The hydroxyl-terminated self-assembled monolayer(OH-SAM),as a surface resistant to protein adsorption,exhibits substantial potential in applications such as ship navigation and medical implants,and the appropriate str...The hydroxyl-terminated self-assembled monolayer(OH-SAM),as a surface resistant to protein adsorption,exhibits substantial potential in applications such as ship navigation and medical implants,and the appropriate strategies for designing anti-fouling surfaces are crucial.Here,we employ molecular dynamics simulations and alchemical free energy calculations to systematically analyze the factors influencing resistance to protein adsorption on the SAMs terminated with single or double OH groups at three packing densities(∑=2.0 nm^(-2),4.5 nm^(-2),and 6.5 nm^(-2)),respectively.For the first time,we observed that the compactness and order of interfacial water enhance its physical barrier effect,subsequently enhancing the resistance of SAM to protein adsorption.Notably,the spatial hindrance effect of SAM leads to the embedding of protein into SAM,resulting in a lack of resistance of SAM towards protein.Furthermore,the number of hydroxyl groups per unit area of double OH-terminated SAM at ∑=6.5 nm^(-2) is approximately 2 to 3 times that of single OH-terminated SAM at ∑=6.5 nm^(-2) and 4.5 nm^(-2),consequently yielding a weaker resistance of double OH-terminated SAM towards protein.Meanwhile,due to the structure of SAM itself,i.e.,the formation of a nearly perfect ice-like hydrogen bond structure,the SAM exhibits the weakest resistance towards protein.This study will complement and improve the mechanism of OH-SAM resistance to protein adsorption,especially the traditional barrier effect of interfacial water.展开更多
The well controllable selective growth of carbon nanotubes (CNTs)on the desired area is an important issue for their future applications. In this study, a novel method for selective growth of CNTs was proposed by usin...The well controllable selective growth of carbon nanotubes (CNTs)on the desired area is an important issue for their future applications. In this study, a novel method for selective growth of CNTs was proposed by using the technology of self-assembly monolayers (SAMs) and the Fe-assisted CNTs growth. The Si wafers with the a : Si/Si3N4 layer patterns were first prepared by low pressure chemical vapor deposition (LPCVD)and lithography techniques to act as the substrates for selective deposition of SAMs. The selectivity of SAMs from APTMS solution (N-(2-aminoethyl)-3-aminopropyltrimethoxsilane) is based on its greater reactivity of head group on a-Si than Si3N4 films. The areas of pattern with SAMs will first chelate the Fe3+ ions by their diamine-terminated group. The Fe3+ ions were then consolidated to become Fe-hydroxides in sodium boron hydride solution to form the Fe-hydroxides pattern. Finally, the Fe-hydroxides pattern was pretreated in H plasma to become a well-distributed Fe nano-particles on the surface, and followed by CNTs deposition using Fe as catalyst in a microwave plasma-chemical vapor deposition (MP-CVD) system to become the CNTs pattern. The products in each processing step, including microstructures and lattice images of CNTs, were characterized by contact angle measurements, scanning electron microscopy (SEM), XPS, Auger spectroscopy, transmission electron microscopy (TEM) and high resolution TEM (HRTEM)deposition. The results show that the main process parameters include the surface activation process and its atmosphere, consolidation time and temperature, H plasma pretreatment. The function of each processing step will be discussed.展开更多
Inverted perovskite solar cells have gained prominence in industrial advancement due to their easy fabrication,low hysteresis effects,and high stability.Despite these advantages,their efficiency is currently limited b...Inverted perovskite solar cells have gained prominence in industrial advancement due to their easy fabrication,low hysteresis effects,and high stability.Despite these advantages,their efficiency is currently limited by excessive defects and poor carrier transport at the perovskite-electrode interface,particularly at the buried interface between the perovskite and transparent conductive oxide(TCO).Recent efforts in the perovskite community have focused on designing novel self-assembled molecules(SAMs)to improve the quality of the buried interface.However,a notable gap remains in understanding the regulation of atomic-scale interfacial properties of SAMs between the perovskite and TCO interfaces.This understanding is crucial,particularly in terms of identifying chemically active anchoring groups.In this study,we used the star SAM([2-(9H-carbazol-9-yl)ethyl]phosphonic acid)as the base structure to investigate the defect passivation effects of eight common anchoring groups at the perovskite-TCO interface.Our findings indicate that the phosphonic and boric acid groups exhibit notable advantages.These groups fulfill three key criteria:they provide the greatest potential for defect passivation,exhibit stable adsorption with defects,and exert significant regulatory effects on interface dipoles.Ionized anchoring groups exhibit enhanced passivation capabilities for defect energy levels due to their superior Lewis base properties,which effectively neutralize local charges near defects.Among various defect types,iodine vacancies are the easiest to passivate,whereas iodine-substituted lead defects are the most challenging to passivate.Our study provides comprehensive theoretical insights and inspiration for the design of anchoring groups in SAMs,contributing to the ongoing development of more efficient inverted perovskite solar cells.展开更多
In the application of polymer gels to profile control and water shutoff,the gelation time will directly determine whether the gel can"go further"in the formation,but the most of the methods for delaying gel ...In the application of polymer gels to profile control and water shutoff,the gelation time will directly determine whether the gel can"go further"in the formation,but the most of the methods for delaying gel gelation time are complicated or have low responsiveness.There is an urgent need for an effective method for delaying gel gelation time with intelligent response.Inspired by the slow-release effect of drug capsules,this paper uses the self-assembly effect of gas-phase hydrophobic SiO_(2) in aqueous solution as a capsule to prepare an intelligent responsive self-assembled micro-nanocapsules.The capsule slowly releases the cross-linking agent under the stimulation of external conditions such as temperature and pH value,thus delaying gel gelation time.When the pH value is 2 and the concentration of gas-phase hydrophobic SiO_(2) particles is 10%,the gelation time of the capsule gel system at 30,60,90,and 120℃is12.5,13.2,15.2,and 21.1 times longer than that of the gel system without containing capsule,respectively.Compared with other methods,the yield stress of the gel without containing capsules was 78 Pa,and the yield stress after the addition of capsules was 322 Pa.The intelligent responsive self-assembled micronanocapsules prepared by gas-phase hydrophobic silica nanoparticles can not only delay the gel gelation time,but also increase the gel strength.The slow release of cross-linking agent from capsule provides an effective method for prolongating the gelation time of polymer gels.展开更多
