The searching method of failure surface which consists of complex geological structures in high and steep rock slopes was studied. Based on computer simulation technology and Monte-Carlo method, three dimensional mult...The searching method of failure surface which consists of complex geological structures in high and steep rock slopes was studied. Based on computer simulation technology and Monte-Carlo method, three dimensional multi-scale geological structures such as engineering scale and statistical scale structures of the slope were simulated. The searching method of failure route which consists of joints and rock bridges was determined via simulation annealing method by considering the shear strength of joints or rock bridges in one supposed route. When shear strengths of all the supposed routes were computed, the least shear strength route was considered failure route. Then, the inclined slice of joint slices and rock bridge slices were separated according to the position of joints and rock bridges. For the rock bridge slices, by distinguishing the failure model, the force direction to the next slice was defined. Finally, the limit equilibrium equations for every slice were established, and the slope stability factor was obtained. One practical example indicates that the discussed method is more closely to the real condition.展开更多
In order to evaluate objectively and accurately the integrity, safety and operating conditions in real time for the Nanjing Yangtze River Bridge, a large structural safety monitoring system was described. The monitori...In order to evaluate objectively and accurately the integrity, safety and operating conditions in real time for the Nanjing Yangtze River Bridge, a large structural safety monitoring system was described. The monitoring system is composed of three parts: sensor system, signal sampling and processing system, and safety monitoring and assessment system. Combining theoretical analysis with measured data analysis, main monitoring contents and layout of measuring points were determined. The vibration response monitoring was significantly investigated. The main contents of safety monitoring on vibration response monitoring are vibration of the main body of the Nanjing Yangtze river bridge, collision avoidance of the bridge piers, vibration of girders on high piers for the bridge approach and earthquake. As a field laboratory, the safety monitorying system also provides information to investigate the unknown and indeterminate problems on bridge structures and specific environment around bridges.展开更多
Based on the physical meaning of sensitivity,a new finite element(FE) model updating method was proposed. In this method,a three-dimensional FE model of the Nanjing Yangtze River Bridge(NYRB) with ANSYS program was es...Based on the physical meaning of sensitivity,a new finite element(FE) model updating method was proposed. In this method,a three-dimensional FE model of the Nanjing Yangtze River Bridge(NYRB) with ANSYS program was established and updated by modifying some design parameters. To further validate the updated FE model,the analytical stress-time histories responses of main members induced by a moving train were compared with the measured ones. The results show that the relative error of maximum stress is 2.49% and the minimum relative coefficient of analytical stress-time histories responses is 0.793. The updated model has a good agreement between the calculated data and the tested data,and provides a current baseline FE model for long-term health monitoring and condition assessment of the NYRB. At the same time,the model is validated by stress-time histories responses to be feasible and practical for railway steel bridge model updating.展开更多
To evaluate the fatigue damage reliability of critical members of the Nanjing Yangtze river bridge, according to the stress-number curve and Miner’s rule, the corresponding expressions for calculating the structural ...To evaluate the fatigue damage reliability of critical members of the Nanjing Yangtze river bridge, according to the stress-number curve and Miner’s rule, the corresponding expressions for calculating the structural fatigue damage reliability were derived. Fatigue damage reliability analysis of some critical members of the Nanjing Yangtze river bridge was carried out by using the strain-time histories measured by the structural health monitoring system of the bridge. The corresponding stress spectra were obtained by the real-time rain-flow counting method. Results of fatigue damage were calculated respectively by the reliability method at different reliability and compared with Miner’s rule. The results show that the fatigue damage of critical members of the Nanjing Yangtze river bridge is very small due to its low live-load stress level.展开更多
The shifting requirements as imposed on operations ma nagement require adjusting and tailoring the organisational structure to meet ma rket demands. However, translating these requirements directly into hierarchical s...The shifting requirements as imposed on operations ma nagement require adjusting and tailoring the organisational structure to meet ma rket demands. However, translating these requirements directly into hierarchical structure will not ensure the integration of processes across organisational un its and guarantee desirable performance. Therefore, management and management li terature wonders: · How should we connect processes to the external environment within a strategi c framework · Which organisational structures do meet performance requirements · Which choices and freedom do we have within organisational structures · How and when do we implement organisational structures That the hierarchical structure does not meet as such the performance requiremen ts nor did it relate to these became already clear during case studies performed in the ’70s. The conclusion was drawn that organisational changes should affect working processes before they proof to be viable. This required the development of new approach through empirical studies and base d on literature. This led to the development of the organelle structure. The org anelle structure should connect to the strategy and the product flow. Thereto, a decision model has been developed for revealing these relations and the practic al implication. During a number of case studies this methodology has been refined and includes t he strategic choice between variants for the organelle structure with their own performance capabilities; we distinguish about 20 variants ranging between the f unctional organisation and the product flow organisation. These ranges of choice s however can be connected to different order entry points, stemming from logist ic concepts. This extends the performance to improved lead-times and improved c ontrol. Strategic choices relate the organelle structure