A notable portion of cachelines in real-world workloads exhibits inner non-uniform access behaviors.However,modern cache management rarely considers this fine-grained feature,which impacts the effective cache capacity...A notable portion of cachelines in real-world workloads exhibits inner non-uniform access behaviors.However,modern cache management rarely considers this fine-grained feature,which impacts the effective cache capacity of contemporary high-performance spacecraft processors.To harness these non-uniform access behaviors,an efficient cache replacement framework featuring an auxiliary cache specifically designed to retain evicted hot data was proposed.This framework reconstructs the cache replacement policy,facilitating data migration between the main cache and the auxiliary cache.Unlike traditional cacheline-granularity policies,the approach excels at identifying and evicting infrequently used data,thereby optimizing cache utilization.The evaluation shows impressive performance improvement,especially on workloads with irregular access patterns.Benefiting from fine granularity,the proposal achieves superior storage efficiency compared with commonly used cache management schemes,providing a potential optimization opportunity for modern resource-constrained processors,such as spacecraft processors.Furthermore,the framework complements existing modern cache replacement policies and can be seamlessly integrated with minimal modifications,enhancing their overall efficacy.展开更多
The Tyrannosauridae,which is characterized by specialized pachydont dentition and putative bone-cracking predatory strategies,is one of the most extensively studied theropod lineages.Although tooth replacement pattern...The Tyrannosauridae,which is characterized by specialized pachydont dentition and putative bone-cracking predatory strategies,is one of the most extensively studied theropod lineages.Although tooth replacement patterns,crucial for understanding feeding behaviors,have been thoroughly studied in this group,studies on non-tyrannosaurid tyrannosauroids are relatively scarce.This study utilizes high-resolution CT data to investigate the tooth replacement pattern in two specimens of Guanlong wucaii,a Late Jurassic tyrannosauroid,and provides insights into the evolution of tooth replacement across Tyrannosauroidea.Second-generation replacement teeth,a rarity observed mainly in giant predatory theropods(e.g.some tyrannosaurids),were detected in the dentary dentition of the juvenile Guanlong.Zahnreihen reconstructions display a consistent cephalad alternating tooth replacement pattern in the maxilla and the dentary of both of the examined individuals,with Z-spacing values exceeding 2.0.As Guanlong grows,the Z-spacing value in the maxillary dentition increases,resembling the ontogenetic changes documented in the Tyrannosauridae.Additionally,like Tarbosaurus,Guanlong also displays a discontinuity between the tooth replacement waves at the premaxilla-maxilla boundary.This study thus demonstrates that some tyrannosaurid-like tooth replacement patterns were acquired before the origin of the Tyrannosauridae.展开更多
The reliability of the product sold under a warranty is usually maintained by the manufacturer during the warranty period. After the expiry of the warranty, however, the consumer confronts a problem about how to maint...The reliability of the product sold under a warranty is usually maintained by the manufacturer during the warranty period. After the expiry of the warranty, however, the consumer confronts a problem about how to maintain the reliability of the product. This paper proposes, from the consumer's perspective, a replacement policy after the extended warranty, under the assumption that the product is sold under the renewable free replacement warranty (RFRW) policy in which the replacement is dependent on the repair-cost threshold. The proposed replacement policy is the replacement after the extended warranty is performed by the consumer based on the repair-cost threshold or preventive replacement (PR) age, which are decision variables. The expected cost rate model is derived from the consumer's perspective. The existence and uniqueness of the optimal solution that minimizes the expected cost rate per unit time are offered. Finally, a numerical example is presented to exemplify the proposed model.展开更多