The morphology of the copper iodide （CuI） film as an inorganic p-type material has an important influence on enhancing the performance of polymer solar cells （PSCs）. A self-assembled monolayer of 3-aminopropanoic ...The morphology of the copper iodide （CuI） film as an inorganic p-type material has an important influence on enhancing the performance of polymer solar cells （PSCs）. A self-assembled monolayer of 3-aminopropanoic acid （C3-SAM） was used on the surface of indium tin oxide （ITO） before depositing the CuI films. Consequently, a well-distributed and smooth CuI film was formed with pinhole free and complete surface coverage. The root mean square of the corresponding CuI film was reduced from 3.63 nm for ITO/CuI to 0.77 nm. As a result, the average power conversion efficiency （PCE） of PSCs with the device structure of ITO/C3-SAM/CuI/P3HT：PC61BM/ZnO/Al increased significantly from 2.55% （best 2.66%） to 3.04% （best 3.20%） after C3-SAM treatment. This work provides an effective strategy to control the morphology of CuI films through interracial modification and promotes its application in efficient PSCs.展开更多
Forming a monolayer of mixed nickel and gold nanoparticles through self-assembly via simple solution processing constitutes an important step toward inexpensive nanoparticle-based carbon nanofiber growth.In this work,...Forming a monolayer of mixed nickel and gold nanoparticles through self-assembly via simple solution processing constitutes an important step toward inexpensive nanoparticle-based carbon nanofiber growth.In this work,mixed gold and nickel nanoparticles were anchored on the silicon wafer using self-assembled monolayers(SAMs)as a template.SAMs of 3-mercaptopropyl trimethoxysilane(MPTS-SAMs)were formed on silicon wafer,with the exposed thiol functionality providing ligand exchange sites to form the mixed monolayer of nickel and gold nanoparticles via a two-step sequential soaking approach.The densities of the nickel and gold nanoparticles on the surface can be varied by adjusting the soaking sequence.展开更多
Arrays of noble metal nanoparticles show potential applications in （bio-）sensing, optical storage, surface-enhanced spectroscopy, and waveguides. For all such potential devices, controlling the size, morphology, and...Arrays of noble metal nanoparticles show potential applications in （bio-）sensing, optical storage, surface-enhanced spectroscopy, and waveguides. For all such potential devices, controlling the size, morphology, and interparticle spacing of the nanoparticles is very important. Here, we combine seed-mediated growth with nanosphere lithography to study the controllable growth of gold nanoparticles （Au NPs）, in which the self-assembly monolayer of polystyrene （PS） on a silicon surface is used to guide the modification of allaunesilanes and the subsequent adsorption of gold seeds; seed-mediated growth is applied to controlling the morphology and size of Au NPs. The size of adsorption region （determining the number of adsorbed gold seeds） is controlled by etching PS microspheres with oxygen plasma or annealing PS microspheres at the glass transition temperature. The size and morphology of the Au NPs are controlled by changing growth conditions. In such a way, we have achieved the dual control of the obtained Au NPs. Preliminary results show that this strategy holds a great promise. This approach can also be extended to a wide range of materials and substrates.展开更多
This work details a study based on HfS_(2 )transistors utilizing an n-octadecylphosphonic acid-based self-assembled monolayer(SAM)as the gate dielectric.The fabrication of the SAM-based two-dimensional(2D)material tra...This work details a study based on HfS_(2 )transistors utilizing an n-octadecylphosphonic acid-based self-assembled monolayer(SAM)as the gate dielectric.The fabrication of the SAM-based two-dimensional(2D)material transistor is simple and can be used to improve the quality of the interface of air-sensitive 2D materials.In comparison to HfS_(2) transistors utilizing a conventional Al_2O_(3) gate insulator by atomic layer deposition,HfS_(2) transistors utilizing an SAM as the gate dielectric can reduce the operation region from 4 V to 2 V,enhance the field-effect mobility from 0.03 cm^2/Vs to 0.75 cm^2/Vs,improve the sub-threshold swing from 404 m V/dec to 156 m V/dec,and optimize the hysteresis to 0.03 V,thus demonstrating improved quality of the semiconductor/insulator interface.展开更多
Monolayer chemically converted graphene （CCG） nanosheets can be homogeneously self-assembled onto silicon wafer modified by 3-aminopr- opyl triethoxysilane （APTES） to form very thin graphene film. The CCG film was...Monolayer chemically converted graphene （CCG） nanosheets can be homogeneously self-assembled onto silicon wafer modified by 3-aminopr- opyl triethoxysilane （APTES） to form very thin graphene film. The CCG film was characterized by FT-IR, XRD, SEM, TEM and AFM. Results show that CCG sheets formed monolayer film after assembled onto silicon wafer and there is a very tight chemical bond between sheets and wafer. Furthermore, the electrical measurements revealed that the monolayer graphene film has an excellent electrical conductivity.展开更多
In this paper, we use a molecular theory to study the anomalous switching of ssDNA monolayers. Here, both ssDNA- water and water-water hydrogen bonds and their explicit coupling to the ssDNA conformations are consider...In this paper, we use a molecular theory to study the anomalous switching of ssDNA monolayers. Here, both ssDNA- water and water-water hydrogen bonds and their explicit coupling to the ssDNA conformations are considered. We find that hydrogen bonding becomes a key element in inducing the anomalous switching of ssDNA monolayers. This finding accords well with the experimental observations. Based on our theoretical model, we predict that the anomalous switching induced by water vapor will be applicable to a wide range of hydrogen bonds polymers, and ssDNA-water hydrogen bonds and water-water hydrogen bonds hybridization will lead to the hydrogen-bond network formation of 3D ssDNA monolayers.展开更多
