The effect of acid component including various conventional acids and tungstic compounds on glucose hydrogenation over a series of binary catalyst system containing Ru/C catalyst was investigated. The results showed t...The effect of acid component including various conventional acids and tungstic compounds on glucose hydrogenation over a series of binary catalyst system containing Ru/C catalyst was investigated. The results showed that HC1, H2SO4, H3BO3, H3PO4, and HNO3 had negligible effect, while all the tungstic compounds imposed inhibiting effects on the hydrogenation of glucose over Ru/C catalyst, and the suppressing effect followed the order of H2WO4〉HPW〉WO3〉AMT〉HSiW. This order is the same as the order of ethylene glycol （EG） yields in the one-pot conversion of glucose to EG, suggesting the important role of competition between glucose hydrogenation and retro-aldol condensation in controlling the selectivity of EG.展开更多
Alloying degree, particle size and the level of dispersion are the key structural parameters of Pt-Ru/C catalyst in fuel cells. Solvent（s） used in the preparation process can affect the particle size and alloying de...Alloying degree, particle size and the level of dispersion are the key structural parameters of Pt-Ru/C catalyst in fuel cells. Solvent（s） used in the preparation process can affect the particle size and alloying degree of the object substance, which lead to a great positive impact on its properties. In this work, three types of solvents and their mixtures were used in preparation of the Pt-Ru/C catalysts by chemical reduction of metal precursors with sodium borohydride at room temperature. The structure of the catalysts was characterized by X-ray diffraction （XRD） and Transmission electron microscopy （TEM）. The catalytic activity and stability for methanol electro-oxidation were studied by Cyclic Voltammetry （CV） and Chronoamperometry （CA）. Pt-Ru/C catalyst prepared in H2O or binary solvents of H2O and isopropanol had large particle size and low alloying degree leading to low catalytic activity and less stability in methanol electro-oxidation. When tetrahydrofuran was added to the above solvent systems, Pt-Ru/C catalyst prepared had smaller particle size and higher alloying degree which resulted in better catalytic activity, lower onset and peak potentials, compared with the above catalysts. Moreover, the catalyst prepared in ternary solvents of isopropanol, water and tetrahydrofuran had the smallest particle size, and the high alloying degree and the dispersion kept unchanged. Therefore, this kind of catalyst showed the highest catalytic activity and good stability for methanol electro-oxidation.展开更多
Green and economical CO_(2)utilization is significant for CO_(2)emission reduction and energy development.Here,the 1D Mo_(2)C nanowires with dominant(101)crystal surfaces were modified by the deposition of atomic func...Green and economical CO_(2)utilization is significant for CO_(2)emission reduction and energy development.Here,the 1D Mo_(2)C nanowires with dominant(101)crystal surfaces were modified by the deposition of atomic functional components Rh and K.While unmodifiedβMo_(2)C could only convert CO_(2)to methanol,the designed catalyst of K_(0.2)Rh_(0.2)/β-Mo_(2)C exhibited up to 72.1%of ethanol selectivity at 150℃.It was observed that the atomically dispersed Rh could form the bifunctional active centres with the active carrierβMo_(2)C with the synergistic effects to achieve highly specific controlled C–C coupling.By promoting the CO_(2)adsorption and activation,the introduction of an alkali metal(K)mainly regulated the balanced performance of the two active centres,which in turn improved the hydrogenation selectivity.Overall,the controlled modification ofβMo_(2)C provides a new design strategy for the highly efficient,lowtemperature hydrogenation of CO_(2)to ethanol with single-atom catalysts,which provides an excellent example for the rational design of the complex catalysts.展开更多
Catalyst support is extremely important for future fuel cell devices.In this work,we developed doubleshelled C/TiO2(DSCT)hollow spheres as an excellent catalyst support via a template-directed method.The combination o...Catalyst support is extremely important for future fuel cell devices.In this work,we developed doubleshelled C/TiO2(DSCT)hollow spheres as an excellent catalyst support via a template-directed method.The combination of hollow structure,TiO2 shell and carbon layer results in excellent electron conductivity,electrocatalytic activity,and chemical stability.These uniformed DSCT hollow spheres are used as catalyst support to synthesize Pt/DSCT hollow spheres electrocatalyst.The resulting Pt/DSCT hollow spheres exhibited high catalytic performance with a current density of 462 mA mg^-1 for methanol oxidation reaction,which is 2.52 times higher than that of the commercial Pt/C.Furthermore,the increased tolerance to carbonaceous poisoning with a higher If/Ibratio and a better long-term stability in acid media suggests that the DSCT hollow sphere is a promising C/TiO2-based catalyst support for direct methanol fuel cells applications.展开更多
