The ability to replicate the microenvironment of the human body through the fabrication of scaffolds is a significant achievement in the biomedical field.However,the search for the ideal scaffold is still in its infan...The ability to replicate the microenvironment of the human body through the fabrication of scaffolds is a significant achievement in the biomedical field.However,the search for the ideal scaffold is still in its infancy and there are significant challenges to overcome.In the modern era,the scientific community is increasingly turned to natural substances due to their superior biological ability,lower cost,biodegradability,and lower toxicity than synthetic lab-made products.Chitosan is a well-known polysaccharide that has recently garnered a high amount of attention for its biological activities,especially in 3D bone tissue engineering.Chitosan closely matches the native tissues and thus stands out as a popular candidate for bioprinting.This review focuses on the potential of chitosan-based scaffolds for advancements and the drawbacks in bone treatment.Chitosan-based nanocomposites have exhibited strong mechanical strength,water-trapping ability,cellular interaction,and biodegradability.Chitosan derivatives have also encouraged and provided different routes for treatment and enhanced biological activities.3D tailored bioprinting has opened new doors for designing and manufacturing scaffolds with biological,mechanical,and topographical properties.展开更多
The creation of biomimetic cell environments with micro and nanoscale topographical features resembling native tissues is critical for tissue engineering. To address this challenge, this study focuses on an innovative...The creation of biomimetic cell environments with micro and nanoscale topographical features resembling native tissues is critical for tissue engineering. To address this challenge, this study focuses on an innovative electrospinning strategy that adopts a symmetrically divergent electric field to induce rapid self-assembly of aligned polycaprolactone(PCL) nanofibers into a centimeter-scale architecture between separately grounded bevels. The 3D microstructures of the nanofiber scaffolds were characterized through a series of sectioning in both vertical and horizontal directions. PCL/collagen(type I)nanofiber scaffolds with different density gradients were incorporated in sodium alginate hydrogels and subjected to elemental analysis. Human fibroblasts were seeded onto the scaffolds and cultured for 7 days. Our studies showed that the inclination angle of the collector had significant effects on nanofiber attributes, including the mean diameter, density gradient, and alignment gradient. The fiber density and alignment at the peripheral area of the 45°-collector decreased by 21% and 55%, respectively, along the z-axis,while those of the 60°-collector decreased by 71% and 60%, respectively. By altering the geometry of the conductive areas on the collecting bevels, polyhedral and cylindrical scaffolds composed of aligned fibers were directly fabricated. By using a four-bevel collector, the nanofibers formed a matrix of microgrids with a density of 11%. The gradient of nitrogen-to-carbon ratio in the scaffold-incorporated hydrogel was consistent with the nanofiber density gradient. The scaffolds provided biophysical stimuli to facilitate cell adhesion, proliferation, and morphogenesis in 3D.展开更多
Atomically thin two-dimensional （2D） layered materials have potential applications in nanoelectronics, nanophoton- ics, and integrated optoelectronics. Band gap engineering of these 2D semiconductors is critical for...Atomically thin two-dimensional （2D） layered materials have potential applications in nanoelectronics, nanophoton- ics, and integrated optoelectronics. Band gap engineering of these 2D semiconductors is critical for their broad applications in high-performance integrated devices, such as broad-band photodetectors, multi-color light emitting diodes （LEDs）, and high-efficiency photovoltaic devices. In this review, we will summarize the recent progress on the controlled growth of composition modulated atomically thin 2D semiconductor alloys with band gaps tuned in a wide range, as well as their induced applications in broadly tunable optoelectronic components. The band gap engineered 2D semiconductors could open up an exciting opportunity for probing their fundamental physical properties in 2D systems and may find diverse applications in functional electronic/optoelectronic devices.展开更多
Perovskite solar cell(PSC) has gradually shown its great superiority in photovoltaic filed to compete commercial solar cells owing to its great advantages, such as high efficiency and low fabrication cost. On the way ...Perovskite solar cell(PSC) has gradually shown its great superiority in photovoltaic filed to compete commercial solar cells owing to its great advantages, such as high efficiency and low fabrication cost. On the way towards commercialization, great efforts have been achieved by accelerating charge extraction and reducing carrier recombination. Recently, two-dimensional(2 D) layered materials have attracted increasing interests for application in PSCs due to their distinctive chemical and physical properties, such as high carrier mobility and tunable bandgap, which greatly determines the perovskite film growth kinetics, carrier transfer and stability of PSCs. Therefore, with the aim to better understand their recent development and application in PSC, in this review, the emerging 2D materials beyond graphene as charge transport layers, buffer layers and additives in perovskite film for enhancing the efficiency and stability of PSCs are summarized. However, there are still some crucial challenges to be addressed for commercialization. Finally, the challenges and prospects of these 2D nanomaterials for application in PSCs are further proposed for future development.展开更多