This paper develops a new replacement policy for a system with multiple spare units.An optimal replacement period is determined by maximizing the mean time to failure of the system.We show that there exists a finite a...This paper develops a new replacement policy for a system with multiple spare units.An optimal replacement period is determined by maximizing the mean time to failure of the system.We show that there exists a finite and unique optimal replacement period T for units with strictly increasing failure rates. We also proof that the optimal repIacement period for a system with spares is decreasing in k. Furthermore, an algorithm is presented to get the optimal replacement period and a numerical example is given to illustrate the result. with strictly展开更多
Background Dental implants have been widely used in the last few decades.However,patients with insufficient bone height need reconstructive surgeries before implant insertion.Distraction implant(Dl)has been invented t...Background Dental implants have been widely used in the last few decades.However,patients with insufficient bone height need reconstructive surgeries before implant insertion.Distraction implant(Dl)has been invented to simplify the treatment procedure,but the shortcomings of Dl have limited its clinical use.We introduced biodegradable polyester to a novel Dl,called biodegradable interference distraction implant(BIDI).The purpose of this study was to assess the radiological,histological,and biomechanical properties of BIDI in animal models.Methods BIDIs were manufactured and inserted into the atrophied mandibles of 6 dogs.展开更多
Objective Cardiopulmonary exercise testing(CPET)is helpful to identify right ventriclar(RV)dysfunction in patients with rapair of Tetralogy of Fallot(rTOF),but its predictive value on early outcomes of pulmonary valve...Objective Cardiopulmonary exercise testing(CPET)is helpful to identify right ventriclar(RV)dysfunction in patients with rapair of Tetralogy of Fallot(rTOF),but its predictive value on early outcomes of pulmonary valve replacement(PVR)of these patients is unclear when similar preoperative ventricular size and function in cardiovascular magnetic resonance(CMR)exist.The aim of this study is to evaluate whether CPET is useful to predict the early outcomes of rTOF patients after PVR.展开更多
Component reallocation(CR)is receiving increasing attention in many engineering systems with functionally interchangeable and unbalanced degradation components.This paper studies a CR and system replacement maintenanc...Component reallocation(CR)is receiving increasing attention in many engineering systems with functionally interchangeable and unbalanced degradation components.This paper studies a CR and system replacement maintenance policy of series repairable systems,which undergoes minimal repairs for each emergency failure of components,and considers constant downtime and cost of minimal repair,CR and system replacement.Two binary mixed integer nonlinear programming models are respectively established to determine the assignment of CR,and the uptime right before CR and system replacement with the objective of minimizing the system average maintenance cost and maximizing the system availability.Further,we derive the optimal uptime right before system replacement with maximization of the system availability,and then give the relationship between the system availability and the component failure rate.Finally,numerical examples show that the CR and system replacement maintenance policy can effectively reduce the system average maintenance cost and improve the system availability,and further give the sensitivity analysis and insights of the CR and system replacement maintenance policy.展开更多
Establishing Consensus with Users of Research Irradiator Devices to Facilitate Source Type Replacement Danette R.Fennesy1,Janet M.Gutiérrez1,2,Scott J.Patlovich1,Robert J.Emery1(1.The University of Texas Health S...Establishing Consensus with Users of Research Irradiator Devices to Facilitate Source Type Replacement Danette R.Fennesy1,Janet M.Gutiérrez1,2,Scott J.Patlovich1,Robert J.Emery1(1.The University of Texas Health Science Center at Houston,Environmental Health&Safety,6431 Fannin St,CYF G.102,Houston,TX,77030;2.Corresponding author)Abstract:The ability to irradiate cells,tissues,and other biological materials with high-energy photons has been an essential tool in the discovery of numerous biomedical research advancements.展开更多
