Simulating turbulent liquids with breaking waves and splashes is among the most desired features in fluid animation. Lagrangian methods such as Smoothed Particle Hydrodynamics method (SPH) are a promising way to captu...Simulating turbulent liquids with breaking waves and splashes is among the most desired features in fluid animation. Lagrangian methods such as Smoothed Particle Hydrodynamics method (SPH) are a promising way to capture such properties. However, the Particle-based liquid surface simulation has not been applied very well since its consumption is way too large. This paper derives the governing equations in SPH approaches and parallelizes the dynamics-based surface simulation with the MapReduce program models which apply the SPH approach in Cloud Computing. Compared to the serial methods, this approach obtained a 3.11 times speedup on the experimental platform.展开更多
The free surface flow generated by twin-cylinders in forced motion submerged beneath the free surface is studied based on the boundary element method. Two relative locations, namely, horizontal and vertical, are exami...The free surface flow generated by twin-cylinders in forced motion submerged beneath the free surface is studied based on the boundary element method. Two relative locations, namely, horizontal and vertical, are examined for the twin cylinders. In both cases, the twin cylinders are starting from rest and ultimately moving with the same constant speed through an accelerating process. Assuming that the fluid is inviscid and incompressible and the flow to be irrotational, the integral Laplace equation can be discretized based on the boundary element method. Fully-nonlinear boundary conditions are satisfied on the unknown free surface and the moving body surface. The free surface is traced by a Lagrangian technique. Regriding and remeshing are applied, which is crucial to quality of the numerical results. Single circular cylinder and elliptical cylinder are calculated by linear method and fully nonlinear method for accuracy checking and then fully nonlinear method is conducted on the twin cylinder cases, respectively. The generated wave elevation and the resultant force are analysed to discuss the influence of the gap between the two cylinders as well as the water depth. It is found that no matter the kind of distribution, when the moving cylinders are close to each other, they suffer hydrodynamic force with large absolute value in the direction of motion. The trend of force varying with the increase of gap can be clearly seen from numerical analysis. The vertically distributed twin cylinders seem to attract with each other while the horizontally distributed twin cylinders are opposite when they are close to each other.展开更多
The simplified modeling for analysis on MHD stability of free surface jet flow in a gradient magnetic fields is based on the theoretical and experimental results on channel liquid metal MHD flow, especially, the resul...The simplified modeling for analysis on MHD stability of free surface jet flow in a gradient magnetic fields is based on the theoretical and experimental results on channel liquid metal MHD flow, especially, the results of MHD flow velocity distribution in cross-section of channels (rectangular duct and circular pipe), and the expected results from the modeling are well agreed with the recent experimental data obtained. It is the first modeling which can efficiently explain the experimental results of liquid-metal free surface jet flow.展开更多
Multiple steady solutions and hysteresis phenomenon in the square cavity flows driven by the surface with antisymmetric velocity profile are investigated by numerical simulation and bifurcation analysis.A high order s...Multiple steady solutions and hysteresis phenomenon in the square cavity flows driven by the surface with antisymmetric velocity profile are investigated by numerical simulation and bifurcation analysis.A high order spectral element method with the matrix-free pseudo-arclength technique is used for the steady-state solution and numerical continuation.The complex flow patterns beyond the symmetry-breaking at Re≈320 are presented by a bifurcation diagram for Re<2500.The results of stable symmetric and asymmetric solutions are consistent with those reported in literature,and a new unstable asymmetric branch is obtained besides the stable branches.A novel hysteresis phenomenon is observed in the range of 2208<Re<2262,where two pairs of stable and two pairs of unstable asymmetric steady solutions beyond the stable symmetric state coexist.The vortices near the sidewall appear when the Reynolds number increases,which correspond to the bifurcation of topology structure,but not the bifurcation of Navier-Stokes equations.The hysteresis is proposed to be the result of the combined mechanisms of the competition and coalescence of secondary vortices.展开更多
An analytical simulation based on a new model incorporating surface interaction is conducted to study the slip phenomenon in the Couette flow at different scales. The velocity profile is calculated by taking account o...An analytical simulation based on a new model incorporating surface interaction is conducted to study the slip phenomenon in the Couette flow at different scales. The velocity profile is calculated by taking account of the micro-force between molecules and macro-force from the viscous shearing effect, as they contribute to the achieve- ment of the slip length. The calculated results are compared with those obtained from the molecular dynamics simulation, showing an excellent agreement. Further, the effect of the shear rate on the slip is investigated. The results can well predict the fluid flow behaviors on a solid substrate, but has to be proved by experiment.展开更多
