The effect of salt solutions(NaCl,Na2SO4 and CaCl2) on the conformational properties of partially hydrolyzed polyacrylamide(HPAM) was investigated by using static laser light scattering(SLLS).The special interaction b...The effect of salt solutions(NaCl,Na2SO4 and CaCl2) on the conformational properties of partially hydrolyzed polyacrylamide(HPAM) was investigated by using static laser light scattering(SLLS).The special interaction between CaCl2 solution and HPAM was also researched.Experimental results show that the chain structure of HPAM is interrelated with the charge density,the kind and the concentration of salt solutions.The mean-square radius of gyration(Rz) and the second virial coefficient(A2) of HPAM decrease with increasing concentration of salt solutions,and the salt effect tends towards the maximum when the concentration of salt solution is increased to some amount.展开更多
The performance of hydroxamic polyacrylamide(HPAM) in mineral flotation was tested on the samples of calcite, diaspore and pyrite. It is found that HPAM expresses intensive depression on pyrite and can be used as effe...The performance of hydroxamic polyacrylamide(HPAM) in mineral flotation was tested on the samples of calcite, diaspore and pyrite. It is found that HPAM expresses intensive depression on pyrite and can be used as effective depressants for pyrite. The depression mechanism of HPAM to pyrite was investigated by the determination of contact angle, zeta potential, adsorptive capacity for collectors and infrared spectrum. A lower contact angle, more negative zeta potential, less xanthate adsorptive capacity, and the formation of chemical bonding were determined, which reveals that the strong chemical interactions exist between HPAM and pyrite surface. The group electronegativity of HPAM was calculated to explain the differences of interaction between reagent and minerals.展开更多
Hydroxamated polyacrylamide（HPAM） was synthesized from polyacrylamide（PAM） with high relative molecular mass under the optimum reaction conditions（p H 12 and a molar ratio of hydroxylamine to amide groups of 1.5 ...Hydroxamated polyacrylamide（HPAM） was synthesized from polyacrylamide（PAM） with high relative molecular mass under the optimum reaction conditions（p H 12 and a molar ratio of hydroxylamine to amide groups of 1.5 at 50 ℃for 12 h）. The hydroxamate groups of HPAM were verified by Fourier transform infrared spectrum（FT-IR）. 46%（molar fration） hydroxamate groups and 23%（molar fraction） carbonyl groups on HPAM were determined by conductometric titration combined with Kjeldahl＇s microanalysis method. The settling performance achieved at different flocculant dosages was investigated with high goethite-containing red mud slurry of simulated Bayer process synthesized in laboratory. It turns out that the settling performance of high goethite-containing red mud was better with HPAM. The average settling rate of red mud in the first 5 min and the turbidity of supernatant after settling for 30 min are 2.36 m/h and 507 NTU, respectively, at a flocculant dosage of 120 g/t, which is similar to that achieved with Hx-600.展开更多
Selective flocculation is a new method to solve the problem of China's bauxite de-silication besides flotation and reverse flotation. The method of selective flocculation of bauxite using hydrolyzed polyacrylamide...Selective flocculation is a new method to solve the problem of China's bauxite de-silication besides flotation and reverse flotation. The method of selective flocculation of bauxite using hydrolyzed polyacrylamide as flocculant was experimented and evaluated. The results of diaspore and kaolinite single mineral settling tests show that the difference between settlement yield of kaolinite(settling 15 min) and diaspore(settling 3 min) increases from 16% to 60% by adding flocculant at pH=7. Results of selective flocculation experiment of bauxite show that the higher concentrate grade(65.75) and Al-Si ratio(7.34) could be obtained with sodium carbonate as dispersant compared with sodium hexametaphosphate; under the action of flocculating agent, the concentrate grade and Al-Si ratio increase to 67.99 and 9.01. These results could meet the requirements of Bayer production, and the simpler process was expected to cost far less than traditional flotation method and a promising de-silication method of bauxite.展开更多