Traditional stabilization of backfilling material is done by using Portland cement. However, the high price of cement forced mining engineer s to seek cheaper binding materials. Fly ash, which is the indus- trial wast...Traditional stabilization of backfilling material is done by using Portland cement. However, the high price of cement forced mining engineer s to seek cheaper binding materials. Fly ash, which is the indus- trial wast e from thermal power plant, possess the potential activity of jellification, and can b e used in cemented fill as a partial substitute for cement to reduce the fill co s t. Tests were done during the past few years in Xinqiao Pyrite Mine and Phoenix Copper Mine to determine the technology parameters and the suitable content of f ly ash. Specimens with different cement/fly/ash tailings (sands) ratios were tes ted to obtain the strength values of the fill mass based on the analyses of both the chemical composition and physical and mechanical properties of fly ash . The compressive strength of specimens with a ratio of 1∶2∶8 (cement to fly ash to tailings ) can reach 2 MPa after 90 d curing, totally meeting the requiremen t of artificial pillar and reducing the fill cost by 20%-30%.展开更多
Remote monitoring of tools for prediction of tool wear in cutting processes was considered, and a method of implementation of a remote-monitoring system previously developed was proposed. Sensor signals were received ...Remote monitoring of tools for prediction of tool wear in cutting processes was considered, and a method of implementation of a remote-monitoring system previously developed was proposed. Sensor signals were received and tool wear was predicted in the local system using an ART2 algorithm, while the monitoring result was transferred to the remote system via intemet. The monitoring system was installed at an on-site machine tool for monitoring three kinds of tools cutting titanium alloys, and the tool wear was evaluated on the basis of vigilances, similarities between vibration signals received and the normal patterns previously trained. A number of experiments were carried out to evaluate the performance of the proposed system, and the results show that the wears of finishing-cut tools are successfully detected when the moving average vigilance becomes lower than the critical vigilance, thus the appropriate tool replacement time is notified before the breakage.展开更多
The purpose of this study was to develop a quantitative structure–property relationship(QSPR) model based on the enhanced replacement method(ERM) and support vector machine(SVM) to predict the blood-to-brain barrier ...The purpose of this study was to develop a quantitative structure–property relationship(QSPR) model based on the enhanced replacement method(ERM) and support vector machine(SVM) to predict the blood-to-brain barrier partitioning behavior(log BB) of various drugs and organic compounds. Different molecular descriptors were calculated using a dragon package to represent the molecular structures of the compounds studied. The enhanced replacement method(ERM) was used to select the variables and construct the SVM model. The correlation coefficient, R^2, between experimental results and predicted log BB was 0.878 and 0.986, respectively. The results obtained demonstrated that, for all compounds, the log BB values estimated by SVM agreed with the experimental data, demonstrating that SVM is an effective method for model development, and can be used as a powerful chemometric tool in QSPR studies.展开更多
A simple repairable system with one repairman is considered. As the system working age is up to a specified time T, the repairman will repair the component preventively, and it will go back to work as soon as the repa...A simple repairable system with one repairman is considered. As the system working age is up to a specified time T, the repairman will repair the component preventively, and it will go back to work as soon as the repair finished. When the system failure, the repairman repair it immediately. The time interval of the preventive repair and the failure correction is described with the extended geometric process. Different from the available replacement policy which is usually based on the failure number or the working age of the system, the bivariate policy (T,N) is considered. The explicit expression of the long-run average cost rate function C(T,N) of the system is derived. Through alternatively minimize the cost rate function C(T,N), the optimal replacement policy (T?,N?) is obtained, and it proves that the optimal policy is unique. Numerical cases illustrate the conclusion, and the sensitivity analysis of the parameters is carried out.展开更多