The aim of this article is to present the effects of transpiration on the unsteady two-dimensional boundary layer flow of non-Newtonian fluid passing through a stretching sheet in the presence of a first order constru...The aim of this article is to present the effects of transpiration on the unsteady two-dimensional boundary layer flow of non-Newtonian fluid passing through a stretching sheet in the presence of a first order constructive/destructive chemical reaction. The upper-convected Maxwell （UCM） model is used here to characterize the non-Newtonian behavior of the fluid. Using similarity solutions, the governing nonlinear partial differential equations are transformed into ordinary ones and are then solved numerically by the shooting method. The flow fields and mass transfer are significantly influenced by the governing parameters. The fluid velocity initially decreases as the unsteadiness parameter increases and the concentration decreases significantly due to the increase in the unsteadiness. The effect of increasing values of transpiration （suction） and the Maxwell parameter is to suppress the velocity field; however, the concentration is enhanced as transpiration （suction） and the Maxwell parameter increase. Also, it is found that the fluid velocity decreases as the magnetic parameter increases; however, the concentration increases in this case.展开更多
The magnetohydrodynamic（MHD） flow induced by a stretching or shrinking sheet under slip conditions is studied.Analytical solutions based on the boundary layer assumption are obtained in a closed form and can be appl...The magnetohydrodynamic（MHD） flow induced by a stretching or shrinking sheet under slip conditions is studied.Analytical solutions based on the boundary layer assumption are obtained in a closed form and can be applied to a flow configuration with any arbitrary velocity distributions. Seven typical sheet velocity profiles are employed as illustrating examples. The solutions to the slip MHD flow are derived from the general solution and discussed in detail. Different from self-similar boundary layer flows, the flows studied in this work have solutions in explicit analytical forms. However, the current flows require special mass transfer at the wall, which is determined by the moving velocity of the sheet. The effects of the slip parameter, the mass transfer at the wall, and the magnetic field on the flow are also demonstrated.展开更多
Stability of liquid metal film flow under gradient magnetic field is investigated. Three dimensional numerical simulations on magnetohydrodynamics （MHD） effect of free surface film flow were carried out, with emphas...Stability of liquid metal film flow under gradient magnetic field is investigated. Three dimensional numerical simulations on magnetohydrodynamics （MHD） effect of free surface film flow were carried out, with emphasis on the film thickness variation and its surface stability. Three different MHD phenomena of film flow were observed in the experiment, namely, retardant, rivulet and flat film flow. From our experiment and numerical simulation it can be concluded that flat film flow is a good choice for plasma-facing components （PFCs）展开更多
Smoothed particle hydrodynamics (SPH) is a Lagrangian meshless particle method. It is one of the best method for simulating violent free surface flows in fluids and solving large fluid deformations. Dam breaking is a ...Smoothed particle hydrodynamics (SPH) is a Lagrangian meshless particle method. It is one of the best method for simulating violent free surface flows in fluids and solving large fluid deformations. Dam breaking is a typical example of these problems. The basis of SPH was reviewed, including some techniques for governing equation resolution, such as the stepping method and the boundary handling method. Then numerical results of a dam breaking simulation were discussed, and the benefits of concepts like artificial viscosity and position correction were analyzed in detail. When compared with dam breaking simulated by the volume of fluid (VOF) method, the wave profile generated by SPH had good agreement, but the pressure had only reasonable agreement. Improving pressure results is clearly an important next step for research.展开更多
基金supported by National High Technical Research and Development Program of China (863 program) under GrantNo.2009AA062801National Natural Science Foundation of China under Grant No.60973063+2 种基金Beijing Natural Science Foundation of China under Grant No.4092028China Fundamental Research Funds for the Central Universities under Grant No.FRF-TP-09-016BNew Century Personnel Plan for the Ministry of Education of China under Grant No.NCET-10-0221
文摘Simulating turbulent liquids with breaking waves and splashes is among the most desired features in fluid animation. Lagrangian methods such as Smoothed Particle Hydrodynamics method (SPH) are a promising way to capture such properties. However, the Particle-based liquid surface simulation has not been applied very well since its consumption is way too large. This paper derives the governing equations in SPH approaches and parallelizes the dynamics-based surface simulation with the MapReduce program models which apply the SPH approach in Cloud Computing. Compared to the serial methods, this approach obtained a 3.11 times speedup on the experimental platform.
