The formation mechanism of an EFP(explosively formed projectile)using a double curvature liner under the overpressure effect generated by a regular oblique reflection was investigated in this paper.Based on the detona...The formation mechanism of an EFP(explosively formed projectile)using a double curvature liner under the overpressure effect generated by a regular oblique reflection was investigated in this paper.Based on the detonation wave propagation theory,the change of the incident angle of the detonation wave collision at different positions and the distribution area of the overpressure on the surface of the liner were calculated.Three dimensional numerical simulations of the formation process of the EFP with tail.as well as the ability to penetrate 45#steel were performed using LS-DYNA software,and the EFP ve locity,the penetration ability,and the forming were assessed via experiments and x_ray photographs.The experimental results coincides with those of the simulations.Results indicate that the collision of the detonation wave was controlled to be a regular oblique reflection acting on the liner by setting the di-mensions of the unit charge and maintai ning the pressure at the collision point region at more than 2.4 times the CJ detonation when the incident angle approached the cnitical angle.The distance from the liner midline to the boundary of the area within which the pressure ratio of the regular oblique reflection pressure to the qJ detonation pressure was greater than 2.5,2,and 15was approximately 0.66 mm,132 mm,and 3.3 mm,respectively.Itis noted that pressure gradient caused the liner to turn inside out in the middle to form the head of the EFP and close the two tails of the EFP at approximately 120μs.The penetration depth of the EFP into a 45#steel target exceeded 30 mm,and there was radial expansion between the head and tail of the EFP,increasing the penetration resistance of the EFP.Therefore,the structural size of the unit charge and the liner can be further optimized to reduce resist ance to increase the penetration ability of the EFP.展开更多
基金The work presented in this paper has been supported by the science foundation(YT20-01-02)of Nanjing Vocational University of Industry Technology and the National Science Foundation of China under NO.11802141.
文摘The formation mechanism of an EFP(explosively formed projectile)using a double curvature liner under the overpressure effect generated by a regular oblique reflection was investigated in this paper.Based on the detonation wave propagation theory,the change of the incident angle of the detonation wave collision at different positions and the distribution area of the overpressure on the surface of the liner were calculated.Three dimensional numerical simulations of the formation process of the EFP with tail.as well as the ability to penetrate 45#steel were performed using LS-DYNA software,and the EFP ve locity,the penetration ability,and the forming were assessed via experiments and x_ray photographs.The experimental results coincides with those of the simulations.Results indicate that the collision of the detonation wave was controlled to be a regular oblique reflection acting on the liner by setting the di-mensions of the unit charge and maintai ning the pressure at the collision point region at more than 2.4 times the CJ detonation when the incident angle approached the cnitical angle.The distance from the liner midline to the boundary of the area within which the pressure ratio of the regular oblique reflection pressure to the qJ detonation pressure was greater than 2.5,2,and 15was approximately 0.66 mm,132 mm,and 3.3 mm,respectively.Itis noted that pressure gradient caused the liner to turn inside out in the middle to form the head of the EFP and close the two tails of the EFP at approximately 120μs.The penetration depth of the EFP into a 45#steel target exceeded 30 mm,and there was radial expansion between the head and tail of the EFP,increasing the penetration resistance of the EFP.Therefore,the structural size of the unit charge and the liner can be further optimized to reduce resist ance to increase the penetration ability of the EFP.
