This paper describes the evolution of vapour bubbles and its effect on nonlinear ultrasound propagation and temperature rise through tissues for therapeutic ultrasound. An acoustic-thermo coupling algorithm incorporat...This paper describes the evolution of vapour bubbles and its effect on nonlinear ultrasound propagation and temperature rise through tissues for therapeutic ultrasound. An acoustic-thermo coupling algorithm incorporating nonlinearity, diffraction, and temperature-dependent tissue properties, is employed to describe nonlinear ultrasound propagation and thermal effect. Results demonstrate that an obvious migration of peak pressure toward transducer surface is observed while the position of peak temperature changes little in liver tissue before the generation of vapour bubbles, and that the boiling region enlarges towards the surface of transducer in axial direction but increases slowly in radial direction after the generation of vapour bubbles.展开更多
Transcranial focused ultrasound is a booming noninvasive therapy for brain stimuli. The Kelvin–Voigt equations are employed to calculate the sound field created by focusing a 256-element planar phased array through a...Transcranial focused ultrasound is a booming noninvasive therapy for brain stimuli. The Kelvin–Voigt equations are employed to calculate the sound field created by focusing a 256-element planar phased array through a monkey skull with the time-reversal method. Mode conversions between compressional and shear waves exist in the skull. Therefore, the wave field separation method is introduced to calculate the contributions of the two waves to the acoustic intensity and the heat source, respectively. The Pennes equation is used to depict the temperature field induced by ultrasound. Five computational models with the same incident angle of 0？and different distances from the focus for the skull and three computational models at different incident angles and the same distance from the focus for the skull are studied. Numerical results indicate that for all computational models, the acoustic intensity at the focus with mode conversions is 12.05%less than that without mode conversions on average. For the temperature rise, this percentage is 12.02%. Besides, an underestimation of both the acoustic intensity and the temperature rise in the skull tends to occur if mode conversions are ignored. However, if the incident angle exceeds 30？, the rules of the over-and under-estimation may be reversed. Moreover,shear waves contribute 20.54% of the acoustic intensity and 20.74% of the temperature rise in the skull on average for all computational models. The percentage of the temperature rise in the skull from shear waves declines with the increase of the duration of the ultrasound.展开更多
Two methods, rapidly depressurizing to 0.1 MPa at a constant temperature and rising temperature under equilibrium P, T conditions, were used to study the dissociation of pure CH4 hydrate formed below the ice point. At...Two methods, rapidly depressurizing to 0.1 MPa at a constant temperature and rising temperature under equilibrium P, T conditions, were used to study the dissociation of pure CH4 hydrate formed below the ice point. At a constant temperature with rapidly depressurizing to 0.1 MPa, CH4 hydrate dissociated rapidly at initial dissociation and then the dissociation rate gradually decreased. However, the dissociation of CH4 hydrate at temperatures of 261 to 266 K was much faster than that at temperatures of 269 to 272 K, indicating its anomalous preservation. Under an equilibrium P, T conditions, rising temperature had extensively controlling impact on dissociation of CH4 hydrate at equilibrium pressures of 2.31, 2.16 and 1.96 MPa. In this study, we report the effect of pressure on CH4 hydrate dissociation, especially the effect of equilibrium pressure on dissociation at various melting temperatures. And we find that the ice particles size of CH4 hydrate formed may dominant the CH4 hydrate dissociation. Dissociation of CH4 hydrate formed from ice particles of smaller than 250 μm may not have an anomalous preservation below the ice point, while particles larger than 250 μm may have more extensive anomalous preservation.展开更多
