A full-wave analysis of the electromagnetic problem of a three-dimensional （3-D） antenna radiating through a 3-D dielectric radome is preserued. The problem is formulated using the Poggio-Miller-Chang-Harrington- Wu...A full-wave analysis of the electromagnetic problem of a three-dimensional （3-D） antenna radiating through a 3-D dielectric radome is preserued. The problem is formulated using the Poggio-Miller-Chang-Harrington- Wu（PMCHW） approach for homogeneous dielectric objects and the electric field integral equation for conducting objects. The integral equations are discretized by the method of moment （MoM）, in which the conducting and dielectric surface/interfaces are represented by curvilinear triangular patches and the unknown equivalent electric and magnetic currents are expanded using curvilinear RWG basis functions. The resultant matrix equation is then solved by the multilevel fast multipole algorithm （MLFMA） and fast far-field approximation （FAFFA） is used to further accelerate the computation. The radiation patterns of dipole arrays in the presence of radomes are presented. The numerical results demonstrate the accuracy and versatility of this method.展开更多
In this paper, it is offered to use the method of modulated reflection for the measurementof complex transfer factor of a radome wall on various sites of its surface. The circuit of equipmentallowed to carry out of su...In this paper, it is offered to use the method of modulated reflection for the measurementof complex transfer factor of a radome wall on various sites of its surface. The circuit of equipmentallowed to carry out of such measurement is given. The advantage of the given method in comparisonwith measurements on a gleam is shown. The results of the experimental research are given and theestimation of the accuracy of proposed method is considered.展开更多
The silica fiber reinforced silica and boron nitride-based composites （SiO2f/SiO2-BN） were prepared firstly via the sol-gel method and then the urea route, and the effects of oxidation treatment on the component, st...The silica fiber reinforced silica and boron nitride-based composites （SiO2f/SiO2-BN） were prepared firstly via the sol-gel method and then the urea route, and the effects of oxidation treatment on the component, structure, mechanical and dielectric properties of the composites were investigated. The results show that the oxidation treatment at 450 ℃ will not impair the structure of boron nitride, and carbon is the main impurity with the excessive urea. The density of SiO2f/SiO2-BN composites is 1.81 g/cm3, and the flexural strength and elastic modulus are 113.9 MPa and 36.5 GPa, respectively. After oxidation treatment, the density varies to 1.80 g/cm3, and the flexural strength and elastic modulus are decreased to 58.9 MPa and 9.4 GPa, respectively. The mechanical properties of the composites are severely damaged, but they still exhibit a good toughness. The composites show excellent dielectric properties with the dielectric constant and loss tangent being 3.22 and 0.003 9, respectively, which indicates that the oxidation treatment is ineffective to improve the dielectric properties of SiOzf/SiO2-BN composites.展开更多
The feasibility of making two antennas work within a shared aperture conformai to a platform like an aircraft or a missile is investigated. The shared aperture is enclosed by a deep cavity, which is covered by a colum...The feasibility of making two antennas work within a shared aperture conformai to a platform like an aircraft or a missile is investigated. The shared aperture is enclosed by a deep cavity, which is covered by a columniform dielectric radome. A modified quadrifilar helix antenna （QHA） with extended volute arms and a vertical monopole with a ring shaped ground are arranged in this co-aperture for global position system （GPS） orientation and telemetry, respectively. The effects of the cavity on these two antennas and the mutual coupling between these two antennas are studied through large numbers of experiments. The results show that the QHA has a strong influence on the monopole; however, these two antennas of the overall arrangement can perform simultaneously well within the aperture. The QHA has a right hand circular polarization （RHCP） and a broad beam normal to the radome topside, meanwhile the monopole can be used to produce a main lobe in the grazing direction above the aperture in some certain cases of the vertical location of the QHA in the cavity.展开更多
A tunable dual polarization absorption-transmission-absorption(A-T-A)frequency selective absorbers(FSR)to address the issue of high insertion loss in current tunable FSRs is proposed.The lumped resistors are loaded on...A tunable dual polarization absorption-transmission-absorption(A-T-A)frequency selective absorbers(FSR)to address the issue of high insertion loss in current tunable FSRs is proposed.The lumped resistors are loaded onto the lossy layer to absorb electromagnetic waves within the absorption band.The varactor diodes are loaded onto another lossless layer to control the transmission frequency band of the FSR.Its equivalent circuit model is provided.The proposed tunable FSR can change the passband within the range of 14.5~15.5 GHz by changing the bias voltage applied to the lossless transmission layer,while maintaining insertion loss above-1.67 dB.The series resonant structure of the lossy layer generates bilateral absorption bands between 10.2~13.5 GHz and 17.2~22 GHz,with broadband reflection suppression ranging from 10.3 GHz to 22 GHz(70.7%).The prototype is manufactured,and the measured results have verified the simulation results.展开更多
基金the National Natural Science Foundation of China (60431010)
文摘A full-wave analysis of the electromagnetic problem of a three-dimensional （3-D） antenna radiating through a 3-D dielectric radome is preserued. The problem is formulated using the Poggio-Miller-Chang-Harrington- Wu（PMCHW） approach for homogeneous dielectric objects and the electric field integral equation for conducting objects. The integral equations are discretized by the method of moment （MoM）, in which the conducting and dielectric surface/interfaces are represented by curvilinear triangular patches and the unknown equivalent electric and magnetic currents are expanded using curvilinear RWG basis functions. The resultant matrix equation is then solved by the multilevel fast multipole algorithm （MLFMA） and fast far-field approximation （FAFFA） is used to further accelerate the computation. The radiation patterns of dipole arrays in the presence of radomes are presented. The numerical results demonstrate the accuracy and versatility of this method.
