The current-voltage characteristics of 4H-SiC junction barrier Schottky （JBS） diodes terminated by an offset field plate have been measured in the temperature range of 25-300℃. An experimental barrier height value ...The current-voltage characteristics of 4H-SiC junction barrier Schottky （JBS） diodes terminated by an offset field plate have been measured in the temperature range of 25-300℃. An experimental barrier height value of about 0.5 eV is obtained for the Ti/4H-SiC JBS diodes at room temperature. A decrease in the experimental barrier height and an increase in the ideality factor with decreasing temperature are shown. Reverse recovery testing also shows the temperature dependence of the peak recovery current density and the reverse recovery time. Finally, a discussion of reducing the reverse recovery time is presented.展开更多
This paper stuides the structures of 4H SiC floating junction Schottky barrier diodes. Some structure parameters of devices are optimized with commercial simulator based on forward and reverse electrical characteristi...This paper stuides the structures of 4H SiC floating junction Schottky barrier diodes. Some structure parameters of devices are optimized with commercial simulator based on forward and reverse electrical characteristics. Compared with conventional power Schottky barrier diodes, the devices are featured by highly doped drift region and embedded floating junction layers, which can ensure high breakdown voltage while keeping lower specific on-state resistance, and solve the contradiction between forward voltage drop and breakdown voltage. The simulation results show that with optimized structure parameter, the breakdown voltage can reach 4.36 kV and the specific on-resistance is 5.8 mΩ.cm2 when the Baliga figure of merit value of 13.1 GW/cm2 is achieved.展开更多
This paper develops a new and easy to implement analytical model for the specific on-resistance and electric field distribution along the critical path for 4H-SiC multi-floating junction Schottky barrier diode. Consid...This paper develops a new and easy to implement analytical model for the specific on-resistance and electric field distribution along the critical path for 4H-SiC multi-floating junction Schottky barrier diode. Considering the charge compensation effects by the multilayer of buried opposite doped regions, it improves the breakdown voltage a lot in comparison with conventional one with the same on-resistance. The forward resistance of the floating junction Schottky barrier diode consists of several components and the electric field can be understood with superposition concept, both are consistent with MEDICI simulation results. Moreover, device parameters are optimized and the analyses show that in comparison with one layer floating junction, multilayer of floating junction layer is an effective way to increase the device performance when specific resistance and the breakdown voltage are traded off. The results show that the specific resistance increases 3.2 mΩ.cm2 and breakdown voltage increases 422 V with an additional floating junction for the given structure.展开更多
In this paper, a 4H-SiC semi-superjunction （S J） Schottky barrier diode is analysed and simulated. The semi-SJ structure has an optimized design and a specific on-resistance lower than that of conventional SJ struct...In this paper, a 4H-SiC semi-superjunction （S J） Schottky barrier diode is analysed and simulated. The semi-SJ structure has an optimized design and a specific on-resistance lower than that of conventional SJ structures, which can be achieved without increasing the process difficulty. The simulation results show that the specific on-resistance and the softness factor depend on the aspect and thickness ratios, and that by using the semi-SJ structure, specific on-resistance can be reduced without decreasing the softness factor. It is observed that a trade-off exists between the specific on-resistance and the softness of the diode.展开更多
This paper reports that the 4H-SiC Schottky barrier diode, PiN diode and junction barrier Schottky diode terminated by field guard rings are designed, fabricated and characterised. The measurements for forward and rev...This paper reports that the 4H-SiC Schottky barrier diode, PiN diode and junction barrier Schottky diode terminated by field guard rings are designed, fabricated and characterised. The measurements for forward and reverse characteristics have been done, and by comparison with each other, it shows that junction barrier Schottky diode has a lower reverse current density than that of the Schottky barrier diode and a higher forward drop than that of the PiN diode. High-temperature annealing is presented in this paper as well to figure out an optimised processing. The barrier height of 0.79 eV is formed with Ti in this work, the forward drop for the Schottky diode is 2.1 V, with an ideality factor of 3.2, and junction barrier Schottky diode with blocking voltage higher than 400 V was achieved by using field guard ring termination.展开更多