A new method to calculate the motor temperature rising in electric vehicle （EV） is proposed based on the stator resistance identification. The measure theory of the motor temperature rising with the stator resistanc...A new method to calculate the motor temperature rising in electric vehicle （EV） is proposed based on the stator resistance identification. The measure theory of the motor temperature rising with the stator resistance is discussed at first. An enhanced magnetism motor dynamic math model is built which is the research object. Then the resistance identification system model is built on the mutual model reference adaptive,system （MRAS） theory. The simulation diagram of the mutual MRAS model is constructed and the resistance identification performance is studied in different motor states. Simulation results indicate that the stator resistance identification model with the mutual MRAS is effective. At the same time, the identification of motor temperature rising is possible with the identification of the stator resistance.展开更多
In recent years,in order to improve the destructive effectiveness of munitions,the use of new types of destructive elements is an important way to improve destructive effectiveness.As a new type of reactive material,r...In recent years,in order to improve the destructive effectiveness of munitions,the use of new types of destructive elements is an important way to improve destructive effectiveness.As a new type of reactive material,reactive alloy contains a large portion of reactive metal elements(Al,Mg,Ti,Zr,etc.),which breaks up under high-velocity impact conditions,generating a large number of high-temperature combustible fragments,which undergo a violent combustion reaction with air.Compared with traditional metal polymers(Al-PTFE)and other reactive composites,it has higher density and strength,excellent mechanical properties and broader application prospects.Currently,researchers have mainly investigated the impact energy release mechanism of reactive alloys through impact tests,and found that there are several important stages in the process of the material from fragmentation to reaction,i.e.,impact fragmentation of the material,rapid heating and combustion reaction.This paper focuses on three problems that need to be solved in the impact-induced energy release process of reactive alloys,namely:the fragmentation mechanism and size distribution law of the fragments produced by the impact of the material on the target,the relationship between the transient temperatures and the size of the fragments,and the reaction temperatures and size thresholds of the fragments to undergo the chemical reaction.The current status of the research of the above problems is reviewed,some potential directions to reveal the impact induced reaction mechanism of reactive alloy is discussed.展开更多
A good contact between the pantograph and catenary is critically important for the working reliability of electric trains, while the basic understanding on the electrical contact evolution during the pantograph--caten...A good contact between the pantograph and catenary is critically important for the working reliability of electric trains, while the basic understanding on the electrical contact evolution during the pantograph--catenary system working is still ambiguous so far. In this paper, the evolution of electric contact was studied in respects of the contact resistance, temperature rise, and microstructure variation, based on a home-made pantograph-catenary simulation system. Pure carbon strips and copper alloy contact wires were used, and the experimental electrical current, sliding speed, and normal force were set as 80 A, 30 km/h, and 80 N, respectively. The contact resistance presented a fluctuation without obvious regularity, concentrating in the region of 25 and 50 mf~. Temperature rise of the contact point experienced a fast increase at the first several minutes and finally reached a steady state. The surface damage of carbon trips in microstructure analysis revealed a complicated interaction of the sliding friction, joule heating, and arc erosion.展开更多
A small amount of Ni was added into the binary Gd50Co50 amorphous alloy to replace Gd in order to obtain ternary Co50Gd50-xNx(x=1,2,and 3)amorphous alloys.Compared to the binary Gd50Co50 amorphous alloy,the Co50Gd50-x...A small amount of Ni was added into the binary Gd50Co50 amorphous alloy to replace Gd in order to obtain ternary Co50Gd50-xNx(x=1,2,and 3)amorphous alloys.Compared to the binary Gd50Co50 amorphous alloy,the Co50Gd50-xNx amorphous alloys show an enhanced Curie temperature(TC)with a weakened formability.The maximum magnetic entropy change(-Δ^Smpeak)of the Co50Gd50-xNx amorphous alloys is found to decrease with the increasing TC.The adiabatic temperature rise(ΔTad)of the Co50Gd47Ni3 amorphous alloy is superior to that of the Fe-based metallic glasses at room temperature.The variation of the TC and-Δ^Smpeak of the Gd50Co50 amorphous alloy with Ni addition,and the mechanism involved,were discussed.展开更多