Degenerative diseases significantly reduce the quality of human life.Non-invasive treatments are used in the initial stages of osteoarthritis(OA).Total knee arthroplasty is used in the late stages of osteoarthritis of...Degenerative diseases significantly reduce the quality of human life.Non-invasive treatments are used in the initial stages of osteoarthritis(OA).Total knee arthroplasty is used in the late stages of osteoarthritis of the knee joint.Non-invasive methods based on mechanical action are also used for the rehabilitation of a patient after arthroplasty.This paper presents numerical models of the knee joint with degenerative OA changes and arthroplasty.Using these models,a computational study was made of the influence of the intensity of shock-wave exposure on the conditioning for the regeneration of bone and cartilage tissues.Based on the modeling results,it was found that in the knee joint with degenerative OA changes,conditions for the regeneration of cartilage and meniscus tissues were fulfilled under medium and highintensity loading.Under high-intensity loading(up to 0.9 m J/mm^(2)),the stress level was significantly below the ultimate value required for fracture.At knee arthroplasty,the conditions for bone tissue regeneration around the tibia component are fulfilled only under high-intensity loading.展开更多
Songliao Basin is a large-scale Cretaceous continental sedimentary basin in northeastern China. In the northern Songliao Basin Nenjiang Formation Unit 1 are mainly dark mudstones with dolostone interbeds.Understanding...Songliao Basin is a large-scale Cretaceous continental sedimentary basin in northeastern China. In the northern Songliao Basin Nenjiang Formation Unit 1 are mainly dark mudstones with dolostone interbeds.Understanding the sedimentary characteristics and dolomitization of the dolostones is of great significance to the paleoenvironment and paleoc-展开更多
Background Arrhythmogenic right ventricular cardiomyopathy(ARVC)is an inherited primary cardiomyopathy characterized by myocardial degeneration with fibro-fatty replacement.Clinical and genetic features of ARVC were w...Background Arrhythmogenic right ventricular cardiomyopathy(ARVC)is an inherited primary cardiomyopathy characterized by myocardial degeneration with fibro-fatty replacement.Clinical and genetic features of ARVC were well identified in Caucasian cohorts,but seldom examined in Chinese cohort.Our aim is to examine the genetic factor,genotype-phenotype correlations,and inheritance patterns of ARVC in a Chinese cohort.展开更多
The maintenance model of simple repairable system is studied.We assume that there are two types of failure,namely type Ⅰ failure(repairable failure)and type Ⅱ failure(irrepairable failure).As long as the type Ⅰ fai...The maintenance model of simple repairable system is studied.We assume that there are two types of failure,namely type Ⅰ failure(repairable failure)and type Ⅱ failure(irrepairable failure).As long as the type Ⅰ failure occurs,the system will be repaired immediately,which is failure repair(FR).Between the(n-1)th and the nth FR,the system is supposed to be preventively repaired(PR)as the consecutive working time of the system reaches λ^(n-1) T,where λ and T are specified values.Further,we assume that the system will go on working when the repair is finished and will be replaced at the occurrence of the Nth type Ⅰ failure or the occurrence of the first type Ⅱ failure,whichever occurs first.In practice,the system will degrade with the increasing number of repairs.That is,the consecutive working time of the system forms a decreasing generalized geometric process(GGP)whereas the successive repair time forms an increasing GGP.A simple bivariate policy(T,N)repairable model is introduced based on GGP.The alternative searching method is used to minimize the cost rate function C(N,T),and the optimal(T,N)^(*) is obtained.Finally,numerical cases are applied to demonstrate the reasonability of this model.展开更多
文摘A notable portion of cachelines in real-world workloads exhibits inner non-uniform access behaviors.However,modern cache management rarely considers this fine-grained feature,which impacts the effective cache capacity of contemporary high-performance spacecraft processors.To harness these non-uniform access behaviors,an efficient cache replacement framework featuring an auxiliary cache specifically designed to retain evicted hot data was proposed.This framework reconstructs the cache replacement policy,facilitating data migration between the main cache and the auxiliary cache.Unlike traditional cacheline-granularity policies,the approach excels at identifying and evicting infrequently used data,thereby optimizing cache utilization.The evaluation shows impressive performance improvement,especially on workloads with irregular access patterns.Benefiting from fine granularity,the proposal achieves superior storage efficiency compared with commonly used cache management schemes,providing a potential optimization opportunity for modern resource-constrained processors,such as spacecraft processors.Furthermore,the framework complements existing modern cache replacement policies and can be seamlessly integrated with minimal modifications,enhancing their overall efficacy.
