The test process of electric vehicles (EVs) traction battery peak power is analyzed in detail. Aimed at a special “traction” design of versatile battery—HORIZON~ C~2M Battery, the features are introduced. According...The test process of electric vehicles (EVs) traction battery peak power is analyzed in detail. Aimed at a special “traction” design of versatile battery—HORIZON~ C~2M Battery, the features are introduced. According to the peak power test schedule, the test parameters of HORIZON~ C~2M Battery are calculated and the charging and discharging experiments are carried out. The sustained (30 s) discharge power capability of battery at 2/3 of its open circuit voltage at each of various depths of discharge is determined. The dynamic internal resistance under peak power test is established. Considering the temperature impact during discharging, the peak power capability at each of various depths of discharge is corrected. The correctness of peak power test is validated by combining theory analysis with test results.展开更多
"Generalized mobility"is used to realize the unification of tube flow and seepage in form and the unification of commonly used linear and nonlinear flow laws in form,which makes it possible to use the same f..."Generalized mobility"is used to realize the unification of tube flow and seepage in form and the unification of commonly used linear and nonlinear flow laws in form,which makes it possible to use the same form of motion equations to construct unified governing equations for reservoirs of different scales in different regions.Firstly,by defining the generalized mobility under different flow conditions,the basic equation governing fluid flow in reservoir coupling generalized tube flow and seepage is established.Secondly,two typical well test analysis models for coupling tube flow and seepage flow are given,namely,pipe-shaped composite reservoir model and partially open cylindrical reservoir model.The log-log pressure draw-down type-curve of composite pipe-shaped reservoir model can show characteristics of two sets of linear flow.The log-log pressure drawdown plot of partially opened cylindrical reservoir model can show the characteristics of spherical flow and linear flow,as well as spherical flow and radial flow.The pressure build-up derivative curves of the two models basically coincide with their respective pressure drawdown derivative curves in the early stage,pulling down features in the late stage,and the shorter the production time is,the earlier the pulling down feature appears.Finally,the practicability and reliability of the models presented in this paper are verified by three application examples.展开更多
The method,in which a few carats of diamond grits are placed inside a capsule together with a steel ball,shaken for a number of times,and the unbroken ratio of the grits is then used to evaluate the quality of the dia...The method,in which a few carats of diamond grits are placed inside a capsule together with a steel ball,shaken for a number of times,and the unbroken ratio of the grits is then used to evaluate the quality of the diamond,has been well established for many years.However,the unbroken percentage,in an equivalent view,represents the impact toughness of the grits and cannot reflect the value of the crushing energy.Most of the previous empirical formulas obtained from experiments by scholars cannot be applied to practical tests.In this paper,a dimensional analysis was applied to investigate the impact toughness experiment,and the dimensionless relationship has been built among those variables such as the toughness index,the impact time,the impact frequency and the crushing energy per unit area.According to the results of a large number of experiments with synthetic diamond grits of mesh size 45/50,the percentage of the broken grits H is proportional to the impact time T^（1.14） when the impact frequency is 2400 r/min,and the impact frequency f^（2.576） when the number of impacts is 2000.展开更多
Carbonate reservoir patterns play an important role in the production performance of oil and gas wells,and it is usually classified through static data analysis which cannot reflect the actual well performance.This pa...Carbonate reservoir patterns play an important role in the production performance of oil and gas wells,and it is usually classified through static data analysis which cannot reflect the actual well performance.This paper takes the Tazhong No.1 gas field in the Tarim Basin,China as an example to investigate the classification of carbonate reservoirs.The classification method mainly combines well test analysis with production analysis—especially the Blasingame type curve method.Based on the characteristics of type curves for well test analysis and the Blasingame method,the relationship between the type curves and reservoir pattern was established.More than 20 wells were analyzed and the reservoirs were classified into 3 major patterns with 7 sub-classes.Furthermore,the classification results were validated by dynamic performance analysis of wells in the Tazhong No.1 gas field.On the basis of the classification results,well stimulation（i.e.water flooding in a single well） was carried out in three volatile-oil wells,and the oil recovery increased by up to 20%.展开更多
With a transmission system suitable for a medium or large self-propelled cotton picker as the object of the study,the following work focuses on the influence law of an independently designed hydro-mechanical continuou...With a transmission system suitable for a medium or large self-propelled cotton picker as the object of the study,the following work focuses on the influence law of an independently designed hydro-mechanical continuously variable transmission(HMCVT)in the process of changing sections.An HMCVT simulation model was established using the multibody dynamics Simulation X software.The accuracy of the simulation model was verified by comparing the numerical values of the output speed of the HMCVT with model predictions.The HMCVT test bench was built independently using a John Deere 4045HYC11 diesel engine as power input.The engine speed,load torque,oil pressure,and flow of speed regulating valve were considered the influencing factors.The sliding friction power was the response index for the segment change process test.We analysed the reasons for the decrease in output speed during the shifting process,and proposed to effectively reduce the stable speed difference before and after the output shaft shifting by shifting the stage ahead(with displacement ratio of-0.96).This study provides a reference value for the smoothness of the HMCVT of the self-propelled cotton picker,and is relevant in promoting the use of the cotton picker.展开更多
