Instead of the capillary plasma generator(CPG),a discharge rod plasma generator(DRPG)is used in the30 mm electrothermal-chemical(ETC)gun to improve the ignition uniformity of the solid propellant.An axisymmetric two-d...Instead of the capillary plasma generator(CPG),a discharge rod plasma generator(DRPG)is used in the30 mm electrothermal-chemical(ETC)gun to improve the ignition uniformity of the solid propellant.An axisymmetric two-dimensional interior ballistics model of the solid propellant ETC gun(2D-IB-SPETCG)is presented to describe the process of the ETC launch.Both calculated pressure and projectile muzzle velocity accord well with the experimental results.The feasibility of the 2D-IB-SPETCG model is proved.Depending on the experimental data and initial parameters,detailed distribution of the ballistics parameters can be simulated.With the distribution of pressure and temperature of the gas phase and the propellant,the influence of plasma during the ignition process can be analyzed.Because of the radial flowing plasma,the propellant in the area of the DRPG is ignited within 0.01 ms,while all propellant in the chamber is ignited within 0.09 ms.The radial ignition delay time is much less than the axial delay time.During the ignition process,the radial pressure difference is less than 5 MPa at the place 0.025 m away from the breech.The radial ignition uniformity is proved.The temperature of the gas increases from several thousand K(conventional ignition)to several ten thousand K(plasma ignition).Compare the distribution of the density and temperature of the gas,we know that low density and high temperature gas appears near the exits of the DRPG,while high density and low temperature gas appears at the wall near the breech.The simulation of the 2D-IB-SPETCG model is an effective way to investigate the interior ballistics process of the ETC launch.The 2D-IB-SPETC model can be used for prediction and improvement of experiments.展开更多
Classical network reliability problems assume both net- works and components have only binary states, fully working or fully failed states. But many actual networks are multi-state, such as communication networks and ...Classical network reliability problems assume both net- works and components have only binary states, fully working or fully failed states. But many actual networks are multi-state, such as communication networks and transportation networks. The nodes and arcs in the networks may be in intermediate states which are not fully working either fully failed. A simulation ap- proach for computing the two-terminal reliability of a multi-state network is described. Two-terminal reliability is defined as the probability that d units of demand can be supplied from the source to sink nodes under the time threshold T. The capacities of arcs may be in a stochastic state following any discrete or continuous distribution. The transmission time of each arc is also not a fixed number but stochastic according to its current capacity and de- mand. To solve this problem, a capacitated stochastic coloured Petri net is proposed for modelling the system behaviour. Places and transitions respectively stand for the nodes and arcs of a net- work. Capacitated transition and self-modified token colour with route information are defined to describe the multi-state network. By the simulation, the two-terminal reliability and node importance can be estimated and the optimal route whose reliability is highest can also be given. Finally, two examples of different kinds of multi- state networks are given.展开更多
An event-triggered scheme is proposed to solve the problems of robust guaranteed cost control for a class of two-dimensional(2-D)discrete-time systems.Firstly,an eventtriggered scheme is proposed for 2-D discrete-time...An event-triggered scheme is proposed to solve the problems of robust guaranteed cost control for a class of two-dimensional(2-D)discrete-time systems.Firstly,an eventtriggered scheme is proposed for 2-D discrete-time systems with parameter uncertainties and sector nonlinearities.Then,according to the Lyapunov functional method,the sufficient conditions for the existence of event-triggered robust guaranteed cost controller for 2-D discrete-time systems with parameter uncertainties and sector nonlinearities are given.Furthermore,based on the sufficient conditions and the linear matrix inequality(LMI)technique,the problem of designing event-triggered robust guaranteed cost controller is transformed into a feasible solution problem of LMI.Finally,a numerical example is given to demonstrate that,under the proposed event-triggered robust guaranteed cost control,the closed-loop system is asymptotically stable and fewer communication resources are occupied.展开更多
