An efficient analyzing approach is presented for large slotted-waveguide antenna arrays by using hybrid finite element-boundary integral-multilevel fast multipole algorithm（FE-BI-MLFMA）in this paper.A simple computa...An efficient analyzing approach is presented for large slotted-waveguide antenna arrays by using hybrid finite element-boundary integral-multilevel fast multipole algorithm（FE-BI-MLFMA）in this paper.A simple computation model for slotted-waveguide antenna is presented by using thin current probe excitation and perfectly matched layer（PML）absorber.Since each slotted-waveguide antenna can be considered as a single sub-domain,the domain decomposition algorithm（DDA）can be applied to FE-BI-MLFMA to greatly reduce the computation resources and achieve high efficiency.This DDA-FE-BI-MLMFA is parallelized to further strength its capability.The comparisons of the computed radiation patterns with measured data and results from the commercial software show that our method has good accuracy for slottedwaveguide array.Then the influence of mutual coupling between adjacent slotted-waveguides is studied.To demonstrate capability of the presented method,a carefully designed large X-band slotted-waveguide antenna array containing eighteen waveguides with Taylor amplitude and inverse phase excitation distribution are analyzed in the paper.展开更多
A new and upcoming application is the use of 60 GHz antennas for high date rate point-to-point connections to serve Gigabit(Gi-Fi)w ireless communications.The design of M illimeter w ave(M m W)antennas has to cope w i...A new and upcoming application is the use of 60 GHz antennas for high date rate point-to-point connections to serve Gigabit(Gi-Fi)w ireless communications.The design of M illimeter w ave(M m W)antennas has to cope w ith the unadorned influences of manufacturing tolerances and losses at 60 GHz.In this paper,the concept of Substrate Integrated Waveguide(SIW)and Exponentially Tapered Slot(ETS)antenna w ere used together to design a high gain,efficient planar dielectric loaded antenna for M m W Gi-Fi w ireless communications at 60 GHz.The SIW is used to feed the antenna and a dielectric is utilized in front of the antenna to increase the gain.The dielectric loaded ETS antenna and compact SIW feed w ere fabricated on a single substrate,resulting in low cost and easy fabrication.The antenna w ith elliptical shaped dielectric loaded w as fabricated using printed circuit board process.The measured gain of the single element antenna is 10.2 dB,w hile the radiation efficiency of 96.84%is obtained at 60 GHz.The Y-junction SIW pow er divider is used to form a 1×4 array structure.M easured gain of the 1×4 array antenna is 13.3 dB,w hile the measured radiation pattern and gain are almost constant w ithin the w ide bandw idth of the antenna.展开更多
Monopulse slot antenna arrays based on substrate integrated waveguide （SIW） are proposed for the application of 60 GHz mono- pulse tracking systems in this paper. The sum-difference monopulse comparator can provide ...Monopulse slot antenna arrays based on substrate integrated waveguide （SIW） are proposed for the application of 60 GHz mono- pulse tracking systems in this paper. The sum-difference monopulse comparator can provide a high amplitude and phase balance over wide frequency band and no phase delay technique is required for the difference channel. Resonant slot antennas are adopted as the radiating elements since they can be integrated with the sum-difference monopulse comparator in a single layer with a compact size. Two monopulse arrays with 2× 4 and 4×4 slot elements are designed, fabricated, and measured. Measured results show that the proposed antenna arrays have wide bandwidth covering the unlicensed 60-GHz band. The peak sum beam gain is 13.85 dBi for the 2 ×4 element array and 16.24 dBi for the 4×4 element array. The peak difference beam gain is 11.20 dBi for the 2×4 element array and 12.11 dBi for the 4×4 element array and the maximum null depth can reach -40 dB.展开更多
We present a silicon slot waveguide with metallic gratings embedded on the silicon surface in the slot region. The dependence of the optical coupling between two silicon wires on the width of the metal gap and the slo...We present a silicon slot waveguide with metallic gratings embedded on the silicon surface in the slot region. The dependence of the optical coupling between two silicon wires on the width of the metal gap and the slot size are studied in detail. The results show that the optical field in the slot region with metallic gratings is significantly enhanced compared with the traditional slot waveguide due to the surface plasmon polaritons coupling on metallic gratings. The extraordinary optical confinement is attributed to the low effective dielectric constant of metallic gratings. The effective dielectric constant decreases with the increasing wavelength, and reaches the minimum when the width of the metal gap is about 0.01 times the wavelength.展开更多
