As an advanced device for observing atmospheric winds,the spaceborne Doppler Asymmetric Spatial Heterodyne(DASH)interferometer also encounters challenges associated with phase distortion,par-ticularly in limb sounding...As an advanced device for observing atmospheric winds,the spaceborne Doppler Asymmetric Spatial Heterodyne(DASH)interferometer also encounters challenges associated with phase distortion,par-ticularly in limb sounding scenarios.This paper discusses interferogram modeling and phase distortion cor-rection techniques for spaceborne DASH interferometers.The modeling of phase distortion interferograms with and without Doppler shift for limb observation was conducted,and the effectiveness of the analytical expression was verified through numerical simulation.The simulation results indicate that errors propagate layer by layer while using the onion-peeling inversion algorithm to handle phase-distorted interferograms.In contrast,the phase distortion correction algorithm can achieve effective correction.This phase correction method can be successfully applied to correct phase distortions in the interferograms of the spaceborne DASH interferometer,providing a feasible solution to enhance its measurement accuracy.展开更多
This study contests the prevalent perception of graffiti writing,especially tagging and bombing,as meaningless vandalism.It contends that graffiti is a form of expression with intrinsic political implications.Leveragi...This study contests the prevalent perception of graffiti writing,especially tagging and bombing,as meaningless vandalism.It contends that graffiti is a form of expression with intrinsic political implications.Leveraging the notion of spatial justice and Jacques Ranciere's philosophy,I demonstrate how graffiti reclaims urban visibility against the commercial monopoly of visibility in public spaces and challenges the inequitable allocation of opportunities for self-expression in modern cities.Despite writers'common denial of political motives,their actions may be interpreted as manifestations of resistance within wider sociospatial conflicts.This study situates grffti within discussions of political art,spatial commodification,and everyday resistance,proposing a normative framework for viewing the art of the urban signature as an activity that redefines"the community that speaks."展开更多
By introducing noncanonical vortex pairs to partially coherent beams, spatial correlation singularity (SCS) and orbital angular momenta (OAM) of the resulting beams are studied using the Fraunhofer diffraction integra...By introducing noncanonical vortex pairs to partially coherent beams, spatial correlation singularity (SCS) and orbital angular momenta (OAM) of the resulting beams are studied using the Fraunhofer diffraction integral. The effect of noncanonical strength, off-axis distance and vortex sign on spatial correlation singularities in far field is stressed. Furthermore, far-field OAM spectra and densities are also investigated, and the OAM detection and crosstalk probabilities are discussed. The results show that the number of dislocations of SCS always equals the sum of absolute values of topological charges for canonical or noncanonical vortex pairs. Although the sum of the product of each OAM mode and its power weight equals the algebraic sum of topological charges for canonical vortex pairs, the relationship no longer holds in the noncanonical case except for opposite-charge vortex pairs. The changes of off-axis distance, noncanonical strength or coherence length can lead to a more dominant power in adjacent mode than that in center detection mode, which also indicates that crosstalk probabilities of adjacent modes exceed the center detection probability. This work may provide potential applications in OAM-based optical communication, imaging, sensing and computing.展开更多
Femtosecond laser processing is an important machining method for micro-optical components such as Fresnel zone plate(FZP).However,the low processing efficiency of the femtosecond laser restricts its application.Here,...Femtosecond laser processing is an important machining method for micro-optical components such as Fresnel zone plate(FZP).However,the low processing efficiency of the femtosecond laser restricts its application.Here,a femtosecond laser Bessel beam is proposed to process micro-FZP,which is modulated from a Gaussian beam to a Bessel annular beam.The processing time for FZP with an outer diameter of 60μm is reduced from 30 min to 1.5 min on an important semiconductor material gallium arsenide(GaAs),which significantly improves the processing efficiency.In the modulation process,a central ablation hole that has an adverse effect on the diffraction performance is produced,and the adverse effect is eliminated by superimposing the blazed grating hologram.Meanwhile,the FZP machined by spatial light modulator(SLM)has good morphology and higher diffraction efficiency,which provides a strong guarantee for the application of micro-FZP in computed tomography and solar photovoltaic cells.展开更多