The analytic solution of the magnetotelluric fields for an idealized 2-D model which is composed of two segments with diagonal anisotropy underlain by aperfect insulator basement is considered using aquasi-static anal...The analytic solution of the magnetotelluric fields for an idealized 2-D model which is composed of two segments with diagonal anisotropy underlain by aperfect insulator basement is considered using aquasi-static analytic approach.The analytic magnetotelluric responses for a particular model are presented.The resulting analytic solution could be used to check the numerical solutions given by numerical algorithms before more complex situations are investigated.展开更多
Synthesis of ultra-wideband （UWB） linear frequency modulation radar signals is a very important technology for microwave imaging, target identification and detection of low radar-cross-section （RCS） targets. A new...Synthesis of ultra-wideband （UWB） linear frequency modulation radar signals is a very important technology for microwave imaging, target identification and detection of low radar-cross-section （RCS） targets. A new method of UWB radar signals generation with two-channel signal generator is presented. The realization structure is given; the principle and errors of signal synthesis are analyzed. At the same time, an automatic .adjustment measure of signal phase is proposed because of phase discontinuity of waveform in this method. The simulation experiment and analysis results indicate that radar signals with large instantaneous bandwidth can be generated by means of this method on the condition that the high-speed digital devices are limited.展开更多
Streamline simulation is developed to simulate waterflooding in fractured reservoirs. Conventional reservoir simulation methods for fluid flow simulation in large and complex reservoirs are very costly and time consum...Streamline simulation is developed to simulate waterflooding in fractured reservoirs. Conventional reservoir simulation methods for fluid flow simulation in large and complex reservoirs are very costly and time consuming. In streamline method, transport equations are solved on one-dimensional streamlines to reduce the computation time with less memory for simulation. First, pressure equation is solved on an Eulerian grid and streamlines are traced. Defining the "time of flight", saturation equations are mapped and solved on streamlines. Finally, the results are mapped back on Eulerian grid and the process is repeated until the simulation end time. The waterflooding process is considered in a fractured reservoir using the dual porosity model. Afterwards, a computational code is developed to solve the same problem by the IMPES method and the results of streamline simulation are compared to those of the IMPES and a commercial software. Finally, the accuracy and efficiency of streamline simulator for simulation of two-phase flow in fractured reservoirs has been proved.展开更多
A new two-iteration sculling compensation mathematical framework is provided for modern-day strapdown inertial navigation system（SINS） algorithm design that utilizes a new concept in velocity updating. The principal...A new two-iteration sculling compensation mathematical framework is provided for modern-day strapdown inertial navigation system（SINS） algorithm design that utilizes a new concept in velocity updating. The principal structure of this framework includes twice sculling compensation procedure using incremental outputs from the inertial system sensors during the velocity updating interval. Then, the moderate algorithm is designed to update the velocity parameter. The analysis is conducted in the condition of sculling motion which indicates that the new mathematical framework error which is smaller than the conventional ones by at least two orders is far superior. Therefore, a summary is given for SINS software which can be designed with the new mathematical framework in velocity updating.展开更多
The method of two-dimensional viscous space-time conservation element and solution element (CE/SE) can be used to calculate the gas-liquid two-phase interior flow field in pulse detonation engine (PDE). In this paper,...The method of two-dimensional viscous space-time conservation element and solution element (CE/SE) can be used to calculate the gas-liquid two-phase interior flow field in pulse detonation engine (PDE). In this paper, the evolution of the detonation wave and the distribution of its physical parameters were analyzed. The numerical results show that the change of axial velocity of gas is the same as that of detonation pressure. The larger the liquid droplet radius is, the longer the time to get stable detonation wave is. The calculated results coincide with the experimented results better.展开更多
