For the simultaneous wireless information and power transfer(SWIPT), the full-duplex MIMO system can achieve simultaneous transmission of information and energy more efficiently than the half-duplex. Based on the mean...For the simultaneous wireless information and power transfer(SWIPT), the full-duplex MIMO system can achieve simultaneous transmission of information and energy more efficiently than the half-duplex. Based on the mean-square-error(MSE) criterion, the optimization problem of joint transceiver design with transmitting power constraint and energy harvesting constraint is formulated. Next, by semidefinite relaxation(SDR) and randomization method, the SDRbased scheme is proposed. In order to reduce the complexity, the closed-form scheme is presented with some simplified measures. Robust beamforming is then studied considering the practical condition. The simulation results such as MSE versus signal-noise-ratio(SNR), MSE versus the iteration number, well prove the performance of the proposed schemes for the system model.展开更多
With more scaling, the speed of than 40 years Moore CMOS transistors is around 100 GHz. Such fact makes it possible to realize mm-wave circuits in CMOS. However, with the target of achieving broadband and power-effici...With more scaling, the speed of than 40 years Moore CMOS transistors is around 100 GHz. Such fact makes it possible to realize mm-wave circuits in CMOS. However, with the target of achieving broadband and power-efficient operation, 60 GHz CMOS RF transceiver faces severe challenges. After reviewing the technology issues, regarding the 60 GHz applications, this paper discusses design challenges both from the system and the building block levels, and also presents some simulated or measured circuits results.展开更多
Human body communication is proposed as a promising body proximal comanunication tech- nology for body sensor networks. To achieve low power and slmll volume ill the sensor nodes, a Ra-dio Frequency （RF） application...Human body communication is proposed as a promising body proximal comanunication tech- nology for body sensor networks. To achieve low power and slmll volume ill the sensor nodes, a Ra-dio Frequency （RF） application-specific integrated circuit transceiver tbr Human Body Commnunication （HBC） is presented and the characteristics of HBC are investigated. A high data rate On-Off Keying （OOK）/Frequency-Shift Keying （FSK） modulation protocol and an OOK/FSK delrodulator circuit are introduced in this paper, with a data-rate-to-carrier-frequency ratio up to 70%. A low noise amplifier is proposed to handle the dynamic range problem and improve the sensitivity of the receiver path. In addi-tion, a low power autonmatic-gain-control system is realized using a novel architecture, thereby render-ing the peak detector circuit and loop filter unneces-sary. Finally, the complete chip is fabricated. Simula-tion results suggest receiver sensitivity to be-75 dBm. The transceiver shows an overall power con-smxption of 32 mW when data rate is 5 Mbps, de-livering a P1dB output power of - 30 dBm.展开更多
It has been shown that the deployment of device-to-device(D2D) communication in cellular systems can provide better support for local services. However, improper design of the hybrid system may cause severe interferen...It has been shown that the deployment of device-to-device(D2D) communication in cellular systems can provide better support for local services. However, improper design of the hybrid system may cause severe interference between cellular and D2D links. In this paper, we consider transceiver design for the system employing multiple antennas to mitigate the interference. The precoder and decoder matrices are optimized in terms of sum mean squared error(MSE) and capacity, respectively. For the MSE minimization problem, we present an alternative transceiver optimization algorithm. While for the non-convex capacity maximization problem, we decompose the primal problem into a sequence of standard convex quadratic programs for efficient optimization. The evaluation of our proposed algorithms for performance enhancement of the entire D2D integrated cellular system is carried out through simulations.展开更多
