Ti-6Al-4V alloy powder was prepared through a two-step reduction of a mixture of TiO_(2),V_(2)O_(5) and Al_(2)O_(3) in this study.The oxide mixture was first reduced by Mg in MgCl_(2) at 750℃ in argon,where oxygen wa...Ti-6Al-4V alloy powder was prepared through a two-step reduction of a mixture of TiO_(2),V_(2)O_(5) and Al_(2)O_(3) in this study.The oxide mixture was first reduced by Mg in MgCl_(2) at 750℃ in argon,where oxygen was reduced to 2.47 wt%from 40.02 wt%.The oxygen content in the final powder was eventually reduced to an extremely low level(0.055 wt%)using calcium at 900℃ in argon,and the final powder had the composition of 90.12 wt%Ti,5.57 wt%Al,and 3.87 wt%V,which meets the standard specification of Ti-6Al-4V(ASTM F1108-09).Between the two reductions,a heat treatment step was designed to help controlling the specific surface area and particle size.The effect of the heat treatment temperature on the morphology,and composition uniformity of the powder was investigated in detail.Heat treatment above 1300℃ attributed to a dense powder with a controlled specific surface area.Thermodynamic modeling and experimental results indicated that onlyα-Ti enriched with Al andβ-Ti enriched with V exist in the final powder,and other possible phases including Al-Mg and Al-V were excluded.This study also offers a triple-step thermochemical process for producing high-purity Ti-based alloy powder.展开更多
In order to investigate the effect of different pillarmaterials on low-temperature de-NO activity of pillaredclay(PILCs),the study is carried out by pillaring clay withtitanium oxides,zirconium oxides,iron oxidesrespe...In order to investigate the effect of different pillarmaterials on low-temperature de-NO activity of pillaredclay(PILCs),the study is carried out by pillaring clay withtitanium oxides,zirconium oxides,iron oxidesrespectively to obtain three different kinds of PILCs,which are then loaded them with the same amount ofmanganese and cerium oxides by the method ofimpregnation.BET,XRD,H2-TPR and NHg-TPD areused to characterize the properties of the catalysts.展开更多
基金Project(52004342) supported by the National Natural Science Foundation of ChinaProject(150240015) supported by the Innovation-Driven Project of Central South University,ChinaProject(2021JJ20065) supported by the Natural Science Fund for Outstanding Young Scholar of Hunan Province,China。
文摘Ti-6Al-4V alloy powder was prepared through a two-step reduction of a mixture of TiO_(2),V_(2)O_(5) and Al_(2)O_(3) in this study.The oxide mixture was first reduced by Mg in MgCl_(2) at 750℃ in argon,where oxygen was reduced to 2.47 wt%from 40.02 wt%.The oxygen content in the final powder was eventually reduced to an extremely low level(0.055 wt%)using calcium at 900℃ in argon,and the final powder had the composition of 90.12 wt%Ti,5.57 wt%Al,and 3.87 wt%V,which meets the standard specification of Ti-6Al-4V(ASTM F1108-09).Between the two reductions,a heat treatment step was designed to help controlling the specific surface area and particle size.The effect of the heat treatment temperature on the morphology,and composition uniformity of the powder was investigated in detail.Heat treatment above 1300℃ attributed to a dense powder with a controlled specific surface area.Thermodynamic modeling and experimental results indicated that onlyα-Ti enriched with Al andβ-Ti enriched with V exist in the final powder,and other possible phases including Al-Mg and Al-V were excluded.This study also offers a triple-step thermochemical process for producing high-purity Ti-based alloy powder.
文摘In order to investigate the effect of different pillarmaterials on low-temperature de-NO activity of pillaredclay(PILCs),the study is carried out by pillaring clay withtitanium oxides,zirconium oxides,iron oxidesrespectively to obtain three different kinds of PILCs,which are then loaded them with the same amount ofmanganese and cerium oxides by the method ofimpregnation.BET,XRD,H2-TPR and NHg-TPD areused to characterize the properties of the catalysts.
