Chaoshan drawnwork handkerchief design exhibits self-similarity and fractal characteristics due to their grid-based structure,overall symmetry,and the way local motifs reflect the whole pattern.To explore the potentia...Chaoshan drawnwork handkerchief design exhibits self-similarity and fractal characteristics due to their grid-based structure,overall symmetry,and the way local motifs reflect the whole pattern.To explore the potential of fractals in traditional textile design,a fractal-based generative framework was proposed for efficiently creating drawnwork patterns suitable for practical handicraft production.The research was initiated with an analysis of the structural composition of center,skeleton,and filler motifs extracted from a pattern sample library.Based on this hierarchical classification,the box-counting method was employed to calculate their respective fractal dimensions.Building on fractal art theory,generative algorithms,and studies on the application of Ultra Fractal,a Chaoshan drawnwork fractal design model was established.Using this model,51 drawnwork fractal patterns and 153 handkerchief patterns were generated.These patterns were subsequently applied in real-world production to validate the feasibility and value of fractal techniques in textile design.展开更多
This paper considers the short-range sensing imple-mentation in continuous-wave(CW)phased array systems.We specifically address this CW short-range sensing challenges stemming from the self-interference cancellation(S...This paper considers the short-range sensing imple-mentation in continuous-wave(CW)phased array systems.We specifically address this CW short-range sensing challenges stemming from the self-interference cancellation(SIC)operation and synthesis requirement of arbitrary beampatterns for the sensing purpose,which has rarely been researched before.In this paper,unlike the only existed work that exploits the heuris-tic method and shares no analytical solution,an SIC pattern syn-thesis design is presented with a closed-form solution.By utiliz-ing the null-space projection(NSP)method,the proposed method effectively mitigates the self-interference to enable the in-band full-duplex operation of the array system.Subsequently,the NSP design will be innovatively embedded in a singular value decomposition(SVD)based weighted alternating reserve projec-tion(WARP)approach to efficiently synthesize an arbitrary desired pattern by solving a unique rank-deficient weighted least mean square problem.Numerical results validate the effective-ness of the proposed method in terms of beampattern,SIC per-formance,and sensing performance.展开更多
An experimental and finite element simulation investigation are conducted to study the deformation patterns of steel targets during the penetration process of tungsten alloy long rods,as well as the influence of stren...An experimental and finite element simulation investigation are conducted to study the deformation patterns of steel targets during the penetration process of tungsten alloy long rods,as well as the influence of strength of the target on the deformation patterns.The experimental results revealed slight mass loss in the first layer of the steel target during the transient entrance phase,with an extremely negligible loss in target mass during the quasi-steady penetration phase.The results of macro-analysis,micro-analysis and simulation show that the eroded target material migrated towards the periphery of the crater,causing an increase in the target's thickness,remained within the target,instead of flowing out of the crater.Therefore,the process of long rods penetrating the metal target is considered as a process of backward extrusion.By combining the backward extrusion theory with energy conservation,a penetration depth model for long rods penetrating a metal target,taking into account both the diameter of the crater and the friction coefficient between the rod and the target,has been established.Although the model is not yet perfect,it innovatively applies the principles of solid mechanics to the study of long rod penetration.Additionally,it takes into account the friction coefficient between the rod and the target during the penetration process.Therefore,this model provides a new research direction for future studies on long rod penetration.展开更多
Target maneuver recognition is a prerequisite for air combat situation awareness,trajectory prediction,threat assessment and maneuver decision.To get rid of the dependence of the current target maneuver recognition me...Target maneuver recognition is a prerequisite for air combat situation awareness,trajectory prediction,threat assessment and maneuver decision.To get rid of the dependence of the current target maneuver recognition method on empirical criteria and sample data,and automatically and adaptively complete the task of extracting the target maneuver pattern,in this paper,an air combat maneuver pattern extraction based on time series segmentation and clustering analysis is proposed by combining autoencoder,G-G clustering algorithm and the selective ensemble clustering analysis algorithm.Firstly,the autoencoder is used to extract key features of maneuvering trajectory to remove the impacts of redundant variables and reduce the data dimension;Then,taking the time information into account,the segmentation of Maneuver characteristic time series is realized with the improved FSTS-AEGG algorithm,and a large number of maneuver primitives are extracted;Finally,the maneuver primitives are grouped into some categories by using the selective ensemble multiple time series clustering algorithm,which can prove that each class represents a maneuver action.The maneuver pattern extraction method is applied to small scale air combat trajectory and can recognize and correctly partition at least 71.3%of maneuver actions,indicating that the method is effective and satisfies the requirements for engineering accuracy.In addition,this method can provide data support for various target maneuvering recognition methods proposed in the literature,greatly reduce the workload and improve the recognition accuracy.展开更多