文摘The Tyrannosauridae,which is characterized by specialized pachydont dentition and putative bone-cracking predatory strategies,is one of the most extensively studied theropod lineages.Although tooth replacement patterns,crucial for understanding feeding behaviors,have been thoroughly studied in this group,studies on non-tyrannosaurid tyrannosauroids are relatively scarce.This study utilizes high-resolution CT data to investigate the tooth replacement pattern in two specimens of Guanlong wucaii,a Late Jurassic tyrannosauroid,and provides insights into the evolution of tooth replacement across Tyrannosauroidea.Second-generation replacement teeth,a rarity observed mainly in giant predatory theropods(e.g.some tyrannosaurids),were detected in the dentary dentition of the juvenile Guanlong.Zahnreihen reconstructions display a consistent cephalad alternating tooth replacement pattern in the maxilla and the dentary of both of the examined individuals,with Z-spacing values exceeding 2.0.As Guanlong grows,the Z-spacing value in the maxillary dentition increases,resembling the ontogenetic changes documented in the Tyrannosauridae.Additionally,like Tarbosaurus,Guanlong also displays a discontinuity between the tooth replacement waves at the premaxilla-maxilla boundary.This study thus demonstrates that some tyrannosaurid-like tooth replacement patterns were acquired before the origin of the Tyrannosauridae.
基金supported by the National Natural Science Foundation of China(7147114771631001)+1 种基金the Basic Research Project of Natural Science in Shaanxi Province(2015JQ7273)the 111 Project(B13044)
文摘The reliability of the product sold under a warranty is usually maintained by the manufacturer during the warranty period. After the expiry of the warranty, however, the consumer confronts a problem about how to maintain the reliability of the product. This paper proposes, from the consumer's perspective, a replacement policy after the extended warranty, under the assumption that the product is sold under the renewable free replacement warranty (RFRW) policy in which the replacement is dependent on the repair-cost threshold. The proposed replacement policy is the replacement after the extended warranty is performed by the consumer based on the repair-cost threshold or preventive replacement (PR) age, which are decision variables. The expected cost rate model is derived from the consumer's perspective. The existence and uniqueness of the optimal solution that minimizes the expected cost rate per unit time are offered. Finally, a numerical example is presented to exemplify the proposed model.
文摘This paper develops a new replacement policy for a system with multiple spare units.An optimal replacement period is determined by maximizing the mean time to failure of the system.We show that there exists a finite and unique optimal replacement period T for units with strictly increasing failure rates. We also proof that the optimal repIacement period for a system with spares is decreasing in k. Furthermore, an algorithm is presented to get the optimal replacement period and a numerical example is given to illustrate the result. with strictly
基金supported by the National Natural Science Foundation of China(No. 30900284,No.31100668,and No.31070873)
文摘Background Dental implants have been widely used in the last few decades.However,patients with insufficient bone height need reconstructive surgeries before implant insertion.Distraction implant(Dl)has been invented to simplify the treatment procedure,but the shortcomings of Dl have limited its clinical use.We introduced biodegradable polyester to a novel Dl,called biodegradable interference distraction implant(BIDI).The purpose of this study was to assess the radiological,histological,and biomechanical properties of BIDI in animal models.Methods BIDIs were manufactured and inserted into the atrophied mandibles of 6 dogs.
文摘Objective Cardiopulmonary exercise testing(CPET)is helpful to identify right ventriclar(RV)dysfunction in patients with rapair of Tetralogy of Fallot(rTOF),but its predictive value on early outcomes of pulmonary valve replacement(PVR)of these patients is unclear when similar preoperative ventricular size and function in cardiovascular magnetic resonance(CMR)exist.The aim of this study is to evaluate whether CPET is useful to predict the early outcomes of rTOF patients after PVR.