Jamming suppression is traditionally achieved through the use of spatial filters based on array signal processing theory.In order to achieve better jamming suppression performance,many studies have applied blind sourc...Jamming suppression is traditionally achieved through the use of spatial filters based on array signal processing theory.In order to achieve better jamming suppression performance,many studies have applied blind source separation(BSS)to jamming suppression.BSS can achieve the separation and extraction of the individual source signals from the mixed signal received by the array.This paper proposes a perspective to recognize BSS as spatial band-pass filters(SBPFs)for jamming suppression applications.The theoretical derivation indicates that the processing of mixed signals by BSS can be perceived as the application of a set of SBPFs that gate the source signals at various angles.Simulations are performed using radar jamming suppression as an example.The simulation results suggest that BSS and SBPFs produce approximately the same effects.Simulation results are consistent with theoretical derivation results.展开更多
Exploring the effective and efficient path of agricultural carbon emission reduction in Henan Province is of great significance to optimizing the strategic layout of China's agricultural emission reduction and car...Exploring the effective and efficient path of agricultural carbon emission reduction in Henan Province is of great significance to optimizing the strategic layout of China's agricultural emission reduction and carbon sequestration.Accordingly,the agricultural carbon emissions of each county were measured scientifically and then the spatial measurement model was utilized to clarify the spatial and temporal evolution trend and spatial effect mechanism of agricultural carbon emissions based on the county data of Henan Province from 2010 to 2020.The results showed that:(1)in 2020,the total agricultural carbon emissions were 134.7274 million tons,with the high distribution in the southeast and low distribution in the northwest;(2)the spatial dependence of agricultural carbon emissions showed a four-stage trend of fluctuating down-continuing up-plummeting-fluctuating up again,and the spatial heterogeneity was dominated by low-low agglomeration,followed by high-low agglomeration;(3)there was an inverted U curve relationship between the level of agricultural economic development and agricultural carbon emissions.The increase in the level of agricultural mechanization and urbanization rate significantly reduced agricultural carbon emissions.The opposite was true for the financial support for agriculture,the income level of rural residents and the structure of the agricultural industry;(4)in terms of spatial spillover effects,the increase in the level of agricultural development in neighbor counties first increased and then decreased agricultural carbon emissions in Henan Province.The mechanization level and urbanization rate of neighbor counties reduced agricultural carbon emissions in Henan Province,and the opposite was true for the income level of rural residents and the scale utilization of agricultural land.展开更多
In order to improve the detection accuracy of Doppler asymmetric spatial heterodyne(DASH)interferometer in harsh temperatures,an opto-mechanical-thermal integration analysis is carried out.Firstly,the correlation betw...In order to improve the detection accuracy of Doppler asymmetric spatial heterodyne(DASH)interferometer in harsh temperatures,an opto-mechanical-thermal integration analysis is carried out.Firstly,the correlation between the interference phase and temperature is established according to the working principle and the phase algorithm of the interferometer.Secondly,the optical mechanical thermal analysis model and thermal deformation data acquisition model are designed.The deformation data of the interference module and the imaging optical system at different temperatures are given by temperature load simulation analysis,and the phase error caused by thermal deformation is obtained by fitting.Finally,based on the wind speed error caused by thermal deformation of each component,a reasonable temperature control scheme is proposed.The results show that the interference module occupies the main cause,the temperature must be controlled within(20±0.05)℃,and the temperature