A novel approach devoted to achieving ultra-wideband radar cross section reduction（RCSR） of a waveguide slot antenna array（WGSAA） while maintaining its radiation performance is proposed. Three kinds of artificial ...A novel approach devoted to achieving ultra-wideband radar cross section reduction（RCSR） of a waveguide slot antenna array（WGSAA） while maintaining its radiation performance is proposed. Three kinds of artificial magnetic conductors（AMCs） tiles consisting of three types of basic units resonant at different frequencies are designed and arranged in a novel quadruple-triangle-type configuration to create a composite planar metasurface. The proposed metasurface is characterized by low radar feature over an ultra-wideband based on the principle of phase cancellation. Both simulated and measured results demonstrate that after the composite metasurface is used to cover part of the antenna array, an ultrawideband RCSR involving in-band and out-of-band is achieved for co-and cross-polarized incident waves based on energy cancellation, while the radiation performance is well retained. The proposed method is simple, low-cost, and easy-tofabricate, providing a new method for ultra-wideband RCSR of an antenna array. Moreover, the method proposed in this paper can easily be applied to other antenna architectures.展开更多
This article introduces the design theory of ceramic waveguide filter and proposes a new type of negative coupling structure with a conical throughhole,which has fine-adjustment of negative coupling without significan...This article introduces the design theory of ceramic waveguide filter and proposes a new type of negative coupling structure with a conical throughhole,which has fine-adjustment of negative coupling without significantly increasing the insertion loss of the filter.Based on this,the article proposes an eightcavity ceramic waveguide filter design for 5G base stations.It also presents a detailed discussion on the influence of the cross-coupling slot lengths L2 and L4 on the transmission zeros positions during the filter optimization process and the relevant change rules.For the proposed optimized filter,the observed performance indicators include the center frequency of 3.5 GHz,working bandwidth of 200 MHz,an insertion loss of≤2.0 dB,return loss of≥19 dB,and out-of-band nearend suppression and out-of-band far-end suppression of≥39 dB and≥63 dB,respectively.The test performance results obtained for the sample,with structural parameters as per the simulation model,were in good agreement with the simulation results.展开更多
基金Supported by the National Key Basic Research Program(973 Program)(2012CB720702,61320602)the 111 Project of China(B14010)the National Natural Science Foundation of China(61371002)
文摘An efficient analyzing approach is presented for large slotted-waveguide antenna arrays by using hybrid finite element-boundary integral-multilevel fast multipole algorithm（FE-BI-MLFMA）in this paper.A simple computation model for slotted-waveguide antenna is presented by using thin current probe excitation and perfectly matched layer（PML）absorber.Since each slotted-waveguide antenna can be considered as a single sub-domain,the domain decomposition algorithm（DDA）can be applied to FE-BI-MLFMA to greatly reduce the computation resources and achieve high efficiency.This DDA-FE-BI-MLMFA is parallelized to further strength its capability.The comparisons of the computed radiation patterns with measured data and results from the commercial software show that our method has good accuracy for slottedwaveguide array.Then the influence of mutual coupling between adjacent slotted-waveguides is studied.To demonstrate capability of the presented method,a carefully designed large X-band slotted-waveguide antenna array containing eighteen waveguides with Taylor amplitude and inverse phase excitation distribution are analyzed in the paper.
基金the DRDO,Government of India for providing financial patronage in executing this research work
文摘A new and upcoming application is the use of 60 GHz antennas for high date rate point-to-point connections to serve Gigabit(Gi-Fi)w ireless communications.The design of M illimeter w ave(M m W)antennas has to cope w ith the unadorned influences of manufacturing tolerances and losses at 60 GHz.In this paper,the concept of Substrate Integrated Waveguide(SIW)and Exponentially Tapered Slot(ETS)antenna w ere used together to design a high gain,efficient planar dielectric loaded antenna for M m W Gi-Fi w ireless communications at 60 GHz.The SIW is used to feed the antenna and a dielectric is utilized in front of the antenna to increase the gain.The dielectric loaded ETS antenna and compact SIW feed w ere fabricated on a single substrate,resulting in low cost and easy fabrication.The antenna w ith elliptical shaped dielectric loaded w as fabricated using printed circuit board process.The measured gain of the single element antenna is 10.2 dB,w hile the radiation efficiency of 96.84%is obtained at 60 GHz.The Y-junction SIW pow er divider is used to form a 1×4 array structure.M easured gain of the 1×4 array antenna is 13.3 dB,w hile the measured radiation pattern and gain are almost constant w ithin the w ide bandw idth of the antenna.