基金Foundation item： Supported by the Lloyd＇s Register Foundation, the Fundamental Research Funds for the Central Universities （Gram No. HEUCF140115）, the National Natural Science Foundation of China （11102048, 11302057）, the Research Funds for State Key Laboratory of Ocean Engineering in Shanghai Jiao Tong University （Grant No. 1310）, and the Specialized Research Fund for the Doctoral Program of Higher Education of China （20132304120028）.
文摘The free surface flow generated by twin-cylinders in forced motion submerged beneath the free surface is studied based on the boundary element method. Two relative locations, namely, horizontal and vertical, are examined for the twin cylinders. In both cases, the twin cylinders are starting from rest and ultimately moving with the same constant speed through an accelerating process. Assuming that the fluid is inviscid and incompressible and the flow to be irrotational, the integral Laplace equation can be discretized based on the boundary element method. Fully-nonlinear boundary conditions are satisfied on the unknown free surface and the moving body surface. The free surface is traced by a Lagrangian technique. Regriding and remeshing are applied, which is crucial to quality of the numerical results. Single circular cylinder and elliptical cylinder are calculated by linear method and fully nonlinear method for accuracy checking and then fully nonlinear method is conducted on the twin cylinder cases, respectively. The generated wave elevation and the resultant force are analysed to discuss the influence of the gap between the two cylinders as well as the water depth. It is found that no matter the kind of distribution, when the moving cylinders are close to each other, they suffer hydrodynamic force with large absolute value in the direction of motion. The trend of force varying with the increase of gap can be clearly seen from numerical analysis. The vertically distributed twin cylinders seem to attract with each other while the horizontally distributed twin cylinders are opposite when they are close to each other.
基金The project partly supported by National Nature Science Foundation of China (No. 10275019)
文摘The simplified modeling for analysis on MHD stability of free surface jet flow in a gradient magnetic fields is based on the theoretical and experimental results on channel liquid metal MHD flow, especially, the results of MHD flow velocity distribution in cross-section of channels (rectangular duct and circular pipe), and the expected results from the modeling are well agreed with the recent experimental data obtained. It is the first modeling which can efficiently explain the experimental results of liquid-metal free surface jet flow.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11902043 and 11772065)the Science Challenge Project(Grant No.TZ2016001).
文摘Multiple steady solutions and hysteresis phenomenon in the square cavity flows driven by the surface with antisymmetric velocity profile are investigated by numerical simulation and bifurcation analysis.A high order spectral element method with the matrix-free pseudo-arclength technique is used for the steady-state solution and numerical continuation.The complex flow patterns beyond the symmetry-breaking at Re≈320 are presented by a bifurcation diagram for Re<2500.The results of stable symmetric and asymmetric solutions are consistent with those reported in literature,and a new unstable asymmetric branch is obtained besides the stable branches.A novel hysteresis phenomenon is observed in the range of 2208<Re<2262,where two pairs of stable and two pairs of unstable asymmetric steady solutions beyond the stable symmetric state coexist.The vortices near the sidewall appear when the Reynolds number increases,which correspond to the bifurcation of topology structure,but not the bifurcation of Navier-Stokes equations.The hysteresis is proposed to be the result of the combined mechanisms of the competition and coalescence of secondary vortices.