In order to research the feasibility of using the selective adsorption principle to achieve automatic shaping of nano patterns,in this study,using the liquid gallium as the conductive ink and graphene as the printing ...In order to research the feasibility of using the selective adsorption principle to achieve automatic shaping of nano patterns,in this study,using the liquid gallium as the conductive ink and graphene as the printing plate surface,by changing the surface wettability of patterned areas on the nanoscale of graphene printed boards,the automatic formation of liquid gallium patterns on the graphene printed plate surface was simulated.The results indicated that liquid gallium can achieve automatic patterning on the surface of graphene patterned areas;the greater the interaction energy between gallium and carbon atoms,the clearer the pattern;gallium liquid is prone to remain in complex local positions of the pattern,making it difficult to shape the pattern;if the spacing between adjacent pattern lines is too large or too small,it will result in residual gallium liquid between the lines;increasing the thickness of the gallium film will cause the pattern to expand beyond the boundary,but increasing the thickness of the gallium film can also enhance the thickness and uniformity of the pattern lines.In summary,the principle of selective adsorption can be used to achieve the automatic formation of nano patterns,and the pattern formation effect is influenced by factors such as atomic interaction energy and pattern configuration.展开更多
The rapid identification of planting patterns for major crops in a large irrigated district has vital importance for irrigation management,water fee collection,and crop yield estimation.In this study,the OTSU algorith...The rapid identification of planting patterns for major crops in a large irrigated district has vital importance for irrigation management,water fee collection,and crop yield estimation.In this study,the OTSU algorithm and Mean-Shift algorithm were employed to automatically determine threshold values for mapping two main rotated crop patterns at the pixel scale.A time series analysis was conducted to extract the spatial distribution of rice-wheat and wheat-maize rotations in the Chuanhang irrigation district from 2016 to 2020.The results demonstrate that both threshold segmentation algorithms are reliable in extracting the spatial distribution of the crops,with an overall accuracy exceeding 80%.Additionally,both Kappa coefficients surpass 0.7,indicating better performance by OTSU method.Over the period from 2016 to 2020,the area occupied by rice-wheat rotation cropping ranged from 12500 to 14400 hm 2;whereas wheat-maize rotation cropping exhibited smaller and more variable areas ranging from 19730 to 34070 hm 2.These findings highlight how remote sensing-based approaches can provide reliable support for rapidly and accurately identifying the spatial distribution of main crop rotation patterns within a large irrigation district.展开更多
Looking upon every encoding state of quantum information systems as a quantum information pattern, A kind of pattern-distance between different patterns as a measurement of comparability of quantum information pattern...Looking upon every encoding state of quantum information systems as a quantum information pattern, A kind of pattern-distance between different patterns as a measurement of comparability of quantum information patterns is defined, and two kinds of recognition algorithms based on pattern-distance for quantum information are proposed. They can respectively recognize quantum information with known objective pattern and unknown objective pattern. In the two algorithms, the phases and occurrence probabilities of different eigenpattems of quantum information are sufficiently considered. Two examples demonstrate the feasibility and effectiveness of the two recognition methods. These algorithms point out a new and important path for applications of quantum information and pattern recognition.展开更多
Given a set U which is consisted of strings defined on alphabet Σ, string cross pattern matching is to find all the matches between every two strings in U. It is utilized in text processing like removing the duplicat...Given a set U which is consisted of strings defined on alphabet Σ, string cross pattern matching is to find all the matches between every two strings in U. It is utilized in text processing like removing the duplication of strings. This paper presents a fast string cross pattern matching algorithm based on extracting high frequency strings. Compared with existing algorithms including single-pattern algorithms and multi-pattern matching algorithms, this algorithm is featured by both low time complexity and low space complexity. Because Chinese alphabet is large and the average length of Chinese words is much short, this algorithm is more suitable to process the text written by Chinese, especially when the size of Σ is large and the number of strings is far more than the maximum length of strings of set U.展开更多
