The phenomenon of a target echo peak overlapping with the backscattered echo peak significantly undermines the detection range and precision of underwater laser fuzes.To overcome this issue,we propose a four-quadrant ...The phenomenon of a target echo peak overlapping with the backscattered echo peak significantly undermines the detection range and precision of underwater laser fuzes.To overcome this issue,we propose a four-quadrant dual-beam circumferential scanning laser fuze to distinguish various interference signals and provide more real-time data for the backscatter filtering algorithm.This enhances the algorithm loading capability of the fuze.In order to address the problem of insufficient filtering capacity in existing linear backscatter filtering algorithms,we develop a nonlinear backscattering adaptive filter based on the spline adaptive filter least mean square(SAF-LMS)algorithm.We also designed an algorithm pause module to retain the original trend of the target echo peak,improving the time discrimination accuracy and anti-interference capability of the fuze.Finally,experiments are conducted with varying signal-to-noise ratios of the original underwater target echo signals.The experimental results show that the average signal-to-noise ratio before and after filtering can be improved by more than31 d B,with an increase of up to 76%in extreme detection distance.展开更多
For a large-scale adaptive array, the heavy computational load and the high-rate data transmission are two challenges in the implementation of an adaptive digital beamforming system. An efficient parallel digital beam...For a large-scale adaptive array, the heavy computational load and the high-rate data transmission are two challenges in the implementation of an adaptive digital beamforming system. An efficient parallel digital beamforming （DBF） algorithm based on the least mean square algorithm （PLMS） is proposed. An appropriate method is found to partition the least mean square （LMS） algorithm into a number of operational modules, which can be easily executed in a distributed-parallel-processing fashion. As a result, the proposed PLMS algorithm provides an effective solution that can alleviate the bottleneck of high-rate data transmission and reduce the computational cost. PLMS requires less computational load than that of the conventional parallel algorithms based on the recursive least square （RLS） algorithm, as well as it is easier to be implemented to do real time adaptive array processing. Moreover, low sidelobe of the beam pattern is obtained by constraining the static steering vector with Tschebyscheff coefficients. Finally, a scheme of the PLMS algorithm using distributed-parallel-processing system is also proposed. The simulation results demonstrate that the PLMS algorithm has the same interference cancellation performance as that of the conventional LMS algorithm. Moreover, the PLMS algorithm can obtain the same good beamforming performance, regardless how the algorithm is partitioned. It is expected that the proposed algorithm will be used in a large-scale adaptive array system to deal with real time adaptive digital beamforming processing.展开更多
为降低电磁干扰对信号传输的影响,分析了应答器上行链路信号传输过程及其易遭受干扰信号的特点,设计了基于符号最小均方误差(least mean square,LMS)算法的自适应解调方法。为在硬件平台中实现该解调方法,通过仿真计算,确定LMS算法的自...为降低电磁干扰对信号传输的影响,分析了应答器上行链路信号传输过程及其易遭受干扰信号的特点,设计了基于符号最小均方误差(least mean square,LMS)算法的自适应解调方法。为在硬件平台中实现该解调方法,通过仿真计算,确定LMS算法的自适应算法中间变量变化范围,使用截位操作完成权值系数的更新,设置均衡器长度、步长因子、中值滤波系数分别为1、1/64、16,可在不占用过多硬件资源情况下获得良好的解调性能。解调算法在现场可编程门阵列(field programmable gata array,FPGA)上予以验证,实验表明,当信噪比为6 dB时,FPGA中自适应解调误码率为0.000001,在信噪比大于等于6 dB时,实测误码率与仿真分析误码率基本一致;FPGA自适应解调方法在列车不同速度等级下误码率均小于10^(-6)。展开更多
为了改进现有的变步长最小均方误差(least mean square,LMS)算法在低信噪比时性能较差的缺陷,提出了一种基于改进的双曲正切函数的变步长LMS算法,从理论分析和仿真实验两方面讨论了引入参数对算法收敛性、跟踪性、稳定性的影响及算法的...为了改进现有的变步长最小均方误差(least mean square,LMS)算法在低信噪比时性能较差的缺陷,提出了一种基于改进的双曲正切函数的变步长LMS算法,从理论分析和仿真实验两方面讨论了引入参数对算法收敛性、跟踪性、稳定性的影响及算法的抗干扰性。理论分析和仿真实验表明该算法在高低信噪比时均具有较快的收敛速度和跟踪速度以及较小的稳态误差和稳态失调,并且在低信噪比时该算法的收敛性、跟踪性、稳态性均优于其他多种变步长算法。展开更多
在有源电力滤波器(Active Power Filter,APF)的低信噪比(Signal Noise Ratio,SNR)环境下,为了提高变步长最小均方(Least Mean Square,LMS)自适应算法对谐波电流检测的跟踪速度及精度,提出改进的变步长LMS算法。该算法在MVSS-LMS算法的...在有源电力滤波器(Active Power Filter,APF)的低信噪比(Signal Noise Ratio,SNR)环境下,为了提高变步长最小均方(Least Mean Square,LMS)自适应算法对谐波电流检测的跟踪速度及精度,提出改进的变步长LMS算法。该算法在MVSS-LMS算法的基础上,增加历史误差的遗忘加权和估计并控制步长更新,动态控制步长更新范围,采用滑动窗遗忘加权减小了计算复杂度。同时,对改进算法性能进行稳定性分析。实验结果表明,该算法不仅具有较快的动态响应速度,而且在APF的低信噪比情况下,稳态误差有所减小,具有较高的抗干扰能力,谐波电流检测效果较好。展开更多