基金Supported by the National Natural Science Foundation of China under Grant No 51305033the Ministry of National Defense of China under Grant No 9140C340506
文摘An analytical simulation based on a new model incorporating surface interaction is conducted to study the slip phenomenon in the Couette flow at different scales. The velocity profile is calculated by taking account of the micro-force between molecules and macro-force from the viscous shearing effect, as they contribute to the achieve- ment of the slip length. The calculated results are compared with those obtained from the molecular dynamics simulation, showing an excellent agreement. Further, the effect of the shear rate on the slip is investigated. The results can well predict the fluid flow behaviors on a solid substrate, but has to be proved by experiment.
基金One of the authors(S.M.) was financially supported by UGC New Delhi,India through the Special Assistance Programme DSA Phase-1
文摘The aim of this article is to present the effects of transpiration on the unsteady two-dimensional boundary layer flow of non-Newtonian fluid passing through a stretching sheet in the presence of a first order constructive/destructive chemical reaction. The upper-convected Maxwell （UCM） model is used here to characterize the non-Newtonian behavior of the fluid. Using similarity solutions, the governing nonlinear partial differential equations are transformed into ordinary ones and are then solved numerically by the shooting method. The flow fields and mass transfer are significantly influenced by the governing parameters. The fluid velocity initially decreases as the unsteadiness parameter increases and the concentration decreases significantly due to the increase in the unsteadiness. The effect of increasing values of transpiration （suction） and the Maxwell parameter is to suppress the velocity field; however, the concentration is enhanced as transpiration （suction） and the Maxwell parameter increase. Also, it is found that the fluid velocity decreases as the magnetic parameter increases; however, the concentration increases in this case.
文摘The magnetohydrodynamic（MHD） flow induced by a stretching or shrinking sheet under slip conditions is studied.Analytical solutions based on the boundary layer assumption are obtained in a closed form and can be applied to a flow configuration with any arbitrary velocity distributions. Seven typical sheet velocity profiles are employed as illustrating examples. The solutions to the slip MHD flow are derived from the general solution and discussed in detail. Different from self-similar boundary layer flows, the flows studied in this work have solutions in explicit analytical forms. However, the current flows require special mass transfer at the wall, which is determined by the moving velocity of the sheet. The effects of the slip parameter, the mass transfer at the wall, and the magnetic field on the flow are also demonstrated.
基金National Natural Science Foundation of China(No.B10275019)
文摘Stability of liquid metal film flow under gradient magnetic field is investigated. Three dimensional numerical simulations on magnetohydrodynamics （MHD） effect of free surface film flow were carried out, with emphasis on the film thickness variation and its surface stability. Three different MHD phenomena of film flow were observed in the experiment, namely, retardant, rivulet and flat film flow. From our experiment and numerical simulation it can be concluded that flat film flow is a good choice for plasma-facing components （PFCs）
基金Supported by the National Natural Science Foundation of China under Grant No. 10572041 and 50779008
文摘Smoothed particle hydrodynamics (SPH) is a Lagrangian meshless particle method. It is one of the best method for simulating violent free surface flows in fluids and solving large fluid deformations. Dam breaking is a typical example of these problems. The basis of SPH was reviewed, including some techniques for governing equation resolution, such as the stepping method and the boundary handling method. Then numerical results of a dam breaking simulation were discussed, and the benefits of concepts like artificial viscosity and position correction were analyzed in detail. When compared with dam breaking simulated by the volume of fluid (VOF) method, the wave profile generated by SPH had good agreement, but the pressure had only reasonable agreement. Improving pressure results is clearly an important next step for research.