基金supported by the National Natural Science Foundation of China(72101025,72271049)the Fundamental Research Funds for the Central Universities(FRF-TP-20-073A1)the China Postdoct oral Science Foundation(2021M690349)。
文摘Component reallocation(CR)is receiving increasing attention in many engineering systems with functionally interchangeable and unbalanced degradation components.This paper studies a CR and system replacement maintenance policy of series repairable systems,which undergoes minimal repairs for each emergency failure of components,and considers constant downtime and cost of minimal repair,CR and system replacement.Two binary mixed integer nonlinear programming models are respectively established to determine the assignment of CR,and the uptime right before CR and system replacement with the objective of minimizing the system average maintenance cost and maximizing the system availability.Further,we derive the optimal uptime right before system replacement with maximization of the system availability,and then give the relationship between the system availability and the component failure rate.Finally,numerical examples show that the CR and system replacement maintenance policy can effectively reduce the system average maintenance cost and improve the system availability,and further give the sensitivity analysis and insights of the CR and system replacement maintenance policy.
文摘Establishing Consensus with Users of Research Irradiator Devices to Facilitate Source Type Replacement Danette R.Fennesy1,Janet M.Gutiérrez1,2,Scott J.Patlovich1,Robert J.Emery1(1.The University of Texas Health Science Center at Houston,Environmental Health&Safety,6431 Fannin St,CYF G.102,Houston,TX,77030;2.Corresponding author)Abstract:The ability to irradiate cells,tissues,and other biological materials with high-energy photons has been an essential tool in the discovery of numerous biomedical research advancements.
文摘Traditional stabilization of backfilling material is done by using Portland cement. However, the high price of cement forced mining engineer s to seek cheaper binding materials. Fly ash, which is the indus- trial wast e from thermal power plant, possess the potential activity of jellification, and can b e used in cemented fill as a partial substitute for cement to reduce the fill co s t. Tests were done during the past few years in Xinqiao Pyrite Mine and Phoenix Copper Mine to determine the technology parameters and the suitable content of f ly ash. Specimens with different cement/fly/ash tailings (sands) ratios were tes ted to obtain the strength values of the fill mass based on the analyses of both the chemical composition and physical and mechanical properties of fly ash . The compressive strength of specimens with a ratio of 1∶2∶8 (cement to fly ash to tailings ) can reach 2 MPa after 90 d curing, totally meeting the requiremen t of artificial pillar and reducing the fill cost by 20%-30%.
基金supported by Changwon National University in 2009-2010
文摘Remote monitoring of tools for prediction of tool wear in cutting processes was considered, and a method of implementation of a remote-monitoring system previously developed was proposed. Sensor signals were received and tool wear was predicted in the local system using an ART2 algorithm, while the monitoring result was transferred to the remote system via intemet. The monitoring system was installed at an on-site machine tool for monitoring three kinds of tools cutting titanium alloys, and the tool wear was evaluated on the basis of vigilances, similarities between vibration signals received and the normal patterns previously trained. A number of experiments were carried out to evaluate the performance of the proposed system, and the results show that the wears of finishing-cut tools are successfully detected when the moving average vigilance becomes lower than the critical vigilance, thus the appropriate tool replacement time is notified before the breakage.
文摘The purpose of this study was to develop a quantitative structure–property relationship(QSPR) model based on the enhanced replacement method(ERM) and support vector machine(SVM) to predict the blood-to-brain barrier partitioning behavior(log BB) of various drugs and organic compounds. Different molecular descriptors were calculated using a dragon package to represent the molecular structures of the compounds studied. The enhanced replacement method(ERM) was used to select the variables and construct the SVM model. The correlation coefficient, R^2, between experimental results and predicted log BB was 0.878 and 0.986, respectively. The results obtained demonstrated that, for all compounds, the log BB values estimated by SVM agreed with the experimental data, demonstrating that SVM is an effective method for model development, and can be used as a powerful chemometric tool in QSPR studies.