基金This project is supported by the National Basic Research Program of China （＂973＂ Program） under Grant No. 2014CB339900 and the National Natural Science Foundation of China under Grant No. 61372056.
文摘Monopulse slot antenna arrays based on substrate integrated waveguide （SIW） are proposed for the application of 60 GHz mono- pulse tracking systems in this paper. The sum-difference monopulse comparator can provide a high amplitude and phase balance over wide frequency band and no phase delay technique is required for the difference channel. Resonant slot antennas are adopted as the radiating elements since they can be integrated with the sum-difference monopulse comparator in a single layer with a compact size. Two monopulse arrays with 2× 4 and 4×4 slot elements are designed, fabricated, and measured. Measured results show that the proposed antenna arrays have wide bandwidth covering the unlicensed 60-GHz band. The peak sum beam gain is 13.85 dBi for the 2 ×4 element array and 16.24 dBi for the 4×4 element array. The peak difference beam gain is 11.20 dBi for the 2×4 element array and 12.11 dBi for the 4×4 element array and the maximum null depth can reach -40 dB.
基金Supported by the Key Grant Project of the Ministry of Education of China under Grant No 313007
文摘We present a silicon slot waveguide with metallic gratings embedded on the silicon surface in the slot region. The dependence of the optical coupling between two silicon wires on the width of the metal gap and the slot size are studied in detail. The results show that the optical field in the slot region with metallic gratings is significantly enhanced compared with the traditional slot waveguide due to the surface plasmon polaritons coupling on metallic gratings. The extraordinary optical confinement is attributed to the low effective dielectric constant of metallic gratings. The effective dielectric constant decreases with the increasing wavelength, and reaches the minimum when the width of the metal gap is about 0.01 times the wavelength.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61671464,61701523,and 61471389)
文摘A novel approach devoted to achieving ultra-wideband radar cross section reduction（RCSR） of a waveguide slot antenna array（WGSAA） while maintaining its radiation performance is proposed. Three kinds of artificial magnetic conductors（AMCs） tiles consisting of three types of basic units resonant at different frequencies are designed and arranged in a novel quadruple-triangle-type configuration to create a composite planar metasurface. The proposed metasurface is characterized by low radar feature over an ultra-wideband based on the principle of phase cancellation. Both simulated and measured results demonstrate that after the composite metasurface is used to cover part of the antenna array, an ultrawideband RCSR involving in-band and out-of-band is achieved for co-and cross-polarized incident waves based on energy cancellation, while the radiation performance is well retained. The proposed method is simple, low-cost, and easy-tofabricate, providing a new method for ultra-wideband RCSR of an antenna array. Moreover, the method proposed in this paper can easily be applied to other antenna architectures.
基金supported by the National Natural Science Fund Joint Fund Project(No.U21B2068)the Major Science and Technology Innovation Project of WenZhou(No.ZG2021014).
文摘This article introduces the design theory of ceramic waveguide filter and proposes a new type of negative coupling structure with a conical throughhole,which has fine-adjustment of negative coupling without significantly increasing the insertion loss of the filter.Based on this,the article proposes an eightcavity ceramic waveguide filter design for 5G base stations.It also presents a detailed discussion on the influence of the cross-coupling slot lengths L2 and L4 on the transmission zeros positions during the filter optimization process and the relevant change rules.For the proposed optimized filter,the observed performance indicators include the center frequency of 3.5 GHz,working bandwidth of 200 MHz,an insertion loss of≤2.0 dB,return loss of≥19 dB,and out-of-band nearend suppression and out-of-band far-end suppression of≥39 dB and≥63 dB,respectively.The test performance results obtained for the sample,with structural parameters as per the simulation model,were in good agreement with the simulation results.