A new kind of polyacrylamide derivate, hydroximic polyacrylamide (HPAM), was prepared from polyacrylamide (PAM) with hydroxylamine hydrochloride in KOH/alcohol solution. Based on colorimetric method in the measurement...A new kind of polyacrylamide derivate, hydroximic polyacrylamide (HPAM), was prepared from polyacrylamide (PAM) with hydroxylamine hydrochloride in KOH/alcohol solution. Based on colorimetric method in the measurement of C 7 9 alkyl hydroximic acid, the substitution degree of HPAM was determined by selecting octyl hydroximic acid as a primary standard substance. The effects of temperature, the amount of hydroxylamine and potassium hydroxide, and the reaction time on the reaction are discussed. HPAM with 5.78% substitution of degree was acquired by optimizing the reaction conditions. IR spectra revealed that tautomerism appears in the HPAM, and that HPAM exists in both the forms of hydroxamic type and hydroximic type, and the latter type can easily lead to the forming of intramolecular hydrogen bond.展开更多
The viscoelastic behavior of polyacrylamide solution is crucial for its application in various industries.The mixed polyacrylamide solution was prepared by mixing polyacrylamide with different relative molecular masse...The viscoelastic behavior of polyacrylamide solution is crucial for its application in various industries.The mixed polyacrylamide solution was prepared by mixing polyacrylamide with different relative molecular masses according to the defined mass fraction.The viscosity and elasticity of mixed polyacrylamide solution were separately tested with RS150 rheometer and capillary breakup extensional rheometer and compared with those of the single polyacrylamide solution which is directly provided by manufacturer without any mixing.The results indicate that the mixed and single polyacrylamide solutions have the same shear viscosity and intrinsic viscosity.However,some mixed polyacrylamide solutions have higher elasticity than single polyacrylamide solution.The flow resistance of mixed polyacrylamide with higher elasticity is also greater than that of single polyacrylamide solution in porous medium.This paper presents an effective method of mixing polyacrylamides with different relative molecular masses,which can enhance the elasticity of polyacrylamide solution and flowing resistance through porous medium.展开更多
The residue drying area(RDA)is the major source of fugitive red sand(RS)dust emissions in the bauxite mining industry and causes serious environmental and safety detriments.Polymer stabilizer(PS)is one of the promisin...The residue drying area(RDA)is the major source of fugitive red sand(RS)dust emissions in the bauxite mining industry and causes serious environmental and safety detriments.Polymer stabilizer(PS)is one of the promising non-traditional stabilizers to mitigate such issues.This research investigated the unconfined compressive strength(UCS)of RS using synthetic polymer stabilizer(SPS)and natural polymer stabilizer(NPS),and to determine the optimum application concentration and mixing ratio of the PAM and Guar gum mixture.Results illustrated that PAM apparently outperform Guar gum in stabilizing sand particles.The mixture of PAM and Guar gum is more effective than individual use.The optimum polymer concentration and the mixing ratio are 0.94 wt.%and 0.6(PAM:total(PAM+Guar gum)),respectively.A rigorous regression model was developed to predict the UCS value based on application concentration and mixing ratio for the purpose of cost and time efficiency.展开更多
The rheological properties of salt-tolerant partially hydrolyzed polyacrylamide(HPAM)solutions with molecular of 2.5×107 g/mol at different concentrations were measured in steady-state shear flow mode by Haake Rh...The rheological properties of salt-tolerant partially hydrolyzed polyacrylamide(HPAM)solutions with molecular of 2.5×107 g/mol at different concentrations were measured in steady-state shear flow mode by Haake Rheostress 150 rheometer.Three constitutive equations(Oldroyd four constant model,Guesekus model and FENE-P model) were used for describing the apparent viscosity and first normal stress difference.The apparent viscosity of salt-tolerant HPAM solutions appears a first Newtonian zone when the shear rate is approximately lower than 0.2 s-1.At high shear rate,the HPAM solutions show shear-thinning and elasticity.The results show that the FENE-P model has the best agreement between theoretical and experimental data within the available shear rate range.The material parameters are useful for numerical analysis of polymer solution flow fields.展开更多