Combining high-speed schlieren technology and infrared imaging technology,related research has been carried out on the influence of parameters such as actuation voltage,repetition frequency,and electrode size of an ac...Combining high-speed schlieren technology and infrared imaging technology,related research has been carried out on the influence of parameters such as actuation voltage,repetition frequency,and electrode size of an actuator on the discharge characteristics,induced flow field characteristics,and thermal characteristics of nanosecond pulsed dielectric barrier discharge.The results show that increasing the value of the actuation voltage can significantly increase the actuation intensity,and the plasma discharge area is significantly extended.Increasing the repetition frequency can increase the number of discharges per unit time.Both will cause more energy input and induce more changes in the flow field.The effect of temperature rise is more significant.The width of the covered electrode will affect the potential distribution during the discharge process,which in turn will affect the extension process of the plasma discharge filament.Under the same actuation intensity,the wider the covered electrode,the larger range the induced flow field and temperature rise is.Preliminary experimental analyses of high-frequency actuation characteristics,temperature field characteristics,flow field characteristics and actuation parameter settings provide support for the parameter selection and partial mechanism analysis of plasma anti-icing.展开更多
The damage of two typical metal materials, Al alloy 3003 and steel alloy Q235 B, subjected to four representative lightning current components are investigated by laboratory and analytical studies to provide fundament...The damage of two typical metal materials, Al alloy 3003 and steel alloy Q235 B, subjected to four representative lightning current components are investigated by laboratory and analytical studies to provide fundamental data for lightning protection. The four lightning components simulating the natural lightning consist of the first return stroke, the continuing current of interval stroke, the long continuing current, and the subsequent stroke, with amplitudes 200 k A, 8 k A,400 A, and 100 k A, respectively. The damage depth and area suffered from different lightning components are measured by the ultrasonic scanning system. And the temperature rise is measured by the thermal imaging camera. The results show that, for both Al 3003 and steel Q235 B, the first return stroke component results in the largest damage area with damage depth0.02 mm uttermost. The long continuing current component leads to the deepest damage depth of 3.3 mm for Al 3003 and much higher temperature rise than other components. The correlation analysis between damage results and lightning parameters indicates that the damage depth has a positive correlation with charge transfer. The damage area is mainly determined by the current amplitude and the temperature rise increases linearly with the charge transfer larger.展开更多
Conventional multi-stage constant current charging strategies often use higher multiples of current to charge the battery in pursuit of shorter charging times.However,this leads to an increase in battery temperature,w...Conventional multi-stage constant current charging strategies often use higher multiples of current to charge the battery in pursuit of shorter charging times.However,this leads to an increase in battery temperature,while shortening the charging time.This in turn affects the safety of the charging process.Furthermore,the higher charging currents are not ideal for shortening the charging time in the later stages of charging.To solve the aforementioned problems,in this study,a multi-stage constant current charging strategy is presented.This strategy can shorten the battery charging time by using the increase in battery temperature during the charging process as a constraint,using a genetic algorithm to calculate the charging current value,and investigating the phased approach to charging.Finally,the charging strategy is experimentally validated at different ambient temperatures and different initial SOCs.The experimental results show that the charging strategy proposed in this paper not only reduces the amount of calculations,but also reduces the temperature rise by up to 46.4%and charging time by up to 4.2%under different operating conditions.展开更多