The oil-water two-phase flow pressure-transient analysis model for polymer flooding fractured well is established by considering the comprehensive effects of polymer shear thinning,shear thickening,convection,diffusio...The oil-water two-phase flow pressure-transient analysis model for polymer flooding fractured well is established by considering the comprehensive effects of polymer shear thinning,shear thickening,convection,diffusion,adsorption retention,inaccessible pore volume and effective permeability reduction.The finite volume difference and Newton iteration methods are applied to solve the model,and the effects of fracture conductivity coefficient,injected polymer mass concentration,initial polymer mass concentration and water saturation on the well-test type curves of polymer flooding fractured wells are discussed.The results show that with the increase of fracture conductivity coefficient,the pressure conduction becomes faster and the pressure drop becomes smaller,so the pressure curve of transitional flow goes downward,the duration of bilinear flow becomes shorter,and the linear flow appears earlier and lasts longer.As the injected polymer mass concentration increases,the effective water phase viscosity increases,and the pressure loss increases,so the pressure and pressure derivative curves go upward,and the bilinear flow segment becomes shorter.As the initial polymer mass concentration increases,the effective water phase viscosity increases,so the pressure curve after the wellbore storage segment moves upward as a whole.As the water saturation increases,the relative permeability of water increases,the relative permeability of oil decreases,the total oil-water two-phase mobility becomes larger,and the pressure loss is reduced,so the pressure curve after the wellbore storage segment moves downward as a whole.The reliability and practicability of this new model are verified by the comparison of the results from simplified model and commercial well test software,and the actual well test data.展开更多
The difficulties associated with performing direct compression strength tests on rocks lead to the development of indirect test methods for the rock strength assessment. Indirect test methods are simple, more economic...The difficulties associated with performing direct compression strength tests on rocks lead to the development of indirect test methods for the rock strength assessment. Indirect test methods are simple, more economical, less time-consuming, and easily adaptable to the field. The main aim of this study was to derive correlations between direct and indirect test methods for basalt and rhyolite rock types from Carlin trend deposits in Nevada. In the destructive methods, point load index, block punch index, and splitting tensile strength tests are performed. In the non-destructive methods, Schmidt hammer and ultrasonic pulse velocity tests are performed. Correlations between the direct and indirect compression strength tests are developed using linear and nonlinear regression analysis methods. The results show that the splitting tensile strength has the best correlation with the uniaxial compression strength.Furthermore, the Poisson's ratio has no correlation with any of the direct and indirect test results.展开更多
A differential excitation probe based on eddy current testing technology was designed. Sheet specimens of Q 235 steel with prefabricated micro-cracks of different widths and of aluminum with prefabricated micro-cracks...A differential excitation probe based on eddy current testing technology was designed. Sheet specimens of Q 235 steel with prefabricated micro-cracks of different widths and of aluminum with prefabricated micro-cracks of different depths were detected through the designed detection system. The characteristics of micro-cracks can be clearly showed after signals processing through the short-time Fourier transform（ STFT）. By changing the parameter and its value in detecting process,the factors including the excitation frequency and amplitude,the lift-off effect and the scanning direction were discussed,respectively. The results showed that the differential excitation probe was insensitive to dimension and surface state of the tested specimen,while it had a high degree of recognition for micro-crack detection. Therefore,when the differential excitation detection technology was used for inspecting micro-crack of turbine blade in aero-engine,and smoothed pseudo Wigner-Ville distribution was used for signal processing,micro-cracks of 0. 3 mm depth and 0. 1 mm width could be identified. The experimental results might be useful for further research on engineering test of turbine blades of aero-engine.展开更多
To analyze the existing schemes of high-speed rotorcrafts and some new technologies, a new conceptual sketch of the high-speed rotor/wing transition helicopter RD15 is proposed. The overall layout of the RD15 is given...To analyze the existing schemes of high-speed rotorcrafts and some new technologies, a new conceptual sketch of the high-speed rotor/wing transition helicopter RD15 is proposed. The overall layout of the RD15 is given out and the transition process from the helicopter mode to the airplane mode is designed. The lift system consists of a circular disk-wing with four retractable blades. The technology of individual blade control is adopted for flight control in hover and low speed flight. The tail is a vectored thrust duct propeller. It can provide the anti-torque in hover, and offer the multi-directional controls and propulsion drive for the airplane mode flight. The aerodynamic characteristics and key technologies in the transition process for this layout, including the nose up angle of disk-wing, the length of the blade, rotation speed, pitch angle and other parameters, are theoretically ana lyzed and experimentally tested. Calculation and experiments show that the shift process of the lift, the power and controls are smooth, and the designed scheme is feasible.展开更多
文摘The test process of electric vehicles (EVs) traction battery peak power is analyzed in detail. Aimed at a special “traction” design of versatile battery—HORIZON~ C~2M Battery, the features are introduced. According to the peak power test schedule, the test parameters of HORIZON~ C~2M Battery are calculated and the charging and discharging experiments are carried out. The sustained (30 s) discharge power capability of battery at 2/3 of its open circuit voltage at each of various depths of discharge is determined. The dynamic internal resistance under peak power test is established. Considering the temperature impact during discharging, the peak power capability at each of various depths of discharge is corrected. The correctness of peak power test is validated by combining theory analysis with test results.