The 4H-SiC junction barrier Schottky （JBS） diodes terminated by field guard rings and offset field plate are designed, fabricated and characterized. It is shown experimentally that a 3-μm P-type implantation window...The 4H-SiC junction barrier Schottky （JBS） diodes terminated by field guard rings and offset field plate are designed, fabricated and characterized. It is shown experimentally that a 3-μm P-type implantation window spacing gives an optimum trade-off between forward drop voltage and leakage current density for these diodes, yielding a specific on-resistance of 8.3 mΩ-cm2. A JBS diode with a turn-on voltage of 0.65 V and a reverse current density less than 1 A/cm2 under 500 V is fabricated, and the reverse recovery time is tested to be 80 ns, and the peak reverse current is 28.1 mA. Temperature-dependent characteristics are also studied in a temperature range of 75 °C-200 °C. The diode shows a stable Schottky barrier height of up to 200°C and a stable operation under a continuous forward current of 100 A/cm2.展开更多
4H-SiC junction barrier Schottky （JBS） diodes with a high-temperature annealed resistive termination extension （HARTE） are designed, fabricated and characterized in this work. The differential specific on-state re...4H-SiC junction barrier Schottky （JBS） diodes with a high-temperature annealed resistive termination extension （HARTE） are designed, fabricated and characterized in this work. The differential specific on-state resistance of the device is as low as 3.64 mΩ·cm^2 with a total active area of 2.46× 10 ^-3 cm^2. Ti is the Schottky contact metal with a Schottky barrier height of 1.08 V and a low onset voltage of 0.7 V. The ideality factor is calculated to be 1.06. Al implantation annealing is performed at 1250 ℃ in Ar, while good reverse characteristics are achieved. The maximum breakdown voltage is 1000 V with a leakage current of 9× 10^-5 A on chip level. These experimental results show good consistence with the simulation results and demonstrate that high-performance 4H-SiC JBS diodes can be obtained based on the double HARTE structure.展开更多
A novel junction terminal extension structure is proposed for vertical diamond Schottky barrier diodes(SBDs) by using an n-Ga_(2)O_(3)/p-diamond heterojunction. The depletion region of the heterojunction suppresses pa...A novel junction terminal extension structure is proposed for vertical diamond Schottky barrier diodes(SBDs) by using an n-Ga_(2)O_(3)/p-diamond heterojunction. The depletion region of the heterojunction suppresses part of the forward current conduction path, which slightly increases the on-resistance. On the other hand, the reverse breakdown voltage is enhanced obviously because of attenuated electric field crowding. By optimizing the doping concentration, length, and depth of n-Ga_(2)O_(3), the trade-off between on-resistance and breakdown voltage with a high Baliga figure of merit(FOM)value is realized through Silvaco technology computer-aided design simulation. In addition, the effect of the work functions of the Schottky electrodes is evaluated. The results are beneficial to realizing a high-performance vertical diamond SBD.展开更多
The trench diamond junction barrier Schottky(JBS)diode with a sidewall enhanced structure is designed by Silvaco simulation.Comparing with the conventional trench JBS diode,Schottky contact areas are introduced on the...The trench diamond junction barrier Schottky(JBS)diode with a sidewall enhanced structure is designed by Silvaco simulation.Comparing with the conventional trench JBS diode,Schottky contact areas are introduced on the sidewall of the trench beside the top cathode.The sidewall Schottky contact weakens the junction field-effect transistor effect between the trenches to realize a low on-resistance and a high Baliga's figure of merit(FOM)value.In addition,the existence of the n-type diamond helps to suppress the electric field crowding effect and enhance the reverse breakdown voltage.With the optimal parameters of device structure,a high Baliga's FOM value of 2.28 GW/cm^(2) is designed.Therefore,the proposed sidewall-enhanced trench JBS diode is a promising component for the applications in diamond power electronics.展开更多
A vertical junction barrier Schottky diode with a high-K/low-K compound dielectric structure is proposed and optimized to achieve a high breakdown voltage(BV).There is a discontinuity of the electric field at the inte...A vertical junction barrier Schottky diode with a high-K/low-K compound dielectric structure is proposed and optimized to achieve a high breakdown voltage(BV).There is a discontinuity of the electric field at the interface of high-K and low-K layers due to the different dielectric constants of high-K and low-K dielectric layers.A new electric field peak is introduced in the n-type drift region of junction barrier Schottky diode(JBS),so the distribution of electric field in JBS becomes more uniform.At the same time,the effect of electric-power line concentration at the p-n junction interface is suppressed due to the effects of the high-K dielectric layer and an enhancement of breakdown voltage can be achieved.Numerical simulations demonstrate that GaN JBS with a specific on-resistance(R_(on,sp)) of 2.07 mΩ·cm^(2) and a BV of 4171 V which is 167% higher than the breakdown voltage of the common structure,resulting in a high figure-of-merit(FOM) of 8.6 GW/cm^(2),and a low turn-on voltage of 0.6 V.展开更多
Based on the theoretical analysis of the 4H-SiC Schottky-barrier diodes （SBDs） with field plate termination, 4H-SiC SBD with semi-insulating polycrystalline silicon （SIPOS） FP termination has been fabricated. The ...Based on the theoretical analysis of the 4H-SiC Schottky-barrier diodes （SBDs） with field plate termination, 4H-SiC SBD with semi-insulating polycrystalline silicon （SIPOS） FP termination has been fabricated. The relative dielectric con-stant of the SIPOS dielectric first used in 4H-SiC devices is 10.4, which is much higher than that of the SiO2 dielectric, leading to benefitting the performance of devices. The breakdown voltage of the fabricated SBD could reach 1200 V at leak-age current 20 μA, about 70% of the theoretical breakdown voltage. Meanwhile, both of the simulation and experimental results show that the length of the SIPOS FP termination is an important factor for structure design.展开更多
