not fully understood.It is widely postulated that thrombus formation and endothelial apoptosis(the precursors of plaque erosion)have closed association with biomechanical conditions in the coronary vessel.Revealing of the mechanical conditions in the eroded plaque could advance our knowledge in understanding the formation of plaque erosion.To this end,patient-specific OCT-based fluid-structure interaction(FSI)models were developed to investigate the plaque biomechanical conditions and investigate the impact of erosioninduced inflammation on biomechanical conditions.In vivo OCTand Biplane X-ray angiographic data of eroded coronary plaque were acquired from one male patient(age:64). OCT images were segmented manually with external elastic membrane contour and the trailing edge of the lipid-rich necrotic core(lipid)assumed to have positive remodeling ratio 1.1.Locations with luminal surface having direct contact with intraluminal thrombus on OCT images were identified erosion sites.Fusion of OCT and biplane X-ray angiographic data were performed to obtain the 3D coronary geometry.OCT-based FSI models with pre-shrink-stretch process and anisotropic material properties were constructed following previously established procedures.To reflect tissue weakening caused by erosion-induced inflammation,the material stiffness of plaque intima at the erosion site was adjust to one tenth of un-eroded fibrous plaque tissue.Three FSI models were constructed to investigate the impacts of inflammation and lipid component on plaque biomechanics:M1,without erosion(this means plaque intima at the erosion sites were not softened)and without inclusion of lipid component;M2,with erosion but no lipid;M3,with erosion and inclusion of lipid.FSI models were solved by ADINA to obtain the biomechanical conditions at peak blood pressure including plaque wall stress/strain(PWS/PWSn)and flow wall shear stress(WSS).The average values of three biomechanical conditions at the erosion sites and at the fibrous cap overlaying lipid component were calculated from three models for analysis.The results of M1 and M2 were compared to investigate the impact of erosion-induced inflammation on plaque biomechanics.Mean PWS value decreases from 49.98 kPa to 18.83 kPa(62.32%decrease)while Mean PWSn value increases from 0.123 1 to 0.138 4(12%increase)as the material stiffness becomes 10times soft.Comparing M2 and M3 at the cap sites,M3(with inclusion of lipid)will elevates mean PWS and PWSn values by48.59%and 16.09%,respectively.The impacts of erosion and lipid on flow shear stress were limited(<2%).To conclude,erosion-induced inflammation would lead to lower stress distribution but larger strain distribution,while lipid would elevate both stress and strain conditions.This shows the influence of erosion and lipid component has impacts on stress/strain cal-culations which are closely related to plaque assessment.
文摘In this study,based on a closed bomb test combined with computational fluid dynamics,a structural finite element method,and an acoustic boundary element method,a fluid-solid acoustic one-way coupling calculation model is established for the combustion process of energetic materials in a closed bomb,and the effectiveness of the model is verified by experiments.It is found that the maximum peak sound pressure increases exponentially with an increase in loading doses or gas pressure.However,a change in the combustion coefficient of the energetic materials has little effect on the noise generated during the combustion process in the closed bomb.When the combustion coefficient is reduced by a multiple of 16,the maximum transient sound pressure is reduced by 1.79 dB,and the sound pressure level in the frequency band is reduced by 1.75 dB.With an increase in shell thickness,the combustion noise of the energetic materials in the closed bomb decreases,and the reduction range of the combustion noise increases with the increase in shell thickness.
文摘Dynamics and vibration of control valves under flow-induced vibration are analyzed. Hydrodynamic load characteristics and structural response under flow-induced vibration are mainly influenced by inertia, damping, elastic, geometric characteristics and hydraulic parameters. The purpose of this work is to investigate the dynamic behavior of control valves in the response to self-excited fluid flow. An analytical and numerical method is developed to simulate the dynamic and vibrational behavior of sliding dam valves, in response to flow excitation. In order to demonstrate the effectiveness of proposed model, the simulation results are validated with experimental ones. Finally, to achieve the optimal valve geometry, numerical results for various shapes of valves are compared. Rounded valve with the least amount of flow turbulence obtains lower fluctuations and vibration amplitude compared with the flat and steep valves. Simulation results demonstrate that with the optimal design requirements of valves, vibration amplitude can be reduced by an average to 30%.