文摘In this paper, it is offered to use the method of modulated reflection for the measurementof complex transfer factor of a radome wall on various sites of its surface. The circuit of equipmentallowed to carry out of such measurement is given. The advantage of the given method in comparisonwith measurements on a gleam is shown. The results of the experimental research are given and theestimation of the accuracy of proposed method is considered.
基金Projects(50902150,90916019) supported by the National Natural Science Foundation of ChinaProject (9140C8203040905) supported by the State Key Laboratory Foundation of ChinaProject(S100103) supported by the Graduate Innovation Foundation of National University of Defense Technology,China
文摘The silica fiber reinforced silica and boron nitride-based composites （SiO2f/SiO2-BN） were prepared firstly via the sol-gel method and then the urea route, and the effects of oxidation treatment on the component, structure, mechanical and dielectric properties of the composites were investigated. The results show that the oxidation treatment at 450 ℃ will not impair the structure of boron nitride, and carbon is the main impurity with the excessive urea. The density of SiO2f/SiO2-BN composites is 1.81 g/cm3, and the flexural strength and elastic modulus are 113.9 MPa and 36.5 GPa, respectively. After oxidation treatment, the density varies to 1.80 g/cm3, and the flexural strength and elastic modulus are decreased to 58.9 MPa and 9.4 GPa, respectively. The mechanical properties of the composites are severely damaged, but they still exhibit a good toughness. The composites show excellent dielectric properties with the dielectric constant and loss tangent being 3.22 and 0.003 9, respectively, which indicates that the oxidation treatment is ineffective to improve the dielectric properties of SiOzf/SiO2-BN composites.
文摘The feasibility of making two antennas work within a shared aperture conformai to a platform like an aircraft or a missile is investigated. The shared aperture is enclosed by a deep cavity, which is covered by a columniform dielectric radome. A modified quadrifilar helix antenna （QHA） with extended volute arms and a vertical monopole with a ring shaped ground are arranged in this co-aperture for global position system （GPS） orientation and telemetry, respectively. The effects of the cavity on these two antennas and the mutual coupling between these two antennas are studied through large numbers of experiments. The results show that the QHA has a strong influence on the monopole; however, these two antennas of the overall arrangement can perform simultaneously well within the aperture. The QHA has a right hand circular polarization （RHCP） and a broad beam normal to the radome topside, meanwhile the monopole can be used to produce a main lobe in the grazing direction above the aperture in some certain cases of the vertical location of the QHA in the cavity.
文摘A tunable dual polarization absorption-transmission-absorption(A-T-A)frequency selective absorbers(FSR)to address the issue of high insertion loss in current tunable FSRs is proposed.The lumped resistors are loaded onto the lossy layer to absorb electromagnetic waves within the absorption band.The varactor diodes are loaded onto another lossless layer to control the transmission frequency band of the FSR.Its equivalent circuit model is provided.The proposed tunable FSR can change the passband within the range of 14.5~15.5 GHz by changing the bias voltage applied to the lossless transmission layer,while maintaining insertion loss above-1.67 dB.The series resonant structure of the lossy layer generates bilateral absorption bands between 10.2~13.5 GHz and 17.2~22 GHz,with broadband reflection suppression ranging from 10.3 GHz to 22 GHz(70.7%).The prototype is manufactured,and the measured results have verified the simulation results.