Using first-principle calculations, we investigate the mechanical, structural, and electronic properties and formation energy of 25 kinds of Ⅲ–V binary monolayers in detail. A relative radius of the binary compound ...Using first-principle calculations, we investigate the mechanical, structural, and electronic properties and formation energy of 25 kinds of Ⅲ–V binary monolayers in detail. A relative radius of the binary compound according to the atomic number in the periodic table is defined, and based on the definition, the 25 kinds of Ⅲ–V binary compounds are exactly located at a symmetric position in a symmetric matrix. The mechanical properties and band gaps are found to be very dependent on relative radius, while the effective mass of holes and electrons are found to be less dependent. A linear function between Young’s modulus and formation energy is fitted with a linear relation in this paper. The change regularity of physical properties of B–V(V = P, As, Sb, Bi) and Ⅲ–N(Ⅲ = Al, Ga, In, Tl) are found to be very different from those of other Ⅲ–V binary compounds.展开更多
The scaled-up synthesis of organic-free monolayer nanomaterials is highly desirable,especially in obtaining green energy by electrocatalysis.In this study,a method for the scaled-up synthesis of the series of monolaye...The scaled-up synthesis of organic-free monolayer nanomaterials is highly desirable,especially in obtaining green energy by electrocatalysis.In this study,a method for the scaled-up synthesis of the series of monolayer layered double hydroxides(LDHs)without the addition of organic solvents is reported via the separate nucleation and aging steps process.The resulting monolayer LDHs with the thicknesses of less than 1 nm showed a narrow thickness distribution.X-ray absorption fine-structure revealed that monolayer NiFe-LDH nanosheets have a number of oxygen and metal vacancies defects.As a practical application,monolayer NiFe-LDH nanosheets containing defects showed an enhanced electrocatalytic water oxidation activity compared with that of bulk NiFe-LDH.Density functional theory calculations uncovered that excellent catalytic activity is attributed to vacancies defects.The proposed method is an economical and universally applicable strategy for the scaled-up production of monolayer LDHs.展开更多
Recent progress of the preparation and applications of superparamagnetic iron oxide（SPIO） clusters as magnetic resonance imaging（MRI） probes is reviewed with regard to their applications in labeling and tracking c...Recent progress of the preparation and applications of superparamagnetic iron oxide（SPIO） clusters as magnetic resonance imaging（MRI） probes is reviewed with regard to their applications in labeling and tracking cells in vivo, in diagnosis of cardiovascular diseases and tumors, and in drug delivery systems. Magnetic nanoparticles（NPs）, especially SPIO nanoparticles, have long been used as MRI contrast agents and as an advantageous nanoplatform for drug delivery,taking advantage of their unique magnetic properties and ability to function at the molecular and cellular levels. Due to advances in nanotechnology, various means to control SPIO NPs＇ size, composition, magnetization and relaxivity have been developed, as well as ways to usefully modify their surface. Recently, self-assembly of SPIO NP clusters in particulate carriers — such as polymeric micelles, vesicles, liposomes, and layer-by-layer（Lb L） capsules — have been widely studied for application as ultrasensitive MRI probes, owing to their remarkably high spin–spin（T2） relaxivity and convenience for further functionalization.展开更多
We study theoretically the exciton Bose–Einstein condensation and exciton vortices in a two-dimensional(2 D)perovskite(PEA)2 Pb I4 monolayer.Combining the first-principles calculations and the Keldysh model,the excit...We study theoretically the exciton Bose–Einstein condensation and exciton vortices in a two-dimensional(2 D)perovskite(PEA)2 Pb I4 monolayer.Combining the first-principles calculations and the Keldysh model,the exciton binding energy of in a(PEA)2 Pb I4 monolayer can approach hundreds of me V,which make it possible to observe the excitonic effect at room temperature.Due to the large exciton binding energy,and hence the high density of excitons,we find that the critical temperature of the exciton condensation could approach the liquid nitrogen regime.In the presence of perpendicular electric fields,the dipole-dipole interaction between excitons is found to drive the condensed excitons confined in(PEA)2 Pb I4 monolayer flakes into patterned vortices,as the evolution time of vortex patterns is comparable to the exciton lifetime.展开更多
Affibody molecules are small nonimmunoglobulin affinity proteins,which can precisely target to some cancer cells with specific overexpressed molecular signatures.However,the relatively short in vivo half-life of them ...Affibody molecules are small nonimmunoglobulin affinity proteins,which can precisely target to some cancer cells with specific overexpressed molecular signatures.However,the relatively short in vivo half-life of them seriously limited their application in drug targeted delivery for cancer therapy.Here an amphiphilic affibody-drug conjugate is self-assembled into nanomicelles to prolong circulation time for targeted cancer therapy.As an example of the concept,the nanoagent was prepared through molecular self-assembly of the amphiphilic conjugate of Z_(HHR2:342)-Cys with auristatin E derivate,where the affibody used is capable of binding to the human epidermal growth factor receptor 2(HER2).Such a nanodrug not only increased the blood circulation time,but also enhanced the tumor targeting capacity(abundant affibody arms on the nanoagent surface) and the drug accumulation in tumor.As a result,this affibody-based nanoagent showed excellent antitumor activity in vivo to HER2-positive ovary and breast tumor models,which nearly eradicated both small solid tumors(about 100 mm^(3)) and large established tumors(exceed 500 mm^(3)).The relative tumor proliferation inhibition ratio reaches 99.8% for both models.展开更多
Light confinement induced by spontaneous near-surface resonance is inherently determined by the location and geometry of metallic nanostructures(NSs),offering a facile and effective approach to break through the limit...Light confinement induced by spontaneous near-surface resonance is inherently determined by the location and geometry of metallic nanostructures(NSs),offering a facile and effective approach to break through the limitation of the light-mater interaction within the photoactive layers.Here,we demonstrate high-performance Al NS/ZnO quantum dots(Al/ZnO) heterostructure UV photodetectors with controllable morphologies of the self-assembled Al NSs.The Al/ZnO heterostructures exhibit a superior light utilization than the ZnO/Al heterostructures,and a strong morphological dependence of the Al NSs on the optical properties of the heterostructures.The inter-diffusion of Al atoms into ZnO matrixes is of a great benefit for the carrier transportation.Consequently,the optimal photocurrent of the Al/ZnO heterostructure photodetectors is significantly increased by 275 times to ~1.065 mA compared to that of the pristine ZnO device,and an outstanding photoresponsivity of 11.98 A W-1 is correspondingly achieved under 6.9 MW cm-2 UV light illumination at 10 V bias.In addition,a relatively fast response is similarly witnessed with the Al/ZnO devices,paving a path to fabricate the high-performance UV photodetectors for applications.展开更多