This paper presents a set of equations describing the terahertz generation and electro-optic detection based on optical rectification in zincblende crystals. The dependence of terahertz emission efficiency on the pola...This paper presents a set of equations describing the terahertz generation and electro-optic detection based on optical rectification in zincblende crystals. The dependence of terahertz emission efficiency on the polarization of incident beam and crystal-orientation is discussed. For the experimental setup with a transceiver which transmits and detects terahertz radiation in the same crystal, we have demonstrated the optimal combination of both parameters above to optimize the working efficiency. Equations supplied in this paper are valid for zincblende crystals with arbitrary crystal- orientation and every possible polarization of an incident beam, which are of great significance for the optimization of a system.展开更多
Ultra-low power transceiver design is proposed for wireless sensor node used in the wireless sensor network（WSN）.Typically,each sensor node contains a transceiver so it is required that both hardware and software de...Ultra-low power transceiver design is proposed for wireless sensor node used in the wireless sensor network（WSN）.Typically,each sensor node contains a transceiver so it is required that both hardware and software designs of WSN node must take care of energy consumption during all modes of operation including active/sleep modes so that the operational life of each node can be increased in order to increase the lifetime of network.The current declared size of the wireless sensor node is of millimeter order,excluding the power source and crystal oscillator.We have proposed a new 2.4 GHz transceiver that has five blocks namely XO,PLL,PA,LNA and IF.The proposed transceiver incorporates less number of low-drop outs（LDOs）regulators.The size of the transceiver is reduced by decreasing the area of beneficiary components up to 0.41 mm;of core area in such a way that some functions are optimally distributed among other components.The proposed design is smaller in size and consumes less power,<1 mW,compared to other transceivers.The operating voltage has also been reduced to 1 V.This transceiver is most efficient and will be fruitful for the wireless networks as it has been designed by considering modern requirements.展开更多
Multi-hop communications are becoming more and more important due to its flexibility and potential to improve communication coverage and quality. In this paper, we discuss the robust transceiver optimization for multi...Multi-hop communications are becoming more and more important due to its flexibility and potential to improve communication coverage and quality. In this paper, we discuss the robust transceiver optimization for multi-hop amplify-and-forward multiple-input multiple-output(MIMO) orthogonal frequency division multiplexing(OFDM) systems. In general, we consider a three-dimensional robust beamforming design, i.e.,frequency, spatial and relay domains. With inevitable channel estimation errors, in our work both weighted mean square error(MSE) minimization and minimizing maximum MSE are adopted as the performance metrics to design robust transceivers. Following the Bayesian robust philosophy, a robust transceiver design is proposed. The design is based on convex optimization, and the involved optimization variables are optimized alternatively. The proposed transceiver optimization algorithms can be applied to the network with arbitrary hops, arbitrary antennas and arbitrary subcarriers. At the end of this paper, the performance advantages of the propose design have been assessed by the numerical results.展开更多