control should be carried out for the temperature sensitive parts,and the wind speed error caused by the part is 3.8 m/s.The thermal drift between the magnification of the imaging optical system and the thermal drift of the relative position between the imaging optical system and the detector should occupy the secondary cause,which should be controlled within(20±2)℃,and the wind speed error caused by the part is 3.05 m/s.In summary,the wind measurement error caused by interference module,imaging optical system,and the relative position between the imaging optical system and the detector can be controlled within 6.85 m/s.The analysis and temperature control schemes presented in this paper can provide theoretical basis for DASH interferometer engineering applications.展开更多
The laser-guided bomb(LGB)is an air-to-ground pre-cision-guided weapon that offers high hit rates,great power,and ease of use.LGBs are guided by semi-active laser ground-seek-ing technology,which means that atmospheri...The laser-guided bomb(LGB)is an air-to-ground pre-cision-guided weapon that offers high hit rates,great power,and ease of use.LGBs are guided by semi-active laser ground-seek-ing technology,which means that atmospheric conditions can affect their accuracy.The spatial release region(SRR)of LGBs is difficult to calculate precisely,especially when there is a poor field of view.This can result in a lower real hit probability.To increase the hit probability of LGBs in tough atmospheric situa-tions,a novel method for calculating the SRR has been pro-posed.This method is based on the transmittance model of the 1.06μm laser in atmospheric species and the laser diffuse reflection model of the target surface to determine the capture target time of the laser seeker.Then,it calculates the boundary ballistic space starting position by ballistic model and gets the spatial scope of the spatial release region.This method can determine the release region of LGBs based on flight test data such as instantaneous velocity,altitude,off-axis angle,and atmospheric visibility.By more effectively employing aircraft release conditions,atmospheric visibility and other factors,the SRR calculation method can improve LGB hit probabi-lity by 9.2%.展开更多
土壤是具有高度异质性的复合体。早期的数字土壤制图研究主要关注水平方向的土壤空间变异和制图,对垂直方向空间变异和土壤三维制图考虑较少。近年来,三维地理信息技术和对地观测与探测技术的快速发展,极大地促进了土壤三维空间数据获...土壤是具有高度异质性的复合体。早期的数字土壤制图研究主要关注水平方向的土壤空间变异和制图,对垂直方向空间变异和土壤三维制图考虑较少。近年来,三维地理信息技术和对地观测与探测技术的快速发展,极大地促进了土壤三维空间数据获取、三维空间推测、三维数据模型、三维模型构建和可视化方法等方面的研究。本文对三维空间土壤推测与土壤模型构建的已有方法进行梳理和评述,以期为三维数字土壤制图的应用和发展提供建议。以三维土壤制图、三维GIS、三维数据模型、三维地质建模、三维可视化、土壤空间变异、空间推测、克里格插值、土壤-景观分析、深度函数、机器学习、地统计学、随机模拟等为关键词检索Web of Science数据库,基于相关度、引用率和文献来源等因素进一步筛选出重点文献进行分析。归纳整理了土壤空间变异性、三维空间土壤推测、三维空间数据模型和三维模型构建等关键技术的现有研究体系,对各种三维推测和建模方法的优缺点和适用场景作出评价。针对目前研究中存在的垂直方向土壤数据稀少、土壤三维推测精度低、三维模型质量待提高等问题,提出一些可行的研究思路。展开更多
文摘As an advanced device for observing atmospheric winds,the spaceborne Doppler Asymmetric Spatial Heterodyne(DASH)interferometer also encounters challenges associated with phase distortion,par-ticularly in limb sounding scenarios.This paper discusses interferogram modeling and phase distortion cor-rection techniques for spaceborne DASH interferometers.The modeling of phase distortion interferograms with and without Doppler shift for limb observation was conducted,and the effectiveness of the analytical expression was verified through numerical simulation.The simulation results indicate that errors propagate layer by layer while using the onion-peeling inversion algorithm to handle phase-distorted interferograms.In contrast,the phase distortion correction algorithm can achieve effective correction.This phase correction method can be successfully applied to correct phase distortions in the interferograms of the spaceborne DASH interferometer,providing a feasible solution to enhance its measurement accuracy.
文摘This study contests the prevalent perception of graffiti writing,especially tagging and bombing,as meaningless vandalism.It contends that graffiti is a form of expression with intrinsic political implications.Leveraging the notion of spatial justice and Jacques Ranciere's philosophy,I demonstrate how graffiti reclaims urban visibility against the commercial monopoly of visibility in public spaces and challenges the inequitable allocation of opportunities for self-expression in modern cities.Despite writers'common denial of political motives,their actions may be interpreted as manifestations of resistance within wider sociospatial conflicts.This study situates grffti within discussions of political art,spatial commodification,and everyday resistance,proposing a normative framework for viewing the art of the urban signature as an activity that redefines"the community that speaks."
