Scatterometer is an instrument which provides all-day and large-scale wind field information, and its application especially to wind retrieval always attracts meteorologists. Certain reasons cause large direction erro...Scatterometer is an instrument which provides all-day and large-scale wind field information, and its application especially to wind retrieval always attracts meteorologists. Certain reasons cause large direction error, so it is important to find where the error mainly comes. Does it mainly result from the background field, the normalized radar cross-section （NRCS） or the method of wind retrieval？ It is valuable to research. First, depending on SDP2.0, the simulated ＇true＇ NRCS is calculated from the simulated ＇true＇ wind through the geophysical mode] function NSCAT2. The simulated background field is configured by adding a noise to the simulated ＇true＇ wind with the non-divergence constraint. Also, the simulated ＇measured＇ NRCS is formed by adding a noise to the simulated ＇true＇ NRCS. Then, the sensitivity experiments are taken, and the new method of regularization is used to improve the ambiguity removal with simulation experiments. The results show that the accuracy of wind retrieval is more sensitive to the noise in the background than in the measured NRCS; compared with the two-dimensional variational （2DVAR） ambiguity removal method, the accuracy of wind retrieval can be improved with the new method of Tikhonov regularization through choosing an appropriate regularization parameter, especially for the case of large error in the background. The work will provide important information and a new method for the wind retrieval with real data.展开更多
The model of a three-terminal thermoelectric refrigerator with ideal tunneling quantum dots is established. It consists of a cavity connected to two quantum dots embedded between two electron reservoirs at different t...The model of a three-terminal thermoelectric refrigerator with ideal tunneling quantum dots is established. It consists of a cavity connected to two quantum dots embedded between two electron reservoirs at different temperatures and chemical potentials. According to the Landauer formula the expressions for the heat current, the cooling rate and the coefficient of performance （COP） are derived analytically. The performance characteristic curves of the cooling rate versus the coefficient of performance are plotted with numerical calculation. The optimal regions of the cooling rate and the COP are determined. Moreover, we optimize the cooling rate and the COP with respect to the position of energy level of the right quantum dot, respectively. The influence of the width of energy level and the temperature ratio on performance of the three-terminal thermoelectric refrigerator is analyzed. Lastly, when the width of energy level is small enough, the optimal performance of the refrigerator is discussed in detail.展开更多
This paper describes a new design of the neutral beam manifold based on a more optimized support system.A proposed alternative scheme has presented to replace the former complex manifold supports and internal pipe sup...This paper describes a new design of the neutral beam manifold based on a more optimized support system.A proposed alternative scheme has presented to replace the former complex manifold supports and internal pipe supports in the final design phase.Both the structural reliability and feasibility were confirmed with detailed analyses.Comparative analyses between two typical types of manifold support scheme were performed.All relevant results of mechanical analyses for typical operation scenarios and fault conditions are presented.Future optimization activities are described,which will give useful information for a refined setting of components in the next phase.展开更多
A new algorithm for reconstructing the three-dimensional flow field of the oceanic mesoscale eddies is proposed in this paper,based on variational method.Firstly,with the numerical differentiation Tikhonov regularizer...A new algorithm for reconstructing the three-dimensional flow field of the oceanic mesoscale eddies is proposed in this paper,based on variational method.Firstly,with the numerical differentiation Tikhonov regularizer,we reconstruct the continuous horizontal flow field on discrete grid points at each layer in the oceanic region,in terms of the horizontal flow field observations.Secondly,benefitting from the variational optimization analysis and its improvement,we reconstruct a three-dimensional flow field under the constraint of the horizontal flow and the vertical flow.The results of simulation experiments validate that the relative error of the new algorithm is lower than that of the finite difference method in the case of high grid resolution,which still holds in the case of unknown observational errors or in the absence of vertical velocity boundary conditions.Finally,using the reanalysis horizontal data sourcing from SODA and the proposed algorithm,we reconstruct three-dimensional flow field structure for the real oceanic mesoscale eddy.展开更多
The paper focuses on the optimal control of natural resources in mining industry. The purpose is to pro- pose an optimal extraction series of these resources during the lifetime of the Mine＇s maintenance. Fol- lowing...The paper focuses on the optimal control of natural resources in mining industry. The purpose is to pro- pose an optimal extraction series of these resources during the lifetime of the Mine＇s maintenance. Fol- lowing the proposed optimal control model, a sensitivity analysis has been performed that includes the interest rate impact on the optimal solution. This study shows that the increasing of the interest rate sti- mulates faster extraction of the resources. The discounting factor induces that the resource has to be extracted faster hut this effect is counterbalanced by the diminishing returns of the annual cash flow. At higher parameters of ＂alpha＂ close to one of the power function about 80% from the whole resource will be extracted during the first 4 years of object/mine maintenance. An existence of unique positive root with respect to return of investment has been proposed and proved by two ways： by the ＂method of chords＂ and by using specialized software.展开更多