The Fischer–Tropsch to olefins（FTO） process is a method for the direct conversion of synthesis gas to lower C–Colefins. Carbon-supported iron carbide nanoparticles are attractive catalysts for this reaction.The ca...The Fischer–Tropsch to olefins（FTO） process is a method for the direct conversion of synthesis gas to lower C–Colefins. Carbon-supported iron carbide nanoparticles are attractive catalysts for this reaction.The catalytic activity can be improved and undesired formation of alkanes can be suppressed by the addition of sodium and sulfur as promoters but the influence of their content and ratio remains poorly understood and the promoted catalysts often suffer from rapid deactivation due to particle growth. A series of carbon black-supported iron catalysts with similar iron content and nominal sodium/sulfur loadings of 1–30/0.5–5 wt% with respect to iron are prepared and characterized under FTO conditions at 1and 10 bar syngas pressure to illuminate the influence of the promoter level on the catalytic properties.Iron particles and promoters undergo significant reorganization during FTO operation under industrially relevant conditions. Low sodium content（1–3 wt%） leads to a delay in iron carbide formation. Sodium contents of 15–30 wt% lead to rapid loss of catalytic activity due to the covering of the iron surface with promoters during particle growth under FTO operation. Higher activity and slower loss of activity are observed at low promoter contents（1–3 wt% sodium and 0.5–1 wt% sulfur） but a minimum amount of alkali is required to effectively suppress methane and C–Cparaffin formation. A reference catalyst support（carbide-derived carbon aerogel） shows that the optimum promoter level depends on iron particle size and support pore structure.展开更多
The performance of lignin depolymerization is basically determined by the interunit C–O and C–C bonds.Numerous C–O bond cleavage strategies have been developed, while the cleavage of C–C bond between the primary a...The performance of lignin depolymerization is basically determined by the interunit C–O and C–C bonds.Numerous C–O bond cleavage strategies have been developed, while the cleavage of C–C bond between the primary aromatic units remains a challenging task due to the high dissociation energy of C–C bond.Herein, a multifunctional Ru Re alloy catalyst was designed, which exhibited exceptional catalytic activity for the cleavage of both C–O and C–C linkages in a broad range of lignin model compounds(β-1, a-5, 5–5,β-O-4, 4-O-5) and two stubborn lignins(kraft lignin and alkaline lignin), affording 97.5% overall yield of monocyclic compounds from model compounds and up to 129% of the maximum theoretical yield of monocyclic products based on C–O bonds cleavage from realistic lignin. Scanning transmission electron microscopy(STEM) characterization showed that Ru Re(1:1) alloy particles with hexagonal close-packed structure were homogeneously dispersed on the support. Quasi-in situ X-ray photoelectron spectroscopy(XPS), and X-ray absorption spectroscopy(XAS) indicate that Ru species were predominantly metallic state, whereas Re species were partially oxidized;meanwhile, there was a strong interaction between Ru and Re, where the electron transfer from Re to Ru was occurred, resulting in great improvement on the capability of C–O and C–C bonds cleavage in lignin conversion.展开更多
Atomically dispersed iron-nitrogen-carbon(Fe-N-C) catalysts have emerged as the most promising alternative to the expensive Pt-based catalysts for the oxygen reduction reaction(ORR) in proton exchange membrane fuel ce...Atomically dispersed iron-nitrogen-carbon(Fe-N-C) catalysts have emerged as the most promising alternative to the expensive Pt-based catalysts for the oxygen reduction reaction(ORR) in proton exchange membrane fuel cells(PEMFCs),however suffer from low site density of active Fe-N4 moiety and limited mass transport during the catalytic reaction.To address these challenges,we report a three-dimensional(3D) metal-organic frameworks(MOF)-derived Fe-N-C single-atom catalyst.In this well-designed Fe-N-C catalyst,the micro-scale interconnected skeleton,the nano-scale ordered pores and the atomic-scale abundant carbon edge defects inside the skeleton significantly enhance the site density of active Fe-N4 moiety,thus improving the Fe utilization in the final catalyst.Moreover,the combination of the above mentioned micro-and nano-scale structures greatly facilitates the mass transport in the 3D Fe-N-C catalyst.Therefore,the multiscale engineered Fe-N-C single-atom catalyst achieves excellent ORR performance under acidic condition and affords a significantly enhanced current density and power density in PEMFC.Our findings may open new opportunities for the rational design of FeN-C catalysts through multiscale structural engineering.展开更多
The catalyst screening tests for carbon dioxide oxidative coupling of methane (CO2-OCM) have been investigated over ternary and binary metal oxide catalysts. The catalysts are prepared by doping MgO- and CeO2-based so...The catalyst screening tests for carbon dioxide oxidative coupling of methane (CO2-OCM) have been investigated over ternary and binary metal oxide catalysts. The catalysts are prepared by doping MgO- and CeO2-based solids with oxides from alkali (Li2O), alkaline earth (CaO), and transition metal groups (WO3 or MnO). The presence of the peroxide (O2-2) active sites on the Li2O2, revealed by Raman spectroscopy, may be the key factor in the enhanced performance of some of the Li2O/MgO catalysts. The high reducibility of the CeO2 catalyst, an important factor in the CO2-OCM catalyst activity, may be enhanced by the presence of manganese oxide species. The manganese oxide species increases oxygen mobility and oxygen vacancies in the CeO2 catalyst. Raman and Fourier Transform Infra Red (FT-IR) spectroscopies revealed the presence of lattice vibrations of metal-oxygen bondings and active sites in which the peaks corresponding to the bulk crystalline structures of Li2O, CaO, WO3 and MnO are detected. The performance of 5%MnO/15%CaO/CeO2 catalyst is the most potential among the CeO2-based catalysts, although lower than the 2%Li2O/MgO catalyst. The 2%Li2O/MgO catalyst showed the most promising C2+ hydrocarbons selectivity and yield at 98.0% and 5.7%, respectively.展开更多