Plate shaped sandstones containing two fabricated circular holes that were filled with gypsum and high-strength concrete respectively were prepared for studying the effects of ligament length L ligament incline angle ...Plate shaped sandstones containing two fabricated circular holes that were filled with gypsum and high-strength concrete respectively were prepared for studying the effects of ligament length L ligament incline angle α, as well as filling modes on their strength properties and failure modes. The results show that the initial cracks can be categorized as wing crack, axial tensile crack and curved tensile crack. The failure modes of ligaments can be categorized as mode of single inclined crack, mode of single axial crack and mode of two parallel cracks. The final failure modes of all specimens can be categorized as the tension-shear mixed failure and shear failure. The strength of inclusions shows little influence on the final failure modes of specimens, while the failure modes vary with L and α. When α is a fixed value, the peak strength σc and elastic modulus Ec of tested specimens increase firstly with increasing L and reaches to the maximum value at L of 16 mm, then declines. When L is a fixed value, σc declines firstly and then turns to increase as α increases to 75° from 45°, while Ec increases linearly. The axial stress σp performs the similar variation trends with those of σc versus increasing L and α when ligaments fail.展开更多
Traditional monopulse radar cannot resolve two targets present in one range and Doppler cell by means of the monopulse ratio. A novel algorithm is proposed to estimate the directions of two steady targets with two pul...Traditional monopulse radar cannot resolve two targets present in one range and Doppler cell by means of the monopulse ratio. A novel algorithm is proposed to estimate the directions of two steady targets with two pulses. The algorithm has a closedform expression and its variance is derived at high signal-to-noise ratios（SNRs）. Furthermore, the pulse pair selection criterion and the estimation method with multiple pulses are given. Finally, some numerical results are shown to validate the proposed algorithm and the effect of slight target fluctuations is tested.展开更多
The overwintering survival ratio of the cultivar Dongnongdongmai 1 with strong cold-resistance in paramos of Heilongjiang Province in China are over 85%. The tillering nodes are the most important organs for overwinte...The overwintering survival ratio of the cultivar Dongnongdongmai 1 with strong cold-resistance in paramos of Heilongjiang Province in China are over 85%. The tillering nodes are the most important organs for overwintering survival of winter wheat, because there are more substances associated with cold resistance in tillering nodes than those in leaves and roots. Proteins in the tillering nodes of the cold-resistant cultivar Dongnongdongmai 1 grown under field conditions with or without any lowtemperature stress were analyzed by 2-dimensional electrophoresis and identified by mass spectrometry. In the range of pH 4-7, the expression of 37 proteins showed obvious difference （±more than two fold） in the proteomic maps of cold-stressed and non-stressed tillering nodes, including a new protein spot. All proteins exhibiting the difference in expression were identified using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry, followed by a database search for protein identification and function prediction. Five groups of proteins were confirmed, namely stress-related proteins （22%）, metabolism-associated proteins （35%）, and signaling molecules （24%）, cell wall-binding proteins （5%）, unclear proteins （14%）. This indicated that tillering node cells supported the energy requirements of plant growth and stress resistance by signal transduction adapting to metabolism and structure.展开更多
Previous studies have indicated that piping erosion greatly threatens the safe operation of various hydraulic structures. However, few mathematical models are available to perfectly describe the erosion process due to...Previous studies have indicated that piping erosion greatly threatens the safe operation of various hydraulic structures. However, few mathematical models are available to perfectly describe the erosion process due to the complexity of piping. The focus of the present work is to propose a new fluid solid coupling model to eliminate the shortcomings of existing work. A 'pseudo-liquid' assumption is suggested to simulate the particle movement in the erosion process. Then, based on the mass and momentum conservations of the moving particles and flowing water, a new two-flow model is established by using the continuity equations and motion equations. In the model, the erosion rate of soil is determined with a particle erosion law derived from tests results of STERPI. And ERGUN's empirical equation is used to determine the interaction forces between the liquid and the solid. A numerical approach is proposed to solve the model with the finite volume method and SIMPLE algorithm. The new model is validated with the tests results of STERPI. And the soil erosion principles in piping are also explored.展开更多