Introduction Cells can sense and respond to the mechanical microenvironment by converting forces into biochemical signals inside the cells,i.e.mechanotransduction<sup>[1-3]</sup>.Focal adhesions are the ma...Introduction Cells can sense and respond to the mechanical microenvironment by converting forces into biochemical signals inside the cells,i.e.mechanotransduction<sup>[1-3]</sup>.Focal adhesions are the major sites of interaction between a cell and its extracellular matrix（ECM）microenvironment,thus outside mechanical signals can be sensed at focal adhesions through transmembrane receptor integrins.In particular,it has been shown that matrix elasticity can control the cell fate<sup>[4]</sup>by modulating the interactions between ECM proteins and their receptor integrins<sup>[5,6]</sup>.For example,different rigidity of polyacrylamide（PA）gels can lead to different density of ECM ancho-展开更多
Poly(acrylamide-co-sodium acrylate)(PAM/AA-Na) and poly(acrylamide-co-sodium vinylsulfonate)(PAM/VSS-Na) were prepared by inverse emulsion polymerization.The effects of CaCl2 on PAM/VSS-Na or PAM/VSS-Na aqueous soluti...Poly(acrylamide-co-sodium acrylate)(PAM/AA-Na) and poly(acrylamide-co-sodium vinylsulfonate)(PAM/VSS-Na) were prepared by inverse emulsion polymerization.The effects of CaCl2 on PAM/VSS-Na or PAM/VSS-Na aqueous solutions were investigated by steady-flow experiments at 25,40,55 and 70 ℃.The results show that the apparent viscosities of both solutions decrease with addition of CaCl2 or increase of temperature and shear rates.PAM/VSS-Na solution has better performance on the salt tolerance,shear endurance and temperature resistance due to containing sulfonic group in the molecules.Ca2+ concentration can affect the viscous activation energy of both solutions and the reason may be that these interactions between Ca2+ and also copolymer molecules are related to temperature and competitive in solution.These results may offer the basic data for searching the flooding systems with the ability of temperature resistance,salt tolerance and shear endurance for tertiary oil recovery.展开更多
The distribution of salivary acidic proline-rich proteins pheno-types was investigated by using the ultra-thin PAGIEF technique in 258 ChineseHan populations in Liaoning area. The gene frequencies were as follows: Pr^...The distribution of salivary acidic proline-rich proteins pheno-types was investigated by using the ultra-thin PAGIEF technique in 258 ChineseHan populations in Liaoning area. The gene frequencies were as follows: Pr^10.8101, Pr^20.1899; Db^+0.0416, Db^-0.9584; Pa^+0.1717, Pa^-0.8283; PIF^+0.6647, PIF^-0.3353. The observed numbers of the phenotypes are in good a-greement with the expected numbers under the Hardy-Weinberg equilibrium.The gene frequencies among the Chinese and other populations are compared.展开更多
The difference in protein content, MDH,POD and COD isozymes have been seenbetween lowland rice roots and upland rice roots during root growth and development. High pro-tein content has been examined in upland rice roo...The difference in protein content, MDH,POD and COD isozymes have been seenbetween lowland rice roots and upland rice roots during root growth and development. High pro-tein content has been examined in upland rice roots,but isozyme bands in lowland rice roots aremore than that in upland rice roots.Total area of POD isozyme bands at seedling and tilleringstages of upland rice is larger than that of lowland rice.The POD isozymes zymogram in the rootof upland rice is more stable compared with that of lowland rice.More COD isozyme numbershave been showed in roots of upland rice,but the relative activity of COD isozyme in roots of up-land rice at the seedling and tillering stages is lower than that of lowland rice.COD<sub>7</sub> band can beshown in upland rice root at flowering stage,but it is absent in lowland rice.Therefore,COD<sub>7</sub>,band can be taken as an index for resistance of the upland rice to drought environment.展开更多
Water shutoff through injection wells is one of the most important techniques used for water injection profile control and modification in severely heterogeneous reservoirs,aiming at stabilizing oil production.It has ...Water shutoff through injection wells is one of the most important techniques used for water injection profile control and modification in severely heterogeneous reservoirs,aiming at stabilizing oil production.It has been widely reported that the effectiveness and efficiency of water shutoff using gel is mostly dependent on the gel dynamic sealing properties in the porous media.Firstly the gelation strength and gelation time of polymer gel were evaluated.Then,core flowing experiments were conducted before and after gelation in a 32 m long sand pack.In addition,water flooding core experiments were also carried out in a long core of 80 cm before and