The results of commercial application of two types of C_8 aromatics isomerization catalysts under different feed conditions were compared to gain an insight in the techno-economical basis for selecting proper technolo...The results of commercial application of two types of C_8 aromatics isomerization catalysts under different feed conditions were compared to gain an insight in the techno-economical basis for selecting proper technological route at the plant.The comparison reveals differences in every aspect of feed consumption,unit capacity,product output,product distribution,and unit process parameters depending upon which catalyst type is adopted by the integrated PX complex.The type of aromatics isomerization catalyst has its influence on the plant scale,the construction cost,the process unit capacity and the product cost,with the magnitude of its impact varying with changing feed conditions.展开更多
Carbonate-modified metal-support interfaces allow Ru/MnCO_(3) catalyst to exhibit over 99% selectivity,great specific activity and long-term anti-CO poisoning stability in atmospheric CO_(2) methanation.As a contrast,...Carbonate-modified metal-support interfaces allow Ru/MnCO_(3) catalyst to exhibit over 99% selectivity,great specific activity and long-term anti-CO poisoning stability in atmospheric CO_(2) methanation.As a contrast,Ru/MnO catalyst with metal-oxide interfaces prefers reverse water-gas shift rather than methanation route,along with a remarkably lower activity and a less than 15% CH_(4) selectivity.The carbonatemodified interfaces are found to stabilize the Ru species and activate CO_(2) and H_(2) molecules.Ru-CO^(4) species are identified as the reaction intermediates steadily formed from CO_(2) dissociation,which show moderate adsorption strength and high reactivity in further hydrogenation to CH_(4),Furthermore,carbonates of Ru/MnCO_(3) are found to be consumed by hydrogenation to form CH_(4) and replenished by exchange with CO_(2),which are in a dynamic equilibrium during the reaction.Modification with surface carbonates is proved as an efficient strategy to endow metal-support interfaces of Ru-based catalysts with unique catalytic functions for selective CO_(2) hydrogenation.展开更多
A series of Pt/C catalysts for proton exchange membrane fuel cells(PEMFCs) with various metal loadings is synthesized by a microwave-assisted polyol process via mixing an extremely stable platinum colloid(> 3 month...A series of Pt/C catalysts for proton exchange membrane fuel cells(PEMFCs) with various metal loadings is synthesized by a microwave-assisted polyol process via mixing an extremely stable platinum colloid(> 3 months’ shelf life) from single batch preparation with activated carbon ethylene glycol suspension.21 wt%, 42 wt% and 61 wt% Pt loadings are employed to showcase the advantages of the improved polyol process. The ultraviolet(UV)–visible spectra and ζ-potential measurements are conducted to monitor the wet chemistry process during catalyst preparation. The powder X-ray diffraction(XRD), transmission electron microscopy(TEM) and thermogravimetric analysis(TGA) characterizations are carried out on catalysts. The catalyst activities are investigated using electrochemical and single cell tests. The stability of Pt nanoparticle colloid is explored by ORR, cyclic voltammetry(CV) and ζ-potential measurements. The TEM results show the Pt particle sizes of the colloid, and the sizes of the 21 wt%, 42 wt% and 61 wt%Pt/C samples are 2.1–3.9 nm. Because of the high Pt dispersion, the Pt/C catalysts exhibit superior electroactivity toward ORR. In addition, four 61 wt% Pt/C catalysts made from the Pt colloid with 0–3 months’ shelf life show almost the same performance, which exhibits superior stability of the Pt colloid system without surfactant protection.展开更多
The activity of Mo_(2) C-based catalyst on vegetable oil conversion into biofuel could be greatedly promoted by tuning the carbon content,while its modification mechanism on the surface properties remained elusive.Her...The activity of Mo_(2) C-based catalyst on vegetable oil conversion into biofuel could be greatedly promoted by tuning the carbon content,while its modification mechanism on the surface properties remained elusive.Herein,the exposed active sites,the particle size and Lewis acid amount of Ni-Mo_(2) C/MCM-41 catalysts were regulated by varying CH_(4) content in carbonization gas.The activity of Ni-Mo_(2) C/MCM-41 catalysts in jatropha oil(JO)conversion showed a volcano-like trend over the catalysts with increasing CH_(4) content from 15%to 50%in the preparation process.The one prepared by 25%CH_(4) content(NiMo_(2) C(25)/MCM-41)exhibited the outstanding catalytic performance with 83.9 wt%biofuel yield and95.2%C_(15)-C_(18) selectivity.Such a variation of activity was ascribed to the most exposed active sites,the smallest particle size,and the lowest Lewis acid amount from Ni^(0) on the Ni-Mo_(2) C(25)/MCM-41 catalyst surface.Moreover,the Ni-Mo_(2) C(25)/MCM-41 catalyst could also effectively catalyze the conversion of crude waste cooking oil(WCO)into green diesel.This study offers an effective strategy to improve catalytic performance of molybdenum carbide catalyst on vegetable oil conversion.展开更多