This paper describes the successful fabrication of 4H-SiC junction barrier Schottky （JBS） rectifiers with a linearly graded field limiting ring （LG-FLR）. Linearly variable ring spacings for the FLR termination are...This paper describes the successful fabrication of 4H-SiC junction barrier Schottky （JBS） rectifiers with a linearly graded field limiting ring （LG-FLR）. Linearly variable ring spacings for the FLR termination are applied to improve the blocking voltage by reducing the peak surface electric field at the edge termination region, which acts like a variable lateral doping profile resulting in a gradual field distribution. The experimental results demonstrate a breakdown voltage of 5 kV at the reverse leakage current density of 2 mA/cm2 （about 80% of the theoretical value）. Detailed numerical simulations show that the proposed termination structure provides a uniform electric field profile compared to the conventional FLR termi- nation, which is responsible for 45% improvement in the reverse blocking voltage despite a 3.7% longer total termination length.展开更多
This paper proposes a double epi-layers 4H-SiC junction barrier Schottky rectifier （JBSR） with embedded P layer （EPL） in the drift region. The structure is characterized by the P-type layer formed in the n-type dr...This paper proposes a double epi-layers 4H-SiC junction barrier Schottky rectifier （JBSR） with embedded P layer （EPL） in the drift region. The structure is characterized by the P-type layer formed in the n-type drift layer by epitaxial overgrowth process. The electric field and potential distribution are changed due to the buried P-layer, resulting in a high breakdown voltage （BV） and low specific on-resistance （Ron,sp）. The influences of device parameters, such as the depth of the embedded P＋ regions, the space between them and the doping concentration of the drift region, etc., on BV and Ron,sp are investigated by simulations, which provides a particularly useful guideline for the optimal design of the device. The results indicate that BV is increased by 48.5% and Baliga＇s figure of merit （BFOM） is increased by 67.9% compared to a conventional 4H-SiC JBSR.展开更多
In this paper, a mixed terminal structure for the 4H-SiC merged PiN/Schottky diode （MPS） is investigated, which is a combination of a field plate, a junction termination extension and floating limiting rings. Optimi...In this paper, a mixed terminal structure for the 4H-SiC merged PiN/Schottky diode （MPS） is investigated, which is a combination of a field plate, a junction termination extension and floating limiting rings. Optimization is performed on the terminal structure by using the ISE-TCAD. Further analysis shows that this structure can greatly reduce the sensitivity of the breakdown voltage to the doping concentration and can effectively suppress the effect of the interface charge compared with the structure of the junction termination extension. At the same time, the 4H-SiC MPS with this termination structure can reach a high and stable breakdown voltage.展开更多
In this paper, we investigate the influence of deep level defects on the electrical properties of Ni/4H-SiC Schottky diodes by analyzing device current-voltage(I-V) characteristics and deep-level transient spectra(DLT...In this paper, we investigate the influence of deep level defects on the electrical properties of Ni/4H-SiC Schottky diodes by analyzing device current-voltage(I-V) characteristics and deep-level transient spectra(DLTS). Two Schottky barrier heights(SBHs) with different temperature dependences are found in Ni/4 H-SiC Schottky diode above room temperature. DLTS measurements further reveal that two kinds of defects Z_(1/2) and Ti(c)~a are located near the interface between Ni and SiC with the energy levels of E_C-0.67 eV and E_C-0.16 eV respectively. The latter one as the ionized titanium acceptor residing at cubic Si lattice site is thought to be responsible for the low SBH in the localized region of the diode, and therefore inducing the high reverse leakage current of the diode. The experimental results indicate that the Ti(c)~a defect has a strong influence on the electrical and thermal properties of the 4 H-SiC Schottky diode.展开更多
基金Project supported by the National Natural Science Foundation of China (Grant No. 61006060)the 13115 Innovation Engineering of Shaanxi, China (Grant No. 2008ZDKG-30)the Key Laboratory Fund of Ministry of Education, China (Grant No. JY0100112501)
文摘The current-voltage characteristics of 4H-SiC junction barrier Schottky （JBS） diodes terminated by an offset field plate have been measured in the temperature range of 25-300℃. An experimental barrier height value of about 0.5 eV is obtained for the Ti/4H-SiC JBS diodes at room temperature. A decrease in the experimental barrier height and an increase in the ideality factor with decreasing temperature are shown. Reverse recovery testing also shows the temperature dependence of the peak recovery current density and the reverse recovery time. Finally, a discussion of reducing the reverse recovery time is presented.