to external performance criteria dictated by product/market-combinations: · lead-time · quality · costs and internal choices for performance criteria: · flexibility · productivity · resource utilisation · innovative performance. Case studies reveal the drastic improvements of the performance of operations an d manufacturing. The paper will discuss a few of these implementations to demons trate the impact. They also show how one derives the hierarchical structure from the choice for the organelle structure. Organelle structures do bridge the link of an industrial company to its environm ent and the internal possibilities, dictated by characteristics of product flow and process execution. The link to the environment results in a strategic framew ork for assessment of alternatives and possibilities. Choices for organelle stru ctures depend strongly on choices on the order entry points of the hardware flow and the specification flow. The evaluation of the characteristics takes place a gainst the strategic framework ensuring competitive advantage as well as a high probability of factual implementation and performance improvement.展开更多
In order to describe an investigation of the flow around high-speed train on a bridge under cross winds using detached-eddy simulation(DES), a 1/8th scale model of a three-car high-speed train and a typical bridge mod...In order to describe an investigation of the flow around high-speed train on a bridge under cross winds using detached-eddy simulation(DES), a 1/8th scale model of a three-car high-speed train and a typical bridge model are employed, Numerical wind tunnel technology based on computational fluid dynamics(CFD) is used, and the CFD models are set as stationary models. The Reynolds number of the flow, based on the inflow velocity and the height of the vehicle, is 1.9×10~6. The computations are conducted under three cases, train on the windward track on the bridge(WWC), train on the leeward track on the bridge(LWC) and train on the flat ground(FGC). Commercial software FLUENT is used and the mesh sensitivity research is carried out by three different grids: coarse, medium and fine. Results show that compared with FGC case, the side force coefficients of the head cars for the WWC and LWC cases increases by 14% and 29%, respectively; the coefficients of middle cars for the WWC and LWC increase by 32% and 10%, respectively; and that of the tail car increases by 45% for the WWC whereas decreases by 2% for the LWC case. The most notable thing is that the side force and the rolling moment of the head car are greater for the LWC, while the side force and the rolling moment of the middle car and the tail car are greater for the WWC. Comparing the velocity profiles at different locations, the flow is significantly influenced by the bridge-train system when the air is close to it. For the three cases(WWC, LWC and FGC), the pressure on the windward side of train is mostly positive while that of the leeward side is negative. The discrepancy of train's aerodynamic force is due to the different surface area of positive pressure and negative pressure zone. Many vortices are born on the leeward edge of the roofs. Theses vortices develop downstream, detach and dissipate into the wake region. The eddies develop irregularly, leading to a noticeably turbulent flow at leeward side of train.展开更多
基金Project(50539100) supported by the National Natural Science Foundation of ChinaProject(BK2006171) supported by the Jiangsu Natural Science Foundation
文摘The searching method of failure surface which consists of complex geological structures in high and steep rock slopes was studied. Based on computer simulation technology and Monte-Carlo method, three dimensional multi-scale geological structures such as engineering scale and statistical scale structures of the slope were simulated. The searching method of failure route which consists of joints and rock bridges was determined via simulation annealing method by considering the shear strength of joints or rock bridges in one supposed route. When shear strengths of all the supposed routes were computed, the least shear strength route was considered failure route. Then, the inclined slice of joint slices and rock bridge slices were separated according to the position of joints and rock bridges. For the rock bridge slices, by distinguishing the failure model, the force direction to the next slice was defined. Finally, the limit equilibrium equations for every slice were established, and the slope stability factor was obtained. One practical example indicates that the discussed method is more closely to the real condition.
文摘In order to evaluate objectively and accurately the integrity, safety and operating conditions in real time for the Nanjing Yangtze River Bridge, a large structural safety monitoring system was described. The monitoring system is composed of three parts: sensor system, signal sampling and processing system, and safety monitoring and assessment system. Combining theoretical analysis with measured data analysis, main monitoring contents and layout of measuring points were determined. The vibration response monitoring was significantly investigated. The main contents of safety monitoring on vibration response monitoring are vibration of the main body of the Nanjing Yangtze river bridge, collision avoidance of the bridge piers, vibration of girders on high piers for the bridge approach and earthquake. As a field laboratory, the safety monitorying system also provides information to investigate the unknown and indeterminate problems on bridge structures and specific environment around bridges.
基金Project(2001G025) supported by the Foundation of the Science and Technology Section of Ministry of Railway of ChinaProject(2006FJ4233) supported by Hunan Postdoctoral Scientific Program of ChinaProject(2006) supported by the Postdoctoral Foundation of Central South University,China
文摘Based on the physical meaning of sensitivity,a new finite element(FE) model updating method was proposed. In this method,a three-dimensional FE model of the Nanjing Yangtze River Bridge(NYRB) with ANSYS program was established and updated by modifying some design parameters. To further validate the updated FE model,the analytical stress-time histories responses of main members induced by a moving train were compared with the measured ones. The results show that the relative error of maximum stress is 2.49% and the minimum relative coefficient of analytical stress-time histories responses is 0.793. The updated model has a good agreement between the calculated data and the tested data,and provides a current baseline FE model for long-term health monitoring and condition assessment of the NYRB. At the same time,the model is validated by stress-time histories responses to be feasible and practical for railway steel bridge model updating.