Recently, two dimensional In Se attracts great attentions as potential hydrogen production photocatalysts.Here, comprehensive investigations on the hydrogen evolution reaction activity of In Se monolayer with3 d trans...Recently, two dimensional In Se attracts great attentions as potential hydrogen production photocatalysts.Here, comprehensive investigations on the hydrogen evolution reaction activity of In Se monolayer with3 d transition metal doping and biaxial strain were performed based on the density functional theory.Transition metal dopants significantly increase the bonding strength between H and Se, and then adjust the hydrogen adsorption free energy to 0.02 e V by Zn doping. The enhanced hydrogen evolution reaction activity results from less electron occupying H 1 s-Se 4 pzanti-bonding states, which is well correlated with the pzband center level. Importantly, the universal scalling law was proposed to descript the evolution of hydrogen adsorption free energy including both doping and strain effects. Moreover, with appropriate band alignment, optical absorption, and carriers separation ability, Zn doped In Se monolayer is considered as a promising candidate of visible-light photocatalyst for hydrogen production.展开更多
The design and preparation of novel quantum materials with atomic precision are crucial for exploring new physics and for device applications.Electron irradiation has been demonstrated as an effective method for prepa...The design and preparation of novel quantum materials with atomic precision are crucial for exploring new physics and for device applications.Electron irradiation has been demonstrated as an effective method for preparing novel quantum materials and quantum structures that could be challenging to obtain otherwise.It features the advantages of precise control over the patterning of such new materials and their integration with other materials with different functionalities.Here,we present a new strategy for fabricating freestanding monolayer SiC within nanopores of a graphene membrane.By regulating the energy of the incident electron beam and the in-situ heating temperature in a scanning transmission electron microscope(STEM),we can effectively control the patterning of nanopores and subsequent growth of monolayer SiC within the graphene lattice.The resultant SiC monolayers seamlessly connect with the graphene lattice,forming a planar structure distinct by a wide direct bandgap.Our in-situ STEM observations further uncover that the growth of monolayer SiC within the graphene nanopore is driven by a combination of bond rotation and atom extrusion,providing new insights into the atom-by-atom self-assembly of freestanding two-dimensional(2D)monolayers.展开更多
In view of the limitations of traditional measurement methods in the field of building information,such as complex operation,low timeliness and poor accuracy,a new way of combining three-dimensional scanning technolog...In view of the limitations of traditional measurement methods in the field of building information,such as complex operation,low timeliness and poor accuracy,a new way of combining three-dimensional scanning technology and BIM(Building Information Modeling)model was discussed.Focused on the efficient acquisition of building geometric information using the fast-developing 3D point cloud technology,an improved deep learning-based 3D point cloud recognition method was proposed.The method optimised the network structure based on RandLA-Net to adapt to the large-scale point cloud processing requirements,while the semantic and instance features of the point cloud were integrated to significantly improve the recognition accuracy and provide a precise basis for BIM model remodeling.In addition,a visual BIM model generation system was developed,which systematically transformed the point cloud recognition results into BIM component parameters,automatically constructed BIM models,and promoted the open sharing and secondary development of models.The research results not only effectively promote the automation process of converting 3D point cloud data to refined BIM models,but also provide important technical support for promoting building informatisation and accelerating the construction of smart cities,showing a wide range of application potential and practical value.展开更多
文摘The ability to replicate the microenvironment of the human body through the fabrication of scaffolds is a significant achievement in the biomedical field.However,the search for the ideal scaffold is still in its infancy and there are significant challenges to overcome.In the modern era,the scientific community is increasingly turned to natural substances due to their superior biological ability,lower cost,biodegradability,and lower toxicity than synthetic lab-made products.Chitosan is a well-known polysaccharide that has recently garnered a high amount of attention for its biological activities,especially in 3D bone tissue engineering.Chitosan closely matches the native tissues and thus stands out as a popular candidate for bioprinting.This review focuses on the potential of chitosan-based scaffolds for advancements and the drawbacks in bone treatment.Chitosan-based nanocomposites have exhibited strong mechanical strength,water-trapping ability,cellular interaction,and biodegradability.Chitosan derivatives have also encouraged and provided different routes for treatment and enhanced biological activities.3D tailored bioprinting has opened new doors for designing and manufacturing scaffolds with biological,mechanical,and topographical properties.