基金Project supported by the Open Fund of Key Laboratory of Wide Bandgap Semiconductor Materials and Devices, Ministry of Education of China
文摘This paper stuides the structures of 4H SiC floating junction Schottky barrier diodes. Some structure parameters of devices are optimized with commercial simulator based on forward and reverse electrical characteristics. Compared with conventional power Schottky barrier diodes, the devices are featured by highly doped drift region and embedded floating junction layers, which can ensure high breakdown voltage while keeping lower specific on-state resistance, and solve the contradiction between forward voltage drop and breakdown voltage. The simulation results show that with optimized structure parameter, the breakdown voltage can reach 4.36 kV and the specific on-resistance is 5.8 mΩ.cm2 when the Baliga figure of merit value of 13.1 GW/cm2 is achieved.
基金Project supported by the Open Fund of Key Laboratory of Wide Bandgap Semiconductor Materials and Devices, Ministry of Education of China
文摘This paper develops a new and easy to implement analytical model for the specific on-resistance and electric field distribution along the critical path for 4H-SiC multi-floating junction Schottky barrier diode. Considering the charge compensation effects by the multilayer of buried opposite doped regions, it improves the breakdown voltage a lot in comparison with conventional one with the same on-resistance. The forward resistance of the floating junction Schottky barrier diode consists of several components and the electric field can be understood with superposition concept, both are consistent with MEDICI simulation results. Moreover, device parameters are optimized and the analyses show that in comparison with one layer floating junction, multilayer of floating junction layer is an effective way to increase the device performance when specific resistance and the breakdown voltage are traded off. The results show that the specific resistance increases 3.2 mΩ.cm2 and breakdown voltage increases 422 V with an additional floating junction for the given structure.
基金Project supported by the National Natural Science Foundation of China(Grant No.60876050)the Research Fund for Excellent Doctor Degree Thesis of Xi'an University of Technology,China
文摘In this paper, a 4H-SiC semi-superjunction （S J） Schottky barrier diode is analysed and simulated. The semi-SJ structure has an optimized design and a specific on-resistance lower than that of conventional SJ structures, which can be achieved without increasing the process difficulty. The simulation results show that the specific on-resistance and the softness factor depend on the aspect and thickness ratios, and that by using the semi-SJ structure, specific on-resistance can be reduced without decreasing the softness factor. It is observed that a trade-off exists between the specific on-resistance and the softness of the diode.
基金supported by the 13115 Innovation Engineering of Shanxi (Grant No.2008ZDKG-30)
文摘This paper reports that the 4H-SiC Schottky barrier diode, PiN diode and junction barrier Schottky diode terminated by field guard rings are designed, fabricated and characterised. The measurements for forward and reverse characteristics have been done, and by comparison with each other, it shows that junction barrier Schottky diode has a lower reverse current density than that of the Schottky barrier diode and a higher forward drop than that of the PiN diode. High-temperature annealing is presented in this paper as well to figure out an optimised processing. The barrier height of 0.79 eV is formed with Ti in this work, the forward drop for the Schottky diode is 2.1 V, with an ideality factor of 3.2, and junction barrier Schottky diode with blocking voltage higher than 400 V was achieved by using field guard ring termination.