A comprehensive model that included mechanical dynamics of the shock absorber coupled with its thermal properties was proposed innovatively.Moreover a thermal-mechanical coupled model which reflected the closed-loop p...A comprehensive model that included mechanical dynamics of the shock absorber coupled with its thermal properties was proposed innovatively.Moreover a thermal-mechanical coupled model which reflected the closed-loop positive feedback system was established by using MATLAB/SIMULINK,and some curves of shock absorber temperature rising characteristic were obtained by simulation ＆computation under several operating modes and different parameters conditions.Research results show that：shock absorber design parameters,external excitations,and thermo-physical properties parameter,such as oil density have effect on the shock absorber temperature rising characteristic.However other thermo-physical properties parameters,such as oil specific heat,cylinder density,cylinder specific heat,and cylinder thermal conductivity,have no effect on it.The results may be used for studying reliability design of the shock absorber.展开更多
基金supported by Program for New Century Excellent Talents in University of China (06-0450)National Natural Science Foundation of China (Grant No 10474044)
文摘This paper describes the evolution of vapour bubbles and its effect on nonlinear ultrasound propagation and temperature rise through tissues for therapeutic ultrasound. An acoustic-thermo coupling algorithm incorporating nonlinearity, diffraction, and temperature-dependent tissue properties, is employed to describe nonlinear ultrasound propagation and thermal effect. Results demonstrate that an obvious migration of peak pressure toward transducer surface is observed while the position of peak temperature changes little in liver tissue before the generation of vapour bubbles, and that the boiling region enlarges towards the surface of transducer in axial direction but increases slowly in radial direction after the generation of vapour bubbles.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.81527901,11604361,and 91630309)
文摘Transcranial focused ultrasound is a booming noninvasive therapy for brain stimuli. The Kelvin–Voigt equations are employed to calculate the sound field created by focusing a 256-element planar phased array through a monkey skull with the time-reversal method. Mode conversions between compressional and shear waves exist in the skull. Therefore, the wave field separation method is introduced to calculate the contributions of the two waves to the acoustic intensity and the heat source, respectively. The Pennes equation is used to depict the temperature field induced by ultrasound. Five computational models with the same incident angle of 0？and different distances from the focus for the skull and three computational models at different incident angles and the same distance from the focus for the skull are studied. Numerical results indicate that for all computational models, the acoustic intensity at the focus with mode conversions is 12.05%less than that without mode conversions on average. For the temperature rise, this percentage is 12.02%. Besides, an underestimation of both the acoustic intensity and the temperature rise in the skull tends to occur if mode conversions are ignored. However, if the incident angle exceeds 30？, the rules of the over-and under-estimation may be reversed. Moreover,shear waves contribute 20.54% of the acoustic intensity and 20.74% of the temperature rise in the skull on average for all computational models. The percentage of the temperature rise in the skull from shear waves declines with the increase of the duration of the ultrasound.
基金supported by the Key Projector of Chinese Academy of Science (No. KZCX-YW-330)the National Science Fund Fostering Talents in Basic Research to Glaciology and Geocryology (Grant No. J0630966)
文摘Two methods, rapidly depressurizing to 0.1 MPa at a constant temperature and rising temperature under equilibrium P, T conditions, were used to study the dissociation of pure CH4 hydrate formed below the ice point. At a constant temperature with rapidly depressurizing to 0.1 MPa, CH4 hydrate dissociated rapidly at initial dissociation and then the dissociation rate gradually decreased. However, the dissociation of CH4 hydrate at temperatures of 261 to 266 K was much faster than that at temperatures of 269 to 272 K, indicating its anomalous preservation. Under an equilibrium P, T conditions, rising temperature had extensively controlling impact on dissociation of CH4 hydrate at equilibrium pressures of 2.31, 2.16 and 1.96 MPa. In this study, we report the effect of pressure on CH4 hydrate dissociation, especially the effect of equilibrium pressure on dissociation at various melting temperatures. And we find that the ice particles size of CH4 hydrate formed may dominant the CH4 hydrate dissociation. Dissociation of CH4 hydrate formed from ice particles of smaller than 250 μm may not have an anomalous preservation below the ice point, while particles larger than 250 μm may have more extensive anomalous preservation.