Orthogonal Frequency Division Multiplexing(OFDM) is an effective technique to deal with a frequency selective channel since it can convert the channel into some flat fading subchannels.However,very different output SN...Orthogonal Frequency Division Multiplexing(OFDM) is an effective technique to deal with a frequency selective channel since it can convert the channel into some flat fading subchannels.However,very different output SNR values of the subchannels will lead to poor bit error performance when a linear equalizer and Equal Bit Allocation(EBA) are adopted in OFDM systems.So,we proposed three novel nonlinear Joint Transceiver(JT) schemes based on Zero-Forcing(ZF) criterion and Minimum Mean Square Error(MMSE) criterion respectively,which can transform all subchannels of an OFDM system into subchannels with identical channel gain.Thus,EBA is equivalent to the Optimum Bit Allocation(OBA) for these subchannels.Numerical analysis helps us to obtain the theoretical approximate BER values of the JT scheme.Simulation results verify the numerical analysis and confirm that the performance of our proposed JT scheme greatly outperforms the traditional linear equalizer with EBA at moderate and high SNR values.展开更多
This paper presents a human body communication(HBC)transceiver for wireless body network applications.The transceiver employs on frequency shift keying(FSK)modulation and op-erates in 40 MHz-60 MHz which is the resona...This paper presents a human body communication(HBC)transceiver for wireless body network applications.The transceiver employs on frequency shift keying(FSK)modulation and op-erates in 40 MHz-60 MHz which is the resonant frequency of the human body as an antenna.It achieves high performance and stability through establish passive microstrip line and via models and active device-models.The proposed transceiver is designed and fabricated by FR4 printed cir-cuit board(PCB)process,the transceiver has the ability of configurable data rate up to 2 Mbps and it achieves-86 dBm receiving sensitivity at 2 Mbps data rate.Meanwhile,the transceiver out-put power dynamics range is 34 dB.Furthermore,with a visual interaction interface,the transceiv-er can be agility use in a variety of scenarios.Its measurements are verified on human body.The result shows that the transceiver has ability to send data from person to person by relying on hu-man body antenna radiation.The transceiver shows great prospect in wireless body area networks(WBAN)for telemedicine and emergency communication.展开更多
In this paper,a general scheme in digital self-interference cancellation at baseband for zero-IF full-duplex transceivers is presented. We model the self-interference signals specifically with only the nonlinear disto...In this paper,a general scheme in digital self-interference cancellation at baseband for zero-IF full-duplex transceivers is presented. We model the self-interference signals specifically with only the nonlinear distortion signals falling in receiving band considered. A joint estimation algorithm is proposed for compensating the time delay and frequency offset taking into account the IQ amplitude and phase imbalances from mixers. The memory effect and nonlinear distortion are adaptively estimated by the de-correlated normalized least mean square(DNLMS) algorithm. Numerical simulation results demonstrate that the proposed self-interference cancellation scheme can efficiently compensate the self-interference and outperform the existing traditional solutions.展开更多
现有无源定位闭式算法均考虑视距(Line of Sight,LOS)环境,无法直接应用于存在遮挡的城市环境低空无人机目标定位等场景,同时,非视距(Non-Line of Sight,NLOS)优化定位算法计算效率较低。针对这些问题,本文开展中继辅助下的单站目标定...现有无源定位闭式算法均考虑视距(Line of Sight,LOS)环境,无法直接应用于存在遮挡的城市环境低空无人机目标定位等场景,同时,非视距(Non-Line of Sight,NLOS)优化定位算法计算效率较低。针对这些问题,本文开展中继辅助下的单站目标定位研究,通过引入中继收发器对目标信号进行转发,构造两条路径从而规避遮挡问题,同时考虑中继和观测站位置存在随机误差,提出了一种闭式算法来确定未知目标位置。该算法分为3个步骤:首先利用校准目标-中继收发器-观测站这一路径的额外信息,修正中继和观测站位置;随后基于未知目标-中继收发器-观测站获取的观测信息,通过引入额外变量的方式构建伪线性方程,利用加权最小二乘技术给出目标位置粗略估计;最后进一步挖掘目标位置与额外变量的非线性关系,再次构建矩阵方程并给出目标位置最终估计解。经过理论剖析与仿真验证,所提出的算法在可接受的测量误差和观测站点位置误差范围内,能够逼近克拉美罗下界(Cramer-Rao Lower Bound,CRLB)。展开更多
为提升FPGA(Field Programmable Gate Array)高速Serdes通讯稳定性,实时监控其通讯状态,文中设计了一种基于K码控制字符的通讯协议。创建标志用户数据帧起始的动态SOF(Start of Frame)和标志结束的静态EOF(End of Frame)两种K码控制字符...为提升FPGA(Field Programmable Gate Array)高速Serdes通讯稳定性,实时监控其通讯状态,文中设计了一种基于K码控制字符的通讯协议。创建标志用户数据帧起始的动态SOF(Start of Frame)和标志结束的静态EOF(End of Frame)两种K码控制字符,有利于通讯的连续性检测。创建TLINK(Transmit Link)、BLINK(Back Link)的K码控制字符,其中TLINK控制字符在Serdes的发送端进行定期发送,接收端收到TLINK控制字符后,控制本方的Serdes发送端优先输出BLINK控制字符进行应答,以建立通讯双方之间的握手关系,有利于通讯的超时和状态检测。校验独立于SOF、EOF之间的用户数据,进行CRC32(Cyclic Redundancy Check32)计算,有利于通讯的误码检测。实验结果表明,该协议可实现对Serdes链路的丢帧数量、误码数量、超时数量及通讯断开时长进行准确监控,最小时间精度为10μs。展开更多