基金Project(2001G025) supported by the Foundation of the Science and Technology Section of Ministry of Rail way of Chinaproject(2005) supported by the Postdoctoral Foundation of Central South University
文摘To evaluate the fatigue damage reliability of critical members of the Nanjing Yangtze river bridge, according to the stress-number curve and Miner’s rule, the corresponding expressions for calculating the structural fatigue damage reliability were derived. Fatigue damage reliability analysis of some critical members of the Nanjing Yangtze river bridge was carried out by using the strain-time histories measured by the structural health monitoring system of the bridge. The corresponding stress spectra were obtained by the real-time rain-flow counting method. Results of fatigue damage were calculated respectively by the reliability method at different reliability and compared with Miner’s rule. The results show that the fatigue damage of critical members of the Nanjing Yangtze river bridge is very small due to its low live-load stress level.
文摘The shifting requirements as imposed on operations ma nagement require adjusting and tailoring the organisational structure to meet ma rket demands. However, translating these requirements directly into hierarchical structure will not ensure the integration of processes across organisational un its and guarantee desirable performance. Therefore, management and management li terature wonders: · How should we connect processes to the external environment within a strategi c framework · Which organisational structures do meet performance requirements · Which choices and freedom do we have within organisational structures · How and when do we implement organisational structures That the hierarchical structure does not meet as such the performance requiremen ts nor did it relate to these became already clear during case studies performed in the ’70s. The conclusion was drawn that organisational changes should affect working processes before they proof to be viable. This required the development of new approach through empirical studies and base d on literature. This led to the development of the organelle structure. The org anelle structure should connect to the strategy and the product flow. Thereto, a decision model has been developed for revealing these relations and the practic al implication. During a number of case studies this methodology has been refined and includes t he strategic choice between variants for the organelle structure with their own performance capabilities; we distinguish about 20 variants ranging between the f unctional organisation and the product flow organisation. These ranges of choice s however can be connected to different order entry points, stemming from logist ic concepts. This extends the performance to improved lead-times and improved c ontrol. Strategic choices relate the organelle structure to external performance criteria dictated by product/market-combinations: · lead-time · quality · costs and internal choices for performance criteria: · flexibility · productivity · resource utilisation · innovative performance. Case studies reveal the drastic improvements of the performance of operations an d manufacturing. The paper will discuss a few of these implementations to demons trate the impact. They also show how one derives the hierarchical structure from the choice for the organelle structure. Organelle structures do bridge the link of an industrial company to its environm ent and the internal possibilities, dictated by characteristics of product flow and process execution. The link to the environment results in a strategic framew ork for assessment of alternatives and possibilities. Choices for organelle stru ctures depend strongly on choices on the order entry points of the hardware flow and the specification flow. The evaluation of the characteristics takes place a gainst the strategic framework ensuring competitive advantage as well as a high probability of factual implementation and performance improvement.
基金Project(U1534210)supported by the National Natural Science Foundation of ChinaProject(14JJ1003)supported by the Natural Science Foundation of Hunan Province,China+2 种基金Project(2015CX003)supported by the Project of Innovation-driven Plan in Central South University,ChinaProject(14JC1003)supported by the Natural Science Foundation of Hunan Province,ChinaProject(2015T002-A)supported by the Technological Research and Development program of China Railways Cooperation
文摘In order to describe an investigation of the flow around high-speed train on a bridge under cross winds using detached-eddy simulation(DES), a 1/8th scale model of a three-car high-speed train and a typical bridge model are employed, Numerical wind tunnel technology based on computational fluid dynamics(CFD) is used, and the CFD models are set as stationary models. The Reynolds number of the flow, based on the inflow velocity and the height of the vehicle, is 1.9×10~6. The computations are conducted under three cases, train on the windward track on the bridge(WWC), train on the leeward track on the bridge(LWC) and train on the flat ground(FGC). Commercial software FLUENT is used and the mesh sensitivity research is carried out by three different grids: coarse, medium and fine. Results show that compared with FGC case, the side force coefficients of the head cars for the WWC and LWC cases increases by 14% and 29%, respectively; the coefficients of middle cars for the WWC and LWC increase by 32% and 10%, respectively; and that of the tail car increases by 45% for the WWC whereas decreases by 2% for the LWC case. The most notable thing is that the side force and the rolling moment of the head car are greater for the LWC, while the side force and the rolling moment of the middle car and the tail car are greater for the WWC. Comparing the velocity profiles at different locations, the flow is significantly influenced by the bridge-train system when the air is close to it. For the three cases(WWC, LWC and FGC), the pressure on the windward side of train is mostly positive while that of the leeward side is negative. The discrepancy of train's aerodynamic force is due to the different surface area of positive pressure and negative pressure zone. Many vortices are born on the leeward edge of the roofs. Theses vortices develop downstream, detach and dissipate into the wake region. The eddies develop irregularly, leading to a noticeably turbulent flow at leeward side of train.