基金Sponsored by the National"863"Program Project(2005AA501650)
文摘A new method to calculate the motor temperature rising in electric vehicle （EV） is proposed based on the stator resistance identification. The measure theory of the motor temperature rising with the stator resistance is discussed at first. An enhanced magnetism motor dynamic math model is built which is the research object. Then the resistance identification system model is built on the mutual model reference adaptive,system （MRAS） theory. The simulation diagram of the mutual MRAS model is constructed and the resistance identification performance is studied in different motor states. Simulation results indicate that the stator resistance identification model with the mutual MRAS is effective. At the same time, the identification of motor temperature rising is possible with the identification of the stator resistance.
文摘In recent years,in order to improve the destructive effectiveness of munitions,the use of new types of destructive elements is an important way to improve destructive effectiveness.As a new type of reactive material,reactive alloy contains a large portion of reactive metal elements(Al,Mg,Ti,Zr,etc.),which breaks up under high-velocity impact conditions,generating a large number of high-temperature combustible fragments,which undergo a violent combustion reaction with air.Compared with traditional metal polymers(Al-PTFE)and other reactive composites,it has higher density and strength,excellent mechanical properties and broader application prospects.Currently,researchers have mainly investigated the impact energy release mechanism of reactive alloys through impact tests,and found that there are several important stages in the process of the material from fragmentation to reaction,i.e.,impact fragmentation of the material,rapid heating and combustion reaction.This paper focuses on three problems that need to be solved in the impact-induced energy release process of reactive alloys,namely:the fragmentation mechanism and size distribution law of the fragments produced by the impact of the material on the target,the relationship between the transient temperatures and the size of the fragments,and the reaction temperatures and size thresholds of the fragments to undergo the chemical reaction.The current status of the research of the above problems is reviewed,some potential directions to reveal the impact induced reaction mechanism of reactive alloy is discussed.
基金supported by the National Natural Science Foundation of China (Nos. U1234202 and 51577158)the National Science Foundation for Distinguished Young Scholars of China (No. 51325704)the Fundamental Research Funds for the Central Universities (No. A0920502051505-19)
文摘A good contact between the pantograph and catenary is critically important for the working reliability of electric trains, while the basic understanding on the electrical contact evolution during the pantograph--catenary system working is still ambiguous so far. In this paper, the evolution of electric contact was studied in respects of the contact resistance, temperature rise, and microstructure variation, based on a home-made pantograph-catenary simulation system. Pure carbon strips and copper alloy contact wires were used, and the experimental electrical current, sliding speed, and normal force were set as 80 A, 30 km/h, and 80 N, respectively. The contact resistance presented a fluctuation without obvious regularity, concentrating in the region of 25 and 50 mf~. Temperature rise of the contact point experienced a fast increase at the first several minutes and finally reached a steady state. The surface damage of carbon trips in microstructure analysis revealed a complicated interaction of the sliding friction, joule heating, and arc erosion.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.51671119 and 51871139)the Chongqing Research Program of Basic Research and Frontier Technology,China(Grant No.cstc2018jcyjAX0329 and cstc2018jcyjAX0444)the Key Project of Science and Technology Research Program of Chongqing Education Commission of China(Grant No.KJZD-K201900501).
文摘A small amount of Ni was added into the binary Gd50Co50 amorphous alloy to replace Gd in order to obtain ternary Co50Gd50-xNx(x=1,2,and 3)amorphous alloys.Compared to the binary Gd50Co50 amorphous alloy,the Co50Gd50-xNx amorphous alloys show an enhanced Curie temperature(TC)with a weakened formability.The maximum magnetic entropy change(-Δ^Smpeak)of the Co50Gd50-xNx amorphous alloys is found to decrease with the increasing TC.The adiabatic temperature rise(ΔTad)of the Co50Gd47Ni3 amorphous alloy is superior to that of the Fe-based metallic glasses at room temperature.The variation of the TC and-Δ^Smpeak of the Gd50Co50 amorphous alloy with Ni addition,and the mechanism involved,were discussed.