In this paper, core–shell quantum dots(QDs) with two polar surface functional groups(ZnSe/ZnS–COOH QDs and ZnSe/ZnS–NH_2 QDs) are synthesized in an aqueous phase. Photoluminescence(PL) and absorption spectra clearl...In this paper, core–shell quantum dots(QDs) with two polar surface functional groups(ZnSe/ZnS–COOH QDs and ZnSe/ZnS–NH_2 QDs) are synthesized in an aqueous phase. Photoluminescence(PL) and absorption spectra clearly indicate luminescence down-shifting(LDS) properties. On the basis of QDs, surface functional group multilayer LDS films(MLDSs) are fabricated through an electrostatic layer-by-layer(LBL) self-assembly method. The PL intensity increases linearly with the number of bilayers, showing a regular and uniform film growth. When the M-LDS is placed on the surface of a Si-based solar cell as an optical conversion layer for the first time, the external quantum efficiency(EQE) and shortcircuit current density(Jsc) notably increases for the LDS process. The EQE response improves in a wavelength region extending from the UV region to the blue region, and its maximum increase reaches more than 15% between 350 nm and 460 nm.展开更多
Electronic, elastic and piezoelectric properties of two-dimensional （2D） group-IV buckled monolayers （GeSi, SnSi and SnGe） are studied by first principle calculations. According to our calculations, SnSi and SnGe ...Electronic, elastic and piezoelectric properties of two-dimensional （2D） group-IV buckled monolayers （GeSi, SnSi and SnGe） are studied by first principle calculations. According to our calculations, SnSi and SnGe are good 2D piezoelectric materials with large piezoelectric coefficients. The values of d11d11 of SnSi and SnGe are 5.04pm/V and 5.42pm/V, respectively, which are much larger than 2D MoS2 （3.6pm/V） and are comparable with some frequently used bulk materials （e.g., wurtzite AlN 5.1pm/V）. Charge transfer is calculated by the L wdin analysis and we find that the piezoelectric coefficients （d11d11 and d31） are highly dependent on the polarizabilities of the anions and cations in group-IV monolayers.展开更多
Self-assembled molecules(SAMs) have shown great potential in replacing bulk charge selective contact layers in high-performance perovskite solar cells(PSCs) due to their low material consumption and simple processing....Self-assembled molecules(SAMs) have shown great potential in replacing bulk charge selective contact layers in high-performance perovskite solar cells(PSCs) due to their low material consumption and simple processing. Herein, we design and synthesize a series of donor-acceptor(D-A) type SAMs(MPA-BTCA, MPA-BT-BA, and MPA-BT-RA, where MPA is 4-methoxy-N-(4-methoxyphenyl)-N-phenylaniline;BT is benzo[c][1,2,5]-thiadiazole;CA is 2-cyanoacrylic acid, BA is benzoic acid, RA is rhodanine-3-propionic acid) with distinct anchoring groups, which show dramatically different properties. MPA-BTCA with CA anchoring groups exhibited stronger dipole moments and formed a homogeneous monolayer on the indium tin oxide(ITO) surface by adopting an upstanding self-assembling mode. However, the MPA-BT-RA molecules tend to aggregate severely in solid state due to the sp~3 hybridization of the carbon atom on the RA group, which is not favorable for achieving a long-range ordered self-assembled layer.Consequently, benefiting from high dipole moment, as well as dense and uniform self-assembled film,the device based on MPA-BT-CA yielded a remarkable power conversion efficiency(PCE) of 21.81%.Encouragingly, an impressive PCE approaching 20% can still be obtained for the MPA-BT-CA-based PSCs as the device area is increased to 0.80 cm^(2). Our work sheds light on the design principles for developing hole selecting SAMs, which will pave a way for realizing highly efficient, flexible, and large-area PSCs.展开更多
By three-dimensional kinetic Monte Carlo simulations, the effects of the temperature, the flux rate, the total coverage and the interruption time on the distribution and the number of self-assembled InAs/GaAs （001） ...By three-dimensional kinetic Monte Carlo simulations, the effects of the temperature, the flux rate, the total coverage and the interruption time on the distribution and the number of self-assembled InAs/GaAs （001） quantum dot （QD） islands are studied, which shows that a higher temperature, a lower flux rate and a longer growth time correspond to a better island distribution. The relations between the number of islands and the temperature and the flux rate are also successfully simulated. It is observed that for the total coverage lower than 0.5 ML, the number of islands decreases with the temperature increasing and other growth parameters fixed and the number of islands increases with the flux rate increasing when the deposition is lower than 0.6 ML and the other parameters are fixed.展开更多
基金Project supported by the National Natural Science Foundation of China (Grants No. 12075201)the Science and Technology Planning Project of Jiangsu Province, China (Grant No. BK20201428)+1 种基金the Postgraduate Research & Practice Innovation Program of Jiangsu Province, China (Grant No. KYCX21 3193)the Special Program for Applied Research on Supercomputation of the NSFC–Guangdong Joint Fund (the second phase)。
文摘The hydroxyl-terminated self-assembled monolayer(OH-SAM),as a surface resistant to protein adsorption,exhibits substantial potential in applications such as ship navigation and medical implants,and the appropriate strategies for designing anti-fouling surfaces are crucial.Here,we employ molecular dynamics simulations and alchemical free energy calculations to systematically analyze the factors influencing resistance to protein adsorption on the SAMs terminated with single or double OH groups at three packing densities(∑=2.0 nm^(-2),4.5 nm^(-2),and 6.5 nm^(-2)),respectively.For the first time,we observed that the compactness and order of interfacial water enhance its physical barrier effect,subsequently enhancing the resistance of SAM to protein adsorption.Notably,the spatial hindrance effect of SAM leads to the embedding of protein into SAM,resulting in a lack of resistance of SAM towards protein.Furthermore,the number of hydroxyl groups per unit area of double OH-terminated SAM at ∑=6.5 nm^(-2) is approximately 2 to 3 times that of single OH-terminated SAM at ∑=6.5 nm^(-2) and 4.5 nm^(-2),consequently yielding a weaker resistance of double OH-terminated SAM towards protein.Meanwhile,due to the structure of SAM itself,i.e.,the formation of a nearly perfect ice-like hydrogen bond structure,the SAM exhibits the weakest resistance towards protein.This study will complement and improve the mechanism of OH-SAM resistance to protein adsorption,especially the traditional barrier effect of interfacial water.