A hybrid method for synthesizing antenna＇s three dimensional （3D） pattern is proposed to obtain the low sidelobe feature of truncated cone conformal phased arrays. In this method, the elements of truncated cone con...A hybrid method for synthesizing antenna＇s three dimensional （3D） pattern is proposed to obtain the low sidelobe feature of truncated cone conformal phased arrays. In this method, the elements of truncated cone conformal phased arrays are projected to the tangent plane in one generatrix of the truncated cone. Then two dimensional （2D） Chebyshev amplitude distribution optimization is respectively used in two mutual vertical directions of the tangent plane. According to the location of the elements, the excitation current amplitude distribution of each element on the conformal structure is derived reversely, then the excitation current amplitude is further optimized by using the genetic algorithm （GA）. A truncated cone problem with 8x8 elements on it, and a 3D pattern desired side lobe level （SLL） up to 35 dB, is studied. By using the hybrid method, the optimal goal is accomplished with acceptable CPU time, which indicates that this hybrid method for the low sidelobe synthesis is feasible.展开更多
An automatic three-dimensional(3D) reconstruction method based on four-view stereo vision using checkerboard pattern is presented. Mismatches easily exist in traditional binocular stereo matching due to the repeatable...An automatic three-dimensional(3D) reconstruction method based on four-view stereo vision using checkerboard pattern is presented. Mismatches easily exist in traditional binocular stereo matching due to the repeatable or similar features of binocular images. In order to reduce the probability of mismatching and improve the measure precision, a four-camera measurement system which can add extra matching constraints and offer multiple measurements is applied in this work. Moreover, a series of different checkerboard patterns are projected onto the object to obtain dense feature points and remove mismatched points. Finally, the 3D model is generated by performing Delaunay triangulation and texture mapping on the point cloud obtained by four-view matching. This method was tested on the 3D reconstruction of a terracotta soldier sculpture and the Buddhas in the Mogao Grottoes. Their point clouds without mismatched points were obtained and less processing time was consumed in most cases relative to binocular matching. These good reconstructed models show the effectiveness of the method.展开更多
This work describes an experimental investigation into the influence of geometric micro-groove texture patterns on the tribological performance of stainless steel.Five geometries were studied:one with untextured and f...This work describes an experimental investigation into the influence of geometric micro-groove texture patterns on the tribological performance of stainless steel.Five geometries were studied:one with untextured and four with micro-groove textured making parallel,triangular,square and hexagonal patterns.The micro-groove textures were produced using an MFT-20laser system as well as a two-step laser surface texturing(LST)process.Tribological performance was measured using a pin-on-disk tribometer.The investigation showed that the two-step LST process could fabricate high-precision micro-grooves.The experimental data indicated that the micro-groove textured surfaces achieved the lower frictional coefficients than the untextured surface and the geometric patterns had significantly affected the tribological properties of samples in both lubricated and unlubricated states.The results were analyzed from the lubricant supplying and fluid dynamic pressure effect under lubricated conditions as well as abrasive capture and remove under dry friction conditions.展开更多
文摘Chaoshan drawnwork handkerchief design exhibits self-similarity and fractal characteristics due to their grid-based structure,overall symmetry,and the way local motifs reflect the whole pattern.To explore the potential of fractals in traditional textile design,a fractal-based generative framework was proposed for efficiently creating drawnwork patterns suitable for practical handicraft production.The research was initiated with an analysis of the structural composition of center,skeleton,and filler motifs extracted from a pattern sample library.Based on this hierarchical classification,the box-counting method was employed to calculate their respective fractal dimensions.Building on fractal art theory,generative algorithms,and studies on the application of Ultra Fractal,a Chaoshan drawnwork fractal design model was established.Using this model,51 drawnwork fractal patterns and 153 handkerchief patterns were generated.These patterns were subsequently applied in real-world production to validate the feasibility and value of fractal techniques in textile design.
基金supported by the National Natural Science Foundation of China(62001227)the Academy of Finland(315858341489).
文摘This paper considers the short-range sensing imple-mentation in continuous-wave(CW)phased array systems.We specifically address this CW short-range sensing challenges stemming from the self-interference cancellation(SIC)operation and synthesis requirement of arbitrary beampatterns for the sensing purpose,which has rarely been researched before.In this paper,unlike the only existed work that exploits the heuris-tic method and shares no analytical solution,an SIC pattern syn-thesis design is presented with a closed-form solution.By utiliz-ing the null-space projection(NSP)method,the proposed method effectively mitigates the self-interference to enable the in-band full-duplex operation of the array system.Subsequently,the NSP design will be innovatively embedded in a singular value decomposition(SVD)based weighted alternating reserve projec-tion(WARP)approach to efficiently synthesize an arbitrary desired pattern by solving a unique rank-deficient weighted least mean square problem.Numerical results validate the effective-ness of the proposed method in terms of beampattern,SIC per-formance,and sensing performance.