基金financially supported by the Foundation of the Whitacre College of Engineering and the Office of Vice President for Research at Texas Tech University
文摘The creation of biomimetic cell environments with micro and nanoscale topographical features resembling native tissues is critical for tissue engineering. To address this challenge, this study focuses on an innovative electrospinning strategy that adopts a symmetrically divergent electric field to induce rapid self-assembly of aligned polycaprolactone(PCL) nanofibers into a centimeter-scale architecture between separately grounded bevels. The 3D microstructures of the nanofiber scaffolds were characterized through a series of sectioning in both vertical and horizontal directions. PCL/collagen(type I)nanofiber scaffolds with different density gradients were incorporated in sodium alginate hydrogels and subjected to elemental analysis. Human fibroblasts were seeded onto the scaffolds and cultured for 7 days. Our studies showed that the inclination angle of the collector had significant effects on nanofiber attributes, including the mean diameter, density gradient, and alignment gradient. The fiber density and alignment at the peripheral area of the 45°-collector decreased by 21% and 55%, respectively, along the z-axis,while those of the 60°-collector decreased by 71% and 60%, respectively. By altering the geometry of the conductive areas on the collecting bevels, polyhedral and cylindrical scaffolds composed of aligned fibers were directly fabricated. By using a four-bevel collector, the nanofibers formed a matrix of microgrids with a density of 11%. The gradient of nitrogen-to-carbon ratio in the scaffold-incorporated hydrogel was consistent with the nanofiber density gradient. The scaffolds provided biophysical stimuli to facilitate cell adhesion, proliferation, and morphogenesis in 3D.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11374092,61474040,61574054,and 61505051)the Aid Program for Science and Technology Innovative Research Team in Higher Educational Institutions of Hunan Province,Chinathe Science and Technology Department of Hunan Province,China(Grant No.2014FJ2001)
文摘Atomically thin two-dimensional （2D） layered materials have potential applications in nanoelectronics, nanophoton- ics, and integrated optoelectronics. Band gap engineering of these 2D semiconductors is critical for their broad applications in high-performance integrated devices, such as broad-band photodetectors, multi-color light emitting diodes （LEDs）, and high-efficiency photovoltaic devices. In this review, we will summarize the recent progress on the controlled growth of composition modulated atomically thin 2D semiconductor alloys with band gaps tuned in a wide range, as well as their induced applications in broadly tunable optoelectronic components. The band gap engineered 2D semiconductors could open up an exciting opportunity for probing their fundamental physical properties in 2D systems and may find diverse applications in functional electronic/optoelectronic devices.