Catalytic hydrogenation of CO_(2) using renewable hydrogen not only reduces greenhouse gas emissions,but also provides industrial chemicals.Herein,a Co-Fe bimetallic catalyst was developed by a facile reactive ball-mi...Catalytic hydrogenation of CO_(2) using renewable hydrogen not only reduces greenhouse gas emissions,but also provides industrial chemicals.Herein,a Co-Fe bimetallic catalyst was developed by a facile reactive ball-milling method for highly active and selective hydrogenation of CO_(2) to value-added hydrocarbons.When reacted at 320℃,1.0 MPa and 9600 mL h^(-1) g_(cat)^(-1),the selectivity to light olefin(C_(2)^(=)-C_(4)^(=)) and C_(5)+ species achieves 57.3% and 22.3%,respectively,at a CO_(2) co nversion of 31.4%,which is superior to previous Fe-based catalysts.The CO_(2) activation can be promoted by the CoFe phase formed by reactive ball milling of the Fe-Co_(3)O_(4) mixture,and the in-situ Co_(2)C and Fe_(5)C_(2) formed during hydrogenation are beneficial for the C-C coupling reaction.The initial C-C coupling is related to the combination of CO species with the surface carbon of Fe/Co carbides,and the sustained C-C coupling is maintained by self-recovery of defective carbides.This new strategy contributes to the development of efficient catalysts for the hydrogenation of CO_(2) to value-added hydrocarbons.展开更多
Proton exchange membrane fuel cells(PEMFC)have attracted much attention because of their high energy conversion efficiency,high power density and zero emission of pollutants.However,the high cost of the cathode platin...Proton exchange membrane fuel cells(PEMFC)have attracted much attention because of their high energy conversion efficiency,high power density and zero emission of pollutants.However,the high cost of the cathode platinum group metal(PGM)catalysts creates a barrier for the large-scale application of PEMFC.Tremendous efforts have been devoted to the development of low-cost PGM-free catalysts,especially the Fe-N-C catalysts,to replace the expensive PGM catalysts.However,the characterization methods and evaluation standards of the catalysts varies,which is not conducive to the comparison of PGM-free catalysts.U.S.Department of energy(DOE)is the only authority that specifies the testing standards and activity targets for PGM-free catalysts.In this review,the major breakthroughs of Fe-N-C catalysts are outlined with the reference of DOE standards and targets.The preparation and characteristics of these highly active Fe-N-C catalysts are briefly introduced.Moreover,the efforts on improving the mass transfer and the durability issue of Fe-N-C fuel cell are discussed.Finally,the prospective directions concerning the comprehensive evaluation of the Fe-N-C catalysts are proposed.展开更多
In this work,the influence of CO2 on the structural variation and catalytic performance of Na2WO4/Mn/Si O2 for oxidative coupling of methane to ethylene was investigated. The catalyst was prepared by impregnation meth...In this work,the influence of CO2 on the structural variation and catalytic performance of Na2WO4/Mn/Si O2 for oxidative coupling of methane to ethylene was investigated. The catalyst was prepared by impregnation method and characterized by XRD,Raman and XPS techniques. Appropriate amount of CO2 in the reactant gases enhanced the formation of surface tetrahedral Na2WO4 species and promoted the migration of O in MOx,Na,W from the catalyst bulk to surface,which were favorable for oxidative coupling of methane. When the molar ratio of CH4/O2/CO2 was 3/1/2,enriched surface tetrahedral Na2WO4 species and high surface concentration of O in MOx,Na,W were detected,and then high CH4 conversion of 33.1% and high C2H4 selectivity of 56.2% were obtained. With further increase of CO2 in the reagent gases,the content of active surface tetrahedral Na2WO4 species and surface concentration of O in MOx,Na,W decreased,while that of inactive species（Mn WO4 and Mn2O3） increased dramatically,leading to low CH4 conversion and low C2H4 selectivity. It could be speculated that Na2WO4 crystal was transformed into Mn WO4 crystal with excessive CO2 added under the reaction conditions. Pretreatment of Na2WO4/Mn/Si O2 catalyst by moderate amount of CO2 before OCM also promoted the formation of Na2WO4 species.展开更多
基金supported by the National Natural Science Foundation of China(Grants 21176235 and 21206159)
文摘The effect of acid component including various conventional acids and tungstic compounds on glucose hydrogenation over a series of binary catalyst system containing Ru/C catalyst was investigated. The results showed that HC1, H2SO4, H3BO3, H3PO4, and HNO3 had negligible effect, while all the tungstic compounds imposed inhibiting effects on the hydrogenation of glucose over Ru/C catalyst, and the suppressing effect followed the order of H2WO4〉HPW〉WO3〉AMT〉HSiW. This order is the same as the order of ethylene glycol （EG） yields in the one-pot conversion of glucose to EG, suggesting the important role of competition between glucose hydrogenation and retro-aldol condensation in controlling the selectivity of EG.