基金supported by the National Natural Science Foundation of China(Grant No.61006060)the 13115 Innovation Engineering of Shaanxi Province,China(Grant No.2008ZDKG-30)
文摘The 4H-SiC junction barrier Schottky （JBS） diodes terminated by field guard rings and offset field plate are designed, fabricated and characterized. It is shown experimentally that a 3-μm P-type implantation window spacing gives an optimum trade-off between forward drop voltage and leakage current density for these diodes, yielding a specific on-resistance of 8.3 mΩ-cm2. A JBS diode with a turn-on voltage of 0.65 V and a reverse current density less than 1 A/cm2 under 500 V is fabricated, and the reverse recovery time is tested to be 80 ns, and the peak reverse current is 28.1 mA. Temperature-dependent characteristics are also studied in a temperature range of 75 °C-200 °C. The diode shows a stable Schottky barrier height of up to 200°C and a stable operation under a continuous forward current of 100 A/cm2.
基金supported by the National Natural Science Foundation of China (Grant No. 51102225)the Natural Science Foundation of Beijing City, China (Grant No. 4132076)the Youth Innovation Promotion Association, Chinese Academy of Sciences
文摘4H-SiC junction barrier Schottky （JBS） diodes with a high-temperature annealed resistive termination extension （HARTE） are designed, fabricated and characterized in this work. The differential specific on-state resistance of the device is as low as 3.64 mΩ·cm^2 with a total active area of 2.46× 10 ^-3 cm^2. Ti is the Schottky contact metal with a Schottky barrier height of 1.08 V and a low onset voltage of 0.7 V. The ideality factor is calculated to be 1.06. Al implantation annealing is performed at 1250 ℃ in Ar, while good reverse characteristics are achieved. The maximum breakdown voltage is 1000 V with a leakage current of 9× 10^-5 A on chip level. These experimental results show good consistence with the simulation results and demonstrate that high-performance 4H-SiC JBS diodes can be obtained based on the double HARTE structure.
基金Project supported by the Key Research and Development Program of Guangdong Province, China (Grant No. 2020B0101690001)the Natural Science Foundation of Sichuan Province, China (Grant No. 2022NSFSC0886)。
文摘A novel junction terminal extension structure is proposed for vertical diamond Schottky barrier diodes(SBDs) by using an n-Ga_(2)O_(3)/p-diamond heterojunction. The depletion region of the heterojunction suppresses part of the forward current conduction path, which slightly increases the on-resistance. On the other hand, the reverse breakdown voltage is enhanced obviously because of attenuated electric field crowding. By optimizing the doping concentration, length, and depth of n-Ga_(2)O_(3), the trade-off between on-resistance and breakdown voltage with a high Baliga figure of merit(FOM)value is realized through Silvaco technology computer-aided design simulation. In addition, the effect of the work functions of the Schottky electrodes is evaluated. The results are beneficial to realizing a high-performance vertical diamond SBD.
基金Project supported by the Key Research and Development Program of Guangdong Province,China(Grant No.2020B0101690001)the Natural Science Foundation of Sichuan Province,China(Grant No.2022NSFSC0886)the Open Project of State Key Laboratory of Superhard Materials,Jilin Province,China(Grant No.202314)。
文摘The trench diamond junction barrier Schottky(JBS)diode with a sidewall enhanced structure is designed by Silvaco simulation.Comparing with the conventional trench JBS diode,Schottky contact areas are introduced on the sidewall of the trench beside the top cathode.The sidewall Schottky contact weakens the junction field-effect transistor effect between the trenches to realize a low on-resistance and a high Baliga's figure of merit(FOM)value.In addition,the existence of the n-type diamond helps to suppress the electric field crowding effect and enhance the reverse breakdown voltage.With the optimal parameters of device structure,a high Baliga's FOM value of 2.28 GW/cm^(2) is designed.Therefore,the proposed sidewall-enhanced trench JBS diode is a promising component for the applications in diamond power electronics.