文摘By introducing noncanonical vortex pairs to partially coherent beams, spatial correlation singularity (SCS) and orbital angular momenta (OAM) of the resulting beams are studied using the Fraunhofer diffraction integral. The effect of noncanonical strength, off-axis distance and vortex sign on spatial correlation singularities in far field is stressed. Furthermore, far-field OAM spectra and densities are also investigated, and the OAM detection and crosstalk probabilities are discussed. The results show that the number of dislocations of SCS always equals the sum of absolute values of topological charges for canonical or noncanonical vortex pairs. Although the sum of the product of each OAM mode and its power weight equals the algebraic sum of topological charges for canonical vortex pairs, the relationship no longer holds in the noncanonical case except for opposite-charge vortex pairs. The changes of off-axis distance, noncanonical strength or coherence length can lead to a more dominant power in adjacent mode than that in center detection mode, which also indicates that crosstalk probabilities of adjacent modes exceed the center detection probability. This work may provide potential applications in OAM-based optical communication, imaging, sensing and computing.
基金Projects(51875584,51875585,51975590)supported by the National Natural Science Foundation of China。
文摘Femtosecond laser processing is an important machining method for micro-optical components such as Fresnel zone plate(FZP).However,the low processing efficiency of the femtosecond laser restricts its application.Here,a femtosecond laser Bessel beam is proposed to process micro-FZP,which is modulated from a Gaussian beam to a Bessel annular beam.The processing time for FZP with an outer diameter of 60μm is reduced from 30 min to 1.5 min on an important semiconductor material gallium arsenide(GaAs),which significantly improves the processing efficiency.In the modulation process,a central ablation hole that has an adverse effect on the diffraction performance is produced,and the adverse effect is eliminated by superimposing the blazed grating hologram.Meanwhile,the FZP machined by spatial light modulator(SLM)has good morphology and higher diffraction efficiency,which provides a strong guarantee for the application of micro-FZP in computed tomography and solar photovoltaic cells.
基金supported by the National Natural Science Foundation of China(6237104662201048)the Natural Science Foundation of Chongqing,China(cstc2020jcyj-msxmX0260).
文摘Jamming suppression is traditionally achieved through the use of spatial filters based on array signal processing theory.In order to achieve better jamming suppression performance,many studies have applied blind source separation(BSS)to jamming suppression.BSS can achieve the separation and extraction of the individual source signals from the mixed signal received by the array.This paper proposes a perspective to recognize BSS as spatial band-pass filters(SBPFs)for jamming suppression applications.The theoretical derivation indicates that the processing of mixed signals by BSS can be perceived as the application of a set of SBPFs that gate the source signals at various angles.Simulations are performed using radar jamming suppression as an example.The simulation results suggest that BSS and SBPFs produce approximately the same effects.Simulation results are consistent with theoretical derivation results.
基金Supported by the Humanities and Social Sciences Planning Program of the Ministry of Education(23YJA790027)。
文摘Exploring the effective and efficient path of agricultural carbon emission reduction in Henan Province is of great significance to optimizing the strategic layout of China's agricultural emission reduction and carbon sequestration.Accordingly,the agricultural carbon emissions of each county were measured scientifically and then the spatial measurement model was utilized to clarify the spatial and temporal evolution trend and spatial effect mechanism of agricultural carbon emissions based on the county data of Henan Province from 2010 to 2020.The results showed that:(1)in 2020,the total agricultural carbon emissions were 134.7274 million tons,with the high distribution in the southeast and low distribution in the northwest;(2)the spatial dependence of agricultural carbon emissions showed a four-stage trend of fluctuating down-continuing up-plummeting-fluctuating up again,and the spatial heterogeneity was dominated by low-low agglomeration,followed by high-low agglomeration;(3)there was an inverted U curve relationship between the level of agricultural economic development and agricultural carbon emissions.The increase in the level of agricultural mechanization and urbanization rate significantly reduced agricultural carbon emissions.The opposite was true for the financial support for agriculture,the income level of rural residents and the structure of the agricultural industry;(4)in terms of spatial spillover effects,the increase in the level of agricultural development in neighbor counties first increased and then decreased agricultural carbon emissions in Henan Province.The mechanization level and urbanization rate of neighbor counties reduced agricultural carbon emissions in Henan Province,and the opposite was true for the income level of rural residents and the scale utilization of agricultural land.