基金supported by the National Key R&D Program of China(No.2019YFA0405300)National Natural Science Foundation of China(Nos.51907205 and 12002363)。
文摘Combining high-speed schlieren technology and infrared imaging technology,related research has been carried out on the influence of parameters such as actuation voltage,repetition frequency,and electrode size of an actuator on the discharge characteristics,induced flow field characteristics,and thermal characteristics of nanosecond pulsed dielectric barrier discharge.The results show that increasing the value of the actuation voltage can significantly increase the actuation intensity,and the plasma discharge area is significantly extended.Increasing the repetition frequency can increase the number of discharges per unit time.Both will cause more energy input and induce more changes in the flow field.The effect of temperature rise is more significant.The width of the covered electrode will affect the potential distribution during the discharge process,which in turn will affect the extension process of the plasma discharge filament.Under the same actuation intensity,the wider the covered electrode,the larger range the induced flow field and temperature rise is.Preliminary experimental analyses of high-frequency actuation characteristics,temperature field characteristics,flow field characteristics and actuation parameter settings provide support for the parameter selection and partial mechanism analysis of plasma anti-icing.
基金supported by a grant from National Natural Science Foundation of China(No.51577117)
文摘The damage of two typical metal materials, Al alloy 3003 and steel alloy Q235 B, subjected to four representative lightning current components are investigated by laboratory and analytical studies to provide fundamental data for lightning protection. The four lightning components simulating the natural lightning consist of the first return stroke, the continuing current of interval stroke, the long continuing current, and the subsequent stroke, with amplitudes 200 k A, 8 k A,400 A, and 100 k A, respectively. The damage depth and area suffered from different lightning components are measured by the ultrasonic scanning system. And the temperature rise is measured by the thermal imaging camera. The results show that, for both Al 3003 and steel Q235 B, the first return stroke component results in the largest damage area with damage depth0.02 mm uttermost. The long continuing current component leads to the deepest damage depth of 3.3 mm for Al 3003 and much higher temperature rise than other components. The correlation analysis between damage results and lightning parameters indicates that the damage depth has a positive correlation with charge transfer. The damage area is mainly determined by the current amplitude and the temperature rise increases linearly with the charge transfer larger.
基金supported by National Natural Science Foundation of China (Grant No. 51677058)
文摘Conventional multi-stage constant current charging strategies often use higher multiples of current to charge the battery in pursuit of shorter charging times.However,this leads to an increase in battery temperature,while shortening the charging time.This in turn affects the safety of the charging process.Furthermore,the higher charging currents are not ideal for shortening the charging time in the later stages of charging.To solve the aforementioned problems,in this study,a multi-stage constant current charging strategy is presented.This strategy can shorten the battery charging time by using the increase in battery temperature during the charging process as a constraint,using a genetic algorithm to calculate the charging current value,and investigating the phased approach to charging.Finally,the charging strategy is experimentally validated at different ambient temperatures and different initial SOCs.The experimental results show that the charging strategy proposed in this paper not only reduces the amount of calculations,but also reduces the temperature rise by up to 46.4%and charging time by up to 4.2%under different operating conditions.
基金Supported by Central Universities Fundamental Research Projects Foundation(11QG22)State Key Laboratory of Automobile Noise Vibration and Safety Projects Foundation(NVHSKL-201105)
文摘A comprehensive model that included mechanical dynamics of the shock absorber coupled with its thermal properties was proposed innovatively.Moreover a thermal-mechanical coupled model which reflected the closed-loop positive feedback system was established by using MATLAB/SIMULINK,and some curves of shock absorber temperature rising characteristic were obtained by simulation ＆computation under several operating modes and different parameters conditions.Research results show that：shock absorber design parameters,external excitations,and thermo-physical properties parameter,such as oil density have effect on the shock absorber temperature rising characteristic.However other thermo-physical properties parameters,such as oil specific heat,cylinder density,cylinder specific heat,and cylinder thermal conductivity,have no effect on it.The results may be used for studying reliability design of the shock absorber.