文摘The well controllable selective growth of carbon nanotubes (CNTs)on the desired area is an important issue for their future applications. In this study, a novel method for selective growth of CNTs was proposed by using the technology of self-assembly monolayers (SAMs) and the Fe-assisted CNTs growth. The Si wafers with the a : Si/Si3N4 layer patterns were first prepared by low pressure chemical vapor deposition (LPCVD)and lithography techniques to act as the substrates for selective deposition of SAMs. The selectivity of SAMs from APTMS solution (N-(2-aminoethyl)-3-aminopropyltrimethoxsilane) is based on its greater reactivity of head group on a-Si than Si3N4 films. The areas of pattern with SAMs will first chelate the Fe3+ ions by their diamine-terminated group. The Fe3+ ions were then consolidated to become Fe-hydroxides in sodium boron hydride solution to form the Fe-hydroxides pattern. Finally, the Fe-hydroxides pattern was pretreated in H plasma to become a well-distributed Fe nano-particles on the surface, and followed by CNTs deposition using Fe as catalyst in a microwave plasma-chemical vapor deposition (MP-CVD) system to become the CNTs pattern. The products in each processing step, including microstructures and lattice images of CNTs, were characterized by contact angle measurements, scanning electron microscopy (SEM), XPS, Auger spectroscopy, transmission electron microscopy (TEM) and high resolution TEM (HRTEM)deposition. The results show that the main process parameters include the surface activation process and its atmosphere, consolidation time and temperature, H plasma pretreatment. The function of each processing step will be discussed.
基金supported by the National Natural Science Foundation of China(Grant Nos.62321166653,22090044,and 12350410372).Calculations were performed in part at the high-performance computing center of Jilin University.
文摘Inverted perovskite solar cells have gained prominence in industrial advancement due to their easy fabrication,low hysteresis effects,and high stability.Despite these advantages,their efficiency is currently limited by excessive defects and poor carrier transport at the perovskite-electrode interface,particularly at the buried interface between the perovskite and transparent conductive oxide(TCO).Recent efforts in the perovskite community have focused on designing novel self-assembled molecules(SAMs)to improve the quality of the buried interface.However,a notable gap remains in understanding the regulation of atomic-scale interfacial properties of SAMs between the perovskite and TCO interfaces.This understanding is crucial,particularly in terms of identifying chemically active anchoring groups.In this study,we used the star SAM([2-(9H-carbazol-9-yl)ethyl]phosphonic acid)as the base structure to investigate the defect passivation effects of eight common anchoring groups at the perovskite-TCO interface.Our findings indicate that the phosphonic and boric acid groups exhibit notable advantages.These groups fulfill three key criteria:they provide the greatest potential for defect passivation,exhibit stable adsorption with defects,and exert significant regulatory effects on interface dipoles.Ionized anchoring groups exhibit enhanced passivation capabilities for defect energy levels due to their superior Lewis base properties,which effectively neutralize local charges near defects.Among various defect types,iodine vacancies are the easiest to passivate,whereas iodine-substituted lead defects are the most challenging to passivate.Our study provides comprehensive theoretical insights and inspiration for the design of anchoring groups in SAMs,contributing to the ongoing development of more efficient inverted perovskite solar cells.
基金support and funding from the National Natural Science Foundation of China (No.52174047)Sinopec Project (No.P21063-3)。
文摘In the application of polymer gels to profile control and water shutoff,the gelation time will directly determine whether the gel can"go further"in the formation,but the most of the methods for delaying gel gelation time are complicated or have low responsiveness.There is an urgent need for an effective method for delaying gel gelation time with intelligent response.Inspired by the slow-release effect of drug capsules,this paper uses the self-assembly effect of gas-phase hydrophobic SiO_(2) in aqueous solution as a capsule to prepare an intelligent responsive self-assembled micro-nanocapsules.The capsule slowly releases the cross-linking agent under the stimulation of external conditions such as temperature and pH value,thus delaying gel gelation time.When the pH value is 2 and the concentration of gas-phase hydrophobic SiO_(2) particles is 10%,the gelation time of the capsule gel system at 30,60,90,and 120℃is12.5,13.2,15.2,and 21.1 times longer than that of the gel system without containing capsule,respectively.Compared with other methods,the yield stress of the gel without containing capsules was 78 Pa,and the yield stress after the addition of capsules was 322 Pa.The intelligent responsive self-assembled micronanocapsules prepared by gas-phase hydrophobic silica nanoparticles can not only delay the gel gelation time,but also increase the gel strength.The slow release of cross-linking agent from capsule provides an effective method for prolongating the gelation time of polymer gels.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61377065 and 61574064)the Science and Technology Planning Project of Guangdong Province,China(Grant Nos.2013CB040402009 and 2015B010132009)the Science and Technology Project of Guangzhou City,China(Grant No.2014J4100056)
文摘The morphology of the copper iodide （CuI） film as an inorganic p-type material has an important influence on enhancing the performance of polymer solar cells （PSCs）. A self-assembled monolayer of 3-aminopropanoic acid （C3-SAM） was used on the surface of indium tin oxide （ITO） before depositing the CuI films. Consequently, a well-distributed and smooth CuI film was formed with pinhole free and complete surface coverage. The root mean square of the corresponding CuI film was reduced from 3.63 nm for ITO/CuI to 0.77 nm. As a result, the average power conversion efficiency （PCE） of PSCs with the device structure of ITO/C3-SAM/CuI/P3HT：PC61BM/ZnO/Al increased significantly from 2.55% （best 2.66%） to 3.04% （best 3.20%） after C3-SAM treatment. This work provides an effective strategy to control the morphology of CuI films through interracial modification and promotes its application in efficient PSCs.