The China initiative Accelerator Driven System,CiADS,physics design adopts 162.5 MHz,325 MHz,and 650 MHz cavities,which are driven by the corresponding radio frequency(RF)power system,requiring frequency translation f...The China initiative Accelerator Driven System,CiADS,physics design adopts 162.5 MHz,325 MHz,and 650 MHz cavities,which are driven by the corresponding radio frequency(RF)power system,requiring frequency translation front-end for the RF station.For that application,a general-purpose design front-end prototype has been developed to evaluate the multi-frequency point supported design feasibility.The difficult parts to achieve the requirements of the general-purpose design are reasonable device selection and balanced design.With a carefully selected low-noise wide-band RF mixer and amplifier to balance the performance of multi-frequency supported down-conversion,specially designed LO distribution net to increase isolation between adjacent channels,and external band-pass filter to realize expected up-conversion frequencies,high maintenance and modular front-end generalpurpose design has been implemented.Results of standard parameters show an R2 value of at least 99.991%in the range of-60-10 dBm for linearity,up to 18 dBm for P1dB,and up to 89 dBc for cross talk between adjacent channels.The phase noise spectrum is lower than 80 dBc in the range of 0-1 MHz;cumulative phase noise is 0.006°;and amplitude and phase stability are 0.022%and 0.034°,respectively.展开更多
This paper presents efficient processing engines for software-defined radio （SDR） front-ends. These engines, based on a polyphase channelizer, perform arbitrary sample-rate changes, frequency selection, and bandwidt...This paper presents efficient processing engines for software-defined radio （SDR） front-ends. These engines, based on a polyphase channelizer, perform arbitrary sample-rate changes, frequency selection, and bandwidth control. This paper presents an M-path polyphase filter bank based on a modified N-path polyphase filter. Such a system allows resampling by arbitrary ratios while performing baseband aliasing from center frequencies at Nyquist zones that are not multiples of the output sample rate. This resampling technique is based on sliding cyclic data load interacting with cyclic-shifted coefficients. A non-maximally-decimated polyphase filterbank （where the number of data loads is not equal to the number of M subfilters） processes M subfilters in a time period that is less than or greater than the M data loads. A polyphase filter bank with five different resampling modes is used as a case study for embedded resamp/ing in SDR front-ends. These modes are （i） maximally decimated, （ii） Under-decimated, （iii） over-decimated, and combined up- and down-sampling with （iv） single stride length, and （v） multiple stride lengths. These modes can be used to obtain any required rational sampling rate change in an SDR front-end based on a polyphase channelizer. They can also be used for translation to and from arbitrary center frequencies that are unrelated to the output sample rates.展开更多
A front-end electronics of dose monitor has been developed for measuring irradiation dose to the patient in Shanghai Advanced Proton Therapy Facility.The parallel plate ionization chamber is used for the dose monitori...A front-end electronics of dose monitor has been developed for measuring irradiation dose to the patient in Shanghai Advanced Proton Therapy Facility.The parallel plate ionization chamber is used for the dose monitoring.Unlike the traditional method of recycling capacitor integration and voltage-to-frequency conversion,this dose monitor electronics uses the trans-impedance amplifier and analog-to-digital conversion method.It performs satisfactorily,with the integral nonlinearity of less than ±0.04 nA in the range of-400 to 50 nA and the resolution of about±0.6 nA.展开更多
In,this paper, we propose a new antenna diversity scheme for OFDM-based wireless communication and digital broadcasting applications. Compared with existing schemes, such as post-fast Fourier transform （FFT）, pre-FF...In,this paper, we propose a new antenna diversity scheme for OFDM-based wireless communication and digital broadcasting applications. Compared with existing schemes, such as post-fast Fourier transform （FFT）, pre-FFT, and polyphase-based fitter-bank, the proposed scheme performs optimally and has very low computational complexity. It offers a better compromise between performance, power consumption, and complexity in real-time implementation of the receivers of broadband communication and digital broadcasting systems.展开更多