针对热工对象的时变性特点及其在运行过程中易受到不确定性干扰的影响,提出一种基于最小均方(least mean square,LMS)自适应滤波器的热工过程建模方法。LMS滤波器以未知对象的输入和输出作为激励和期望信号,通过最速下降法得到未知对象...针对热工对象的时变性特点及其在运行过程中易受到不确定性干扰的影响,提出一种基于最小均方(least mean square,LMS)自适应滤波器的热工过程建模方法。LMS滤波器以未知对象的输入和输出作为激励和期望信号,通过最速下降法得到未知对象的有限脉冲响应(finity impluse response,FIR)模型,其与差分方程或传递函数是等价的。实验仿真和某电厂实际运行数据验证了该算法的有效性。这种建模方法避免了复杂的机理分析,其抽头权值的分布可以表征热工对象的动态特性,为分析热工对象提供了一种手段。展开更多
基金supported by the 2021 Open Project Fund of Science and Technology on Electromechanical Dynamic Control Laboratory,grant number 212-C-J-F-QT-2022-0020China Postdoctoral Science Foundation,grant number 2021M701713+1 种基金Postgraduate Research&Practice Innovation Program of Jiangsu Province,grant number KYCX23_0511the Jiangsu Funding Program for Excellent Postdoctoral Talent,grant number 20220ZB245。
文摘The phenomenon of a target echo peak overlapping with the backscattered echo peak significantly undermines the detection range and precision of underwater laser fuzes.To overcome this issue,we propose a four-quadrant dual-beam circumferential scanning laser fuze to distinguish various interference signals and provide more real-time data for the backscatter filtering algorithm.This enhances the algorithm loading capability of the fuze.In order to address the problem of insufficient filtering capacity in existing linear backscatter filtering algorithms,we develop a nonlinear backscattering adaptive filter based on the spline adaptive filter least mean square(SAF-LMS)algorithm.We also designed an algorithm pause module to retain the original trend of the target echo peak,improving the time discrimination accuracy and anti-interference capability of the fuze.Finally,experiments are conducted with varying signal-to-noise ratios of the original underwater target echo signals.The experimental results show that the average signal-to-noise ratio before and after filtering can be improved by more than31 d B,with an increase of up to 76%in extreme detection distance.
文摘For a large-scale adaptive array, the heavy computational load and the high-rate data transmission are two challenges in the implementation of an adaptive digital beamforming system. An efficient parallel digital beamforming （DBF） algorithm based on the least mean square algorithm （PLMS） is proposed. An appropriate method is found to partition the least mean square （LMS） algorithm into a number of operational modules, which can be easily executed in a distributed-parallel-processing fashion. As a result, the proposed PLMS algorithm provides an effective solution that can alleviate the bottleneck of high-rate data transmission and reduce the computational cost. PLMS requires less computational load than that of the conventional parallel algorithms based on the recursive least square （RLS） algorithm, as well as it is easier to be implemented to do real time adaptive array processing. Moreover, low sidelobe of the beam pattern is obtained by constraining the static steering vector with Tschebyscheff coefficients. Finally, a scheme of the PLMS algorithm using distributed-parallel-processing system is also proposed. The simulation results demonstrate that the PLMS algorithm has the same interference cancellation performance as that of the conventional LMS algorithm. Moreover, the PLMS algorithm can obtain the same good beamforming performance, regardless how the algorithm is partitioned. It is expected that the proposed algorithm will be used in a large-scale adaptive array system to deal with real time adaptive digital beamforming processing.
文摘为了改进现有的变步长最小均方误差(least mean square,LMS)算法在低信噪比时性能较差的缺陷,提出了一种基于改进的双曲正切函数的变步长LMS算法,从理论分析和仿真实验两方面讨论了引入参数对算法收敛性、跟踪性、稳定性的影响及算法的抗干扰性。理论分析和仿真实验表明该算法在高低信噪比时均具有较快的收敛速度和跟踪速度以及较小的稳态误差和稳态失调,并且在低信噪比时该算法的收敛性、跟踪性、稳态性均优于其他多种变步长算法。
文摘在有源电力滤波器(Active Power Filter,APF)的低信噪比(Signal Noise Ratio,SNR)环境下,为了提高变步长最小均方(Least Mean Square,LMS)自适应算法对谐波电流检测的跟踪速度及精度,提出改进的变步长LMS算法。该算法在MVSS-LMS算法的基础上,增加历史误差的遗忘加权和估计并控制步长更新,动态控制步长更新范围,采用滑动窗遗忘加权减小了计算复杂度。同时,对改进算法性能进行稳定性分析。实验结果表明,该算法不仅具有较快的动态响应速度,而且在APF的低信噪比情况下,稳态误差有所减小,具有较高的抗干扰能力,谐波电流检测效果较好。
文摘针对热工对象的时变性特点及其在运行过程中易受到不确定性干扰的影响,提出一种基于最小均方(least mean square,LMS)自适应滤波器的热工过程建模方法。LMS滤波器以未知对象的输入和输出作为激励和期望信号,通过最速下降法得到未知对象的有限脉冲响应(finity impluse response,FIR)模型,其与差分方程或传递函数是等价的。实验仿真和某电厂实际运行数据验证了该算法的有效性。这种建模方法避免了复杂的机理分析,其抽头权值的分布可以表征热工对象的动态特性,为分析热工对象提供了一种手段。