基金supported by 863 Project(No.2006AA05Z102)the Cultivation Fund of the Key Scientific and Technical Innovation Project,Ministry of Education of China (No.707050)+1 种基金Specialized Research Fund for the Doctoral Program of Higher Education (No.20060610023)Chengdu Natural Science Foundation (Nos.06GGYB449GX-030,and 07GGZD139GX)
文摘Alloying degree, particle size and the level of dispersion are the key structural parameters of Pt-Ru/C catalyst in fuel cells. Solvent（s） used in the preparation process can affect the particle size and alloying degree of the object substance, which lead to a great positive impact on its properties. In this work, three types of solvents and their mixtures were used in preparation of the Pt-Ru/C catalysts by chemical reduction of metal precursors with sodium borohydride at room temperature. The structure of the catalysts was characterized by X-ray diffraction （XRD） and Transmission electron microscopy （TEM）. The catalytic activity and stability for methanol electro-oxidation were studied by Cyclic Voltammetry （CV） and Chronoamperometry （CA）. Pt-Ru/C catalyst prepared in H2O or binary solvents of H2O and isopropanol had large particle size and low alloying degree leading to low catalytic activity and less stability in methanol electro-oxidation. When tetrahydrofuran was added to the above solvent systems, Pt-Ru/C catalyst prepared had smaller particle size and higher alloying degree which resulted in better catalytic activity, lower onset and peak potentials, compared with the above catalysts. Moreover, the catalyst prepared in ternary solvents of isopropanol, water and tetrahydrofuran had the smallest particle size, and the high alloying degree and the dispersion kept unchanged. Therefore, this kind of catalyst showed the highest catalytic activity and good stability for methanol electro-oxidation.
基金financially supported by the National Natural Science Foundation of China(21925803,U19A2015)the Strategic Priority Research Program of the Chinese Academy of Sciences(XDB36030200)the Liao Ning Revitalization Talents Program(XLYC1907170).
文摘Green and economical CO_(2)utilization is significant for CO_(2)emission reduction and energy development.Here,the 1D Mo_(2)C nanowires with dominant(101)crystal surfaces were modified by the deposition of atomic functional components Rh and K.While unmodifiedβMo_(2)C could only convert CO_(2)to methanol,the designed catalyst of K_(0.2)Rh_(0.2)/β-Mo_(2)C exhibited up to 72.1%of ethanol selectivity at 150℃.It was observed that the atomically dispersed Rh could form the bifunctional active centres with the active carrierβMo_(2)C with the synergistic effects to achieve highly specific controlled C–C coupling.By promoting the CO_(2)adsorption and activation,the introduction of an alkali metal(K)mainly regulated the balanced performance of the two active centres,which in turn improved the hydrogenation selectivity.Overall,the controlled modification ofβMo_(2)C provides a new design strategy for the highly efficient,lowtemperature hydrogenation of CO_(2)to ethanol with single-atom catalysts,which provides an excellent example for the rational design of the complex catalysts.
基金supported by the Scholarship from China Scholarship Council(CSC)(Grant no.201604910621)。
文摘Catalyst support is extremely important for future fuel cell devices.In this work,we developed doubleshelled C/TiO2(DSCT)hollow spheres as an excellent catalyst support via a template-directed method.The combination of hollow structure,TiO2 shell and carbon layer results in excellent electron conductivity,electrocatalytic activity,and chemical stability.These uniformed DSCT hollow spheres are used as catalyst support to synthesize Pt/DSCT hollow spheres electrocatalyst.The resulting Pt/DSCT hollow spheres exhibited high catalytic performance with a current density of 462 mA mg^-1 for methanol oxidation reaction,which is 2.52 times higher than that of the commercial Pt/C.Furthermore,the increased tolerance to carbonaceous poisoning with a higher If/Ibratio and a better long-term stability in acid media suggests that the DSCT hollow sphere is a promising C/TiO2-based catalyst support for direct methanol fuel cells applications.