基金supported by the National Natural Science Foundation of China(Grant Nos.12102201,U2341244).
文摘An experimental and finite element simulation investigation are conducted to study the deformation patterns of steel targets during the penetration process of tungsten alloy long rods,as well as the influence of strength of the target on the deformation patterns.The experimental results revealed slight mass loss in the first layer of the steel target during the transient entrance phase,with an extremely negligible loss in target mass during the quasi-steady penetration phase.The results of macro-analysis,micro-analysis and simulation show that the eroded target material migrated towards the periphery of the crater,causing an increase in the target's thickness,remained within the target,instead of flowing out of the crater.Therefore,the process of long rods penetrating the metal target is considered as a process of backward extrusion.By combining the backward extrusion theory with energy conservation,a penetration depth model for long rods penetrating a metal target,taking into account both the diameter of the crater and the friction coefficient between the rod and the target,has been established.Although the model is not yet perfect,it innovatively applies the principles of solid mechanics to the study of long rod penetration.Additionally,it takes into account the friction coefficient between the rod and the target during the penetration process.Therefore,this model provides a new research direction for future studies on long rod penetration.
基金supported by the National Natural Science Foundation of China (Project No.72301293)。
文摘Target maneuver recognition is a prerequisite for air combat situation awareness,trajectory prediction,threat assessment and maneuver decision.To get rid of the dependence of the current target maneuver recognition method on empirical criteria and sample data,and automatically and adaptively complete the task of extracting the target maneuver pattern,in this paper,an air combat maneuver pattern extraction based on time series segmentation and clustering analysis is proposed by combining autoencoder,G-G clustering algorithm and the selective ensemble clustering analysis algorithm.Firstly,the autoencoder is used to extract key features of maneuvering trajectory to remove the impacts of redundant variables and reduce the data dimension;Then,taking the time information into account,the segmentation of Maneuver characteristic time series is realized with the improved FSTS-AEGG algorithm,and a large number of maneuver primitives are extracted;Finally,the maneuver primitives are grouped into some categories by using the selective ensemble multiple time series clustering algorithm,which can prove that each class represents a maneuver action.The maneuver pattern extraction method is applied to small scale air combat trajectory and can recognize and correctly partition at least 71.3%of maneuver actions,indicating that the method is effective and satisfies the requirements for engineering accuracy.In addition,this method can provide data support for various target maneuvering recognition methods proposed in the literature,greatly reduce the workload and improve the recognition accuracy.
文摘In order to research the feasibility of using the selective adsorption principle to achieve automatic shaping of nano patterns,in this study,using the liquid gallium as the conductive ink and graphene as the printing plate surface,by changing the surface wettability of patterned areas on the nanoscale of graphene printed boards,the automatic formation of liquid gallium patterns on the graphene printed plate surface was simulated.The results indicated that liquid gallium can achieve automatic patterning on the surface of graphene patterned areas;the greater the interaction energy between gallium and carbon atoms,the clearer the pattern;gallium liquid is prone to remain in complex local positions of the pattern,making it difficult to shape the pattern;if the spacing between adjacent pattern lines is too large or too small,it will result in residual gallium liquid between the lines;increasing the thickness of the gallium film will cause the pattern to expand beyond the boundary,but increasing the thickness of the gallium film can also enhance the thickness and uniformity of the pattern lines.In summary,the principle of selective adsorption can be used to achieve the automatic formation of nano patterns,and the pattern formation effect is influenced by factors such as atomic interaction energy and pattern configuration.
基金Jiangsu Water Science and Technology Project(2021081)。
文摘The rapid identification of planting patterns for major crops in a large irrigated district has vital importance for irrigation management,water fee collection,and crop yield estimation.In this study,the OTSU algorithm and Mean-Shift algorithm were employed to automatically determine threshold values for mapping two main rotated crop patterns at the pixel scale.A time series analysis was conducted to extract the spatial distribution of rice-wheat and wheat-maize rotations in the Chuanhang irrigation district from 2016 to 2020.The results demonstrate that both threshold segmentation algorithms are reliable in extracting the spatial distribution of the crops,with an overall accuracy exceeding 80%.Additionally,both Kappa coefficients surpass 0.7,indicating better performance by OTSU method.Over the period from 2016 to 2020,the area occupied by rice-wheat rotation cropping ranged from 12500 to 14400 hm 2;whereas wheat-maize rotation cropping exhibited smaller and more variable areas ranging from 19730 to 34070 hm 2.These findings highlight how remote sensing-based approaches can provide reliable support for rapidly and accurately identifying the spatial distribution of main crop rotation patterns within a large irrigation district.