Bimetallic clusters have aroused tremendous interest because the property changes like structure,size,and composition have occurred.Herein,a structural search of the global minimum for anionic LiMg_(n)^(-)(n=2-11) clu...Bimetallic clusters have aroused tremendous interest because the property changes like structure,size,and composition have occurred.Herein,a structural search of the global minimum for anionic LiMg_(n)^(-)(n=2-11) clusters is performed using an efficient crystal structure analysis by particle swarm optimization(CALYPSO) structural searching program with subsequent density functional theory(DFT) calculations.A great variety of low energetic isomers are converged,and the most stable ones are confirmed by comparing their total energy of each size.It is found that the LiMg_(n)^(-)clusters are structurally consistent with corresponding Mg clusters anions except for LiMg_(5)^(-)and LiMg_(7)^(-).In all the doped clusters,the Li atom prefers to occupy the convex position.Simulated photoelectron spectra(PES),Infrared(IR),and Raman spectra of LiMg_(n)^(-)could be used as an essential evidence for identifying cluster structures experimentally in the future.Stability study reveals that a tower-like structure of LiMg_(9)^(-)has prominent stability and can be identified as a magic number cluster.The reason might be that there are both closed-shell 1S^(2)1P^(6)1D^(10)2S^(2) electronic configurations and stronger Li-Mg bonds caused by sp hybridization in the LiMg_(9)^(-)cluster.展开更多
Based on monotonicity analysis and computer symbolic manipulating technique,a procedure for determining constraints compatibility in design optimization hasbeen proposed in this paper. By using the proposed method rel...Based on monotonicity analysis and computer symbolic manipulating technique,a procedure for determining constraints compatibility in design optimization hasbeen proposed in this paper. By using the proposed method relationshipsbetween constrains can be determined and the optimization is greatly simplifid.The method is code with intelligent production systems.展开更多
In order to reduce the risk of sealing and improve the structural strength for a coal mine mobile refuge chamber,a new type of one-piece model was designed.Mechanical and mathematical calculation performed an importan...In order to reduce the risk of sealing and improve the structural strength for a coal mine mobile refuge chamber,a new type of one-piece model was designed.Mechanical and mathematical calculation performed an important role.Calculated according to statics and relevant contents,the structure had the same total volume as the traditional segmented structure,but had shorter length,wider width and greater height.Those prevented the structure from stress or deformation failure.Some reinforcing ribs with enough moments of inertia were welded in the external shell.Because of the one-piece structure,this refuge chamber reduced the risk of sealing which was a serious problem of segmented structure.Impact load with 300 ms duration and0.6 MPa over-pressure was settled.Explicit nonlinear dynamic analysis program was used to simulate the response of the refuge chamber.The maximum stress and the maximum displacement were obtained.The refuge chamber including blast airtight doors could meet the rigidity requirement.Weak parts of the chamber were the front and back end shell where bigger displacement values occurred than others.Thus,the calculation indicated that the refuge chamber could meet structural safety requirements.Based on the numerical analysis,suggestions were put forward for further resistance ability improvement.Only large inclined shaft with larger wellhead was suitable for this one-piece coal mine mobile refuge chamber.展开更多
基金supported by the National Natural Science Foundation of China (Grant No. 40775023)
文摘Scatterometer is an instrument which provides all-day and large-scale wind field information, and its application especially to wind retrieval always attracts meteorologists. Certain reasons cause large direction error, so it is important to find where the error mainly comes. Does it mainly result from the background field, the normalized radar cross-section （NRCS） or the method of wind retrieval？ It is valuable to research. First, depending on SDP2.0, the simulated ＇true＇ NRCS is calculated from the simulated ＇true＇ wind through the geophysical mode] function NSCAT2. The simulated background field is configured by adding a noise to the simulated ＇true＇ wind with the non-divergence constraint. Also, the simulated ＇measured＇ NRCS is formed by adding a noise to the simulated ＇true＇ NRCS. Then, the sensitivity experiments are taken, and the new method of regularization is used to improve the ambiguity removal with simulation experiments. The results show that the accuracy of wind retrieval is more sensitive to the noise in the background than in the measured NRCS; compared with the two-dimensional variational （2DVAR） ambiguity removal method, the accuracy of wind retrieval can be improved with the new method of Tikhonov regularization through choosing an appropriate regularization parameter, especially for the case of large error in the background. The work will provide important information and a new method for the wind retrieval with real data.
基金Supported by the National Natural Science Foundation of China under Grant No 11365015
文摘The model of a three-terminal thermoelectric refrigerator with ideal tunneling quantum dots is established. It consists of a cavity connected to two quantum dots embedded between two electron reservoirs at different temperatures and chemical potentials. According to the Landauer formula the expressions for the heat current, the cooling rate and the coefficient of performance （COP） are derived analytically. The performance characteristic curves of the cooling rate versus the coefficient of performance are plotted with numerical calculation. The optimal regions of the cooling rate and the COP are determined. Moreover, we optimize the cooling rate and the COP with respect to the position of energy level of the right quantum dot, respectively. The influence of the width of energy level and the temperature ratio on performance of the three-terminal thermoelectric refrigerator is analyzed. Lastly, when the width of energy level is small enough, the optimal performance of the refrigerator is discussed in detail.