In the first editorial of this two-part special issue, we pointed out that one of the biggest trends in wireless broadband, radar, sonar, and broadcasting technology is software RF processing and digital front-end [1]...In the first editorial of this two-part special issue, we pointed out that one of the biggest trends in wireless broadband, radar, sonar, and broadcasting technology is software RF processing and digital front-end [1]. Thistrend encompasses signal processing algorithms and integrated circuit design and includes digital pre-distortion （DPD）, conversions between digital and analog signals, digita up-conversion （DUC）, digital down-conversion （DDC）, DC offset,展开更多
基金supported by the National Great Science Specif ic Project (Grants No. 2014ZX03002002-004)National Natural Science Foundation of China (Grants No. NSFC-61471067)
文摘For the simultaneous wireless information and power transfer(SWIPT), the full-duplex MIMO system can achieve simultaneous transmission of information and energy more efficiently than the half-duplex. Based on the mean-square-error(MSE) criterion, the optimization problem of joint transceiver design with transmitting power constraint and energy harvesting constraint is formulated. Next, by semidefinite relaxation(SDR) and randomization method, the SDRbased scheme is proposed. In order to reduce the complexity, the closed-form scheme is presented with some simplified measures. Robust beamforming is then studied considering the practical condition. The simulation results such as MSE versus signal-noise-ratio(SNR), MSE versus the iteration number, well prove the performance of the proposed schemes for the system model.
基金the Project'Design of 60GHz RF CMOS chips and modules'supported by Chinese National High Tech.(863)Plan(2011AA010201 and 2011AA010202)partly supported by National Natural Science Foundation of China(No.61306030)
文摘With more scaling, the speed of than 40 years Moore CMOS transistors is around 100 GHz. Such fact makes it possible to realize mm-wave circuits in CMOS. However, with the target of achieving broadband and power-efficient operation, 60 GHz CMOS RF transceiver faces severe challenges. After reviewing the technology issues, regarding the 60 GHz applications, this paper discusses design challenges both from the system and the building block levels, and also presents some simulated or measured circuits results.
基金This study was supported partially by the Projects of National Natural Science Foundation of China under Crants No. 60932001, No.61072031 the National 863 Program of China un-der Crant No. 2012AA02A604+3 种基金 the National 973 Program of China under Cwant No. 2010CB732606 the Next Generation Communication Technology Major Project of National S＆T un-der Crant No. 2013ZX03005013 the ＂One-hundred Talent＂ and the ＂Low-cost Healthcare＂ Programs of Chinese Academy of Sciences and the Guangdong Innovation Research Team Funds for Low-cost Healthcare and Irrage-Guided Therapy.
文摘Human body communication is proposed as a promising body proximal comanunication tech- nology for body sensor networks. To achieve low power and slmll volume ill the sensor nodes, a Ra-dio Frequency （RF） application-specific integrated circuit transceiver tbr Human Body Commnunication （HBC） is presented and the characteristics of HBC are investigated. A high data rate On-Off Keying （OOK）/Frequency-Shift Keying （FSK） modulation protocol and an OOK/FSK delrodulator circuit are introduced in this paper, with a data-rate-to-carrier-frequency ratio up to 70%. A low noise amplifier is proposed to handle the dynamic range problem and improve the sensitivity of the receiver path. In addi-tion, a low power autonmatic-gain-control system is realized using a novel architecture, thereby render-ing the peak detector circuit and loop filter unneces-sary. Finally, the complete chip is fabricated. Simula-tion results suggest receiver sensitivity to be-75 dBm. The transceiver shows an overall power con-smxption of 32 mW when data rate is 5 Mbps, de-livering a P1dB output power of - 30 dBm.