A joint power control and relay selection scheme is considered for a cooperative and cognitive radio system where a secondary network shares spectrum with the primary network. In the secondary network, two secondary u...A joint power control and relay selection scheme is considered for a cooperative and cognitive radio system where a secondary network shares spectrum with the primary network. In the secondary network, two secondary users （SUs） communicate with each other via an assist relay. The main point is to provide the best system performance to SUs while maintaining the interference power at primary user （PU） under a certain level. Using convex optimization, a closed-form solution is obtained when optimizing the power allocation among the two nodes and relay. Based on this result, a joint power control and relay selection scheme with fewer variable dimensions is proposed to maximize the achievable rate of the secondary system. Simulation results demonstrate that the sum rate of the cognitive two-way relay network increases compared with a random relay selection and fixed power allocation.展开更多
文摘Instead of the capillary plasma generator(CPG),a discharge rod plasma generator(DRPG)is used in the30 mm electrothermal-chemical(ETC)gun to improve the ignition uniformity of the solid propellant.An axisymmetric two-dimensional interior ballistics model of the solid propellant ETC gun(2D-IB-SPETCG)is presented to describe the process of the ETC launch.Both calculated pressure and projectile muzzle velocity accord well with the experimental results.The feasibility of the 2D-IB-SPETCG model is proved.Depending on the experimental data and initial parameters,detailed distribution of the ballistics parameters can be simulated.With the distribution of pressure and temperature of the gas phase and the propellant,the influence of plasma during the ignition process can be analyzed.Because of the radial flowing plasma,the propellant in the area of the DRPG is ignited within 0.01 ms,while all propellant in the chamber is ignited within 0.09 ms.The radial ignition delay time is much less than the axial delay time.During the ignition process,the radial pressure difference is less than 5 MPa at the place 0.025 m away from the breech.The radial ignition uniformity is proved.The temperature of the gas increases from several thousand K(conventional ignition)to several ten thousand K(plasma ignition).Compare the distribution of the density and temperature of the gas,we know that low density and high temperature gas appears near the exits of the DRPG,while high density and low temperature gas appears at the wall near the breech.The simulation of the 2D-IB-SPETCG model is an effective way to investigate the interior ballistics process of the ETC launch.The 2D-IB-SPETC model can be used for prediction and improvement of experiments.
基金supported by the National Natural Science Foundation of China (70971132)
文摘Classical network reliability problems assume both net- works and components have only binary states, fully working or fully failed states. But many actual networks are multi-state, such as communication networks and transportation networks. The nodes and arcs in the networks may be in intermediate states which are not fully working either fully failed. A simulation ap- proach for computing the two-terminal reliability of a multi-state network is described. Two-terminal reliability is defined as the probability that d units of demand can be supplied from the source to sink nodes under the time threshold T. The capacities of arcs may be in a stochastic state following any discrete or continuous distribution. The transmission time of each arc is also not a fixed number but stochastic according to its current capacity and de- mand. To solve this problem, a capacitated stochastic coloured Petri net is proposed for modelling the system behaviour. Places and transitions respectively stand for the nodes and arcs of a net- work. Capacitated transition and self-modified token colour with route information are defined to describe the multi-state network. By the simulation, the two-terminal reliability and node importance can be estimated and the optimal route whose reliability is highest can also be given. Finally, two examples of different kinds of multi- state networks are given.
基金supported by the National Natural Science Foundation of China(61573129 U1804147)+2 种基金the Innovative Scientists and Technicians Team of Henan Provincial High Education(20IRTSTHN019)the Innovative Scientists and Technicians Team of Henan Polytechnic University(T2019-2 T2017-1)
文摘An event-triggered scheme is proposed to solve the problems of robust guaranteed cost control for a class of two-dimensional(2-D)discrete-time systems.Firstly,an eventtriggered scheme is proposed for 2-D discrete-time systems with parameter uncertainties and sector nonlinearities.Then,according to the Lyapunov functional method,the sufficient conditions for the existence of event-triggered robust guaranteed cost controller for 2-D discrete-time systems with parameter uncertainties and sector nonlinearities are given.Furthermore,based on the sufficient conditions and the linear matrix inequality(LMI)technique,the problem of designing event-triggered robust guaranteed cost controller is transformed into a feasible solution problem of LMI.Finally,a numerical example is given to demonstrate that,under the proposed event-triggered robust guaranteed cost control,the closed-loop system is asymptotically stable and fewer communication resources are occupied.