文摘Forming a monolayer of mixed nickel and gold nanoparticles through self-assembly via simple solution processing constitutes an important step toward inexpensive nanoparticle-based carbon nanofiber growth.In this work,mixed gold and nickel nanoparticles were anchored on the silicon wafer using self-assembled monolayers(SAMs)as a template.SAMs of 3-mercaptopropyl trimethoxysilane(MPTS-SAMs)were formed on silicon wafer,with the exposed thiol functionality providing ligand exchange sites to form the mixed monolayer of nickel and gold nanoparticles via a two-step sequential soaking approach.The densities of the nickel and gold nanoparticles on the surface can be varied by adjusting the soaking sequence.
基金Project supported by the National Natural Science Foundation of China （Grant No 10334060） and The State Key Development Program for Basic Research of China （Grant No 2005CB623602）.
文摘Arrays of noble metal nanoparticles show potential applications in （bio-）sensing, optical storage, surface-enhanced spectroscopy, and waveguides. For all such potential devices, controlling the size, morphology, and interparticle spacing of the nanoparticles is very important. Here, we combine seed-mediated growth with nanosphere lithography to study the controllable growth of gold nanoparticles （Au NPs）, in which the self-assembly monolayer of polystyrene （PS） on a silicon surface is used to guide the modification of allaunesilanes and the subsequent adsorption of gold seeds; seed-mediated growth is applied to controlling the morphology and size of Au NPs. The size of adsorption region （determining the number of adsorbed gold seeds） is controlled by etching PS microspheres with oxygen plasma or annealing PS microspheres at the glass transition temperature. The size and morphology of the Au NPs are controlled by changing growth conditions. In such a way, we have achieved the dual control of the obtained Au NPs. Preliminary results show that this strategy holds a great promise. This approach can also be extended to a wide range of materials and substrates.
基金Supported by the Japan Society for the Promotion of Science under Grant No JP25107004
文摘This work details a study based on HfS_(2 )transistors utilizing an n-octadecylphosphonic acid-based self-assembled monolayer(SAM)as the gate dielectric.The fabrication of the SAM-based two-dimensional(2D)material transistor is simple and can be used to improve the quality of the interface of air-sensitive 2D materials.In comparison to HfS_(2) transistors utilizing a conventional Al_2O_(3) gate insulator by atomic layer deposition,HfS_(2) transistors utilizing an SAM as the gate dielectric can reduce the operation region from 4 V to 2 V,enhance the field-effect mobility from 0.03 cm^2/Vs to 0.75 cm^2/Vs,improve the sub-threshold swing from 404 m V/dec to 156 m V/dec,and optimize the hysteresis to 0.03 V,thus demonstrating improved quality of the semiconductor/insulator interface.
基金a Chinese Ministry of Education "Changjiang" Innovative Research Team Program(IRT1169)"the Fundamental Research Funds for the Central Universities" (303-47110117,303-47110118,2012-yb-04,and 2012-Ia-008)+4 种基金NCET(NCET-11-0688)RFDP(20110143120006)NSFHB(2011CDB429)NFSC(51101115)Innovative Research Funds of SKLWUT(2011-la-024,2012-Ia-008,2011-PY-2,2011-PY-3)
文摘Monolayer chemically converted graphene （CCG） nanosheets can be homogeneously self-assembled onto silicon wafer modified by 3-aminopr- opyl triethoxysilane （APTES） to form very thin graphene film. The CCG film was characterized by FT-IR, XRD, SEM, TEM and AFM. Results show that CCG sheets formed monolayer film after assembled onto silicon wafer and there is a very tight chemical bond between sheets and wafer. Furthermore, the electrical measurements revealed that the monolayer graphene film has an excellent electrical conductivity.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.21264016,11464047,and 21364016)the National Basic Research Program of China(Grant No.2012CB821500)the Natural Science Foundation of Xinjiang Uygur Autonomous Region,China(Grant No.2013211A053)
文摘In this paper, we use a molecular theory to study the anomalous switching of ssDNA monolayers. Here, both ssDNA- water and water-water hydrogen bonds and their explicit coupling to the ssDNA conformations are considered. We find that hydrogen bonding becomes a key element in inducing the anomalous switching of ssDNA monolayers. This finding accords well with the experimental observations. Based on our theoretical model, we predict that the anomalous switching induced by water vapor will be applicable to a wide range of hydrogen bonds polymers, and ssDNA-water hydrogen bonds and water-water hydrogen bonds hybridization will lead to the hydrogen-bond network formation of 3D ssDNA monolayers.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61564002 and 11664005)the Guizhou Normal University Innovation and Entrepreneurship Education Research Center Foundation(Grant No.0418010)the Joint Foundation of Guizhou Normal University(Grant No.7341)
文摘Using first-principle calculations, we investigate the mechanical, structural, and electronic properties and formation energy of 25 kinds of Ⅲ–V binary monolayers in detail. A relative radius of the binary compound according to the atomic number in the periodic table is defined, and based on the definition, the 25 kinds of Ⅲ–V binary compounds are exactly located at a symmetric position in a symmetric matrix. The mechanical properties and band gaps are found to be very dependent on relative radius, while the effective mass of holes and electrons are found to be less dependent. A linear function between Young’s modulus and formation energy is fitted with a linear relation in this paper. The change regularity of physical properties of B–V(V = P, As, Sb, Bi) and Ⅲ–N(Ⅲ = Al, Ga, In, Tl) are found to be very different from those of other Ⅲ–V binary compounds.