基金supported by a Post Doc grant of the German Academic Exchange Service(Deutscher Akademischer Austauschdienst,DAAD grant no.91552012)by the European Research Council(EU FP7 ERC advanced grant no.338846)
文摘The Fischer–Tropsch to olefins（FTO） process is a method for the direct conversion of synthesis gas to lower C–Colefins. Carbon-supported iron carbide nanoparticles are attractive catalysts for this reaction.The catalytic activity can be improved and undesired formation of alkanes can be suppressed by the addition of sodium and sulfur as promoters but the influence of their content and ratio remains poorly understood and the promoted catalysts often suffer from rapid deactivation due to particle growth. A series of carbon black-supported iron catalysts with similar iron content and nominal sodium/sulfur loadings of 1–30/0.5–5 wt% with respect to iron are prepared and characterized under FTO conditions at 1and 10 bar syngas pressure to illuminate the influence of the promoter level on the catalytic properties.Iron particles and promoters undergo significant reorganization during FTO operation under industrially relevant conditions. Low sodium content（1–3 wt%） leads to a delay in iron carbide formation. Sodium contents of 15–30 wt% lead to rapid loss of catalytic activity due to the covering of the iron surface with promoters during particle growth under FTO operation. Higher activity and slower loss of activity are observed at low promoter contents（1–3 wt% sodium and 0.5–1 wt% sulfur） but a minimum amount of alkali is required to effectively suppress methane and C–Cparaffin formation. A reference catalyst support（carbide-derived carbon aerogel） shows that the optimum promoter level depends on iron particle size and support pore structure.
基金The National Natural Science Foundation of China(22078317,21878288,21721004,21690083)。
文摘The performance of lignin depolymerization is basically determined by the interunit C–O and C–C bonds.Numerous C–O bond cleavage strategies have been developed, while the cleavage of C–C bond between the primary aromatic units remains a challenging task due to the high dissociation energy of C–C bond.Herein, a multifunctional Ru Re alloy catalyst was designed, which exhibited exceptional catalytic activity for the cleavage of both C–O and C–C linkages in a broad range of lignin model compounds(β-1, a-5, 5–5,β-O-4, 4-O-5) and two stubborn lignins(kraft lignin and alkaline lignin), affording 97.5% overall yield of monocyclic compounds from model compounds and up to 129% of the maximum theoretical yield of monocyclic products based on C–O bonds cleavage from realistic lignin. Scanning transmission electron microscopy(STEM) characterization showed that Ru Re(1:1) alloy particles with hexagonal close-packed structure were homogeneously dispersed on the support. Quasi-in situ X-ray photoelectron spectroscopy(XPS), and X-ray absorption spectroscopy(XAS) indicate that Ru species were predominantly metallic state, whereas Re species were partially oxidized;meanwhile, there was a strong interaction between Ru and Re, where the electron transfer from Re to Ru was occurred, resulting in great improvement on the capability of C–O and C–C bonds cleavage in lignin conversion.
基金supported by the National Natural Science Foundation of China(51722103,52071231 and 51571149)the Natural Science Foundation of Tianjin City(19JCJQJC61900)。
文摘Atomically dispersed iron-nitrogen-carbon(Fe-N-C) catalysts have emerged as the most promising alternative to the expensive Pt-based catalysts for the oxygen reduction reaction(ORR) in proton exchange membrane fuel cells(PEMFCs),however suffer from low site density of active Fe-N4 moiety and limited mass transport during the catalytic reaction.To address these challenges,we report a three-dimensional(3D) metal-organic frameworks(MOF)-derived Fe-N-C single-atom catalyst.In this well-designed Fe-N-C catalyst,the micro-scale interconnected skeleton,the nano-scale ordered pores and the atomic-scale abundant carbon edge defects inside the skeleton significantly enhance the site density of active Fe-N4 moiety,thus improving the Fe utilization in the final catalyst.Moreover,the combination of the above mentioned micro-and nano-scale structures greatly facilitates the mass transport in the 3D Fe-N-C catalyst.Therefore,the multiscale engineered Fe-N-C single-atom catalyst achieves excellent ORR performance under acidic condition and affords a significantly enhanced current density and power density in PEMFC.Our findings may open new opportunities for the rational design of FeN-C catalysts through multiscale structural engineering.
文摘The catalyst screening tests for carbon dioxide oxidative coupling of methane (CO2-OCM) have been investigated over ternary and binary metal oxide catalysts. The catalysts are prepared by doping MgO- and CeO2-based solids with oxides from alkali (Li2O), alkaline earth (CaO), and transition metal groups (WO3 or MnO). The presence of the peroxide (O2-2) active sites on the Li2O2, revealed by Raman spectroscopy, may be the key factor in the enhanced performance of some of the Li2O/MgO catalysts. The high reducibility of the CeO2 catalyst, an important factor in the CO2-OCM catalyst activity, may be enhanced by the presence of manganese oxide species. The manganese oxide species increases oxygen mobility and oxygen vacancies in the CeO2 catalyst. Raman and Fourier Transform Infra Red (FT-IR) spectroscopies revealed the presence of lattice vibrations of metal-oxygen bondings and active sites in which the peaks corresponding to the bulk crystalline structures of Li2O, CaO, WO3 and MnO are detected. The performance of 5%MnO/15%CaO/CeO2 catalyst is the most potential among the CeO2-based catalysts, although lower than the 2%Li2O/MgO catalyst. The 2%Li2O/MgO catalyst showed the most promising C2+ hydrocarbons selectivity and yield at 98.0% and 5.7%, respectively.