基金Project supported by the National Natural Science Foundation of China (Grant No.61376078)the Natural Science Foundation of Sichuan Province,China (Grant No.2022NSFSC0515)。
文摘A vertical junction barrier Schottky diode with a high-K/low-K compound dielectric structure is proposed and optimized to achieve a high breakdown voltage(BV).There is a discontinuity of the electric field at the interface of high-K and low-K layers due to the different dielectric constants of high-K and low-K dielectric layers.A new electric field peak is introduced in the n-type drift region of junction barrier Schottky diode(JBS),so the distribution of electric field in JBS becomes more uniform.At the same time,the effect of electric-power line concentration at the p-n junction interface is suppressed due to the effects of the high-K dielectric layer and an enhancement of breakdown voltage can be achieved.Numerical simulations demonstrate that GaN JBS with a specific on-resistance(R_(on,sp)) of 2.07 mΩ·cm^(2) and a BV of 4171 V which is 167% higher than the breakdown voltage of the common structure,resulting in a high figure-of-merit(FOM) of 8.6 GW/cm^(2),and a low turn-on voltage of 0.6 V.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61234006 and 61274079)the Key Specific Projects of Ministry of Education of China(Grant No.625010101)the Science Project of State Grid,China(Grant No.SGRI-WD-71-13-004)
文摘Based on the theoretical analysis of the 4H-SiC Schottky-barrier diodes （SBDs） with field plate termination, 4H-SiC SBD with semi-insulating polycrystalline silicon （SIPOS） FP termination has been fabricated. The relative dielectric con-stant of the SIPOS dielectric first used in 4H-SiC devices is 10.4, which is much higher than that of the SiO2 dielectric, leading to benefitting the performance of devices. The breakdown voltage of the fabricated SBD could reach 1200 V at leak-age current 20 μA, about 70% of the theoretical breakdown voltage. Meanwhile, both of the simulation and experimental results show that the length of the SIPOS FP termination is an important factor for structure design.
基金Project supported by the State Key Program of the National Natural Science Foundation of China(Grant No.61234006)
文摘This paper describes the successful fabrication of 4H-SiC junction barrier Schottky （JBS） rectifiers with a linearly graded field limiting ring （LG-FLR）. Linearly variable ring spacings for the FLR termination are applied to improve the blocking voltage by reducing the peak surface electric field at the edge termination region, which acts like a variable lateral doping profile resulting in a gradual field distribution. The experimental results demonstrate a breakdown voltage of 5 kV at the reverse leakage current density of 2 mA/cm2 （about 80% of the theoretical value）. Detailed numerical simulations show that the proposed termination structure provides a uniform electric field profile compared to the conventional FLR termi- nation, which is responsible for 45% improvement in the reverse blocking voltage despite a 3.7% longer total termination length.
基金Project supported by the 13115 Innovation Engineering of Shaanxi Province of China(Grant No.2008ZDKG-30)
文摘This paper proposes a double epi-layers 4H-SiC junction barrier Schottky rectifier （JBSR） with embedded P layer （EPL） in the drift region. The structure is characterized by the P-type layer formed in the n-type drift layer by epitaxial overgrowth process. The electric field and potential distribution are changed due to the buried P-layer, resulting in a high breakdown voltage （BV） and low specific on-resistance （Ron,sp）. The influences of device parameters, such as the depth of the embedded P＋ regions, the space between them and the doping concentration of the drift region, etc., on BV and Ron,sp are investigated by simulations, which provides a particularly useful guideline for the optimal design of the device. The results indicate that BV is increased by 48.5% and Baliga＇s figure of merit （BFOM） is increased by 67.9% compared to a conventional 4H-SiC JBSR.
基金supported by the National Natural Science Foundation of China(Grant No.61006060)the Shaanxi Provincial 13115 Innovation Engineering,China(Grant No.2008ZDKG-30)
文摘In this paper, a mixed terminal structure for the 4H-SiC merged PiN/Schottky diode （MPS） is investigated, which is a combination of a field plate, a junction termination extension and floating limiting rings. Optimization is performed on the terminal structure by using the ISE-TCAD. Further analysis shows that this structure can greatly reduce the sensitivity of the breakdown voltage to the doping concentration and can effectively suppress the effect of the interface charge compared with the structure of the junction termination extension. At the same time, the 4H-SiC MPS with this termination structure can reach a high and stable breakdown voltage.
基金Project supported by the National Key Research and Development Program of China(Grant No.2016YFB0400402)
文摘In this paper, we investigate the influence of deep level defects on the electrical properties of Ni/4H-SiC Schottky diodes by analyzing device current-voltage(I-V) characteristics and deep-level transient spectra(DLTS). Two Schottky barrier heights(SBHs) with different temperature dependences are found in Ni/4 H-SiC Schottky diode above room temperature. DLTS measurements further reveal that two kinds of defects Z_(1/2) and Ti(c)~a are located near the interface between Ni and SiC with the energy levels of E_C-0.67 eV and E_C-0.16 eV respectively. The latter one as the ionized titanium acceptor residing at cubic Si lattice site is thought to be responsible for the low SBH in the localized region of the diode, and therefore inducing the high reverse leakage current of the diode. The experimental results indicate that the Ti(c)~a defect has a strong influence on the electrical and thermal properties of the 4 H-SiC Schottky diode.