after injecting gel system to check the reliability of this evaluation method.The experimental results show that moderate-strength gel can be formed at 65 °C.According to the integrated evaluation of the plugging coefficient,plugging strength and water breakthrough time,the gel particles are capable of migrating to a distance of 7.47 m from the injection point of the 32 m long sand pack during the water injection process after gelation.Based on sands gelation status and effluent analyses,the effective migration distance of the gel particles is 4-14 m.Through the core flooding experiments using the 80 cm heterogeneous core,it is evidenced that the gel can be formed in the deep reservoir(40.63% of total length) with the plugging strength as high as 6.33 MPa/m,which leads to extra oil recovery of 10.55% of original oil in place(OOIP) by water flooding after gel treatment.展开更多
基金Project(50673033) supported by the National Natural Science Foundation of China
文摘The effect of salt solutions(NaCl,Na2SO4 and CaCl2) on the conformational properties of partially hydrolyzed polyacrylamide(HPAM) was investigated by using static laser light scattering(SLLS).The special interaction between CaCl2 solution and HPAM was also researched.Experimental results show that the chain structure of HPAM is interrelated with the charge density,the kind and the concentration of salt solutions.The mean-square radius of gyration(Rz) and the second virial coefficient(A2) of HPAM decrease with increasing concentration of salt solutions,and the salt effect tends towards the maximum when the concentration of salt solution is increased to some amount.
文摘The performance of hydroxamic polyacrylamide(HPAM) in mineral flotation was tested on the samples of calcite, diaspore and pyrite. It is found that HPAM expresses intensive depression on pyrite and can be used as effective depressants for pyrite. The depression mechanism of HPAM to pyrite was investigated by the determination of contact angle, zeta potential, adsorptive capacity for collectors and infrared spectrum. A lower contact angle, more negative zeta potential, less xanthate adsorptive capacity, and the formation of chemical bonding were determined, which reveals that the strong chemical interactions exist between HPAM and pyrite surface. The group electronegativity of HPAM was calculated to explain the differences of interaction between reagent and minerals.
基金Project(51174231)supported by the National Natural Science Foundation of China
文摘Hydroxamated polyacrylamide（HPAM） was synthesized from polyacrylamide（PAM） with high relative molecular mass under the optimum reaction conditions（p H 12 and a molar ratio of hydroxylamine to amide groups of 1.5 at 50 ℃for 12 h）. The hydroxamate groups of HPAM were verified by Fourier transform infrared spectrum（FT-IR）. 46%（molar fration） hydroxamate groups and 23%（molar fraction） carbonyl groups on HPAM were determined by conductometric titration combined with Kjeldahl＇s microanalysis method. The settling performance achieved at different flocculant dosages was investigated with high goethite-containing red mud slurry of simulated Bayer process synthesized in laboratory. It turns out that the settling performance of high goethite-containing red mud was better with HPAM. The average settling rate of red mud in the first 5 min and the turbidity of supernatant after settling for 30 min are 2.36 m/h and 507 NTU, respectively, at a flocculant dosage of 120 g/t, which is similar to that achieved with Hx-600.
基金Project(2005CB623701)supported by the National Key Basic Research Program(973)of China
文摘Selective flocculation is a new method to solve the problem of China's bauxite de-silication besides flotation and reverse flotation. The method of selective flocculation of bauxite using hydrolyzed polyacrylamide as flocculant was experimented and evaluated. The results of diaspore and kaolinite single mineral settling tests show that the difference between settlement yield of kaolinite(settling 15 min) and diaspore(settling 3 min) increases from 16% to 60% by adding flocculant at pH=7. Results of selective flocculation experiment of bauxite show that the higher concentrate grade(65.75) and Al-Si ratio(7.34) could be obtained with sodium carbonate as dispersant compared with sodium hexametaphosphate; under the action of flocculating agent, the concentrate grade and Al-Si ratio increase to 67.99 and 9.01. These results could meet the requirements of Bayer production, and the simpler process was expected to cost far less than traditional flotation method and a promising de-silication method of bauxite.