基金supported by the National Natural Science Foundation of China(61573014)the Fundamental Research Funds for the Central Universities(JB180702)
文摘A simple repairable system with one repairman is considered. As the system working age is up to a specified time T, the repairman will repair the component preventively, and it will go back to work as soon as the repair finished. When the system failure, the repairman repair it immediately. The time interval of the preventive repair and the failure correction is described with the extended geometric process. Different from the available replacement policy which is usually based on the failure number or the working age of the system, the bivariate policy (T,N) is considered. The explicit expression of the long-run average cost rate function C(T,N) of the system is derived. Through alternatively minimize the cost rate function C(T,N), the optimal replacement policy (T?,N?) is obtained, and it proves that the optimal policy is unique. Numerical cases illustrate the conclusion, and the sensitivity analysis of the parameters is carried out.
基金financial support of the Russian Foundation for Basic Research,grant No.20-08-00818(simulation results)the Government research assignment for ISPMS SB RAS,project FWRW-2021-009(in-house software development)。
文摘Degenerative diseases significantly reduce the quality of human life.Non-invasive treatments are used in the initial stages of osteoarthritis(OA).Total knee arthroplasty is used in the late stages of osteoarthritis of the knee joint.Non-invasive methods based on mechanical action are also used for the rehabilitation of a patient after arthroplasty.This paper presents numerical models of the knee joint with degenerative OA changes and arthroplasty.Using these models,a computational study was made of the influence of the intensity of shock-wave exposure on the conditioning for the regeneration of bone and cartilage tissues.Based on the modeling results,it was found that in the knee joint with degenerative OA changes,conditions for the regeneration of cartilage and meniscus tissues were fulfilled under medium and highintensity loading.Under high-intensity loading(up to 0.9 m J/mm^(2)),the stress level was significantly below the ultimate value required for fracture.At knee arthroplasty,the conditions for bone tissue regeneration around the tibia component are fulfilled only under high-intensity loading.
文摘Songliao Basin is a large-scale Cretaceous continental sedimentary basin in northeastern China. In the northern Songliao Basin Nenjiang Formation Unit 1 are mainly dark mudstones with dolostone interbeds.Understanding the sedimentary characteristics and dolomitization of the dolostones is of great significance to the paleoenvironment and paleoc-
文摘Background Arrhythmogenic right ventricular cardiomyopathy(ARVC)is an inherited primary cardiomyopathy characterized by myocardial degeneration with fibro-fatty replacement.Clinical and genetic features of ARVC were well identified in Caucasian cohorts,but seldom examined in Chinese cohort.Our aim is to examine the genetic factor,genotype-phenotype correlations,and inheritance patterns of ARVC in a Chinese cohort.
基金supported by the National Natural Science Foundation of China(61573014)the Fundamental Research Funds for the Central Universities(JB180702).
文摘The maintenance model of simple repairable system is studied.We assume that there are two types of failure,namely type Ⅰ failure(repairable failure)and type Ⅱ failure(irrepairable failure).As long as the type Ⅰ failure occurs,the system will be repaired immediately,which is failure repair(FR).Between the(n-1)th and the nth FR,the system is supposed to be preventively repaired(PR)as the consecutive working time of the system reaches λ^(n-1) T,where λ and T are specified values.Further,we assume that the system will go on working when the repair is finished and will be replaced at the occurrence of the Nth type Ⅰ failure or the occurrence of the first type Ⅱ failure,whichever occurs first.In practice,the system will degrade with the increasing number of repairs.That is,the consecutive working time of the system forms a decreasing generalized geometric process(GGP)whereas the successive repair time forms an increasing GGP.A simple bivariate policy(T,N)repairable model is introduced based on GGP.The alternative searching method is used to minimize the cost rate function C(N,T),and the optimal(T,N)^(*) is obtained.Finally,numerical cases are applied to demonstrate the reasonability of this model.