基金supportedin part by Science and Technology Project of State Grid Corporation of China(SGIT0000KJJS1500008)Science and Technology Project of State Grid Corporation of China:“Research and Application of Distributed Energy Resource Public Information Service Platform based on Multisource Data Fusion and Mobile Internet Technologies”Science and Technology Project of State Grid Corporation of China:“Research on communication access technology for the integration, protection, and acquisition of multiple new energy resources”
文摘It has been shown that the deployment of device-to-device(D2D) communication in cellular systems can provide better support for local services. However, improper design of the hybrid system may cause severe interference between cellular and D2D links. In this paper, we consider transceiver design for the system employing multiple antennas to mitigate the interference. The precoder and decoder matrices are optimized in terms of sum mean squared error(MSE) and capacity, respectively. For the MSE minimization problem, we present an alternative transceiver optimization algorithm. While for the non-convex capacity maximization problem, we decompose the primal problem into a sequence of standard convex quadratic programs for efficient optimization. The evaluation of our proposed algorithms for performance enhancement of the entire D2D integrated cellular system is carried out through simulations.
基金supported by the National Natural Science Foundation of China (Grant No. 10974063)the Natural Science Foundation of Hubei Province of China (Grant No. 2010CDA001)+2 种基金Ph. D. Program Foundation of the Ministry of Education of China (Grant No. 20100142110042)the Fundamental Research Funds for the Central Universities (Grant No. HUST:2010MS041)the National "973" Project (Grant No. 2007CB310403)
文摘This paper presents a set of equations describing the terahertz generation and electro-optic detection based on optical rectification in zincblende crystals. The dependence of terahertz emission efficiency on the polarization of incident beam and crystal-orientation is discussed. For the experimental setup with a transceiver which transmits and detects terahertz radiation in the same crystal, we have demonstrated the optimal combination of both parameters above to optimize the working efficiency. Equations supplied in this paper are valid for zincblende crystals with arbitrary crystal- orientation and every possible polarization of an incident beam, which are of great significance for the optimization of a system.
基金Supported by Young Scientists Fund of the National Natural Science Foundation of China(61201040)
文摘Ultra-low power transceiver design is proposed for wireless sensor node used in the wireless sensor network（WSN）.Typically,each sensor node contains a transceiver so it is required that both hardware and software designs of WSN node must take care of energy consumption during all modes of operation including active/sleep modes so that the operational life of each node can be increased in order to increase the lifetime of network.The current declared size of the wireless sensor node is of millimeter order,excluding the power source and crystal oscillator.We have proposed a new 2.4 GHz transceiver that has five blocks namely XO,PLL,PA,LNA and IF.The proposed transceiver incorporates less number of low-drop outs（LDOs）regulators.The size of the transceiver is reduced by decreasing the area of beneficiary components up to 0.41 mm;of core area in such a way that some functions are optimally distributed among other components.The proposed design is smaller in size and consumes less power,<1 mW,compared to other transceivers.The operating voltage has also been reduced to 1 V.This transceiver is most efficient and will be fruitful for the wireless networks as it has been designed by considering modern requirements.
基金partly supported by the Fundamental Research Funds for the Central Universities(No.2015QNA4046)
文摘Multi-hop communications are becoming more and more important due to its flexibility and potential to improve communication coverage and quality. In this paper, we discuss the robust transceiver optimization for multi-hop amplify-and-forward multiple-input multiple-output(MIMO) orthogonal frequency division multiplexing(OFDM) systems. In general, we consider a three-dimensional robust beamforming design, i.e.,frequency, spatial and relay domains. With inevitable channel estimation errors, in our work both weighted mean square error(MSE) minimization and minimizing maximum MSE are adopted as the performance metrics to design robust transceivers. Following the Bayesian robust philosophy, a robust transceiver design is proposed. The design is based on convex optimization, and the involved optimization variables are optimized alternatively. The proposed transceiver optimization algorithms can be applied to the network with arbitrary hops, arbitrary antennas and arbitrary subcarriers. At the end of this paper, the performance advantages of the propose design have been assessed by the numerical results.