基金Supported by the Scientific Research Project of Key Laboratory of Shaanxi Provincial Department of Education(13JS090)。
文摘"Generalized mobility"is used to realize the unification of tube flow and seepage in form and the unification of commonly used linear and nonlinear flow laws in form,which makes it possible to use the same form of motion equations to construct unified governing equations for reservoirs of different scales in different regions.Firstly,by defining the generalized mobility under different flow conditions,the basic equation governing fluid flow in reservoir coupling generalized tube flow and seepage is established.Secondly,two typical well test analysis models for coupling tube flow and seepage flow are given,namely,pipe-shaped composite reservoir model and partially open cylindrical reservoir model.The log-log pressure draw-down type-curve of composite pipe-shaped reservoir model can show characteristics of two sets of linear flow.The log-log pressure drawdown plot of partially opened cylindrical reservoir model can show the characteristics of spherical flow and linear flow,as well as spherical flow and radial flow.The pressure build-up derivative curves of the two models basically coincide with their respective pressure drawdown derivative curves in the early stage,pulling down features in the late stage,and the shorter the production time is,the earlier the pulling down feature appears.Finally,the practicability and reliability of the models presented in this paper are verified by three application examples.
基金Supported by the National Natural Science Foundation of China(11572047)
文摘The method,in which a few carats of diamond grits are placed inside a capsule together with a steel ball,shaken for a number of times,and the unbroken ratio of the grits is then used to evaluate the quality of the diamond,has been well established for many years.However,the unbroken percentage,in an equivalent view,represents the impact toughness of the grits and cannot reflect the value of the crushing energy.Most of the previous empirical formulas obtained from experiments by scholars cannot be applied to practical tests.In this paper,a dimensional analysis was applied to investigate the impact toughness experiment,and the dimensionless relationship has been built among those variables such as the toughness index,the impact time,the impact frequency and the crushing energy per unit area.According to the results of a large number of experiments with synthetic diamond grits of mesh size 45/50,the percentage of the broken grits H is proportional to the impact time T^（1.14） when the impact frequency is 2400 r/min,and the impact frequency f^（2.576） when the number of impacts is 2000.
基金financial support from"Major Projects about Carbonate Reservoirs of Petrochina (2008E-0610-08)""Young Innovation Fund Project of Research Institute of Petroleum Exploration and Development (2009-A-17-13)"
文摘Carbonate reservoir patterns play an important role in the production performance of oil and gas wells,and it is usually classified through static data analysis which cannot reflect the actual well performance.This paper takes the Tazhong No.1 gas field in the Tarim Basin,China as an example to investigate the classification of carbonate reservoirs.The classification method mainly combines well test analysis with production analysis—especially the Blasingame type curve method.Based on the characteristics of type curves for well test analysis and the Blasingame method,the relationship between the type curves and reservoir pattern was established.More than 20 wells were analyzed and the reservoirs were classified into 3 major patterns with 7 sub-classes.Furthermore,the classification results were validated by dynamic performance analysis of wells in the Tazhong No.1 gas field.On the basis of the classification results,well stimulation（i.e.water flooding in a single well） was carried out in three volatile-oil wells,and the oil recovery increased by up to 20%.
基金Supported by the National Natural Science Foundation of China(51665051)the Autonomous Region Graduate Innovation Project of China(XJ2019G112)。
文摘With a transmission system suitable for a medium or large self-propelled cotton picker as the object of the study,the following work focuses on the influence law of an independently designed hydro-mechanical continuously variable transmission(HMCVT)in the process of changing sections.An HMCVT simulation model was established using the multibody dynamics Simulation X software.The accuracy of the simulation model was verified by comparing the numerical values of the output speed of the HMCVT with model predictions.The HMCVT test bench was built independently using a John Deere 4045HYC11 diesel engine as power input.The engine speed,load torque,oil pressure,and flow of speed regulating valve were considered the influencing factors.The sliding friction power was the response index for the segment change process test.We analysed the reasons for the decrease in output speed during the shifting process,and proposed to effectively reduce the stable speed difference before and after the output shaft shifting by shifting the stage ahead(with displacement ratio of-0.96).This study provides a reference value for the smoothness of the HMCVT of the self-propelled cotton picker,and is relevant in promoting the use of the cotton picker.