文摘A new kind of polyacrylamide derivate, hydroximic polyacrylamide (HPAM), was prepared from polyacrylamide (PAM) with hydroxylamine hydrochloride in KOH/alcohol solution. Based on colorimetric method in the measurement of C 7 9 alkyl hydroximic acid, the substitution degree of HPAM was determined by selecting octyl hydroximic acid as a primary standard substance. The effects of temperature, the amount of hydroxylamine and potassium hydroxide, and the reaction time on the reaction are discussed. HPAM with 5.78% substitution of degree was acquired by optimizing the reaction conditions. IR spectra revealed that tautomerism appears in the HPAM, and that HPAM exists in both the forms of hydroxamic type and hydroximic type, and the latter type can easily lead to the forming of intramolecular hydrogen bond.
文摘The viscoelastic behavior of polyacrylamide solution is crucial for its application in various industries.The mixed polyacrylamide solution was prepared by mixing polyacrylamide with different relative molecular masses according to the defined mass fraction.The viscosity and elasticity of mixed polyacrylamide solution were separately tested with RS150 rheometer and capillary breakup extensional rheometer and compared with those of the single polyacrylamide solution which is directly provided by manufacturer without any mixing.The results indicate that the mixed and single polyacrylamide solutions have the same shear viscosity and intrinsic viscosity.However,some mixed polyacrylamide solutions have higher elasticity than single polyacrylamide solution.The flow resistance of mixed polyacrylamide with higher elasticity is also greater than that of single polyacrylamide solution in porous medium.This paper presents an effective method of mixing polyacrylamides with different relative molecular masses,which can enhance the elasticity of polyacrylamide solution and flowing resistance through porous medium.
基金Project(2016YFC0501103)supported by the National Key Research and Development Program of ChinaProject(51574222)supported by the General Program of National Science Foundation of China+1 种基金Project(SKLCRSM15KF01)supported by Independent Research Projects of State Key Laboratory of Coal Resources and Safe Mining,CUMT,ChinaProject(2015)supported by the Mining Education Australia Collaborative Research Grant Scheme
文摘The residue drying area(RDA)is the major source of fugitive red sand(RS)dust emissions in the bauxite mining industry and causes serious environmental and safety detriments.Polymer stabilizer(PS)is one of the promising non-traditional stabilizers to mitigate such issues.This research investigated the unconfined compressive strength(UCS)of RS using synthetic polymer stabilizer(SPS)and natural polymer stabilizer(NPS),and to determine the optimum application concentration and mixing ratio of the PAM and Guar gum mixture.Results illustrated that PAM apparently outperform Guar gum in stabilizing sand particles.The mixture of PAM and Guar gum is more effective than individual use.The optimum polymer concentration and the mixing ratio are 0.94 wt.%and 0.6(PAM:total(PAM+Guar gum)),respectively.A rigorous regression model was developed to predict the UCS value based on application concentration and mixing ratio for the purpose of cost and time efficiency.
基金Project(07JCZDJC02600) supported by the Natural Science Foundation ofTianjin,China
文摘The rheological properties of salt-tolerant partially hydrolyzed polyacrylamide(HPAM)solutions with molecular of 2.5×107 g/mol at different concentrations were measured in steady-state shear flow mode by Haake Rheostress 150 rheometer.Three constitutive equations(Oldroyd four constant model,Guesekus model and FENE-P model) were used for describing the apparent viscosity and first normal stress difference.The apparent viscosity of salt-tolerant HPAM solutions appears a first Newtonian zone when the shear rate is approximately lower than 0.2 s-1.At high shear rate,the HPAM solutions show shear-thinning and elasticity.The results show that the FENE-P model has the best agreement between theoretical and experimental data within the available shear rate range.The material parameters are useful for numerical analysis of polymer solution flow fields.
