Dyeing of PET materials by traditional methods presents several problems.Plasma technology has received enormous attention as a solution for the environmental problems related with textile surface modifications,and th...Dyeing of PET materials by traditional methods presents several problems.Plasma technology has received enormous attention as a solution for the environmental problems related with textile surface modifications,and there has been a rapid development and commercialization of plasma technology over the past decade.In this work,the synergistic effect of atmospheric pressure plasma on alkaline etching and deep coloring of dyeing properties on polyethylene terephthalate（PET）fabrics and films was investigated.The topographical changes of the PET surface were investigated by atomic force microscopy（AFM）images,which revealed a smooth surface morphology of the untreated sample whereas a high surface roughness for the plasma and/or alkaline treated samples.The effects of atmospheric pressure plasma on alkaline etching of the structure and properties of PET were investigated by means of differential scanning calorimetry（DSC）,the main objective of performing DSC was to investigate the effect of the plasma pre-treatment on the T_g and T_m.Using a tensile strength tester YG065 H and following a standard procedure the maximum force and elongation at maximum force of PET materials was investigated.Oxygen and argon plasma pre-treatment was found to increase the PET fabric weight loss rate.The color strength of PET fabrics was increased by various plasma pre-treatment times.The penetration of plasma and alkaline reactive species deep into the PET structure results in better dyeability and leaves a significant effect on the K/S values of the plasma pre-treated PET.It indicated that plasma pre-treatment has a great synergistic effect with the alkaline treatment of PET.展开更多
A quench-treatment technique is used to prepare a high-quality polycrystalline sample of double perovskite Sr2FeMo06 （SFMO）. X-ray powder diffraction analysis reveals that the sample has a single phase and exhibits ...A quench-treatment technique is used to prepare a high-quality polycrystalline sample of double perovskite Sr2FeMo06 （SFMO）. X-ray powder diffraction analysis reveals that the sample has a single phase and exhibits I4/m symmetry. The cation order η of the sample increases to 98.9（2）% from 94.2（3）%, which is prepared by the traditional sol-gel method. The initial magnetization isotherm of the sample is detected at 300 K. Unit-cell magnetization for the current sample is 1.332 #s at 300 K, and the one for the traditional sol-gel method sample is 0.946#9. Unit-cell magnetization is enhanced to 40.80% by the quench-treatment technique. Quench treatment is an effective method of enhancing the Fe/Mo order and magnetic properties of double perovskite SFMO.展开更多
Catalysis and regeneration efficiency of granular activated carbon （GAC） and activated carbon fiber （ACF） were investigated in a non-equilibrium plasma water treatment reactor with a combination of pulsed streamer...Catalysis and regeneration efficiency of granular activated carbon （GAC） and activated carbon fiber （ACF） were investigated in a non-equilibrium plasma water treatment reactor with a combination of pulsed streamer discharge and GAC or ACF. The experimental results show that the degradation efficiency of methyl orange （MO） by the combined treatment can increase 22% （for GAC） and 24% （for ACF） respectively compared to pulsed discharge treatment alone, indicating that the combined treatment has a synergetic effect. The MO degradation efficiency by the combined treatment with pulsed discharge and saturated GAC or ACF can increase 12% and 17% respectively compared to pulsed discharge treatment alone. Both GAC and ACF show catalysis and the catalysis of ACF is prominent. Meanwhile, the regeneration of GAC and ACF are realized in this process. When H202 is introduced into the system, the utilization efficiency of ozone and ultraviolet light is improved and the regeneration efficiency of GAC and ACF is also increased.展开更多