基金supported by the National Nature Science Foundation of China(U1707603,21878008,21625101,U1507102,21922801)the Beijing Natural Science Foundation(2182047,2202036)the Fundamental Research Funds for the Central Universities(XK1802-6,XK1902,12060093063,2312018RC07)。
文摘The scaled-up synthesis of organic-free monolayer nanomaterials is highly desirable,especially in obtaining green energy by electrocatalysis.In this study,a method for the scaled-up synthesis of the series of monolayer layered double hydroxides(LDHs)without the addition of organic solvents is reported via the separate nucleation and aging steps process.The resulting monolayer LDHs with the thicknesses of less than 1 nm showed a narrow thickness distribution.X-ray absorption fine-structure revealed that monolayer NiFe-LDH nanosheets have a number of oxygen and metal vacancies defects.As a practical application,monolayer NiFe-LDH nanosheets containing defects showed an enhanced electrocatalytic water oxidation activity compared with that of bulk NiFe-LDH.Density functional theory calculations uncovered that excellent catalytic activity is attributed to vacancies defects.The proposed method is an economical and universally applicable strategy for the scaled-up production of monolayer LDHs.
基金Project supported by the National Key Basic Research Program of China(Grant No.2013CB933903)the National Natural Science Foundation of China(Grant Nos.20974065+2 种基金51173117and 50830107)the Scientific Research Start-up Fund of Kunming University of Science and Technology(Grant No.KKSY201305089)
文摘Recent progress of the preparation and applications of superparamagnetic iron oxide（SPIO） clusters as magnetic resonance imaging（MRI） probes is reviewed with regard to their applications in labeling and tracking cells in vivo, in diagnosis of cardiovascular diseases and tumors, and in drug delivery systems. Magnetic nanoparticles（NPs）, especially SPIO nanoparticles, have long been used as MRI contrast agents and as an advantageous nanoplatform for drug delivery,taking advantage of their unique magnetic properties and ability to function at the molecular and cellular levels. Due to advances in nanotechnology, various means to control SPIO NPs＇ size, composition, magnetization and relaxivity have been developed, as well as ways to usefully modify their surface. Recently, self-assembly of SPIO NP clusters in particulate carriers — such as polymeric micelles, vesicles, liposomes, and layer-by-layer（Lb L） capsules — have been widely studied for application as ultrasensitive MRI probes, owing to their remarkably high spin–spin（T2） relaxivity and convenience for further functionalization.
基金Supported by the National Key R&D Programme of China(Grant Nos.2017YFA0303400 and 2016YFE0110000)the National Natural Science Foundation of China(Grant Nos.11574303 and 11504366)+1 种基金the Youth Innovation Promotion Association of Chinese Academy of Sciences(Grant No.2018148)the Strategic Priority Research Program of Chinese Academy of Sciences(Grant No.XDB28000000)。
文摘We study theoretically the exciton Bose–Einstein condensation and exciton vortices in a two-dimensional(2 D)perovskite(PEA)2 Pb I4 monolayer.Combining the first-principles calculations and the Keldysh model,the exciton binding energy of in a(PEA)2 Pb I4 monolayer can approach hundreds of me V,which make it possible to observe the excitonic effect at room temperature.Due to the large exciton binding energy,and hence the high density of excitons,we find that the critical temperature of the exciton condensation could approach the liquid nitrogen regime.In the presence of perpendicular electric fields,the dipole-dipole interaction between excitons is found to drive the condensed excitons confined in(PEA)2 Pb I4 monolayer flakes into patterned vortices,as the evolution time of vortex patterns is comparable to the exciton lifetime.
基金Research and Development Plan of China(No.2016YFA0201500,2020YFA0907702)National Facility for Translational Medi-cine(Shanghai)(No.TMST-2020-001)for financial support.
文摘Affibody molecules are small nonimmunoglobulin affinity proteins,which can precisely target to some cancer cells with specific overexpressed molecular signatures.However,the relatively short in vivo half-life of them seriously limited their application in drug targeted delivery for cancer therapy.Here an amphiphilic affibody-drug conjugate is self-assembled into nanomicelles to prolong circulation time for targeted cancer therapy.As an example of the concept,the nanoagent was prepared through molecular self-assembly of the amphiphilic conjugate of Z_(HHR2:342)-Cys with auristatin E derivate,where the affibody used is capable of binding to the human epidermal growth factor receptor 2(HER2).Such a nanodrug not only increased the blood circulation time,but also enhanced the tumor targeting capacity(abundant affibody arms on the nanoagent surface) and the drug accumulation in tumor.As a result,this affibody-based nanoagent showed excellent antitumor activity in vivo to HER2-positive ovary and breast tumor models,which nearly eradicated both small solid tumors(about 100 mm^(3)) and large established tumors(exceed 500 mm^(3)).The relative tumor proliferation inhibition ratio reaches 99.8% for both models.