文摘This paper describes a new design of the neutral beam manifold based on a more optimized support system.A proposed alternative scheme has presented to replace the former complex manifold supports and internal pipe supports in the final design phase.Both the structural reliability and feasibility were confirmed with detailed analyses.Comparative analyses between two typical types of manifold support scheme were performed.All relevant results of mechanical analyses for typical operation scenarios and fault conditions are presented.Future optimization activities are described,which will give useful information for a refined setting of components in the next phase.
基金Project sported by the National Natural Science Foundation of China(Grant Nos.41875045 and 61371119)the Blue Project of Jiangsu Province,China。
文摘A new algorithm for reconstructing the three-dimensional flow field of the oceanic mesoscale eddies is proposed in this paper,based on variational method.Firstly,with the numerical differentiation Tikhonov regularizer,we reconstruct the continuous horizontal flow field on discrete grid points at each layer in the oceanic region,in terms of the horizontal flow field observations.Secondly,benefitting from the variational optimization analysis and its improvement,we reconstruct a three-dimensional flow field under the constraint of the horizontal flow and the vertical flow.The results of simulation experiments validate that the relative error of the new algorithm is lower than that of the finite difference method in the case of high grid resolution,which still holds in the case of unknown observational errors or in the absence of vertical velocity boundary conditions.Finally,using the reanalysis horizontal data sourcing from SODA and the proposed algorithm,we reconstruct three-dimensional flow field structure for the real oceanic mesoscale eddy.
文摘The paper focuses on the optimal control of natural resources in mining industry. The purpose is to pro- pose an optimal extraction series of these resources during the lifetime of the Mine＇s maintenance. Fol- lowing the proposed optimal control model, a sensitivity analysis has been performed that includes the interest rate impact on the optimal solution. This study shows that the increasing of the interest rate sti- mulates faster extraction of the resources. The discounting factor induces that the resource has to be extracted faster hut this effect is counterbalanced by the diminishing returns of the annual cash flow. At higher parameters of ＂alpha＂ close to one of the power function about 80% from the whole resource will be extracted during the first 4 years of object/mine maintenance. An existence of unique positive root with respect to return of investment has been proposed and proved by two ways： by the ＂method of chords＂ and by using specialized software.
基金Project supported by the National Natural Science Foundation of China(Grant No.11404008)the Innovation Training Program for College Students of Shanxi Province of China(Grant No.S201910721061)the Innovation Training Program for College Students of Baoji University of Arts and Sciences(Grant No.20191XJ087)。
文摘Bimetallic clusters have aroused tremendous interest because the property changes like structure,size,and composition have occurred.Herein,a structural search of the global minimum for anionic LiMg_(n)^(-)(n=2-11) clusters is performed using an efficient crystal structure analysis by particle swarm optimization(CALYPSO) structural searching program with subsequent density functional theory(DFT) calculations.A great variety of low energetic isomers are converged,and the most stable ones are confirmed by comparing their total energy of each size.It is found that the LiMg_(n)^(-)clusters are structurally consistent with corresponding Mg clusters anions except for LiMg_(5)^(-)and LiMg_(7)^(-).In all the doped clusters,the Li atom prefers to occupy the convex position.Simulated photoelectron spectra(PES),Infrared(IR),and Raman spectra of LiMg_(n)^(-)could be used as an essential evidence for identifying cluster structures experimentally in the future.Stability study reveals that a tower-like structure of LiMg_(9)^(-)has prominent stability and can be identified as a magic number cluster.The reason might be that there are both closed-shell 1S^(2)1P^(6)1D^(10)2S^(2) electronic configurations and stronger Li-Mg bonds caused by sp hybridization in the LiMg_(9)^(-)cluster.
文摘Based on monotonicity analysis and computer symbolic manipulating technique,a procedure for determining constraints compatibility in design optimization hasbeen proposed in this paper. By using the proposed method relationshipsbetween constrains can be determined and the optimization is greatly simplifid.The method is code with intelligent production systems.
基金Supported by the Major State Basic Research Development Program of China(973Project)(2011CB706900)
文摘In order to reduce the risk of sealing and improve the structural strength for a coal mine mobile refuge chamber,a new type of one-piece model was designed.Mechanical and mathematical calculation performed an important role.Calculated according to statics and relevant contents,the structure had the same total volume as the traditional segmented structure,but had shorter length,wider width and greater height.Those prevented the structure from stress or deformation failure.Some reinforcing ribs with enough moments of inertia were welded in the external shell.Because of the one-piece structure,this refuge chamber reduced the risk of sealing which was a serious problem of segmented structure.Impact load with 300 ms duration and0.6 MPa over-pressure was settled.Explicit nonlinear dynamic analysis program was used to simulate the response of the refuge chamber.The maximum stress and the maximum displacement were obtained.The refuge chamber including blast airtight doors could meet the rigidity requirement.Weak parts of the chamber were the front and back end shell where bigger displacement values occurred than others.Thus,the calculation indicated that the refuge chamber could meet structural safety requirements.Based on the numerical analysis,suggestions were put forward for further resistance ability improvement.Only large inclined shaft with larger wellhead was suitable for this one-piece coal mine mobile refuge chamber.