文摘The results of commercial application of two types of C_8 aromatics isomerization catalysts under different feed conditions were compared to gain an insight in the techno-economical basis for selecting proper technological route at the plant.The comparison reveals differences in every aspect of feed consumption,unit capacity,product output,product distribution,and unit process parameters depending upon which catalyst type is adopted by the integrated PX complex.The type of aromatics isomerization catalyst has its influence on the plant scale,the construction cost,the process unit capacity and the product cost,with the magnitude of its impact varying with changing feed conditions.
基金the National Key R&D Program of China(2018YFE0122600)the National Natural Science Foundation of China(21802070).
文摘Carbonate-modified metal-support interfaces allow Ru/MnCO_(3) catalyst to exhibit over 99% selectivity,great specific activity and long-term anti-CO poisoning stability in atmospheric CO_(2) methanation.As a contrast,Ru/MnO catalyst with metal-oxide interfaces prefers reverse water-gas shift rather than methanation route,along with a remarkably lower activity and a less than 15% CH_(4) selectivity.The carbonatemodified interfaces are found to stabilize the Ru species and activate CO_(2) and H_(2) molecules.Ru-CO^(4) species are identified as the reaction intermediates steadily formed from CO_(2) dissociation,which show moderate adsorption strength and high reactivity in further hydrogenation to CH_(4),Furthermore,carbonates of Ru/MnCO_(3) are found to be consumed by hydrogenation to form CH_(4) and replenished by exchange with CO_(2),which are in a dynamic equilibrium during the reaction.Modification with surface carbonates is proved as an efficient strategy to endow metal-support interfaces of Ru-based catalysts with unique catalytic functions for selective CO_(2) hydrogenation.
基金financial supports from National Key R&D Plan of China (2017YFB0102803)the National Natural Science Foundation of China (21676135)+8 种基金Scientific Instrument Develop Major Project of National Natural Science Foundation of China (51627810)Joint Funds of the National Natural Science Foundation and Liaoning of China (U1508202)Key R&D programs in Jiangsu (BE2018051)“333” project of Jiangsu Province (BRA2018007)Natural Science Foundation of Jiangsu Province (BK20161273, BK20181199)the Graduate Innovation Foundation of Nanjing university (2017ZDL05)support of PAPD of Jiangsu Higher Education Institutions“Six Talent Peaks Program” of Jiangsu ProvinceFundamental Research Funds for the Central Universities, China。
文摘A series of Pt/C catalysts for proton exchange membrane fuel cells(PEMFCs) with various metal loadings is synthesized by a microwave-assisted polyol process via mixing an extremely stable platinum colloid(> 3 months’ shelf life) from single batch preparation with activated carbon ethylene glycol suspension.21 wt%, 42 wt% and 61 wt% Pt loadings are employed to showcase the advantages of the improved polyol process. The ultraviolet(UV)–visible spectra and ζ-potential measurements are conducted to monitor the wet chemistry process during catalyst preparation. The powder X-ray diffraction(XRD), transmission electron microscopy(TEM) and thermogravimetric analysis(TGA) characterizations are carried out on catalysts. The catalyst activities are investigated using electrochemical and single cell tests. The stability of Pt nanoparticle colloid is explored by ORR, cyclic voltammetry(CV) and ζ-potential measurements. The TEM results show the Pt particle sizes of the colloid, and the sizes of the 21 wt%, 42 wt% and 61 wt%Pt/C samples are 2.1–3.9 nm. Because of the high Pt dispersion, the Pt/C catalysts exhibit superior electroactivity toward ORR. In addition, four 61 wt% Pt/C catalysts made from the Pt colloid with 0–3 months’ shelf life show almost the same performance, which exhibits superior stability of the Pt colloid system without surfactant protection.
基金financially supported by the National Natural Science Foundation of China(No.21972099)the National Natural Science Foundation of China(National Special Scientific Research Instrument and Equipment Development)(No.21427803-2)the 111 project(No.B17030)。
文摘The activity of Mo_(2) C-based catalyst on vegetable oil conversion into biofuel could be greatedly promoted by tuning the carbon content,while its modification mechanism on the surface properties remained elusive.Herein,the exposed active sites,the particle size and Lewis acid amount of Ni-Mo_(2) C/MCM-41 catalysts were regulated by varying CH_(4) content in carbonization gas.The activity of Ni-Mo_(2) C/MCM-41 catalysts in jatropha oil(JO)conversion showed a volcano-like trend over the catalysts with increasing CH_(4) content from 15%to 50%in the preparation process.The one prepared by 25%CH_(4) content(NiMo_(2) C(25)/MCM-41)exhibited the outstanding catalytic performance with 83.9 wt%biofuel yield and95.2%C_(15)-C_(18) selectivity.Such a variation of activity was ascribed to the most exposed active sites,the smallest particle size,and the lowest Lewis acid amount from Ni^(0) on the Ni-Mo_(2) C(25)/MCM-41 catalyst surface.Moreover,the Ni-Mo_(2) C(25)/MCM-41 catalyst could also effectively catalyze the conversion of crude waste cooking oil(WCO)into green diesel.This study offers an effective strategy to improve catalytic performance of molybdenum carbide catalyst on vegetable oil conversion.