BACKGROUND:The present study aimed to explore the relationship between surgical methods,hemorrhage position,hemorrhage volume,surgical timing and treatment outcome of hypertensive intracerebral hemorrhage(HICH).METHOD...BACKGROUND:The present study aimed to explore the relationship between surgical methods,hemorrhage position,hemorrhage volume,surgical timing and treatment outcome of hypertensive intracerebral hemorrhage(HICH).METHODS:A total of 1 310 patients,who had been admitted to six hospitals from January 2004 to January 2008,were divided into six groups according to different surgical methods:craniotomy through bone fl ap(group A),craniotomy through a small bone window(group B),stereotactic drilling drainage(group C1 and group C2),neuron-endoscopy operation(group D) and external ventricular drainage(group E) in consideration of hemorrhage position,hemorrhage volume and clinical practice. A retrospective analysis was made of surgical timing and curative effect of the surgical methods.RESULTS:The effectiveness rate of the methods was 74.12% for 1 310 patients after onemonth follow-up. In this series,the disability rate was 44.82% 3–6 months after the operation. Among the 1 310 patients,241(18.40%) patients died after the operation. If hematoma volume was >80 mL and the operation was performed within 3 hours,the mortality rate of group A was signifi cantly lower than that of groups B,C,D,and E(P<0.05). If hematoma volume was 50–80 mL and the operation was performed within 6–12 hours,the mortality rate of groups B and D was lower than that of groups A,C and E(P<0.05). If hematoma volume was 20–50 mL and the operation was performed within 6–24 hours,the mortality rate of group C was lower than that of groups A,B and D(P<0.05).CONCLUSIONS:Craniotomy through a bone f lap is suitable for patients with a large hematoma and hernia of the brain. Stereotactic drilling drainage is suggested for patients with hematoma volume less than 80 mL. The curative effect of HICH individualized treatment would be improved via the suitable selection of operation time and surgical method according to the position and volume of hemorrhage.展开更多
In order to compare with annealed Al-4%Cu alloys, the influence of solute concentration on the serrated flow is investigated by solution treatment. In this paper, some dynamic parameters, such as critical time and the...In order to compare with annealed Al-4%Cu alloys, the influence of solute concentration on the serrated flow is investigated by solution treatment. In this paper, some dynamic parameters, such as critical time and the ultimate tensile strength are obtained. Moreover, the change of the strain rate range for serrated flow in Al-4%Cu alloys prepared by annealing and quenching heat treatments is reported too. The difference between them is attributed to the increasing solute concentration in the bulk of the solution treated materials.展开更多
基金partially supported by the National Natural Science Foundation of China Contract 11375042
文摘Dyeing of PET materials by traditional methods presents several problems.Plasma technology has received enormous attention as a solution for the environmental problems related with textile surface modifications,and there has been a rapid development and commercialization of plasma technology over the past decade.In this work,the synergistic effect of atmospheric pressure plasma on alkaline etching and deep coloring of dyeing properties on polyethylene terephthalate（PET）fabrics and films was investigated.The topographical changes of the PET surface were investigated by atomic force microscopy（AFM）images,which revealed a smooth surface morphology of the untreated sample whereas a high surface roughness for the plasma and/or alkaline treated samples.The effects of atmospheric pressure plasma on alkaline etching of the structure and properties of PET were investigated by means of differential scanning calorimetry（DSC）,the main objective of performing DSC was to investigate the effect of the plasma pre-treatment on the T_g and T_m.Using a tensile strength tester YG065 H and following a standard procedure the maximum force and elongation at maximum force of PET materials was investigated.Oxygen and argon plasma pre-treatment was found to increase the PET fabric weight loss rate.The color strength of PET fabrics was increased by various plasma pre-treatment times.The penetration of plasma and alkaline reactive species deep into the PET structure results in better dyeability and leaves a significant effect on the K/S values of the plasma pre-treated PET.It indicated that plasma pre-treatment has a great synergistic effect with the alkaline treatment of PET.