基金supported in part by NIH HL098472NSF CBET0846429
文摘Introduction Cells can sense and respond to the mechanical microenvironment by converting forces into biochemical signals inside the cells,i.e.mechanotransduction<sup>[1-3]</sup>.Focal adhesions are the major sites of interaction between a cell and its extracellular matrix（ECM）microenvironment,thus outside mechanical signals can be sensed at focal adhesions through transmembrane receptor integrins.In particular,it has been shown that matrix elasticity can control the cell fate<sup>[4]</sup>by modulating the interactions between ECM proteins and their receptor integrins<sup>[5,6]</sup>.For example,different rigidity of polyacrylamide（PA）gels can lead to different density of ECM ancho-
基金Project(0610005) supported by the Natural Science Foundation of Jinan City,ChinaProject(200603085) supported by the Postdoctoral Research Foundation of Shandong Province,China
文摘Poly(acrylamide-co-sodium acrylate)(PAM/AA-Na) and poly(acrylamide-co-sodium vinylsulfonate)(PAM/VSS-Na) were prepared by inverse emulsion polymerization.The effects of CaCl2 on PAM/VSS-Na or PAM/VSS-Na aqueous solutions were investigated by steady-flow experiments at 25,40,55 and 70 ℃.The results show that the apparent viscosities of both solutions decrease with addition of CaCl2 or increase of temperature and shear rates.PAM/VSS-Na solution has better performance on the salt tolerance,shear endurance and temperature resistance due to containing sulfonic group in the molecules.Ca2+ concentration can affect the viscous activation energy of both solutions and the reason may be that these interactions between Ca2+ and also copolymer molecules are related to temperature and competitive in solution.These results may offer the basic data for searching the flooding systems with the ability of temperature resistance,salt tolerance and shear endurance for tertiary oil recovery.
文摘The distribution of salivary acidic proline-rich proteins pheno-types was investigated by using the ultra-thin PAGIEF technique in 258 ChineseHan populations in Liaoning area. The gene frequencies were as follows: Pr^10.8101, Pr^20.1899; Db^+0.0416, Db^-0.9584; Pa^+0.1717, Pa^-0.8283; PIF^+0.6647, PIF^-0.3353. The observed numbers of the phenotypes are in good a-greement with the expected numbers under the Hardy-Weinberg equilibrium.The gene frequencies among the Chinese and other populations are compared.
文摘The difference in protein content, MDH,POD and COD isozymes have been seenbetween lowland rice roots and upland rice roots during root growth and development. High pro-tein content has been examined in upland rice roots,but isozyme bands in lowland rice roots aremore than that in upland rice roots.Total area of POD isozyme bands at seedling and tilleringstages of upland rice is larger than that of lowland rice.The POD isozymes zymogram in the rootof upland rice is more stable compared with that of lowland rice.More COD isozyme numbershave been showed in roots of upland rice,but the relative activity of COD isozyme in roots of up-land rice at the seedling and tillering stages is lower than that of lowland rice.COD<sub>7</sub> band can beshown in upland rice root at flowering stage,but it is absent in lowland rice.Therefore,COD<sub>7</sub>,band can be taken as an index for resistance of the upland rice to drought environment.
基金Project(2011ZX05009-004)supported by the National Significant Science and Technology Program of China
文摘Water shutoff through injection wells is one of the most important techniques used for water injection profile control and modification in severely heterogeneous reservoirs,aiming at stabilizing oil production.It has been widely reported that the effectiveness and efficiency of water shutoff using gel is mostly dependent on the gel dynamic sealing properties in the porous media.Firstly the gelation strength and gelation time of polymer gel were evaluated.Then,core flowing experiments were conducted before and after gelation in a 32 m long sand pack.In addition,water flooding core experiments were also carried out in a long core of 80 cm before and after injecting gel system to check the reliability of this evaluation method.The experimental results show that moderate-strength gel can be formed at 65 °C.According to the integrated evaluation of the plugging coefficient,plugging strength and water breakthrough time,the gel particles are capable of migrating to a distance of 7.47 m from the injection point of the 32 m long sand pack during the water injection process after gelation.Based on sands gelation status and effluent analyses,the effective migration distance of the gel particles is 4-14 m.Through the core flooding experiments using the 80 cm heterogeneous core,it is evidenced that the gel can be formed in the deep reservoir(40.63% of total length) with the plugging strength as high as 6.33 MPa/m,which leads to extra oil recovery of 10.55% of original oil in place(OOIP) by water flooding after gel treatment.