基金supported by the National Natural Science Foundation of China (22008098, 21978156, 42002040)the Program for Innovative Research Team (in Science and Technology) in University of Henan Province (21IRTSTHN004)+1 种基金the Program for Science & Technology Innovation Talents in Universities of Henan Province (22HASTIT008)the Foundation of State Key Laboratory of High-efficiency Utilization of Coal and Green Chemical Engineering (2022-K34)。
文摘Catalytic hydrogenation of CO_(2) using renewable hydrogen not only reduces greenhouse gas emissions,but also provides industrial chemicals.Herein,a Co-Fe bimetallic catalyst was developed by a facile reactive ball-milling method for highly active and selective hydrogenation of CO_(2) to value-added hydrocarbons.When reacted at 320℃,1.0 MPa and 9600 mL h^(-1) g_(cat)^(-1),the selectivity to light olefin(C_(2)^(=)-C_(4)^(=)) and C_(5)+ species achieves 57.3% and 22.3%,respectively,at a CO_(2) co nversion of 31.4%,which is superior to previous Fe-based catalysts.The CO_(2) activation can be promoted by the CoFe phase formed by reactive ball milling of the Fe-Co_(3)O_(4) mixture,and the in-situ Co_(2)C and Fe_(5)C_(2) formed during hydrogenation are beneficial for the C-C coupling reaction.The initial C-C coupling is related to the combination of CO species with the surface carbon of Fe/Co carbides,and the sustained C-C coupling is maintained by self-recovery of defective carbides.This new strategy contributes to the development of efficient catalysts for the hydrogenation of CO_(2) to value-added hydrocarbons.
基金supported by the National Thousand Talents Plan of Chinathe National Natural Science Foundation of China(Grant Nos.21673014 and U1766216)+1 种基金the 111 project(B17002)funded by the Ministry of Education of Chinathe Fundamental Research Funds for the Central Universities of China
文摘Proton exchange membrane fuel cells(PEMFC)have attracted much attention because of their high energy conversion efficiency,high power density and zero emission of pollutants.However,the high cost of the cathode platinum group metal(PGM)catalysts creates a barrier for the large-scale application of PEMFC.Tremendous efforts have been devoted to the development of low-cost PGM-free catalysts,especially the Fe-N-C catalysts,to replace the expensive PGM catalysts.However,the characterization methods and evaluation standards of the catalysts varies,which is not conducive to the comparison of PGM-free catalysts.U.S.Department of energy(DOE)is the only authority that specifies the testing standards and activity targets for PGM-free catalysts.In this review,the major breakthroughs of Fe-N-C catalysts are outlined with the reference of DOE standards and targets.The preparation and characteristics of these highly active Fe-N-C catalysts are briefly introduced.Moreover,the efforts on improving the mass transfer and the durability issue of Fe-N-C fuel cell are discussed.Finally,the prospective directions concerning the comprehensive evaluation of the Fe-N-C catalysts are proposed.
基金support from the Ministry of Science and Technology (Nos.2012BAC20B10)the National Natural Science Foundation of China (Nos. 21321061 and 20976109)
文摘In this work,the influence of CO2 on the structural variation and catalytic performance of Na2WO4/Mn/Si O2 for oxidative coupling of methane to ethylene was investigated. The catalyst was prepared by impregnation method and characterized by XRD,Raman and XPS techniques. Appropriate amount of CO2 in the reactant gases enhanced the formation of surface tetrahedral Na2WO4 species and promoted the migration of O in MOx,Na,W from the catalyst bulk to surface,which were favorable for oxidative coupling of methane. When the molar ratio of CH4/O2/CO2 was 3/1/2,enriched surface tetrahedral Na2WO4 species and high surface concentration of O in MOx,Na,W were detected,and then high CH4 conversion of 33.1% and high C2H4 selectivity of 56.2% were obtained. With further increase of CO2 in the reagent gases,the content of active surface tetrahedral Na2WO4 species and surface concentration of O in MOx,Na,W decreased,while that of inactive species（Mn WO4 and Mn2O3） increased dramatically,leading to low CH4 conversion and low C2H4 selectivity. It could be speculated that Na2WO4 crystal was transformed into Mn WO4 crystal with excessive CO2 added under the reaction conditions. Pretreatment of Na2WO4/Mn/Si O2 catalyst by moderate amount of CO2 before OCM also promoted the formation of Na2WO4 species.