文摘Looking upon every encoding state of quantum information systems as a quantum information pattern, A kind of pattern-distance between different patterns as a measurement of comparability of quantum information patterns is defined, and two kinds of recognition algorithms based on pattern-distance for quantum information are proposed. They can respectively recognize quantum information with known objective pattern and unknown objective pattern. In the two algorithms, the phases and occurrence probabilities of different eigenpattems of quantum information are sufficiently considered. Two examples demonstrate the feasibility and effectiveness of the two recognition methods. These algorithms point out a new and important path for applications of quantum information and pattern recognition.
文摘Given a set U which is consisted of strings defined on alphabet Σ, string cross pattern matching is to find all the matches between every two strings in U. It is utilized in text processing like removing the duplication of strings. This paper presents a fast string cross pattern matching algorithm based on extracting high frequency strings. Compared with existing algorithms including single-pattern algorithms and multi-pattern matching algorithms, this algorithm is featured by both low time complexity and low space complexity. Because Chinese alphabet is large and the average length of Chinese words is much short, this algorithm is more suitable to process the text written by Chinese, especially when the size of Σ is large and the number of strings is far more than the maximum length of strings of set U.
基金supported by the Fundamental Research Funds for the Central Universities(YWF-13D2-XX-13)the National High-tech Research and Development Program(863 Program)(2008AA121802)
文摘A hybrid method for synthesizing antenna＇s three dimensional （3D） pattern is proposed to obtain the low sidelobe feature of truncated cone conformal phased arrays. In this method, the elements of truncated cone conformal phased arrays are projected to the tangent plane in one generatrix of the truncated cone. Then two dimensional （2D） Chebyshev amplitude distribution optimization is respectively used in two mutual vertical directions of the tangent plane. According to the location of the elements, the excitation current amplitude distribution of each element on the conformal structure is derived reversely, then the excitation current amplitude is further optimized by using the genetic algorithm （GA）. A truncated cone problem with 8x8 elements on it, and a 3D pattern desired side lobe level （SLL） up to 35 dB, is studied. By using the hybrid method, the optimal goal is accomplished with acceptable CPU time, which indicates that this hybrid method for the low sidelobe synthesis is feasible.
基金Project(2012CB725301)supported by the National Basic Research Program of ChinaProject(201412015)supported by the National Special Fund for Surveying and Mapping Geographic Information Scientific Research in the Public Welfare of ChinaProject(212000168)supported by the Basic Survey-Mapping Program of National Administration of Surveying,Mapping and Geoinformation of China
文摘An automatic three-dimensional(3D) reconstruction method based on four-view stereo vision using checkerboard pattern is presented. Mismatches easily exist in traditional binocular stereo matching due to the repeatable or similar features of binocular images. In order to reduce the probability of mismatching and improve the measure precision, a four-camera measurement system which can add extra matching constraints and offer multiple measurements is applied in this work. Moreover, a series of different checkerboard patterns are projected onto the object to obtain dense feature points and remove mismatched points. Finally, the 3D model is generated by performing Delaunay triangulation and texture mapping on the point cloud obtained by four-view matching. This method was tested on the 3D reconstruction of a terracotta soldier sculpture and the Buddhas in the Mogao Grottoes. Their point clouds without mismatched points were obtained and less processing time was consumed in most cases relative to binocular matching. These good reconstructed models show the effectiveness of the method.
基金Project(51305023) supported by the National Natural Science Foundation of ChinaProject(FRF-GF-17-B20) supported by the Fundamental Research Funds for the Central Universities of China
文摘This work describes an experimental investigation into the influence of geometric micro-groove texture patterns on the tribological performance of stainless steel.Five geometries were studied:one with untextured and four with micro-groove textured making parallel,triangular,square and hexagonal patterns.The micro-groove textures were produced using an MFT-20laser system as well as a two-step laser surface texturing(LST)process.Tribological performance was measured using a pin-on-disk tribometer.The investigation showed that the two-step LST process could fabricate high-precision micro-grooves.The experimental data indicated that the micro-groove textured surfaces achieved the lower frictional coefficients than the untextured surface and the geometric patterns had significantly affected the tribological properties of samples in both lubricated and unlubricated states.The results were analyzed from the lubricant supplying and fluid dynamic pressure effect under lubricated conditions as well as abrasive capture and remove under dry friction conditions.