基金Supported by the National Natural Science Foundation of China(52104049)Science Foundation of China University of Petroleum,Beijing(2462022BJRC004)。
文摘The oil-water two-phase flow pressure-transient analysis model for polymer flooding fractured well is established by considering the comprehensive effects of polymer shear thinning,shear thickening,convection,diffusion,adsorption retention,inaccessible pore volume and effective permeability reduction.The finite volume difference and Newton iteration methods are applied to solve the model,and the effects of fracture conductivity coefficient,injected polymer mass concentration,initial polymer mass concentration and water saturation on the well-test type curves of polymer flooding fractured wells are discussed.The results show that with the increase of fracture conductivity coefficient,the pressure conduction becomes faster and the pressure drop becomes smaller,so the pressure curve of transitional flow goes downward,the duration of bilinear flow becomes shorter,and the linear flow appears earlier and lasts longer.As the injected polymer mass concentration increases,the effective water phase viscosity increases,and the pressure loss increases,so the pressure and pressure derivative curves go upward,and the bilinear flow segment becomes shorter.As the initial polymer mass concentration increases,the effective water phase viscosity increases,so the pressure curve after the wellbore storage segment moves upward as a whole.As the water saturation increases,the relative permeability of water increases,the relative permeability of oil decreases,the total oil-water two-phase mobility becomes larger,and the pressure loss is reduced,so the pressure curve after the wellbore storage segment moves downward as a whole.The reliability and practicability of this new model are verified by the comparison of the results from simplified model and commercial well test software,and the actual well test data.
基金CDC/NIOSH for their partial funding of this work
文摘The difficulties associated with performing direct compression strength tests on rocks lead to the development of indirect test methods for the rock strength assessment. Indirect test methods are simple, more economical, less time-consuming, and easily adaptable to the field. The main aim of this study was to derive correlations between direct and indirect test methods for basalt and rhyolite rock types from Carlin trend deposits in Nevada. In the destructive methods, point load index, block punch index, and splitting tensile strength tests are performed. In the non-destructive methods, Schmidt hammer and ultrasonic pulse velocity tests are performed. Correlations between the direct and indirect compression strength tests are developed using linear and nonlinear regression analysis methods. The results show that the splitting tensile strength has the best correlation with the uniaxial compression strength.Furthermore, the Poisson's ratio has no correlation with any of the direct and indirect test results.
基金Supported by the Ministerial Level Advanced Research Foundation(051317030586)Ph.D.Programs Foundation of the Ministry of Education of China(20121101110018)
文摘A differential excitation probe based on eddy current testing technology was designed. Sheet specimens of Q 235 steel with prefabricated micro-cracks of different widths and of aluminum with prefabricated micro-cracks of different depths were detected through the designed detection system. The characteristics of micro-cracks can be clearly showed after signals processing through the short-time Fourier transform（ STFT）. By changing the parameter and its value in detecting process,the factors including the excitation frequency and amplitude,the lift-off effect and the scanning direction were discussed,respectively. The results showed that the differential excitation probe was insensitive to dimension and surface state of the tested specimen,while it had a high degree of recognition for micro-crack detection. Therefore,when the differential excitation detection technology was used for inspecting micro-crack of turbine blade in aero-engine,and smoothed pseudo Wigner-Ville distribution was used for signal processing,micro-cracks of 0. 3 mm depth and 0. 1 mm width could be identified. The experimental results might be useful for further research on engineering test of turbine blades of aero-engine.
文摘To analyze the existing schemes of high-speed rotorcrafts and some new technologies, a new conceptual sketch of the high-speed rotor/wing transition helicopter RD15 is proposed. The overall layout of the RD15 is given out and the transition process from the helicopter mode to the airplane mode is designed. The lift system consists of a circular disk-wing with four retractable blades. The technology of individual blade control is adopted for flight control in hover and low speed flight. The tail is a vectored thrust duct propeller. It can provide the anti-torque in hover, and offer the multi-directional controls and propulsion drive for the airplane mode flight. The aerodynamic characteristics and key technologies in the transition process for this layout, including the nose up angle of disk-wing, the length of the blade, rotation speed, pitch angle and other parameters, are theoretically ana lyzed and experimentally tested. Calculation and experiments show that the shift process of the lift, the power and controls are smooth, and the designed scheme is feasible.