基金Supported by General Program of the National Natural Science Foundation of China(40774035)
文摘The analytic solution of the magnetotelluric fields for an idealized 2-D model which is composed of two segments with diagonal anisotropy underlain by aperfect insulator basement is considered using aquasi-static analytic approach.The analytic magnetotelluric responses for a particular model are presented.The resulting analytic solution could be used to check the numerical solutions given by numerical algorithms before more complex situations are investigated.
文摘Synthesis of ultra-wideband （UWB） linear frequency modulation radar signals is a very important technology for microwave imaging, target identification and detection of low radar-cross-section （RCS） targets. A new method of UWB radar signals generation with two-channel signal generator is presented. The realization structure is given; the principle and errors of signal synthesis are analyzed. At the same time, an automatic .adjustment measure of signal phase is proposed because of phase discontinuity of waveform in this method. The simulation experiment and analysis results indicate that radar signals with large instantaneous bandwidth can be generated by means of this method on the condition that the high-speed digital devices are limited.
文摘Streamline simulation is developed to simulate waterflooding in fractured reservoirs. Conventional reservoir simulation methods for fluid flow simulation in large and complex reservoirs are very costly and time consuming. In streamline method, transport equations are solved on one-dimensional streamlines to reduce the computation time with less memory for simulation. First, pressure equation is solved on an Eulerian grid and streamlines are traced. Defining the "time of flight", saturation equations are mapped and solved on streamlines. Finally, the results are mapped back on Eulerian grid and the process is repeated until the simulation end time. The waterflooding process is considered in a fractured reservoir using the dual porosity model. Afterwards, a computational code is developed to solve the same problem by the IMPES method and the results of streamline simulation are compared to those of the IMPES and a commercial software. Finally, the accuracy and efficiency of streamline simulator for simulation of two-phase flow in fractured reservoirs has been proved.
基金supported by the National Natural Science Foundation of China(90816027)the Aviation Science Funds(20135853037)+1 种基金the Foundation of China Aerospace Science & Industry Corporation(2013HTXGD2014HTXGD)
文摘A new two-iteration sculling compensation mathematical framework is provided for modern-day strapdown inertial navigation system（SINS） algorithm design that utilizes a new concept in velocity updating. The principal structure of this framework includes twice sculling compensation procedure using incremental outputs from the inertial system sensors during the velocity updating interval. Then, the moderate algorithm is designed to update the velocity parameter. The analysis is conducted in the condition of sculling motion which indicates that the new mathematical framework error which is smaller than the conventional ones by at least two orders is far superior. Therefore, a summary is given for SINS software which can be designed with the new mathematical framework in velocity updating.
基金Sponsored by the National Natural Science Foundation of China (10672080)
文摘The method of two-dimensional viscous space-time conservation element and solution element (CE/SE) can be used to calculate the gas-liquid two-phase interior flow field in pulse detonation engine (PDE). In this paper, the evolution of the detonation wave and the distribution of its physical parameters were analyzed. The numerical results show that the change of axial velocity of gas is the same as that of detonation pressure. The larger the liquid droplet radius is, the longer the time to get stable detonation wave is. The calculated results coincide with the experimented results better.
基金Project(2017YFC0603001)supported by the High-tech Research and Development Program of ChinaProject(51374198)supported by the National Natural Science Foundation of China
文摘Plate shaped sandstones containing two fabricated circular holes that were filled with gypsum and high-strength concrete respectively were prepared for studying the effects of ligament length L ligament incline angle α, as well as filling modes on their strength properties and failure modes. The results show that the initial cracks can be categorized as wing crack, axial tensile crack and curved tensile crack. The failure modes of ligaments can be categorized as mode of single inclined crack, mode of single axial crack and mode of two parallel cracks. The final failure modes of all specimens can be categorized as the tension-shear mixed failure and shear failure. The strength of inclusions shows little influence on the final failure modes of specimens, while the failure modes vary with L and α. When α is a fixed value, the peak strength σc and elastic modulus Ec of tested specimens increase firstly with increasing L and reaches to the maximum value at L of 16 mm, then declines. When L is a fixed value, σc declines firstly and then turns to increase as α increases to 75° from 45°, while Ec increases linearly. The axial stress σp performs the similar variation trends with those of σc versus increasing L and α when ligaments fail.