基金the National Natural Science Foundation of China(Grant Nos.61705070 and 61974052)China Postdoctoral Science Foundation(Grant Nos.2019M662594)National Research Foundation of Korea(NRF)Grant funded by the Korean Government(MSIP)(Nos.NRF2019R1A2C4069438 and NRF2018R1A6A1A03025242)。
文摘Light confinement induced by spontaneous near-surface resonance is inherently determined by the location and geometry of metallic nanostructures(NSs),offering a facile and effective approach to break through the limitation of the light-mater interaction within the photoactive layers.Here,we demonstrate high-performance Al NS/ZnO quantum dots(Al/ZnO) heterostructure UV photodetectors with controllable morphologies of the self-assembled Al NSs.The Al/ZnO heterostructures exhibit a superior light utilization than the ZnO/Al heterostructures,and a strong morphological dependence of the Al NSs on the optical properties of the heterostructures.The inter-diffusion of Al atoms into ZnO matrixes is of a great benefit for the carrier transportation.Consequently,the optimal photocurrent of the Al/ZnO heterostructure photodetectors is significantly increased by 275 times to ~1.065 mA compared to that of the pristine ZnO device,and an outstanding photoresponsivity of 11.98 A W-1 is correspondingly achieved under 6.9 MW cm-2 UV light illumination at 10 V bias.In addition,a relatively fast response is similarly witnessed with the Al/ZnO devices,paving a path to fabricate the high-performance UV photodetectors for applications.
基金Project supported by the Natural Science Foundation of Shandong Province,China(Grant No.ZR2017PF011)the National Natural Science Foundation of China(Grant No.E020701)the Doctoral Scientific Research Foundation of Binzhou University,China(Grant No.2014Y10)
文摘In this paper, core–shell quantum dots(QDs) with two polar surface functional groups(ZnSe/ZnS–COOH QDs and ZnSe/ZnS–NH_2 QDs) are synthesized in an aqueous phase. Photoluminescence(PL) and absorption spectra clearly indicate luminescence down-shifting(LDS) properties. On the basis of QDs, surface functional group multilayer LDS films(MLDSs) are fabricated through an electrostatic layer-by-layer(LBL) self-assembly method. The PL intensity increases linearly with the number of bilayers, showing a regular and uniform film growth. When the M-LDS is placed on the surface of a Si-based solar cell as an optical conversion layer for the first time, the external quantum efficiency(EQE) and shortcircuit current density(Jsc) notably increases for the LDS process. The EQE response improves in a wavelength region extending from the UV region to the blue region, and its maximum increase reaches more than 15% between 350 nm and 460 nm.
基金Supported by the National Natural Science Foundation of China under Grant No 51672208the National Science and Technology Pillar Program during the Twelfth Five-Year Plan Period under Grant No 2012BAD47B02+2 种基金the Sci-Tech Research and Development Program of Shaanxi Province under Grant Nos 2010K01-120,2011JM6010 and 2015JM5183the Shaanxi Provincial Department of Education under Grant No 2013JK0927the SRF for ROCS of SEM
文摘Electronic, elastic and piezoelectric properties of two-dimensional （2D） group-IV buckled monolayers （GeSi, SnSi and SnGe） are studied by first principle calculations. According to our calculations, SnSi and SnGe are good 2D piezoelectric materials with large piezoelectric coefficients. The values of d11d11 of SnSi and SnGe are 5.04pm/V and 5.42pm/V, respectively, which are much larger than 2D MoS2 （3.6pm/V） and are comparable with some frequently used bulk materials （e.g., wurtzite AlN 5.1pm/V）. Charge transfer is calculated by the L wdin analysis and we find that the piezoelectric coefficients （d11d11 and d31） are highly dependent on the polarizabilities of the anions and cations in group-IV monolayers.
基金financial support from the National Natural Science Foundation of China (NSFC)(21805128)the National Natural Science Foundation of China (21774055)+3 种基金the financial support from the National Natural Science Foundation of China(21975260)the Shenzhen Science and Technology Innovation Commission(JCYJ20180504165709042)financial support of Guangdong Provincial Key Laboratory Program(2021B1212040001) from the Department of Science and Technology of Guangdong Provincethe NSFC-CNR exchange program of NSFC(22011530391)。
文摘Self-assembled molecules(SAMs) have shown great potential in replacing bulk charge selective contact layers in high-performance perovskite solar cells(PSCs) due to their low material consumption and simple processing. Herein, we design and synthesize a series of donor-acceptor(D-A) type SAMs(MPA-BTCA, MPA-BT-BA, and MPA-BT-RA, where MPA is 4-methoxy-N-(4-methoxyphenyl)-N-phenylaniline;BT is benzo[c][1,2,5]-thiadiazole;CA is 2-cyanoacrylic acid, BA is benzoic acid, RA is rhodanine-3-propionic acid) with distinct anchoring groups, which show dramatically different properties. MPA-BTCA with CA anchoring groups exhibited stronger dipole moments and formed a homogeneous monolayer on the indium tin oxide(ITO) surface by adopting an upstanding self-assembling mode. However, the MPA-BT-RA molecules tend to aggregate severely in solid state due to the sp~3 hybridization of the carbon atom on the RA group, which is not favorable for achieving a long-range ordered self-assembled layer.Consequently, benefiting from high dipole moment, as well as dense and uniform self-assembled film,the device based on MPA-BT-CA yielded a remarkable power conversion efficiency(PCE) of 21.81%.Encouragingly, an impressive PCE approaching 20% can still be obtained for the MPA-BT-CA-based PSCs as the device area is increased to 0.80 cm^(2). Our work sheds light on the design principles for developing hole selecting SAMs, which will pave a way for realizing highly efficient, flexible, and large-area PSCs.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.60908028,60971068,and 10979065)the Fundamental Research Funds for the Central Universities,China(Grant No.2011RC0402)the Program for New Century Excellent Talents in University,China(Grant No.NCET-10-0261)
文摘By three-dimensional kinetic Monte Carlo simulations, the effects of the temperature, the flux rate, the total coverage and the interruption time on the distribution and the number of self-assembled InAs/GaAs （001） quantum dot （QD） islands are studied, which shows that a higher temperature, a lower flux rate and a longer growth time correspond to a better island distribution. The relations between the number of islands and the temperature and the flux rate are also successfully simulated. It is observed that for the total coverage lower than 0.5 ML, the number of islands decreases with the temperature increasing and other growth parameters fixed and the number of islands increases with the flux rate increasing when the deposition is lower than 0.6 ML and the other parameters are fixed.