文摘In order to improve the detection accuracy of Doppler asymmetric spatial heterodyne(DASH)interferometer in harsh temperatures,an opto-mechanical-thermal integration analysis is carried out.Firstly,the correlation between the interference phase and temperature is established according to the working principle and the phase algorithm of the interferometer.Secondly,the optical mechanical thermal analysis model and thermal deformation data acquisition model are designed.The deformation data of the interference module and the imaging optical system at different temperatures are given by temperature load simulation analysis,and the phase error caused by thermal deformation is obtained by fitting.Finally,based on the wind speed error caused by thermal deformation of each component,a reasonable temperature control scheme is proposed.The results show that the interference module occupies the main cause,the temperature must be controlled within(20±0.05)℃,and the temperature control should be carried out for the temperature sensitive parts,and the wind speed error caused by the part is 3.8 m/s.The thermal drift between the magnification of the imaging optical system and the thermal drift of the relative position between the imaging optical system and the detector should occupy the secondary cause,which should be controlled within(20±2)℃,and the wind speed error caused by the part is 3.05 m/s.In summary,the wind measurement error caused by interference module,imaging optical system,and the relative position between the imaging optical system and the detector can be controlled within 6.85 m/s.The analysis and temperature control schemes presented in this paper can provide theoretical basis for DASH interferometer engineering applications.
基金This work was supported by the major research projects within the military-international class(JY2021B077).
文摘The laser-guided bomb(LGB)is an air-to-ground pre-cision-guided weapon that offers high hit rates,great power,and ease of use.LGBs are guided by semi-active laser ground-seek-ing technology,which means that atmospheric conditions can affect their accuracy.The spatial release region(SRR)of LGBs is difficult to calculate precisely,especially when there is a poor field of view.This can result in a lower real hit probability.To increase the hit probability of LGBs in tough atmospheric situa-tions,a novel method for calculating the SRR has been pro-posed.This method is based on the transmittance model of the 1.06μm laser in atmospheric species and the laser diffuse reflection model of the target surface to determine the capture target time of the laser seeker.Then,it calculates the boundary ballistic space starting position by ballistic model and gets the spatial scope of the spatial release region.This method can determine the release region of LGBs based on flight test data such as instantaneous velocity,altitude,off-axis angle,and atmospheric visibility.By more effectively employing aircraft release conditions,atmospheric visibility and other factors,the SRR calculation method can improve LGB hit probabi-lity by 9.2%.
文摘土壤是具有高度异质性的复合体。早期的数字土壤制图研究主要关注水平方向的土壤空间变异和制图,对垂直方向空间变异和土壤三维制图考虑较少。近年来,三维地理信息技术和对地观测与探测技术的快速发展,极大地促进了土壤三维空间数据获取、三维空间推测、三维数据模型、三维模型构建和可视化方法等方面的研究。本文对三维空间土壤推测与土壤模型构建的已有方法进行梳理和评述,以期为三维数字土壤制图的应用和发展提供建议。以三维土壤制图、三维GIS、三维数据模型、三维地质建模、三维可视化、土壤空间变异、空间推测、克里格插值、土壤-景观分析、深度函数、机器学习、地统计学、随机模拟等为关键词检索Web of Science数据库,基于相关度、引用率和文献来源等因素进一步筛选出重点文献进行分析。归纳整理了土壤空间变异性、三维空间土壤推测、三维空间数据模型和三维模型构建等关键技术的现有研究体系,对各种三维推测和建模方法的优缺点和适用场景作出评价。针对目前研究中存在的垂直方向土壤数据稀少、土壤三维推测精度低、三维模型质量待提高等问题,提出一些可行的研究思路。