文摘Traditional monopulse radar cannot resolve two targets present in one range and Doppler cell by means of the monopulse ratio. A novel algorithm is proposed to estimate the directions of two steady targets with two pulses. The algorithm has a closedform expression and its variance is derived at high signal-to-noise ratios（SNRs）. Furthermore, the pulse pair selection criterion and the estimation method with multiple pulses are given. Finally, some numerical results are shown to validate the proposed algorithm and the effect of slight target fluctuations is tested.
基金Supported by Funding (Topic CXZ003) from the New Ideas Team and the Doctoral Research Foundation of Northeast Agricultural University (2008 2010)The Scientific Research Fund of the Heilongjiang Provincial Education Department (11551067)
文摘The overwintering survival ratio of the cultivar Dongnongdongmai 1 with strong cold-resistance in paramos of Heilongjiang Province in China are over 85%. The tillering nodes are the most important organs for overwintering survival of winter wheat, because there are more substances associated with cold resistance in tillering nodes than those in leaves and roots. Proteins in the tillering nodes of the cold-resistant cultivar Dongnongdongmai 1 grown under field conditions with or without any lowtemperature stress were analyzed by 2-dimensional electrophoresis and identified by mass spectrometry. In the range of pH 4-7, the expression of 37 proteins showed obvious difference （±more than two fold） in the proteomic maps of cold-stressed and non-stressed tillering nodes, including a new protein spot. All proteins exhibiting the difference in expression were identified using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry, followed by a database search for protein identification and function prediction. Five groups of proteins were confirmed, namely stress-related proteins （22%）, metabolism-associated proteins （35%）, and signaling molecules （24%）, cell wall-binding proteins （5%）, unclear proteins （14%）. This indicated that tillering node cells supported the energy requirements of plant growth and stress resistance by signal transduction adapting to metabolism and structure.
基金Foundation item： Project（2011BAB09B01） supported by the National Science and Technology Support Program of China Project（cstc2013jcyjA30006） supported by Chongqing Science ＆ Technology Commission, China Project（K J130412） supported by Chongqing Education Commission, China
文摘Previous studies have indicated that piping erosion greatly threatens the safe operation of various hydraulic structures. However, few mathematical models are available to perfectly describe the erosion process due to the complexity of piping. The focus of the present work is to propose a new fluid solid coupling model to eliminate the shortcomings of existing work. A 'pseudo-liquid' assumption is suggested to simulate the particle movement in the erosion process. Then, based on the mass and momentum conservations of the moving particles and flowing water, a new two-flow model is established by using the continuity equations and motion equations. In the model, the erosion rate of soil is determined with a particle erosion law derived from tests results of STERPI. And ERGUN's empirical equation is used to determine the interaction forces between the liquid and the solid. A numerical approach is proposed to solve the model with the finite volume method and SIMPLE algorithm. The new model is validated with the tests results of STERPI. And the soil erosion principles in piping are also explored.
基金supported by the National Natural Science Foundation of China (61250005)Jiangxi Postdoctoral Science Foundation(2013KY07)
文摘A joint power control and relay selection scheme is considered for a cooperative and cognitive radio system where a secondary network shares spectrum with the primary network. In the secondary network, two secondary users （SUs） communicate with each other via an assist relay. The main point is to provide the best system performance to SUs while maintaining the interference power at primary user （PU） under a certain level. Using convex optimization, a closed-form solution is obtained when optimizing the power allocation among the two nodes and relay. Based on this result, a joint power control and relay selection scheme with fewer variable dimensions is proposed to maximize the achievable rate of the secondary system. Simulation results demonstrate that the sum rate of the cognitive two-way relay network increases compared with a random relay selection and fixed power allocation.