基金supported by the National Natural Science Foundation of China (U1802257, 22109053, 61774139, and 62004083)the Guangdong Basic and Applied Basic Research Foundation(2020A1515110548)+2 种基金the Guangzhou Science and Technology Planning Project (202102020775, 202102010091)the Natural Science Foundation of Guangdong Province (2019B151502061)the Fundamental Research Funds for the Central Universities(21620348)。
文摘Perovskite solar cell(PSC) has gradually shown its great superiority in photovoltaic filed to compete commercial solar cells owing to its great advantages, such as high efficiency and low fabrication cost. On the way towards commercialization, great efforts have been achieved by accelerating charge extraction and reducing carrier recombination. Recently, two-dimensional(2 D) layered materials have attracted increasing interests for application in PSCs due to their distinctive chemical and physical properties, such as high carrier mobility and tunable bandgap, which greatly determines the perovskite film growth kinetics, carrier transfer and stability of PSCs. Therefore, with the aim to better understand their recent development and application in PSC, in this review, the emerging 2D materials beyond graphene as charge transport layers, buffer layers and additives in perovskite film for enhancing the efficiency and stability of PSCs are summarized. However, there are still some crucial challenges to be addressed for commercialization. Finally, the challenges and prospects of these 2D nanomaterials for application in PSCs are further proposed for future development.
基金supported by the National Natural Science Foundation of China(11804023)the Natural Science Foundation of Tianjin(18JCQNJC02700)。
文摘Recently, two dimensional In Se attracts great attentions as potential hydrogen production photocatalysts.Here, comprehensive investigations on the hydrogen evolution reaction activity of In Se monolayer with3 d transition metal doping and biaxial strain were performed based on the density functional theory.Transition metal dopants significantly increase the bonding strength between H and Se, and then adjust the hydrogen adsorption free energy to 0.02 e V by Zn doping. The enhanced hydrogen evolution reaction activity results from less electron occupying H 1 s-Se 4 pzanti-bonding states, which is well correlated with the pzband center level. Importantly, the universal scalling law was proposed to descript the evolution of hydrogen adsorption free energy including both doping and strain effects. Moreover, with appropriate band alignment, optical absorption, and carriers separation ability, Zn doped In Se monolayer is considered as a promising candidate of visible-light photocatalyst for hydrogen production.
基金supports from the Electron Microscopy Center at the University of Chinese Academy of Sciencesfinancially supported by the Ministry of Science and Technology (MOST)of China (Grant No.2018YFE0202700)+3 种基金the Beijing Outstanding Young Scientist Program (Grant No.BJJWZYJH01201914430039)the China National Postdoctoral Program for Innovative Talents (Grant No.BX2021301)the Fundamental Research Funds for the Central Universitiesthe Research Funds of Renmin University of China (Grants No.22XNKJ30)。
文摘The design and preparation of novel quantum materials with atomic precision are crucial for exploring new physics and for device applications.Electron irradiation has been demonstrated as an effective method for preparing novel quantum materials and quantum structures that could be challenging to obtain otherwise.It features the advantages of precise control over the patterning of such new materials and their integration with other materials with different functionalities.Here,we present a new strategy for fabricating freestanding monolayer SiC within nanopores of a graphene membrane.By regulating the energy of the incident electron beam and the in-situ heating temperature in a scanning transmission electron microscope(STEM),we can effectively control the patterning of nanopores and subsequent growth of monolayer SiC within the graphene lattice.The resultant SiC monolayers seamlessly connect with the graphene lattice,forming a planar structure distinct by a wide direct bandgap.Our in-situ STEM observations further uncover that the growth of monolayer SiC within the graphene nanopore is driven by a combination of bond rotation and atom extrusion,providing new insights into the atom-by-atom self-assembly of freestanding two-dimensional(2D)monolayers.
文摘In view of the limitations of traditional measurement methods in the field of building information,such as complex operation,low timeliness and poor accuracy,a new way of combining three-dimensional scanning technology and BIM(Building Information Modeling)model was discussed.Focused on the efficient acquisition of building geometric information using the fast-developing 3D point cloud technology,an improved deep learning-based 3D point cloud recognition method was proposed.The method optimised the network structure based on RandLA-Net to adapt to the large-scale point cloud processing requirements,while the semantic and instance features of the point cloud were integrated to significantly improve the recognition accuracy and provide a precise basis for BIM model remodeling.In addition,a visual BIM model generation system was developed,which systematically transformed the point cloud recognition results into BIM component parameters,automatically constructed BIM models,and promoted the open sharing and secondary development of models.The research results not only effectively promote the automation process of converting 3D point cloud data to refined BIM models,but also provide important technical support for promoting building informatisation and accelerating the construction of smart cities,showing a wide range of application potential and practical value.