基金the National Natural Science Foundation of China for Distinguished Young Scholars，the National Key Basic Research Program of China (973 program)，the National Natural Science Foundation of China，the National Science and Technology Major Project，the Special Research Fund of State Key Laboratory，the 111 Project
文摘Orthogonal Frequency Division Multiplexing(OFDM) is an effective technique to deal with a frequency selective channel since it can convert the channel into some flat fading subchannels.However,very different output SNR values of the subchannels will lead to poor bit error performance when a linear equalizer and Equal Bit Allocation(EBA) are adopted in OFDM systems.So,we proposed three novel nonlinear Joint Transceiver(JT) schemes based on Zero-Forcing(ZF) criterion and Minimum Mean Square Error(MMSE) criterion respectively,which can transform all subchannels of an OFDM system into subchannels with identical channel gain.Thus,EBA is equivalent to the Optimum Bit Allocation(OBA) for these subchannels.Numerical analysis helps us to obtain the theoretical approximate BER values of the JT scheme.Simulation results verify the numerical analysis and confirm that the performance of our proposed JT scheme greatly outperforms the traditional linear equalizer with EBA at moderate and high SNR values.
基金the National Key R&D Program of China(No.2018YFC2001002)the National Natural Sci-ence Foundation of China(No.62173318)+1 种基金Shenzhen Basic Research Project(No.JCYJ20180507182231907,PIFI 2020 FYB0001)CAS Key Lab of Health Informatics.
文摘This paper presents a human body communication(HBC)transceiver for wireless body network applications.The transceiver employs on frequency shift keying(FSK)modulation and op-erates in 40 MHz-60 MHz which is the resonant frequency of the human body as an antenna.It achieves high performance and stability through establish passive microstrip line and via models and active device-models.The proposed transceiver is designed and fabricated by FR4 printed cir-cuit board(PCB)process,the transceiver has the ability of configurable data rate up to 2 Mbps and it achieves-86 dBm receiving sensitivity at 2 Mbps data rate.Meanwhile,the transceiver out-put power dynamics range is 34 dB.Furthermore,with a visual interaction interface,the transceiv-er can be agility use in a variety of scenarios.Its measurements are verified on human body.The result shows that the transceiver has ability to send data from person to person by relying on hu-man body antenna radiation.The transceiver shows great prospect in wireless body area networks(WBAN)for telemedicine and emergency communication.
基金supported in part by the National Natural Science Foundation of China(No.61601027)
文摘In this paper,a general scheme in digital self-interference cancellation at baseband for zero-IF full-duplex transceivers is presented. We model the self-interference signals specifically with only the nonlinear distortion signals falling in receiving band considered. A joint estimation algorithm is proposed for compensating the time delay and frequency offset taking into account the IQ amplitude and phase imbalances from mixers. The memory effect and nonlinear distortion are adaptively estimated by the de-correlated normalized least mean square(DNLMS) algorithm. Numerical simulation results demonstrate that the proposed self-interference cancellation scheme can efficiently compensate the self-interference and outperform the existing traditional solutions.