基金Supported by the National Natural Science Foundation of China under Grant No U1304110the Doctoral Science Foundation of Henan Normal University under Grant No 01026500109
文摘A quench-treatment technique is used to prepare a high-quality polycrystalline sample of double perovskite Sr2FeMo06 （SFMO）. X-ray powder diffraction analysis reveals that the sample has a single phase and exhibits I4/m symmetry. The cation order η of the sample increases to 98.9（2）% from 94.2（3）%, which is prepared by the traditional sol-gel method. The initial magnetization isotherm of the sample is detected at 300 K. Unit-cell magnetization for the current sample is 1.332 #s at 300 K, and the one for the traditional sol-gel method sample is 0.946#9. Unit-cell magnetization is enhanced to 40.80% by the quench-treatment technique. Quench treatment is an effective method of enhancing the Fe/Mo order and magnetic properties of double perovskite SFMO.
基金National Natural Science Foundation of China(Nos.20576079,20776159)
文摘Catalysis and regeneration efficiency of granular activated carbon （GAC） and activated carbon fiber （ACF） were investigated in a non-equilibrium plasma water treatment reactor with a combination of pulsed streamer discharge and GAC or ACF. The experimental results show that the degradation efficiency of methyl orange （MO） by the combined treatment can increase 22% （for GAC） and 24% （for ACF） respectively compared to pulsed discharge treatment alone, indicating that the combined treatment has a synergetic effect. The MO degradation efficiency by the combined treatment with pulsed discharge and saturated GAC or ACF can increase 12% and 17% respectively compared to pulsed discharge treatment alone. Both GAC and ACF show catalysis and the catalysis of ACF is prominent. Meanwhile, the regeneration of GAC and ACF are realized in this process. When H202 is introduced into the system, the utilization efficiency of ozone and ultraviolet light is improved and the regeneration efficiency of GAC and ACF is also increased.
基金supported by a grant from Shanghai Pudong New Area(PWZxkq2011-01)
文摘BACKGROUND:The present study aimed to explore the relationship between surgical methods,hemorrhage position,hemorrhage volume,surgical timing and treatment outcome of hypertensive intracerebral hemorrhage(HICH).METHODS:A total of 1 310 patients,who had been admitted to six hospitals from January 2004 to January 2008,were divided into six groups according to different surgical methods:craniotomy through bone fl ap(group A),craniotomy through a small bone window(group B),stereotactic drilling drainage(group C1 and group C2),neuron-endoscopy operation(group D) and external ventricular drainage(group E) in consideration of hemorrhage position,hemorrhage volume and clinical practice. A retrospective analysis was made of surgical timing and curative effect of the surgical methods.RESULTS:The effectiveness rate of the methods was 74.12% for 1 310 patients after onemonth follow-up. In this series,the disability rate was 44.82% 3–6 months after the operation. Among the 1 310 patients,241(18.40%) patients died after the operation. If hematoma volume was >80 mL and the operation was performed within 3 hours,the mortality rate of group A was signifi cantly lower than that of groups B,C,D,and E(P<0.05). If hematoma volume was 50–80 mL and the operation was performed within 6–12 hours,the mortality rate of groups B and D was lower than that of groups A,C and E(P<0.05). If hematoma volume was 20–50 mL and the operation was performed within 6–24 hours,the mortality rate of group C was lower than that of groups A,B and D(P<0.05).CONCLUSIONS:Craniotomy through a bone f lap is suitable for patients with a large hematoma and hernia of the brain. Stereotactic drilling drainage is suggested for patients with hematoma volume less than 80 mL. The curative effect of HICH individualized treatment would be improved via the suitable selection of operation time and surgical method according to the position and volume of hemorrhage.
基金Project supported by the National Natural Science Foundation of China （Grant Nos 10232030 and 10372098）.
文摘In order to compare with annealed Al-4%Cu alloys, the influence of solute concentration on the serrated flow is investigated by solution treatment. In this paper, some dynamic parameters, such as critical time and the ultimate tensile strength are obtained. Moreover, the change of the strain rate range for serrated flow in Al-4%Cu alloys prepared by annealing and quenching heat treatments is reported too. The difference between them is attributed to the increasing solute concentration in the bulk of the solution treated materials.