文摘现有无源定位闭式算法均考虑视距(Line of Sight,LOS)环境,无法直接应用于存在遮挡的城市环境低空无人机目标定位等场景,同时,非视距(Non-Line of Sight,NLOS)优化定位算法计算效率较低。针对这些问题,本文开展中继辅助下的单站目标定位研究,通过引入中继收发器对目标信号进行转发,构造两条路径从而规避遮挡问题,同时考虑中继和观测站位置存在随机误差,提出了一种闭式算法来确定未知目标位置。该算法分为3个步骤:首先利用校准目标-中继收发器-观测站这一路径的额外信息,修正中继和观测站位置;随后基于未知目标-中继收发器-观测站获取的观测信息,通过引入额外变量的方式构建伪线性方程,利用加权最小二乘技术给出目标位置粗略估计;最后进一步挖掘目标位置与额外变量的非线性关系,再次构建矩阵方程并给出目标位置最终估计解。经过理论剖析与仿真验证,所提出的算法在可接受的测量误差和观测站点位置误差范围内,能够逼近克拉美罗下界(Cramer-Rao Lower Bound,CRLB)。
文摘The China initiative Accelerator Driven System,CiADS,physics design adopts 162.5 MHz,325 MHz,and 650 MHz cavities,which are driven by the corresponding radio frequency(RF)power system,requiring frequency translation front-end for the RF station.For that application,a general-purpose design front-end prototype has been developed to evaluate the multi-frequency point supported design feasibility.The difficult parts to achieve the requirements of the general-purpose design are reasonable device selection and balanced design.With a carefully selected low-noise wide-band RF mixer and amplifier to balance the performance of multi-frequency supported down-conversion,specially designed LO distribution net to increase isolation between adjacent channels,and external band-pass filter to realize expected up-conversion frequencies,high maintenance and modular front-end generalpurpose design has been implemented.Results of standard parameters show an R2 value of at least 99.991%in the range of-60-10 dBm for linearity,up to 18 dBm for P1dB,and up to 89 dBc for cross talk between adjacent channels.The phase noise spectrum is lower than 80 dBc in the range of 0-1 MHz;cumulative phase noise is 0.006°;and amplitude and phase stability are 0.022%and 0.034°,respectively.
文摘This paper presents efficient processing engines for software-defined radio （SDR） front-ends. These engines, based on a polyphase channelizer, perform arbitrary sample-rate changes, frequency selection, and bandwidth control. This paper presents an M-path polyphase filter bank based on a modified N-path polyphase filter. Such a system allows resampling by arbitrary ratios while performing baseband aliasing from center frequencies at Nyquist zones that are not multiples of the output sample rate. This resampling technique is based on sliding cyclic data load interacting with cyclic-shifted coefficients. A non-maximally-decimated polyphase filterbank （where the number of data loads is not equal to the number of M subfilters） processes M subfilters in a time period that is less than or greater than the M data loads. A polyphase filter bank with five different resampling modes is used as a case study for embedded resamp/ing in SDR front-ends. These modes are （i） maximally decimated, （ii） Under-decimated, （iii） over-decimated, and combined up- and down-sampling with （iv） single stride length, and （v） multiple stride lengths. These modes can be used to obtain any required rational sampling rate change in an SDR front-end based on a polyphase channelizer. They can also be used for translation to and from arbitrary center frequencies that are unrelated to the output sample rates.
文摘A front-end electronics of dose monitor has been developed for measuring irradiation dose to the patient in Shanghai Advanced Proton Therapy Facility.The parallel plate ionization chamber is used for the dose monitoring.Unlike the traditional method of recycling capacitor integration and voltage-to-frequency conversion,this dose monitor electronics uses the trans-impedance amplifier and analog-to-digital conversion method.It performs satisfactorily,with the integral nonlinearity of less than ±0.04 nA in the range of-400 to 50 nA and the resolution of about±0.6 nA.
文摘In,this paper, we propose a new antenna diversity scheme for OFDM-based wireless communication and digital broadcasting applications. Compared with existing schemes, such as post-fast Fourier transform （FFT）, pre-FFT, and polyphase-based fitter-bank, the proposed scheme performs optimally and has very low computational complexity. It offers a better compromise between performance, power consumption, and complexity in real-time implementation of the receivers of broadband communication and digital broadcasting systems.
文摘In the first editorial of this two-part special issue, we pointed out that one of the biggest trends in wireless broadband, radar, sonar, and broadcasting technology is software RF processing and digital front-end [1]. Thistrend encompasses signal processing algorithms and integrated circuit design and includes digital pre-distortion （DPD）, conversions between digital and analog signals, digita up-conversion （DUC）, digital down-conversion （DDC）, DC offset,
